See how this page can help with your next step.
Direct Answer: Yes, SeaText supports multiple domains, but each domain requires its own account. Every account is tied to a single primary URL. To use SeaText on a second website, create a new account, copy its JavaScript snippet, and install it on that domain. Development URLs like localhost are restricted. Traffic and reporting stay isolated per account, so you get clean data for each site.
Yes, you can use SeaText on more than one domain. But each domain needs its own account. One account works with one primary URL. If you have two websites, create two accounts.
The official documentation says: 'If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain. Each SEATEXT AI account is linked to a single primary URL.'
So the answer is yes — multiple domains are fully supported. Just set up one account per domain.
Your primary URL is the main web address linked to your SeaText account. When you install SeaText, you copy a JavaScript code snippet from that account and paste it onto your site. SeaText uses that domain to associate traffic and activate agents.
Because the account is locked to one URL, all settings, reports, and agent activity stay scoped to that site. No data leaks between domains. This design keeps each site's analytics clean and your security tight.
Why can't you change the URL later? The source material does not describe a way to reassign a primary URL. If you need to move an account to a new domain, contact SeaText support first.
Follow these steps to add SeaText to another website:
Each account has its own unique JavaScript snippet. Do not copy the code from one account to another domain. That would mix traffic data and break the association.
SeaText links every visitor session to the domain where the account's JavaScript is installed. Because each account has a different snippet, traffic from Site A goes to Account A, and traffic from Site B goes to Account B.
Reporting is completely separate. You see conversion rates, keyword matches, and agent activity only for that one domain. No cross-contamination. This isolation is critical for paid ad campaigns. If you run Google Ads, you need to know which keyword drove a conversion on which site. Separate accounts give you that clarity.
If you ignored the rule and used the same account on two domains, reports would blend data from both sites. You would not know whether a conversion came from a visitor on Site A or Site B. That makes optimization impossible.
| Scenario | One account | Multiple accounts |
|---|---|---|
| Number of domains | 1 | 2+ |
| Traffic data | Clean, single-source | Clean, separated per domain |
| Agent settings | Shared across one site | Independent per domain |
| Setup complexity | Low | Medium (one account per domain) |
| Cost | One subscription | Multiple subscriptions (check pricing) |
| Best for | Single website or brand | Multiple businesses, client sites, or dev + production |
If you manage a single website, one account is enough. If you run several distinct businesses or need a development environment separate from production, use multiple accounts. Each account operates independently, so you can tailor agents and settings per site.
The source pack does not state whether you can change the primary URL after signup. If you need to move an account to a new domain, contact SeaText support before assuming it is possible. Do not simply install the same code on a different domain — that mixes traffic.
Staging sites often live on a subdomain like staging.example.com. The source material does not clarify whether a subdomain counts as the same primary URL. If your staging site is on a separate domain (e.g., staging-example.com), it needs its own account. For subdomains, check with SeaText support. Mixed-traffic risk: if you install the same account on both a production domain and a staging subdomain, visitor data from both will merge. That confuses your reports.
Ignoring the one-account-per-domain rule leads to mixed data. You might see a conversion and not know which site caused it. Ad campaigns become harder to optimize. Refund claims for bot traffic become unreliable because you cannot trace the invalid session to a specific domain. Always use separate accounts for separate domains.
localhost and dynamic development domains are not allowed. SeaText cannot reliably associate traffic with your account when the domain changes or is not publicly accessible. Use a real, valid domain even for testing. If you must test locally, use a public staging domain with a separate account.
No. If the test site is on a different domain, it needs its own account. Use a separate account for each domain.
You still need a valid real domain. Localhost is restricted. Dynamic development domains may not work. Create a separate account for the staging domain.
No. Each SeaText account has its own code linked to one primary URL. Use the code from the account made for each specific domain.
Yes, because you need a separate account. The documentation says to create one account for each website.
The source pack does not say. Contact SeaText support for the current policy on changing the primary URL.
Yes, multiple websites are supported — just not on the same account. Create one account per website.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: To add a second domain, create a separate SeaText AI account for that domain and verify the new domain from that account. Each SeaText AI account is linked to a single primary URL. That is why you cannot simply add another domain to your existing account.
To add a second domain, create a separate SeaText AI account for that domain and verify the new domain from that account. Each SeaText AI account is linked to a single primary URL. That is why you cannot simply add another domain to your existing account.
| Criterion | Option A: One account for multiple domains | Option B: Separate account per domain |
|---|---|---|
| Supported by SeaText AI | No | Yes |
| Domain verification | Not available for a second domain | Required for each new domain |
| Traffic association | Unreliable for dynamic development domains | Reliable per primary URL |
| Security restrictions | No workaround for localhost | Uses valid real domains only |
| Recommendation | Avoid for production use | Use for every domain |
Who Option A fits: It does not fit any SeaText AI setup, because the account model does not support it.
Who Option B fits: Anyone who needs SeaText AI on more than one domain, including development and production pairs.
SeaText AI links each account to one primary URL. This design keeps the script, verification, and traffic data tied to a single website. If you want to use SeaText AI on a second domain, you need a separate account for that domain.
This article explains why the rule exists, how the account-domain relationship works, and how to complete the setup. It also covers common mistakes, limitations, and useful follow-up questions.
SeaText AI states that each account is linked to a single primary URL. The rule exists so the service can associate traffic with the right account.
When SeaText AI reads a visitor session, it needs to know which website it is working on. If one account could serve many domains, the service could not reliably tell which domain generated the traffic.
This matters because SeaText AI reacts to each visitor and each page. It rewrites headlines, offers, and CTAs. It also tracks results by page, keyword, and version. That data only makes sense when it is attached to one known domain.
The same logic applies when you use multiple websites. For each website, you create one account. The source pack says: “To use SEATEXT AI on several websites, create one account for each website.”
Follow these steps to add a second domain. They assume you already have a valid domain and access to its DNS or hosting settings.
Make sure the domain is public and reachable. SeaText AI does not support development URLs such as localhost for security reasons.
You also need control over DNS records or file uploads. That control is required for verification.
Go to the SeaText AI website and create a new account. Do not try to add the second domain to your existing account.
Use an email address you can access. You will need it to receive verification instructions and account updates.
If you have a development domain and a production domain, create a separate account for each. Do not share one account between them.
After account creation, SeaText AI gives you a JavaScript snippet. Copy it exactly as provided.
For Shopify, open Online Store → Themes → Edit code. Find the layout file called theme.liquid. Paste the snippet there and save.
For other platforms, add the snippet to every page where SeaText AI should run. The installation process is secure, and the AI remains inert until activated.
SeaText AI needs to confirm that you control the domain. Follow the on-screen instructions. They may include adding a DNS record or uploading a verification file.
Verification is required before the domain can be used as an active site.
After verification succeeds, check your dashboard. The new domain should appear in your list of active sites.
You can also inspect your live page. View the page source and confirm the SEATEXT script is present. A data- attribute should appear after integration.
Verification proves that you control the domain. It also links the new account to the correct primary URL.
Once the script is installed, open the page in a browser and use developer tools to inspect the HTML source. Confirm that the SEATEXT script is present.
After integration, a data- attribute should appear. That attribute helps confirm the script is active on the page.
The script remains inactive until you activate it. This protects your website content during setup.
After activation, SeaText AI can start reading visitor behavior. It may then adapt copy, test variants, translate content, or run other agents you enabled.
This fails because one account is linked to one primary URL. Create a separate account instead.
Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
Dynamic development domains may not function properly. SeaText AI may not reliably associate traffic with your account on those domains. Use a stable public domain.
Verification is required before active use. Without it, the domain will not appear as an active site.
For full coverage, add the snippet to the site layout or all pages. On Shopify, theme.liquid is the standard place.
Inspect the source for the SEATEXT script. After integration, a data- attribute should appear. Do not rely on an invented domain-specific marker.
SeaText AI restricts some URLs by design. Here is what the source pack says.
Development URLs such as localhost are restricted for security reasons. You must use a valid, real domain.
Dynamic development domains may not function properly because SeaText AI may be unable to reliably associate traffic with your account.
This means you should avoid frequently changing subdomains, preview URLs, or temporary hosting links. They may not work even if they are publicly reachable.
Each account remains limited to one primary URL. This is the core security and data boundary.
If you need SeaText AI on multiple websites, create one account for each website. This applies to development and production domains as well.
Each domain needs its own separate SeaText AI account. The source pack does not say that you must use different email addresses.
For reliable setup, use an email address you can access for each account. Check with the vendor if your email provider or account rules create a conflict.
Yes. The source pack says that if you need to use SeaText AI on multiple domains, including a development domain and a production domain, you must create separate accounts for each domain.
Do not share one account across both. Each account is linked to a single primary URL.
A valid domain is a real, publicly reachable domain that you control. It must not be localhost or a restricted development URL.
Dynamic development domains may not work reliably. Choose a stable domain for testing if you need SeaText AI to associate traffic correctly.
The domain becomes active after you complete verification. SeaText AI says verification is needed before active use.
Check your dashboard for the domain to appear as an active site. Also confirm the script is present in the page source.
The source pack does not describe a domain-switching process. It states that each account is linked to a single primary URL and that you should create separate accounts for additional domains.
If you need to change domains, contact SeaText AI support or check the vendor’s documentation. Do not assume you can move an account freely.
| Fact | Detail |
|---|---|
| Account-domain relationship | Each SeaText AI account is linked to a single primary URL. |
| Multiple domains requirement | Create separate accounts for each domain. |
| Development URLs | URLs such as localhost are restricted for security reasons. |
| Dynamic development domains | May not function properly; traffic association can be unreliable. |
| Verification | Verification is needed before active use. |
| Script check | Confirm the SEATEXT script is in the page source; a data- attribute appears after integration. |
| Multiple websites | Use one account for each website. |
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI treats each subdomain as an independent domain. You must create a separate SeaText account for every subdomain you want to use. This design isolates settings, agents, analytics, and billing per store.
Yes. SeaText AI treats subdomains as separate domains. If you run store1.example.com and store2.example.com you need a dedicated SeaText account for each subdomain.
Each account links to one primary URL. The platform does not allow a single account to cover both example.com and shop.example.com.
When you add a subdomain SeaText creates a distinct website entry. The integration code you copy from the dashboard is unique to that account.
According to the Shopify integration guide, multiple domains require separate accounts because each account is linked to a single primary URL.
This architecture prevents cross‑domain data mixing. AI agents such as the Google Ads Landing Page Agent or the Ecommerce Product Copy Agent operate only on the domain they are configured for.
Separate accounts give each store its own:
Isolation helps when you test new features on a staging subdomain before rolling out to production. It also keeps regional stores such as us.example.com and eu.example.com independent.
| Fact | Detail |
|---|---|
| Subdomain treatment | Treated as a separate domain – requires its own SeaText account |
| Account per domain | Each SeaText account links to a single primary URL |
| Multiple websites | Create one account per website including subdomains |
| Development/staging use | Allowed if using a real domain (not localhost or dynamic dev domains) |
| Security | Development URLs like localhost are restricted |
Source: SeaText Shopify Integration page
The main limitation is that you cannot manage multiple subdomains under one SeaText account.
This separation protects data. A configuration error on one store does not affect others. It also lets you assign different team members to different stores.
If you manage many subdomains consider consolidating under a single domain with subdirectories (example.com/store1, example.com/store2). SeaText supports subdirectories within one account because the primary URL covers the whole domain.
| Criterion | Subdomain (separate account) | Subdirectory (single account) |
|---|---|---|
| Account count | One per subdomain | One for all subdirectories |
| Billing | Separate invoices | Single invoice |
| Data isolation | Full isolation | Shared data pool |
| Agent configuration | Independent per store | Shared across paths |
| Team access | Per‑account permissions | Global permissions |
| Setup effort | Higher (multiple installs) | Lower (single install) |
Choose subdomains when stores need completely independent branding, compliance, or billing. Choose subdirectories when you want centralized management and lower overhead.
Each SeaText account carries its own subscription. Pricing details are on the pricing page. You pay per account, not per domain group.
If you need volume discounts contact sales. The platform does not automatically aggregate usage across accounts.
SeaText restricts development URLs such as localhost for security reasons. Dynamic development domains generated by some hosting platforms may not work reliably.
Use a static, publicly resolvable subdomain (e.g., staging.example.com) for testing. The integration guide explicitly warns that localhost and similar addresses are blocked.
Because each subdomain has its own account you can invite different users to each account. This lets a regional team manage eu.example.com while another team manages us.example.com.
There is no built‑in cross‑account role management. You must configure permissions separately in each dashboard.
SeaText does not provide a one‑click clone of an account. To replicate settings you must manually recreate agents, integrations, and custom rules in the new account.
Export any custom dictionaries or translation memories from the old account and import them into the new one if the feature supports it. Check the documentation for current import/export capabilities.
No. Each subdomain is considered a separate domain. You need a separate account for blog.example.com.
Subdirectories are part of the same domain. A single SeaText account for example.com covers example.com/blog automatically.
Yes. Each subdomain requires its own subscription. Check the pricing page for current plans.
Yes, if it is a real domain. Dynamic development domains may not work reliably. Use a static subdomain.
There is no built‑in cloning feature. You must manually reconfigure each agent and integration for the new account.
Not directly. Each subdomain needs its own account and code snippet. Wildcard setups are not supported.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Your AI-generated content stays with the SeaText account linked to your original domain. When you add a new domain, you need a separate SeaText account for it, and that new account starts fresh. Your original content is not moved, copied, or overwritten.
Your AI-generated content stays on the account that created it. When you add a new domain to SeaText, the content from your original domain is not copied, moved, or overwritten. SeaText links each account to a single primary URL, so a new domain needs its own account. That new account starts clean.
In short: old content stays, new content grows separately. That is by design, not an accident.
If you added a new domain and now see no AI-generated content, check the account first.
If you ignore the one-account-per-domain rule, you might install SeaText on the new domain and see nothing appear. The system may not associate traffic with that account, and the content you expect will not show up.
SeaText expects one account per primary URL. The integration guide says: 'If you need to use SEATEXT AI on multiple domains, you must create separate accounts for each domain.' That is the supported setup, not a workaround.
You have two practical choices:
| Situation | What SeaText expects |
|---|---|
| One website | One account linked to one primary URL. |
| Multiple websites | One account for each website. |
| Development domain like localhost | Restricted. Use a real, valid domain. |
| Dynamic development domain | May not function because traffic association is unreliable. |
See the SeaText integration guide for the exact steps.
SeaText can generate several kinds of content on your site. The types include product descriptions, translations, rewritten headlines, and calls to action. None of that content is moved, copied, or overwritten when you add a new domain.
Each of these is tied to the account and primary URL that produced it. A new domain has its own account and starts with none of that history.
Separate accounts protect content and keep tracking reliable. If one account served many domains, SeaText could not tell which domain a visit came from. That would make traffic reporting and content association muddy.
The separation also keeps your existing content safe. The installation process is secure, and the AI remains inert until activated. Installing a script does not rewrite, delete, or move anything by itself.
Follow this order:
If the new domain runs on Shopify, the integration guide also explains where to place the tag in your theme and product template.
The Shopify integration guide gives exact file locations. Use these steps after you create the new SeaText account.
Verification matters. A tag that is missing or placed in the wrong file will not generate the content you expect. The saved change should be visible in the page source before you activate any agents.
One account per primary URL protects attribution. Attribution tells SeaText which domain generated a visit, which content changed, and which agent earned a result.
If you reuse one account across domains, traffic becomes blurred. A visitor on the new domain may be recorded against the old domain, or the account may not associate with the new domain at all. Content reports become unreliable. The AI may not know which site to rewrite or translate.
Another risk is accidental overwrite. The source pack states that shared accounts are not supported. Even if a script installs cleanly, the account still points to the original primary URL. The new domain is not a supported target, and the content you expect may never appear.
The supported path is simple: create a separate account, install its tag, and leave the original account untouched. This costs a few minutes and keeps each domain's data clean.
This example is hypothetical, but it follows SeaText's account rules.
Imagine you sell coffee at northsidecoffee.com and you open a second shop at southsidecoffee.com. Your first account has already generated product descriptions, translations, and page copy. When you add southsidecoffee.com, none of that content carries over automatically. You create a separate SeaText account for the new domain, install the script, and activate the agents you want. The new domain starts fresh. Your northside content stays on northsidecoffee.com.
That is the cleanest mental model: each domain is its own content world.
| Fact | What it means for you |
|---|---|
| Each SeaText account is linked to a single primary URL. | One account serves one domain. |
| Multiple domains require separate accounts. | Do not try to point one account at several domains. |
| Multiple websites require one account per website. | Each website gets its own account. |
| Development URLs like localhost are restricted. | Use a valid, real domain for testing. |
| Dynamic development domains may fail. | SeaText may not reliably associate traffic with the account. |
| The AI remains inert until activated. | Installing the script does not change your content. |
The biggest limitation is the one-account-per-domain rule. You cannot attach two primary domains to one SeaText account. Trying to do so can break traffic association and content tracking.
Development domains are a common trip point. Localhost is blocked for security reasons. Dynamic development domains may not work because SeaText might not be able to reliably associate traffic with your account. If you need a test site, use a stable real domain.
This article covers adding a new domain. It does not cover changing your primary domain or merging accounts. The source pack does not describe a migration path, so treat any domain replacement as a separate setup.
No. The original account stays with its primary URL and its content. A new account for a new domain does not erase anything.
Yes. Each SeaText account is linked to a single primary URL, so multiple domains mean multiple accounts.
No. You must create separate accounts. Development URLs like localhost are restricted, and dynamic development domains may not work reliably.
The account is already linked to the original primary URL, so the new domain may not associate correctly with that account. The supported path is a new account for the new domain.
No. The AI remains inert until you activate it, so the installation by itself does not modify content.
No. Changing the primary domain is a separate process. The source pack does not describe a migration or domain-switch path, so treat it as a new setup decision.
Use a stable, real domain instead. Localhost is restricted, and dynamic development domains may not work because traffic cannot be reliably associated with the account. Create the new account with a valid domain before testing.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Use one SeaText account per domain. SeaText binds each account to a single primary URL, so separate domains, environments, or brands need separate accounts with their own integration code.
SeaText is built around a strict rule: each account is linked to exactly one primary URL. The integration script you install on your site reports back to that single account. When the same script runs on a second domain, SeaText cannot tell which site the traffic belongs to.
This causes visible problems fast. Translations written for one brand can appear on another. Headline rewrites tested on a staging site can leak to your live homepage. Conversion-rate agents can swap CTAs across sites that target different audiences.
The fix is simple but non-negotiable: create one SeaText account for every domain you want to manage. This includes production sites, staging sites, development environments, subdomains you treat as separate businesses, and unrelated brand sites under the same company.
When you sign up, you set a primary URL inside the account settings. SeaText stores that URL as part of the account identity. The JavaScript snippet you receive contains a unique account reference. When a visitor loads a page, the snippet reads that reference and ships page data, keyword data, and reading telemetry to the matching account.
If you paste the same snippet on two domains, both sites send data into the same bucket. SeaText then treats every visitor as if they came from the primary URL you registered. Analytics get blurred. A/B variants trained on one audience get served to another. Translation memory gets shared, which is dangerous when the two brands use different tone, pricing, or compliance language.
The system also checks the domain that loads the page. If the domain does not match the account's primary URL, behavior is unreliable. Localhost is blocked. Dynamic tunneling URLs (like ngrok subdomains that change every session) often fail to associate traffic at all.
The most common mix-up we see is the staging-to-production copy-paste. A team installs SeaText on a staging site, runs tests, likes the results, then copies the same snippet into the live theme.
From that moment, two things go wrong:
The same mistake happens with brand sites. A company running two stores under different names installs one snippet to save time. Within days, the translation agent rewrites both sites with the same tone. One brand ends up sounding like the other.
Another frequent error is treating subdomains as part of the parent domain. blog.example.com and shop.example.com look related, but to SeaText they are different URLs. If you want separate content rules, headlines, or translations per subdomain, create a separate account for each.
theme.liquid before the closing </body> tag. For other platforms, follow the matching guide and paste before </body>.data- attribute SeaText adds is present. This proves the right account is active on the right domain.Not every site needs its own SeaText account. Use this checklist to decide.
If you run a single site with multiple sections, you do not need multiple accounts. SeaText agents can manage different sections inside one account tied to one URL.
You run Brand A at branda.com and Brand B at brandb.com. Create two SeaText accounts. Each account gets its own translation memory, CRO experiments, and reading telemetry. The Translation Agent will not leak Brand A's tone into Brand B's pages.
Your live site is example.com. Your staging site is staging.example.com. Create two accounts, one for each URL. Never copy the production snippet into staging, or vice versa. When you finish testing on staging, remove the snippet before promoting the theme.
You serve es.example.com and fr.example.com. If you want Spanish and French content to evolve independently, give each subdomain its own account. If you want one unified translation memory across both, you can keep one account and treat language switching as a single-domain problem, but only if both subdomains are part of the same business logic and you accept the shared memory trade-off.
You build a new site at localhost:3000. SeaText will not work on localhost. Set up a real dev domain like dev.example.com, register it as a separate account, and test there. Move the snippet to production once you launch.
SeaText's one-account-per-domain rule is strict on purpose. There is no official workaround. The system will not let one account serve multiple distinct primary URLs.
Wildcard domains are not supported. Each distinct hostname needs its own account.
Dynamic development URLs are unreliable. If your tunneling tool gives you a new hostname every session, SeaText cannot bind traffic to your account consistently. Use a fixed dev domain instead.
The integration snippet is safe to install and the AI stays inactive until you turn it on, so you can stage and test without changing what visitors see.
Installation usually takes under one minute for standard platforms, but verification, environment setup, and per-domain account creation can add time when you manage many sites.
No. Create two accounts, one for staging and one for production. Using one account causes test content to leak into your live site.
SeaText may apply translations, headlines, or CTAs trained on one domain to the other. Remove the snippet from the wrong domain, then create a new account for that domain.
Yes, if you want independent content, CRO, or translation rules. blog.example.com and shop.example.com are separate URLs to SeaText.
Yes. Use a clear account name per domain so you can tell accounts apart in the dashboard.
No. Each distinct hostname needs its own account and snippet.
No. Localhost and similar development URLs are restricted. Use a real dev domain with its own account.
Under one minute for most platforms, plus the time to create and verify a separate account per domain.
Yes. The AI stays inert until you activate it, so installation does not change what visitors see.
These external sources provide additional context for managing content across multiple domains. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI links each account to a single primary URL. You cannot manage multiple domains from one account. For each additional domain — including development, staging, or production sites — you must create a separate SeaText AI account. This article explains the limit, why it exists, how to set up multiple domains correctly, and what restrictions apply to localhost and dynamic URLs.
SeaText AI ties every account to one primary URL. There is no option to manage several domains from the same account. If you need SeaText AI on more than one domain, create one account for each domain.
SeaText AI does not cap the number of domains you can own. Instead, each SeaText AI account can handle exactly one primary domain. That means the limit is not about how many domains you can manage total, but how many domains one account can manage.
If you run two websites, you need two SeaText AI accounts. If you run ten websites, you need ten accounts. The source documentation confirms: "Each SEATEXT AI account is linked to a single primary URL."
So the direct answer to the question is: yes, there is a limit per account — one domain each. But there is no stated maximum number of accounts, so the total number of domains you can cover depends only on how many accounts you create.
SeaText AI optimizes pages, rewrites copy, and attributes behavior to a specific site. That work only makes sense if the traffic data is associated with the correct domain.
The documentation warns that SeaText AI might be unable to reliably associate traffic with your account when a development domain is dynamic. The same logic applies across different domains. If one account tracked two separate sites, reporting and agent decisions would blur together.
Separate accounts keep each domain's sessions, conversions, and bot-detection evidence clean and auditable. You can compare performance across domains without mixing the numbers.
You can manage multiple domains by giving each one its own account and its own installation code. The setup is the same for each site.
Do not reuse the same account across two domains. The script is tied to the account's primary URL, so reuse will not work reliably.
After you paste the SeaText AI code, check that the page still loads normally and that the script appears in the source.
For Shopify, the documentation specifically mentions verifying the data- attribute is present in the HTML source after editing the product template.
If you follow a typical website workflow, you have a development site, a staging site, and a production site. With SeaText AI, each of those requires its own account, because each has a distinct URL.
You might be tempted to install the production script on a staging site temporarily. That creates a risk: the script expects to receive traffic for its primary URL, and staging traffic may not match the account correctly.
The safer path is to use separate accounts for development and production, or to run SeaText AI only on the production domain and keep development testing outside the script.
| Factor | What SeaText AI says |
|---|---|
| Account-to-domain relationship | Each SEATEXT AI account is linked to a single primary URL. |
| Multiple domains | Create separate accounts for each domain, such as a development domain and a production domain. |
| Localhost | Restricted for security reasons. |
| Dynamic development domains | May not work reliably because traffic association can fail. |
| Multiple websites | Use one account for each website. |
Plan your SeaText AI accounts the same way you plan your domains. Each site needs its own account, its own installation code, and its own settings.
If you run a staging site, treat it as a separate domain with a separate account. Do not point a valid production domain at a local host or a dynamic subdomain and expect reliable data.
Keep a simple list of which account belongs to which domain. That makes it easier to manage billing, agent settings, and reports as you add new sites.
Not every domain needs SeaText AI right away. Start with the sites that generate or receive the most paid traffic, because those are where keyword-aware rewriting and bot refunds have the most impact.
Add a separate account for each production domain that runs paid ads, sells products, or needs translation. Defer development and testing domains until you can give them a valid, real URL that SeaText AI can track reliably.
No. Each account is linked to one primary URL, so you need one account per website.
The documentation does not state a maximum number of accounts. If you need many domains, you can create an account for each one.
The documentation does not specify subdomains. Treat a subdomain as a separate URL and confirm with SeaText before relying on it.
No. Localhost is restricted for security reasons. Use a valid, real domain for testing, or use a separate real development domain.
Yes. You copy the installation code from each account and add it to that account's assigned domain.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: To remove a domain from SeaText AI, go to Settings > Domains, select the domain, and click 'Remove'. Because each SeaText AI account is linked to a single primary URL, removing the domain effectively deactivates that account's connection to your website. This guide covers prerequisites, step-by-step instructions, what happens after removal, key facts about domain management, limitations, common mistakes, and answers to frequently asked questions.
Remove a domain from SeaText AI by navigating to Settings > Domains, selecting the domain you want to remove, and clicking Remove. This action severs the link between your SeaText AI account and that website, stopping all AI agents from running on the domain.
After removing the domain, all SeaText AI agents stop working on that website. The tracking script becomes inactive, and no new data is collected. Any historical data associated with the domain remains in your account for a limited time, but you can no longer use the account to optimize that domain. According to SeaText AI documentation, each account is linked to a single primary URL, so removal effectively deactivates the account's connection to that site. You should export reports, copy variants, and custom configurations before removal if you need them for reference or migration.
| Fact | Details |
|---|---|
| Account per domain | Each SeaText AI account is linked to a single primary URL. You cannot use the same account on multiple domains. |
| Separate accounts needed | To use SeaText AI on multiple websites, create a separate account for each domain. |
| Development URLs restricted | Localhost and dynamic development domains are not allowed. Use a real, valid domain. |
| Removal effect | Removing the domain deactivates all AI agents tied to that account. |
Removing a domain does not delete your SeaText AI account itself. The account remains active but without any domain assigned. You can later add a new domain to the same account, but this is only possible if the account is not already linked to another domain. If you need to switch domains entirely, you may need to create a new account for the new domain and delete the old account.
There is no way to temporarily pause a domain; removal is permanent for that account. To preserve settings, consider creating a new account and transferring any custom configurations manually before removal. Switching domains versus adding a new domain: if you remove a domain and immediately add a different one to the same account, the account must have no domain assigned at that moment. If you attempt to add a new domain while the old one is still attached, the system will prevent it. Manual preservation of settings involves exporting copy variants, agent configurations, and historical reports, then reapplying them in the new account.
One common mistake is removing a domain without exporting historical data first. Once removed, you lose access to the dashboard for that domain, and while data may be retained for a period, you cannot retrieve it through the interface. Another mistake is assuming you can re-add the same domain to the same account later. The system prevents re-adding a previously removed domain to the same account; you must create a new account for that domain. Users also forget to update the SeaText AI script on their website after removal, leaving dead code that can affect page load performance. Finally, some users try to use a single account for multiple domains by removing and adding domains repeatedly, which violates the one-account-per-domain policy and can lead to account suspension.
No. Once removed, you cannot re-add the same domain to the same account. You would need to create a new account for that domain.
No, the account remains but becomes inactive since no domain is attached. You can delete the account separately if needed.
All agents stop running on the removed domain. Custom settings, copy variants, and historical data may be retained for a period but cannot be used without an active domain.
Yes, but only if the account currently has no domain assigned. If you remove a domain, you can immediately add a new domain to that account.
Removal is instant. The SeaText AI script on your website will stop working within minutes as the servers update.
You cannot transfer an account to another domain directly. Each SeaText AI account is permanently linked to a single primary URL. To use SeaText AI on a different domain, you must create a new account for that domain and manually recreate any desired settings.
No. Each SeaText AI account operates independently. Removing a domain from one account does not impact other accounts you may own. However, if you use the same email for multiple accounts, you will still access each account separately.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, you can duplicate settings from an existing domain when creating a new one. Each SeaText AI account is linked to a single primary URL, so you cannot move an account. Instead, you create a new account for the new domain and manually replicate agents and rules.
Yes, you can duplicate settings from an existing domain when creating a new one. SeaText does not support moving an account from one domain to another. Each account is tied to one primary URL. To use SeaText on a new domain, you create a separate account and manually rebuild the configuration.
SeaText reads visitor behavior and rewrites content in real time. The service must know which traffic belongs to which account. The documentation states: "Each SEATEXT AI account is linked to a single primary URL." This one-to-one link keeps analytics, session data, and AI rewrites clean. If one account served two domains, the AI would mix up customizations such as CRO settings, translation preferences, and ad-campaign rewrites.
The same rule applies to multiple websites. The guide says: "Using SEATEXT AI on Multiple Websites To use SEATEXT AI on several websites, create one account for each website." This rule is the authoritative source for all domain-related limits.
You do not lose the product capabilities. SeaText includes agents for CRO optimization, website translation, Google Ads landing page rewriting, bot protection, and more. When you create a new account, you can activate the same agents again. However, there is no export or clone feature. You must manually note which agents were active and any custom rules such as translation languages or keyword-specific headline changes. Then you recreate those choices in the new dashboard.
Follow these steps to replicate your configuration on a new domain:
This process works for staging-to-production moves, rebrands, or launching a second store.
Many users ask about transferring settings because they have a staging site and a live site. SeaText treats them as two different primary URLs. You need a separate account for each. The documentation warns: "Development URLs, such as localhost, are restricted for security reasons." A local address like http://localhost:3000 will not work. Also, "Dynamic development domains may not function properly" because SeaText might not reliably associate traffic with your account. Use a real, stable domain for testing.
No. The documentation does not mention an export or clone feature. You must manually recreate settings.
No. The guide says you must create separate accounts for each domain.
No. The account remains linked to the original primary URL. No automatic transfer occurs.
Create a new account, then manually activate the same agents and configure the same rules.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText requires a separate account for each domain. This gives isolated analytics, independent SEO settings, and independent agent activation. Learn how to set up, configure, and manage multiple SeaText accounts.
To manage multiple domains with SeaText, you must create a separate SeaText account for each domain. This account‑per‑domain setup is the most useful feature because it provides isolated analytics, independent SEO settings, and independent agent activation. Each account links to a single primary URL (Source S1).
Below is a quick comparison to help you decide which option fits your situation.
| Criterion | Single SeaText account | Separate SeaText accounts (one per domain) |
|---|---|---|
| Domains supported | One primary URL only | One account per domain (e.g., 3‑6 domains = 3‑6 accounts) |
| Data separation | Mixed analytics across sites | Fully isolated analytics per domain |
| Agent activation | Same agents on all sites | Independent agent activation per account |
| SEO settings | Shared keyword and local settings | Domain‑specific SEO configuration |
| Billing | One plan covers all traffic | Separate plan per account; adjust spend per domain |
| Best fit | Single‑site owners | Anyone managing two or more distinct domains |
Decision rule: If you manage two or more domains, create one SeaText account per domain.
<head> of the target website’s HTML. Save and publish.Do not reuse the same snippet on another domain. The script will only record traffic for the URL it is tied to, and using it on a different site will corrupt data (Source S1).
SeaText’s snippet is a small <script> tag. It loads the AI agents only after the page loads, so it does not slow down the user experience. Follow these steps for each account:
theme.liquid or header.html).</head> tag.data-seatext-id attribute matching the account ID.After installation, SeaText remains inert until you activate agents from the dashboard.
Each account has its own agent list. You can turn on any of the 20+ agents independently:
Because agents are activated per account, you can run the SEO Agent on a blog site while only enabling the Bot Protection Agent on a high‑traffic e‑commerce store.
Each account is billed separately. Choose a plan that matches the traffic volume of that domain. SeaText’s dashboard shows conversion rate, traffic growth, and ad‑spend recovery per account, so you can compare performance without manual filtering.
Analytics are stored only for the primary URL of the account. Development URLs such as localhost are blocked for security reasons, and dynamic development domains may not work reliably (Source S1). Use a real, publicly reachable domain for testing, then create a separate account for the production site.
The account‑per‑domain model works best when each domain serves a distinct audience. Subdomains (e.g., blog.example.com) are considered part of the same primary URL and share the same account. If you need separate data for subdomains, contact SeaText support for guidance.
SeaText does not currently offer bulk account creation or a multi‑domain dashboard. Managing dozens of domains means handling multiple logins and separate invoices.
Attempting to install the same snippet on two domains will cause mixed data and broken agent behavior. Always use the unique snippet from the account that matches the domain (Source S1).
Subdomains are covered by the primary URL of the account. If you need isolated data for a subdomain, you must create a separate account and use a distinct domain.
No. Development URLs are restricted for security reasons. Use a real domain for testing and create a separate account for the production site (Source S1).
The snippet will only report data for the domain it is linked to, causing mixed analytics and unreliable agent activation. Install the unique snippet from each account.
SeaText does not provide an automated transfer tool. You must manually configure agents and SEO settings in each new account.
Billing is per account. Since each domain needs its own account, you pay per domain.
No. SEO settings are stored per account, so each domain can have its own keyword targets, local SEO configuration, and content strategy.
Now that you understand why a separate SeaText account per domain is essential, you can start creating accounts for each of your sites.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, you can run SeaText AI on both your main domain and a separate blog domain, but each domain requires its own SeaText AI account linked to a single primary URL. Set up a second account for the blog and install the script there.
| Criteria | Main Domain Only | Main Domain + Blog Domain | Takeaway |
|---|---|---|---|
| Account Setup | One account with one primary URL | Two separate accounts, each with its own primary URL | Create a new account for every domain you want to run SeaText AI on. |
| Billing | One billing cycle for one domain | Separate billing for each domain account | Budget for two paid plans if both domains are on paid tiers. |
| Script Installation | One JavaScript snippet on one site | Two independent snippets, each installed on its own site | Follow the same integration steps for each domain separately. |
| Domain Restrictions | Must be a real, publicly reachable domain | Both domains must be publicly reachable; localhost and temporary URLs are blocked | Use live URLs for all domains before setting up SeaText AI. |
SeaText AI ties its AI agents, analytics, and traffic attribution directly to the primary URL of each account. This design ensures that every visitor interaction is correctly matched to the right domain. When you keep each domain in its own account, the data stays clean and the security controls work as intended.
If you try to mix multiple domains inside a single account, the system cannot reliably tell which traffic belongs to which site. This causes data conflicts, breaks attribution reports, and may prevent the SeaText script from running at all. Keeping accounts separate protects the accuracy of your conversion data and the performance of your AI agents.
The platform enforces a single-primary-URL restriction on every account. This means each account can only be linked to one main domain. This rule is not a workaround but a core part of how SeaText AI validates traffic, manages security, and delivers results. Understanding this early saves you from setup failures later.
To run SeaText AI on a separate blog domain, you must sign up for a new account using the blog's URL as the primary domain. Each account is independent, so you will manage it through its own dashboard. Think of each account as a standalone workspace for that specific domain.
Once the account is created, copy the JavaScript snippet from the blog domain's account dashboard. Then paste that snippet into the <head> section of your blog's theme. On Shopify, this means editing the theme.liquid file inside the Layout folder. On other platforms, open the header file and insert the code in the same place.
After saving the changes, verify that the data- attribute appears in the page source. You can check this using your browser's developer tools. Once verified, activate the AI agents you need, such as translation, CRO, or chat. The same integration steps apply to every domain, so the process is repeatable and straightforward.
Each SeaText AI account operates as an independent unit. It holds its own configuration, agent settings, analytics data, and billing relationship. The architecture is deliberately separated so that no domain can interfere with another. This isolation also improves security because each account validates traffic only for its own primary URL.
The single-primary-URL restriction is the backbone of this architecture. When you create an account, SeaText AI binds it to one specific domain. All traffic, bot detection, and agent actions are scoped to that domain. If you add a second domain, the system has no way to associate it with the first account, so a new account is required.
Development URLs such as localhost are blocked for security reasons. SeaText AI cannot reliably associate traffic from temporary or local addresses with your account. Dynamic development domains may also fail because the system needs a stable, publicly reachable URL to function correctly. Always use a live, fully qualified domain before setting up SeaText AI.
Running separate accounts for each domain gives you clean data isolation and accurate analytics. Every domain gets its own reports, its own agent behavior, and its own billing. The downside is that you manage multiple dashboards and pay for each domain individually. There is no built-in way to merge accounts or share configurations across them.
A hypothetical single-account management approach would simplify billing and let you toggle agents across domains from one place. However, SeaText AI does not currently offer this. The platform's architecture treats each domain as a separate site by design. Until the company adds cross-domain management features, separate accounts remain the only supported method.
The trade-off comes down to control versus convenience. Separate accounts give you precise control over each domain's setup, but they require more administrative effort. If you run two or three domains, the extra work is manageable. If you run many domains, you may want to request multi-account management features from the SeaText AI team.
One common setup is an ecommerce store paired with a content blog. The store handles transactions and the blog drives organic traffic. Running SeaText AI on both lets you translate product pages and blog posts, optimize conversions on the store, and analyze reading behavior on the blog. Each domain gets agents tuned to its specific goals.
International subdomains are another strong use case. A brand might run shop.example.com and blog.example.com as separate primary URLs. Even though they share the same root domain, SeaText AI treats each subdomain as a distinct primary URL. You need a separate account for each subdomain to ensure proper traffic attribution and agent activation.
Staging versus production environments also benefit from this structure. You might run SeaText AI on a production domain while using a staging domain for testing changes. Because development URLs are blocked, you would set up the production account first and use it as the reference. The staging domain would need its own account only if it is a real, publicly reachable URL.
SeaText AI does not currently offer a shared-settings panel across multiple accounts. Each account stores its own configuration independently. If you want the same agents active on both domains, you must manually replicate the selections in each account. This includes choosing translation languages, CRO settings, and chat configurations.
Cross-domain tracking is not built into the platform. Because each account is tied to a single primary URL, analytics data stays within that account. If you need unified reporting across domains, you would need to export data from each account and combine it externally using your own analytics tools.
Billing consolidation is also not supported at this time. Each domain account follows its own pricing plan and generates its own invoice. If you are on a paid plan, you will receive separate bills for each domain. Some teams request consolidated billing from SeaText AI, but as of now, each account is billed independently.
The most common mistake is trying to reuse the same SeaText AI account for multiple domains. This triggers the single-primary-URL restriction and prevents the script from running on the second site. If the script fails to load, check that you are using a separate account for each domain. Create a new account and install the snippet again on the affected site.
Another frequent issue is using a development or temporary URL. SeaText AI blocks localhost addresses and may not work with dynamic development domains. If your script does not activate, confirm that the domain is fully qualified and publicly reachable. Switch to a live URL before proceeding with the setup.
Sometimes the script appears to load but agents do not activate. This usually happens when the data- attribute is missing from the page source. Double-check that you pasted the snippet into the <head> section and saved the theme file. Use your browser's developer tools to inspect the HTML and confirm the attribute is present. If the issue persists, review the account dashboard for any activation errors.
SeaText AI requires one account per domain. You cannot share an account across multiple sites. This rule applies to subdomains as well; each subdomain counts as a separate primary URL and needs its own account. There is no technical limit to how many domains you can run, but each one requires its own account and billing.
Only fully qualified, publicly accessible domains are accepted. Development URLs such as localhost are restricted for security reasons. Temporary or dynamic URLs may not function properly because SeaText AI needs a stable domain to associate traffic with your account. Always verify that your domain is live before starting the setup.
Each domain on a paid plan follows its own billing cycle. There is no shared or consolidated billing across accounts. If you upgrade or change plans on one domain, it does not affect the plans on other domains. Keep this in mind when budgeting for multiple domains.
shop.example.com and your blog is at blog.example.com, you still need a new account for the blog subdomain.<head> of the blog theme, and verify the data- attribute in the page source.For deeper guides on integration and agent configuration, visit the relevant page on the client website.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: When you use SeaText on more than one domain, the first fix is to check that each domain has its own account. SeaText links each account to one primary URL, so a shared account will break traffic association. Verify the primary URL, install the correct integration code in the site-wide layout file, and use a real public domain. For Shopify, place the code in theme.liquid. If the problem continues, review the official SeaText documentation.
When you use SeaText on more than one domain, the symptoms are usually clear. The AI may not appear on one site. Changes made in one account may seem to affect another domain. Visitor traffic or conversion data may show up in the wrong place. You may see an invalid URL error.
These symptoms are signals of a configuration problem. SeaText links each account to one primary URL. If the account and the domain do not match, SeaText cannot associate traffic with the right account.
Why this matters: a mismatch makes your data unreliable. You cannot tell which domain produced the result. You might optimize the wrong page or miss a conversion problem. The fix starts with a simple diagnostic order.
Follow this sequence in order. Do not skip directly to reinstalling code. The account-to-domain mapping is the most likely cause and the easiest to verify.
Why this order works. The first steps cost a few seconds and remove the most common causes. Reinstalling code is important, but it will not help if the account is wrong. A logical sequence saves time and prevents repeated installations.
The official SeaText integration instructions say that each account is linked to a single primary URL. If you need SeaText on multiple domains, you must create separate accounts for each domain.
When one account sends traffic from two sites, SeaText cannot reliably decide which domain the visitor came from. Data becomes mixed, and optimization stops working correctly.
Fix: create a new account for the second domain. Use the account dashboard to generate its own integration code.
The code snippet is the bridge between the page and the account. If it is missing, the AI will not activate.
Fix: copy the code from the correct account and place it in the site-wide layout file. For Shopify, paste it into theme.liquid. Save the file and test again.
Development URLs are restricted for security reasons. Localhost is a common example. Dynamic development domains may also fail because SeaText cannot reliably associate their traffic.
Fix: use a valid, real domain. If you need a staging environment, choose a stable public domain and give it its own account.
Every SeaText account is linked to one primary URL. If the URL in the account is different from the domain where the code sits, the connection is broken.
Fix: update the primary URL to the exact domain you are using. Then reinstall the integration code from that account.
Shopify is a common setup. The source integration page gives clear steps. Here is the full process.
Before you can install, you need a SeaText AI account. You can create one on the SeaText website. The installation process is secure. The AI remains inert until it is activated.
Why theme.liquid? This layout file loads on every page of the Shopify store. Placing the code there means the integration is site-wide instead of limited to one page.
If you manage multiple Shopify stores, repeat these steps for each store. Do not use the same code from one account on another store. Each account has its own code because each account is linked to its own domain.
The arrangement that works depends on your situation. The table below shows practical patterns.
| Situation | Recommended Setup |
|---|---|
| One production website | One SeaText account with that domain as the primary URL. |
| Two or more websites | Create one account per website. |
| Staging or pre-launch testing | Use a separate account and a stable real domain. |
| Localhost or temporary preview | Not supported for security reasons. Use a real domain instead. |
Decision criteria are simple. If the URL is a separate website, it needs a separate account. If the URL is a development domain, it may not work at all. If the URL is real and public, use it as the account's primary URL.
Consider a team with two stores on different domains. If they use one account, the AI cannot know which visitors belong to which store. Traffic from both sites will enter the same report. The fix is two accounts and two code snippets. Each snippet is installed only on its own domain.
The same logic applies when you need a production domain and a development domain. Create two accounts. Do not install one code on both. The development account will still need a real domain because localhost is restricted.
SeaText's model is simple but strict. These are the main limits to remember:
These limits protect data quality. They also mean you should plan your domain architecture before installing the code.
If you have followed every step and the issue remains, check the official documentation. The integration page points to https://seatext.com/documentation-ai-scope for additional details. You can also use the SeaText website to find the latest support options.
One final check: confirm that the AI is actually activated for the account. The code is inert until activated. A code that is present but not activated will not change your site.
Each account is linked to a single primary URL. Separate accounts let SeaText associate traffic with the correct domain. This keeps conversion data clean.
No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
No. The code comes from an account, and that account is tied to one primary URL. Create one account for each website.
Dynamic development domains may not function. SeaText cannot reliably associate traffic with an address that changes. Use a stable, real domain.
Log in to SeaText and open the integration page. Copy the JavaScript code shown there for that account.
The AI remains inert until it is activated. The installation is secure, but the system must be turned on for the account.
Official sources for this troubleshooting guide:
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Each domain requires its own SeaText AI account. The cost is the price of one account per domain, with no multi-domain plan, so the total scales linearly with the number of domains you manage.
SeaText AI ties every account to a single primary URL. If you want to run the platform on more than one domain, you must create a separate account for each one. The total cost equals the per-account price multiplied by the number of domains. There is no bundled subscription that covers multiple domains.
This per-account model is a deliberate architectural choice. It keeps each domain isolated for security, tracking, and agent configuration. The trade-off is linear cost growth. If you operate three websites, you need three accounts. A development or staging domain counts as a separate domain and requires its own account.
| Criterion | Separate accounts (only option) | Single account (not supported) |
|---|---|---|
| Cost structure | Linear – pay per domain | Would be cheaper, not available |
| Security isolation | Full – breach on one domain does not affect others | Not applicable |
| Analytics granularity | Per-domain performance data and agent reports | Not applicable |
| Management effort | Log in to each account separately | Would be simpler, not supported |
| Agent configuration | Independent per domain | Not applicable |
| Best fit | Agencies, multi-brand businesses, dev/staging/prod setups | Not an option |
Each SeaText AI account links to one primary URL. That URL is the website where you install the JavaScript snippet. The AI agents on that account only operate on that domain. To use the same agents on a second domain, you must create a second account and install the snippet there.
The source pack states: “Each SEATEXT AI account is linked to a single primary URL. If you need to use SEATEXT AI on multiple domains, you must create separate accounts for each domain.” This rule cannot be bypassed. It is a core part of the architecture.
Development URLs such as localhost are restricted for security reasons. Dynamic development domains may not function properly because SeaText AI cannot reliably associate traffic with your account. You must use a valid, real domain for each account.
The primary cost driver is the number of domains you need to manage. There is no discount for adding more domains to an existing account. Cost grows linearly: N domains = N account fees. A main site, a staging site, and a second brand site require three accounts.
Because pricing is per account, you cannot reduce cost by grouping domains under one subscription. The only way to lower per-domain cost is to choose a lower-priced account tier if one exists. Check the current pricing page for available plans and their per-account rates. The homepage and several landing pages link to a pricing page and mention a free one-month pilot trial, but specific plan prices are not published in the source pack.
Agencies managing client sites need one account per client domain. Each client’s data, agents, and analytics stay isolated. This simplifies compliance and reporting.
Businesses running multiple brands (e.g., brandA.com, brandB.com) need separate accounts. Each brand gets its own agent configurations, translation settings, and CRO experiments.
Development, staging, and production environments each count as a separate domain. You need an account for dev.example.com, staging.example.com, and www.example.com. This ensures test traffic does not pollute production analytics.
International sites on separate country-code domains (example.de, example.fr, example.jp) each require an account. The Translation Agent can run on each, but configuration and reporting remain separate.
Count every distinct registered domain you plan to use. Include development, staging, and any microsites.
Estimate the per-account price from the current pricing page. Multiply by the domain count. This is your baseline monthly cost.
Factor in management overhead. Each account requires separate login, agent activation, and snippet installation. Agencies may need team access controls per account.
Evaluate security needs. The per-account model provides natural isolation. A compromise on one domain does not expose data from others.
Consider analytics requirements. Separate accounts give clean, per-domain conversion reports, reading telemetry, and agent performance data.
Check for volume discounts. The source pack does not mention any. Contact SeaText sales if you manage many domains.
| Fact | Source |
|---|---|
| Each account is linked to a single primary URL. | S1 |
| To use on multiple domains, you must create separate accounts. | S1 |
| Development URLs (like localhost) are restricted for security. | S1 |
| Dynamic development domains may not work properly. | S1 |
| Installation is secure and the AI remains inert until activated. | S1 |
| A free one-month pilot trial is advertised on the Google Ads landing page. | S6 |
| Pricing details are linked from the homepage and feature pages but not listed in the source pack. | S2, S6, S7 |
The per-account rule applies to every SeaText AI agent, including the Google Ads Agent, Translation Agent, CRO Optimizer, Bot Protection Agent, and all others listed on the homepage and blog pages. It does not change based on the plan or feature set you choose.
Subdomains (e.g., blog.example.com and shop.example.com) may be treated as part of the same primary domain if they share the root domain. The source pack does not clarify this. Check with SeaText support before assuming subdomains are covered.
Wildcard domains or multi-domain SSL certificates do not change the account requirement. Each distinct primary URL needs its own account.
This advice applies to anyone managing multiple websites: different brands, separate markets, development and production environments, or client sites. If you plan to use SeaText AI on more than one domain, budget for one account per domain.
No. Each account is linked to a single primary URL. You must create a new account for each additional domain.
The source pack does not mention any volume discount. Check the pricing page or contact SeaText for current offers.
Subdomains under the same root domain may or may not require separate accounts. The source pack does not specify. Verify with SeaText support before setting up.
Create a new SeaText AI account for that domain, then install the JavaScript snippet on the new website. Follow the same steps as for the first domain.
The source pack does not mention wildcard support. It is likely not supported. Use separate accounts.
The snippet is tied to one account and one primary URL. Using it on another domain may cause tracking issues or errors. Always create a new account for each domain.
The Google Ads landing page advertises a free one-month pilot trial. It is not clear if the trial applies per account or per organization. Check with the vendor.
The source pack does not describe a multi-account dashboard. You likely log in to each account separately. Check with the vendor for agency or enterprise management features.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText links each AI account to a single primary URL, so you need a separate account for every domain you want to run it on. Using one account for multiple domains is not supported and causes tracking errors and security issues. Separate accounts are required unless you only have one domain.
Verdict: Use separate SeaText accounts for each domain. SeaText ties an account to one primary URL, so a single account cannot reliably serve multiple sites.
| Criteria | One Account (Multiple Domains) | Separate Accounts (One Per Domain) |
|---|---|---|
| Domain support | Not supported – SeaText requires a single primary URL per account. | Fully supported – each account is linked to its own domain. |
| Management overhead | Lower in theory, but invalid when using multiple domains. | Higher – you manage separate logins and billing for each account. |
| Cost | One subscription, but not allowed for multiple domains. | One subscription per domain, but fully compliant. |
| Data isolation | Risk of cross-domain data mixing; validation errors occur. | Each domain's traffic and AI actions stay fully isolated. |
| Setup complexity | Simple in theory, but SeaText rejects mismatched URLs. | Straightforward – follow the same steps for each site. |
SeaText AI accounts are bound to a single primary URL. This binding is fundamental to how the platform operates. When you create an account, you specify the primary domain where SeaText will run. The platform uses that primary URL to associate traffic, AI-generated copy, and analytics with the correct site.
If you try to use the same account on a different domain, SeaText detects the mismatch. According to the official integration documentation, each SeaText account links to one primary URL. The system validates that the JavaScript snippet on your page matches the registered domain. If the domains do not match, SeaText blocks the request or records data incorrectly.
You cannot share a single billing profile across unrelated domains without creating separate accounts. The one-domain-per-account rule is enforced at the platform level. This means you must create distinct accounts even for related sites, such as separate country-code domains or subdomains for different brands.
The one-domain-per-account model affects three key areas of your marketing operations:
For agencies managing multiple client websites, this model means each client gets their own isolated environment. Client A's traffic data never mixes with Client B's data. Each client's AI agents respond only to visitors on their own domain.
When you install SeaText, you paste a unique JavaScript snippet into your website's code. This snippet contains an account token that identifies your SeaText account. The installation process follows these steps:
SeaText validates the token against the primary URL stored in your account. If the snippet is placed on a domain that does not match the registered primary URL, the validation fails. The platform then either blocks the request entirely or logs the data under an error state. In both cases, the AI features remain inactive for that mismatched domain.
This validation happens server-side. You cannot override it by editing the JavaScript snippet or changing settings in your account dashboard. The only way to use SeaText on a new domain is to create a new account registered to that specific domain.
When you need SeaText on multiple websites, follow this workflow for each domain:
Go to the SeaText signup page for each domain you want to cover. During each signup, enter the specific domain as your primary URL. For example:
Each account requires its own email address and login credentials. You cannot reuse the same email for multiple accounts on the same domain.
For each website, copy the unique JavaScript snippet from the corresponding SeaText account. Install it in your website's code using the standard integration method:
After saving, preview a page on each domain to confirm the snippet loads. Check your browser's developer tools to ensure the data-seatext attribute appears in the HTML source. If the snippet does not load, check for JavaScript errors or domain mismatch warnings in your SeaText dashboard.
Once installed, activate the AI agents you need for each domain independently. Account 1 might run the CRO Optimizer and Translation Agent. Account 2 might run Bot Protection and Google Ads Agent. Each account's agent settings are independent.
Here is how a realistic multi-domain setup might look:
Note that dynamic development domains may not function properly. SeaText documentation states that the platform might be unable to reliably associate traffic with your account if you use non-standard development URLs. For reliable testing, use a subdomain pointed to a staging server with a real domain name.
Using separate accounts has direct cost implications:
The trade-off is between higher total cost and full compliance. Attempting to save money by using one account across multiple domains will result in validation errors and inactive AI features. The money saved is not worth the loss of functionality.
Use this framework to decide how to organize your SeaText accounts:
If you encounter validation errors after installing SeaText, here is how to diagnose and fix them:
SeaText does not support a single account covering multiple primary URLs. Attempting to use one account across domains will result in validation errors and inactive AI features. You also cannot share a single billing profile across domains without creating separate accounts.
Dynamic development URLs and localhost are restricted for security. SeaText requires a valid, publicly accessible domain to associate traffic correctly. If you need to test SeaText before launch, use a staging subdomain with a real domain rather than a local development environment.
There is no built-in way to transfer data between accounts. Historical data stays with the original account and domain. If you later decide to consolidate, you would need to export data manually from each account.
Direct Answer: SeaText AI lets you schedule and run content updates automatically across multiple websites. Each domain needs its own SeaText AI account, and each account is tied to one primary URL. You can push the same scheduled change to every site, customize timing per account, and use the API for faster coordination.
Yes. SeaText AI lets you set up scheduled content updates and run them on several domains at the same time. The platform's AI agents rewrite pages automatically, so you can push the same change to every site without manual copy-pasting.
| Criteria | Single-Domain Setup | Multi-Domain Setup | Takeaway |
|---|---|---|---|
| Account requirement | One SeaText AI account per site | Separate SeaText AI account for each domain (required) | Plan account creation before rollout |
| Automation | Schedule updates within the single account | Schedule updates in each account; run them concurrently | Automation works the same, but you must repeat the schedule per account |
| Control | Full control over one site's content | Independent control per domain; customize schedules per site | Match each account's permissions to your team's workflow |
| Limitation | None specific | Requires separate accounts; no single-pane view for all domains | Use the API or a coordination script to keep schedules in sync |
SeaText AI's agents watch visitor behavior and rewrite page copy in real time. When you set a schedule, the AI applies the same rule at the chosen time. For example, you can replace a product description, add a new promotion, or update a banner across all sites.
Automation is not the same as simple find-and-replace. The AI reads the page, understands the context, and rewrites the relevant copy. It can generate variants for headlines, offers, product blocks, and calls to action. The platform also runs A/B-style testing to scale the wording that performs best.
This matters for multi-domain teams because the same marketing message often needs to appear in several places at once. Instead of logging into each content management system and editing files by hand, you define the job once per SeaText account and let the agents execute it.
Each SeaText AI account is linked to one primary URL. That URL is the domain where the script collects data and activates agents. To automate updates across multiple domains, you create an account for every site you manage.
Inside each account, you use the Automation section to define a content change. You choose the element to rewrite, such as a headline, product name, description, or CTA. You also set the date and time for the job to run.
When the scheduled time arrives, the AI agents in every account execute the change. The execution is near-simultaneous because each account runs its own job independently. If you start the jobs at the same time, visitors on all domains see the update at roughly the same moment.
The script remains inert until you activate it. That means installing the code does not change anything by itself. Activation happens when you create a job and turn on the agent in the dashboard.
Manual updates require someone to open each site, edit the content, publish the change, and verify it. That process is slow and error-prone. With three domains, you might spend an hour. With ten domains, you can lose most of a day.
Automated workflows remove the repetitive part. You prepare the job once, schedule it, and let the agents handle execution. The main cost is setup time, not ongoing effort.
Automation also reduces drift. When a human edits five sites by hand, one site often gets a slightly different version. A scheduled SeaText job applies the same rule consistently, so the wording stays aligned.
There are still risks. You must create an account for every domain, or the update will not run there. You also need to keep schedules identical across accounts. If you change the time in one account but not the others, the rollout becomes unsynchronized.
Consider a team managing five regional stores. A manual banner update might take 20 minutes per site, or 100 minutes total. With SeaText, the same job runs across all accounts in seconds, after the initial setup.
The savings grow as you add more domains. Translation updates are another example. SeaText can work in 125 languages, and each domain can have its own language version. A coordinated schedule lets you publish a new offer in every market without waiting for a translator to paste text.
The biggest risk is missing an account. If you add a new domain but forget to create a SeaText account, the automation skips that site. Before every rollout, check your domain list against your account list.
Another risk is schedule drift. If you update the job in one dashboard but not the others, some sites go live late. Use a spreadsheet or a management script to track the scheduled jobs. You can also trigger jobs through the SeaText API for a single command.
Seasonal promotion: A holiday discount banner needs to appear on five regional stores at midnight. Create the same scheduled banner job in each account and launch them together.
Regulatory notice: New privacy language must be added to every site within 24 hours. Use the automation feature to push the text change across all domains at once.
Multi-time-zone rollout: You manage stores in New York, London, and Tokyo. Schedule each account to activate at midnight local time instead of forcing one global time.
Content rollback: Suppose a campaign underperforms. You can disable the scheduled job in any account before it runs. If the update is already live, you can create a rollback job that restores the previous wording.
Domain-specific customizations: You can let one regional site keep its local pricing while the others use the default offer. Each account controls its own content rules, so you are not forced into a single global version.
SeaText requires a distinct account for every primary URL. Development or localhost URLs are blocked for security, so you cannot use a single account for a staging and a production site.
This rule protects website integrity. The AI remains inert until activated, which means an unactivated script cannot alter content. You control when each agent starts working.
For compliance, keep a record of which accounts hold which domains. If a domain changes, you must create a new account for the new primary URL and set up the schedules again. You should also review the content changes before publishing, especially for regulated industries.
SeaText agents rewrite pages in real time for paid visits and scheduled jobs. The platform tracks results by page, keyword, and version, so you can see whether a rewrite lifted conversions.
Real-time rewrites do not create new pages. The script changes the copy a visitor sees on the existing page. That keeps the URL structure stable and avoids duplicate-content problems.
Performance depends on the agents you activate. Google Ads matching, translation, and CRO testing can run together. SeaText reports conversion metrics such as +35% conversion lift for ad landing page matching, but your results depend on traffic, offer, and setup.
If you run many domains, monitor each account's dashboard. A heavy rewrite schedule may increase server load during the activation window. Stagger non-urgent updates to avoid a spike across all sites.
Each SeaText AI account is linked to a single primary URL. There is no built-in dashboard that manages every domain from one place. You must sign in to each account or use the API to coordinate.
Dynamic development domains may not function properly because SeaText might be unable to reliably associate traffic with your account. Stick to valid, real domains for production scheduling.
The platform does not impose a hard limit on how many domains you can manage, but licensing costs scale with accounts. Before you expand, confirm your plan supports the number of primary URLs you need.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI requires product descriptions to be wrapped in a specific HTML data‑attribute tag (e.g., <div data‑seatext="product-description">…</div>) so its autonomous agents can rewrite, translate, and test copy in real time. This guide covers the exact format, step‑by‑step Shopify implementation, how the wrapper interacts with SeaText’s AI agents, trade‑offs versus other integration methods, troubleshooting, and limitations for non‑Shopify or development environments.
Wrapping is placing your product description inside a special HTML element that carries a SeaText data‑attribute. The AI agents scan the DOM for that attribute to identify which text they may rewrite, translate, or A/B test. Without the wrapper, the agents treat the description as ordinary content and leave it unchanged.
SeaText’s parser looks for a precise attribute string: data-seatext="product-description". Any deviation—missing quotes, extra spaces, wrong attribute name, or a self‑closing tag—causes the parser to skip the element. For example, <div data-seatext=product-description> (no quotes) or <span data-seatext="product-desc"> (typo) will both fail. A valid block‑level wrapper looks like:
<div data-seatext="product-description">
Your product description goes here.
</div>To test, open a product page, right‑click the description, choose Inspect, and verify the attribute appears exactly as shown. If it is absent, the wrapper was not saved correctly or the theme caches an older version.
Use a block‑level element—commonly <div> or <section>—with the attribute data-seatext="product-description". Inline elements such as <span> work but may break layout if the description contains block‑level children. The wrapper must enclose the full description text, including any HTML markup you want the AI to consider.
product.liquid (older themes) or a file inside the sections folder such as main-product.liquid or product-template.liquid (Online Store 2.0 themes).{{ product.description }} or {{ product.description | escape }}. This is the raw description output you will wrap.escape filter, remove it so the AI receives clean HTML. Replace {{ product.description | escape }} with {{ product.description }} inside the wrapper.<div data-seatext="product-description">
{{ product.description }}
</div>theme.liquid (inside the <head> tag) verify the SeaText integration script is present. The snippet is provided in your SeaText dashboard and must be pasted before the closing </head> tag. Without it, the wrapper exists but no agent runs.data-seatext attribute wraps the description.Once the wrapper and the JavaScript snippet are present, SeaText deploys up to 20 autonomous agents. The Ecommerce Product Copy Agent reads the wrapped description, generates variants, and serves the highest‑converting version to each visitor. The Website Translation Agent detects the visitor’s language and replaces the wrapped text with a translation in one of 125 languages. The AI A/B Testing Agent runs continuous multi‑armed bandit tests on the wrapped copy, allocating traffic to winning variants without manual 50/50 splits. The Visitor Source Rewrite Agent adapts the description to match the keyword or referral source that brought the visitor. All these actions happen in real time because the wrapper gives each agent a reliable DOM anchor.
SeaText also offers a JSON API and a Shopify app block. The wrapper method is the fastest to implement—no app install, no API keys, no server‑side code. However, it relies on client‑side JavaScript, so search crawlers that do not execute JS will see the original description. The JSON API gives you server‑side control and works with headless storefronts but requires backend development. The app block provides a no‑code UI in the theme editor but is limited to Online Store 2.0 themes. Choose the wrapper when you need a quick, zero‑dependency integration on a standard Shopify theme; choose the API for headless or custom platforms; choose the app block if you prefer visual editing and use a compatible theme.
{% render 'product-description' %}.seatext.js). Ensure your domain is a valid, publicly reachable URL—localhost and password‑protected dev stores are blocked.data-seatext attributes on the same page. Only the first match per agent is used.product.liquid and product-bundle.liquid), repeat the wrapper insertion in each template file.window.seatext && window.seatext.refresh() after the injection.[product_desc data-seatext="product-description"]) does not work—the parser only scans real DOM attributes.data-seatext element confuses the parser. Keep one wrapper per description.localhost, 127.0.0.1, and dynamic preview URLs (e.g., *.myshopify.com preview links). Use a real custom domain or a stable staging domain with a valid SSL certificate.example.com and shop.example.com.<head>, not at the bottom of <body>.| Fact | Detail |
|---|---|
| Supported attribute | data-seatext="product-description" |
| File to edit (Shopify) | Usually product.liquid or a template inside the sections folder |
| Script placement | theme.liquid inside <head> |
| Verification method | Inspect HTML source for the data‑attribute after saving |
| Effect | SeaText AI can rewrite, translate, and test the description in real time |
| Domain requirement | Valid, publicly reachable domain; localhost and dev URLs ignored |
| Multi‑domain policy | One SeaText account per primary domain |
data- and stores custom data for scripts.data-seatext wrapper.theme.liquid.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, SeaText AI supports HTML tags in product descriptions, but they should be used sparingly to avoid confusion. Follow the steps below to add tags correctly and verify they work.
SeaText AI can read HTML tags that you add around product descriptions. This lets the AI target specific text for translation, optimization, or dynamic rewriting. Use tags only where they add clear structure; excess markup can confuse the model.
Wrapping means placing an HTML element—such as a <div> or <span>—around the description text. The element can carry a custom data- attribute that SeaText looks for when it scans the page.
SeaText AI processes the page in real time. It needs a reliable anchor point to know which text to modify. A well‑placed wrapper tells the script exactly where to read and write.
If the wrapper is ambiguous, the AI may pick up surrounding navigation links or footers. That leads to unwanted changes and can break the user experience.
Using a dedicated wrapper also isolates AI work from other scripts. This reduces the chance of conflicts with third‑party widgets.
When the page loads, SeaText’s JavaScript runs a DOM query similar to document.querySelectorAll('[data-seatext]'). It collects every element that contains the configured attribute.
For each element, the script extracts element.innerText. The text is sent to the AI model over a secure endpoint. The model returns the transformed text, which the script then writes back to element.innerHTML.
The scan happens once per page load. If the page updates via AJAX, SeaText can re‑run the scan if you call its Seatext.refresh() method.
Any HTML element works, as long as it carries a data- attribute that SeaText is configured to read.
<div class="product-description" data-seatext="true">…</div><span data-seatext="true">…</span><p data-custom="seatext">…</p> (if you set the custom attribute name in the dashboard)<section data-seatext="true" data-lang="en">…</section>Do not use attributes that start with data- but are unrelated to SeaText, as they will be ignored.
div tagsSemantic tags (<article>, <section>, <aside>) convey meaning to browsers and assistive technologies. They also help SEO tools understand page structure.
SeaText does not require semantic tags, but using them can improve overall accessibility. If you choose generic div tags, ensure you add clear class names and ARIA labels where needed.
Trade‑off: semantic tags may add a few extra characters, but they provide long‑term benefits for maintainability and compliance.
SeaText processes only the outermost element that matches the attribute. If you nest two wrapped elements, the inner one is ignored.
Example of a bad pattern:
<div data-seatext="true">
<span data-seatext="true">{{ product.description }}</span>
</div>
The AI will act on the div and skip the span. This can cause unexpected results if you expected both to be processed.
Keep nesting shallow. Use one wrapper per description block.
Some stores load product descriptions via AJAX after the initial page load. In that case, the wrapper must exist in the DOM before the content is injected.
Place the wrapper in the static template, then let JavaScript fill its inner HTML. SeaText will detect the wrapper once the content appears, provided you call Seatext.refresh() after the AJAX call.
Testing dynamic content:
Seatext.refresh() in the console and observe any AI changes.product.liquid or a file inside the sections folder.{{ product.description }} or similar.section:
<section class="product-description" data-seatext="true">{{ product.description }}</section>
data-seatext attribute appears in the HTML source.Seatext.refresh().SeaText can handle most standard tags, but there are limits:
<script> or <style> blocks—those are ignored.localhost) are blocked for security reasons, so testing on a real domain is required.data-seatext attribute is processed per page. If you need multiple blocks, configure additional custom attribute names in the SeaText dashboard.data- attribute is present.Seatext.refresh() in the console and verify the AI response.| Fact | Detail |
|---|---|
| Supported tag | Any HTML element with a custom data- attribute (e.g., data-seatext="true") |
| Typical location | Inside product.liquid or the product‑template file |
| Verification method | Inspect the page source and look for the attribute |
| Dynamic handling | Call Seatext.refresh() after AJAX loads |
| Domain restriction | Development domains like localhost are blocked for security |
data- attributes.data‑ attribute. Classes help CSS but not AI targeting.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Use clear headings, bullet points, and concise paragraphs, and embed SeaText’s data‑attribute tag in the product template. Follow the step‑by‑step process to add the tag, test it, and verify that SeaText AI can generate optimized copy.
A SeaText tag is a data‑seatext attribute placed around the HTML that outputs your product description. When the page loads, SeaText AI reads this attribute and can rewrite or enhance the copy in real time.
| Fact | Detail |
|---|---|
| Tag location | Wrap the product description output code in the theme file (e.g., product.liquid) |
| Required account | One SeaText AI account per primary domain |
| Activation | AI stays inert until you activate it from the SeaText dashboard |
Find the file that renders the product description. It is usually named product.liquid or located inside a product‑template.liquid file.
Wrap the description output with the attribute. Example:
<div data‑seatext="product-description">{{ product.description }}</div>data‑seatext attribute is present.SeaText AI parses the HTML that it receives from the browser. Clear headings, bullet points, and short paragraphs give the model distinct signals about hierarchy and intent. When headings are used consistently, the AI can isolate the product name, key features, and benefits without guessing.
Bullet points turn dense prose into discrete items. Each <li> becomes a separate token cluster, which improves the AI’s ability to rank features and generate variant copy. Concise paragraphs (under 20 words) reduce the chance of the model mixing unrelated concepts.
From an SEO perspective, search engines also reward well‑structured markup. Structured headings (H2, H3) create a logical outline that both crawlers and AI agents can follow. This leads to higher relevance scores and better conversion potential.
Even a perfect structure cannot fix every scenario. The AI may misinterpret ambiguous wording, especially if the same term appears in multiple contexts on the page. Over‑optimizing with too many headings can fragment the content and dilute the main message.
Performance impact is modest but measurable. Adding the data‑seatext attribute triggers an extra network request to SeaText’s service. On slow connections this can add 100‑200 ms to page load time.
Dynamic content that is injected after the initial HTML render (e.g., via JavaScript) may not carry the attribute when SeaText scans the page. If a script removes or replaces the wrapper, the AI will not see the description. Keep the attribute on the final element that remains in the DOM after all scripts run.
eCommerce product pages: Use a heading for the product name, a short paragraph for the value proposition, and a bullet list for specs. Example:
<h2>{{ product.title }}</h2>
<p>{{ product.short_description }}</p>
<ul>
Feature 1 – benefit
Feature 2 – benefit
Feature 3 – benefit
</ul>Landing pages for paid ads: Match the headline to the ad keyword, then place a concise paragraph that mirrors the ad copy. Follow with a bullet list of three top benefits. This alignment helps SeaText rewrite the page instantly for each keyword.
Blog excerpts: Keep the excerpt under 150 characters and use a single H3 to label the topic. SeaText can then expand the excerpt into a full paragraph when needed.
Tips for writing effective bullet points:
Tips for keyword hierarchy:
Avoid overly technical language. SeaText aims to produce copy that reads naturally for shoppers, not engineers.
Placing the tag on a wrapper that is later removed by JavaScript can hide the attribute from SeaText. Keep the attribute on the final HTML element that displays the description.
SeaText AI works only on domains that have a dedicated account. Development or localhost URLs are blocked for security reasons, and each domain needs its own account.
data‑seatext attribute is present and that the AI is activated in your dashboard.data‑seatext attribute must be present on each language version of the page.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Keep product descriptions concise, highlight key features, and add SeaText’s data‑attribute tag. Avoid duplicate content and test the tag in the HTML source.
Direct Answer: Keep descriptions concise, include key features, and avoid duplicate content.
SeaText AI reads only the HTML blocks that carry its special data‑attribute. When the tag is missing or the copy is duplicated across many pages, the AI cannot differentiate product value and may apply the same generic rewrite to every item. This reduces relevance, harms SEO, and wastes the AI’s ability to boost conversion rates.
Concise, unique copy gives the AI clear signals about each product’s benefits. It also improves page load speed and readability for human visitors, which together raise engagement metrics that SeaText’s CRO agents monitor in real time.
1. Be concise. Aim for 150‑250 words per description. Shorter copy forces you to focus on the most compelling benefit, making it easier for the AI to identify the core selling point.
2. Highlight key features. Use bullet points or short sentences to list the top three to five attributes that differentiate the product. SeaText’s Ecommerce Product Copy Agent (see source S3) uses these signals to generate targeted headlines and CTAs.
3. Avoid duplicate content. Each product should have a unique description. Duplicate text dilutes SEO value and can cause the AI to treat multiple items as the same, leading to generic rewrites that miss conversion opportunities.
First, obtain the SeaText JavaScript snippet from your SeaText dashboard. The snippet activates the AI agents on every page where the data‑attribute appears (source S1). Insert the snippet into the global <head> of your site.
Next, locate the template that renders the product description. In Shopify this is usually product.liquid or a file inside the sections folder (source S1). Wrap the output with the SeaText attribute, for example:<div data-seatext="product-description">{{ product.description }}</div>
Finally, save the changes and use the browser’s Inspect tool to confirm the attribute is present. If the attribute is missing or malformed, SeaText will skip the block, and no AI rewrite will occur (source S1).
The AI can only rewrite content that contains the correct data‑attribute. Pages without the tag, or with broken HTML, are ignored. This means you must maintain clean markup across all product pages, which can add a small overhead for developers.
Another trade‑off is between uniqueness and automation. While SeaText can generate variations quickly, overly generic copy may still need human review to ensure brand voice consistency. The platform does not require separate training, but fine‑tuning with brand guidelines can improve results (source S3).
Shopify stores. Follow the step‑by‑step guide in the Shopify Integration doc (source S1) to edit theme.liquid, locate product.liquid, and add the attribute. After publishing, the Ecommerce Product Copy Agent will rewrite each description in real time.
Custom CMS or Magento. Any system that lets you edit HTML templates can host the data‑attribute. Insert the attribute around the description field and verify with developer tools. The same AI agents apply, regardless of platform.
Multilingual sites. SeaText’s Translation Agent can translate the same attribute‑marked block into up to 125 languages (source S2). By keeping the original copy concise and feature‑focused, the translated versions retain the same conversion‑focused structure.
After adding the tag, preview a product page and check the source for data-seatext="product-description". Then, enable the Ecommerce Product Copy Agent from the SeaText dashboard. Refresh the page; the AI will rewrite the copy instantly, inserting optimized headlines, benefit‑focused sentences, and stronger calls‑to‑action.
Use SeaText’s CRO Reading Analysis Agent to monitor how visitors interact with the new copy. The agent tracks dwell time, scroll deceleration, and friction points, allowing you to iterate on the description length and feature list for maximum conversion (source S4).
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Wrap each product description in a JSON‑formatted data attribute, then save and test the change. SeaText AI will read the JSON and use it for translation and copy optimization.
Use a JSON object with keys like name, description, features, and specifications. Place it inside a data-seatext attribute on a span or div that wraps the product description. Here is a compact, copy-pasteable example:
<span data-seatext='{"name":"{{ product.title }}","description":"{{ product.description | escape }}","features":"{{ product.metafields.features }}","specifications":"{{ product.metafields.specs }}"}'>{{ product.description }}</span>SeaText AI reads this JSON to translate, rewrite, or personalize the product copy in real time.
SeaText's JavaScript reads structured product data from the data-seatext attribute. This differs from plain HTML descriptions because the JSON provides explicit keys for each field. The AI knows exactly which part is the name, which is the description, and so on. This structure allows SeaText agents, like the Ecommerce Product Copy Agent or Website Translation Agent, to target specific content without guessing. Plain HTML mixes everything together, making it harder for the AI to separate and optimize each element. JSON wrapping gives you precise control over what SeaText processes.
Build a JSON object with these common keys:
| Key | Data Type | Example |
|---|---|---|
name | String | "Classic Leather Wallet" |
description | String | "Handcrafted from full-grain leather..." |
features | String | "RFID blocking, 6 card slots, coin pocket" |
specifications | String | "Dimensions: 4.5 x 3.5 inches, Weight: 90g" |
price | String | "$49.99" |
sku | String | "WAL-001" |
You can add custom keys as needed. The keys must be valid JSON strings. SeaText agents reference these keys to apply changes. For example, the Ecommerce Product Copy Agent can rewrite the description key while keeping the name unchanged. Use keys that match your product data structure.
JSON requires double quotes inside strings. In Shopify's Liquid templates, you must escape quotes to prevent breaking the HTML attribute. Use the escape filter on the product description. For example:
{{ product.description | escape }}This converts double quotes to " and other special characters to HTML entities. The SeaText JavaScript then decodes them back. If you forget to escape, a quote in the description will break the JSON and SeaText will ignore the attribute. Also escape any Liquid variables that contain quotes. This keeps the data-seatext attribute valid.
Inline data-seatext wrapping is the simplest method. But it has trade-offs. Alternative approaches include passing metafields or using theme objects. Here are comparisons:
Choose the method that fits your team's skill level. The inline approach works for most stores. If you have many products with large descriptions, consider metafields to keep the HTML lightweight.
Verification: After saving, open a product page. Right-click and select Inspect. Look for the data-seatext attribute. If the JSON is valid, SeaText will process it. If the JSON is malformed, SeaText ignores the attribute and falls back to the raw HTML description. This is the recommended fallback behavior.
Limitations: The JSON wrapper works only on pages where the SeaText JavaScript snippet is loaded. It also requires a domain that matches your SeaText account. Development domains like localhost are blocked for security reasons. If you need to use SeaText on multiple domains, create separate accounts for each domain. Each account is linked to a single primary URL. Dynamic development domains may not work reliably.
Size limit: Keep the JSON under 5 KB to avoid performance issues. Large JSON objects can slow page rendering. Test your largest product description to ensure it stays within limits.
Common mistakes: Unescaped quotes break the JSON. Missing commas or extra commas cause errors. Always validate the JSON using a tool like JSONLint before saving.
data-seatext attribute is invisible to visitors. The visible content remains the same. SeaText reads the JSON but does not alter the HTML unless you activate an agent.escape filter in Liquid. It converts newlines to
and quotes to entities. This keeps the JSON on one line. If you need to preserve line breaks in the output, use strip_newlines or encode them as
in the JSON string.price, color, material. Just make sure your SeaText agents are configured to read those keys.data-seatext attribute is ignored. SeaText agents will not run. This is safe and does not break the site.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Install the SeaText AI app from the Shopify App Store, add the JavaScript snippet to your theme, wrap product descriptions with the data‑attribute, and verify the integration. Then explore the full SeaText AI Shopify integration to activate agents that optimize descriptions for conversions.
SeaText AI adds a lightweight data‑attribute to each product description so its autonomous agents can rewrite, translate, and personalize copy in real time. This guide walks you through every step, explains why the integration matters, shows how the wrapper works under the hood, and highlights trade‑offs you should consider before you go live.
SeaText AI deploys up to 20 specialized agents that optimize conversion rates, recover ad spend lost to bots, translate content into 125 languages, and personalize pages for each visitor source (S2). By wrapping product descriptions you enable the Ecommerce Product Copy Agent to test and scale high‑performing copy automatically (S6). The integration also unlocks the Google Ads Optimization Agent, which rewrites landing‑page copy to match the exact keyword a shopper clicked (S4). Together these agents turn a static catalog into a dynamic, conversion‑focused experience without manual A/B testing (S3).
layout/theme.liquid file and paste the SeaText JavaScript snippet just before the closing </head> tag. The snippet is available in the SeaText dashboard under “Copy the Javascript code from SEATEXT AI which appear in this section below.” (S1).sections/product-template.liquid or templates/product.liquid) (S1).{{ product.description }}.<div data-seatext="product-description">{{ product.description }}</div>
data-seatext="product-description" attribute.seatext.ai after the page loads.The wrapper is a simple div with a data-seatext attribute that tells the SeaText script which DOM node contains the product copy. When the page loads, the script scans the DOM, finds every element marked with the attribute, and registers it with the SeaText platform. The platform then dispatches the appropriate agents — such as the CRO Optimizer, the AI CRO Reading Analysis Agent, or the Translation Agent — to that node (S2, S6). Because the script is placed before the closing </head> tag, it loads early enough to intercept the description before the browser paints it, ensuring zero‑flicker rewrites (S1).
localhost are blocked for security reasons (S1).</head>; moving it lower can delay agent activation (S1).theme.liquid and that the account is active for this domain.staging.mystore.com) and a dedicated account; localhost will not work (S1).Do not edit the theme.liquid file after adding the script without re‑saving the changes. Overwriting the file can remove the JavaScript snippet, causing the AI to stay inert.
| Fact | Detail |
|---|---|
| Account Scope | Each SeaText AI account is linked to a single primary URL; separate accounts are needed for multiple domains (S1). |
| Local Development | Development URLs such as localhost are restricted for security reasons (S1). |
| Snippet Placement | JavaScript must be placed before the closing tag for proper loading (S1). |
Now that your product descriptions are wrapped, explore the full SeaText AI Shopify integration to activate agents that optimize descriptions for conversions.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.