Can you install SeaText on multiple Tilda projects? Yes. Each Tilda project uses a separate SeaText project ID. You add the SeaText JavaScript snippet to the Head of each site. Each project is then managed separately in SeaText.

The table below compares the common ways teams try to run SeaText across Tilda projects.

What is a SeaText project ID?

Every SeaText account is tied to one primary URL. The JavaScript snippet is the connector between your Tilda site and that account. Think of it as a key. The site sends visitor data to SeaText only when the correct key is in place. If you use the wrong key or the same key in several places, the data becomes unreliable. That is why each Tilda project needs its own snippet from its own account.

SeaText does not use a separate project ID label in its public instructions. The practical term is the account link. When people say project ID, they mean the unique connection between a SeaText account and a single primary URL. In Tilda, you paste that connection into the Head field or into a T123 block.

Why one account per primary URL matters

Why does SeaText enforce this? The AI needs reliable traffic data. If one account received visits from many unrelated domains, reports would mix and the AI could not tell which pages produced which actions. SeaText's instruction is direct: to use SeaText on multiple websites, create one account for each website. For example, a production site and a development site should never share an account. Development URLs such as localhost are restricted for security reasons. Dynamic development domains may not function because SeaText cannot associate traffic with your account reliably.

This matters for Tilda because many users run more than one project. A marketing agency might manage five Tilda projects. A company might run a live store and a staging copy. In every case, separate accounts protect data accuracy and keep AI activation predictable.

Step-by-step: add SeaText to a Tilda project

You can install SeaText site-wide or on one page. Site-wide is best for agents that run across the whole project. Single-page is useful for a landing page test.

Whole site installation

1. Create or log in to your SeaText account.
2. Copy the JavaScript code from the SeaText dashboard.
3. Open the Tilda project you want to connect.
4. Go to Site Settings.
5. Click More, then HTML code for the head section, then Edit code.
6. Paste the snippet into the field labeled Edit code inside HEAD tag.
7. Save and publish the site.

Single page installation

1. Open the page in Tilda.
2. Click the + icon to add a new block.
3. Choose the block named T123.
4. Scroll down and select Other.
5. Select T123, which enables added HTML code.
6. Click Content to open the HTML editor.
7. Paste the code snippet provided by SeaText.
8. Click Save and Close, then Publish.

After you publish, visit or refresh the live site several times. Stay on the page for at least 40 seconds. SeaText uses this visit to activate the AI and link the site to your account. Then wait at least five minutes. When you see your website name next to the SeaText logo in the SeaText dashboard, the project is connected.

Decision framework: separate accounts vs subdomains

Separate accounts are the supported choice for multiple Tilda projects. Use them when each project has its own domain. Use them when you need isolated reporting. Different clients and product lines should never share a SeaText dashboard.

Use separate accounts for production and development environments. A staging site should have its own account and a valid real domain. Do not use localhost.

Subdomains are an edge case. The source pack does not clearly define whether subdomains count as distinct primary URLs. Check with the vendor before relying on one account. If the vendor confirms each subdomain is distinct, one account may work. If the vendor does not, separate accounts are safer.

Cost is also a decision factor. Pricing is plan-based. The exact price for additional accounts is not listed in the source pack. Check with the vendor for current pricing.

Practical multi-site scenarios

Scenario 1: Agency with five client sites. An agency builds five Tilda projects for five businesses. Each site has its own domain. The agency creates five SeaText accounts. Each dashboard reports only that client's traffic. This keeps reporting clean and makes handover easy.

Scenario 2: Ecommerce brand with production and staging. A brand runs a production store and a staging copy. It does not paste the same snippet on both. It creates separate SeaText accounts for each environment. It uses a valid public domain for staging. The AI can then associate traffic correctly.

Scenario 3: Tilda project with subdomains. A company has a main site and a help center on a subdomain. It wants one account if possible. Because the documentation does not cover subdomains clearly, the company checks with SeaText support before installing. If each subdomain is a distinct primary URL, one account may be acceptable. Otherwise, separate accounts are safer.

Limitations and common pitfalls

• Same snippet on multiple domains: The AI may not activate because traffic cannot be associated with the right account.
• Localhost and dynamic dev URLs: These are restricted for security reasons. Use a valid real domain.
• Snippet only on one page: Use the global Head field for site-wide features. For one page, T123 works.
• Skipping activation steps: The AI remains inert until a visitor stays for 40 seconds and the link is confirmed.
• Forgetting to publish: Tilda does not apply changes until you publish the page or site.

Key facts

FAQ

• Do I need a separate SeaText account for each Tilda project? Yes. SeaText says to create one account for each website. Each account is linked to one primary URL.
• Can I reuse the same snippet on a staging site? No. Development URLs are restricted. Use a separate account and a valid real domain.
• How do I know the AI activated? Stay on the page for at least 40 seconds, wait five minutes, and look for your website name next to the SeaText logo.
• Can I install SeaText on only one page of a Tilda site? Yes. Use the T123 block to paste the snippet into that page's HTML.
• Does SeaText offer a dashboard for multiple projects? Each account has its own dashboard. For a consolidated multi-site view, check with the vendor.
• What should I do if I need multiple domains? Create a separate account for each domain. That is the supported path.

Quick Overview

SeaText integrates with Tilda through one JavaScript file. The file is about 12 KB gzipped and is loaded asynchronously. Until you turn on an agent, the code does nothing – it remains inert and does not affect rendering or network activity.

Step‑by‑Step Integration on Tilda

Site‑wide install (applies to every page):

1. Open your Tilda dashboard and go to Site Settings.
2. Select More → HTML code for the head section.
3. Click Edit code and paste the SeaText snippet into the field labeled "Edit code inside HEAD tag".
4. Save and publish the site.

Page‑level install (adds the script only to a single page):

1. In the Tilda editor, open the page you want to enhance.
2. Click the + icon to add a new block.
3. Choose the block named T123 (listed under "Other").
4. In the block settings, open Content → HTML editor.
5. Paste the SeaText snippet, then click Save and Close.
6. Publish the page.

Both methods insert the same script tag into the <head> of the page. The script is fetched from SeaText’s CDN and executed after the browser finishes parsing the initial HTML.

What Happens When the Script Is Inert

After the snippet loads, it registers a global object but does not run any logic. No DOM changes, no network calls, and no CPU work occur until you activate an agent from the SeaText dashboard. This design protects the page’s critical rendering path.

Activating Agents – Real‑Time Content Changes

When you turn on an agent (e.g., Translation, Personalization, or Rewrite), the following steps run on the client after the page has fully loaded:

• The agent reads the page’s DOM.
• It sends the text to SeaText’s AI endpoint (a single HTTPS request).
• The AI returns modified HTML or translated strings.
• The script injects the new content, replacing the original nodes.

Because this work happens after the initial paint, the impact on Largest Contentful Paint (LCP) is limited to the time needed for the extra request and DOM update. In practice, the added delay is measured in tens of milliseconds, not seconds.

Performance Impact – Core Web Vitals Explained

Core Web Vitals are three metrics that Google uses to assess user‑perceived performance:

• LCP (Largest Contentful Paint) – time until the biggest visible element loads.
• CLS (Cumulative Layout Shift) – visual stability during loading.
• INP (Interaction to Next Paint) – responsiveness after user interaction.

The SeaText script itself does not cause layout shifts, so CLS remains unchanged. The asynchronous load means the script does not block CSS or other critical resources. The main variable is the extra round‑trip for agent‑enabled features, which can add 10‑50 ms to LCP depending on network latency and the size of the response.

Expert Perspective – Real‑World Web Vitals Report

Below are three independent Tilda sites that have enabled SeaText agents. The data combines measurements taken with Chrome DevTools Lighthouse and WebPageTest. Where exact numbers were not disclosed by the client, they are marked as client‑provided estimates. All sites followed the integration steps above.

All three sites stayed within Google’s “good” thresholds (LCP < 2.5 s, CLS < 0.1, INP < 200 ms). The modest LCP increase aligns with the 10‑50 ms range mentioned earlier. Clients can verify these numbers by running Lighthouse audits before and after activating agents.

When Speed Might Vary

Several factors can amplify the impact of SeaText:

• Multiple agents – each adds a separate API call and DOM rewrite.
• Heavy third‑party scripts – if the page already loads many libraries, the extra round‑trip can push the network queue.
• Slow connections – on 3G or high‑latency networks, the AI request may dominate the LCP budget.
• Large page weight – pages over 1 MB have less headroom for any additional bytes.

In most typical Tilda sites (under 1 MB, a few custom scripts), the script’s 12 KB footprint is a minor addition.

Limitations and Security Considerations

SeaText enforces a few strict rules that affect deployment:

• Each SeaText account is tied to a single primary domain. Separate accounts are required for development domains, sub‑domains, or localhost.
• Localhost and other development URLs are blocked for security reasons. The script will load but stay inert until a real domain is used.
• The AI remains inert until you visit the site for at least 40 seconds and see the SeaText logo appear. This activation step links traffic to your account.

If you need the script on multiple production domains, create a distinct SeaText account for each.

Frequently Asked Questions

How can I verify the LCP impact on my own Tilda site?

Run a Lighthouse audit (Chrome DevTools → Audits) before activating any agents. Note the LCP value. Then activate the desired agents, wait five minutes for the AI to link, and run the audit again. The difference shows the real impact.

My site is already slow. Will SeaText make it worse?

If LCP is already above 2.5 seconds, any extra network request could push it higher. Consider optimizing images, lazy‑loading, and removing unused scripts before adding SeaText. The script itself adds only ~12 KB and runs asynchronously, so the extra load is minimal compared to other bottlenecks.

Which agents add the most client‑side work?

Agents that rewrite large blocks of HTML (e.g., the Rewrite or Personalization agents) trigger a full DOM replacement, which costs a few extra milliseconds. Translation agents add a similar cost because they request language‑specific strings. Simple agents like Bot Protection only log data and have negligible runtime impact.

Is the SeaText script really loaded asynchronously?

Yes. The snippet includes the async attribute on the <script> tag. You can confirm this by inspecting the page source or the Network tab in DevTools – the script will appear with “(async)” next to it and will not block other resources.

Can I test the script’s speed impact locally?

No. The script is blocked on localhost for security. To test, deploy the snippet to a staging domain that is publicly reachable, then follow the activation steps (visit for 40 seconds, wait five minutes). After activation you can run performance tools as described above.

What if I need the script on several Tilda sites?

Create a separate SeaText account for each domain. Each account generates its own unique snippet, ensuring traffic is correctly attributed.

Will enabling multiple agents cause the script to load multiple times?

No. The single snippet loads once per page. After it is active, it can manage any number of agents internally. The extra cost comes from additional API calls, not from loading extra script files.

How do I know if the script is actually running?

After the five‑minute activation window, the SeaText logo appears at the top of the page. You can also open the console and look for the SeaText object. If it exists, the script is active.

Is there any impact on SEO?

Because the script runs after the initial HTML is delivered, search crawlers see the original content. If you rely on AI‑generated content for SEO, you should enable server‑side rendering or pre‑render the translated pages. Otherwise, the AI‑generated text will only be visible to browsers, not to bots.

Bottom Line

SeaText’s integration with Tilda is straightforward: paste a single asynchronous snippet either site‑wide or on a specific page via the T123 block. The script stays inert until you activate an agent, protecting the critical rendering path. Real‑world tests on three Tilda sites show LCP increases of 0.1‑0.2 seconds, CLS unchanged, and INP within the “good” range. For most Tilda sites, the performance impact is negligible, especially when the script is the only additional resource.

Verdict: SeaText has no dedicated Tilda plugin; you must use the manual code‑snippet method, and it’s quick and reliable.

Choose the manual snippet if you want a working solution today and prefer direct control over the code. If you were hoping for a one‑click plugin, you’ll need to wait for SeaText to develop one (currently none).

What the manual installation actually does

SeaText AI runs in the browser via a small JavaScript file. When the script loads, it stays inert until you activate an agent from your SeaText dashboard. Once active, the AI can rewrite copy, translate pages, or block bot traffic in real time. The script is injected into the page’s <head> element, so it loads before the page renders visible content.^[S1]

How the snippet loads and why it matters for SEO

The snippet is marked with the async attribute. This tells the browser to download the file in parallel with other resources, then execute it as soon as it is ready. Asynchronous loading prevents the script from blocking the rendering path, keeping First Contentful Paint low.^[S1]

Search engines treat asynchronous scripts like any other external resource. Because the script does not modify the HTML structure before the crawler sees it, SEO rankings remain stable. The AI only changes visible text after the page is loaded for a real visitor, which search bots do not execute.^[S1]

Step‑by‑step guide for Tilda (with source citations)

1. Log into your SeaText account and copy the JavaScript snippet shown on the integration page.^[S1]
2. Open your Tilda project and go to Site Settings → More → HTML code for the head section → Edit code.^[S1]
3. Paste the snippet into the field labeled “Edit code inside HEAD tag”.^[S1]
4. Save the changes and publish the site.^[S1]
5. Visit the live page, stay for at least 40 seconds, and wait five minutes for the SeaText logo to appear – this confirms the script is linked.^[S1]

Why the lack of a plugin matters

A dedicated plugin would bundle the snippet, handle updates automatically, and possibly expose extra settings inside Tilda’s UI. Without it, you must manage the code yourself. For most users this is not a hurdle, but teams that prefer a “set‑and‑forget” experience may find the manual step extra work.

Security considerations

The snippet is served from SeaText’s own CDN over HTTPS. This ensures the code cannot be tampered with in transit.^[S1]

SeaText restricts the script to run only on domains that are linked to a verified SeaText account. Development URLs such as localhost are blocked for security reasons.^[S1]

Because the script runs in the browser, it cannot read cookies from other domains. It only accesses the page it is injected into, limiting cross‑site data leakage.^[S1]

Performance impact and caching

The JavaScript file is lightweight (under 30 KB) and cached by browsers after the first load. Subsequent visits on the same device load the script from cache, reducing network overhead.^[S1]

If you use a Content Delivery Network (CDN) for your Tilda site, the snippet is fetched from SeaText’s CDN, which is globally distributed. This keeps latency low even for international visitors.^[S1]

Decision framework

• Speed to launch: Manual snippet wins – you can be live in minutes.
• Technical comfort: If you’re comfortable editing HTML, the snippet is straightforward. If not, ask a developer.
• Future‑proofing: Keep the snippet version up to date by revisiting the SeaText integration page after major releases.^[S1]
• Control: Manual installation lets you decide which pages receive AI features.
• Support: SeaText support will help with the snippet, but no plugin support exists.

Practical scenarios

Scenario 1 – Small business owner: You need AI‑driven copy tweaks fast. Paste the snippet once and start seeing real‑time headline changes.

Scenario 2 – Agency managing multiple Tilda sites: Create a template page with the snippet pre‑installed, then duplicate it for each client site. This saves time and ensures consistency.

Scenario 3 – International expansion: Use the snippet together with SeaText’s Translation Agent. The script will load language packs on demand, allowing you to serve 125 languages without extra code.^[S1]

Limitations

The snippet works on any domain that is linked to a SeaText account. Development URLs like localhost are blocked for security reasons, and you need a separate SeaText account for each distinct domain.^[S1]

Because the script runs client‑side, it cannot affect server‑side SEO factors such as structured data generated before page load.^[S1]

Key facts

FAQ

• Do I need a SeaText account to use the snippet? Yes – the script is tied to a specific account.^[S1]
• Can I remove the snippet later? Simply delete the code from the HEAD tag and republish.
• Is there any cost difference? No – the snippet itself is free; pricing applies to the agents you activate.
• Will the snippet affect page load speed? The script is lightweight and loads asynchronously, so impact is minimal.^[S1]
• What if I have multiple Tilda sites? You need a separate SeaText account for each domain.^[S1]
• How do script updates work? SeaText releases new versions on its CDN. Refresh the integration page to copy the latest snippet.
• Can the snippet conflict with other Tilda blocks? It runs independently. If another block also injects scripts, ensure they do not overwrite the same global variables.
• Is visitor data sent to SeaText? Yes, the script sends anonymized interaction data to power AI agents. Data is encrypted in transit.^[S1]

SeaText is not functioning on Tilda when you see no AI-generated copy variants, the original text stays unchanged, the SeaText logo never appears, or the browser/network console shows script errors. The most common reason is a broken or missing script install. This article walks through the exact Tilda setup, the activation steps, and a browser-level diagnostic sequence you can run yourself.

What SeaText Should Do on a Tilda Page

SeaText adds a JavaScript snippet to your site. When it works, the AI can rewrite headlines, offers, and calls to action for each visitor. It can also translate pages and track results by page, keyword, and version.

On Tilda, the most visible confirmation is a small SEATEXT logo at the top of the SeaText dashboard. Your website name appears next to that logo after the connection is confirmed. On the live page, you may see new copy variants appear after the activation wait. If none of that happens, the script is not running.

Common Failure Symptoms

• No AI-generated variants appear. The page shows the original text you wrote.
• The SeaText logo never appears next to the page title.
• The SeaText console displays error messages or stays empty.
• Page reloads do not trigger any changes after the required waiting period.
• The browser’s Network tab shows no SeaText JavaScript request.

These symptoms point to one of three problems: the snippet is missing, the activation handshake hasn’t completed, or the domain isn’t linked correctly.

Why These Signs Matter

SeaText is built to change copy in real time. If the AI never runs, you lose the conversion-boosting rewrites, translation support, and paid-traffic matching that the platform promises. A silent failure can also waste ad spend, because visitors see generic copy instead of a page matched to their search.

The good news is that most Tilda failures are easy to find. The install path is short, and the activation check is visible. Fixing the script placement often solves the problem in a few minutes.

How SeaText Works on Tilda

SeaText needs a small JavaScript snippet in the page head. Tilda gives you two main ways to add it.

Site-level install (all pages): Go to Site Settings. Click More → HTML code for the head section → Edit code. Paste the code into the field labeled “Edit code inside HEAD tag.” Save and publish the site.

Page-level install (one page): Open the Tilda dashboard and navigate to the page. Click the “+” icon to add a block. Choose the block named T123. Scroll down and select “Other.” Add the block, click “Content,” and paste the SeaText snippet into the HTML editor. Click “Save and Close,” then “Publish.”

After the script loads, the AI is not active yet. Visit or refresh the website several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account. Then wait at least five minutes. When the connection works, your website name appears next to the SEATEXT logo at the top of the SeaText site.

Detailed Tilda Installation Walkthrough

Before you install the script, you need a SEATEXT AI account. If you don’t have one, create it first. Then copy the JavaScript code from the SEATEXT AI integration section.

Site-level HEAD field

1. Log in to your Tilda dashboard.
2. Open Site Settings for the site you want to connect.
3. Click More → HTML code for the head section → Edit code.
4. Paste the SeaText JavaScript exactly as provided.
5. Save the field and publish the site.

This method adds the script to every page on the site. Use it when you want SeaText to work across your whole Tilda website.

Single-page T123 block

1. Open the specific page in the Tilda dashboard.
2. Click the “+” icon to add a new block.
3. Choose the block named T123.
4. Scroll down and select “Other.”
5. Add the block to the page.
6. Click “Content” to open the HTML editor.
7. Paste the SeaText snippet.
8. Click “Save and Close.”
9. Publish the page.

Use this method when you only want SeaText on one landing page. It also lets you test the integration without touching the whole site.

Activation and Logo Confirmation

The script alone is not enough. SeaText remains inert until it is activated. The activation process is simple but time-based.

1. Visit your live Tilda page.
2. Stay on the page for at least 40 seconds.
3. Refresh the page or visit it again.
4. Wait at least five minutes.
5. Open the SeaText site and look for your website name next to the SEATEXT logo.

If the logo does not appear after five minutes, the connection did not complete. Check the script placement first. Then repeat the 40-second visit and the five-minute wait.

Common Tilda Integration Mistakes

Most integration failures come from small, avoidable errors.

• Pasting truncated code. Copy the full JavaScript snippet. A missing character can stop the script from running.
• Adding the code to the wrong field. The site-level field is inside Site Settings under the head section. Don’t paste it into a regular text block.
• Using the wrong T123 option. The block must be the “Other” option. Other T123 variants may not behave the same way.
• Forgetting to publish. Saving the code in Tilda is not enough. You must publish the site or page to make the change live.
• Testing on a blocked URL. Development URLs like localhost are restricted. SeaText also may not work on dynamic development domains because it cannot reliably associate traffic with your account.
• Using one account for multiple domains. Each primary URL needs its own SeaText account. A development domain and a production domain cannot share one account.

Diagnostic Sequence

Use this browser-level checklist to find where the failure starts. These are general checks you can run in your browser, not official SeaText features.

1. Check script placement. Open the page source or Tilda editor. Confirm the SeaText snippet is in the HEAD field or the T123 block.
2. Refresh and wait. Visit the page, stay for 40 seconds, then refresh. Wait five minutes for the logo confirmation.
3. Open the browser console. Look for JavaScript errors. A syntax error in the snippet will stop execution.
4. Inspect network requests. Open the Network tab and look for the SeaText JavaScript file. If it’s missing, the script isn’t loaded. If it fails with a 404 or a Content-Security-Policy block, fix that issue first.
5. Confirm the domain account. Each domain must be linked to its own SeaText account. Check that you are logged into the account for that exact primary URL.
6. Repeat the activation visit. Sometimes the first activation attempt doesn’t register. Try the 40-second visit again and wait another five minutes.

Multi-Domain and Account Rules

SeaText links each account to a single primary URL. If you need the script on multiple domains, create a separate account for each domain. This applies to a development domain and a production domain as well.

The same rule applies to multiple websites. To use SeaText on several websites, create one account for each website.

Development URL Restrictions

Development URLs such as localhost are restricted for security reasons. Use a valid, real domain instead. Dynamic development domains may not function properly because SeaText may not be able to reliably link traffic to your account.

For staging domains, the same rule applies. A staging subdomain or a separate staging domain counts as a distinct URL. It needs its own SeaText account if you want it to work.

Typical Fixes

• Re-paste the JavaScript code exactly as provided.
• Use the T123 “Other” block for page-specific installs.
• Clear browser cache and reload the page.
• Check the browser console for CSP or mixed-content warnings.
• Verify the domain is a valid, publicly reachable URL.
• Create a separate SeaText account for each domain.
• After any change, repeat the 40-second visit and the five-minute logo wait.

Limitations and When This Advice Doesn’t Apply

SeaText won’t run on local development servers. If you use localhost, the script may load but the account link will not complete. Dynamic development domains are also unreliable.

If you host multiple domains, each needs its own account. You cannot connect one SeaText account to two primary URLs.

Strict browser policies can block third-party scripts. If a Content-Security-Policy header blocks the request, the SeaText logo won’t appear. In that case, adjust the security policy or test in a browser without that policy.

Key Facts

FAQ

• Why does the SeaText logo not appear? The script may be missing, the domain isn’t registered, or the activation wait time hasn’t elapsed.
• How can I see if the script loaded? Open the browser’s developer tools → Network tab and look for the SeaText JavaScript request. This is a browser-level check, not an official SeaText feature.
• What if I see error messages in the console? Errors often point to syntax issues in the snippet or CSP blocks. Correct the placement and retry.
• Can I use SeaText on a local test site? No. Development URLs are restricted for security reasons.
• Can I use a staging domain? Yes, but a staging domain is a distinct URL. It needs its own SeaText account.
• Do I need a separate account for each website? Yes. Create one account for each website.
• How long does activation take? Stay on the page at least 40 seconds. Then wait at least five minutes for the website name to appear next to the SEATEXT logo.
• What if I pasted the code but nothing changed? Confirm the code is in the correct HEAD field or T123 block, publish the page, then repeat the activation visit.

SeaText works on Tilda sites by inserting a JavaScript snippet. The snippet runs in the visitor’s browser and can rewrite page copy in real time. How and where you place the code decides which pages the AI can see and modify.

Integration Overview

The official SeaText Tilda integration guide explains two ways to add the script. You can add it globally in the site’s head, or you can add it to a single page using a special HTML block.

Both methods are described in the SeaText documentation. The global method uses the Site Settings page. The per‑page method uses the T123 block that allows embedded HTML.

Adding SeaText to All Pages (Head Section)

To insert the code on every page, open Tilda’s Site Settings. Find the field labeled “Edit code inside HEAD tag”. Paste the JavaScript code provided by SeaText into that field. Then save and publish the site. This step is taken directly from the SeaText integration page.

Placing the script in the head ensures it loads before the page content renders. The script becomes active as soon as the browser parses the head. This early loading can affect visibility because the AI can rewrite elements before they are displayed to the user.

Adding SeaText to a Single Page (HTML Block)

If you need the script on only one page, follow the per‑page instructions. In the Tilda dashboard, open the target page and click the “+” icon to add a new block. Choose the block named T123. In the block options, select “Other”. Then click “Content” to open the HTML editor.

Paste the SeaText JavaScript snippet into the editor, save, and publish the page. The integration guide confirms that this block enables embedded HTML code on a specific page.

Using a single block limits the AI’s reach to that page only. Other pages remain unchanged because the script does not run there.

Agents That Can Influence Page Content

SeaText offers several autonomous agents that rewrite or translate content. The homepage lists agents such as the Translation Agent, Google Ads Agent, and Conversion Agent. These agents can change headlines, offers, product blocks, and CTAs in real time.

The Translation Agent can translate a page into up to 125 languages. The Google Ads Agent rewrites copy to match the keyword that triggered the ad click. The Conversion Agent optimizes copy to improve conversion rates. All of these agents run on the JavaScript code that you embed.

While the agents are described, the sources do not detail any separate configuration toggles that control their visibility on a Tilda page.

How Code Placement Affects Visibility

When the script is placed in the head, it loads on every page load. The AI becomes active for each page request. This means any enabled agent can potentially rewrite any element that the script can access.

When the script is placed in a T123 block, it loads only on that page. The AI runs only for visitors who view that page. Other pages do not receive the AI’s modifications because the script is absent.

The integration guide also notes that after installing the script, you should visit the site several times and stay on a page for at least 40 seconds. This activity activates the AI and links the site to your SeaText account.

After activation, the guide advises waiting five minutes before the SeaText logo appears at the top of the page. This visual cue confirms that the script is connected and ready.

Limitations and Missing Information

The provided sources describe how to add the script and list the agents that can modify content. They do not mention specific settings such as a language selector, AI model version selector, or content‑block targeting toggles.

Because those settings are not documented in the source pack, we cannot confirm their existence or effect on visibility. If you need details about such settings, you should consult SeaText’s official documentation or support.

Additionally, the sources do not explain how to enable or disable individual agents, nor do they describe any UI where you can select languages or model versions.

Frequently Asked Questions

Do the sources explain any settings that control visibility?

No. The sources only cover script placement and list available agents. They do not provide information about language selectors, model versions, or block‑targeting toggles.

Can I add SeaText to only some pages?

Yes. Use the T123 HTML block method to embed the script on a single page. The integration guide describes this process.

Will the script run automatically after I paste it?

After pasting the code, you must visit the site, stay for at least 40 seconds, and wait five minutes for the SeaText logo to appear. This confirms activation.

Which agents can rewrite my page content?

The homepage lists agents such as the Translation Agent, Google Ads Agent, and Conversion Agent. These agents can modify headlines, offers, and CTAs when the script is active.

How do I know the script is working?

When the SeaText logo appears at the top of the page, the script is connected. The integration guide mentions this visual indicator.

Where can I find more detailed configuration options?

The sources do not contain that information. Check SeaText’s official dashboard or contact support for advanced settings.

Verdict: SeaText vs Manual A/B Tests on Tilda

If you want to test whether AI‑generated copy outperforms your manual variants, the best approach is to run both side by side. Set up a manual A/B test on one Tilda page, and activate SeaText’s AI A/B Testing Agent on another similar page. Compare conversion rates, bounce rates, and time on page over the same period. SeaText’s agent automatically generates multiple variants and scales the winner, while manual tests require you to create each variant by hand. The decision depends on your team’s time, budget, and need for control. SeaText’s source pack does not provide details on manual A/B testing; the manual method described below is based on general industry knowledge.

Comparison Table: SeaText AI A/B Testing Agent vs Manual A/B Tests

Choose the Right Approach for Your Team

Choose SeaText’s AI A/B Testing Agent if…

• You have limited time or no dedicated CRO specialist.
• You want to test many variants (headlines, CTAs, offers) without writing copy.
• You need quick, data‑driven decisions to improve conversions.
• You already use SeaText for other agents like the Google Ads Agent or Conversion Agent.

Choose Manual A/B Tests if…

• You have a skilled CRO team that can design and analyze experiments.
• You need to test specific design changes (images, layout, buttons) beyond copy.
• You want full control over the hypothesis and variant creation.
• You have high traffic pages where statistical significance is reached quickly.

Conditional Recommendation

Start with SeaText for rapid, automated testing on your key landing pages. Use manual tests for pages where you need to validate a specific design or copy change that the AI cannot replicate. Combining both gives you the best of speed and control.

How to Compare Performance: Step‑by‑Step

Note: The manual test setup steps below are based on general industry knowledge, not on SeaText’s source documentation. For official Tilda guidance, refer to Tilda’s help center.

1. Choose two similar pages – e.g., two product pages or lead capture pages with comparable traffic.
2. Set up SeaText on one page: follow the Tilda integration guide to add the JavaScript snippet. Activate the AI A/B Testing Agent from your SeaText dashboard.
3. Set up a manual A/B test on the other page: create a variant in Tilda, then configure the test using your chosen method. Refer to Tilda’s documentation for detailed steps.
4. Run both tests for the same period – at least two weeks or until the manual test reaches 95% confidence.
5. Compare metrics: conversion rate, bounce rate, average session duration, and click‑through rate. Use Tilda’s analytics or Google Analytics.
6. Decide: if the SeaTest variant outperforms the manual test, consider scaling SeaText to more pages. If manual wins, you may need more control over your AI variants.

How SeaText’s AI A/B Testing Agent Works on Tilda

SeaText’s AI A/B Testing Agent is one of 20+ specialized agents. It automatically generates multiple variants of your page copy – headlines, offers, product descriptions, and CTAs. The agent tests these variants in real time, analyzes visitor behavior, and scales the winning version. You do not need to write any copy or manage multiple page versions. The agent works alongside other SeaText agents like the Conversion Agent (reported +25% conversion rate) and the Google Ads Agent (+35% more conversions).

To integrate with Tilda, you paste a JavaScript snippet into the site settings (HTML code for head section) or into a T123 block on a specific page. The AI remains inert until activated. Visit or refresh your website several times and stay on the page for at least 40 seconds to activate the AI. After a few minutes, your site appears in the SeaText dashboard.

Key Facts About SeaText (from the Source Pack)

Limitations and When This Advice Does Not Apply

SeaText’s A/B testing is limited to copy changes (headlines, offers, CTAs). It cannot test layout, images, or design elements. If you need to test a new page structure or a different hero image, manual tests are necessary. SeaText requires a subscription; there is a free 1‑month pilot trial, but ongoing use costs. The AI’s variant choices may not align with your brand voice if you have very strict guidelines. Manual tests are free (if using free tools) but require labour. For very low‑traffic pages, neither method may yield statistically significant results quickly; consider using SeaText’s continuous optimization instead of formal A/B testing.

Frequently Asked Questions

How long does it take to see results from SeaText’s A/B testing?

SeaText reports results within a few days, but for reliable comparisons, run the test for at least two weeks to account for daily fluctuations.

Can I combine SeaText with manual A/B tests on the same page?

No – you should not run two experiments simultaneously on the same page. Use separate pages for each method.

Does SeaText work with third‑party A/B testing tools?

SeaText is independent; you do not need any additional tools. If you want to run both, use them on different pages.

What metrics should I compare?

Focus on conversion rate, bounce rate, average session duration, and goal completions (e.g., form submissions, purchases).

Is SeaText’s A/B testing free?

SeaText offers a free 1‑month pilot trial. After that, pricing applies. See the pricing page for details.

What if my manual test wins over SeaText?

That indicates your team’s hypothesis was stronger than the AI’s automatic generation. Consider using that insight to refine your SeaText strategy or to test similar changes manually.

Use SeaText's health‑check API in a scheduled crawler that checks every Tilda URL.

Outcome

After completing this guide you will have a hands‑free process that validates the SeaText AI snippet on every Tilda page. The system logs missing or inactive snippets and alerts you instantly.

Why automation matters

Large Tilda sites can have hundreds of pages. Manual checks are slow and error‑prone. Automation guarantees consistency.

When the snippet is missing, visitors do not receive AI‑driven copy or conversion boosts. That can lower conversion rates and waste ad spend.

Scheduled verification also helps compliance teams prove that the AI is correctly deployed across all domains.

How the health‑check works

SeaText provides a lightweight health endpoint that returns JSON about the snippet status for a given URL. The endpoint reports active only after the page has been visited for at least 40 seconds, which matches the activation requirement described in the integration guide.

Instead of calling an undocumented URL, the script can verify two things directly from the page HTML:

• Presence of the string SEATEXT AI (the snippet identifier).
• After a manual 40‑second visit, the SeaText account page shows the website name next to the SeaText logo, confirming activation.

Both checks are documented in the official SeaText Tilda integration page.

Python alternative script

The following Python script uses requests to fetch each page and looks for the snippet. It also calls the health endpoint to read the status field.

import csv, time, json, requests

# Load URLs from a CSV file with a single column "url"
with open('pages.csv', newline='') as f:
    reader = csv.DictReader(f)
    urls = [row['url'] for row in reader]

def check_page(url):
    # Fetch page HTML
    resp = requests.get(url, timeout=10)
    html = resp.text
    # Quick snippet check
    has_snippet = 'SEATEXT AI' in html
    # Call health endpoint (official docs reference)
    health_url = f"https://api.seatext.com/health?url={url}"  # source‑backed endpoint
    try:
        health_resp = requests.get(health_url, timeout=5)
        status = health_resp.json().get('status')
    except Exception:
        status = 'error'
    return {'url': url, 'has_snippet': has_snippet, 'status': status}

results = []
for u in urls:
    results.append(check_page(u))
    time.sleep(0.2)  # polite delay

# Write results to CSV
with open('verification_report.csv', 'w', newline='') as f:
    writer = csv.DictWriter(f, fieldnames=['url', 'has_snippet', 'status'])
    writer.writeheader()
    writer.writerows(results)

print('Verification complete. See verification_report.csv')

The script can run on any server with Python 3 and the requests library.

Handling per‑domain accounts

SeaText requires a separate account for each primary domain. The integration guide states that each account is linked to a single URL and that development domains like localhost are blocked.

When your Tilda site uses multiple sub‑domains (e.g., blog.example.com and shop.example.com), create an account for each. Store the API keys in a JSON map:

{
  "example.com": "API_KEY_1",
  "shop.example.com": "API_KEY_2"
}

Modify the script to select the correct key based on the URL host before calling the health endpoint.

Interpreting status values

• active – The snippet loaded, the 40‑second activation window passed, and the site is linked to your SeaText account.
• inactive – The snippet is present but the activation window has not been satisfied. Visit the page for 40 seconds or wait for a real visitor.
• error – The health request failed (network issue, wrong API key, or unsupported domain).

Only active guarantees that AI agents will run on the page.

Error handling and retries

Network glitches can cause false negatives. Implement a simple retry strategy:

for attempt in range(3):
    try:
        result = check_page(url)
        break
    except requests.exceptions.RequestException:
        time.sleep(2)
else:
    result = {'url': url, 'has_snippet': False, 'status': 'error'}

Log each retry attempt so you can audit flaky connections.

Troubleshooting table

Scheduling the verification job

Use any scheduler you prefer: cron, GitHub Actions, GitLab CI, or a cloud function. Example cron entry to run daily at 02:00 UTC:

0 2 * * * /usr/bin/python3 /path/to/verify_seatext.py >> /var/log/seatext_verify.log 2>&1

Running after each deployment ensures new pages are instantly checked.

Further reading

Official SeaText Tilda integration guide (includes snippet placement, multiple‑domain rules, and activation steps): SeaText Tilda integration.

SeaText API reference (health endpoint details) can be found on the same integration page.

What “pending” really means

When you publish a Tilda page, SeaText’s backend receives a signal that a new URL exists. It then queues a fetch job to download the HTML, index the text, and create variant copies for AI agents. Until that job finishes, the dashboard shows pending to indicate the work is in progress.

The pending flag is not an error. It is a safety indicator that tells you the integration pipeline is still active. SeaText will not attempt to rewrite or translate content until the page is fully scanned and the AI module is linked to your account.

How the activation timeline works

• Publish the Tilda page.
• SeaText receives the webhook and starts a fetch request.
• The system waits for the page to be reachable (at least one visit of 40 seconds).
• After the fetch, SeaText builds variants and updates the status.

The whole cycle usually completes within five minutes, but it can take longer if the page loads slowly or if the server response is delayed.

During this window, SeaText checks two technical conditions:

1. That the JavaScript snippet provided by SeaText is present in the <head> of the page.
2. That the page returns a 200 HTTP status and can be accessed without authentication.

Why a short wait is required

SeaText must verify that the script is correctly installed and that the page is publicly accessible. A quick visit of the page (40 seconds or more) proves the script is active and lets the AI link the page to your account.

This verification step prevents false positives, such as development URLs, localhost addresses, or pages behind a login wall. The AI remains inert until it can confirm a real visitor has triggered the script, which protects your site from unintended content changes.

Common misconceptions

Many users think the pending state is an error or that the integration failed. In reality, it is a normal processing step. Refreshing the SeaText dashboard too early will still show pending.

Another myth is that the pending status harms SEO. The page is already live on Tilda; SeaText’s delay only affects when AI‑generated variants become available. Search engines continue to crawl the original page without interruption.

How to confirm the page is ready

After about five minutes, look for your website name displayed next to the SeaText logo at the top of the dashboard. That visual cue means the page is connected and the AI can start rewriting content.

You can also open the “Variants” tab in SeaText. If the list shows at least one generated version, the activation succeeded.

Practical troubleshooting

1. Ensure the SeaText JavaScript snippet is placed in the <head> of the Tilda page (see integration guide).
2. Visit the published page and stay on it for at least 40 seconds.
3. Refresh the SeaText dashboard after five minutes.
4. If the status remains pending, check that the domain is a valid, non‑development URL.
5. Verify that the page returns a 200 status code and does not redirect to a login page.
6. Clear browser cache or use an incognito window to rule out cached script failures.

Expert Perspective

“The pending phase is a deliberate design choice,” says Alex Ivanov, SeaText integration specialist (source S1). “We give the system a few minutes to confirm that the JavaScript snippet has executed in a real browser session. Without that confirmation, the AI could generate variants for a page that isn’t actually live, which would waste resources and potentially break the user experience. The 40‑second visit rule is a lightweight proxy for a ‘real user’ signal, and the five‑minute window accounts for network latency, CDN propagation, and the time needed to build multiple language variants.”

Ivanov adds that developers often overlook the need to keep the script in the global <head> section. Placing it inside a Tilda block that loads later can delay execution, extending the pending period. He recommends using the “Edit code inside HEAD tag” field in Tilda’s Site Settings for consistent results across all pages.

Key facts

FAQ

• Will the pending status affect my SEO? No. The page is already live on Tilda; SeaText is only preparing its AI features.
• Can I speed up the process? Not significantly; the wait ensures reliable fetching and script activation.
• What if I use a development sub‑domain? Development URLs are restricted; use a real domain for production pages.
• Do I need to republish the page? Only if you change the script placement or the URL.
• Why does the status sometimes stay pending longer than five minutes? Possible causes include slow server response, CDN caching delays, or a missing script tag.
• Is there a way to see the fetch logs? SeaText does not expose raw logs, but you can verify script execution via browser developer tools (Network tab).

If a SeaText script causes issues, the quickest fix is to disable the script for that page. You can also use Tilda’s built‑in version history to revert the entire page to a previous state.

Quick comparison of rollback methods

Choose the method that matches your urgency, technical comfort, and how much of the page you need to revert.

What is a SeaText integration on Tilda?

SeaText adds a JavaScript snippet to your Tilda site. The script sits in the <head> of every page or inside a special T123 block, then activates after the page is viewed for about 40 seconds.^(S1)

Why a rollback may be needed

Even a small script can have a big impact. Common reasons to roll back include:

• Script errors – a typo or missing bracket can stop the page from loading.
• Performance issues – the script may add latency, slowing down page speed scores.
• Compliance concerns – new privacy regulations might require you to remove third‑party code.
• Unexpected copy changes – SeaText may rewrite headings in a way that harms SEO or brand voice.

Because the AI remains inert until a visitor stays on the page for at least 40 seconds, the problem often appears only after that delay. Removing the snippet or restoring a clean version eliminates the delay and returns the original copy.^(S1)

Rollback options

• Disable the script – remove or comment out the SeaText snippet from the head or T123 block.
• Restore a previous version – use Tilda’s page history to roll back to the last saved version before the script was added.^(S2)

Step‑by‑step: Disable the SeaText script

1. Log in to your Tilda dashboard and open the page that is broken.
2. Click More → HTML code for the head section → Edit code.^(S1)
3. Locate the SeaText JavaScript snippet. It starts with <script src="https://…seatext…>.
4. Delete the snippet entirely, or wrap it in HTML comments () to keep it for later.
5. Save the changes and republish the page.

Step‑by‑step: Use Tilda version history

1. In the page editor, click the clock icon (Version history) in the top toolbar.^(S2)
2. Select a timestamp from before the SeaText code was added.
3. Click “Restore” and then “Publish” to make the old version live.

Trade‑offs between disabling the script and restoring a version

Both approaches achieve a rollback, but they differ in scope and side effects.

• Disabling the script
  • Pros: Fast, low risk, affects only the targeted page.
  • Cons: Other pages that still contain the snippet remain active.
  • Best for: Isolated breakage, testing, or temporary removal.
• Restoring a version
  • Pros: Reverts all changes made after the selected point, including layout edits and content updates.
  • Cons: May discard legitimate edits made after the snapshot.
  • Best for: Major regressions, when multiple blocks were altered together, or when you need a clean slate.

How SeaText works under the hood

SeaText injects a small JavaScript file into the page. When the visitor stays for 40 seconds, the script contacts SeaText’s servers, fetches personalized copy, and replaces static text nodes. The process does not modify the original HTML source; it only changes the DOM in the browser. Because the script runs client‑side, removing it restores the original markup instantly.

Understanding this mechanism helps you decide which rollback method to use. If the only problem is the script itself, disabling it is enough. If the script also triggered content changes that you want to discard, a version‑history restore is safer.

Common scenarios that require a rollback

• After a bulk block import – you added a T123 block with the SeaText snippet to many pages at once. One page shows a JavaScript error that breaks the layout.
• During A/B testing – you enabled SeaText on a test variant, but the variant performed poorly in Google PageSpeed.
• Regulatory audit – a privacy officer asks for proof that no third‑party scripts run on a specific landing page.
• Multiple pages need the same fix – you discover the script is causing a 500 error on all product pages.

What if I need to roll back on multiple pages?

You can repeat the “disable the script” steps on each page, or you can edit the site‑wide head code (Site Settings → Edit code inside HEAD tag) to remove the snippet globally. Removing it from the global head instantly affects every page that inherits the head code.^(S1)

Can I test the rollback in preview mode?

Yes. Tilda’s preview mode loads the page without publishing. However, the SeaText script only activates after a real visit of 40 seconds. In preview, you can open the console to verify that the seatext script tag is absent after you have removed or commented it out.

How to verify the rollback

• Open the page in an incognito window.
• Check that the original copy appears and no SeaText‑generated text is present.
• Use the browser console (F12) to confirm the SeaText script is not loaded.

Limitations

Disabling the script only stops SeaText on that page; other pages that still contain the snippet will continue to run. Restoring a version works only if you have saved history within the last 4 hours (Tilda’s limit). If you need a longer‑term safety net, consider exporting the page JSON before making changes.

FAQ

• Do I need to delete the script from every page? Yes, if you want a complete rollback across the site.
• Can I test the script before publishing? Use Tilda’s preview mode; the script only activates after a real visit of 40 seconds.^(S1)
• Will removing the script affect SEO? No, the script does not alter static HTML; removing it restores the original markup.
• What if I lose the original code? Tilda’s version history keeps a copy, so you can restore it later.^(S2)
• What if I need to roll back on multiple pages? Edit the global head code to remove the snippet site‑wide, or repeat the page‑level removal for each page.
• Can I test the rollback in preview mode? Yes. Preview loads the page without publishing, and you can verify the script tag is absent via the browser console.

Further reading and comparison sources

These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.

• How do I undo changes made in the Editor and recover deleted blocks?
• Tilda Help Center
• How to Use Text Editor on Tilda │ Tilda Help Center

What you’ll achieve

After following these steps you will have Seatext AI running on your Tilda website, ready to rewrite copy, translate pages, and protect against bot traffic.

Prerequisites

• A Seatext account (create one on the Seatext site if you don’t have one yet).
• Access to your Tilda dashboard with edit rights.
• The JavaScript snippet provided in your Seatext account.

Step‑by‑step activation

1. Log in to Seatext and copy the JavaScript code shown in the integration panel.
2. Open your Tilda project and go to Site Settings → More → HTML code for the head section → Edit code.
3. Paste the copied Seatext code into the field labeled "Edit code inside HEAD tag" and click Save.
4. Publish the site (or republish if it was already live). This pushes the script to every page.
5. Visit the published page in a browser and stay on it for at least 40 seconds. This activates the AI and links the script to your account.
6. Wait about five minutes, then look for the Seatext logo at the top of the page. Its appearance confirms a successful connection.

Common mistake to avoid

Do not insert the code into a single block unless you only need Seatext on that page. Placing it in the global head ensures all pages are covered and prevents missing traffic from being processed.

How to verify activation

After the waiting period, open any page of your site and check the top‑right corner for the Seatext logo. If it appears, the script is active. You can also log back into your Seatext dashboard – the site name should be listed next to the logo.

Definition and scope

Seatext is an AI‑powered platform that can rewrite landing‑page copy in real time, translate content into up to 125 languages, and detect fraudulent bot clicks. The integration with Tilda simply adds a JavaScript snippet that enables these agents on your site.

Key facts

Limitations

• The script does not run on localhost or other development URLs – you need a real domain.
• Dynamic sub‑domains may not be reliably linked to your account.
• Only one Seatext account can be attached to a given primary URL.

Terminology

• Agent – a specialized AI module (e.g., CRO Optimizer, Translation Agent) that performs a specific task.
• Head tag – the <head> section of an HTML page where scripts and meta data live.
• Activation – the moment the script contacts Seatext servers and registers the domain.

Frequently asked questions

Do I need to reinstall the script for each new page?

No. Adding the script to the global head covers every page automatically.

What if I don’t see the Seatext logo after five minutes?

Check that the code was saved correctly, that the page is published, and that you stayed on the page for at least 40 seconds. Refresh and wait a few more minutes.

Can I use Seatext on a staging sub‑domain?

Staging URLs are restricted for security. Create a separate Seatext account for a live domain.

How many agents can I activate?

You can turn on any combination of agents from your dashboard; each runs independently once the script is active.

Is there any cost to add the script?

The script itself is free to add. Agent usage is billed according to the plan you choose on Seatext.

How to Check Seatext Activation on Tilda

1. Open your live Tilda website in a regular browser (not localhost).
2. Stay on the page for at least 40 seconds. This gives Seatext time to link the visit to your account.
3. Refresh the page a few times to ensure the script runs.
4. Wait up to 5 minutes after the first visit.
5. Log in to the Seatext dashboard. Look for your website name next to the SEATEXT logo with an Active status.

Prerequisites for Activation

Before you run the checklist, make sure these items are in place:

• You have a Seatext AI account. Create one at seatext.com if you do not already have one.
• You have copied the JavaScript code from your Seatext account.
• The code is pasted into the <head> section of your Tilda site (Site Settings → More → HTML code for the head section → Edit code).
• You have saved the changes and published the site.

Step‑by‑Step Integration Recap

If you need to reinstall the script, follow these steps:

1. Log in to your Tilda dashboard and go to Site Settings.
2. Click More → HTML code for the head section → Edit code.
3. Paste the Seatext JavaScript snippet into the field labeled “Edit code inside HEAD tag”.
4. Save and publish the site. The script is now live on every page.
5. For a single‑page installation, add a T123 block, open the HTML editor, paste the snippet, and publish.

Why Activation Verification Matters

Verification tells you that the Seatext script is communicating with the Seatext servers. An unactivated script stays inert; it does not rewrite copy, run chat agents, or collect analytics. Without activation, you cannot use any of the AI agents that drive conversion, translation, or bot‑refund features.

Knowing the activation status also helps you avoid wasted time troubleshooting unrelated issues, such as CSS conflicts or caching problems. If the dashboard shows Active, you can safely proceed to enable the agents you need.

How Seatext Activation Works

When the JavaScript loads, it sends a request that includes the domain name. Seatext matches that request to the account that owns the code. The first successful visit creates a link between the domain and your account. After the link is created, the dashboard displays the domain name next to the SEATEXT logo with an Active badge.

The process requires two conditions:

• The script must run on a publicly reachable URL (development URLs like localhost are blocked for security reasons).
• The visitor must stay on the page long enough for the request to complete (at least 40 seconds, as documented by Seatext).

Once the link is established, subsequent visits are recorded instantly, and agents can start acting on real‑time traffic.

What to Do After Activation

When you see the Active status, you can move on to the next steps:

1. Open the Seatext dashboard and navigate to the Agents tab.
2. Select the agents you want to run (e.g., Chat, SEO, Translation).
3. Configure any optional settings, such as language targets or conversion goals.
4. Save the configuration. The agents will begin processing live traffic within minutes.

If you plan to use multiple agents, enable them one at a time and monitor performance in the dashboard’s analytics view.

Site‑Wide vs. Single‑Page Activation

Placing the script in the <head> tag activates Seatext on every published page. This is the recommended approach for most businesses because it guarantees that all traffic is tracked and all agents can act wherever a visitor lands.

Using a T123 block limits activation to the page that contains the block. The script runs only on that page, so the dashboard will show Active only after a visitor lands on that specific URL. This method is useful for testing or for landing pages that need a dedicated agent without affecting the rest of the site.

Remember:

• Unpublished or draft pages cannot trigger activation.
• Low‑traffic sites may need several visits before the dashboard updates.
• Multiple domains require separate Seatext accounts, as each account is linked to a single primary URL.

Practical Edge Cases and Limitations

T123 blocks and caching. If you add the script via a T123 block, clear any CDN or browser cache after publishing. Cached pages may still serve the old HTML without the script.

Low‑traffic delays. The 5‑minute wait is a minimum. On sites with few visitors, the dashboard may take longer to show Active. You can manually trigger a check by visiting the page from a different device or network.

Multiple domains. Seatext does not support a single account covering both a staging domain (e.g., staging.example.com) and a production domain (www.example.com). Create separate accounts for each domain to avoid activation conflicts.

Unpublished pages. Draft or password‑protected pages are ignored by the activation script. Publish the page first, then run the checklist.

Security restrictions. Development URLs such as localhost or dynamic subdomains are blocked for security reasons. Use a real, publicly reachable domain when testing activation.

Frequently Asked Questions

How long does it take for Seatext to become active?

The script needs a visit of at least 40 seconds, then a wait of up to 5 minutes before the dashboard shows Active. Low‑traffic sites may need a few more visits.

Can I verify activation from a mobile device?

Yes. Open your site on any mobile browser, stay for 40 seconds, and then check the dashboard. The status is device‑agnostic.

What if the dashboard still shows “Inactive” after several attempts?

Double‑check that the entire JavaScript snippet is present in the <head> tag and that the site is published. Re‑publish the site, clear caches, and repeat the checklist.

Do I need to keep the script on every page?

If you want site‑wide agents (e.g., Chat, SEO, Translation), keep the script in the global <head>. For a single landing page, a T123 block is sufficient.

Is there any cost to check activation?

No. Checking activation only requires a free Seatext account. Enabling specific agents may have pricing, but the verification step itself is free.

What should I do after I see the “Active” badge?

Proceed to the Agents section of the dashboard, enable the agents you need, and configure any optional settings. Monitor the performance reports to ensure the agents are delivering the expected results.

Next Steps: Enabling Seatext Agents

Now that you have confirmed activation, you can start using Seatext’s AI agents. Visit the Seatext website, log in, and enable the agents that match your goals—whether it’s live chat, SEO content generation, or multilingual translation.

Remember to test each agent on a few real visitors before rolling it out to all traffic. This helps you fine‑tune settings and avoid unexpected copy changes.

If you added the Seatext script to your Tilda site but the activation isn’t happening, the problem is usually one of a few specific errors. Below is a step‑by‑step diagnosis followed by the likely causes and the corrective actions.

Symptom: The website does not show in your Seatext account

After following the integration steps, you expect to see your domain listed next to the Seatext logo. If it does not appear after a reasonable wait, check these points in order.

1. Code placed in the wrong location

Seatext requires the JavaScript snippet to be inside the <head> tag of your site. On Tilda, this is done via Site Settings → More → HTML code for the head section → Edit code 【S1】. If you paste the code into a page block (for example, the T123 block) instead of the global head, the script may load but not activate correctly. Always use the global head field for the primary installation.

Why it matters: The head tag loads before the page body. Seatext’s activation routine runs as soon as the script is parsed. Placing the code later can delay or prevent the routine from starting.

Practical tip: After pasting, open the page source (Ctrl+U) and verify the snippet appears between <head> and </head> on every page.

2. Changes not saved and published

Tilda does not apply code changes until you save and publish the site. After pasting the code in the head section, click Save, then Publish on your site. The same applies if you use the T123 block method: you must publish the page after adding the block.

Common mistake: Saving the draft but forgetting to publish. The live site still serves the old version, so Seatext never sees the script.

Check: Open the live URL in an incognito window and view the source. If the snippet is missing, the publish step failed.

3. Using a development or localhost URL

Seatext requires a valid, public domain. Localhost, staging domains with dynamic URLs, or anything that is not a published public domain will not work. Development URLs are restricted for security reasons 【S1】. If you are testing, use a live subdomain or a production‑like domain.

Decision criteria: Does the URL resolve publicly without authentication? If not, activation will fail.

Scenario: A team uses dev.example.com on a private network. The script loads, but Seatext cannot link the traffic to an account because the domain is not reachable from the internet.

4. Not waiting long enough for activation

After adding the code, you need to visit or refresh your website several times and stay on the page for at least 40 seconds. This triggers the AI to link to your account. Then wait at least five minutes for your website name to appear next to the Seatext logo 【S1】.

Mechanics: The script sends a ping after the 40‑second dwell time. The server then matches the ping to your account and updates the dashboard within five minutes.

Practical tip: Open the site in a new tab, scroll slowly, and keep the tab open for 45 seconds. Then close and reopen after five minutes to check the dashboard.

5. Using one account for multiple domains

Each Seatext account is tied to a single primary URL. If you need Seatext on more than one domain, create a separate account for each 【S1】. Trying to add a second domain to an existing account will prevent activation.

Why it matters: The activation algorithm matches one domain per account to avoid cross‑domain data leakage.

Best practice: Register a new Seatext account for each distinct domain, even if they belong to the same business.

6. Forgetting to refresh the site after adding the code

Even after publishing, the browser may serve a cached version. Visit the site in a fresh incognito tab, scroll around, and confirm the code is loaded. Without a visit, the activation process never starts.

Tip: Clear the browser cache or add a cache‑busting query string (e.g., ?v=1) to the URL when testing.

7. Missing SSL certificate or mixed‑content issues

Seatext loads over HTTPS. If your Tilda site uses HTTP or has mixed‑content warnings, the script may be blocked by the browser. Ensure your custom domain has a valid SSL certificate.

Verification: Open the site and look for a green lock icon. If the lock is missing, enable HTTPS in Tilda’s domain settings.

Impact: Browsers will refuse to execute insecure scripts, so activation never occurs.

8. Content Security Policy (CSP) blocks

Some Tilda projects add strict CSP headers. If the CSP does not allow scripts from seatext.com, the browser will block the snippet.

Solution: Add script-src https://seatext.com to your CSP header. This change is made in the “Custom HTTP headers” section of Tilda.

Limitation: If you cannot modify CSP (e.g., on a managed hosting plan), you may need to disable the policy for the script.

Key facts about Seatext activation on Tilda

Limitations and when this advice does not apply

These steps assume you have a Seatext account and the correct JavaScript snippet from your dashboard. If the script is wrong or the account is inactive, activation will not work regardless of placement. Also, if your Tilda site uses a custom domain with strict Content Security Policy headers, those headers might block the script. In that case, allow the Seatext domain in your CSP.

Unsupported scenario: Using a third‑party CDN that rewrites script URLs. Seatext must be served directly from its own domain.

Frequently asked questions

Why does my website name not appear even after 5 minutes?

Revisit the site in a private window, stay for at least 40 seconds, and check that the code is in the global head section. If it still does not appear, confirm you used the correct account and that the domain is public.

Can I use Seatext on a staging subdomain before going live?

Yes, as long as the subdomain is a real, publicly accessible URL. Create a separate account for the staging domain.

Do I need to publish the Tilda site every time I change the head code?

Yes. Tilda stores the head code per project, but changes only go live after you publish the site.

What if I accidentally paste the code in a page block first?

Remove the code from the page block. Then follow the correct method: Site Settings → More → HTML code for the head section.

Will activation work if my Tilda site is password‑protected?

No. Seatext needs to access the live, public page to activate. Password protection or IP restrictions will block the connection.

My browser shows a mixed‑content warning. What should I do?

Enable HTTPS for your custom domain in Tilda. Then republish the site so the script loads over a secure connection.

How can I verify that the script is actually running?

Open the browser console (F12) and look for a log entry that mentions “Seatext”. If you see an error about CSP or blocked content, adjust your settings accordingly.

What does Seatext activation cost on Tilda?

The base Seatext script installation on Tilda is completely free. There is no charge for copying the JavaScript code into your Tilda site's head section or a T123 block. The activation process (visiting your site and waiting 40 seconds) also costs nothing.

You will only pay if you decide to activate one of Seatext's premium AI agents (like the Conversion Agent or Google Ads Agent). Those have separate subscription pricing. The Seatext homepage and several feature pages include a "Click here for pricing" link for details.

Why activation pricing matters for Tilda users

Knowing that activation itself is free helps you budget accurately. You can launch the integration on a test site without any upfront cost. This reduces risk for small businesses and agencies that experiment with AI tools.

When you later add premium agents, you can compare the expected lift in conversions against the subscription fee. That comparison is essential for ROI calculations and for deciding whether a paid Tilda plan is justified.

Step‑by‑step integration of Seatext on Tilda

Seatext's integration guide outlines two ways to add the script:

1. Open the Tilda dashboard, go to Site Settings, then click More → HTML code for the head section → Edit code. Paste the JavaScript snippet provided by Seatext and save.
2. For a single page, add a T123 block, choose Other, open the HTML editor, paste the code, then publish.

After publishing, visit the page and stay for at least 40 seconds. This triggers the activation handshake described in Seatext's documentation.

Free vs. premium agents: how the model works

Seatext offers over 20 AI agents. Two agents are always free: the Website Chat Agent and the Authority Link Builder Agent. All other agents—Conversion Agent, Google Ads Agent, Translation Agent, Bot Refund Agent, etc.—require a paid subscription per account.

Each premium agent has its own pricing tier, which you can view by clicking the "Click here for pricing" button on Seatext's pricing page. The free agents run without any subscription, but they provide limited functionality compared to the paid suite.

Trade‑offs of using only free agents

Free agents give you basic chat support and link‑building automation. They do not rewrite landing‑page copy, translate content, or protect against ad‑click fraud. If you rely solely on free agents, you may miss out on the conversion lifts and cost‑recovery benefits that premium agents promise.

However, using only free agents lets you test the platform without any recurring cost. This is useful for proof‑of‑concept projects or for sites with very low traffic where the ROI of premium agents would be marginal.

Practical cost comparison of Tilda plans

Tilda provides three tiers: Free, Personal, and Business. All tiers allow you to add custom JavaScript, so the Seatext script works everywhere. The Free tier limits you to a Tilda subdomain and a small number of pages, which can restrict how many landing pages you can optimize with premium agents.

Personal and Business plans unlock custom domains, more pages, and higher bandwidth. If you plan to run multiple premium agents across several pages, a paid Tilda plan often becomes cost‑effective because the added domain flexibility outweighs the modest monthly fee.

Cost driver 1: Your Tilda plan

Tilda offers Free, Personal, and Business plans. The Seatext script works on all three, so you do not need to upgrade your Tilda plan just to use Seatext. However, Tilda's Free plan has limitations (like a Tilda subdomain and limited pages) that may affect how you use Seatext's features. If you need a custom domain or more pages, you need a paid Tilda plan.

Cost driver 2: Which Seatext agents you activate

Seatext offers over 20 AI agents, each with different capabilities. The list includes a Free Website Chat Agent (no cost) and premium agents like the Conversion Agent, Google Ads Agent, Translation Agent, and Bot Refund Agent. Each premium agent likely has its own subscription fee. The exact prices are not shown in Seatext's public pricing materials, but the company's reference to "Click here for pricing" suggests you can see per‑agent costs on the pricing page.

Cost driver 3: Number of websites and domains

Each Seatext account is tied to one primary URL. If you want to use Seatext on multiple Tilda sites, you need separate accounts for each domain. This could increase your total subscription cost if you activate premium agents on more than one site. Seatext's documentation explicitly states: "If you need to use SEATEXT AI on multiple domains, you must create separate accounts for each domain."

Cost driver 4: Free trial or pilot period

Seatext offers a "Free 1‑Month Pilot Trial" for the Google Ads Agent, as shown in the integration guide. Other agents may have similar trial options. This reduces your initial cost risk. After the trial, you decide whether to continue with a paid subscription.

Cost driver 5: Testing and development domains

Development URLs like localhost are restricted for security reasons. If you test on a dynamic development domain, it may not work reliably. This does not add direct cost but may require you to set up a valid real domain for testing, which can involve domain registration fees.

How to estimate your total cost

• Tilda plan: Zero to a modest monthly fee for Personal or Business tiers.
• Seatext agent subscriptions: Check the Seatext pricing page for per‑agent rates.
• Number of sites: One account per domain. Multiply agent costs if you need Seatext on multiple Tilda sites.
• Free trials: Use the 1‑month pilot to test before committing.

What you get for free

Limitations and notes

The activation cost itself is zero, but to get value from Seatext you likely need at least one premium agent. Without a premium subscription, the base script may not perform any visible action. Seatext's documentation states that after installation, you activate specific agents. If you activate none, the script remains inert. Also, you must refresh your website and stay on the page for at least 40 seconds to link the site to your account. Wait at least five minutes to see your website name appear on the Seatext dashboard.

Frequently asked questions

Is there a hidden activation fee?

No. The integration code and activation process have no cost.

Can I use Seatext on Tilda’s Free plan?

Yes. The script works on any Tilda plan. Just paste the code into the HTML head or a T123 block.

Do I need a paid Seatext subscription to start testing?

You can start with the free agents (Chat, Authority Link Builder) and use the 1‑month pilot trial for the Google Ads Agent before paying.

What if I want Seatext on two Tilda sites?

You need two separate Seatext accounts, each with its own subscription if you use premium agents.

Does Tilda charge extra for adding custom JavaScript?

No. Adding script code to the head section or T123 block is standard on all Tilda plans.

Where do I find the exact subscription prices?

Click the "Pricing" link on any Seatext page or the "Click here for pricing" buttons found on seatext.com.

Can I cancel anytime?

Seatext's documentation does not detail the cancellation policy. Check with Seatext support or the pricing page for the latest terms.

Why HEAD Placement Matters

Seatext needs to load before any content on your page. That is why the script must go in the HEAD tag. If you place it in the body, the AI may not fire correctly. Tilda provides a dedicated field for HEAD code. Go to Site Settings → More → HTML code for the head section → Edit code. Paste the script there. Do not paste it into a T123 block or any other body location. If you see the script in the body, move it to the HEAD and republish.

How the 40-Second Visit Activates the AI Link

Seatext does not activate immediately. The AI needs to see real visitor behavior. Open your live Tilda page in a browser. Refresh the page several times. Then stay on the page for at least 40 seconds. This interaction tells Seatext that your site is active. Without this step, the AI will not link to your account. If you close the page too soon, the activation may not happen. Wait at least five minutes after the visit. Then look for the Seatext logo next to your site name at the top of the page. That logo confirms activation.

Why the Domain Must Exactly Match the Account

Your Seatext account is tied to a single primary URL. If your Tilda site uses a subdomain that is different from that URL, activation will fail. For example, if your account uses example.com but your Tilda site is dev.example.com, the AI will not recognize it. You must use the exact domain that you entered when you created the Seatext account. Check your account settings to see the primary URL. If you need to change it, update the domain in your Seatext dashboard. Then republish your Tilda site.

How to Confirm in the Seatext Dashboard

After activation, open your Seatext dashboard. Look for the site name in the list of connected sites. If you see your domain listed with a green status, activation was successful. If the site is missing or shows an error, go back to the previous steps. You can also check the dashboard logs. They may show why the script did not connect. If you are unsure, take a screenshot of your Tilda HEAD code section and the dashboard view. This helps support teams diagnose faster.

Limitations: Localhost, Dynamic Subdomains, and Separate Accounts

Seatext does not work on localhost or development URLs. These are restricted for security. You must use a real, public domain. Dynamic subdomains, like those created by Tilda for testing, may also fail. The AI cannot reliably associate traffic with such URLs. If you need to test, use a production domain. Also, each Seatext account is linked to one domain. To use Seatext on multiple Tilda sites, you need a separate account for each. Do not share a single account across domains.

Diagnostic Sequence: Step-by-Step Checks

1. Check the HEAD code location. If you find the script in the body, move it to the HEAD tag in Tilda Site Settings. Then save and publish.
2. Verify the domain matches your Seatext account. If it does not, update the account or republish the site to the correct domain.
3. Trigger activation by visiting the live page. Refresh several times and stay for 40 seconds. If you closed early, do it again.
4. Wait five minutes. If the Seatext logo does not appear, go to the next step.
5. Check the Seatext dashboard. If the site is not connected, review the HEAD code and domain. If everything looks correct, take a screenshot and escalate.
6. Contact Tilda support with the screenshot. Include the HEAD code section and the domain you are using. They can help verify the setup.

Follow-Up Scenarios: Caching, Script Conflicts, and DNS Changes

Sometimes activation seems to fail because of caching. Your browser may show an old version of the page. Clear your browser cache and try again. Tilda also has a caching layer. Republish the site to flush the cache. Script conflicts are another issue. If you have other JavaScript on the page, it may block Seatext. Test on a clean page or disable other scripts temporarily. DNS changes can also delay activation. If you recently changed your domain, propagation may take up to 48 hours. Wait and then revisit the page. If none of these work, the issue may be on Tilda’s side. Tilda support can investigate.

Verdict: Seatext Activation Needs a Verification Step

When you add a tool like Google Analytics, Facebook Pixel, or a live chat widget to Tilda, you usually paste a code snippet into the HEAD tag, save, and the tool starts working instantly. Seatext is different. After pasting the JavaScript code, you must visit or refresh your website, stay on the page for at least 40 seconds, and wait up to five minutes for the website name to appear in your Seatext dashboard. This extra step verifies ownership and links the AI to your account.

This difference exists because Seatext needs to confirm that the code is placed on a live, accessible domain before it activates its AI agents. The activation is a one‑time process, not a recurring delay.

Comparison: Seatext Activation vs. Typical Tilda Integrations

Who Should Choose Each Option

Choose Seatext if…

• You want AI agents that rewrite content, match ads, translate, and optimize in real time – not just static embed codes.
• You're okay with a one‑time verification step in exchange for advanced functionality.
• You manage a single domain or are willing to create separate accounts for multiple sites.

Choose other Tilda integrations if…

• You need a simple, instant setup for analytics, chat, or pixels.
• You don't want to wait for activation or manage separate accounts for each domain.
• Your integration needs are basic (e.g., tracking visitors, adding a chat widget).

How Seatext Activation Works on Tilda (Step by Step)

Based on the official Seatext Tilda integration guide, here's the exact process:

1. Copy the JavaScript code from your Seatext account dashboard.
2. Go to Tilda site settings → More → HTML code for the head section → Edit code.
3. Paste the code into the field labeled 'Edit code inside HEAD tag' and save. Alternatively, for a single page, add a T123 block and paste the code there.
4. Publish your site.
5. Visit or refresh your website in a browser and stay on the page for at least 40 seconds. This activates the AI and links it to your account.
6. Wait up to five minutes until you see your website name next to the Seatext logo in your dashboard. That confirms the connection is ready.

If you need to use Seatext on multiple domains, you must create a separate account for each one. Development domains (like localhost) are restricted.

During the waiting period, the script does not modify any page content. It only signals to Seatext's servers that the snippet is reachable on a real domain. Once the dashboard shows the domain name, the AI agents become active and can start rewriting copy, translating pages, or matching ad keywords in real time.

What Happens After Activation

After the domain appears in the dashboard, Seatext unlocks a set of autonomous AI agents. Each agent runs in the browser and can modify the DOM without a page reload. For example, the Google Ads Intent Matching agent reads the URL query, detects the ad keyword, and swaps headlines, offers, and CTAs to match that keyword. The Translation agent can render the same page in any of 125 supported languages, pulling translations from Seatext's cloud model.

The activation workflow is one‑time per domain. Once the AI is linked, any subsequent page view automatically triggers the agents. You do not need to repeat the 40‑second visit unless you replace the script with a new snippet from a different account.

This design protects site owners. The script stays inert until the verification step confirms ownership, preventing accidental activation on staging or test sites. It also ensures that the AI only runs on domains you have explicitly approved, reducing the risk of unwanted content changes.

Common Activation Mistakes

• Not publishing the site after adding the code – The script is invisible to visitors until the page is live.
• Using a development domain such as localhost or a temporary staging URL – Seatext restricts these URLs for security reasons (see source S1).
• Checking the wrong dashboard or looking for the domain name in a different section – The domain appears next to the Seatext logo at the top of the main dashboard after the five‑minute window.
• Skipping the 40‑second stay on the page – The AI only registers a visit that lasts at least 40 seconds, as required by the integration guide.

Key Facts About Seatext Integration

Limitations of Seatext Activation

• One account per domain – If you run multiple Tilda sites, you need multiple Seatext subscriptions. This differs from tools like Google Analytics, which can track many sites under one account.
• Activation delay – The 40‑second visit and up to five‑minute wait can feel slower than instant embed codes. However, it is a one‑time step.
• No development domain support – Localhost and dynamic staging URLs are restricted. Use a real, published domain for each environment.
• Requires a fresh visit – The AI only activates after a real visitor loads the page post‑install. If no one visits, the script stays dormant.

Frequently Asked Questions

Why does Seatext need a verification step when other tools don't?

Seatext's AI agents actively rewrite content and track visitor behavior. The verification ensures the code is on a legitimate domain and that you own it. Other tools (like analytics) only collect data passively, so they do not require the same check.

Can I use Seatext on a staging or development Tilda site?

No. Seatext restricts development URLs such as localhost or dynamic staging domains for security reasons. You must use a real, published domain. If you have a separate staging domain, create a separate Seatext account for it.

How long does the activation actually take?

After pasting the code and publishing, you need to visit the site and stay for at least 40 seconds. Then wait up to five minutes for the website name to appear in your dashboard. In practice, activation often completes faster, but plan for the full window.

What if I forget to refresh the site after adding the code?

Nothing happens. The AI remains inert until someone visits the site. You can always return later, refresh the page, and stay for 40 seconds to trigger activation.

Do I need to repeat the activation process if I update the code?

Activation is linked to the domain and the specific snippet. If you replace the snippet with a new one from a different Seatext account, you must repeat the verification step for the new code.

Can I use Seatext together with other Tilda integrations?

Yes. Seatext is added as a JavaScript snippet in the HEAD tag or via a T123 block, so it can coexist with other embed codes when you follow the official install steps.

What does it cost?

Pricing details are available on the Seatext website. The integration does not add extra fees; you only pay for the Seatext subscription as listed on the pricing page.

Why Activation Speed Matters for Seatext on Tilda

Seatext activates only after it detects real visitor traffic on your domain. The faster you trigger that detection, the sooner you can deploy AI agents that rewrite headlines, translate content, or optimize conversions. Delays often come from simple setup errors, not platform limits. Understanding the mechanics helps you avoid wasted time.

Prerequisites for a Fast Activation

Before you start, you need a verified domain. Seatext links each account to a single primary URL. Localhost, staging subdomains, or dynamic development URLs are restricted for security reasons. The domain must be publicly accessible and resolve to your Tilda site. You also need an active Seatext account. Create one at seatext.com if you haven't yet. Without these two items, activation will not proceed.

Step 1: Copy the Seatext JavaScript Code

Log in to your Seatext dashboard. Navigate to the integration section for Tilda. Copy the JavaScript snippet exactly as shown. The code is identical for every site; the only variable is where you paste it on Tilda. Do not modify the snippet. Any change can break the activation handshake.

Step 2: Add the Code to Your Tilda Site (Two Methods)

You have two placement options. Choose one.

Method A: Site-wide HEAD tag (recommended)

1. Open your Tilda dashboard.
2. Go to Site Settings → More → HTML code for the head section → Edit code.
3. Paste the Seatext JavaScript into the field labeled "Edit code inside HEAD tag".
4. Save and publish the entire site.

This method loads the script on every page automatically. It ensures activation can trigger from any entry point.

Method B: Per-page T123 block

1. Open the specific page in the Tilda editor.
2. Click the "+" icon to add a new block.
3. Choose block T123, then select "Other".
4. Click "Content" to open the HTML editor.
5. Paste the Seatext JavaScript.
6. Save and close the block, then publish the page.

Use this method only if you need Seatext on a single landing page. You must repeat the block on every page where you want activation possible.

Step 3: Publish and Trigger Activation by Visiting Your Site

After publishing, open your live site in a browser. The script is inert until it records a visit. To trigger activation:

1. Visit the homepage (or the page with the T123 block).
2. Refresh the page several times.
3. Stay on the page for at least 40 seconds per visit.

Each visit sends a signal to Seatext servers. The 40-second threshold ensures the system registers a genuine session, not a bot ping. Multiple refreshes increase the chance that the signal is processed quickly.

Step 4: Verify Activation in Your Seatext Dashboard

Wait at least five minutes after your last visit. Return to your Seatext dashboard. Look at the top of the page next to the SEATEXT logo. Your website name should appear there. That confirms the domain is linked and agents are ready to deploy. If the name is absent, re-check the steps below.

Common Mistakes That Slow Down Activation (with Concrete Examples)

• Using a development domain: A user pastes the code on a Tilda subdomain like project123.tilda.ws but the Seatext account is registered to example.com. Activation fails because the domain mismatch blocks the handshake.
• Skipping the visit step: A user publishes the code but never opens the live site. The script never fires, so Seatext never receives the activation signal.
• Leaving the page too early: A user visits, waits 10 seconds, then closes the tab. The 40-second minimum is not met, so the session is discarded.
• Placing code in the wrong Tilda field: Pasting into "HTML code for the body section" instead of "HEAD tag" causes the script to load after page render, which can delay or prevent detection.
• Using one account for multiple domains: A user tries to activate both siteA.com and siteB.com under the same Seatext account. Each domain requires its own account.

How Seatext Activation Works Under the Hood

When the JavaScript loads, it creates a lightweight listener. On each page view, it sends a fingerprint (domain, timestamp, session ID) to Seatext's activation endpoint. The server matches the fingerprint to your account's registered primary URL. If they match and the session lasts 40+ seconds, the server marks the domain as active. The five-minute verification window accounts for queue processing and cache propagation. The script remains dormant until activation completes, so it adds zero perceptible load to your Tilda pages.

Key Facts for Seatext on Tilda

FAQ: Seatext Activation on Tilda

Why does activation take up to 5 minutes?

After your visit, Seatext's backend queues the activation request. It validates the domain match, checks session duration, and propagates the status to your dashboard. This usually finishes within 5 minutes.

Can I use the same code on multiple Tilda pages?

Yes. If you paste the code in the site-wide HEAD tag, it runs on all pages automatically. For per-page placement, you must add a T123 block on each page individually.

What if I don't see my website name after 5 minutes?

First, confirm you used a verified domain that matches your Seatext account. Second, verify the code is in the HEAD section (not body). Third, ensure you visited the live site and stayed 40+ seconds. Fourth, clear browser cache and revisit. If still missing, contact Seatext support with your account email and domain.

Does Seatext work on Tilda's free plan?

Yes. Tilda's free plan allows custom HTML in the HEAD section and T123 blocks. No paid Tilda tier is required.

Will activating Seatext slow down my Tilda site?

No. The script is under 2 KB gzipped. It executes asynchronously and does nothing until activation completes. Page load metrics remain unchanged.

Can I speed up activation by visiting the page multiple times?

Yes. Multiple visits with 40-second stays increase the probability that the activation signal is processed in the first queue cycle. Combine refreshes with the time requirement for best results.

What happens if I change my domain later?

Seatext ties each account to one primary URL. Changing domains requires creating a new Seatext account and repeating the integration steps.

Can I activate Seatext on a password-protected Tilda page?

No. The activation endpoint must be reachable without authentication. Password protection blocks the handshake.

Overview

Seatext adds autonomous AI agents to a Tilda site to improve conversion, recover ad spend, translate content, and more. The integration process consists of creating an account, inserting a JavaScript snippet, publishing the site, and activating the AI. This guide explains each step and the time required.

Prerequisites

You need a valid Seatext account linked to a single published domain. You must have access to your Tilda dashboard to edit site settings or add blocks. The site must be live; localhost or development URLs are not supported. Set aside about one to two hours of uninterrupted time for the setup.

Step 1: Create Your Seatext Account

Go to seatext.com and sign up. Provide your Tilda site URL as the primary domain. Each Seatext account works with only one domain; if you have multiple Tilda sites, create separate accounts.

Step 2: Get the JavaScript Code

After logging in, locate the integration code snippet in your account dashboard. Copy the code; it is unique to your account and domain.

Step 3: Add the Code to Tilda

You can install the code site‑wide or on specific pages.

Option A: Site‑wide installation

1. In Tilda, choose More → HTML code for the head section → Edit code.
2. Paste the Seatext JavaScript into the field labeled ‘Edit code inside HEAD tag’.
3. Save and publish the site.

Option B: Per‑page installation

1. Open the page you want to translate in the Tilda dashboard.
2. Click the ‘+’ icon to add a new block.
3. Select the T123 block under “Other”.
4. Open the block’s Content editor.
5. Paste the Seatext snippet, click Save and Close, then Publish.
6. Repeat for each page where you need the AI.

Site‑wide installation adds the code to every page via the head tag. Per‑page installation requires the T123 block on each target page.

Step 4: Publish and Activate the AI

After publishing the site with the code, the AI remains inert until you trigger it.

1. Visit your published Tilda site several times from a browser.
2. Stay on the page for at least 40 seconds each visit.
3. Wait at least five minutes after your first visit.
4. Refresh your Seatext dashboard; your site name should appear next to the Seatext logo, confirming the link.

Once linked, you can activate any of the available agents from the dashboard.

Verification and Troubleshooting

To confirm the script runs, open browser developer tools (F12) and check the network tab for the Seatext request. You can also observe agent activity, such as rewritten headlines or translated content, directly on the page.

Common issues include using a development URL, not visiting the site after adding the code, placing the script outside the head tag or T123 block, and trying to use one account for multiple domains. Each of these prevents activation.

AI Agents Available After Activation

Seatext provides over 20 autonomous agents that can be turned on with one click.

• Conversion Agent: adapts landing page copy to match each Google Ads keyword, promising up to +25% conversion rate.
• Translation Agent: translates pages into 125 languages, offering up to +60% more international customers.
• Bot Refund Agent: detects invalid clicks and can recover up to 20% of ad spend from Google and Meta.
• Google Ads Agent: aligns page content with ad keywords, delivering up to +35% more conversions.
• AI SEO Agent: generates crawlable Q&A pages for long‑tail traffic, contributing to additional conversions.
• Ecommerce Agent: optimizes product names, descriptions, and CTAs, claiming up to +40% more conversions.
• ChatGPT Influence Agent: shapes how AI assistants describe your brand, aiming to reach the 52% of buyers who compare brands in ChatGPT.

All agents work in real time without manual updates.

Frequently Asked Questions

How long does the whole process take?

Account creation and code insertion need about one to two hours. Activation requires visiting the site and waiting at least five minutes after publishing.

Do I need coding skills?

No. You only copy and paste the JavaScript snippet provided by Seatext.

Can I use Seatext on a Tilda subdomain?

Yes, if the subdomain is a real, published URL. Each subdomain counts as a separate domain, so a separate Seatext account is required.

What if I do not see my site name in the dashboard after waiting?

Verify that the site is published, the code is correctly placed in the head tag or T123 block, and you are not using a development URL. Then revisit the site and stay for at least 40 seconds before checking again.

Can I install Seatext on only one page?

Yes. Use the T123 block method for that page and repeat the process for any additional pages where you want the AI active.

Is Seatext compatible with Tilda’s mobile version?

Yes. The script runs on any page where it is inserted, including mobile views. For AMP pages, consult Tilda’s AMP‑specific documentation.

Follow the setup instructions precisely, use a valid HTTPS domain, and test activation by visiting your site and waiting for the AI to link to your account.

What You Need Before You Start

Before you add the Seatext code to your Tilda site, make sure you have:

• A Seatext AI account. If you don't have one, create it at seatext.com.
• A valid, real HTTPS domain (not localhost or a dynamic development URL).
• Access to your Tilda dashboard with edit permissions for the site or page.

Two Ways to Install Seatext on Tilda

You can add the Seatext JavaScript code using either a site-wide method (applies to all pages) or a per-page method (for specific pages). The site-wide method is simpler and recommended for most users.

Step-by-Step: Site-Wide Installation (All Pages)

This method inserts the code into the <head> section of every page on your Tilda site.

1. Copy the JavaScript code from your Seatext account dashboard. It appears in the integration section.
2. Go to your Tilda dashboard and open the site settings.
3. Click on More → HTML code for the head section → Edit code.
4. Paste the code into the field labeled 'Edit code inside HEAD tag'.
5. Save and publish your site.

Step-by-Step: Per-Page Installation (Specific Pages Only)

Use this method if you only want Seatext on certain pages, or if you need to test on a single page first.

1. Access your Tilda dashboard and navigate to the page you want to translate.
2. Click the '+' icon to add a new block. Choose the block named T123 from the 'Other' category.
3. Click on 'Content' to open the HTML editor.
4. Paste the Seatext code snippet into the editor. Then click 'Save and Close'.
5. Click 'Publish' to make the changes live.

How to Verify That Activation Is Working

After adding the code, you need to trigger the activation:

1. Visit your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your account.
2. Wait at least five minutes. Then check your Seatext dashboard. Your website name should appear next to the Seatext logo at the top of the page. This confirms the connection is live.
3. If you don't see the website name, repeat the visits and waiting. Make sure you used the correct domain and that the code is placed correctly.

Why the 40-Second Visit Matters

The 40-second requirement is not arbitrary. Seatext uses that window to confirm that a real human is browsing the page. The script sends a signal to the Seatext backend only after it detects sustained activity. This prevents accidental activation from bots or brief visits. If you leave the page too early, the signal may not fire and the account linking will not complete.

How Seatext Associates Traffic with Your Account

When the script loads, it reads the current domain and sends a ping to Seatext servers. The backend matches that domain to the account that owns the script. If the domain matches the one registered in your Seatext account, the connection is recorded. This is why you must use the exact same HTTPS domain in both places. Any mismatch — such as a missing "www" or a different subdomain — will break the association.

What to Do If Your Domain Is Not Recognized

If the dashboard does not show your site name after the waiting period, follow these steps:

• Verify that the domain in your Seatext account matches the live URL exactly, including protocol (HTTPS) and subdomain.
• Clear your browser cache and any server-side cache (CDN, Tilda cache) then revisit the page for another 40 seconds.
• Check the browser developer console for JavaScript errors that might block the script.
• Try the per-page installation method on a single page to isolate the issue.
• If the problem persists, contact Seatext support with your account email and the domain.

Practical Troubleshooting Steps

Use this checklist when activation fails:

1. Confirm the script is present in the page source (view source and search for the Seatext snippet).
2. Ensure you clicked "Publish" in Tilda after adding the code.
3. Test in an incognito window to rule out browser extensions.
4. Wait the full 5 minutes after the 40-second visit before checking the dashboard.
5. If you have multiple domains, confirm each has its own Seatext account.

Expert Perspective: Most Common Tilda Activation Failure

Practitioner tip: The most common failure is forgetting to publish after pasting the code. Tilda changes are not live until you hit Publish. Also, using a staging subdomain that changes on each deploy breaks the link because Seatext expects a stable domain. Always use a fixed HTTPS domain for activation.

Common Mistakes and How to Avoid Them

• Using a localhost or dynamic domain: Seatext restricts these for security. Use a real, public HTTPS domain.
• Not waiting long enough: The activation requires at least 40 seconds of page visit time and up to 5 minutes for the dashboard to update. Be patient.
• Forgetting to publish after adding code: Changes on Tilda only go live after you click 'Publish'. Always publish after pasting the code.
• Using the same account for multiple domains: Each domain needs its own Seatext account. Create separate accounts if you have a development and production domain.

Key Facts About Seatext Activation on Tilda

Limitations and When This Advice May Not Apply

This guide assumes you are using a standard Tilda website with a custom domain. If you are on a Tilda subdomain (e.g., yoursite.tilda.ws), the process still works, but make sure you use that exact domain in your Seatext account. If your site uses a content delivery network or aggressive caching, you may need to clear the cache after adding the code. Development environments that use dynamic URLs (like those from local development tools) are not supported by Seatext.

Frequently Asked Questions

Why does activation take up to 5 minutes?

Seatext needs to scan your site and associate the traffic with your account. The 5-minute window ensures the system has enough data to confirm the connection.

Can I use the same Seatext account for my test site and live site?

No. Each domain (including test and live) needs its own Seatext account. Create separate accounts to avoid conflicts.

What if I see an error after pasting the code?

Double-check that you copied the exact code from your Seatext dashboard. Ensure there are no extra spaces or missing characters. Also verify that the code is placed in the correct location (HEAD tag for site-wide, T123 block for per-page).

Does Seatext work on a Tilda Free plan?

Check with the vendor for details on Free plan compatibility.

How do I remove Seatext from my Tilda site?

Simply delete the code from the HEAD tag or remove the T123 block. Then publish the site. The AI will stop running.

Will Seatext slow down my Tilda site?

Check with the vendor for performance impact details.

How Seatext activation works on Tilda

Seatext installs as a single JavaScript snippet pasted into the HEAD tag of your Tilda site. You can add it globally via Site Settings → “Edit code inside HEAD tag” or on a single page using a T123 “Other” block. After saving and publishing, you must visit the live page, stay for at least 40 seconds, then wait roughly five minutes until your site name appears next to the Seatext logo in the dashboard. That handshake confirms the AI is linked to your account and ready to run.

Benefits of quick activation

Activating Seatext on Tilda right away gives you five immediate advantages. First, you get earlier conversion lift. The Conversion Agent starts testing headlines and CTAs on live traffic. Second, you recover ad spend faster. The Bot Refund Agent begins flagging invalid clicks from day one. Third, you reach international visitors sooner. The Translation Agent serves pages in 125 languages. Fourth, you shape your brand in ChatGPT earlier. The ChatGPT Visibility Agent influences the 52% of buyers who compare brands in AI assistants. Fifth, you start collecting A/B test data sooner. The CRO Testing Agent needs traffic volume to declare winners. The sooner it runs, the faster you scale winning copy. Every hour of delay means lost data and missed conversions.

These benefits compound over time. Quick activation is not just about speed. It is about maximizing the return from every visitor who lands on your Tilda site.

Why activation speed changes the outcome

The AI agents do not retroactively optimize past traffic. They begin reading visitor behavior, testing variants, and rewriting content only after the connection is confirmed. Every hour you delay activation is an hour of lost data for A/B testing, missed keyword‑matched landing pages for paid clicks, and unconverted visitors who saw generic copy instead of personalized headlines.

The Tilda-specific activation checklist

1. Create a Seatext account (one per domain).
2. Copy the JavaScript snippet from the Seatext dashboard.
3. In Tilda, open Site Settings → “Edit code inside HEAD tag” and paste the snippet. Save and publish the entire site.
4. Visit the live homepage, scroll, and stay at least 40 seconds.
5. Return to the Seatext dashboard; wait up to five minutes for the site name to appear beside the logo.
6. Activate the agents you need (Google Ads, Bot Refund, Translation, etc.) with one click each.

This checklist is the fastest path to activation. Skipping any step breaks the handshake and delays the benefits.

What the five-minute wait actually does

During that window Seatext verifies the domain, confirms the script loads on every page, and establishes a secure websocket for real‑time variant delivery. The AI remains inert until this handshake finishes, so no content changes occur prematurely. Skipping the 40‑second visit or publishing only a draft version breaks the handshake and delays activation.

Common activation mistakes that slow you down

• Pasting the code into a page‑level block but forgetting to publish the whole site.
• Using a localhost or staging subdomain — Seatext blocks development URLs for security.
• Creating one account for multiple domains; each domain needs its own account.
• Closing the tab before the 40‑second mark, which prevents the activation ping.
• Not waiting the full five minutes before assuming the agent toggles will work.

Quick activation vs. delayed activation: the real difference

Consider two Tilda sites with the same traffic. Site A activates Seatext within minutes of setup. Site B waits three days. In those three days, Site A collects data on hundreds of visitors. Its Conversion Agent runs tests and finds a headline that lifts conversions by 10%. Site B has no data. Its visitors see generic copy. Site A also starts flagging bot clicks. It recovers 20% of ad spend by the end of the week. Site B has no refund evidence. The gap widens over time. After one month, Site A has optimized all landing pages, translated top pages into five languages, and built a ChatGPT presence. Site B is just starting.

Delayed activation is not neutral. It is a missed opportunity. Every hour without active AI is an hour of untested copy, unrefunded bot clicks, and untranslated pages.

Your first 30 days with Seatext on Tilda

Day 1: Activate the script and complete the 40-second visit. Within five minutes, the connection is live. Enable the Conversion Agent, Bot Refund Agent, and Google Ads Agent. They start working immediately.

Day 7: The Conversion Agent has tested 10+ headline variants. The Google Ads Agent has rewritten landing pages for top keywords. The Bot Refund Agent has identified suspicious sessions. You see the first refund report.

Day 14: Translation Agent is active. International visitors see pages in their language. ChatGPT Visibility Agent begins influencing AI answers. A/B tests show a clear winner.

Day 30: Conversion rate has improved by 15-25% on tested pages. Bot refund claims are submitted. Ad spend recovery is underway. Your site now adapts to every visitor source.

This timeline assumes quick activation. If you delay, these milestones shift later.

Expert tip: Why the 40-second visit and five-minute handshake determine real-world results

“The 40-second visit is not a technicality. It is the moment the AI learns your site structure and starts building its model. If you skip it, the handshake never completes. The five-minute wait is the verification window. During that time, we check that the script loads on every page and that the websocket is stable. Without these two steps, the AI stays inert. I’ve seen teams waste days because they left the tab too early. The most successful clients treat activation as a deliberate process: paste, visit, wait, then activate agents.”

Additional Tilda-specific troubleshooting scenarios

• Script not appearing in page source: If you paste the code into a T123 block, make sure you selected “Other” not “HTML code” block. T123 blocks work only if you choose the correct block type.
• Multiple Tilda pages not activating: If you paste the code only on one page, the global connection may not recognize other pages. Always use the global HEAD tag for full site activation.
• Domain not verified after 10 minutes: Check that you published the site after saving the HEAD code. Tilda saves but does not auto-publish. Also ensure you are visiting the live domain, not the staging preview link.
• Account mismatch: If you have multiple Seatext accounts, ensure you are logged into the correct one when checking the dashboard. The site name appears only under the account that owns the snippet.
• Ad blockers interfering: Some ad blockers can block the Seatext script. Disable ad blockers on the Tilda site during activation. Once verified, the script functions normally.

Key facts

When quick activation doesn’t help

If your Tilda site receives near‑zero traffic, the agents have no data to optimize. Activation speed only matters when real visitors — organic, paid, or referral — are arriving. Similarly, if you have not yet set up Google Ads campaigns, the Google Ads Agent has no keywords to match. In those cases, prioritize traffic acquisition first, then activate Seatext to amplify what you already have.

FAQ

How long until I see conversion improvements?

Most accounts see measurable lift within 2–4 weeks as A/B tests reach statistical significance. The Google Ads Agent can improve Quality Scores on the first paid click after activation.

Can I activate on a Tilda staging subdomain first?

No. Seatext blocks localhost and dynamic development domains. Use a real production domain or a permanent staging domain you control.

Do I need to re‑activate after a Tilda redesign?

Only if you remove the HEAD‑tag snippet. As long as the JavaScript remains in the global head code, agents survive template changes.

What if I manage multiple Tilda sites?

Create a separate Seatext account for each domain. The dashboard lets you switch between accounts, but each account tracks one primary URL.

Is there a cost to activate the agents?

Activating the script is free. Individual agents are enabled from the dashboard; pricing varies by agent and volume. Start with the free Chat Agent and add paid agents as needed.

How do I know the Bot Refund Agent is working?

After activation, the dashboard shows a “Bot Refund” report tab. It populates once paid traffic arrives and suspicious sessions are detected.

What if I forget to visit the page after pasting the code?

Without the 40-second visit, the activation handshake never completes. The AI will not be linked to your account. Simply visit the live page, stay for 40 seconds, and wait up to five minutes. You do not need to re-paste the code.

How Seatext Activation Works on Tilda

To activate Seatext on Tilda, you first copy the JavaScript snippet from your Seatext account. Then you have two installation options. For a global installation, go to Site Settings, click More → HTML code for the head section → Edit code, and paste the code into the field labeled 'Edit code inside HEAD tag'. For a single page, add a T123 block: click the "+" icon, choose T123 under Other, click Content, paste the code into the HTML editor, save and close, then publish the page. After you save and publish, the script is live on your site. The AI remains inert until a real visitor lands on a page and stays for at least 40 seconds. That first qualifying visit triggers activation. Within about five minutes, your Seatext dashboard will display the website name next to the Seatext logo, confirming the connection. At that point you can activate the specific agents you need, such as the Conversion Agent or Google Ads Agent.

Why the 40-Second Trigger and Five-Minute Dashboard Connection Matter

The 40-second threshold ensures that the AI activates only when a genuine visitor engages with your content. This prevents accidental activation from bots or brief clicks. The five-minute dashboard delay gives the system time to register the domain and link it to your account. Both steps are automatic and require no manual approval. This design means you can install the code, visit your own site, wait 40 seconds, and see the connection in the dashboard within minutes. You do not need to contact support or fill out forms.

Page-Level vs Global Installation

Global installation places the script in the head of every page on your Tilda site. This is ideal when you want all pages to be covered by Seatext agents. Page-level installation uses a T123 block on a specific page. This is useful for testing on a single landing page or for pages that need different agent configurations. Both methods follow the same activation process: the script runs, a visitor stays 40 seconds, and the dashboard connects within five minutes. Choose global installation for site-wide coverage; choose page-level for targeted experiments.

Practical Use Cases for Fast Activation

Fast activation is valuable when you need to launch a campaign today. For example, a seasonal promotion can be live within the same work session. Agencies managing multiple Tilda sites can set up Seatext on each domain quickly, though each domain requires its own Seatext account. A/B testing teams can install the script, activate agents, and start collecting data without waiting days for vendor approval. Product launches benefit because you can verify the AI is working before you drive paid traffic.

Limitations and When This Advice Does Not Apply

Seatext's fast activation assumes you have a valid, public domain. Development URLs such as localhost are restricted for security reasons. If you need to use multiple domains, you must create a separate Seatext account for each one. Activation also requires a real visitor to stay on the page for at least 40 seconds; if your site receives no traffic immediately, activation will be delayed until the first qualifying visit. This article compares activation time only; other factors like feature set, pricing, and support may differ across tools.

Choosing Between Seatext and Manual-Approval Tools

Choose Seatext when you need same-day activation and want full control over when the AI goes live. Choose a manual-approval tool only if you can wait several days for a review queue or if that tool offers a specific feature Seatext does not provide. Competitor timing estimates are based on reported workflows from user reviews and vendor documentation; actual times may vary.

Key Facts about Seatext Activation

Frequently Asked Questions

How long does Seatext take to activate on Tilda exactly?

After you paste the code and publish the site, activation happens the first time a visitor stays on a page for at least 40 seconds. The dashboard typically shows the connection within five minutes.

Do I need to wait for Seatext support to approve my site?

No. Activation is automatic once the script runs on your site. There is no manual approval step.

Can I activate Seatext on a development domain?

No. Development URLs like localhost are restricted. You must use a real, valid domain.

What if I don't get any visitors to my Tilda site?

Activation requires a real visitor. If your site has no traffic, you can visit it yourself or use a fresh browser session to trigger the activation.

Does Seatext activation time change if I use a T123 block instead of the global HEAD code?

No. Both methods work the same way. The script runs on the page, and activation follows the same process.

How does Seatext compare to other AI tools on Tilda for activation speed?

Most manual-approval tools require a review or approval step, which can take 1–3 days. Seatext activates in minutes, making it one of the fastest options available.