See how this page can help with your next step.
Direct Answer: No, SeaText AI does not provide a dedicated WordPress plugin. The official integration method is a JavaScript snippet you add sitewide. On WP Engine, SeaText recommends using the WP Engine plugin to inject that snippet. For all other hosts, you paste the code into your theme or a code-snippet tool.
No — SeaText AI does not currently offer a dedicated WordPress plugin in its official integration documentation. The standard SeaText install is a JavaScript snippet. You copy that snippet, add it to your site, and the AI activates once your page loads.
If your WordPress site runs on WP Engine, SeaText gives one plugin-related instruction: use the WP Engine plugin that lets you add custom JavaScript across your pages. That plugin comes from WP Engine, not from SeaText. For any other WordPress host, the SeaText docs describe the same JavaScript integration.
SeaText AI uses a JavaScript code integration. The official General Integration page says: “Copy the JavaScript code provided by SEATEXT AI, which can be found in the section below.” That code is the product.
The same page says the installation process is secure and the AI remains inert until activated. So pasting the code alone does not start rewriting your site. You control when the agents begin working.
A plugin and a snippet feel different in WordPress. A plugin is something you install, update, and often configure in the WordPress admin area. A JavaScript snippet is code you paste into your theme, a custom-code area, or a host tool that injects scripts. SeaText fits the second group.
This distinction changes your install checklist. You won’t look for a SeaText plugin in the WordPress plugin menu. You’ll look for a place to add code that runs on every page. You also won’t get automatic plugin updates. If SeaText changes the snippet, you must replace it manually.
On the plus side, a snippet works on any host that allows custom JavaScript. You are not locked into a specific WordPress version or plugin compatibility matrix. The trade-off is that you own the injection method.
SeaText’s integration page mentions one plugin by name: the WP Engine plugin. The instruction is direct. “If you are using WPEngine please download the WP Engine plugin that enables you to add custom JavaScript code to your pages. Install it and apply it across all your pages.”
That plugin is a host utility. It gives you a place to paste custom JavaScript. It is not a SeaText plugin with SeaText branding or settings. Once it is installed across all pages, you paste the SeaText snippet into it.
Before you paste anything, check these rules from the official integration page.
This matters if you think one account will cover staging, production, and a client site. The official docs say it won’t.
After adding the snippet, the most common concern is that nothing seems connected. The official docs give a clear activation check.
Don’t expect the AI to do anything visible until you activate agents. Activation in the Main AI Hub is the step that turns the snippet from inert code into an active tool.
“Most AI optimization tools ship as a JavaScript snippet rather than a WordPress plugin because it decouples the AI engine from the CMS release cycle,” says a WordPress performance consultant who has integrated similar tools for e-commerce clients. “A plugin requires maintenance for every WordPress core update, PHP version bump, and conflict with caching or security plugins. A snippet just runs in the browser. The downside is you lose the familiar admin UI — no settings panel, no one-click deactivate, no automatic updates. You also need a reliable way to inject the script on every page, which varies by host and theme. For agencies managing dozens of sites, a snippet is actually easier to deploy via a tag manager or a must-use plugin, but solo site owners often expect a plugin and get stuck at the injection step.”
Reach out to SeaText support if:
Support can verify whether the snippet is firing and whether the domain association is working.
The biggest limitation is that there is no one-click SeaText plugin to install from a plugin directory. You are managing a code snippet, which means you need a way to inject that code into every page of your WordPress site.
This advice applies to the standard SeaText integration described on the official page. If SeaText later releases a dedicated WordPress plugin, use that product’s own documentation instead. For now, plan around the JavaScript snippet.
Also remember the domain restrictions. Staging, production, and separate client sites each need their own SeaText account. If you ignore that, the AI may not associate traffic with the correct account.
| Aspect | Detail |
|---|---|
| Official installation method | JavaScript snippet copied from the General Integration page |
| Dedicated SeaText WordPress plugin | Not mentioned in the official integration page |
| WP Engine | Use the WP Engine plugin to add custom JavaScript sitewide |
| Account needed | Yes, before installing the script |
| Primary URL per account | One account is linked to a single primary URL |
| Multiple websites or domains | Create separate accounts for each |
| Development URLs like localhost | Restricted for security reasons |
| Activation trigger | Visit or refresh several times and stay at least 40 seconds |
The official SeaText integration docs don’t name a SeaText WordPress plugin. They describe a JavaScript snippet. On WP Engine, SeaText points to the WP Engine plugin for adding custom JavaScript.
Create a SeaText account, copy the JavaScript code from the General Integration page, and add it sitewide. On WP Engine, use the WP Engine plugin. On other hosts, use your theme’s custom-code area or a code-snippet tool.
Yes. The official instruction says: “Before you can install the script, you need a SEATEXT AI account.” You can create one from the integration page.
No. Each SeaText account is linked to a single primary URL. Create separate accounts for development and production domains.
Wait at least five minutes, visit or refresh the site several times, and stay on the page for 40 seconds. If it still doesn’t appear after 10 minutes, contact SeaText support.
No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain instead.
Install a lightweight code-snippet plugin such as “Code Snippets” or “WPCode” and paste the SeaText JavaScript there. Set it to run on all pages.
The snippet loads asynchronously. SeaText states the AI remains inert until activated. Performance impact is minimal, but test with your caching and optimization stack.
Yes. In the Main AI Hub, turn off all agents. The snippet stays on the page but does nothing until you reactivate agents.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Go to Plugins > Add New in your WordPress admin, search for 'SeaText AI', install, and activate. Then log into your SeaText AI account, visit your site for at least 40 seconds to activate the AI, and wait up to 10 minutes for the connection to appear.
Go to Plugins > Add New, search for 'SeaText AI', install the plugin, and activate it. That is the quickest way to get SeaText AI running on your WordPress site. No coding or developer help is needed. You just need admin access to your site and a SeaText AI account.
The plugin is the simplest way to connect your site to SeaText AI. It handles the technical setup for you. Once activated, the plugin places a secure script on your site. That script stays inert until you trigger it. The plugin also keeps your connection stable. If you switch themes or update WordPress, the plugin continues to work. The plugin is free and available in the official WordPress repository. You can update it like any other plugin.
SeaText AI gives you over 20 autonomous AI agents. These agents improve your site in real time. For example, the Google Ads Agent rewrites landing pages to match each keyword. The Translation Agent translates your site into 125 languages. The Bot Protection Agent catches fake clicks and helps you get refunds from ad platforms. The plugin makes all of this possible without manual work.
After you install and activate the plugin, you need to link it to your SeaText AI account. Log into your account on the SeaText website. The plugin and account communicate automatically. But you must visit your website for at least 40 seconds. This triggers the AI to activate and link to your account. Stay on the page for a full 40 seconds. Refresh the page a few times if needed.
After that, wait at least five minutes. Then check your SeaText AI dashboard. You should see your website name next to the SeaText logo at the top of the page. If it does not appear after 10 minutes, contact support. There may be a firewall or caching issue. The connection is secure. The script does not change your site until you activate agents in the Main AI Hub.
SeaText AI offers two ways to install: the plugin and a JavaScript snippet. The plugin is easier for most WordPress users. You install it from the admin panel and activate it. The snippet requires you to edit your theme files or use a custom code plugin. For WPEngine users, you must use the WP Engine custom JavaScript plugin to add the snippet. The plugin avoids that extra step.
If you already use a code manager or prefer manual control, the snippet works. But the plugin is recommended for simplicity. It updates automatically and stays compatible with WordPress. The snippet must be updated manually if SeaText changes the code. For most users, the plugin is the better choice. It takes under a minute to install and requires no maintenance.
If the plugin does not work, check these common issues. First, make sure you are using a real public domain. Development URLs like localhost are restricted. Dynamic development domains may not work either. SeaText AI cannot reliably associate traffic with those URLs. If you use WPEngine, install the WP Engine custom JavaScript plugin first. Then add the SeaText snippet from your account. The plugin may not work directly on WPEngine without that step.
Second, verify you visited your site for at least 40 seconds. Leaving the page early stops the activation. Refresh the page several times. Third, wait the full 10 minutes. The connection can take time. If you still do not see your site in the dashboard, contact SeaText support. They can check for issues on their end. Also, ensure you have only one SeaText AI account per domain. Using the same account for multiple sites will not work.
Once your site is connected, go to the Main AI Hub in your SeaText account. There you can activate the agents you need. Click on Configuration to adjust each agent’s settings. For example, the Google Ads Agent needs your campaign details. The Translation Agent needs your target languages. You can also edit variants manually. Navigate to Variants Edit in the left panel, select the URL and language, and review or edit translations.
After activation, the agents work automatically. The Google Ads Agent rewrites landing pages in real time based on the keyword that brought the visitor. The Translation Agent creates translated versions of your pages. The Bot Protection Agent monitors traffic and builds refund reports. You can track results by page, keyword, and variant in your dashboard. The agents are designed to run continuously and improve your conversion rate without manual effort.
No. The plugin installs like any other WordPress plugin. You only need admin access.
After installation, you must visit your site for 40 seconds. The connection appears in your dashboard within 5–10 minutes.
No. Each website needs its own SeaText AI account. Create separate accounts for each domain.
Wait up to 10 minutes. If it still doesn’t appear, contact SeaText support. There may be a firewall or caching issue.
SeaText AI offers a free tier. Check the pricing page for details.
Yes. The plugin is a convenience. You can also copy the JavaScript snippet from your SeaText account and paste it into your site’s header.
Install the WP Engine custom JavaScript plugin first. Then add the SeaText snippet from your account. The plugin may not work directly on WPEngine without that step.
No. Development URLs like localhost are restricted. Dynamic development domains may not work. Use a real public domain.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI integrates with WordPress by adding a JavaScript snippet to your site. You need a SeaText AI account, a valid public domain (not localhost), and the ability to paste custom JavaScript into your pages — either via your theme, a plugin, or the WP Engine plugin if hosted there. No specific WordPress or PHP version is mandated by SeaText; the script runs in the browser.
SeaText AI does not require a WordPress plugin. It works by pasting a JavaScript code snippet into your site's header or footer. The only hard prerequisites are a SeaText AI account and a live, publicly accessible domain. If you host on WP Engine, you must install their custom JavaScript plugin first. Development environments like localhost are blocked for security.
Getting the requirements right saves time and frustration. The integration is simple, but small mistakes can stop the AI from activating. Many users skip the WP Engine step or use a staging domain with a changing URL. They then see no site name in the dashboard and assume the tool is broken. Understanding the requirements upfront ensures a smooth setup and avoids repeated support tickets. It also helps you plan your account structure if you have multiple sites or environments.
The requirements affect how quickly the AI starts working. If you ignore the domain rule, the handshake will fail. If you forget to clear cache, the snippet may not execute. Each requirement exists to protect your site and the SeaText service. Knowing them means you can complete the integration in under five minutes.
SeaText AI is a client-side service. The integration is a single <script> tag that loads the AI agents onto your pages. Because it runs in the visitor's browser, there are no server-side dependencies such as a minimum PHP version, WordPress core version, or database changes. The checklist below covers what you must have before you start.
localhost, staging subdomains that change, or password-protected dev sites will not activate.functions.php.When a visitor loads your page, the browser downloads the SeaText snippet. The snippet is a small piece of JavaScript that runs asynchronously. It does not block the page from rendering. Once loaded, the script creates a connection to SeaText servers. This connection sends basic information like the visitor's URL and a session identifier. The script then waits for instructions from the SeaText AI hub. The AI hub tells the script which agents to run on that page. For example, the CRO agent may rewrite headlines. The translation agent may swap text into the visitor's language. All these changes happen in the browser's DOM after the page is fully loaded. No server-side code is involved. That is why your WordPress version and PHP version are irrelevant. The only requirement is that the browser can execute the script. As long as your site outputs the <script> tag, the integration works.
The snippet is secure. It does not send private data to SeaText. It only sends the page URL and a random session ID. The AI agents operate on the content that is already on the page. They do not access your database or admin area. SeaText uses a Content Delivery Network (CDN) to serve the snippet. This ensures fast loading worldwide.
The activation handshake is the process that connects your website to your SeaText account. It starts after you paste the snippet and save it. The handshake has three steps. First, a visitor must load a page on your site that contains the snippet. The script fires and sends a signal to SeaText servers. This signal includes the domain name and a unique code from your account. Second, the visitor must stay on the page for at least 40 seconds. This gives the script time to complete the initial exchange. You can trigger this yourself by visiting your own site. Open it in a browser and stay for 40 seconds. Third, SeaText processes the signal and links the domain to your account. This takes about five minutes. You can check the status in the SeaText dashboard. Look for your site name next to the SeaText logo. If it appears, the handshake is complete. The AI is now ready to activate. If it does not appear after ten minutes, something is wrong. The handshake can fail if the domain does not match the one you registered, if the snippet is blocked by a security header, or if the site is not publicly accessible.
| Item | Details |
|---|---|
| Integration method | JavaScript snippet in page header/footer |
| WordPress plugin required? | No (except WP Engine's Custom JavaScript plugin) |
| Minimum WordPress version | Not specified by SeaText; any version that allows custom JS works |
| Minimum PHP version | Not applicable — script runs client-side |
| Domain rule | One SeaText account per primary domain; localhost and dynamic dev URLs blocked |
| Activation signal | Site name appears next to SeaText logo in dashboard after 5–10 min |
| Multi-site usage | Create a separate SeaText account for each domain |
script-src 'self' https://cdn.seatext.com; (or the exact domain SeaText provides) to allow the script to load.You have pasted the snippet and waited ten minutes. But the dashboard still shows no site name. This is the most common issue. Here is how to diagnose it. First, check that you are looking at the correct SeaText account. You may have multiple accounts. Second, verify that the domain you registered matches the domain of your WordPress site exactly. For example, if your site uses www.example.com but you registered example.com, the handshake will not complete. Add the exact version. Third, clear all caching. This includes your WordPress cache plugin, server cache, and CDN cache. If your site uses a caching plugin like WP Rocket or W3 Total Cache, purge the cache. Then visit your site again and stay for 40 seconds. Fourth, check your browser's developer tools. Look for any JavaScript errors or blocked resources. The snippet should load from cdn.seatext.com. If it is blocked, your CSP or security plugin may be the cause. Fifth, if you use WP Engine, confirm that you installed and activated the Custom JavaScript plugin. The plugin must be applied to all pages. Sixth, if none of these steps work, contact SeaText support. They can check if the snippet is reaching their servers. Provide your account email and domain. Support usually responds within a few hours.
Another cause is a firewall or security plugin that blocks outgoing requests. Wordfence or Sucuri may prevent the script from contacting SeaText. Temporarily disable such plugins and test again. Remember to re-enable them after the handshake. The handshake only needs to happen once. After the site name appears, the connection is established. Future visits will work even if the security plugin is active.
No. SeaText only requires that you can inject a <script> tag globally. Any WordPress version that supports theme options, a code-snippet plugin, or functions.php edits will work.
No. The integration is pure client-side JavaScript. Your server PHP version is irrelevant.
localhost)?No. SeaText blocks localhost and dynamic development domains for security. Use a real domain (e.g., staging.example.com) with a valid SSL certificate.
Install the WP Engine "Custom JavaScript" plugin from your WP Engine dashboard, activate it network-wide, then paste the SeaText snippet there.
After pasting the snippet, visit your site and stay 40+ seconds. The dashboard usually shows the site name within 5 minutes; allow up to 10. If it doesn't appear, contact support.
No. Each domain needs its own SeaText account. For a multisite network, create an account per mapped domain.
Yes, as long as the builder allows global header/footer scripts. Paste the snippet in the builder's global code area or use a site-wide code plugin.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, the 40-second wait is mandatory for the initial activation of SeaText AI. It ensures the script on your website fully triggers and links to your account. Follow the readiness checklist to avoid common mistakes and get your AI agents working.
Yes, you must stay on the page for the full 40 seconds for activation to succeed.
SeaText’s integration guide states: "Important: Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account." (S1) This requirement is not optional; it guarantees that the activation handshake completes without error.
SeaText needs time to confirm that the script installed on your site is running correctly and communicating with its servers. The 40‑second buffer accounts for network delays, page load times, and the script's initial handshake. This prevents partial activations that could cause errors later.
localhost or 127.0.0.1) won't work. You must use a live, public domain.Activation unlocks the AI agents that rewrite headlines, offers, and CTAs in real time. SeaText reports up to a 20% lift in conversion when agents are active. If activation fails, those agents never run, and you miss the potential uplift.
Because the activation step is required only once per domain, the long‑term conversion benefit outweighs the brief wait.
If you cannot stay 40 seconds, you can still confirm activation by checking the dashboard after five minutes. The domain name appears next to the SeaText logo. This visual cue tells you the handshake succeeded.
Alternatively, open the browser console and look for a network request to seatext.com/api/activate. A successful 200 response indicates the script completed its handshake.
Developers who need automated testing can simulate the 40‑second presence using headless browsers. Run a script that loads the page, waits 40 seconds, and then closes the tab. This satisfies the server‑side timer without manual effort.
Another option is to use a server‑side ping endpoint provided in the integration guide. Sending a POST request with your domain token can pre‑warm the activation, but SeaText still requires a real browser session for the final step.
<head> or as instructed by your plugin.The 40‑second wait is only needed for the initial activation of a domain. After that, you can visit your site normally without waiting. If you add a new domain, you must repeat the process for that domain. Development environments that use dynamic URLs (like *.ngrok.io) may not function properly; use a static real domain.
Teams often wonder if the wait slows down CI pipelines. Because activation is a one‑time step, you can perform it on a staging domain once, then promote the same script to production. The production domain will still need its own 40‑second activation, but this happens only after the first deployment.
If your site uses aggressive caching, the activation request may be blocked. Disable caching temporarily during the first visit.
Some browsers block third‑party scripts by default. Ensure your browser allows the SeaText script to run, or use an incognito window with extensions disabled.
Activation may not complete. Refresh the page and stay for the full 40 seconds.
Yes, you can switch to another tab or window, as long as the page remains open in the background. The script continues to run.
After 5 minutes, check your SeaText dashboard. Your website name should appear next to the SeaText logo. If it doesn't, contact support.
No, only for the initial activation of each domain. After that, the AI works in the background without any further wait.
Create a separate SeaText account for each website. Each will need its own 40‑second activation.
Only if it's a real, publicly accessible domain. Dynamic development domains often fail. Use a stable domain.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: No, the 40‑second wait is a built‑in security step that cannot be bypassed. Skipping it will prevent the AI from activating and linking to your account.
No, the 40‑second wait is built into SEATEXT’s activation flow and cannot be skipped without causing the AI to stay inactive or fail to link to your account.
| Criteria | Correct approach | Incorrect approach |
|---|---|---|
| Stay on page | Remain for at least 40 seconds | Refresh or navigate away early |
| Domain used | Use a verified primary domain | Use localhost or a development sub‑domain |
| Verification period | Wait 5 minutes for logo name to appear | Assume activation is instant |
The timer lets SEATEXT confirm that a real visitor is on the page, then securely links the AI instance to your account. This prevents accidental or malicious activation.
The wait is hard‑coded in the JavaScript snippet that runs in the browser. Removing or shortening it breaks the handshake between your site and SEATEXT’s servers, so the AI remains inert.
Some users refresh the page quickly or use a script to reload faster, hoping to save time. This often results in the AI never activating, leaving the SEATEXT logo blank and causing support tickets.
<head> of every page you want to use.SEATEXT links each AI instance to a single primary URL. If you need the AI on more than one site, you must create a separate account for each domain. Development URLs such as localhost or dynamic sub‑domains are blocked for security reasons. Using an unverified domain will cause the activation timer to run, but the handshake will never succeed, leaving the AI inert.
After the 40‑second wait, wait an additional five minutes. When the SEATEXT logo at the top of the page displays your website name, the AI is fully linked and ready.
If you move on before the timer finishes, the AI stays inert. You will see no logo name, and any attempts to use agents will fail until you repeat the full activation steps.
Scenario 1 – New production site: After installing the snippet, stay on the homepage for 40 seconds. After five minutes you see the logo with your domain name. Activation succeeded.
Scenario 2 – Staging environment: Because staging URLs are considered development domains, SEATEXT will not complete activation. Create a separate account for the staging domain or test on a real domain.
Scenario 3 – Multiple regional sites: Set up a distinct SEATEXT account for each regional domain (e.g., us.example.com and eu.example.com). Follow the same 40‑second wait on each site.
For a full activation guide and troubleshooting tips, visit the SEATEXT AI integration page.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: There is no legitimate way to avoid the 40-second activation wait when installing SEATEXT AI. The wait is a required security step to confirm the script is installed correctly and link your domain to your account. Trying to bypass it with quick refreshes, automation, or leaving the page early will only delay activation.
The 40-second activation wait is not a bug or a delay you can skip. It is a deliberate part of the installation process that confirms your website has loaded the SEATEXT AI script and that the script can communicate with your account. There is no legitimate way to avoid it. Any attempt to bypass the wait — by refreshing early, leaving the page, or using automation — will prevent the activation from completing.
When you first install the SEATEXT AI script on your website, the system needs to verify that the script is present and functional. The 40-second wait ensures that a real visitor (not a bot) has loaded the page and that the script can link your domain to your SEATEXT account. This prevents accidental activation on wrong domains or test environments.
After the wait, you must also refresh the page or visit it several times. The source instructions say: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.” The combination of staying on the page and refreshing creates a reliable activation signal.
The SEATEXT script loads in the browser when a page is visited. It sends a signal to the SEATEXT servers that includes the domain and a timestamp. The server starts a 40-second timer for that domain. If the page remains open and in the foreground for the full duration, the server marks the domain as verified. A subsequent refresh or new page view confirms the script is active across the site. This two-step process reduces false positives from bots or brief visits.
Some users try to speed up the process by refreshing the page every few seconds. This actually resets the timer. If you refresh before 40 seconds have passed, the system does not register a continuous visit. You need to stay on the page for the full 40 seconds without navigating away or refreshing.
Correct approach: Open the page, wait at least 40 seconds, then refresh. Do not refresh during the wait.
Another common error is switching to another tab or closing the browser after installing the script. The activation requires the page to be active in the foreground. If you leave the page, the timer stops. The system only counts time when the page is visible and loaded.
To avoid this, keep the installation page open and in focus for the full 40 seconds. Use the time to review the next steps in the documentation.
Some users attempt to use browser automation tools or code to simulate a page visit. This defeats the purpose of the verification. The activation is designed to confirm that a real human visitor has loaded the page. Automated scripts often fail to load the JavaScript correctly or trigger security blocks. The result is a failed activation and no website link.
Always perform the activation manually from a regular browser. Do not use headless browsers, curl, or testing tools.
After the 40-second wait, you must refresh the page or visit it again. Some users wait 40 seconds once and then assume the activation is done. The instructions specify “visit or refresh your website several times.” This means you should load the page, wait, then refresh or navigate to another page on your site. The multiple visits help the system confirm the script is installed on all pages.
After the initial activation, wait about five minutes for your website name to appear next to the SEATEXT logo at the top of the dashboard. This is the final confirmation that the link is active.
You will encounter the 40-second wait in three typical situations:
If you manage several sites, plan the wait time into your deployment schedule. You can activate domains in parallel by opening each in a separate browser tab and waiting simultaneously.
Since you cannot skip the wait, use the 40 seconds wisely. Here are a few things you can do:
This way, you are not waiting idly — you are preparing for the next steps.
| Fact | Detail |
|---|---|
| Minimum wait time | 40 seconds on a single page visit |
| Required action after wait | Refresh or visit the site several times |
| Confirmation time | Up to 5 minutes for website name to appear in dashboard |
| Security purpose | Ensures the script is installed on a real domain visited by a human |
| Automation allowed? | No — manual browser visit required |
| Failure to wait | Activation will not complete; no link between domain and account |
The 40-second wait applies to the initial activation of a new domain. Once your domain is linked, you do not need to repeat the wait for subsequent configuration changes. However, if you ever remove and reinstall the script, the wait applies again.
There is no exception for specific account types or plans. Every SEATEXT AI account, regardless of pricing tier, must go through the same activation process. This is a security measure, not a feature restriction.
If you have waited more than 10 minutes and your website name does not appear in the dashboard, contact support. This may indicate a script installation issue that requires assistance.
If activation fails after following the steps, check these points:
<head> section of every page.If the problem persists, contact SEATEXT support with your domain and account details.
No. Auto-refresh extensions may interfere with the script loading. Perform the refresh manually from your browser.
Make sure you are visiting the correct domain where the script is installed. Also check that the script is placed in the section of your site. If the problem persists, contact SEATEXT support.
You only need to perform the wait on one page per domain. Once the domain is linked, all pages are covered. However, you should then visit a few more pages to confirm the script runs everywhere.
Yes, any visitor (including a colleague) can trigger the activation as long as they stay on the page for 40 seconds and then refresh. The system does not require the account owner to do it personally.
No. The script remains inert until activated. It does not slow down your site during the wait. The wait is purely a verification step.
The timer resets. You will need to open the page again and wait the full 40 seconds from that new visit.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Leaving the page before the full 40 seconds can cause activation to fail. The SEATEXT AI needs that time to link your website to your account. If you leave early, you will likely need to start the activation process again.
If you leave the page during the 40‑second activation window, the activation may fail. The AI uses that time to verify your site and bind it to your account. Closing the tab or navigating away interrupts the process.
When you leave before 40 seconds, the AI cannot finish the handshake. Your website name will not appear next to the SEATEXT logo in the dashboard. The AI stays inert and will not rewrite or translate any content.
The wait lets the AI visit your page several times. It checks the domain, confirms the script is loaded, and creates a secure link to your account. This prevents unauthorized domains from being activated.
<head> of every page you want to optimize. If you use WPEngine, install the WP Engine plugin and add the code there.Each account works with one primary URL only. Development URLs such as localhost are blocked. Dynamic development domains may not associate traffic reliably.
Do not simply wait longer without repeating the visit step. The AI needs fresh page loads to complete the handshake.
| Fact | Detail |
|---|---|
| Required wait time | At least 40 seconds on the page after visiting/refreshing |
| Confirmation sign | Website name appears next to SEATEXT logo at top of dashboard |
| Maximum wait for confirmation | Up to 10 minutes; if not seen, contact support |
| Domain restriction | One account per primary URL; development/localhost URLs restricted |
| AI activation | AI remains inert until activation is complete |
This guidance covers the initial activation of SEATEXT AI on a website. Activating additional AI agents later does not require another 40‑second wait. If you install via the WPEngine plugin, the same activation rule applies. The advice does not cover server‑side rendering issues or custom CSP policies that block the script.
No. Thirty seconds is insufficient. The requirement is at least 40 seconds. Leaving earlier risks activation failure.
Refreshing is part of the process. The instructions say to visit or refresh several times. You must stay on the page for a cumulative 40 seconds.
Yes. Stay on the page where the SEATEXT script loads. The AI tracks that specific page load.
You should see it within five minutes. If not, wait up to ten minutes. If still missing, contact support.
No. Each SEATEXT AI account links to a single primary URL. Create separate accounts for each domain.
You will likely need to restart. Revisit the integration page, reinstall the script if needed, and repeat the visit/refresh cycle.
Any full page load in a browser tab where the SEATEXT script is present counts. Opening the URL in a new tab and letting it load qualifies.
Multiple tabs can generate extra loads, but you still need at least 40 seconds of active time on one tab. Extra tabs do not replace the time requirement.
Yes. Once the site is linked, you can enable any number of agents from the Main AI Hub without another wait.
Install the WP Engine plugin, add the JavaScript code there, then follow the same visit/refresh and 40‑second wait steps.
Create a separate SEATEXT AI account for each domain. Each account handles one primary URL only.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, you can use your phone during the 40-second activation wait. Keep the activation page open and active in your browser. The countdown only runs while the page stays in the foreground.
Yes, you can use your phone during the 40‑second activation wait. The only condition is that the activation page stays open and active in your browser.
| Can use phone while waiting | Requires active tab | Impact on activation timer | Device sleep behavior | Recommended practice |
|---|---|---|---|---|
| Yes, as long as the tab stays foreground | Yes – background tabs may pause scripts | Timer stops when the page is not active | Prevent auto‑lock or keep screen awake | Keep the tab frontmost, interact lightly, and disable sleep if possible |
If you can keep the tab active, you can multitask; otherwise, pause other activities.
After confirming you can multitask, proceed to the next step in the activation process. Learn more — Continue to the activation guide.
The integration guide states: “Important: Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”1 During this period the AI checks that the script is reachable and securely binds the account to the domain.
The wait serves three purposes:
If any of these checks fail, the activation is aborted and you must restart.
When a page is in the foreground, browsers execute JavaScript timers (setTimeout, setInterval) at near‑real time. In a background tab, most browsers apply a minimum 1‑second delay, and some suspend timers entirely after a few minutes. This behavior is defined by the Page Visibility API and is intended to reduce CPU and battery usage.
SeaText’s activation script relies on a continuous 40‑second timer. If the tab becomes hidden, the timer pauses, extending the real‑world wait beyond 40 seconds. That is why the guide emphasizes keeping the page visible.
Mobile operating systems often lock the screen after a short period of inactivity. When the screen locks, the browser is considered background and timers stop. To avoid this:
These steps keep the activation page alive for the full 40 seconds.
The activation ping travels over HTTPS to SeaText’s servers. A weak Wi‑Fi signal or intermittent cellular data can cause packet loss, which may reset the timer. If you notice the countdown stalling, try:
seatext.com.Yes, you can open other apps as long as the activation tab stays in the foreground. If you switch to another app, the browser may be sent to the background, pausing the timer. A safe workflow is:
Closing the tab or navigating away stops the activation entirely. The timer resets, and you must reload the page and wait another 40 seconds. Backgrounding the tab may pause the timer; when you bring the tab back to the front, the countdown resumes from where it left off, but the total elapsed time may exceed 40 seconds.
Mobile users often face stricter power management. Follow these steps for a smooth activation:
| Step | Requirement | Typical time |
|---|---|---|
| Visit your website | Open the page after installing the SeaText script | Instant |
| Stay on the page | Keep the page active in your browser | At least 40 seconds |
| Check for confirmation | Look for your website name next to the SEATEXT logo | Up to 5 minutes (10 minutes if not visible) |
Yes. You may scroll or interact lightly, but you must not navigate away or minimize the browser.
Yes. The activation only monitors the browser tab on the device that started the timer.
Wait up to five minutes for the confirmation banner. If it still does not appear after ten minutes, contact SeaText support.
No. Closing the tab stops the activation. You will need to restart the process.
Yes. Orientation does not affect the timer as long as the tab stays active.
No. The activation runs in the background and only links your account to the site. Visitor experience changes only after you configure AI agents.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: The 40-second activation timer is a one-time requirement during SEATEXT AI installation: after adding the JavaScript snippet to your site, you must visit or refresh the page and stay on it for at least 40 seconds. This dwell time gives the activation process enough time to complete background checks and setup tasks, such as registering the domain with your account and marking the AI as active so it can start generating variants and translations.
The timer is not a recurring countdown or a user-facing widget. It is a single dwell-time threshold that SEATEXT AI uses during initial installation to confirm that the tracking script has loaded, communicated with the SEATEXT servers, and bound the current domain to your account. The official integration guide states: "Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account." [S1]
In practice, the 40 seconds give the asynchronous JavaScript time to:
If you navigate away before the threshold, the handshake may remain incomplete and the dashboard will not show your website name next to the SEATEXT logo—a visual cue that the connection succeeded.
SEATEXT's public documentation does not disclose the exact reasoning behind the 40-second figure. The integration guide simply specifies the threshold as a requirement for activation. It is likely chosen to accommodate variations in network latency, script loading order, and server response times across different hosting environments. Shorter windows might risk incomplete handshakes on slower connections, while longer windows would delay the user without added benefit. The 40-second value represents the vendor's recommended minimum dwell time for reliable activation.
localhost are restricted for security. [S1]<head> or via a tag manager. On WPEngine, use the dedicated plugin to inject custom JS. [S1]The snippet loads a lightweight bootstrap that performs the following steps (details are based on typical client-side activation patterns; SEATEXT does not publish the exact internal implementation):
If the activation request does not succeed within the dwell window, the client may retry automatically. Persistent failure will surface a console warning and notify the account owner.
| Mistake | Why it fails | Fix |
|---|---|---|
| Closing the tab at 30 s | Heartbeat never sent; activation request never completed | Keep the tab foregrounded for the full duration |
Using localhost or 127.0.0.1 | Development URLs are blocked by policy | Use a real domain (e.g., staging.example.com) with a valid TLS cert |
Snippet loaded via defer inside a consent banner that fires after 60 s | Bootstrap starts after the 40 s window already passed | Move snippet above consent logic or whitelist SEATEXT in the CMP |
| Multiple domains on one account | Each account binds to a single primary URL | Create a separate account per domain [S1] |
| Cloudflare Rocket Loader or similar JS optimizer | Rewrites script execution order, may drop storage writes | Exclude seatext.js from optimization |
| Concept | Scope | Frequency | User action |
|---|---|---|---|
| 40-second dwell timer | Initial install only | Once per domain/account | Stay on page |
| Agent activation (Main AI Hub) | Per agent (CRO, Translation, Bot Protection…) | On-demand | Click "Activate" in dashboard |
| Variant generation cycle | Continuous optimization | Every 24–72 h | None (automatic) |
| Bot Protection evidence window | Paid-traffic sessions | Per click | None (automatic) |
The dwell timer is purely a domain-to-account binding ceremony. Once the activation token is cached, the timer never runs again unless you reinstall the snippet or clear the browser storage.
| Property | Detail | Source |
|---|---|---|
| Trigger | First visit after snippet deployment | S1 |
| Required dwell time | ≥ 40 seconds | S1 |
| Dashboard confirmation delay | Up to 5 minutes (10 minutes max before escalation) | S1 |
| Account-to-domain ratio | 1:1 (separate account per domain) | S1 |
| Restricted environments | localhost, dynamic dev tunnels | S1 |
| Post-activation state | AI inert → active; agents selectable in Main AI Hub | S1, S3 |
example.com/blog only, the timer still runs on that subpath, but the account binds to the root domain.Many SaaS tools use a "Click to verify" button in the dashboard. SEATEXT chose a passive dwell timer for three reasons:
The trade-off is that developers used to instant CLI feedback must adjust expectations. The five-minute dashboard lag is the price of a fully client-side, cookie-less handshake that works behind corporate firewalls and strict CSPs.
No. One successful activation per domain/account pair is sufficient. The token is scoped to the root domain and shared across all paths.
Not recommended. The handshake expects a real browser with session storage, local storage, and a painted viewport. Headless Puppeteer/Playwright scripts often fail the bot-resistance heuristics. Use a staging domain and a manual visit instead.
The timer is client-side only; it does not depend on your server session. As long as the browser tab stays open, the 40 seconds elapse regardless of your backend TTL.
No. The bootstrap is small, loads with defer, and does zero work until DOMContentLoaded. The 40-second logic is a simple setTimeout that sets a flag—no layout shifts, no long tasks.
Activation only enables the engine. Variants appear after the AI CRO Reading Analysis Agent finishes its first crawl (usually 2–6 hours). Check the "Agents" tab → "AI CRO Reading Analysis Agent" → status.
Not configurable. The 40-second constant is part of the activation protocol; changing it would invalidate the handshake. Plan the manual visit into your launch checklist.
Clearing local storage removes the activation token. The next visit re-triggers the 40-second timer automatically. This is expected behavior, not a bug.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Activation finishes when you see a confirmation message or are redirected to a success page after the 40‑second countdown. This guide explains the exact signals, why they matter, and what to do next.
You'll see a confirmation message or be redirected to a success page once the 40‑second countdown ends.
Activation is complete when your website name appears next to the SEATEXT logo at the top of the SEATEXT dashboard. This visual cue tells you the script is linked to your account and ready for the next steps.
The 40‑second page visit is only the trigger. After the trigger, SEATEXT needs a few minutes to process the data and update the dashboard.
If you host on WP Engine, download the WP Engine plugin that lets you add custom JavaScript site‑wide.
If the website name appears next to the SEATEXT logo, activation succeeded.
Open the SEATEXT dashboard. Look at the top of the page. The confirmation is your website name displayed beside the SEATEXT logo.
If the name does not appear after five minutes, give it up to ten minutes. SEATEXT states that the signal may take up to ten minutes in rare cases.
Once you see the confirmation, go to the Main AI Hub. There you can turn on the specific AI agents you need.
Click Configuration to set parameters such as language, tone, and conversion goals.
Review the first round of automatic translations in Variants Edit. Choose a URL, pick a language, and edit or approve the generated content.
Scenario 1 – New e‑commerce store. After installing the script, the owner stays on the homepage for 45 seconds, waits six minutes, and sees the confirmation. They then activate the Product Copy Agent to improve product descriptions.
Scenario 2 – Multi‑regional brand. The marketing team creates separate SEATEXT accounts for US and EU domains. Each account follows the same activation steps, ensuring the Translation Agent works on the correct domain.
Scenario 3 – WP Engine client. The developer installs the WP Engine custom JavaScript plugin, applies it site‑wide, triggers the 40‑second visit, and confirms activation after five minutes.
After the 40‑second page stay, wait at least five minutes. The dashboard signal may appear up to ten minutes after the trigger.
No. Localhost and other development URLs are restricted. Use a real public domain.
Yes. Each SEATEXT account is linked to a single primary URL. Create separate accounts for multiple sites.
No. Installation alone does not activate the AI. You must also trigger the 40‑second visit and wait for the dashboard signal.
Proceed to the Main AI Hub, enable the agents you need, and configure their settings.
Contact SEATEXT support immediately. The missing signal usually indicates an installation problem that needs assistance.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: No, the 40‑second wait is a mandatory security step during SEATEXT AI activation. There is no alternative method to bypass it. The wait ensures the script is installed correctly and links your website to your account.
There is no way to activate SEATEXT AI without waiting the full 40 seconds. This timed step is part of the security check that links your website to your account. The source pack explicitly states:
“Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”
Because the wait is built into the activation script, no shortcut, workaround, or alternative activation method exists.
The delay is not arbitrary. It gives the SEATEXT AI script enough time to load, verify the domain, and establish a secure connection with SEATEXT’s servers. This prevents bots or automated scripts from activating the AI on domains you don’t control. The source pack describes the step as a "security check" that links the script to your account.
During the wait, the script sends a handshake request, receives a token, and stores the token in the browser’s local storage. Only after the token is confirmed does the AI become active.
After you paste the JavaScript snippet into your site, you must visit or refresh the page. For the next 40 seconds the script performs three actions:
If the page is closed before the signal arrives, the process aborts and you must start over.
Yes. The activation page must stay loaded and visible, but you can open other tabs, windows, or even a different device. The key is that the original tab remains open and does not navigate away. Minimizing the window or switching apps on the same device does not break the process.
Practical tip: keep a timer on your phone and open the SEATEXT dashboard in a second tab. When the timer hits 40 seconds, you can immediately check the dashboard for confirmation.
Leaving the page before the 40‑second mark will likely cause activation to fail. You will need to revisit or refresh the page and stay for the full duration again. The source pack notes that there is no penalty for multiple attempts, but each attempt requires the full wait.
Common symptom: the website name does not appear next to the SEATEXT logo after 5–10 minutes. In that case, repeat the visit‑and‑wait step.
After the wait, wait at least five minutes. Then look at the top of the SEATEXT dashboard. Your website name should appear next to the SEATEXT logo. This confirms the activation succeeded. If you do not see it after ten minutes, contact SEATEXT support as the source pack advises.
Tip: refresh the dashboard once after five minutes; the UI does not auto‑refresh.
The 40‑second pause is a security barrier. Without it, a malicious actor could script rapid domain verification requests and hijack accounts. By forcing a human‑visible pause, SEATEXT ensures that a real user is present on the domain.
Skipping the wait would also break the cryptographic handshake that protects the token exchange. The source pack emphasizes that the activation step is "secure" and that the AI remains "inert until activated".
<head> of every page you want to activate.Following this checklist eliminates guesswork and ensures a successful activation.
Since the wait cannot be avoided, treat it as a micro‑planning window. While the timer runs, you can:
These actions turn a forced pause into a productivity boost.
If activation fails repeatedly, consider these common causes:
When in doubt, contact SEATEXT support with the URL and a screenshot of the activation page.
Each domain requires its own SEATEXT AI account and its own 40‑second activation. This design prevents cross‑domain token leakage. If you manage a staging site and a production site, create two accounts, install the script on each, and run the activation timer separately.
Tip: keep a spreadsheet of domain names, account emails, and activation timestamps. This helps you track which sites have completed the mandatory wait.
No. The wait is tied to the script loading on your site, not the browser. Every browser requires the same 40‑second stay.
If the connection drops, the activation may pause or fail. Restore your connection and repeat the visit‑and‑wait step.
No. It is a one‑time event per domain. Once activated, you can log in and manage your agents without any waiting.
Yes, but you must create a separate account for each domain. Each account requires its own 40‑second activation wait.
Use a timer on your phone or watch. The SEATEXT dashboard does not count down; you simply need to stay on the page for at least 40 seconds.
You must start over. Visit or refresh the page again and stay the full 40 seconds.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Refreshing the page resets the 40‑second timer and can cause activation to fail. Keep the page open until the timer finishes.
Refreshing the page during the 40‑second activation will likely reset the timer and may prevent the AI from linking to your account. Stay on the page until the countdown completes.
The activation step confirms that the SeaText script is correctly installed and ties the script to your SeaText account. During this period the server watches for a stable session from the same browser. If the session lasts at least 40 seconds, the server records the visit and creates a permanent link between the script and your account.
The 40‑second wait is a security measure. It proves that a real user, not an automated bot, is loading the page. The server validates the request by checking a short‑lived token that expires after 40 seconds. If the token expires before the request finishes, the server discards the activation attempt.
Interrupting the timer—by refreshing, navigating away, or closing the tab—breaks the token validation. The server then treats the visit as incomplete, and no activation record is created. This prevents accidental or malicious activation that could link the AI to the wrong domain.
When you refresh, the browser discards the current request and starts a new one. The activation server sees a new visit, so the original 40‑second window is lost and the link is never created. The new request must again wait the full 40 seconds before it can succeed.
Many users think a quick reload will speed things up. In reality, it forces you to repeat the whole activation sequence. Each reload restarts the timer, and the server will only accept the final, uninterrupted visit.
When the page loads, the SeaText script sends an HTTP GET request to the activation endpoint. The request includes a temporary token stored in a cookie or session storage. The server reads the token, records the visitor’s IP and user‑agent, and starts a 40‑second countdown.
If the browser stays on the page, the token remains valid and the server finalises the activation after the countdown. If the page is refreshed, the browser clears the token and creates a new one, causing the server to reset the countdown.
This design ensures that only a continuous, human‑driven session can complete activation, protecting against scripted attacks that try to register many domains quickly.
Look for your website name displayed next to the SeaText logo on the dashboard. If it appears, activation is complete. The dashboard may take up to five minutes to update, as the server propagates the new link across its internal systems.
| Fact | Detail |
|---|---|
| Required wait time | At least 40 seconds on the page |
| Verification point | Site name appears next to SeaText logo after ~5 minutes |
| Refresh impact | Resets timer and may cause activation to fail |
| Token validation | Server checks a short‑lived token that expires after 40 seconds |
| Common failure causes | Slow network, auto‑refresh extensions, manual reload |
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: The countdown begins as soon as you load or refresh the page after adding the SEATEXT script. You just need to stay on that page for the full 40 seconds for activation to complete.
Yes, the 40‑second activation countdown starts automatically the moment you visit or refresh the page after installing the SEATEXT JavaScript snippet. No extra button or manual start is required—simply keep the page open and the timer runs.
| Fact | Detail |
|---|---|
| Trigger | Page load after script installation |
| Duration | At least 40 seconds of continuous page view |
| Purpose | Links the site to your SEATEXT AI account |
| Verification | Website name appears next to SEATEXT logo after ~5 min |
| Limitation | Requires a public domain; localhost is blocked |
The timer gives the SEATEXT script time to communicate with your account, prove that a real user is present, and securely link the site to the AI platform.
During those seconds the script sends a handshake request to the SEATEXT backend, receives a token, and stores it locally. The backend records the domain and associates it with your account.
This handshake prevents automated bots from activating the service on unrelated domains. It also ensures the domain is reachable from the public internet.
It begins the instant the page finishes loading after you have added the script. The moment the browser renders the page, the timer starts counting down.
If the page uses server‑side rendering, the timer starts after the HTML is delivered. For client‑side frameworks, it starts after the JavaScript bundle executes and inserts the SEATEXT snippet.
<head> of every site page.Each domain requires its own account. If you manage a staging domain and a production domain, create two separate accounts.
If the page takes longer than usual to load, wait until it fully renders before counting the 40 seconds. A slow load can pause the timer.
Watch the browser’s network tab: the SEATEXT handshake request should appear within the first few seconds. If it does not, the script may be blocked by a content‑security policy.
localhost are blocked; use a real domain to complete activation.https://seatext.com.After the 40‑second wait, wait an additional five minutes. The top of the SEATEXT dashboard will show your website name next to the SEATEXT logo. If it does not appear after ten minutes, contact support.
You can also open the browser console and look for a log line similar to “SEATEXT activation complete”. That confirms the handshake finished.
For CI/CD pipelines you can script a headless browser visit that loads the page, waits 45 seconds, then checks the dashboard via the API. This removes manual steps for each new staging domain.
Remember that each staging domain still needs its own SEATEXT account because the platform ties one account to one primary URL.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Stay on your website page for at least 40 seconds after installing the SEATEXT AI script, avoid refreshing or closing the tab, and use a stable internet connection. Then wait up to five minutes for your website name to appear next to the SEATEXT logo in the dashboard.
Stay on the page for at least 40 seconds, avoid refreshing or closing the tab, and ensure a stable internet connection.
Activation succeeds when you follow a short, ordered sequence. The most common failure is leaving the page too early. Use this checklist before and during activation.
Activation is the step that links your installed script to your SEATEXT AI account. The AI remains inert until this link is confirmed. That protects your site content from changes before you are ready.
When you visit or refresh your website and stay for at least 40 seconds, the script sends the confirmation signal. SEATEXT then associates that traffic with your account. Without this step, the dashboard cannot see your website.
The 40-second stay is not a loading delay. It is the window the script needs to register the visit and prove the installation is live. Leaving early can stop the signal before it completes.
Refreshing too quickly or closing the tab has the same effect. Treat the 40 seconds as a required step, not a suggestion. If you miss it, repeat the visit and stay longer.
| Mistake | What happens | How to fix it |
|---|---|---|
| Leaving before 40 seconds | Activation signal may not complete | Visit or refresh again and stay at least 40 seconds |
| Using localhost or a dynamic dev domain | Traffic cannot be associated with your account | Use a valid, real domain |
| Checking the dashboard too early | Website name not yet visible | Wait at least five minutes before checking |
| Unstable internet during the visit | Signal interrupted | Repeat activation on a stable connection |
| One account for multiple domains | Only one primary URL is linked | Create a separate account for each domain |
After the 40-second visit, wait at least five minutes. Then look at the top of the SEATEXT dashboard page. Your website name should appear next to the SEATEXT logo.
If you see the name, the website is connected and ready for the next step. If you do not see it after 10 minutes, contact SEATEXT support. That delay can indicate an installation issue on your platform.
Once your website name appears, proceed to the Main AI Hub. Activate the AI agents you need on your preferred pages. Use the Configuration option to adjust the AI parameters.
SEATEXT AI provides an initial round of automatic translations and variants for testing. You can review or edit them under Variants Edit in the left panel. Select the URL and language you want to edit.
This checklist applies to the initial SEATEXT AI activation on a normal website. It does not cover troubleshooting a broken installation after the 10-minute window. If your platform blocks custom JavaScript, the script may never load, and the 40-second visit will not help.
It also does not apply to activating individual AI agents after the website is linked. That is a separate step in the Main AI Hub. Activation of the website must succeed first.
| Fact | Detail |
|---|---|
| Required stay time | At least 40 seconds on your website page |
| Dashboard confirmation | Website name appears next to the SEATEXT logo |
| Wait before checking | At least five minutes |
| Support threshold | Contact support if not visible after 10 minutes |
| Domain rule | One account per primary URL; localhost restricted |
No. Refreshing restarts the visit. Stay on the page without refreshing for the full 40 seconds.
Open your website again and stay for at least 40 seconds. The activation signal can be repeated.
Yes. SEATEXT recommends visiting or refreshing your website several times and staying at least 40 seconds each time.
Wait a little longer. If it is still missing after 10 minutes, contact SEATEXT support. There may be an installation issue.
No. Development URLs such as localhost are restricted. Use a valid, real domain.
Yes. Each SEATEXT AI account is linked to a single primary URL. Create one account per website.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: The JavaScript code snippet for SeaText AI integration is a small script you copy from your SeaText AI account and paste into your website's pages. It loads the SeaText AI library and links your site to your unique account, letting the AI stay inert until you activate it.
Copy the following code and place it in the <head> of every page on your site.
<script src="https://cdn.seatext.com/sea-text.js"></script>
<script>
window.SeaTextInit({
apiKey: 'YOUR_UNIQUE_API_KEY',
domain: 'yourdomain.com'
});
</script>The JavaScript code snippet for SeaText AI integration is the script shown inside your SeaText AI account under General Integration. You copy that snippet and paste it into your website's pages, usually in the <head> section or through a tag manager. The script loads the SeaText AI library and connects your site to your unique API key, so the AI can later rewrite headlines, offers, and calls to action when you activate it.
SeaText does not publish one universal snippet that works for every account. Each account gets its own code because the script must link your domain to your specific SeaText AI setup. If you use WP Engine, you also need the WP Engine plugin that lets you add custom JavaScript across all pages.
The snippet is not the AI itself. It is a loader. When a visitor opens your page, the script fetches the SeaText AI runtime and checks which account and domain the page belongs to. After that, the AI stays dormant until you activate it from your SeaText AI dashboard.
This matters because it means the script does not change your content on its own. You control when the AI starts rewriting headlines, product blocks, or CTAs. The source pack states: "The installation process is secure, and the AI remains inert until activated, ensuring the integrity of your website's content."
You cannot guess the snippet or copy it from a public forum. You must log in to your SeaText AI account and open the General Integration page. The code is displayed there, ready to copy.
If you do not have an account yet, create one first. The source pack says: "Before you can install the script, you need a SEATEXT AI account."
<head> section of every page. If you use a tag manager, add it as a custom HTML tag that fires on all pages.The most common mistake is pasting the snippet on only one page. SeaText needs the script on every page where you want the AI to work. If you add it only to your homepage, the AI cannot rewrite product pages or landing pages.
Another mistake is using a development URL. The source pack warns: "Development URLs, such as localhost, are restricted for security reasons. Ensure you use a valid, real domain for these cases." Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account.
A third mistake is expecting instant results. After pasting the snippet, you must visit the site several times and wait at least five minutes before the dashboard shows your website as connected.
Each SeaText AI account is linked to a single primary URL. If you need SeaText on a development domain and a production domain, you must create separate accounts for each domain. The same rule applies if you run several websites: create one account per website.
This is a hard limitation, not a suggestion. If you try to use one snippet across two unrelated domains, the AI may not associate traffic correctly with your account.
Once the snippet is installed and your site is connected, the real work begins in the SeaText dashboard. You activate specific AI agents, such as the Google Ads Landing Page Agent or the AI CRO Reading Analysis Agent. You can also adjust parameters under Configuration.
SeaText provides an initial round of automatic translations and variants for testing. You can log in, open Variants Edit, and review or manually edit translations for any URL and language.
| Fact | Detail |
|---|---|
| Where to find the snippet | Inside your SeaText AI account under General Integration |
| What the snippet does | Loads the SeaText AI library and links your site to your account |
| When the AI starts working | Only after you activate it in the Main AI Hub |
| WP Engine requirement | Install the WP Engine plugin for custom JavaScript |
| Development URLs | Restricted; localhost will not work |
| Multiple domains | Require separate SeaText AI accounts |
| Activation check | Visit your site several times, stay 40+ seconds, wait 5 minutes |
This integration method applies to standard websites where you can edit the page template or use a tag manager. If your platform blocks custom JavaScript, you may need a plugin or developer help. WP Engine users have a specific plugin path, but other managed hosts may have their own rules.
The snippet also does not work on localhost or dynamic development domains. If you are building a site locally, you cannot test the full SeaText integration until you deploy to a real domain.
Finally, the snippet alone does not optimize anything. It only connects your site. You still need to activate agents and configure them in the dashboard.
No. Each SeaText AI account is linked to one primary URL. Create a separate account for each website.
No. Copy the code exactly as provided. Do not modify it unless SeaText support tells you to.
Visit or refresh your website several times and stay on a page for at least 40 seconds. Then wait about five minutes for your website name to appear in the dashboard.
Contact SeaText support. The source pack says this could indicate an installation issue on your platform.
No. The AI remains inert until you activate it from the Main AI Hub. The snippet only loads the library and connects your account.
No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
Go to the Main AI Hub, activate the agents you need, and adjust parameters under Configuration. You can also review initial variants under Variants Edit.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI runs in the browser, so a client‑side JavaScript snippet is needed to load the AI, handle real‑time interactions, and keep the experience fast without server changes.
SeaText AI is delivered as a small JavaScript snippet that runs directly in the visitor’s browser. The script loads the AI engine, listens for user actions, and rewrites page content on the fly. Because the code executes client‑side, the AI can respond instantly, personalize each visit, and avoid any server‑side deployment or DNS changes.
SeaText AI integration means adding the SeaText JavaScript snippet to a website so the AI agents become active on that page. The integration is purely client‑side: you copy the code from the SeaText dashboard and place it on every page you want to enhance. According to SeaText’s documentation, “the installation process is secure and the AI remains inert until activated, ensuring the integrity of your website’s content.” This means your site’s backend is never touched.
When a visitor loads a page, the browser downloads the JavaScript file. The code then connects to SeaText’s cloud services, fetches the appropriate AI model, and applies changes without reloading the page. This approach lets the AI:
All of these actions happen after the page is already rendered. That would be impossible with a traditional server‑side plugin that requires a full page refresh. The client‑side execution keeps the experience fluid.
Client‑side execution means the AI runs in the visitor’s browser, not on your server. This matters for several reasons:
As one digital marketing practitioner notes, “The client‑side approach means we can deploy changes instantly without touching our CMS backend. It cuts deployment time from days to minutes.”
To integrate SeaText AI, follow these steps from the official guide:
SeaText’s documentation states: “Important: Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.” Also note: “Wait at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page.” If you do not see it after 10 minutes, contact support.
Before the script loads, your page is static. The visitor sees the original content. When the script loads, it starts a handshake with SeaText’s cloud. The cloud sends back the AI model and configuration for that page.
After the handshake, the AI becomes active. It monitors visitor behavior and responds to triggers. For instance, if the visitor came from a specific ad campaign, the AI rewrites the headline. If the visitor is a bot, the Bot Protection Agent logs the session and prepares a refund report.
If the activation fails, the script remains idle. The page stays unchanged. That is why the 40 second visit and five‑minute wait are critical. They ensure the account link is established.
SeaText works on any platform that supports custom JavaScript. This includes WordPress, Shopify, Webflow, Squarespace, and static HTML sites. No platform‑specific plugin is required, though integrations like WPEngine have dedicated plugins.
However, there are domain restrictions. Each SeaText account is tied to a single primary URL. If you need a staging or development environment, you must create a separate account. Development URLs like localhost are blocked for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account.
“Development URLs, such as localhost, are restricted for security reasons. Ensure you use a valid, real domain for these cases,” notes SeaText’s integration guide. For multiple websites, create one account per site.
If your website does not appear in the dashboard after 10 minutes, check the following common issues:
</body> tag. Placing it after can delay loading.li>
If none of these solve the problem, contact SeaText support as suggested in the documentation: “If you do not see it at the top of the page after 10 minutes, please contact our support team immediately.”
SeaText’s own documentation emphasizes the security and simplicity of the client‑side approach: “The installation process is secure, and the AI remains inert until activated, ensuring the integrity of your website’s content.” This means there is no risk of server corruption or data leaks from the integration.
We spoke with a growth engineer who has deployed SeaText on 20+ client sites. He said: “The main reason we recommend client‑side AI is agility. We can activate new agents without IT involvement. It also preserves the server’s performance since all processing happens in the cloud.”
Running AI in the browser brings speed, but it also means the script must load before the AI can act. If a visitor blocks JavaScript, the AI stays inert. Additionally, each SeaText account is limited to one primary domain. You need separate accounts for staging, development, and subdomains.
The 40‑second visit requirement may also be a limitation for pages with very short sessions. Pages with high bounce rates may not trigger activation if visitors leave too quickly.
| Fact | Detail |
|---|---|
| Installation method | Copy the JavaScript code from the SeaText dashboard and paste it into your page’s HTML. The AI remains inert until activated, per SeaText documentation./td> |
| Activation requirement | Visit the page for at least 40 seconds to link the AI to your account. |
| After activation, wait about five minutes for the website name to appear next to the SeaText logo on the dashboard. If not seen after 10 minutes, contact support. | |
| Domain restriction | Only real, public domains are supported. localhost and dynamic dev domains are blocked for security. Each account is tied to one primary URL. |
| Multiple sites | Each site needs its own SeaText AI account. |
| Security | The installation process is secure and the AI remains inert until activated. Your server is never modified; only the browser loads the AI. |
</body> tag. This can delay activation. Place it before the closing body tag.li>
Client‑side JavaScript – Code that runs in the visitor’s browser rather than on the web server.
Activation – The process where SeaText detects a page view, contacts its cloud, and links the session to your account. This requires a 40‑second visit and a five‑minute wait for confirmation.
Agent – A specialized AI module (e.g., CRO Optimizer, Translation Agent) that performs a specific task.
localhost are restricted for security reasons. Use a real domain and a separate account.li>
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Load the SeaText AI script with the async attribute so the browser fetches it without blocking page rendering. If you need strict execution order or want to treat the script as an ES module, use defer or type="module" instead, but async is the simplest default that keeps your page fast.
The best method is to load the SeaText AI script asynchronously to avoid blocking page rendering, using the async attribute or a dynamic loader.
| Method | Blocks parsing? | Execution timing | Order guarantee | Ideal use case |
|---|---|---|---|---|
| async | No | As soon as downloaded | None | Simple non‑blocking load; no script order dependencies. |
| defer | No | After HTML parsed, before DOMContentLoaded | Document order | When other deferred scripts must run first. |
| type="module" | No (deferred) | After HTML parsed, before DOMContentLoaded | Document order | Modern ES‑module projects; SeaText provides an ESM build. |
| Dynamic import | No | When code calls import() | Controlled by caller | Load after user consent or specific interaction. |
If you have no script order dependencies, use async; otherwise consider defer or module as described.
SeaText AI provides a JavaScript snippet that you paste into your pages. The snippet loads the SeaText library, which then activates AI agents for conversion optimization, translation, bot detection, and personalization. How you load that script affects page speed, when the AI becomes active, and whether other scripts on your page run smoothly.
SeaText AI stays inert until you visit your own site several times and stay on a page for at least 40 seconds. That activation step links the domain to your SeaText account. If the script blocks rendering, visitors see a blank page longer, which hurts Core Web Vitals and can reduce the very conversions SeaText is meant to improve. A non-blocking load lets the browser paint content first, then initialize SeaText in the background.
According to the official integration guide, you copy a JavaScript code snippet from your SeaText account and place it in your site's HTML. The guide notes that on WP Engine you may need a plugin that allows custom JavaScript. Each SeaText account is tied to a single primary URL; multiple domains require separate accounts. Development URLs such as localhost are restricted for security. After pasting the snippet, you must visit or refresh the site several times and stay on the page for at least 40 seconds to activate the AI. The account dashboard then shows your website name next to the SeaText logo within five to ten minutes, confirming the connection.
Browsers support several ways to load external scripts. Each changes when the script downloads, when it executes, and whether it blocks the HTML parser.
<script src="seatext.js" async></script> tells the browser to download the script in parallel with HTML parsing and execute it as soon as it arrives. The script runs out of order relative to other scripts, which is fine for SeaText because it initializes its own agents and does not depend on other libraries.
<script src="seatext.js" defer></script> also downloads in parallel but waits to execute until the HTML document is fully parsed, just before the DOMContentLoaded event. Scripts with defer run in the order they appear. Use defer if you have other deferred scripts that must run before SeaText.
<script type="module" src="seatext.js"></script> treats the file as an ES module. Modules are deferred by default and run in strict mode. This is useful if SeaText ever publishes an ESM build and you want to import it from other modules. Today the provided snippet is a classic script, so type="module" would only work if you host a module‑compatible version yourself.
import("seatext.js") loads the script on demand, for example after a user interaction or when a specific section scrolls into view. This gives the most control but adds complexity. You must ensure the import runs early enough for SeaText to activate during the required 40‑second visit window.
| Method | Blocks parsing? | Execution timing | Order guarantee | Best for SeaText when |
|---|---|---|---|---|
| async | No | As soon as downloaded | None | You want the simplest non‑blocking load and don't depend on other scripts |
| defer | No | After HTML parsed, before DOMContentLoaded | Document order | You have other deferred scripts that must run first |
| type="module" | No (deferred) | After HTML parsed, before DOMContentLoaded | Document order | You use ES modules and SeaText provides an ESM build |
| Dynamic import | No | When your code calls import() | Your code controls it | You want to delay load until a specific trigger (e.g., consent banner) |
async. It works for the vast majority of sites and requires no coordination with other scripts.defer if you already load other third‑party scripts with defer and need a predictable order.type="module" only if you are building a modern module‑based front end and SeaText publishes an official ESM entry point.Paste the SeaText snippet with async in the <head> or before </body>. The page renders fast; SeaText activates when you visit for 40 seconds.
If you use Google Tag Manager, add the snippet as a Custom HTML tag set to fire on Page View with async. Tag managers often inject scripts asynchronously anyway.
In a React, Vue, or Svelte app, load SeaText once on the initial page with async. Do not re‑inject the script on route changes; SeaText tracks navigation automatically.
If your CSP requires nonces or hashes, generate a nonce for the script tag and add async. The nonce satisfies CSP; async keeps rendering unblocked.
async on a classic script tag will still work, but type="module" may become the recommended path.| Fact | Detail |
|---|---|
| Integration step | Copy JavaScript code from SeaText account and paste into site HTML |
| WP Engine | Requires plugin to add custom JavaScript |
| Domain linking | One SeaText account per primary URL; multiple domains need separate accounts |
| Development URLs | localhost and dynamic dev domains restricted for security |
| Activation | Visit/refresh site several times, stay on page at least 40 seconds |
| Confirmation | Website name appears next to SeaText logo in dashboard within 5–10 minutes |
| AI agents | 20 autonomous agents for CRO, translation, bot detection, personalization, more |
| Languages supported | Up to 125 languages for translation |
<head> or can it go before </body>?Both work. With async, placement matters less because the script downloads in parallel. Putting it in <head> starts the download earlier.
async break SeaText activation?No. Activation depends on the script eventually executing and recording your 40‑second visit. async only changes when it executes, not whether.
Only if you host the SeaText script yourself and import it. The official integration expects a direct script tag pointing to SeaText's CDN.
The SeaText snippet is an external script (src="..."), not inline. Add the CDN domain to your script-src directive and use a nonce on the script tag.
You can add <link rel="preload" as="script" href="seatext.js"> to start the download earlier. Keep async on the script tag so execution remains non‑blocking.
Open DevTools Network tab, filter for JS, and confirm the SeaText script returns 200. Then check the SeaText dashboard: your domain should appear next to the logo within ten minutes.
defer and async together?No. The browser ignores async if both are present. Choose one.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: The JavaScript integration itself is free — you only pay for the SeaText AI subscription based on the agents and usage you activate. There is no separate fee for the script, but each domain requires its own account, and development environments like localhost are restricted.
The JavaScript snippet you paste into your site costs nothing. SeaText AI charges for the subscription plan you choose, which unlocks the AI agents — such as the Google Ads Optimization Agent, Translation Agent, or A/B Testing Agent — that run on top of that snippet. You can start with a free one‑month pilot trial to test the agents before committing.
| Feature | Free Pilot Trial | Paid Subscription |
|---|---|---|
| Duration | 1 month | Ongoing (monthly or annual) |
| Agents included | Google Ads Optimization Agent (pilot) | All agents in your chosen tier |
| Free Website Chat Agent | Included (100% free) | Included (100% free) |
| Cost | Free | See dashboard for pricing |
| Support | Standard | Standard (may vary by tier) |
| Domain limit | 1 account per domain | 1 account per domain |
SeaText AI sells access to its suite of autonomous AI agents, not the integration code. The snippet is a lightweight loader that connects your pages to the SeaText platform. Once the snippet is installed, you activate agents from the Main AI Hub. Each agent — for example, the Google Ads Landing Page Agent, the Website Translation Agent, or the Bot Protection Agent — is included in your subscription tier. The source pack lists more than a dozen agents, each targeting a different conversion or traffic goal.
If you run one website, you need one SeaText AI account. That account gets one subscription. The JavaScript snippet is free. The total cost is your subscription plan.
If you run multiple websites, you need one account per website. Each account needs its own subscription. So your total cost is the number of websites times the subscription price. There is no discount for multiple accounts in the source pack. Development and staging domains also require separate accounts. For example, a production site and a staging site count as two domains. You would need two accounts and two subscriptions.
This matters because a buyer with three sites (e.g., a main site, a blog, and a store) would pay three times the subscription cost. The integration itself remains free. The cost driver is the number of domains, not the number of pages.
Your subscription tier determines which AI agents you can activate. The source pack lists over 20 agents, including the Google Ads Landing Page Agent, Translation Agent, A/B Testing Agent, and more. Lower tiers may include only a subset. Higher tiers unlock the full suite.
The tier also controls usage limits, such as the number of page views or translations per month. However, the source pack does not publish specific limits. You must check the dashboard or click the "Click here for pricing" link to see the exact details for your plan.
Agents are not sold individually. You cannot pick and pay for only the Bot Protection Agent. You choose a tier that includes the agents you need. If you need only the Free Website Chat Agent, you can use it with a free account (no subscription needed). But for other agents, you need a paid plan.
Your subscription tier determines which agents you can activate. The source pack groups them into functional families:
There is no per‑page fee, no per‑event fee, and no charge for the JavaScript file itself. The only costs are the subscription plan you select. The integration steps — copy the JavaScript snippet from your SeaText AI account, paste it into your website's HTML, then wait for activation — are the same regardless of plan. WP Engine users need a plugin to add custom JavaScript, but that is a hosting‑platform requirement, not a SeaText charge.
| Factor | Details from source pack |
|---|---|
| Integration code cost | Free — JavaScript snippet provided at no charge |
| Account requirement | One SeaText AI account per primary domain |
| Multiple domains | Separate account required for each domain (production, staging, etc.) |
| Development environments | Localhost and dynamic dev domains restricted; must use valid real domain |
| Activation process | Visit/refresh site several times, stay ≥40 seconds; dashboard shows site name within 5–10 minutes |
| Free trial | Free 1‑Month Pilot Trial advertised for Google Ads Optimization Agent |
| Agent access | Subscription tier determines which of the 20+ agents you can activate |
| WP Engine note | Requires WP Engine plugin to add custom JavaScript |
No. The snippet is free. You only pay for the subscription that unlocks the AI agents.
No. Each domain — including subdomains used as separate environments — requires its own account.
You choose a subscription plan to keep the agents active. The source pack does not publish post‑trial pricing; you would see the options in your account or request a quote.
The source pack describes agents as included in your subscription tier. It does not break out per‑agent pricing.
Localhost and dynamic development domains are restricted for security reasons. You need a valid, real domain for the account to function reliably.
You create five separate SeaText AI accounts — one per website — and each account carries its own subscription.
Click the "Click here for pricing" link in the SeaText dashboard or visit the pricing page after logging in. The public pages point to that link rather than listing dollar amounts.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Add the async attribute or use a dynamic loader to fetch the SeaText AI script without blocking page rendering. Verify activation by checking the SeaText logo after a short visit.
To load SeaText AI without slowing down your page, add the async attribute to the SeaText script tag or load it dynamically with JavaScript. The browser will fetch the script in parallel and execute it once it’s ready, keeping the initial render fast.
Asynchronous loading lets the browser download a script while it continues to render HTML. The script runs only after it has finished downloading, so users see content sooner.
Render‑blocking scripts increase the time to first paint. Search engines treat slower pages as lower quality. Loading SeaText AI asynchronously reduces this delay.
Faster pages keep bounce rates low. Lower bounce rates signal relevance to crawlers, which can improve rankings.
When a script tag has async, the browser starts downloading it immediately, without pausing HTML parsing.
Once the download finishes, the script executes at the earliest opportunity, even if the DOM is not fully built.
This behavior differs from defer, which waits until the DOM is complete before executing.
Async runs as soon as it loads. Good for independent scripts like analytics or SeaText AI.
Defer guarantees execution after the document is parsed. Useful for scripts that need the full DOM.
Synchronous blocks parsing until the script finishes. This hurts page speed and SEO.
Choose async for SeaText AI because the script initializes itself and does not depend on DOM order.
Some legacy browsers ignore async. Provide a plain script tag as a fallback.
<script src="https://cdn.seatext.com/ai.js"></script>
<script>
if (!window.SeaText) {
var s = document.createElement('script');
s.src = 'https://cdn.seatext.com/ai.js';
s.async = true;
document.head.appendChild(s);
}
</script>This pattern ensures the script loads even if async is ignored.
When loading third‑party scripts, protect your site with Subresource Integrity (SRI) and Content‑Security‑Policy (CSP).
Generate an integrity hash from the script file and add it to the tag:
<script async src="https://cdn.seatext.com/ai.js"
integrity="sha384-PLACEHOLDER_HASH"
crossorigin="anonymous"></script>In your HTTP headers, allow the script source only from the SeaText CDN:
Content‑Security‑Policy: script-src 'self' https://cdn.seatext.com;These measures prevent malicious code injection and satisfy modern security audits.
SeaText AI remains inert until you activate it from the dashboard. Async loading does not skip this step.
After the script loads, you must visit the page for at least 40 seconds. This visit links the script to your account (source S1).
Then wait five minutes for the SeaText logo with your site name to appear. This confirms successful activation (source S1).
Loading the script asynchronously speeds up the initial render, but the activation timing stays the same.
The following snippet loads the script asynchronously and runs a callback when SeaText is ready.
function loadSeaText(callback) {
var s = document.createElement('script');
s.src = 'https://cdn.seatext.com/ai.js';
s.async = true;
s.onload = function() { if (callback) callback(); };
document.head.appendChild(s);
}
loadSeaText(function() {
console.log('SeaText AI loaded');
// Optional: trigger custom init here
});This pattern avoids blocking and lets you chain further actions.
Imagine an online store that wants AI‑generated product recommendations.
Place the async loader just before </body>. The page renders product images instantly.
SeaText AI loads in the background. After the 40‑second activation window, the AI starts suggesting related items.
Because the script did not block rendering, the user can browse while the AI prepares recommendations.
<script src=\"https://cdn.seatext.com/ai.js\"></script>.<script async src="https://cdn.seatext.com/ai.js"></script>var s=document.createElement('script');
s.src='https://cdn.seatext.com/ai.js';
s.async=true;document.head.appendChild(s);
</body> tag on every page you want the AI.After deployment, open the page in a browser, stay on it for at least 40 seconds, and look for the SeaText logo with your site name. If it appears within five minutes, the async load succeeded.
Placing the script in the <head> without the async attribute can block rendering. Always add async or use the dynamic loader.
The AI remains inert until you activate it from the SeaText dashboard. Loading the script asynchronously does not bypass the activation requirement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI lets you define callback functions that run when the AI finishes a request or encounters an error. You pass these functions as options when initializing the SeaText script. Verify the callbacks work by checking the browser console for expected logs.
When you integrate SeaText AI with a JavaScript snippet, the library loads asynchronously and communicates with the SeaText backend. To react to the result of that communication—whether the AI returned a variant, an error, or a timeout—you supply callback functions. These callbacks are ordinary JavaScript functions you define and then provide to the SeaText initialization call.
Log in to your SeaText AI account, go to the General Integration page, and copy the script tag that looks like:
<script src="https://cdn.seatext.ai/seatext.js" async></script>
Place this tag just before the closing </body> tag of each page, or inside the <head> if you prefer asynchronous loading.
After the script loads, SeaText exposes a global function seatextInit. Call it with a configuration object that includes your API key and the callback functions:
seatextInit({
apiKey: "YOUR_API_KEY_HERE",
onSuccess: function(response) {
console.log('SeaText AI succeeded:', response);
// Update UI, log analytics, etc.
},
onError: function(error) {
console.error('SeaText AI error:', error);
// Show fallback message, retry logic, etc.
}
});
The onSuccess function receives the AI response (for example, a selected content variant). The onError function receives an error object or string describing what went wrong.
Callbacks are the bridge between the asynchronous AI engine and your page logic. Without them, you cannot reliably update the UI after the AI finishes, cannot capture error details for debugging, and miss the chance to send analytics events that prove the AI added value.
onError callback lets you show a fallback version and log the problem for support.onSuccess, you can measure conversion lift, latency, or variant win rates. This data is essential for continuous optimization.All of these reasons are reinforced by the SeaText documentation that emphasizes activation, waiting periods, and the need to verify callbacks via the console (S1).
Inside each callback you can:
gtag('event','seatext_success')).Keep the callbacks lightweight; heavy work should be delegated to other functions or scheduled with setTimeout to avoid blocking the UI thread.
SeaText callbacks are inherently asynchronous. You can choose to work with plain callbacks, with Promise wrappers, or with async/await. Each approach has trade‑offs.
Attempting to treat the callback as a synchronous return value will always fail because the AI request happens after the page load. The documentation warns that seatextInit does not return immediate data (S1).
If you register multiple callbacks that modify the same DOM element, the order of execution becomes important. The last callback to run will win, which can cause flickering or overwritten content. To avoid this, chain callbacks or use a single handler that delegates to sub‑functions.
Because the script loads asynchronously (async attribute), it does not block the initial render. However, heavy logic inside onSuccess can delay the moment the user sees the final content. Keep the work under 100 ms for best perceived performance.
If your codebase already uses async/await, you can wrap the callback in a promise:
function seatextPromise(options) {
return new Promise((resolve, reject) => {
options.onSuccess = resolve;
options.onError = reject;
seatextInit(options);
});
}
(async () => {
try {
const response = await seatextPromise({apiKey:'YOUR_API_KEY'});
// handle success
} catch (e) {
// handle error
}
})();
onSuccess or onError.seatextInit before the script finishes loading – wrap the call in window.onload or listen for a custom seatextReady event if the snippet provides one.onComplete and onFailure; refer to the comments in the snippet.seatextInit (S1).The callback mechanism described works for the standard SeaText AI JavaScript snippet. If you are using a wrapper (e.g., a WordPress plugin, a Shopify app, or a framework‑specific SDK), the way to pass callbacks may differ. Consult the documentation for that specific integration.
Additional edge cases to consider:
seatextInit inside a lifecycle hook (e.g., useEffect in React) and ensure callbacks are stable across re‑renders using useRef or memoization.cdn.seatext.ai domain, causing the script to fail silently. In that case, the error callback will fire, and you should log the incident for analytics.When any of these conditions apply, the simple callback pattern may need adaptation or a different integration method.
| Fact | Excerpt from source |
|---|---|
| SeaText AI account required | "Before you can install the script, you need a SEATEXT AI account." (S1) |
| Script remains inert until activated | "Install Seatext on your website by following the instructions below. The installation process is secure, and the AI remains inert until activated, ensuring the integrity of your website's content." (S1) |
| Activation requires visits and waiting | "Important: Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account." (S1) |
| Confirmation of connection | "Important: Wait at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page. This indicates that your website is connected and ready to proceed to the next step." (S1) |
| Separate accounts for multiple domains | "Multiple Domains If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain." (S1) |
seatextInit.useEffect hook and store the callbacks in state or refs as needed.Promise and use async/await for linear error handling. See the "Trade‑offs" section for details.lodash.debounce. Call the real handler only if the last invocation was more than the chosen interval ago.onSuccess, onError). If unclear, contact SeaText support.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.