How to Confirm SeaText Is Active on Your Tilda Site After Installation

After you paste the SeaText script into Tilda, the install is done but the script is not active yet. To confirm it is active, publish the code, visit or refresh your live site several times, and stay on a page for at least 40 seconds. Then open the SeaText dashboard and wait up to five minutes. When your website name appears next to the SEATEXT logo at the top of that page, SeaText is active and connected to your account.

Before you start: what you need

Keep these four things ready before you install the code:

• A SEATEXT AI account. The integration page says: “Before you can install the script, you need a SEATEXT AI account. If you don't have an account yet, you can create one HERE.” Create the account first, then copy the code.
• The JavaScript snippet from the SeaText integration section. Each account shows its own code.
• A published Tilda site on a real domain. Localhost and dynamic development domains are restricted.
• One account per domain. Each SEATEXT AI account is linked to a single primary URL.

Step 1 — Install the SeaText script on Tilda

SeaText gives you two ways to add the script. Site-wide is the standard choice. Single page works when you only want the script on one URL.

Site-wide install

1. Open Site Settings in your Tilda dashboard.
2. Click More → HTML code for the head section → Edit code.
3. Paste the JavaScript code into the field labeled “Edit code inside HEAD tag”.
4. Save and publish your site.

Single-page install

1. Open the page you want in the Tilda dashboard.
2. Click the “+” icon to add a block.
3. Scroll down and select “Other”.
4. Choose the block named T123, which allows embedded HTML.
5. Click “Content” to open the HTML editor.
6. Paste the SeaText code snippet.
7. Click “Save and Close”, then “Publish”.

Step 2 — Activate the script from your live site

Publishing the code alone does not activate the AI. The script stays inert until it sees real visits on the public site.

Open your live website in a regular browser tab. Refresh the page several times. Stay on the page for at least 40 seconds. The integration guide is direct about this: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”

For the clearest result, do this on the public, published version of your site, not inside the Tilda editor preview.

Step 3 — Confirm the connection in the SeaText dashboard

The dashboard is the source of truth. After you have activated the script, wait at least five minutes. Then look at the top of the SeaText page for your website name next to the SEATEXT logo.

The integration guide says: “Wait at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page. This indicates that your website is connected and ready to proceed to the next step.”

Step 4 — Verify on the page itself

You can also check that the code is present in the page source. Right-click the live page and choose View Page Source, then search for “SEATEXT” or a unique part of the snippet inside the head section.

Page source proves the script is installed. It does not prove the script has linked to your account. Use the dashboard check for that.

Once you enable an agent, you can see its effect on live pages. A fresh incognito window is a simple way to view the page the way a new visitor sees it.

Common mistakes that make SeaText look inactive

• Not clicking Publish. Code that sits in the Tilda editor does nothing on the live site.
• Pasting into a normal HTML block for a site-wide install. Use the head tag field in Site Settings.
• Checking the dashboard before the activation visit. The script needs live page time first.
• Looking too early. The dashboard can take about five minutes to show your site name.
• Using localhost or a dynamic development domain. Those are restricted for security reasons.
• Using one account for two domains. Each primary URL needs its own account.
• Checking the wrong account if you manage several websites.

What “active” actually means

“Installed” and “active” are not the same thing. When the code is in Tilda's head tag, it is installed but inert. The SeaText integration guide states: “The installation process is secure, and the AI remains inert until activated, ensuring the integrity of your website's content.”

Active means the script has received visits on the live site and the dashboard shows your site name. It does not mean content has been rewritten. Content changes start only after you enable the agents you want to run.

Key facts about SeaText on Tilda

Area	What you need to know
Account	SEATEXT AI account required before installation.
Code	JavaScript snippet from the SeaText integration section.
Site-wide install	Paste the code into “Edit code inside HEAD tag” in Site Settings.
Single-page install	Use the T123 block and paste the code into its HTML editor.
Activation trigger	Visit or refresh the live site several times; stay on a page for at least 40 seconds.
Dashboard confirmation	Site name appears next to the SEATEXT logo within about five minutes.
Domains	One account per primary URL.
Restrictions	Localhost and dynamic development domains may not work.
Security	The AI stays inert until activated.

Limitations and when this advice does not apply

This guidance is specific to Tilda and to the standard SeaText install. It covers the normal case: one site, one account, one real domain.

• Multi-domain setups. If you use a development domain and a production domain, create separate accounts. Do not expect one dashboard to show both sites.
• Password-protected or staging areas. The script needs public, published pages to associate traffic with your account.
• No agents enabled. “Active” means connected, not rewriting. You still need to turn on the agents you want.
• Single-page installs. If you used the T123 block on one page, activation applies to that page only. Use the site-wide method if you want the whole site covered.

Terms you may see

• Head section or HEAD tag — the part of the page HTML that loads before visible content. SeaText's code goes here.
• Script snippet — the block of JavaScript code from your SeaText account.
• Activate — the moment the AI starts working after real visits on your live page.
• Inert — loaded but not doing anything until activation.
• Primary URL — the main domain linked to your SeaText account.

Frequently asked questions

How long does it take for my site name to show in the dashboard?

Plan on two waiting steps. Stay on your live page for at least 40 seconds to activate the script, then wait about five minutes before checking the dashboard.

Does the Tilda editor preview count for activation?

No. Use the public, published version of the site. The script needs live visits to activate and link to your account.

Do I need to install the code on every Tilda page?

No. The site-wide method in Site Settings adds the code to all pages. Use the T123 block only when you want a single page covered.

What if nothing appears after five minutes?

Check that you published the site, revisit the live page and stay for at least 40 seconds, confirm the domain is a real public domain, and make sure you are looking at the account linked to that domain.

Will SeaText rewrite my content right after activation?

No. The AI stays inert until activated, and content changes happen only after you enable the agents you want.

Do I need a separate account for a test domain?

Yes. Each SeaText account is linked to a single primary URL. Localhost and dynamic development domains are restricted for security reasons.

After confirmation — next step

Once the dashboard shows your site name, SeaText is active and ready for the next step: choose the agents you want and activate them. Keep the SeaText Tilda integration page handy, because it holds the code snippet, the install steps, and a link to pricing.

Further reading and comparison sources

These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.

• Tilda Help Center
• How Tilda Works │ Tilda Help Center
• Site Settings

How SeaText can help

SeaText gives you a clear way to confirm the installation worked. After the script activates, your website name appears next to the SEATEXT logo in the dashboard, so you do not have to guess whether Tilda accepted the code.

The SeaText Tilda integration page provides the exact JavaScript snippet, the correct head-code field for site-wide installs, and the T123 block method for single pages. It also explains the limits you should plan for: a SEATEXT AI account is required, each account is linked to one primary URL, and localhost or dynamic development domains are restricted. Expect to spend about 40 seconds on your live page and up to five minutes before the dashboard updates.