How to Use SeaText AI on Multiple Weebly Domains

Quick Answer: One Account Per Domain

SeaText AI links each account to a single primary URL. To use it on multiple Weebly domains, you must create a separate SeaText AI account for each domain. Then, for each site, copy the JavaScript snippet from that account's dashboard and paste it into the Weebly site's Footer Code section. After publishing, visit the site and stay for at least 40 seconds to activate the AI and link it to your account.

This setup ensures each domain gets its own AI instance. The AI reads your site content and responds to visitors based on that specific site's data. Sharing one account across domains would mix that data and break the AI's ability to provide relevant responses.

Why One Account Per Domain?

Each SeaText AI account is tied to one primary URL. This is a deliberate design choice for security and accurate traffic attribution. If you tried to use one account across multiple domains, SeaText couldn't reliably associate traffic with the right site, and the AI wouldn't function correctly.

The one-account-per-domain rule also affects how you track results. Each account maintains its own analytics, so you can see which domain gets the most AI-driven conversions without data mixing. This separation matters if you run different types of sites—one might be a blog, another an ecommerce store, and a third a service landing page.

From a security standpoint, isolating each domain to its own account limits the blast radius if one account is compromised. The other domains stay protected because they use separate credentials and API keys.

This means the process is not "add a domain to your existing account." Instead, you repeat the full setup for each domain. It's more work upfront, but it keeps each site's data and AI behavior separate.

Step-by-Step: Set Up SeaText AI on Multiple Weebly Domains

Before You Start

• Have a SeaText AI account for each domain. If you don't have accounts yet, create them first.
• Make sure each domain is a real, valid domain. Development URLs like localhost are restricted for security reasons.
• Dynamic development domains may not work properly because SeaText may not be able to reliably associate traffic with your account.

Step 1: Get the JavaScript Code for Each Domain

Log in to the SeaText AI account for your first domain. Find the JavaScript code provided on your account page. Copy it. You'll need a different code for each domain, so repeat this for each account.

The code is unique to each account. If you accidentally paste the wrong code, the AI won't activate. Double-check that the code matches the domain you're setting up.

Step 2: Access Your Weebly Site Editor

Log in to your Weebly account. Navigate to Website > Edit Site in the left-hand menu. Select the project you want to set up and click the Edit button to enter edit mode.

Make sure you're editing the correct site if you manage multiple Weebly projects. The site selector is usually at the top left of the Weebly dashboard.

Step 3: Find the Footer Code Section

In the Weebly edit mode, click on Settings. Then, access the SEO section. Look for the Footer Code field.

The Footer Code section accepts custom HTML and JavaScript. This is where SeaText AI's script needs to live so it loads on every page of your site.

Step 4: Paste the JavaScript Snippet

Paste the JavaScript snippet from your SeaText AI account into the Footer Code section. Make sure you paste the correct code for the domain you're working on.

Don't add any extra text or formatting around the code. Paste it exactly as provided. Extra characters can break the script.

Step 5: Save and Publish

Click Save, then Publish. This makes the code live on your site.

Don't skip the Publish step. Save alone won't push the changes to your live site. Visitors won't see the AI until you publish.

Step 6: Activate the AI

Visit or refresh your website several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account.

The 40-second rule is important. SeaText AI needs to see a sustained visit to confirm the connection. A quick bounce won't count. Stay on the page, scroll, and interact if you can.

Step 7: Verify the Connection

Wait at least five minutes. Then, check the top of your SeaText AI account page. You should see your website name displayed next to the SEATEXT logo. This confirms the site is connected.

If you don't see it after 10 minutes, contact SeaText support. This could indicate an installation issue.

Step 8: Repeat for Each Additional Domain

Repeat steps 1 through 7 for each additional Weebly domain. Use a separate SeaText AI account and a separate JavaScript snippet for each one.

Keep a spreadsheet or checklist as you go. Note which account and code go with which domain. This prevents mix-ups when you have three or more sites.

Common Mistakes to Avoid

• Using one account for multiple domains: This won't work. Each account is linked to a single primary URL.
• Using development or localhost URLs: These are restricted for security reasons. Use real, valid domains.
• Skipping the activation step: You must visit the site and stay for at least 40 seconds. Otherwise, the AI won't activate.
• Not waiting for verification: The website name may not appear immediately. Wait at least five minutes before checking.
• Pasting the wrong code: Make sure you paste the JavaScript snippet from the correct account for the correct domain.
• Forgetting to publish: Save alone doesn't go live. Always click Publish after pasting the code.

What to Do After Setup

Once your site is connected, proceed to the Main AI Hub to activate the necessary AI on your preferred pages. Click on Configuration to adjust the AI parameters. You can also do optional editing to fine-tune how the AI works on your site.

Remember, each domain has its own account, so you'll need to configure the AI separately for each site.

This separate configuration lets you tailor the AI behavior to each domain's audience. A B2B site might need different AI responses than an ecommerce store. Keep that in mind when setting up each account.

Check the AI's performance after a few days. Look at the analytics in each SeaText AI account. If one domain isn't getting the expected engagement, review the AI settings and adjust them.

You can also set up the AI on specific pages only. Not every page needs the AI. Focus on high-traffic pages like your homepage, product pages, and contact page.

Limitations and When This Doesn't Apply

This one-account-per-domain rule applies to all SeaText AI usage, not just Weebly. If you have a single domain with multiple subdomains, you'll need to check with SeaText support about whether subdomains count as separate domains.

Dynamic development domains may not function properly. If you're testing on a staging site with a changing URL, SeaText might not be able to reliably associate traffic with your account. Use a stable, real domain for testing.

If you're managing many domains, the setup process can be time-consuming. Plan to allocate time for each domain's individual setup and verification.

The 40-second activation requirement also means visitors who bounce quickly won't trigger the AI. This is by design—it ensures the AI only activates for genuine visitors who spend time on your site.

SeaText AI may not work with Weebly sites that use custom SSL certificates or unusual DNS configurations. If your site has a non-standard setup, test the AI on a staging environment first.

The AI's effectiveness depends on your site's content. If your pages have very little text, the AI may not have enough material to work with. Make sure your site has substantial content before expecting strong results.

Frequently Asked Questions

Can I use one SeaText AI account for multiple Weebly domains?

No. Each SeaText AI account is linked to a single primary URL. You must create a separate account for each domain.

What if I have a development domain and a production domain?

Create separate accounts for each. Development URLs like localhost are restricted, so use real, valid domains.

How long does it take for the AI to activate?

You need to visit or refresh your site several times and stay for at least 40 seconds. Then, wait at least five minutes to see your website name appear in your SeaText account.

What should I do if my website name doesn't appear after 10 minutes?

Contact SeaText support immediately. This could indicate an installation issue on your platform.

Do I need to configure the AI separately for each domain?

Yes. Each domain has its own account, so you'll need to activate and configure the AI separately for each site.

Can I use a subdomain as a separate domain?

This isn't specified in the official documentation. Check with SeaText support to confirm whether subdomains require separate accounts.

Is the installation process secure?

Yes. The installation process is secure, and the AI remains inert until activated, ensuring the integrity of your website's content.