See how this page can help with your next step.
Direct Answer: Paste the SeaText JavaScript snippet into your Shopify theme.liquid file, activate the AI in your SeaText account, and verify the logo appears. The whole process takes under a minute.
To add SeaText AI to Shopify, copy the SeaText JavaScript snippet and paste it into your theme.liquid file. Save the file, visit your store, and activate agents in the SeaText Main AI Hub. The whole process takes under one minute when your account and domain are ready.
SeaText AI adds autonomous agents to the storefront you already have. You do not need to build new pages. You do not need to change your Shopify theme. The agents work with the existing theme and existing product content. This matters because most stores already have high-value pages. SeaText lets those pages adapt to each visitor.
The SeaText homepage lists 20 autonomous agents. Each agent does a different job. One agent rewrites headlines, offers, and calls to action. Another agent detects bot traffic and creates refund reports. Another agent translates content into 125 languages. These agents can help a Shopify store improve conversion rate, recover wasted ad spend, and reach international customers.
For Shopify specifically, the installation point is the same for every agent. A single script gives every agent access to your storefront. This is simpler than installing separate apps for translation, testing, and personalization. It also keeps control in one place: the Main AI Hub.
Practical examples: a Shopify store running Google Ads can use the Google Ads agent to make landing pages match search keywords. A store that sells across borders can use the translation agent. A store with many product pages can use the ecommerce product copy agent. All of them are activated after the same install.
On Shopify, SeaText AI is delivered with a JavaScript snippet. The snippet goes in the layout/theme.liquid file before the closing </head> tag. theme.liquid is the main layout file for the theme. It wraps every page in the store. Placing the snippet there means the script loads on the whole site.
The snippet stays inert until you activate it. SeaText says the installation process is secure and the AI remains inert until activated. This is an important safety detail. You can install the code first and activate agents later, and the store content will not change in the meantime.
Activation happens in the Main AI Hub. This is the SeaText dashboard where you turn on agents. You also use the Configuration button to adjust AI parameters. You do not need to edit Shopify after that.
Once an agent is active, SeaText reads visitor context. It can look at the campaign, keyword, and referral source. Then it can rewrite product blocks, offers, CTAs, and page copy to match the context. On a Shopify product page, that can make the page feel like it was built for one search term.
Do not use localhost. SeaText restricts development URLs such as localhost for security reasons. A local URL cannot be linked to an account reliably. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with the account.
If you plan to use a development domain and a production domain, create separate SeaText accounts. Each account is connected to one primary URL. This is not an optional preference. It is a restriction in the source instructions.
layout/theme.liquid.</head> tag.Use the layout/theme.liquid file, not a page template. theme.liquid controls the whole store. If you paste into a product template only, the script may not load on your homepage or collection pages.
After activation, you can review the initial translations and variants. The source says SeaText provides an initial round of automatic translations and variants for testing. In the SeaText dashboard, open Variants Edit in the left panel. Select the URL and language you want to edit.
After saving the file, go to your live storefront. Visit or refresh the website several times. Stay on the page for at least 40 seconds. This visit helps SeaText activate the AI and link it to your account.
Make sure the domain you visit matches the primary URL on your SeaText account. If you visit a different domain, the activation visit does not link correctly.
Then wait at least five minutes. The source says you should wait until you see your website name next to the SEATEXT logo at the top of the page. That logo is the visual confirmation that the connection is active.
If the logo does not appear after 10 minutes, contact SeaText support. The source says this could indicate an installation issue. Do not assume the script is working just because the page loads.
Remember that the script and the agents are different. The script loads silently. Agents must be activated in the Main AI Hub. Verification is complete only when the logo appears and the agents are active.
The first limitation is the domain rule. Each SeaText account is tied to one primary URL. If you need to use SeaText AI on another domain, create another account. This applies whether the domain is a staging copy or a second store.
The second limitation is localhost support. SeaText does not support localhost. Development URLs are restricted. Dynamic development domains may not function. Use a real public domain for the store.
The third limitation is activation. The AI will not do anything until you activate it in the Main AI Hub. If you only paste the script and close the editor, the store may look identical to a store without SeaText. That is normal.
Common scenarios and how to fix them:
</head> tag, the file was saved, and the domain is public.Open layout/theme.liquid and paste the snippet just before the closing </head> tag. Save the file.
No. SeaText restricts localhost and development URLs for security reasons. Use a valid public domain.
No. Each SeaText account is linked to a single primary URL. Create a separate account for each domain.
Visit your store for at least 40 seconds, then wait at least five minutes. If the logo still does not appear after 10 minutes, contact support.
Yes. Open the Main AI Hub and activate the agents you want. The AI stays inert until activation.
Dynamic development domains may not work. Use the real production domain for the store.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI has no separate installation fee; you pay a subscription plan. Setup is adding a script, activating agents, and confirming the site connects. The main cost drivers are the plan, one account per domain, a valid real domain, and configuration time.
SeaText AI has no separate installation fee. You pay a subscription plan, and the setup work is adding a JavaScript snippet, activating the agents you want, and checking that your site connects. The real question is not 'what does the installer charge' but 'which plan fits your site and how many domains do you need.'
SeaText AI treats installation as a technical step, not a service. The company provides the script and instructions at no extra cost. The reason is simple: the value is in the ongoing AI agents, not in the one-time setup. The installation process is secure and the AI remains inert until you activate it. This means you are not paying for any content changes during installation. The subscription is the only recurring cost. The pricing page is the place to check exact plan amounts. Installation is a self-service task that takes under a minute to add the script, then a few minutes to activate. No hidden fees exist in the documentation. This is common for SaaS tools that rely on a simple code snippet.
The 'installation cost' is not a line item on the invoice. The recurring subscription is the main cost, and a few setup conditions can add accounts or time.
Understanding the account-per-domain rule helps you budget. The table below shows common setups and their cost implications.
| Scenario | Accounts needed | Cost driver |
|---|---|---|
| One production website, no staging | 1 account | One subscription plan |
| One production site + one staging site | 2 accounts (one per domain) | Two subscriptions or a plan that covers multiple domains (check with vendor) |
| Two separate brand websites | 2 accounts | Two subscriptions |
| Multi-language site on same domain | 1 account (same primary URL) | One subscription, translation agent included |
| Testing on localhost is not allowed | 0 (cannot use localhost) | Must use a real domain, which may add cost if not owned |
Each account requires its own subscription plan. If you have multiple domains, the total cost is the sum of plan fees. Check the pricing page to see if plans allow multiple accounts or if you need separate subscriptions. Development domains like localhost are restricted, so you must use a real domain even for testing.
The available documentation describes installation as a secure script add, not a separate paid service. The AI remains inert until you activate it, so you are not paying for content changes during installation. The subscription is the recurring part; setup is the work of connecting your site and switching on the agents you need.
If the site does not connect after following the steps, use this checklist. It covers common issues from the documentation.
| Item | What SeaText AI says |
|---|---|
| Installation security | The installation process is secure, and the AI remains inert until activated. |
| Account requirement | Before installing the script, you need a SeaText AI account. |
| Domain rule | Each account is linked to a single primary URL. For multiple domains, create separate accounts. |
| Development URLs | localhost and dynamic development domains are restricted or may not function reliably. |
| Activation | Visit or refresh pages and stay for at least 40 seconds to activate the AI. |
These conditions are easy to miss, and missing them changes your budget and timeline.
Before you buy, map the setup the same way you would scope any software deployment.
No. SeaText AI is subscription-based, and the setup documentation covers account creation, adding the script, and activating agents. There is no separate installation fee listed; the pricing link is for plans.
A SeaText AI account and the JavaScript code from the integration page. If you don't have an account, you can create one before starting.
No. Each account is linked to a single primary URL. You must create separate accounts for each domain, including development and production domains.
No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
The homepage says you can add Seatext to your site in under 1 minute. Then you need to refresh the site, stay for at least 40 seconds to activate the AI, and wait for the site name to appear next to the SeaText logo.
If you don't see your website name next to the SeaText logo within 10 minutes, contact support immediately. It may indicate an issue with the installation on your platform.
The available documentation does not list hidden installation fees. The cost drivers are the plan, the number of accounts you need for separate domains, and the time your team spends on activation and optional editing.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: This guide explains why correct SeaText AI installation is critical for conversion optimization, details the activation handshake, and walks through the most frequent errors — wrong API key, misplaced script, cache issues, unsupported domains, and multi‑domain confusion. It provides step‑by‑step correct installation, platform‑specific notes for WP Engine, troubleshooting checks, and answers to real follow‑up questions.
Installing SeaText AI correctly is the first step to unlocking autonomous AI agents that rewrite headlines, match ad keywords, translate content into 125 languages, and recover wasted ad spend. A single mistake — such as pasting the wrong API key or placing the script in the wrong tag — keeps the AI inert, so you lose conversion tracking, keyword‑level personalization, and bot‑refund evidence. This article shows why each mistake matters, how the activation handshake works, and how to verify success.
| Requirement | Detail | Source |
|---|---|---|
| Script location | Paste the JavaScript snippet before the closing </head> tag on every page. | S1 |
| API key | Copy the key from the exact SeaText account created for the target primary domain. | S1 |
| Activation wait | Wait at least 5 minutes after first page load; the SeaText logo with your site name appears at the top when linked. | S1 |
| Domain rule | One SeaText account per primary URL; localhost and temporary URLs are blocked. | S1 |
| WP Engine | Requires the dedicated WP Engine plugin to inject custom JavaScript. | S1 |
| Cache clearing | Purge browser, server, and CDN caches after adding the script. | S1 |
SeaText AI deploys 20 autonomous agents that optimize conversion rates, rewrite landing pages per keyword, detect bot traffic, and translate pages. If the installation script fails to load or authenticate, none of these agents activate. You lose real‑time headline rewrites that match each paid click, you forfeit bot‑refund reports that can recover up to 20% of ad spend, and you miss multilingual expansion that drives 25% more international conversions. A correct install ensures the AI becomes active within minutes and starts improving every visitor journey.
After the script loads, SeaText performs a handshake with your account. The script sends the API key to SeaText servers, which verify the key matches the registered primary domain. Once verified, the server returns a token that enables the AI agents. The handshake completes when you visit or refresh the page and stay for at least 40 seconds. The visual confirmation is the SeaText logo with your site name appearing at the top of the page. This logo signals that the script is linked and agents are ready for activation in the Main AI Hub.
The API key is a secret token that binds the script to a specific SeaText account. If you copy a key from a different account — for example, a staging account used for another domain — the handshake fails. The script loads but remains inert; no logo appears, no agents activate, and conversion tracking stays at zero. Always open the Account Settings page of the exact account created for the target primary domain, copy the key, and paste it into the script snippet before deployment.
SeaText’s JavaScript must load early so it can intercept page rendering and rewrite content before the visitor sees it. Placing the snippet at the bottom of <body>, inside a footer widget, or in a conditional CMS block that loads after the main content causes the AI to miss the activation window. The script then cannot rewrite headlines, swap offers, or inject translation layers. Insert the snippet directly before the closing </head> tag on every page template.
After you add the script, browsers, server‑side caches, and CDN edge nodes may continue serving the old HTML without the snippet. Visitors see the unchanged page, the handshake never starts, and the logo never appears. Clear your browser cache, purge any server‑side page cache (e.g., Varnish, Nginx fastcgi cache), and invalidate CDN edges (Cloudflare, CloudFront, Akamai). Then revisit the page and wait the required 5 minutes.
SeaText blocks development URLs such as localhost, 127.0.0.1, and dynamic preview domains for security reasons. If you test on a local server, the handshake is rejected and the AI stays inactive. Each primary domain (e.g., example.com and shop.example.com) requires its own SeaText account and API key. Reusing a single account across development and production domains causes mismatched traffic data and activation errors. Create a separate account for each primary URL you want to optimize.
</head> tag.If the logo does not appear after 10 minutes:
401 Unauthorized (wrong API key) or script blocked by CSP.View Page Source) inside <head>.The standard installation assumes you can edit the <head> of your pages. Platforms that lock down script injection (some SaaS builders, Wix, Squarespace) may require a dedicated SeaText app or plugin. WP Engine users must use the WP Engine plugin mentioned in the integration guide; the standard header edit is not available on that host. For single‑page applications (React, Vue, Angular), ensure the snippet loads on the initial HTML payload, not only on client‑side navigation, or use the SeaText SPA integration method described in the developer docs.
<head>, purge all caches, and ensure you are on a real primary domain (not localhost). If all checks pass, contact SeaText support.</head> tag and purge caches. The AI will reactivate on the next visit.These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Add SeaText AI to a Wix site by embedding the JavaScript snippet with Wix’s HTML element or by injecting the script through a custom Wix app, then activate the AI and verify the connection. The guide covers why SeaText matters for Wix owners, how the integration works, a side‑by‑side comparison of the two installation routes, preparation steps, detailed instructions, troubleshooting tips, and what to expect after activation.
You can add SeaText AI to Wix by pasting the provided JavaScript code into a Wix HTML embed element, or by injecting the same script through a custom Wix app you build yourself. Both methods load the SeaText script asynchronously and require a live, public domain. (Source: S1)
| Criterion | HTML embed | Custom Wix app |
|---|---|---|
| Setup effort | Low – copy‑paste the snippet into the editor | Medium – create a small app in the Wix Developer Console and add the script there |
| Flexibility | High – works on any page or site section | Medium – limited to the app’s scope and permissions |
| Control over placement | Full – you decide exactly where the embed sits | Partial – the app decides where the script loads |
| Verification | Check for SeaText logo after 5 min on the live page | Same verification step |
| Official marketplace | Not applicable | Not listed in the Wix App Market; you must build it yourself (Source: S1) |
Recommendation: If you want the fastest, most transparent setup and full control over where the script runs, choose the HTML embed. Use a custom Wix app only if you already maintain a Wix app for other reasons and prefer to keep all third‑party scripts inside that app.
SeaText AI deploys up to 20 autonomous agents that rewrite headlines, offers, and calls‑to‑action in real time, translate every page into 125 languages, detect and document bot clicks for ad‑spend refunds, and match landing‑page copy to the exact Google Ads keyword that brought the visitor. (Source: S2, S3, S5, S7) For a Wix site owner this means higher conversion rates without building new pages, automatic multilingual reach, and a tool to reclaim wasted ad budget.
SeaText provides a single JavaScript snippet that loads the AI engine asynchronously. When the snippet runs on a live page, it contacts SeaText’s servers, registers the domain to your SeaText account, and begins the activation sequence. The script stays inert until a visitor stays on the page for at least 40 seconds, after which the AI activates and the SeaText logo appears in the dashboard. (Source: S1)
The HTML embed is a native Wix element (+ Add → Embed → Custom Embeds → HTML iframe) that accepts raw HTML/JS. It requires no developer account and works instantly after publishing. A custom Wix app is built in the Wix Developer Console, packaged as a Wix CLI project, and installed on the site. It gives you a centralized place for multiple scripts but adds build and deployment steps. Choose the embed for simplicity; choose the app only if you already manage a Wix app and want unified script governance.
wix create app).backend or public file that injects the SeaText snippet into the page head using the Wix wixWindow API.wix deploy) and install it on the target site from the Wix Dashboard.script tags inside an HTML iframe. Use the HTML iframe element (not the plain Embed Code element) which allows scripts.www vs. non‑www). Create a separate account for each variant. (Source: S1)Once the logo appears, the AI agents become active. The CRO Optimizer starts A/B testing headline and CTA variants, the Translation Agent serves content in up to 125 languages, the Google Ads Agent rewrites landing‑page copy to match each paid keyword, and the Bot Protection Agent logs suspicious clicks and builds refund‑ready reports for Google, Meta, TikTok, and Reddit. You can then open the SeaText dashboard, go to Configuration to enable or tune individual agents, and review variant performance under Variants Edit. (Source: S2, S3, S5, S7)
SeaText AI works only on fully qualified, public domains. Development URLs such as localhost or dynamic preview URLs are blocked for security. Each SeaText account is tied to a single primary URL; multiple domains require separate accounts. The script loads asynchronously and is designed to be lightweight, but very heavy pages may see a marginal load‑time impact. (Source: S1)
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Install SeaText AI on Next.js by adding the provided JavaScript snippet to your root layout or _app file, then verify the connection by visiting your live domain for at least 40 seconds and waiting up to 10 minutes for the dashboard to show your site name. Localhost and dynamic preview URLs are blocked, so you must use a real domain.
You can install SeaText AI on Next.js by adding the SeaText snippet to your root layout in App Router or to pages/_app.js in Pages Router with next/script, deploying to a real domain, and then activating agents in the SeaText dashboard.
You need an active SeaText AI account. If you don't have one, create it at the SeaText signup page before touching any code. Each SeaText account is locked to a single primary URL, so if you run staging and production on different domains you will need separate accounts for each.
SeaText blocks development URLs such as localhost and dynamic preview domains for security reasons. You must install the script on a real, publicly resolvable domain. If you only have a preview deployment, promote it to a custom domain first.
Log in to your SeaText dashboard and copy the integration code shown in the General Integration section. The snippet is a small <script> tag that loads the SeaText runtime. Do not modify the code; paste it exactly as provided.
Open app/layout.tsx (or .js if you use JavaScript). Inside the <head> component, insert the SeaText script using next/script with the strategy="afterInteractive" option. The afterInteractive strategy tells Next.js to load the script after React hydration completes. This ensures the script runs when the page is fully interactive, without blocking the initial render.
import Script from 'next/script'
export default function RootLayout({
children,
}: {
children: React.ReactNode
}) {
return (
<html lang="en">
<head>
<Script
id="seatext"
strategy="afterInteractive"
dangerouslySetInnerHTML={{
__html: `/* paste the exact SeaText snippet here */`
}}
/>
</head>
<body>{children}</body>
</html>
)
}If your project still uses pages/_app.js, import next/head and place the script inside <Head>. The same afterInteractive strategy applies via next/script.
import Head from 'next/head'
import Script from 'next/script'
export default function MyApp({ Component, pageProps }) {
return (
<>
<Head>
<Script
id="seatext"
strategy="afterInteractive"
dangerouslySetInnerHTML={{
__html: `/* paste the exact SeaText snippet here */`
}}
/>
</Head>
<Component {...pageProps} />
</>
)
}Push the change to your hosting provider (Vercel, Netlify, AWS, etc.) and ensure the deployment is reachable at a stable domain such as https://www.example.com. Preview URLs that change on every deploy will not work because SeaText cannot reliably associate traffic with your account.
Visit your live site in a browser. Stay on the page for at least 40 seconds. This dwell time triggers the initial handshake between the SeaText script and your account. Refresh the page a few times if needed.
Return to the SeaText dashboard. Within five minutes you should see your website name appear next to the SeaText logo at the top of the page. If it does not appear after 10 minutes, contact SeaText support — this usually means the script failed to load or the domain restriction blocked the connection.
Once the site shows as connected, open the Main AI Hub in the dashboard. Activate the agents you need (CRO Optimizer, Google Ads Agent, Translation Agent, etc.). Click "Configuration" on each agent to adjust parameters such as target languages, testing intensity, or bot‑detection sensitivity.
If the dashboard does not show your site after 10 minutes, check the browser console for errors. Common issues include a missing or incorrect Content Security Policy (CSP) that blocks the SeaText script. Add script-src 'self' https://cdn.seatext.com; to your CSP if you have one.
Another frequent problem is using a dev server or a preview URL that changes with every deploy. SeaText requires a stable, real domain. Even if you use a subdomain like staging.example.com, it must be a permanent URL.
Also verify that the script tag appears in the rendered HTML. View the page source and search for "seatext". If it is missing, check that you added the code correctly in the layout or _app file.
Once the script is live on your domain, it remains inert until you activate agents in the dashboard. The script does not modify any content on its own. It only loads the SeaText runtime and waits for instructions.
After you activate agents, the script begins collecting visitor behavior data. It tracks page views, dwell time, and scroll depth. This data helps agents decide how to rewrite content for each visitor.
SeaText agents then rewrite headlines, CTAs, and offers in real time. They do not create new pages. They change the existing page content based on the visitor's source and intent.
Both App Router and Pages Router support SeaText installation. The main difference is the file you edit. App Router uses app/layout.tsx. Pages Router uses pages/_app.js.
App Router is the newer approach in Next.js 13 and later. It gives you more control over the <head> element. Pages Router is still fully supported and works identically for SeaText.
If you are starting a new project, use App Router. It is the recommended way by Next.js. If you maintain an existing project with Pages Router, you do not need to migrate. SeaText works the same in both.
One trade-off: App Router allows you to use TypeScript out of the box. The code example above uses TypeScript, but you can also use plain JavaScript. Pages Router often uses JavaScript, but TypeScript is also supported.
next/script with afterInteractive in either case.script-src 'self' https://cdn.seatext.com; (or the domain shown in your snippet) to allow the script to execute.dangerouslySetInnerHTML approach avoids type errors; alternatively, host the snippet as a static file in public/ and reference it with src="seatext.js".afterInteractive strategy ensures it runs after the page is ready.<head> of the live page (view source).| Fact | Detail |
|---|---|
| Account‑to‑domain mapping | One SeaText account = one primary URL |
| Localhost allowed? | No — restricted for security |
| Dynamic preview domains | May not function properly |
| Activation dwell time | At least 40 seconds on page |
| Dashboard confirmation delay | Up to 10 minutes |
| Multiple websites | Require separate accounts |
No. SeaText blocks localhost and similar development URLs. You must use a real domain, even a temporary staging subdomain.
Yes. Each distinct domain requires its own SeaText account because the account is tied to a single primary URL.
In app/layout.tsx inside the <head> component, wrapped in next/script with strategy="afterInteractive".
Check the browser console for script load errors, verify your CSP allows the SeaText domain, and ensure you are on a real domain. Then contact SeaText support.
Yes. The SeaText script runs entirely in the browser, so middleware and edge functions do not interfere.
No. SeaText rewrites content client‑side after the page loads. SSR of AI‑generated variants is not available.
The snippet loads the latest runtime from SeaText's CDN automatically. You only need to replace the snippet if SeaText instructs you to change the loader code.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: You can install SeaText AI on a Vue website by adding the provided JavaScript snippet to your index.html file. After adding the script, refresh your site and stay on the page for at least 40 seconds to activate the AI. Within 5 minutes, your domain will appear in the SeaText dashboard, confirming the connection.
SeaText AI adds 20 autonomous agents to your Vue SPA. These agents work in real time to improve conversions. They rewrite headlines and CTAs to match each visitor's search keyword. They translate content into 125 languages. They detect bot clicks and build refund reports for Google and Meta. All this happens without slowing your site.
The script loads from your index.html file. It sits in the tag. As soon as a visitor arrives, the AI activates. It reads the current URL and visitor source. Then it adapts the page copy. For a Vue app, this means every route change triggers a new adaptation. The AI works with Vue Router because it watches the URL.
After activation, your domain appears in the SeaText dashboard. You can then enable the agents you need. The whole process takes under 1 minute to install.
Before you start, make sure you have:
index.html file (usually located in the public/ folder for Vue CLI projects, or the root of the project for Vite).Log in to your SeaText AI account. Navigate to the General Integration section (or the script area). Copy the JavaScript code provided. This code is unique to your account and must be placed on your website.
For a Vue single-page application (SPA), the simplest and most reliable method is to add the script to the <head> of your index.html file. This ensures the AI loads on every page of your app.
public/index.html (or index.html at the root for Vite projects).<head> tag, just before the closing </head>.Alternative method for dynamic script injection: If you prefer to use a Vue plugin or lifecycle hook, you can inject the script using document.createElement('script') inside the mounted() hook of your root component. However, this may cause the AI to load slightly later. The index.html method is recommended for most cases.
After adding the script, deploy your changes to your live domain. Then:
When you visit your Vue site after adding the script, the following happens:
index.html head. It runs asynchronously, so it does not block page rendering.For Vue SPAs, each route change does not reload the script. The AI watches the URL via the popstate event and adapts content for each new route. This means one script installation covers all your pages.
If your domain does not appear after 10 minutes, check these common failure signals:
seatext.com or similar. If you see none, the script is not loading. Check that the script is in the <head> and not inside a Vue component template.index.html.Go back to your SeaText AI dashboard. Look for your website name next to the SeaText logo at the top of the page. This may take up to 5 minutes. If you don't see it after 10 minutes, contact SeaText support — there may be an issue with the installation.
Once the domain is connected, proceed to the Main AI Hub. Activate the agents you want (e.g., CRO Optimizer, Google Ads Agent, Translation Agent). You can configure each agent's parameters from the Configuration menu.
<template>: The script must be in the <head> of the HTML file, not inside a Vue component template.| Fact | Details |
|---|---|
| Installation time | Under 1 minute to add the script. |
| Activation trigger | Refresh your site several times and stay on the page for at least 40 seconds. |
| Domain verification | Your domain appears in the dashboard within 5 minutes. |
| Multiple websites | Each domain requires a separate SeaText account. |
| Supported platforms | Works on any website that can host a JavaScript snippet, including Vue, React, WordPress, and static sites. |
| Security | The AI remains inert until activated — it does not modify your site until you authorize it. |
This guide assumes you are using a standard Vue CLI or Vite project. If you are using a custom build process or a server-side rendered Vue app (e.g., Nuxt), the installation method may differ. For Nuxt, you can add the script to the nuxt.config.js under the head property. For dynamic development domains (like those generated by Gitpod or CodeSandbox), SeaText may not reliably associate traffic with your account — use a stable staging domain instead.
SeaText does not support localhost or IP-based URLs. You must use a valid, publicly accessible domain.
Yes. Because the script is added to the index.html file, it loads on every page regardless of Vue Router. The AI reads the current URL and adapts content accordingly.
There is no official Vue plugin, but you can create a simple plugin that injects the script in the mounted() lifecycle. However, the index.html method is simpler and more reliable.
Open your browser's developer tools (F12) and go to the Network tab. Reload the page and look for a request to the SeaText domain. You can also check the browser console for any errors.
Create a separate SeaText account for the staging domain. Each account is linked to a single primary URL. You can delete the staging account later if needed.
The script is lightweight and loads asynchronously. It should not noticeably affect page load times. The AI runs only after the page loads and does not block rendering.
Yes. Simply delete the script tag from your index.html and redeploy. The AI will stop working immediately.
SeaText AI offers a free 1-month pilot trial. You can start without paying. After the trial, choose a plan that fits your needs. Visit the pricing page for current plan details.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI works without a mandatory human review period. After installing the JavaScript snippet and verifying the domain with a 40‑second visit, the platform’s autonomous agents start immediately. Configuration and optional Variant Edit provide human control but do not block the AI.
SeaText AI works without a mandatory human review step.
Once the tracking script is live and the domain is verified, the AI agents start automatically.
No approval queue or compliance check is required before the system begins processing data.
The platform is built for fully automated deployment after a short technical handshake.
Create a SeaText AI account and copy the JavaScript snippet from the dashboard.
Paste the snippet into the head element of every page.
If you use WP Engine, install the official plugin that adds custom JavaScript.
Visit your own site several times and stay on a page for at least 40 seconds.
This dwell time signals the script to phone home and bind the domain to your account.
After the visit, wait about five minutes for the dashboard to show your website name next to the SeaText logo.
If the name does not appear after ten minutes, contact support for a technical check.
These steps are purely technical; they do not involve a manual content review.
The 40‑second visit acts as a lightweight proof‑of‑ownership check.
It prevents the script from being used on a domain you do not control.
Once the beacon fires, the backend links the domain to your account.
The link is confirmed when the site name appears in the dashboard.
Only one primary URL can be bound per account.
Separate accounts are required for development, staging, and production domains.
Localhost and dynamic development domains are blocked for security reasons.
After the domain is linked, open the Main AI Hub to toggle the agents you need.
Agents start immediately after you switch them on.
No further sign‑off is required from a human reviewer.
SeaText provides more than twenty specialized AI agents.
Each agent runs as a self‑contained workflow once activated.
The CRO Optimizer continuously tests headlines, CTAs and body copy, keeping the winning variant.
The Google Ads Agent rewrites landing‑page text in real time to match the keyword that triggered the ad.
The Bot Protection Agent flags suspicious paid clicks and builds refund‑ready reports for Google, Meta, TikTok and Reddit.
The Translation Agent serves up to 125 languages on the fly, with an optional manual‑edit layer.
The Personalization Agent swaps headlines, proof points and offers based on visitor source, firmographics or UTM parameters.
Other agents include AI SEO Content Factory, Ecommerce Product Copy Agent, Free Website Chat Agent, AI A/B Testing Agent, Visitor Source Rewrite Agent, ChatGPT Brand Visibility Agent, Scroll Slowdown Agent and Conversion Agent.
All agents operate on live traffic instantly after activation.
The platform does not stage changes for human review unless you open the Variants Edit panel.
Human input is available but never mandatory for the AI to run.
During configuration you set targeting rules, language lists and guardrails such as “do not rewrite legal disclaimer”.
After the AI generates its first round of translations or copy variants, you may review, edit or reject them in the Variants Edit panel.
Bot‑refund evidence and conversion dashboards are presented for your team to act on.
None of these steps block the AI from operating; they are quality‑of‑life controls.
You can pause an agent at any time; its learned data is preserved and resumed when toggled back on.
The free one‑month pilot for the Google Ads Agent follows the same automated activation flow.
Localhost and dynamic dev domains cannot be used; a real, publicly resolvable hostname is required.
Each SeaText account manages only one primary URL; multiple sites need separate accounts.
First‑run translations are generated automatically; if brand voice is critical, run a quick pass in Variants Edit before launching to high‑traffic locales.
Bot‑refund reports are compiled by the agent, but your finance or ads team must still file the claim with the ad platform.
If the dashboard still shows “connecting” after ten minutes, check the script placement or contact support.
For regulated industries, you remain responsible for ensuring the AI’s output meets industry rules; use Variants Edit guardrails to lock down sensitive sections.
Build a two‑minute checklist: paste script → visit homepage → count to 40 seconds → refresh dashboard → confirm site name appears → enable agents.
This short ritual eliminates the only real delay in the whole process.
No. The CRO Optimizer tests and keeps winners automatically; you only step in if you want to veto a specific variant.
Only if the subdomain is a real, public DNS record; localhost, ngrok tunnels and ephemeral preview URLs are rejected.
Contact support – this flags a possible installation issue such as CSP blocking the script or incorrect template placement.
The platform itself does not impose one; you must ensure the AI’s output meets your industry rules.
Within seconds of activation; the Google Ads Agent rewrites the page before the visitor sees it on the very next paid click.
Yes. Toggling an agent off preserves its history; turning it back on resumes from where it left off.
The Google Ads Agent offers a free 1‑month pilot; the same automated activation flow applies.
Teams that treat the 40‑second visit as a “set‑and‑forget” step sometimes forget to verify the domain link before launching a big campaign.
Build a two‑minute checklist: paste script → visit homepage → count to 40 → refresh dashboard → confirm site name appears → enable agents.
That tiny ritual eliminates the only real delay in the whole process.
Once the link is confirmed, the AI agents run autonomously, delivering real‑time optimizations without any human gate.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: If SeaText AI hasn't activated within 24 hours, first check for ad blockers or conflicting scripts, then contact SeaText support with your integration ID if the issue persists.
If SeaText AI hasn't activated within 24 hours, first check for ad blockers or conflicting scripts, then contact SeaText support with your integration ID if the issue persists.
This is the fastest path to a fix. Most activation problems are caused by browser extensions or script conflicts. If those are not the cause, support can investigate server-side issues.
Do not wait longer. The 24-hour mark is a clear signal that self-help steps have failed. Contacting support with your integration ID ready saves time and gets your website connected faster.
SeaText AI activates when you add the JavaScript code to your website, then visit the site and stay on the page for at least 40 seconds. After that, you should wait about 5–10 minutes for your website name to appear at the top of your SeaText dashboard. This confirms the AI is linked to your account and ready to configure.
Most users see activation within minutes, not hours. If activation takes longer than 24 hours, something is likely blocking the process.
Many activation delays come from a handful of easily fixable issues. Here are the most frequent ones:
Each of these mistakes can prevent the AI from linking to your account, even days after installation.
Follow this order to isolate the problem. Do not skip steps.
If the website name still does not show after 10 minutes, proceed to contact support.
SeaText’s integration guide says to contact support if you do not see your website name after 10 minutes. If you have followed all the steps above and activation still hasn't happened after 24 hours, it is time to reach out. Do not wait longer—support can check your account and script for server-side issues or misconfigurations.
Have your integration ID ready. This ID is visible in your SeaText account on the General Integration page. Without it, support will need to ask for it first, which slows down the fix.
To speed up the troubleshooting, provide the following information in your first message:
This allows support to identify the issue quickly and often resolve it within a few hours.
| Fact | Details |
|---|---|
| Activation trigger | Visit or refresh your website and stay on the page for at least 40 seconds while logged into your SeaText account. |
| Expected wait time | Up to 5–10 minutes for the website name to appear in the dashboard. If it doesn't appear after 10 minutes, contact support. |
| Domain restrictions | Development URLs (localhost, 127.0.0.1, dynamic dev domains) are restricted. Use a real public domain. |
| Multiple domains | Each website requires its own separate SeaText account. Do not reuse the same code on multiple sites. |
| WPEngine requirement | You must install the WPEngine custom JavaScript plugin and add the SeaText code through it. |
| Security | The script is inert until you visit the site. Activation only happens when a user session matches the account. |
Contact SeaText support immediately. Provide your integration ID and describe the steps you have taken. Do not wait 24 hours before reaching out—the 10-minute guideline is set to catch issues early.
No. SeaText restricts development URLs like localhost and dynamic staging domains for security reasons. You must use a real, public domain.
No. Each website needs its own account. If you try to reuse the same code on multiple domains, only the first domain will activate.
No. The 40-second visit starts the process. After that, you can close the page. The activation happens on SeaText's servers within 5–10 minutes.
Yes, ad blockers can block the SeaText script from loading. Disable them temporarily, refresh the page, and stay for 40 seconds. You can re-enable them after activation.
Most users see their website name appear in the dashboard within 5 minutes after the required visit. If it takes longer, follow the diagnostic steps above.
Your integration ID is a unique code displayed on the General Integration page in your SeaText account. Support will ask for it to investigate your specific installation.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Traffic volume does not make SeaText activation faster or slower. Activation happens the first time a visitor stays on your page for about 40 seconds, then takes a few minutes to link to your account. After that, higher traffic helps the AI test and optimize more quickly; low traffic only delays meaningful results.
The short answer: traffic volume does not make SeaText activation faster or slower. Activation needs at least one qualifying visit — someone who lands on the page and stays about 40 seconds. Zero visits means no activation. But ten visits and ten thousand visits trigger the same way.
Traffic volume becomes important after activation. The AI needs visits to test, compare, and optimize. So a high-traffic site will see meaningful results faster than a low-traffic one, even though both activate at the same speed.
SeaText's JavaScript sits on your page until something wakes it up. The official setup guide says the AI "remains inert until activated." That activation is tied to a real visit, not a traffic threshold.
When a visitor lands on your page and stays for about 40 seconds, SeaText links that session to your account. Visit or refresh a few times, wait a few minutes, and your site name appears next to the SEATEXT logo. Traffic volume never appears in that equation.
Think of it like turning on a smart plug. The plug turns on the first time you press the button, whether one person presses it or a thousand. Pressing it more times does not make it turn on faster. The same is true for SeaText.
Here is the sequence SeaText's setup guide describes:
After that, you go to the Main AI Hub to activate the agents you want and adjust settings under Configuration. None of these steps depends on how many other visitors your site has.
Activation is the wiring. Optimization is the work that happens after the wiring is live. SeaText rewrites headlines, buttons, proof, and product copy, "tests the changes, and keeps what sells more." That testing needs visitors.
With more visitors, the AI has more chances to compare versions. It can see which headline led to a click, which CTA led to a purchase, and which page version kept someone on the page. With fewer visitors, those comparisons are thinner.
The same setup guide explains that SeaText's agents work "in real time" and continuously optimize every visitor journey. A high-traffic page gives the agents a steady stream of journeys to learn from. A low-traffic page gives them a slow trickle.
If your page gets ten visits a week, activation still happens. But you will probably not see clear performance changes in the first few weeks. One conversion might be luck, and the AI cannot tell the difference with a tiny sample.
Low traffic does not delay the activation timestamp. It delays the moment when you can trust what the AI is doing. That is why people sometimes say "it takes longer to work" when they really mean "there is not enough data to show a trend."
On very low-traffic pages, keyword-matched rewrites may rarely fire because the AI only sees a keyword once. On a busy page, it sees the same keyword many times and can tune the page for that search.
These are hypothetical examples based on the setup rules, not client results.
The takeaway is simple: high traffic makes optimization faster, not activation.
Traffic volume is not the only thing that affects activation. Several setup limits can block it entirely:
Also remember that not all traffic is useful. Bot traffic can inflate visit counts and skew your testing data. SeaText has a bot protection agent for paid ads, but that is a separate feature from activation.
| Fact | Detail |
|---|---|
| Activation trigger | Visit or refresh your site and stay on the page for at least 40 seconds. |
| Post-visit wait | Your website name should appear next to the SEATEXT logo within about five minutes. |
| Script state | SeaText remains inert until activated. |
| Domain rule | Each account is linked to one primary URL. Use separate accounts for separate domains. |
| Development URLs | localhost is restricted; dynamic development domains may not function properly. |
| Next step | Go to the Main AI Hub to activate agents and configure parameters. |
No. Activation happens after the first qualifying visit where someone stays for about 40 seconds. If no one visits at all, activation waits until someone does, but traffic volume does not add delay beyond that.
SeaText says to wait about five minutes. If it still has not appeared after 10 minutes, contact support.
You can activate the agents with any traffic. But low traffic gives the AI fewer chances to test changes, so meaningful performance data comes more slowly.
Only if the staging domain is a valid real domain separate from production. localhost is blocked, and dynamic development domains may not link reliably.
If your site name does not appear after about 10 minutes, or if repeated qualifying visits still do not link the account, contact support rather than adding more traffic.
No. A busy site still needs one qualifying session and then the usual five- to ten-minute window. Higher traffic starts helping after activation, during optimization.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: You can speed up SeaText AI activation by correctly placing the script in your website's header, then manually triggering a few test sessions. After that, wait up to five minutes for your site to appear in the dashboard — if it doesn't, check your setup or contact support.
The fastest way to activate SeaText AI is to do each installation step correctly the first time. Adding the script to your site can take under a minute. The full activation normally finishes within 5–10 minutes. Most delays come from setup mistakes.
Add the SeaText JavaScript code to every page of your website. The simplest way is to paste it into the <head> section of your site template. That way, every page loads the script before the content is displayed.
If you use WPEngine, install the WP Engine plugin. It lets you add custom JavaScript code to your pages. Apply the code across all pages, not only the homepage.
Why every page? The AI needs to track visits across your site. A homepage-only script gives the system incomplete data. That can delay activation or make the connection look missing.
Once the script is live, visit or refresh your website several times from a regular browser. Stay on each page for at least 40 seconds. This tells SeaText that real traffic exists and links the AI to your account.
Three to five sessions are usually enough. Use a private browsing window or a different device to simulate fresh visitors. Move between pages and read normally. You do not need to visit every page.
Wait at least five minutes. Then log into SeaText and look at the top of the dashboard. Your website name should appear next to the SeaText logo. That confirms the site is connected and ready for the next step.
If the name does not appear after 10 minutes, contact SeaText support immediately. The delay may point to an installation issue that requires help.
SeaText AI remains inactive until it sees real user activity. The installation process is secure. The AI stays inert until activated. This protects your website's content from being modified before the account link is confirmed.
Simply having the code on the page is not enough. The system needs evidence that traffic is real. The 40-second dwell time helps separate a human visit from a bot or a quick misclick. The five-minute wait gives SeaText time to process the visit data and associate it with your account.
This is not a technical limitation. It is a safety check. If the AI changed content before the account was linked, it could act on the wrong site or on unverified traffic.
The same principle appears in the next phase. After the site is connected, you still choose which pages and agents to activate. The system stays passive until you tell it what to do.
| Fact | Detail |
|---|---|
| Script placement requirement | Must be on every page, usually in the <head> section. |
| Activation trigger | Several visits with at least 40 seconds of dwell time per visit. |
| Dashboard confirmation time | Wait 5 minutes. If not visible after 10 minutes, contact support. |
| Domain restrictions | Only real public domains. Localhost and dynamic dev URLs are restricted. |
| Multiple websites | Each website needs a separate SeaText account. |
| Multiple domains | Use a separate account for each domain. Each account links to one primary URL. |
| Security | AI remains inert until activated, keeping your content safe. |
| WPEngine support | Use the WP Engine plugin to add custom JavaScript across all pages. |
Use these facts as a checklist when you deploy. If you are stuck, the table shows which part of the setup to check first.
If your website name does not show after 10 minutes, do not just wait. Check the basics in order.
If all those checks pass, contact SeaText support from the General Integration page. They can inspect the installation remotely and tell you what is wrong.
Your path depends on where your site is hosted and how it is built.
This planning removes the most common causes of delay. It also prevents you from discovering domain or routing issues after the five-minute wait.
Activation does not turn on every feature automatically. The dashboard connection only means your site is linked to your account.
Next, go to the Main AI Hub and activate the AI on the pages you want to improve. Click Configuration to adjust the AI parameters. You choose which agents to run and where they are allowed to make changes.
SeaText AI also provides an initial round of automatic translations and variants for testing. You can review them in Variants Edit in the left panel. Select the URL and language you want to edit. From there, you can create, review, or manually edit translations.
After this step, the AI works in the background on the pages and agents you selected. This is why a clean initial activation matters. Fixing setup mistakes later interrupts the path from install to optimization.
No. The dwell time is part of the official activation steps. Short visits may not give SeaText enough data to know real traffic is present.
Not necessarily. A few visits to your main pages are enough to start activation.
Make sure the script loads on the initial page load and that the AI can track route changes. The script should be present on every route, not just the first view.
You can use a browser automation tool, but each session should last at least 40 seconds. Avoid headless browsers that may be detected as bots.
Development URLs are restricted for security reasons. Use a real, public domain when you install the script.
You can, but you need a separate account for each domain. Each SeaText AI account is linked to a single primary URL.
The website should appear in the dashboard after about five minutes. If it is not there after 10 minutes, contact support.
No. The waiting period is a security measure. The fastest approach is to place the script correctly, trigger several visits, and wait five minutes.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI works with any CMS that allows JavaScript injection in the page head or body. Activation requires adding the script, visiting the live site for at least 40 seconds, and waiting up to 10 minutes for the dashboard to show the site as connected. Platforms like WordPress, Shopify, Webflow, Wix, Squarespace, and custom stacks all meet this requirement; WPEngine users need a helper plugin to add custom scripts.
Yes, your CMS is compatible with SeaText AI's activation speed as long as it lets you inject a JavaScript snippet into the page head or body, runs on a live public domain, and does not strip or defer the script. Major platforms like WordPress, Shopify, Webflow, Wix, Squarespace, and custom/headless stacks meet these criteria, so activation speed will be consistent across them.
SeaText AI is delivered as a single JavaScript snippet. You paste it into every page you want optimized. The script stays inert until the system detects real visitor activity on a live domain. According to the integration guide (S1), you must visit or refresh the site several times and stay on the page for at least 40 seconds. This triggers the AI and links it to your account. After that, wait at least five minutes—up to ten—for your website name to appear next to the SeaText logo in the dashboard. If it does not appear after ten minutes, the guide advises contacting support because the installation may have been blocked by the platform.
A CMS is compatible when it meets three practical conditions:
<head> or before the closing </body> tag on every page.localhost or dynamic preview URLs). Development domains are explicitly restricted for security reasons (S1).If your CMS satisfies these, activation speed is effectively the same across platforms: the 40-second visit plus the five-to-ten-minute dashboard propagation.
| Platform | Script Injection Method | Known Friction | Activation Notes |
|---|---|---|---|
| WordPress (self-hosted) | Theme header.php, functions.php, or a code-snippet plugin | Caching plugins may delay script execution | Clear cache after pasting snippet; then do the 40-second visit. |
| WPEngine | Requires the WPEngine "Custom JavaScript" plugin | Plugin must be installed and activated network-wide | Documented in the integration guide (S1) as a special case. |
| Shopify | Online Store → Themes → Edit code → theme.liquid | Theme updates can overwrite the snippet | Use a snippet file and include it in layout to survive updates. |
| Webflow | Project Settings → Custom Code → Head Code | None reported | Publish to live domain; staging domains may not count. |
| Wix / Squarespace | Settings → Custom Code → Head | Some plans restrict custom code | Verify your plan allows head injection before starting. |
| Custom / Headless | Add to base template or layout component | Ensure server-side rendering does not strip the script | Test with a hard refresh on production URL. |
The marketing claim "Add SeaText to your site in under 1 minute" (S2, S3, S6) refers to the mechanical step of pasting the snippet. Real activation speed depends on:
None of these are CMS-specific; they are infrastructure choices that apply equally to any platform.
deploy-preview-123.netlify.app) are explicitly called out as unreliable for account association (S1).dev.example.com).Use this checklist before you start:
<script> tag to the <head> of every page on the live domain?https://seatext.com or inline scripts?If you answer yes to all five, your CMS is compatible and activation will follow the standard timeline. If any answer is no, resolve that blocker first—switching CMS is rarely necessary.
| Fact | Detail | Source |
|---|---|---|
| Integration method | Single JavaScript snippet pasted into every page | S1 |
| Activation trigger | Visit live site, stay ≥ 40 seconds | S1 |
| Dashboard confirmation | Site name appears next to logo within 5–10 minutes | S1 |
| WPEngine requirement | Custom JavaScript plugin must be installed | S1 |
| Domain rules | One account per primary domain; localhost and dynamic preview URLs restricted | S1 |
| Marketing claim | "Add SeaText to your site in under 1 minute" | S2, S3, S6 |
Yes, if the snippet is included in the root layout so it loads on every route change. Client-side routing must not strip the script between navigations.
Only if the staging subdomain is a stable, real hostname (e.g., staging.example.com). Ephemeral preview URLs will not reliably associate with your account (S1).
Add script-src https://seatext.com (and connect-src for the same origin) to your Content Security Policy header or meta tag.
No. One account covers the primary domain; the translation agent handles up to 125 languages on that domain.
Open dev-tools → Network, filter for "seatext", reload the page. You should see a request to the SeaText collector. If absent, the snippet was stripped or blocked.
The source pack does not publish load-time metrics. Treat it like any third-party script: load asynchronously, place in <head> with async or defer, and measure with Lighthouse before and after.
Create a new SeaText account for the new primary URL and reinstall the snippet. The old account remains tied to the old domain.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: A successful SeaText AI connection shows three clear signs. Your website name appears next to the SEATEXT logo at the top of the dashboard. A success or confirmation message appears after your platform accepts the integration code. Live AI responses appear on your pages after you activate an agent. The dashboard sign and live responses are true SeaText signals. The platform message only confirms the code was accepted. This readiness checklist walks through each sign and shows how to confirm the link before you activate any agents.
To confirm that SeaText AI is connected properly, look for three signs. Your website name appears next to the SEATEXT logo at the top of the dashboard. A success or confirmation message appears after you paste the integration code. Live AI responses appear on your pages after you activate an agent. The first and third signs come from SeaText. The success message comes from your platform. It only confirms the code was accepted.
This page is a readiness checklist. It walks through each sign in order. It explains what to look for. It shows how to confirm the link before you turn on any agents.
SeaText AI stays inert until it is fully linked to your account. The installation process is secure. That design protects your site content during setup. It also means a half-finished setup will look like nothing is happening. You will not see rewrites, translations, or variant tests until the connection is verified.
Checking the signs first saves you from activating agents on a broken link. It also helps you avoid false starts. If you activate an agent before the domain is linked, the agent has nothing to work with. You may think the AI is broken when the real problem is the connection.
The three signs below give you a simple readiness check. Use them in order. The first two take a few minutes after installation. The third only appears after you activate an agent in the Main AI Hub.
Use this list as your main checklist. Each item has a specific place to look and a specific thing to see.
Follow these steps in order. Do not skip the dwell time step. SeaText uses real visits to link your domain to your account.
This order matters. The dashboard sign confirms the connection. The live responses confirm the agent. Both are needed for a full setup.
Each sign confirms a different part of the setup. Knowing the difference helps you troubleshoot faster.
If you see the dashboard sign but no live responses, the connection is fine. The missing piece is agent activation in the Main AI Hub. If you see live responses, the connection passed its final test.
If one or more signs are missing, work through this short list before contacting support.
| Item | Detail |
|---|---|
| Integration method | JavaScript snippet placed in your site header or via a plugin |
| Minimum dwell time per visit | 40 seconds |
| Time for domain to appear in dashboard | At least 5 minutes, up to 10 minutes |
| Accounts per domain | One account per primary URL |
| Restricted domains | Localhost and dynamic development domains |
| First sign of success | Website name shown next to the SEATEXT logo |
| Final sign of success | Live AI rewrites or translations on your pages |
If your website name does not appear next to the SEATEXT logo after ten minutes, the installation likely failed on your platform. Contact SeaText support right away. Do not activate agents yet. They will run against a broken link and produce no visible changes.
This checklist covers the standard JavaScript integration. Custom setups, single-page applications, and sites behind heavy caching may need extra steps that are not covered here. If your site uses a custom framework, test the connection on a staging domain first. Use a real domain, not localhost. Confirm the dashboard shows your domain before you go live.
Look for these three signs. Your website name appears next to the SEATEXT logo at the top of the dashboard. A success or confirmation message appears after your platform accepts the integration code. Live AI responses appear on your pages after you activate an agent. The dashboard sign and live responses are SeaText connection signs. The success message is a platform-level confirmation only.
Wait at least five minutes after your first visit. If the domain name does not appear next to the SEATEXT logo within ten minutes, reinstall the script or contact support.
Yes. Stay on each page for at least 40 seconds. Short visits may not register. The link between your domain and your account will not form.
No. Each SeaText AI account is linked to a single primary URL. To run SeaText on multiple websites, create one account per website.
The most common reasons are a development URL, a script placed on only one page, or dwell time under 40 seconds. Recheck the install location and revisit the site with a longer stay.
No. It confirms the connection is live. The AI only rewrites content after you activate an agent in the Main AI Hub.
The integration success message comes from your platform. It confirms the code was accepted. The dashboard logo with your website name confirms the script is talking to your SeaText account. You need both before activating agents. Only the dashboard sign is a SeaText connection sign.
You can, but use a real domain. Localhost and dynamic development domains are restricted. SeaText may not be able to associate traffic with your account reliably.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI connects immediately after the JavaScript snippet loads and sends a handshake signal to the SeaText servers. The dashboard typically shows the connected site within 5 minutes, but DNS and CDN propagation can extend visibility to 10 minutes. A 40-second on-page dwell is required to complete the activation handshake. Each domain needs its own SeaText account; development URLs such as localhost are restricted.
When we say SeaText AI “connects,” we mean the JavaScript snippet on your website successfully communicates with the SeaText cloud servers. The script runs on every page load, sends a handshake signal, and registers your domain. Once connected, the AI remains inactive until you activate specific agents in the dashboard. The connection is what allows the dashboard to show your site as ready and lets you enable agents such as the CRO Optimizer or Google Ads Agent.
The connection process follows a precise sequence. First, the browser loads the SeaText JavaScript snippet placed in your site’s head or footer. On page load, the script executes and sends a handshake signal to SeaText servers over HTTPS. The servers receive the signal, validate the domain against the account’s registered primary URL, and create a domain record. The dashboard then polls for this record. Because the dashboard reads from a replicated data store, the new record may not appear instantly. The 5-minute wait accounts for this replication lag plus any DNS or CDN propagation.
After you paste the script, the browser must resolve your domain to the correct IP and fetch the updated page. If you just changed DNS records or use a CDN like Cloudflare, edge caches may serve the old page without the script for several minutes. The SeaText handshake only fires when the script actually loads in a visitor’s browser. Until the CDN purges and the new HTML reaches the edge, no handshake occurs. SeaText’s own dashboard also caches the domain list for a short period. The combined effect is a typical 5-minute delay, with a 10-minute upper bound in worst-case cache scenarios.
On a live domain with no aggressive caching, the script loads on first visit. The handshake fires, the domain registers, and the dashboard updates within 5 minutes. This is the baseline scenario.
WPEngine blocks direct script injection in theme files. You must install the WP Engine Custom JavaScript plugin, add the SeaText snippet there, and apply it site-wide. The handshake works the same way, but the extra plugin layer can add a minute or two before the script appears on the front end.
If your CDN caches HTML, the new script won’t load until the cache expires or you purge it. Purge the cache immediately after installing the script. Then visit the site. The handshake will fire, but dashboard visibility may still take the full 10 minutes because the CDN’s edge nodes refresh on their own schedule.
SeaText restricts localhost and dynamic development URLs (e.g., ngrok tunnels, temporary staging subdomains) for security. The handshake will not register these domains. You must use a real, publicly resolvable domain. For a development workflow, register a dedicated subdomain (e.g., dev.example.com) and create a separate SeaText account for it.
The script-to-server handshake is near-instant once the script loads. However, dashboard visibility lags by 5–10 minutes due to DNS, CDN, and internal replication. You cannot speed up the dashboard; you can only ensure the script loads quickly by purging caches. The mandatory 40-second dwell time ensures the handshake completes and the domain is linked to your account. A quick page load without dwell may not trigger the link, forcing you to wait longer. SeaText enforces one account per primary URL. If you manage a production site and a staging site, you need two accounts and two scripts. This adds setup overhead but isolates data and billing cleanly.
As a SeaText integration specialist, I see three common patterns. First, users install the script but don’t visit the page, so no handshake fires. The dashboard stays empty. Second, they use a CDN and forget to purge the cache; the script never loads, so the handshake never happens. Third, they try to connect localhost or a dynamic preview URL, which our security policy blocks. In a standard production setup with a purged CDN, the handshake completes in seconds and the dashboard updates within 5 minutes. If you don’t see your site after 10 minutes, open the browser’s network tab, filter for “seatext,” and confirm the script loads and returns a 200 response. If the script loads but the dashboard stays empty, contact support with the domain and timestamp; we can verify server-side receipt of the handshake.
If the dashboard still shows no site after 10 minutes, double-check these:
If all checks pass, contact SeaText support. They can verify if the server received the handshake signal.
This timeline applies to standard installations on production domains. If you are integrating through a complex proxy, a strict firewall that blocks outbound HTTPS to SeaText domains, or a custom CMS that strips JavaScript, the connection may take longer or fail. Subdomains that are not the primary URL on your account will not connect. Always use the exact domain you registered. The AI remains inert until you activate agents in the dashboard; connection alone does not start rewriting or translation.
No. The connection only makes the site visible in your dashboard. You must then activate the specific agents (e.g., CRO Optimizer, Google Ads Agent) for each page. The AI remains inert until you turn it on.
No. Visiting the page for at least 40 seconds is required to complete the activation handshake. A quick page load without dwell time may not trigger the link.
CDN caching can delay propagation. If you use a CDN, purge the cache after installing the script. Then visit the site. The connection may still take up to 10 minutes due to caching.
Yes. Each domain requires its own account and script. Create a new account for the new domain and install the new code.
Log into your SeaText dashboard. At the top of the page, next to the SeaText logo, you should see your website name. If it is there, you are connected.
Use a real production domain, paste the code in the correct location, visit the site yourself and stay for 40 seconds, then wait 5 minutes. Avoid using development environments or dynamic URLs.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Yes, the SeaText AI dashboard includes a connection status indicator. After you install the script and refresh your site, your website name appears next to the SEATEXT logo at the top of the dashboard, confirming a successful connection. If it doesn't appear within 10 minutes, contact support.
Yes, you can check the SeaText AI connection status in your dashboard.
After you install the SeaText AI script on your website, the dashboard shows a clear connection indicator. Follow these steps to verify it.
The dashboard uses a simple visual cue: your website name displayed next to the SEATEXT logo. There are three possible states:
| Fact | Detail |
|---|---|
| Indicator Location | Top of the dashboard, next to the SEATEXT logo |
| Time to Appear | Up to 5 minutes after first page visit |
| Required Action | Visit or refresh your website and stay at least 40 seconds |
| If Missing After 10 Minutes | Contact support immediately |
| Multiple Domains | Each domain needs a separate SeaText AI account |
Without a confirmed connection, the AI agents won't activate on your pages. You might set up agents but see no changes. The connection status is your first check when troubleshooting why SeaText isn't working.
The connection indicator only works for real, public domains. Development URLs like localhost are restricted for security reasons. Dynamic development domains may not function properly because SeaText can't reliably associate traffic with your account. If you use a staging site on a subdomain, you may need a separate account.
If the connection indicator doesn't appear:
The first visit triggers a handshake between your browser and SeaText's servers. During the 40‑second dwell time, the script sends a unique token that ties the page to your account. This token is stored in SeaText’s backend and is required before the dashboard can display your site name. Skipping the dwell time means the token never reaches the server, so the dashboard shows no connection.
Source: General Integration guide (S1) states, “Important: Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”
After the 40‑second visit, SeaText updates its internal registry. Within five minutes, the dashboard pulls the registry entry and renders your website name next to the SEATEXT logo. This visual cue is the only official status indicator.
If the name appears, the connection is confirmed. If it does not appear after ten minutes, the integration likely failed and you should contact support.
Seeing your website name means the script is linked, but AI agents remain inactive until you manually enable them in the “Configuration” or “Main AI Hub” sections. This two‑step process protects your content from unintended changes.
First, the connection status confirms that SeaText can read page data. Second, you decide which agents (CRO Optimizer, Translation, Bot Protection, etc.) to turn on. Each activation may require additional settings, such as language selection or keyword mapping.
1. Navigate to the “Main AI Hub” on the dashboard.
2. Click “Configuration” to select the agents you need.
3. Review each agent’s default parameters and adjust them to match your business goals.
4. Save the settings. The agents will now run on every page where the script is present.
5. Monitor the “Analytics” tab for performance metrics like conversion lift, bot‑refund claims, and translation coverage.
SeaText ties one account to one primary URL. If you have a production domain (example.com) and a staging domain (staging.example.com), you must create a separate SeaText AI account for each. The same rule applies to completely different domains (example.org, demo.com).
Why? The backend cannot reliably associate traffic from two unrelated domains with a single token. Attempting to share a token across domains will result in no connection indicator for at least one of them.
Steps to manage multiple sites:
For staging environments that use subdomains, treat the subdomain as a separate domain if you need AI features there. Otherwise, you can keep the staging site without the script and only install it on production.
Usually within 5 minutes after you visit your website with the script installed. The first visit must last at least 40 seconds.
That means the connection is established. Proceed to the Main AI Hub to activate the agents on your pages. Check the Configuration settings for each agent.
No. Each SeaText AI account is linked to a single primary URL. Create a separate account for each website.
Yes, the dashboard is accessible from any device. The indicator appears at the top of the page regardless of screen size.
Your website name appears in plain text next to the SEATEXT logo. There is no separate color‑coded icon, but the presence of the name confirms connection.
You can force a refresh by revisiting your site immediately after installation. The 40‑second dwell time is required for the first activation, but after that, the connection persists.
Yes, changing the primary domain requires a new SeaText AI account. Update the script with the new domain's code.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: The SeaText AI connection status indicator tells you whether your website is linked to your SeaText account. Green means connected, yellow means pending or syncing, red means disconnected or error, and gray means inactive. The indicator appears as your website name next to the SeaText logo in the dashboard.
The SeaText AI dashboard displays a connection status indicator at the top of the page. It is the presence of your website name next to the SeaText logo. When the name appears, the script is active and linked to your account. If the name is missing, the link has not been confirmed.
| Status color | Meaning | Next step |
|---|---|---|
| Green | Connected – the website name shows next to the logo | Proceed to the Main AI Hub and activate agents |
| Yellow | Pending or syncing – the name may appear briefly then disappear | Wait up to five minutes; refresh the dashboard |
| Red | Disconnected or error – the name never appears | Check script installation, then contact support if it persists past ten minutes |
| Gray | Inactive – no account or script installed | Create an account, copy the script, and install it on the site |
Log into your SeaText AI account. Look at the top of the page. If your website name appears next to the SeaText logo, the connection is working. If it does not appear, the system has not confirmed the link. The source pack states: “Wait at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page. This indicates that your website is connected and ready to proceed to the next step.”
First, create a SeaText AI account. Then copy the JavaScript code from the General Integration page. Install the script on every page of your website. Visit or refresh your site several times and stay on a page for at least 40 seconds. This activates the AI and links it to your account. After activation, wait up to five minutes for the dashboard to show your website name. The script remains inert until this activation step, keeping your content safe.
Green appears when the script loads correctly and the domain matches the account. Yellow can happen during the first five minutes after activation or when the dashboard is still syncing. Red often means the script is missing, placed in the wrong location, blocked by a firewall, or the domain is a dynamic development URL such as localhost. Gray shows when no account exists or the script has never been installed.
If the indicator is red or missing after ten minutes, verify that the JavaScript snippet is present in the <head> of every page. Confirm that the domain you use is a real, publicly accessible URL; development domains are restricted for security. Clear browser cache and reload the dashboard. If the problem remains, contact SeaText support with your account email and the URL you are trying to connect.
Each SeaText AI account supports only one primary URL. To use the service on multiple domains, you must create separate accounts. Dynamic development domains (e.g., localhost, staging subdomains that change) are blocked because the system cannot reliably associate traffic with your account. If you move the script to a new domain, you must repeat the activation steps. The indicator only confirms script connectivity; it does not show the status of individual AI agents such as the Google Ads Optimization Agent or the Translation Agent.
After you install the script and visit your website, the indicator should appear within five minutes. If it does not appear after ten minutes, contact support.
No. Each SeaText AI account is linked to a single primary URL. You need separate accounts for each website.
This could indicate a temporary network issue or that the script was removed from a page. Check your installation and ensure the script remains on every page.
The indicator only confirms that the SeaText AI script is connected to your account. Individual agents still need to be activated from the Main AI Hub. The indicator does not show agent‑specific statuses.
Reinstall the script from the General Integration page. Then repeat the activation steps: visit your site, stay 40 seconds, wait up to five minutes for the name to appear.
Development URLs such as localhost are restricted for security reasons. SeaText AI cannot reliably associate traffic from those domains with your account, so the connection will stay gray or red.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: To troubleshoot SeaText AI connection issues, first check the SeaText dashboard to verify your website is listed. Then confirm your JavaScript script is correctly installed on your site, refresh your page and stay for at least 40 seconds, and wait up to 10 minutes for the connection to appear. If it doesn't, check for common mistakes like using a localhost domain, multiple accounts, or incorrect script placement.
Follow these steps in order. Each step has a verification check. Use the result to decide whether to continue.
Log into your SeaText AI account. Look at the top of the page next to the SeaText logo. If you see your website name, the connection is active. If not, continue to Step 2.
The dashboard is your source of truth. It shows whether SeaText can associate traffic with your account. A missing name means the script has not been detected.
Open your website's source code. Confirm the SeaText JavaScript snippet is present in the <head> or just before the closing </body> tag. If you use a tag manager, ensure the script fires on all pages.
Source S1 says to copy the JavaScript code provided by SEATEXT AI and install it across all pages. A single missing page can delay activation.
Visit your website and refresh it several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account. If you leave too early, the connection may not register.
After staying on the page, wait at least five minutes. Refresh the SeaText dashboard. If your website name appears next to the SeaText logo, the connection is successful. If it does not appear after 10 minutes, contact SeaText support.
SeaText does not work on localhost or development domains. Ensure you are using a real, public domain. If you manage multiple websites, each needs its own SeaText account – one account per domain.
These causes cover most failed connections. Work through them one by one.
Open your browser's developer console (F12) and look for any SeaText-related errors. A successful load shows no red errors and a network request to SeaText servers. You can also use the browser's Network tab to filter for 'seatext' and confirm the script loads.
Verify the request returns a 200 status. If it returns a 403 or 404, the script URL may be wrong or blocked. Check the code you copied from your SeaText account.
A successful connection is the start of every SeaText benefit. Without it, no AI agent can activate on your site.
SeaText deploys autonomous agents that work in real time. These agents can rewrite headlines, match landing pages to Google Ads keywords, recover wasted ad spend from bot clicks, and translate content into 125 languages. None of this happens if the script is not connected.
The connection also enables data collection. SeaText reads the campaign, keyword, and visitor intent behind each paid click. It uses that data to adapt the page. If the connection fails, the agent has no signal to work with.
For a marketing team, the connection is the difference between a static page and a page that responds to each visitor. A short 40-second wait is required before agents can start.
The SeaText script loads as part of your page. It stays inactive until a visitor meets the activation rule.
When a visitor refreshes the page and stays for 40 seconds, the script sends an activation signal to your account. The dashboard then checks for that signal.
Source S1 says to wait at least five minutes. During that window, the dashboard polls for the website name. If the name appears, the account-domain binding is complete.
Each SeaText account is linked to one primary URL. The script must run on that exact domain. If the domain does not match, the connection stays inactive.
After activation, you can proceed to the Main AI Hub. There you configure which AI agents run on which pages. The dashboard remains the place to confirm live status.
SeaText AI has real constraints. Knowing them helps you troubleshoot faster.
Performance: A JavaScript snippet adds a network request. If your page is slow, the script may load late. Use the code exactly as provided and test the impact with your own speed tools.
CSP and firewalls: A Content Security Policy or firewall can block external scripts. If the SeaText request is blocked, the connection will not appear. Allow the SeaText domain in your policy.
Script bundling: If you bundle all JavaScript into one file, the SeaText snippet might be dropped during a build. Keep the snippet separate or confirm the bundler includes it.
Platform restrictions: Some SaaS builders block custom scripts. Source S1 explains that the script must be installed across all pages. If your platform cannot do that, the connection may fail.
Domain restrictions: Source S1 says localhost and dynamic development domains are restricted. Use a live, public domain. Each domain needs its own account.
Place the script where it can run on every page. These use cases show why placement matters.
Keep the snippet near the top of the page when possible. Test the page with a real visitor session. Then wait for the dashboard to update.
| Fact | Detail |
|---|---|
| Script activation time | Staying on page for 40 seconds needed |
| Dashboard update time | Up to 5-10 minutes |
| Domain restriction | No localhost or development URLs |
| Multiple domains | One account per domain |
| Support contact | If not connected after 10 minutes, contact support |
Possible reasons: script not installed on all pages, using a development domain, or an account mismatch. Double-check your account's primary URL matches the domain you are testing.
No. SeaText only works on live, public domains. Staging and localhost URLs are restricted for security reasons.
Yes, each unique domain or subdomain requires its own SeaText account. For example, blog.example.com needs its own account if it is a separate website.
Check that the script URL is correct and not blocked by ad blockers or browser extensions. Try disabling extensions temporarily.
After installing the script and visiting the page for 40 seconds, the dashboard updates within 5 to 10 minutes.
No. You must use a live, public domain. Localhost is blocked.
Use the exact JavaScript code provided by SeaText AI. If you serve it from a CDN, make sure your CDN does not rewrite the code. Test the network request. Check with the vendor for CDN-specific settings.
A public staging subdomain may work if you create a separate SeaText account for it. Localhost and dynamic development domains are restricted. Check with the vendor before relying on staging for a production test.
Go to the Main AI Hub after the connection is confirmed. Activate the agents you need. The dashboard will show their status, for example 'Active' next to the CRO Optimizer.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: To reconnect SeaText AI, go to your dashboard, click the reconnect button, re-enter your API key if prompted, and ensure the JavaScript snippet is still installed on your site. Then refresh your website several times and wait up to five minutes for the connection to show in your account.
To reconnect SeaText AI, go to your dashboard, click the reconnect button, re-enter your API key if prompted, and confirm the SeaText JavaScript snippet is still on your site.
When SeaText AI disconnects, you may see a message on your dashboard that the website is not linked, or the AI agents stop working. Your site may stop showing personalized content or translations. The connection status is lost, and you need to re-establish it.
SeaText AI relies on a small JavaScript snippet that lives in the <head> or <body> of every page. When a visitor loads a page, the script contacts SeaText’s servers, sends a short payload, and receives configuration data for the active agents. The script stays inert until the first page view, then becomes active for the rest of the session.
The dashboard shows a live status indicator for each domain. If the script cannot reach the servers—because it is missing, blocked, or using an outdated API key—the indicator turns red and the dashboard offers a “Reconnect” button.
Each visit or page refresh counts as an activation attempt. SeaText recommends staying on the page for at least 40 seconds to give the script time to complete the handshake. After a successful handshake, the dashboard updates within five minutes.
Before you try to reconnect, verify that the script is still present where it belongs.
seatext or the exact snippet provided in the General Integration page.When the script is missing, copy it again from the General Integration page and paste it into the appropriate location.
WPEngine provides a dedicated plugin for custom JavaScript. Follow these exact steps:
SeaText ties each account to a single primary URL. If you move your site to a new domain, you must create a new SeaText account for that domain. The old account will continue to work on the original domain but will not activate on the new one.
Development URLs such as localhost or temporary staging subdomains are blocked for security reasons. If you need to test on a staging environment, create a separate SeaText account for the staging domain and use its own script and API key.
Multiple production domains require separate accounts. The General Integration page notes this explicitly: “Each SEATEXT AI account is linked to a single primary URL.”
When you regenerate an API key in the dashboard, the old key stops working. The JavaScript snippet contains the key as a query parameter. After regeneration, you must update the snippet with the new key.
Steps to update:
If you change the script location—e.g., moving from a theme file to a plugin—you must ensure the new location loads on every page. Missing the script on even a single page will cause intermittent disconnects.
Common causes include script removal during updates, domain changes, regenerated API keys, or security restrictions on development URLs.
Only when the system prompts you. If the existing key is still valid, the reconnect button restores the link without a new key.
After refreshing your site, wait up to five minutes. If the connection does not appear after ten minutes, repeat the steps or contact support.
No. Staging URLs are blocked. Create a separate SeaText account for the staging domain and use its own script.
No. All variants, agents, and configuration remain stored in your account. Reconnecting only restores the link between the site and the account.
Open the General Integration page in your dashboard. There you will find the JavaScript code and a manual “Link Site” option.
View the page source and search for the SeaText snippet. If you cannot find it, re‑add the code from the General Integration page.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: SeaText AI confirms a successful connection with a dashboard indicator that appears next to the SeaText logo after a short visit. No visitor‑facing toast appears.
SeaText AI does not pop up a toast notification for visitors. Instead, it shows a native confirmation banner in the admin view. The banner appears next to the SeaText logo after the integration script runs.
About five minutes after you refresh the page, the top of the page displays your website name beside the SeaText logo. The text reads that the site is connected and ready for the next step. This is the only built‑in visual cue.
<head> of every page you want to power, or install the WP Engine plugin if you use WordPress.The banner tells you the script loaded correctly and the domain is linked to a valid account. Without it, the AI remains inert and cannot serve agents.
localhost or a dynamic sub‑domain. SeaText blocks local and dynamic development domains for security. Use a publicly reachable domain for the integration.https://seatext.com scripts and that no browser extensions block them.If the indicator never appears, reach out to SeaText support with the domain name and a screenshot of the page source.
Follow these steps to confirm the connection worked, even if you are not technical.
The native banner is the sole confirmation method. SeaText does not display a toast notification to site visitors. All success information is confined to the admin view next to the logo.
| Key Fact | Detail |
|---|---|
| Indicator location | Top of the page next to the SeaText logo |
| Typical appearance time | ~5 minutes after page refresh |
| Required action to see it | Visit the site and stay for at least 40 seconds |
| Supported domains | Publicly reachable domains only; localhost is blocked |
| Account per domain | One SeaText AI account per primary URL |
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Confirm integration by visiting your site and staying on a page for at least 40 seconds, then waiting five minutes for your website name to appear next to the SeaText logo in your account dashboard. If the name does not appear after ten minutes, contact support.
SeaText AI integrates through a JavaScript snippet that you paste into your site's header or via a platform-specific plugin. The script stays inert until you activate it from your SeaText account. A successful integration means the script loads on every page, the AI connects to your account, and you can manage variants and agents from the Main AI Hub.
Confirmation is the only way to know the script is working. Without it, the AI cannot optimize your pages. The script must communicate with SeaText servers. If the connection fails, no agents activate, no variants are created, and no translation or personalization happens. Confirming saves you time troubleshooting later. It also ensures your account is linked to the correct domain. Each SeaText account is tied to one primary URL. If you verify on the wrong domain, you will not see the site name. This step prevents wasted effort.
The handshake is a background process. When you visit a page with the SeaText script, the script waits for you to stay on that page for at least 40 seconds. It then sends a signal to SeaText servers. This signal includes your account ID and the domain. The server checks if the domain matches your account. If it matches, the server links the script to your account. This is why you must visit multiple pages. The script needs to load on each page. If you only visit one page, the handshake might not complete. The 40-second dwell time ensures the script has enough time to send the signal. Without it, the server cannot confirm the integration.
Paste the JavaScript snippet into your theme's header.php or use a header/footer plugin. Clear any server-side cache (WP Rocket, W3 Total Cache, host-level cache) after saving. For example, if you use WP Rocket, clear the cache from the plugin settings. Then visit your site. If the site name does not appear, the cache may have served an old version of the page. Wait a few minutes and try again.
Download and install the WP Engine plugin that allows custom JavaScript. Apply it across all pages. WP Engine's caching can delay the 40-second handshake, so purge cache before testing. Go to the WP Engine dashboard, find your site, and click "Purge Cache". Then visit your site. If the site name still does not appear, check that the plugin is active on all pages, not just the homepage.
Add the script in Online Store > Themes > Edit Code > theme.liquid, just before the closing tag. Shopify's CDN may serve cached pages; use the "View as customer" link to test on an uncached session. Also, if you use a theme with a custom header, ensure the script is not blocked by the theme's security settings. For example, some themes block third-party scripts. You may need to whitelist the SeaText domain.
Inject the snippet in your layout component so it loads on every route. Verify the script tag appears in the rendered HTML of a production build, not just in development. For a Next.js site, add the script to the _document.js file. For a Gatsby site, add it to the gatsby-ssr.js file. After deployment, open the browser console and type "document.querySelector('script[src*="seatext"]')". If it returns null, the script is not loading.
First, wait the full ten minutes. The handshake can take up to ten minutes. If the name still does not appear, check the following:
If none of these work, contact SeaText support. Provide your domain, a screenshot of the script in the page source, and the browser console output filtered for "seatext".
| Symptom | Likely Cause | Fix |
|---|---|---|
| Website name never appears | Script not on all pages or blocked by CSP | Check browser console for "Content Security Policy" errors; whitelist the SeaText domain. |
| Name appears but agents won't activate | Account not linked to this domain | Ensure you created a separate account for this domain (each account = one primary URL). |
| Variants Edit shows no URLs | AI not yet activated | Go to Main AI Hub, activate at least one agent, then revisit Variants Edit. |
| Script loads on staging but not production | Different domains, separate accounts needed | Create a second SeaText account for the production domain. |
Once you see your website name, you can proceed to the Main AI Hub. Click "Configuration" to adjust the AI parameters. You can set which pages to optimize, choose languages, and define rules. Then activate the agents you need. For example, activate the CRO Optimizer to test copy, or the Google Ads Agent to match landing pages to keywords. After activation, go to "Variants Edit" in the left panel. Select a URL and language. Here you can review, create, or manually edit translations and copy variants. This is where you see the AI's output. Check that the variants are accurate. If you need to edit, make changes directly. The AI will learn from your edits. Also, monitor the dashboard for performance data. You can see conversion lifts, traffic changes, and other metrics. This confirms the integration is working in real time.
| Fact | Detail |
|---|---|
| Integration method | JavaScript snippet or WP Engine plugin |
| Account-to-domain ratio | One account per primary URL |
| Development domains | Localhost and dynamic dev URLs restricted |
| Activation handshake | Stay on page 40+ seconds |
| Confirmation signal | Website name next to SeaText logo in dashboard |
| Timeout for confirmation | 5 minutes normal, 10 minutes max before contacting support |
| Post-confirmation steps | Open Main AI Hub → Configuration → activate agents → Variants Edit for translations |
Typically 5–10 minutes after you first visit the live site with the script installed.
Only if the subdomain is a real, public DNS record. Dynamic preview URLs (e.g., Vercel preview deployments) often fail because SeaText cannot reliably associate traffic with your account.
Deploy the snippet through the tag manager, then follow the same 40-second dwell and 5-minute wait. Ensure the tag fires on "All Pages" and not just on a subset.
No. The site name confirms the script-to-account link. Agent activation happens afterward in the Main AI Hub.
The script loads asynchronously and remains inert until activated. No measurable impact on Core Web Vitals during the verification phase.
Your domain, a screenshot of the script in your page source, and the browser console output (filter for "seatext").
No. Each subsite with its own domain needs a separate SeaText account.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Direct Answer: Install the SeaText JavaScript, revisit your site, wait at least five minutes, and confirm your website name appears next to the SeaText logo in the dashboard. This guide explains why the check matters, how the script activates, prerequisites, a step‑by‑step verification process, common mistakes, limitations, troubleshooting tips, and answers to frequent follow‑up questions.
Confirming the connection proves that the SeaText script is live on your pages. Only a live script can start the AI agents that rewrite copy, translate content, and protect ad spend. Without verification you cannot activate any agent.
Verification also protects you from wasting time on configuration when the script never loaded. The dashboard shows a clear visual cue: your site name next to the SeaText logo.
SeaText provides a small JavaScript snippet. You paste it into the head of every page or use a tag manager. The script stays inert until a real visitor loads the page. The first visit triggers a handshake with SeaText servers. After the handshake the dashboard updates.
The handshake needs a real domain. Localhost or dynamic development URLs are blocked for security. Each domain requires its own SeaText account.
<head> of every page or deploy via your tag manager. Publish the changes.Skipping the 40‑second stay on the page. The script needs a real session to register.
Using a development URL such as localhost. Those URLs are restricted and will never show the connection cue.
Adding the snippet only to a subset of pages. The dashboard expects the script on the primary domain entry page.
Creating one account for multiple domains. Each domain needs its own account.
The visual cue only confirms that the script loaded and communicated with SeaText. It does not verify that individual AI agents are turned on or configured correctly.
If you have multiple subdomains under the same primary domain, a single account works. Separate primary domains require separate accounts.
The dashboard does not expose an API health endpoint. Verification must be done through the UI as described.
If the name never appears, first confirm the script is present in the page source. Use the browser developer tools to search for the SeaText snippet.
Check that the domain matches exactly the one registered in the SeaText account (including www vs non‑www).
Clear browser cache and reload the page, then wait the full five minutes again.
If the problem persists after ten minutes, open a support ticket. Provide the exact URL and a screenshot of the page source showing the snippet.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.