Quick Answer: Two Checks Confirm SeaText Is Live

You need two pieces of evidence to know SeaText is really running on your Weebly site, not just installed. First, open your SeaText account dashboard and confirm your website name appears next to the SeaText logo at the top of the page. Second, view the source code of a live Weebly page and find the SeaText JavaScript snippet in the footer.

If both checks pass, SeaText is active. If either fails, follow the diagnostic steps below to find the break.

Step 1: Check the SeaText Dashboard for Active Status

Log in to your SeaText account. Look at the top of the page, next to the SeaText logo. Your website name should be displayed there.

This is the first and most reliable signal. The dashboard only shows your website name after SeaText has detected real traffic from your domain and linked that traffic to your account.

If you just installed the script, wait at least five minutes. SeaText needs time to register your site. If the name still does not appear after 10 minutes, contact SeaText support. That delay usually means the script is not firing correctly on your Weebly pages.

Step 2: Verify the Script Is in Your Weebly Footer Code

Open your Weebly editor. Go to Website > Edit Site, then click Settings and open the SEO section. Find the Footer Code field.

Confirm the SeaText JavaScript snippet is still there. A common mistake is pasting the code into the header or a page-level code block instead of the site-wide footer. The footer placement is required for SeaText to load on every page.

If the code is missing, copy it again from your SeaText account page and paste it into the Footer Code field. Click Save, then Publish.

Step 3: View the Page Source on a Cache-Free Page

Open your live Weebly site in a browser. Right-click the page and choose View Page Source. Search for "seatext" or a recognizable part of the JavaScript snippet.

If you do not see it, do not panic yet. Your browser or a caching layer may be serving an old version of the page. Open a private or incognito window and check again. You can also add a query string like ?check=1 to the URL to bypass some caches.

If the script appears in the source but the dashboard still shows no website name, the issue is likely activation, not installation.

Step 4: Trigger Activation with Real Page Visits

SeaText does not activate the moment the script loads. The AI remains inert until it sees real visitor behavior. Visit or refresh your website several times and stay on a page for at least 40 seconds each time.

This tells SeaText that a real human is on the page. After those visits, wait five minutes and check the dashboard again. Your website name should appear next to the SeaText logo.

If it still does not appear after 10 minutes, contact SeaText support. The installation may have a platform-specific issue that needs manual help.

Step 5: Confirm the AI Is Active on Specific Pages

Seeing your website name in the dashboard means the connection works. It does not mean every AI feature is running on every page. Go to the Main AI Hub in your SeaText account and check which pages have an active AI agent.

Click Configuration to review the AI parameters for each page. If a page shows no active agent, you need to activate it manually. SeaText gives you control over which pages the AI touches.

Common Mistake: Confusing Installation with Activation

The most frequent error is assuming that pasting the script means SeaText is running. Installation is only step one. Activation requires real page visits and a dashboard confirmation.

Another common mistake is checking the dashboard immediately after publishing. SeaText needs time to see traffic. Wait at least five minutes, and make sure you have actually visited the site yourself.

How to Verify the Next Step

After you confirm the script is in the footer and the dashboard shows your website name, test one page. Open that page in a private window, stay for 40 seconds, and then check the Main AI Hub to see if that page shows an active agent.

If the page shows active, SeaText is running on that page. Repeat the check for any page where you expect AI behavior.

What Changes If You Skip This Check

If you skip verification, you may believe SeaText is optimizing your site when it is actually inert. The script can be present but never activated. That means no AI SEO, no copy adaptation, and no conversion work is happening.

You would also miss installation errors. A missing footer code or a wrong domain setting can silently break the integration. The dashboard check catches those problems before they cost you traffic or conversions.

Key Facts About SeaText on Weebly

Limitations and When This Advice Does Not Apply

This verification process assumes you have already created a SeaText account and pasted the script into the correct Weebly field. If you have not completed installation, start there.

Development URLs such as localhost are restricted for security reasons. SeaText will not activate on those domains. Use a valid, real domain for testing.

If you use a development domain and a production domain, you need separate SeaText accounts. One account is linked to a single primary URL.

Dynamic development domains may not work reliably. SeaText may be unable to associate traffic with your account if the domain changes frequently.

Terminology

Footer Code: A Weebly field that injects HTML or JavaScript into the bottom of every page on your site. SeaText requires this placement.

Activation: The moment SeaText links real visitor traffic from your domain to your account. The script is inert until this happens.

Main AI Hub: The SeaText control panel where you activate and configure AI agents on specific pages.

Frequently Asked Questions

Why does my SeaText dashboard not show my website name?

Usually because the script is not in the Weebly footer, the site has not been visited for at least 40 seconds, or you checked before the five-minute wait. Check the footer code first, then visit the site and wait.

How long does SeaText take to activate on Weebly?

After you visit or refresh your site several times and stay at least 40 seconds per page, wait five minutes. If the dashboard still shows no website name after 10 minutes, contact support.

Can I test SeaText on a localhost or development URL?

No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain. If you need a development and production domain, create separate SeaText accounts.

What if the script is in the footer but SeaText still does not run?

Check that you published the changes in Weebly. Then visit the live site in a private window and stay on a page for 40 seconds. If the dashboard still shows nothing after 10 minutes, contact SeaText support.

Does SeaText run automatically on every Weebly page?

No. The script loads on every page, but you must activate the AI on your preferred pages in the Main AI Hub. Use the Configuration section to adjust parameters per page.

Can I use one SeaText account for multiple Weebly sites?

No. Each SeaText account is linked to a single primary URL. Create one account for each website you want to use SeaText on.

Set Up Multiple Locations in the Square Sandbox

Before you can test multi-location behavior, you need more than one location in your sandbox account. Square automatically creates a main location when you sign up for a sandbox account. To add additional locations, use the Square Dashboard or the Locations API.

• Using the Dashboard: Log in to your Square Developer Dashboard, navigate to the sandbox account, and go to Locations. Click Create Location and fill in the details (name, address, time zone). You can create locations that represent different physical stores, online marketplaces, or warehouses.
• Using the Locations API: Call the CreateLocation endpoint with a valid access token from your sandbox application. The request body must include a location object with at least a name and country. The API returns the new location's ID, which you will use in subsequent tests.

After creating the locations, list them using the ListLocations endpoint to confirm they all appear and have unique IDs. This step verifies that your integration can retrieve the full list of locations.

Test Transactions Per Location

Each payment, order, or checkout request in Square requires a location_id. To test multi-location support, you must send requests using different location IDs and confirm the data is recorded under the correct location.

1. Create a test payment for Location A: Use the CreatePayment endpoint with the location ID of your first sandbox location. Use a test card number (e.g., 4111111111111111) and a nonce generated from the Square Sandbox. The response should include the location ID you sent.
2. Create a test payment for Location B: Repeat the same process but use the location ID of your second sandbox location. Use a different test card or the same one — the key is that the location ID changes.
3. Verify in the Sandbox Dashboard: Log in to your sandbox account and go to the Transactions or Payments section. Filter by location. You should see each payment under its respective location. If both payments appear under the same location, your integration is not passing the location ID correctly.

This test confirms that your integration can create transactions for any location and that Square correctly attributes them.

Test Data Retrieval Per Location

Multi-location integrations often need to fetch data for a specific location — for example, retrieving all orders for a particular store. Square's ListOrders, ListPayments, and SearchCatalogObjects endpoints all support filtering by location.

• List orders for Location A: Call ListOrders with the location ID of Location A. The response should include only orders created under that location.
• List orders for Location B: Repeat with Location B's ID. The response should be different (or empty if no orders exist).
• Search catalog items by location: If your integration uses location-specific pricing or inventory, call SearchCatalogObjects with a location filter. Verify that items with location-specific overrides appear correctly.

If your integration retrieves data without a location filter, it may return data from all locations. That is acceptable for some use cases, but you must ensure you can isolate data per location when needed.

Test Location-Specific Inventory

Square supports tracking inventory at the location level. To test this, create an inventory item and adjust its quantity for each location separately.

1. Create a catalog item using the UpsertCatalogObject endpoint. Set track_quantity to true.
2. Set inventory for Location A: Call BatchChangeInventory with the location ID of Location A and a positive quantity change (e.g., +10).
3. Set inventory for Location B: Call the same endpoint with Location B's ID and a different quantity (e.g., +5).
4. Retrieve inventory counts: Use RetrieveInventoryCount with the catalog object ID and each location ID. The counts should differ, confirming that inventory is tracked per location.

This test is critical for businesses that sell the same product in multiple stores and need accurate stock levels per location.

Test Location-Specific Settings and Configurations

Square allows you to configure different settings per location, such as business hours, payment processing options, and tax rates. Your integration should respect these differences.

• Retrieve location details: Call RetrieveLocation for each location ID. Verify that fields like business_hours, timezone, and capabilities are correct.
• Test location-specific taxes: If you have set up different tax rates for different locations, create an order for each location and confirm the tax calculation matches the expected rate.
• Test location-specific payment methods: Some locations may support different payment methods (e.g., cash vs. card). Use the ListPaymentMethods endpoint (if available) or check the location's capabilities.

If your integration ignores location-specific settings, it may apply incorrect taxes or offer unavailable payment methods, leading to errors in production.

Test Webhooks for Multiple Locations

Square sends webhooks for events like payment created, order updated, or inventory changed. Each webhook payload includes a location_id field. Your integration must use this field to route the event to the correct location's data pipeline.

1. Set up a webhook endpoint in your sandbox application. Use a tool like webhook.site or your own server.
2. Trigger events for different locations: Create a payment for Location A, then create a payment for Location B. Check the webhook payloads. Each should contain the correct location_id.
3. Verify your handler logic: Ensure your code reads the location_id and processes the event accordingly. A common mistake is to ignore the location ID and update a single data store, which would mix data from different locations.

This test ensures that your integration can handle real-time updates correctly when multiple locations are active.

Common Mistakes and How to Avoid Them

Even experienced developers make errors when testing multi-location integrations. Here are the most frequent pitfalls:

• Using the main location ID for everything: Some developers hardcode the main location ID during testing and forget to make it dynamic. Always use a variable for the location ID.
• Not testing with multiple locations in the sandbox: If you only test with one location, you won't catch issues where the location ID is missing or incorrect.
• Ignoring location ID in webhook handlers: Webhooks include a location ID, but if your handler ignores it, you may update the wrong location's data.
• Assuming all locations have the same settings: Tax rates, business hours, and payment methods can differ. Test with locations that have different configurations.

To avoid these mistakes, create a test plan that covers at least two locations with different settings and run all your test cases against both.

Key Facts About Square Multi-Location Testing

Fact	Details
Sandbox environment	Square provides a free sandbox for testing. You can create multiple locations within a single sandbox account.
Location ID required	Every API call that creates or retrieves data must include a valid location ID.
Test card numbers	Use Square's test card numbers (e.g., 4111111111111111) to simulate payments. They work in the sandbox only.
Webhook payloads	Each webhook includes a location_id field. Your handler must use it to route the event.
Inventory tracking	Inventory is tracked per location. You must specify the location ID when adjusting or retrieving stock.
Location-specific settings	Tax rates, business hours, and payment methods can vary by location. Test with different configurations.

Limitations of Sandbox Testing

The Square Sandbox is a powerful tool, but it has limitations you should know before moving to production.

• No real payments: You cannot process actual credit card transactions. Use test card numbers only.
• Limited data retention: Sandbox data may be periodically reset. Do not rely on it for long-term testing.
• No real-time processing: Some features, like instant transfers, are not available in the sandbox.
• Rate limits: The sandbox has lower rate limits than production. If you are load testing, use production credentials carefully.

Despite these limitations, the sandbox is sufficient for validating multi-location logic. Plan to run a final verification in production with a small test transaction before going live.

Frequently Asked Questions

How do I create multiple locations in the Square Sandbox?

Use the Square Developer Dashboard: navigate to your sandbox account, go to Locations, and click Create Location. Alternatively, use the CreateLocation API endpoint with a valid sandbox access token.

Can I use the same test card for multiple locations?

Yes. Test card numbers work for any location in the sandbox. The location ID in the request determines which location the payment is attributed to.

What happens if I forget to include a location ID?

Square returns an error. Most endpoints that require a location ID will return a 400 BAD_REQUEST with a message like "location_id is required".

Do webhooks include the location ID?

Yes. Every webhook payload from Square includes a location_id field. Your webhook handler must read this field to process the event for the correct location.

How do I test location-specific inventory?

Create a catalog item with inventory tracking enabled. Then use BatchChangeInventory with different location IDs to set stock levels. Retrieve counts with RetrieveInventoryCount to verify.

Can I test location-specific tax rates in the sandbox?

Yes. Set up different tax rates for different locations in the sandbox Dashboard. Then create orders for each location and verify the tax calculation.

What is the most common mistake when testing multi-location integrations?

Hardcoding the main location ID and not testing with multiple locations. Always use a variable for the location ID and test with at least two locations.

Further reading and comparison sources

These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.

• How to Integrate Square With Jotform
• Test Square APIs in the Sandbox
• Locations API

Yes, you can add the SeaText code to Odoo without editing source files. The simplest route is Odoo's built-in Embed Code block inside the Website builder. A second option is a third-party header/footer injection module from the Odoo Apps store. Both approaches let you paste the JavaScript snippet through the Odoo interface — no file access, no command line, no custom module development required.

Why no-code integration matters for Odoo users

Odoo is a powerful ERP, but many teams do not have a developer on staff. Editing source code is risky. A single mistake can break the entire system. It also makes future Odoo updates harder. When you edit core files, you must reapply those changes after every upgrade.

No-code methods avoid all that. You work inside the Odoo interface. The system stays clean. Updates apply without conflict. This is the key reason to choose the Embed Code block or an injection module over custom development.

SeaText is designed to work this way. The installation process is secure. The AI remains inert until you activate it in your SeaText dashboard. That means the snippet itself does not alter your content until you turn features on. You keep full control.

How the Embed Code method works

Odoo's Website module includes a Dynamic Content section in its block palette. One of those blocks is called Embed Code. You drag it onto any page, click Edit, paste the SeaText snippet, and save. The block can be set to Hide on Desktop in the Visibility settings so the script runs without showing a visible element.

This is a standard Odoo feature, not a SeaText-specific workaround. It works on Odoo Online, Odoo.sh, and on-premise installations that have the Website module installed.

The Embed Code block is part of Odoo core. No extra installation is needed. You do not need to touch any Python files, XML views, or JavaScript assets. This is the most direct no-code path.

Step-by-step integration using Odoo's website builder

1. Log in to your Odoo account and open the Website module from the dashboard.
2. Navigate to the page you want to edit (usually the homepage or a layout template) and click Edit to open the editing panel.
3. In the left-hand Blocks panel, scroll to the Dynamic Content section.
4. Drag the Embed Code module into the desired location on the page.
5. Once the module is placed, click on the Edit button located in the right panel to input the code.
6. In the pop-up window that appears, paste the code snippet provided by SeaText AI into the designated area, then click Save to apply the changes.
7. To ensure the block is hidden from view on desktop devices, select the Hide on Desktop option in the Visibility section. After making this adjustment, click on Save once more to finalize your changes.

These steps are drawn directly from SeaText's Odoo integration guide. The Embed Code block is part of Odoo core, so no extra installation is needed.

Before you start, you need a SeaText AI account. If you do not have one yet, create it first. Then copy the JavaScript code from your SeaText dashboard. That is the snippet you will paste into the Embed Code block.

Alternative: Header/Footer injection modules

If you prefer the script to load on every page without adding a block to each layout, install a header/footer injection module from the Odoo Apps store. Search for "header footer code injection" or "custom code injection." Popular free options include Website Header Footer Code and Custom Code Injection. After installation, you'll find a configuration menu under Website → Configuration → Custom Code (or similar) where you can paste the SeaText snippet into the Head or Body field. This method is useful when you manage multiple websites in one Odoo database and want a single place to control the script.

This approach is better when you need site-wide coverage. The Embed Code block only loads on the specific page where you place it. An injection module loads on every page automatically. That saves time if you have many pages.

It also gives you a central control point. You change the snippet in one place. The update applies everywhere. This is ideal for multi-website setups where each website needs its own SeaText account and snippet.

Decision criteria: Which method should you choose?

Choosing between the Embed Code block and an injection module depends on your situation. Here is a simple comparison.

Use the Embed Code block if you only need SeaText on one page. Use an injection module if you need it everywhere. If you run multiple websites in one Odoo database, the injection module is usually the better fit. Check with the vendor for per-website configuration support.

When you might need developer help

• Content Security Policy (CSP) blocks inline scripts. If your Odoo instance enforces a strict CSP, the Embed Code block may be blocked. You'll need a developer to add the SeaText domain to the CSP allowlist or to load the script via a non-inline method.
• Multi-website setups with different domains. SeaText requires a separate account per primary domain. If you run several domains on one Odoo database, you'll need logic to load the correct snippet per website — typically a small custom module or a template override.
• Development or staging environments on localhost. SeaText restricts localhost and dynamic development domains for security. You must use a real, publicly resolvable domain (e.g., staging.example.com) for the script to activate.
• Backend portal or checkout pages. The Website builder only edits frontend website pages. For backend portal or checkout pages, you would need a custom module or a header/footer injection module that targets those routes — which typically requires developer assistance.

Key facts

Limitations and considerations

The Embed Code block loads the script on the specific page where you place it. If you need the script on every page, add the block to a global layout template (e.g., the main layout) or use the header/footer injection module. The Hide on Desktop setting only affects visual rendering; the JavaScript still executes. SeaText's documentation notes that the AI remains inert until activated in your SeaText dashboard, so the snippet itself does not alter content until you turn features on.

If you use Odoo's Website Multi-Company or Multi-Website features, each website needs its own SeaText account and snippet. The Embed Code block must be configured per website, or the injection module must support per-website configuration.

SeaText's edge deployment via Cloudflare adds near-zero latency. The script loads asynchronously. No site rebuilds are required. This means you do not need to worry about slowing down your Odoo site.

One more thing to keep in mind: the snippet is a loader. It pulls the latest configuration from SeaText's edge network. Feature updates happen in the dashboard. You do not need to update the snippet when SeaText releases new features.

Verification steps

1. After saving the Embed Code block or injection module, visit the front-end page in an incognito browser window.
2. Open browser DevTools → Console. You should see a SeaText initialization log (e.g., "SeaText AI loaded") without errors.
3. Log in to your SeaText dashboard. The domain status should change from "Pending" to "Active" once the script fires.
4. If you see CSP errors in the console, contact your Odoo administrator or hosting provider to allow the SeaText script domain.

Verification is quick. It takes less than a minute. Do it right after installation to catch any issues early.

FAQ

Does the Embed Code block work on Odoo Online (SaaS)?

Yes. The Website module and Embed Code block are available on Odoo Online, Odoo.sh, and on-premise installations.

Can I add the script to the checkout or portal pages?

The Website builder only edits frontend website pages. For backend portal or checkout pages, you would need a custom module or a header/footer injection module that targets those routes — which typically requires developer assistance.

What if I have multiple languages on one Odoo website?

One SeaText snippet works across all languages on the same domain. SeaText's translation agent handles 125 languages automatically once activated.

Will the script slow down my Odoo site?

The SeaText script loads asynchronously. SeaText's edge deployment via Cloudflare adds near-zero latency. No site rebuilds are required.

Can I test on a staging subdomain before going live?

Yes, but you must use a real subdomain (e.g., staging.yourdomain.com). Localhost and dynamic dev domains are restricted for security.

Do I need to update the snippet when SeaText releases new features?

No. The snippet is a loader that pulls the latest configuration from SeaText's edge network. Feature updates happen in the dashboard.

What happens if I uninstall the Website module later?

The Embed Code block and its content will be removed. If you used a header/footer injection module, the snippet persists as long as that module remains installed.

Do I need a SeaText account before installing the script?

Yes. You need a SeaText AI account first. Create one, then copy the JavaScript code from your dashboard. That is the snippet you paste into Odoo.

Can I use SeaText on multiple domains?

Yes, but you must create a separate account for each domain. Each SeaText account is linked to a single primary URL. This applies to development and production domains alike.

Is the installation process secure?

Yes. The installation is secure. The AI remains inert until you activate it. Your website's content integrity is preserved.

Answer: You cannot customize SeaText variants directly in the Squarespace editor

SeaText variants are edited in the SeaText dashboard, not in Squarespace's native page editor. After you paste the SeaText JavaScript snippet into Squarespace's Code Injection (HEADER), the script runs on your live site. You then log in to SeaText, open the Main AI Hub, click "Configuration", and adjust the AI parameters or manually edit the generated variants. Those changes appear on your Squarespace pages automatically without any further code edits.

This article walks you through the exact steps to set up the integration and customize variants, plus what to check if something doesn't work.

Prerequisites: What you need before customizing

• A SEATEXT AI account. If you don't have one, create it first.
• Access to your Squarespace dashboard with permission to edit site settings.
• A published Squarespace site on a real domain (not localhost).
• At least 40 seconds of active page time on your site after installation to activate the AI.

Step-by-step: Install SeaText on Squarespace

1. Copy the JavaScript code from your SEATEXT AI account. The code appears in the integration section after you log in.
2. Open your Squarespace dashboard and go to the website panel. Click the three dots icon and select Settings.
3. Navigate to Developer Tools at the very end of the Settings page.
4. Click "Code Injection" to open the area for custom code.
5. Paste the JavaScript snippet into the HEADER field.
6. Click "Save" to preserve your changes.
7. Publish your website to apply the changes.

Step-by-step: Activate and customize SeaText variants

1. Visit or refresh your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your account.
2. Wait at least five minutes until you see your website name next to the SEATEXT logo at the top of the SeaText dashboard. If it doesn't appear after 10 minutes, contact support.
3. Go to the Main AI Hub and activate the AI on your preferred pages.
4. Click "Configuration" to adjust the AI parameters. This is where you control how variants are generated.
5. Edit the initial variants that SeaText provides. You can manually tweak the automatic translations and variants for testing.

How to verify your customization is working

After you make changes in the SeaText dashboard, refresh your Squarespace site and check the specific page you edited. The variant should appear as you set it. If it doesn't, revisit the Code Injection area to confirm the script is still there, and check that your site is published. Also, ensure you waited the required time for the AI to activate.

Key facts about SeaText and Squarespace

Limitations and when this advice doesn't apply

This customization method only works if you have a SeaText account and have installed the script. If you haven't installed SeaText, you cannot customize variants in the Squarespace editor. Also, if you use a development domain like localhost, SeaText won't function properly. For multiple websites, you need separate accounts. The AI remains inert until activated, so you must complete the activation steps.

Why this matters for Squarespace site owners

Squarespace gives you a visual page builder, but it does not expose the dynamic copy that SeaText generates. SeaText's value is real‑time variant testing, personalization, and translation across 125 languages. By moving variant editing to the SeaText dashboard you gain a single place to manage all AI‑driven copy changes without touching Squarespace templates. This matters when you run A/B tests, adapt headlines for ad campaigns, or serve localized content to international visitors. The separation also means you can roll back or pause variants instantly from SeaText without redeploying your Squarespace site.

How the integration works under the hood

When you paste the SeaText snippet into the HEADER via Code Injection, the script loads on every page view. It reads the page DOM, identifies text blocks, and sends them to SeaText's edge network. The edge network runs the AI models (translation, CRO, personalization) and returns variant HTML that the script injects into the page before the browser paints. Because the injection happens client‑side at the edge, there is zero flicker and no server‑side changes to Squarespace. The dashboard simply stores the configuration you set (tone, language, test rules) and pushes updates to the edge network in real time.

Trade‑offs: external dashboard vs native editing

Pros: Centralized control for all sites, version history, AI‑assisted suggestions, and instant deployment across pages. Cons: You must leave Squarespace to edit copy, which adds a context switch. Team members who only have Squarespace access cannot tweak variants unless they also get SeaText credentials. If SeaText experiences downtime, variant updates pause, though the last‑known variants continue to render. Evaluate whether your workflow can accommodate a second dashboard before committing.

Practical use cases for Squarespace users

• Ad‑campaign alignment: Match landing‑page headlines to each Google Ads keyword without creating duplicate Squarespace pages.
• Multilingual rollout: Translate the entire site into 125 languages and edit any translation manually in the dashboard.
• Conversion‑rate testing: Run continuous A/B tests on headlines, CTAs, and product descriptions; SeaText automatically scales winners.
• Personalized offers: Show different copy to visitors from email, social, or referral sources using the Visitor Source Rewrite agent.

Limitations in detail

• Development domains such as localhost or staging subdomains are blocked for security; you must use a production‑grade domain.
• Each primary domain requires its own SeaText account; you cannot share a single account across multiple Squarespace sites.
• Activation delay: after script install you need 40 seconds of active page time plus up to 10 minutes for the dashboard to register the site.
• No native Squarespace preview of variants; you must publish and view the live site to see changes.
• If you remove the Code Injection snippet, all SeaText variants disappear instantly.

Common pitfalls and how to avoid them

• Pasting the script into the FOOTER instead of HEADER – the script must load early to rewrite copy before paint.
• Forgetting to publish the Squarespace site after saving Code Injection – changes only apply on the live site.
• Not waiting the full activation window – the dashboard will show "Not connected" until the 5‑minute handshake completes.
• Using a single SeaText account for two domains – the second domain will never connect; create a separate account.
• Editing the same text block in both Squarespace and SeaText – SeaText's variant overwrites the Squarespace content on each load, so keep the master copy in SeaText.

Terminology you might encounter

• Code Injection: A Squarespace feature that lets you add custom code to your site's header or footer.
• Main AI Hub: The SeaText dashboard where you manage AI agents and configurations.
• Variants: Different versions of your page copy generated by SeaText for testing or personalization.

Frequently asked questions

Do I need to edit code in Squarespace to customize variants?

No. You only paste the SeaText script once. After that, you customize variants in the SeaText dashboard, not in Squarespace's code editor.

Can I edit variants directly on the Squarespace page editor?

No. The Squarespace editor doesn't show SeaText variants. You edit them in the SeaText dashboard, and they appear on your site automatically.

How long does it take for SeaText to start working?

After installing the script, you need to visit your site for at least 40 seconds. Then wait about five minutes for the connection to show in your dashboard.

What if I don't see my website name in SeaText after 10 minutes?

Contact SeaText support immediately. It could indicate an installation issue.

Can I use SeaText on multiple Squarespace sites?

Yes, but you need a separate SeaText account for each domain.

Is there a cost to customize variants?

SeaText offers pricing plans. Check the SeaText pricing page for details.

Typically 2–8 hours for basic CORS configuration on shared‑parent‑domain setups, plus 1–2 days when a custom proxy or edge worker is required for complex domain topologies; effort scales with the number of origins, authentication strategy, and backend control. SeaText's SPA integration documentation flags a single cross-origin consideration: if your single-page application interacts with multiple domains, you must ensure the SeaText script loads and executes without being blocked by browser same-origin policies.

What "cross-origin" means for SeaText in an SPA

SeaText injects a lightweight JavaScript snippet into your page. That snippet reads URL parameters (UTM tags, ValueTrack tokens), writes to localStorage, and communicates with SeaText's backend to rewrite headlines, offers, and translations. When your SPA spans multiple domains — for example, app.example.com, checkout.example.com, and blog.example.com — the browser treats each origin as separate. If the snippet loads from one origin but tries to read cookies, storage, or make fetch calls to another, the browser blocks the request unless explicit CORS headers or a proxy are in place.

Key cost drivers

• Number of distinct origins: Each additional domain or subdomain adds a CORS header set or proxy route.
• Control over backend responses: If you own all APIs, you can add Access-Control-Allow-Origin headers directly. If third‑party APIs are involved, you may need a proxy.
• Authentication strategy: Shared cookies across subdomains work with SameSite=None; Secure and a common parent domain. Separate domains often require token passing or a proxy that forwards credentials.
• Existing infrastructure: Teams with a CDN (Cloudflare, CloudFront, Fastly) or edge‑worker platform can add CORS headers or rewrite rules in minutes. Teams without edge infrastructure must build or deploy a proxy service.
• Testing matrix: Every origin combination needs verification in Chrome, Firefox, Safari, and mobile browsers. Safari's Intelligent Tracking Prevention (ITP) can add edge cases.

Typical effort tiers

Step-by-step scoping checklist

1. Map every origin your SPA touches — include marketing subdomains, checkout, help center, and any iframe embeds.
2. List which origins serve the SeaText snippet and which origins receive SeaText network requests.
3. Check current CORS headers on each backend endpoint (curl -I -X OPTIONS).
4. Determine cookie / token strategy: shared parent domain cookie, JWT in localStorage, or header‑based auth.
5. Choose tier: if all origins are yours and share a parent domain, start with Tier 1. If you have a CDN, Tier 2. Otherwise plan Tier 3.
6. Write a test matrix: each origin × each browser × authenticated / unauthenticated states.
7. Allocate time for Safari ITP edge cases (usually 1–2 extra hours).

Common mistakes that inflate effort

• Assuming Access-Control-Allow-Origin: * works with credentials — it does not; you must echo the requesting origin.
• Forgetting preflight (OPTIONS) handling on non‑simple requests (custom headers, application/json body).
• Testing only in Chrome; Safari and Firefox handle third‑party storage and CORS differently.
• Not accounting for SeaText's localStorage usage — if the snippet loads on app.example.com but the user first lands on blog.example.com, the ID may not persist across origins without shared storage or a proxy.

Practical scenarios

Scenario A: SaaS app with marketing site on separate domain

app.acme.com (React SPA) and acme.com (Next.js marketing). Both served via Vercel. SeaText snippet loads on marketing pages; user signs up and lands in app. Effort: Tier 2 — add Vercel Edge Function to proxy SeaText snippet network requests from app to marketing origin, or configure vercel.json headers. Approx. 6 hours.

Scenario B: E‑commerce with separate checkout domain

shop.example.com (SPA) and pay.example.com (hosted checkout, third‑party). You control shop; checkout is Stripe/Shopify. SeaText must track user from shop through checkout. Effort: Tier 3 — deploy Cloudflare Worker that reads SeaText ID from shop's cookie, passes it as a header to checkout, and forwards SeaText snippet network requests. Approx. 1.5 days.

Scenario C: Multi‑brand platform, shared SeaText account

Five brands, each on its own apex domain, all using the same SeaText project. SeaText snippet must load on all five. Effort: Tier 2 if you have a CDN (add CORS headers per origin), Tier 3 if not. Roughly 1 day with CDN, 2 days without.

Limitations of this estimate

• Estimates assume a developer familiar with CORS, service workers, and your deployment pipeline. Ramp‑up time for junior engineers can add 50 %.
• SeaText's documentation only states: "ensure that the SEATEXT AI script is compatible and does not face cross‑origin issues." It does not prescribe a specific architecture.
• Third‑party checkout or auth providers (Auth0, Firebase, Stripe) may impose their own CORS restrictions that cannot be changed.
• Safari ITP updates can break cross‑origin storage strategies without notice; budget ongoing maintenance.
• These figures exclude QA, staging deployment, and rollback planning.

Terminology

• Origin: Scheme + host + port (e.g., https://app.example.com).
• CORS: Cross‑Origin Resource Sharing — browser mechanism that allows servers to declare which origins may load their resources.
• Preflight: An OPTIONS request the browser sends before the actual request when the request uses non‑simple methods or headers.
• Edge worker: Serverless function that runs at CDN edge locations (Cloudflare Workers, Vercel Edge Functions, AWS Lambda@Edge).
• SeaText network request: The background call the SeaText snippet makes to report events and fetch variant data.

FAQ

Can I avoid a proxy by hosting the SeaText snippet on each domain?

The snippet is delivered from SeaText's servers; self‑hosting is not documented. You can only control how your backends respond to the snippet's network requests.

Does SeaText support postMessage for cross‑origin communication?

The source pack does not mention postMessage. Assume the snippet uses standard fetch/XHR and localStorage. If you need postMessage, you would need a custom wrapper — adding Tier 3 effort.

What if I only have one domain but multiple subdomains?

That is Tier 1. Set cookie domain to .example.com and ensure API responses include Access-Control-Allow-Origin: https://app.example.com (echo the request origin). 2–4 hours typical.

How do I verify the fix works?

Open DevTools Network tab on each origin. Confirm SeaText script loads (200), network requests return 200/204, and no CORS errors appear in Console. Test in Safari private mode to catch ITP issues.

Can I use a shared localStorage polyfill like localForage with an iframe bridge?

Possible, but adds complexity and fragility. A proxy or edge worker is more maintainable. Count as Tier 3 effort.

Does SeaText provide a test endpoint for CORS validation?

Not documented in the source pack. Use your own staging endpoints to validate headers before pointing at production.

What is the ongoing maintenance burden?

Low for Tier 1 (header changes rarely). Moderate for Tier 2/3: CDN rule updates, proxy dependency upgrades, Safari ITP monitoring. Budget 2–4 hours per quarter.

The best website types for authority links are category-relevant sites with compatible audiences — specifically high-authority blogs, news outlets, and educational domains in your niche. These pass the most link equity because they share topical context and reader intent with your site.

Not all high-DR domains are equal. A DR 80 marketing blog helps a marketing SaaS more than a DR 80 recipe site. The deciding factors are topical overlap, audience match, and editorial context — not raw authority metrics alone.

What Makes a Website Type "Authority-Worthy" for Link Building

Authority-worthy websites share three traits: they publish editorial content (not link farms), they attract the same readers you want, and they link out naturally within articles. Google evaluates links by the relevance of the linking page to the linked page. A link from a university research page about your topic carries more weight than a link from a general directory with higher DR.

SeaText's Authority Builder operates on this principle: it only matches websites in your category that serve a compatible audience and make sense for the same reader. Every published link is 100% dofollow on a SeaText-controlled subdomain, placed in a useful editorial context.

The Three Core Categories of High-Value Link Targets

1. Niche Editorial Blogs and Publications

Industry blogs, trade publications, and specialist magazines that publish original reporting, analysis, or tutorials. They link to sources, tools, and case studies naturally. Their readers are your prospects.

2. News Sites With Topic Verticals

Major news outlets often have dedicated sections (technology, health, finance). A link from a relevant vertical passes authority and drives qualified referral traffic. These sites have high trust but strict editorial standards.

3. Educational and Institutional Resource Pages

University departments, research centers, government agencies, and professional associations maintain resource pages for their audiences. Links here signal trust. They rarely link commercially, so your content must be genuinely educational.

How to Evaluate Any Website Type Using Five Decision Criteria

Trade-Offs Between Link Target Types: A Quick Comparison

Takeaway: If you need consistent, relevant links with controllable effort, category-matched exchange networks (like SeaText's Authority Builder) outperform manual outreach on effort-to-result ratio. For brand-defining authority signals, invest in news and educational targets.

Step-by-Step Framework for Selecting Your Best Targets

1. Map your category. List the 5-10 topics your ideal customers search. These define your relevance filter.
2. Set authority floor. Decide minimum DR/DA (e.g., 40+) but treat it as a floor, not a target.
3. Run the five criteria. Score each candidate site on the table above. Discard any that fail two or more.
4. Prioritize by acquisition path. Group targets: "pitch article," "resource page request," "exchange network." Allocate weekly hours to each.
5. Track link quality, not count. Monitor referring domain relevance, traffic from links, and ranking movement for target keywords.
6. Re-evaluate quarterly. Sites change. A blog that accepted guest posts may become a link farm. Re-score annually.

Common Mistakes When Choosing Link Targets

• Chasing DR alone. A DR 70 general directory passes less equity than a DR 45 niche blog.
• Ignoring audience fit. Links from sites your buyers never visit waste effort.
• Accepting reciprocal requirements. Google discounts reciprocal link schemes. SeaText's Authority Builder explicitly avoids this: no outreach list, paid link list, or reciprocal-link requirement.
• Overlooking link neighborhood. Your link on a page full of casino and pharma links harms more than helps.
• Treating all "guest posts" equally. Many sites sell guest posts with no editorial review. Those are paid links, not authority links.

Limitations: When This Advice Doesn't Apply

• New sites with zero authority. You may need foundational links (citations, profiles, partnerships) before targeting high-authority editorial sites.
• Highly regulated industries (medical, legal, finance). Educational and government links may require credentials you don't have. Focus on accredited professional associations instead.
• Local service businesses. Hyper-local directories, chamber of commerce, and neighborhood blogs often outweigh national authority sites for map-pack rankings.
• Sites penalized for link schemes. Clean up toxic links first. Adding authority links on a penalized foundation yields diminishing returns.

Key Terminology

• Dofollow link: A standard hyperlink that passes PageRank. All Authority Builder placements are 100% dofollow.
• Link equity: The ranking power transferred from one page to another through a link.
• Topical relevance: The semantic overlap between the linking page's content and the linked page's topic.
• Editorial context: A link placed within original content by a human editor, not in a sidebar, footer, or sponsored block.
• Category-matched exchange: A link swap between two sites in the same industry with compatible audiences, facilitated by a platform that verifies relevance.

Key Facts from SeaText Authority Builder

FAQ

How many authority links do I need to see ranking movement?

There's no fixed number. Five relevant links from DR 50+ niche sites often move needles more than 50 irrelevant DR 70 links. Track keyword positions per referring domain to find your threshold.

Can I build authority links without content creation?

You need something worth linking to: a tool, dataset, original research, or definitive guide. Category-matched exchange networks reduce the content burden because partners link to your existing pages in context, but you still need linkable assets.

What's the risk of using a link exchange platform?

Risk depends on relevance enforcement. Platforms that match by category, audience, and editorial context (like Authority Builder) mimic natural linking patterns. Platforms that match by DR alone create footprints Google detects.

How do I know if a news site's vertical is worth pursuing?

Check if they've linked to similar companies in the last six months. Search site:domain.com/vertical "your competitor". If they cite external sources regularly, they're a viable target.

Should I disavow low-relevance links before building authority ones?

Only if you have a manual action or clear toxic pattern. Google ignores most low-quality links automatically. Focus energy on earning relevant links; disavow is a cleanup tool, not a growth strategy.

What's the difference between authority links and citation links?

Citation links (directories, profiles, mentions) establish existence and NAP consistency. Authority links pass topical ranking power. You need both, but they serve different SEO functions.

How does SeaText's Authority Builder ensure link quality?

It matches only websites in your category with compatible audiences, publishes every link as 100% dofollow on a SeaText-controlled subdomain in editorial context, and lets either party remove the link anytime. No outreach lists, paid link lists, or reciprocal requirements.

Understanding the Cost Structure

AI-based traffic redirection is not a single purchase. Your budget must cover three main areas: platform subscription, integration, and ongoing optimization. For a mid-size e-commerce site, the first-year spend usually lands between $5,000 and $25,000. That range is wide because traffic volume, platform choice, and the level of customization vary a lot.

Platform subscription fees are the most visible cost. Many vendors charge a monthly fee based on the number of sessions processed. A typical starting point is $59 per month, but mid-size sites with 50,000 to 500,000 monthly sessions often pay $200 to $1,000 per month. Some vendors offer a flat fee for unlimited sessions, while others charge per session – usually a fraction of a cent. The choice between these models affects your total cost as traffic grows.

Integration is usually a one-time expense. Most modern AI agents install via a JavaScript snippet that you paste into your site's header. This takes under a minute and rarely requires a developer. If your site uses a common CMS like WordPress, Shopify, or Magento, you may even get a plugin or dashboard toggle. The integration cost is often just your team's time – maybe 1-2 hours. However, if you need custom rules or complex routing logic, you might pay a developer $500 to $2,000 for extra configuration.

Ongoing optimization is the hidden cost. The AI needs monitoring to ensure it is routing visitors correctly and improving conversion rates. This includes reviewing conversion reports, adjusting the AI's behavior, and sometimes retraining models with new data. Many vendors include automated monitoring in their subscription, but you should still plan for at least 5-10 hours per month of marketing team time to review performance and tweak campaigns. That time is worth $500 to $2,500 per month, depending on your team's seniority.

Why Traffic Redirection Matters

Visitors arrive from Google Ads, Meta, email, partners, PR articles, and review sites. Each source carries a different intent. Someone clicking a specific product ad expects to land on that product page, not your homepage. If they land on the wrong page, they bounce. That wasted click costs you money.

AI-based redirection solves this by detecting the visitor's source in real time. It reads UTM parameters, referrer, device, and geography. Then it either rewrites the current page to match the visitor's intent or routes them to a more relevant page. For example, a visitor from a Google Ads campaign for running shoes might be redirected to the best-selling running shoe category, while a visitor from a newsletter about winter gear might see a page featuring waterproof boots.

This is not a one-size-fits-all fix. The AI learns from conversion data. It tests different page versions and routes to see which ones generate sales. Over time, it gets better at predicting what each visitor needs. The result is higher conversion rates and better return on your marketing spend.

Key Drivers of Implementation Costs

Traffic Volume is the biggest cost driver. Most platforms scale pricing by monthly sessions. A site with 50,000 sessions per month will pay less than one with 500,000. Some vendors charge per session (e.g., $0.001 per session), which means costs rise linearly. Others offer volume tiers. If you expect traffic to grow, choose a pricing model that rewards scale rather than one that punishes it.

Customization Requirements also matter. Standard platforms work for most e-commerce sites. But if you have unique URL structures, regional pricing, or complex product hierarchies, you may need custom rules. That adds integration time and sometimes developer hours. Before buying, ask the vendor if their out-of-the-box solution can handle your site's complexity.

Integration Complexity varies by CMS. For WordPress, you can often install a plugin or paste a snippet. Shopify has built-in app integration. Magento may require more manual work, but it is still a snippet install. The table below shows common platforms and typical integration effort.

• WordPress: Plugin or header snippet. No developer needed.
• Shopify: App store install or theme code snippet. Works with Liquid.
• Magento: Requires adding a script to the layout. Slightly more effort.
• Wix: Dashboard plugin or HTML iframe.
• BigCommerce: Script manager or theme edit.

Most vendors, including Seatext, provide step-by-step instructions for each platform. If you can paste a code, you can integrate. The only extra cost is if you need a developer to handle advanced routing rules.

The Hidden Cost of Inaction

Not implementing AI redirection has a measurable cost. Every visitor who sees the wrong page wastes the ad spend that brought them. With average cost-per-click (CPC) of $1-2 on Google and a typical bounce rate of 70-80% for mismatched landing pages, you could be losing thousands of dollars each month.

Example: A mid-size site gets 50,000 paid clicks per month at $1.50 each. If 30% bounce because they don't see what they searched for, that is 15,000 wasted clicks worth $22,500. Even a 30% reduction in that bounce rate saves $6,750 per month. A $500/month AI subscription pays for itself many times over.

Beyond direct lost clicks, there is the impact on your ad quality score. High bounce rates lower your Quality Score on Google Ads, increasing your cost per click. Fixing the redirection problem can improve your Quality Score, reduce CPC, and improve your ad rank.

Decision Framework: How to Scope Your Project

Before you buy, follow this five-step process. It prevents overspending and ensures you get the right solution.

1. Audit your traffic sources. Use your analytics to identify which channels have the highest bounce rates and lowest conversion rates. Focus on paid campaigns first because they cost money per click.
2. Define your goals. Are you trying to increase sales, reduce bot traffic, or improve international conversion? Different AI agents handle different problems. A bot refund agent is not the same as a visitor source redirect agent.
3. Estimate your traffic volume. Count monthly sessions from paid and organic sources. Your volume determines which pricing tier you need.
4. Start with a pilot. Do not roll out site-wide. Pick one campaign or one product category. Run it for two to four weeks and measure the conversion lift. Most vendors, including Seatext, offer pilot trials. Use that time to validate the ROI.
5. Scale based on results. If the pilot shows a positive lift, expand to more campaigns. If not, re-evaluate the vendor or configuration.

How to Evaluate AI Traffic Redirection Vendors

Not all vendors are the same. Use these criteria to compare options.

Pricing model. Ask if they charge per session or a flat fee. Per-session pricing is transparent but can skyrocket during peak seasons. Flat fee is predictable but may be more expensive for low-traffic periods. Know your monthly session numbers and calculate both scenarios.

Integration difficulty. Check if they support your CMS. Most support Shopify, WordPress, and Magento. Some also cover Wix, BigCommerce, and custom sites. A snippet install is easiest.

Customization level. Can you set rules for specific campaigns? Do they allow you to control what the AI changes? Look for dashboards that let you set boundaries on copy and routing.

Reporting and transparency. The vendor should show conversion reports by page, keyword, and variant. This lets you verify performance and prove ROI.

Support and onboarding. Do they offer a pilot program? Is there a clear onboarding guide? Good vendors provide documentation and responsive support.

Recommendation based on site size: For small sites (under 20,000 sessions/month), a low-cost flat fee under $100/month is enough. For mid-size sites (50k-500k sessions), choose a vendor with volume discounts and robust customization. For large enterprises, prioritize enterprise controls and dedicated support. If you have a high mix of international traffic, look for translation and localization features.

Limitations and Considerations

AI redirection is powerful but not perfect. It needs a baseline of data to learn. If your site has fewer than a few thousand visits per month, the AI may not have enough examples to make accurate decisions. In that case, consider a rule-based approach instead.

Privacy is another concern. The AI reads visitor data like UTMs and location. That is usually fine under GDPR if you handle it properly. Make sure your vendor is compliant and you are transparent in your privacy policy.

Site speed and SEO are also factors. The JavaScript snippet adds a small load time. Most snippets are optimized, but test your page speed after installation. Also, ensure the redirects use 301s or client-side updates that do not harm crawlability. You do not want search engines to index the wrong pages.

Frequently Asked Questions

How long does it take to see results?

Most teams see improvements within a few weeks. The AI learns in real time. It starts with rules based on your campaign settings and then adjusts as it gathers conversion data. Expect the biggest gains in the first month.

Do I need a developer to install this?

No. You can usually add the snippet in under a minute. If you use a CMS like WordPress, Shopify, or Magento, the vendor may offer plugins or dashboard toggles. A developer is only needed if you have custom routing rules.

Can I control what the AI does?

Yes. Enterprise platforms give you boundaries. You can specify which pages to route visitors to, which headlines to test, and which CTAs to change. You can also pause or roll back changes if performance drops.

What happens if my traffic volume changes?

If your pricing is per session, your bill will adjust automatically. If you have a flat fee, you may outgrow it and need a higher tier. Monitor your costs monthly. Many vendors allow you to change plans mid-cycle.

Can I start with a pilot program?

Yes. Most reputable vendors, including Seatext, offer a free trial or pilot. Start with one campaign. Measure conversion rate before and after. Use that data to justify a full rollout.

What if I use Shopify, WordPress, or Magento?

All three are supported. Shopify has an app integration. WordPress can use a plugin or header snippet. Magento requires adding a script to the layout. The vendor documentation covers each platform.

Is it safe for SEO?

Properly implemented redirects do not hurt SEO. Use client-side routing that preserves crawlability. Avoid cloaking. Most AI tools keep your URL structure intact, so search engines see the same content.

What You Need Before Testing

Before you start testing, make sure you have these three things ready:

• A Square Developer account – Sign up at developer.squareup.com if you haven't already. This gives you access to the sandbox environment.
• Your ecommerce platform's test mode – Platforms like Shopify, WooCommerce, BigCommerce, and Wix each have a built-in test or sandbox mode. Enable it so no real charges are processed.
• Square test card numbers – Square provides specific card numbers that simulate successful payments, declined cards, and other scenarios. You can find these in the Square developer documentation.

Step 1: Enable Sandbox Mode in Square

Log in to your Square Developer Dashboard. Navigate to the sandbox settings and toggle sandbox mode on. This creates a separate environment that mimics the live Square system but uses fake data. No real transactions, customers, or inventory are affected.

Once sandbox mode is active, you will see a sandbox location in your dashboard. Use this location for all test transactions.

Step 2: Configure Your Ecommerce Platform for Testing

Each platform has a different way to enable test mode:

• Shopify – Go to Settings > Payments > Square. Enable test mode and enter your sandbox API credentials.
• WooCommerce – Install the Square plugin. In plugin settings, check the “Enable Sandbox Mode” box and enter your sandbox application ID and access token.
• BigCommerce – In the Square payment gateway settings, toggle “Test Mode” on and use sandbox API keys.
• Wix – In the Square integration settings, enable the sandbox option and paste your sandbox credentials.

If your platform is not listed, look for a “test mode” or “sandbox” toggle in the Square payment settings. The process is similar across most platforms.

Step 3: Place Test Orders Using Square Test Cards

Now you can simulate real purchases. Use the following test card numbers to trigger different outcomes:

• Successful payment – Use card number 4111 1111 1111 1111 with any future expiry date and any CVV.
• Declined payment – Use card number 4000 0000 0000 0002 to simulate a card decline.
• Insufficient funds – Use card number 4000 0000 0000 0003.
• Invalid card – Use card number 4000 0000 0000 0004.

Go to your ecommerce store's checkout page as a customer would. Enter one of these test card numbers along with any valid name, address, and future expiry date. Complete the order.

Repeat this process for each test card to verify how your store handles different payment outcomes.

Step 4: Verify Data Sync Between Square and Your Platform

After placing a test order, check that the information appears correctly in both systems:

• In your ecommerce platform – Look at the order details. The order should show as “paid” or “completed” for successful payments, and as “failed” or “declined” for declined ones.
• In the Square Dashboard – Go to the sandbox location and view the transactions. You should see the same test orders with matching amounts, card types, and statuses.

If the order appears in your platform but not in Square, or vice versa, there is a sync issue. Check your API credentials and webhook settings.

Step 5: Test Webhooks and Notifications

Square uses webhooks to send real-time updates about payments, refunds, and disputes to your platform. To test webhooks:

1. In your Square Developer Dashboard, go to Webhooks and add a test endpoint URL (you can use a service like webhook.site to capture the payload).
2. Place another test order. Square will send a webhook event to your endpoint.
3. Check that the webhook payload contains the correct order ID, payment status, and amount.

If your platform relies on webhooks to update order status, this step is critical. A missing or malformed webhook can cause orders to appear as unpaid even after a successful charge.

Step 6: Test Refunds and Partial Refunds

Refunds are a common part of ecommerce. Test the full refund flow:

1. In your ecommerce platform, initiate a refund for a test order that was paid with a successful test card.
2. Check that the refund appears in the Square Dashboard under the same transaction.
3. Verify that the order status in your platform updates to “refunded” or “partially refunded.”

Also test a partial refund to ensure your platform handles it correctly.

Key Facts About Testing Square Integration

Limitations of Testing in Sandbox

Sandbox testing is powerful, but it has limits:

• No real payment processing – You cannot test actual bank transfers, card-present transactions, or hardware integrations.
• No customer data – Sandbox does not create real customer profiles. You will not see email receipts or customer cards saved for future use.
• No chargebacks or disputes – You cannot simulate a customer disputing a charge. That flow can only be tested in production.
• Limited test card scenarios – Square provides only a handful of test cards. Complex scenarios like 3D Secure authentication may not be fully reproducible.

For these reasons, after passing sandbox tests, run a small set of live transactions with your own card to confirm everything works in production. Then immediately refund those transactions.

Frequently Asked Questions

Do I need a separate Square account for testing?

No. Your existing Square account can access the sandbox environment through the Developer Dashboard. You do not need a second account.

Can I test Square integration without a developer account?

No. The sandbox environment is only available through the Square Developer platform. You must create a developer account, which is free.

How long does it take to set up the sandbox?

About 10 to 15 minutes. Creating a developer account and enabling sandbox mode takes only a few clicks. Configuring your ecommerce platform with sandbox credentials takes a bit longer.

Will testing affect my live store data?

No. Sandbox data is completely isolated. Orders placed in sandbox mode do not appear in your live Square Dashboard or affect your inventory, customers, or reports.

What if my platform does not have a test mode?

Some custom-built or less common platforms may lack a built-in test mode. In that case, you can still test by using Square's API directly with sandbox credentials. You will need to manually verify data sync by checking API logs.

How do I know if my webhooks are working?

Use a webhook testing tool like webhook.site or requestbin.com. Configure Square to send webhooks to that URL, then place a test order. If you see the payload arrive, your webhooks are working.

What should I do if a test fails?

First, check your API credentials. Make sure you are using sandbox credentials, not live ones. Then check your platform's error logs. Square also provides detailed API error messages in the Developer Dashboard. Common issues include incorrect endpoint URLs, missing permissions, or mismatched location IDs.

Symptoms of Integration Problems

You might see one of these signs:

• The SeaText AI script doesn't load on your Square site.
• Your website name doesn't appear in your SeaText account after installation.
• AI-generated content doesn't update or appears incorrectly.
• You get an error message when trying to activate the AI.

Diagnostic Sequence: Step by Step

Follow this order to find the cause. Do not skip steps.

Step 1: Verify Your Square Plan

Square offers different plans. Some lower-tier plans may not support third-party app integrations. Check your Square dashboard under Account & Settings > Business > Plan to confirm your plan allows external apps. If not, you may need to upgrade.

Step 2: Check Your SeaText Account and Script

Log into your SeaText AI account. Go to the integration page and copy the JavaScript code again. Make sure you have the correct code for your domain. Each SeaText account is linked to a single primary URL. If you use multiple domains, you need separate accounts.

Step 3: Install the Script Correctly on Square

In your Square Online site editor, go to Settings > Advanced > Code Injection. Paste the SeaText JavaScript code into the Header section. Save and publish your site. Visit your live site (not a preview) and stay on the page for at least 40 seconds. This activates the AI and links it to your account.

Step 4: Wait and Refresh

After installing, wait at least five minutes. Refresh your SeaText account page. Your website name should appear next to the SeaText logo at the top. If it doesn't show after 10 minutes, contact SeaText support.

Step 5: Clear Browser Cache

If the script is installed but nothing happens, clear your browser cache and cookies. Then revisit your Square site and the SeaText dashboard. Stale cache can prevent the AI from loading.

Technical Architecture of the SeaText JavaScript Injection

SeaText AI uses a JavaScript snippet injected into your Square site's header. This script runs when a visitor loads any page. It interacts with Square's DOM (Document Object Model) to read page content and visitor behavior.

The script creates a lightweight connection to SeaText's servers. It sends anonymized data about page elements, scroll depth, and dwell time. This data is used to generate AI content variants. The script does not modify your Square site's core files. It only adds a small, non-blocking script tag.

Square's Code Injection feature places the script in the section of every page. This ensures the script loads early. The script then waits for the DOM to be ready before activating. This prevents conflicts with Square's own JavaScript.

The script uses event listeners to track user interactions. It monitors clicks, scrolls, and time on page. It does not interfere with Square's checkout or payment processes. The AI remains inert until a visitor spends at least 40 seconds on the page. This ensures the AI only activates for genuine human visitors.

Security is built in. The script is served over HTTPS. It does not execute any code that could alter your Square store's functionality. It only reads content and sends data to SeaText's API. No content changes happen without your approval.

Advanced Debugging Using Browser Developer Tools

If the script doesn't load, use your browser's developer tools. Open the Network tab. Reload your Square site. Look for a request to seatext.com or a similar domain. If you don't see it, the script is not installed correctly.

Check the Console tab for errors. Common errors include "Failed to load resource" or "Script error." These indicate the script URL is wrong or blocked. Also look for "Content Security Policy" errors. Square may block external scripts if your plan restricts third-party content.

Use the Elements tab to verify the script tag is present. Search for "seatext" in the HTML. If the tag is missing, re-paste the code in Square's Code Injection. If the tag is present but the script doesn't run, check for JavaScript syntax errors in the Console.

Test with a private browsing window. This avoids cached scripts. If the script loads in private mode but not normal mode, clear your cache. Also disable browser extensions that block scripts, like ad blockers.

For advanced debugging, use the Sources tab. Set breakpoints in the SeaText script. Step through the code to see where it fails. This requires some JavaScript knowledge. Contact SeaText support if you need help.

Common Configuration Conflicts

Other third-party scripts can interfere with SeaText AI. For example, analytics scripts like Google Analytics or Facebook Pixel may conflict. They can cause race conditions where SeaText fails to load. To fix this, ensure SeaText's script is placed before other scripts in the header.

Square themes can also cause issues. Custom themes may modify the DOM in ways that break SeaText's event listeners. If you use a custom theme, test SeaText on a staging site first. Contact the theme developer for compatibility.

Content Security Policies (CSP) can block SeaText's script. Square's default CSP may not allow connections to seatext.com. Check your Square site's CSP headers. If they block external scripts, you need to add seatext.com to the allowed list. Contact Square support for help.

Ad blockers and privacy extensions can prevent the script from loading. These tools often block third-party scripts by default. Ask users to whitelist your site. Or use SeaText's server-side integration if available.

Multiple SeaText accounts on the same domain cause conflicts. Each account is linked to one primary URL. If you install scripts from two accounts, only one will work. Remove duplicate scripts and keep only the correct one.

Best Practices for Maintaining the Integration

Regularly check your SeaText dashboard. Ensure your website name is still displayed. If it disappears, the script may have been removed or blocked. Re-install the script if needed.

Keep your Square site updated. Square releases updates that may change how Code Injection works. After each update, verify the script is still present and working. Test on a staging site before updating your live site.

Monitor your browser console for errors. Set up a routine check every month. Look for any new errors related to SeaText. Early detection prevents long downtime.

Document your integration steps. Note the exact script you used and where you placed it. This helps if you need to re-install or troubleshoot later. Share this documentation with your team.

Use version control for your Square site if possible. Some Square plans allow code backups. If not, keep a copy of your script and settings in a secure location. This makes recovery faster.

Test after any changes to your Square site. Adding new apps, changing themes, or updating plugins can break the integration. Always test SeaText after such changes.

Limitations and When This Advice Doesn't Apply

This guide covers common integration issues. It does not cover:

• Problems with Square's own API or server outages. These are outside SeaText's control.
• Issues caused by custom code conflicts on your Square site. Custom JavaScript may interfere with SeaText's script.
• Advanced customization of SeaText AI beyond basic setup. This guide is for standard integration only.
• Problems with third-party plugins or themes that modify your site's code. These may require separate troubleshooting.

Some Square configurations are incompatible. For example, Square's free plan may not support third-party scripts. Also, Square's POS-only plans (without an online store) cannot use SeaText. The script requires a web page to run.

If you use a custom domain with Square, ensure the domain matches your SeaText account. Mismatched domains prevent activation. Also, dynamic development domains like localhost are restricted. Use a real domain for testing.

SeaText AI may not work with Square's older site builder (Square Online legacy). The newer Square Online editor is required. Check your Square site version. If you use the legacy builder, consider upgrading.

If your Square site uses a CDN or caching service, the script may not load correctly. Clear the cache after installing the script. Some CDNs block third-party scripts by default. Configure your CDN to allow seatext.com.

For complex issues, contact SeaText support. They can provide advanced debugging. This guide is a starting point, not a complete solution.

Frequently Asked Questions

Why doesn't my website name appear in SeaText after installation?

This usually means the script isn't installed correctly or the page hasn't been visited long enough. Re-check the code placement and visit your live site for at least 40 seconds. Wait up to 10 minutes for the dashboard to update.

Can I use SeaText AI on multiple Square stores?

Yes, but you need a separate SeaText account for each store. Each account is linked to one primary URL.

What if I see an error when trying to activate the AI?

First, check your Square plan supports third-party apps. Then verify the script is in the correct location. If the error persists, contact SeaText support.

Does SeaText AI work with Square's free plan?

Square's free plan may not support third-party app integrations. Check your Square account settings to confirm. If not, you may need to upgrade.

How long does it take for SeaText AI to start working?

After installing the script, visit your site for at least 40 seconds. Your website name should appear in the SeaText dashboard within 10 minutes. If not, contact support.

Can I edit the AI-generated content?

Yes. Log into your SeaText account, go to Variants Edit, select the URL and language, and make changes manually or with AI prompts.

What should I do if the script is installed but nothing happens?

Clear your browser cache and cookies. Then revisit your Square site and the SeaText dashboard. If it still doesn't work, re-copy the script and reinstall it.

How do I check if the script is loading?

Open your browser's developer tools (F12). Go to the Network tab. Reload your Square site. Look for a request to seatext.com. If you don't see it, the script is not installed.

Can other scripts block SeaText?

Yes. Analytics scripts, ad trackers, and custom JavaScript can cause conflicts. Place SeaText's script first in the header. Test with other scripts disabled to isolate the issue.

What if I use a custom Square theme?

Custom themes may modify the DOM. This can break SeaText's event listeners. Test on a staging site first. Contact the theme developer for compatibility.

Yes, you can copy the SeaText AI JavaScript code from the integration page. The code is provided specifically so you can copy it and paste it into your website. After you log in to your SeaText account, the integration page shows a code block under a “Step by step integration” section, with a simple instruction: copy it.

For most users, the process ends with pasting the code into Shopify’s theme.liquid file. You don’t need to write custom code. You just need to copy the snippet, find the right file, paste it, and save. Then you can activate the SeaText agents you want to run.

What is the SeaText AI JavaScript code?

The SeaText AI JavaScript code is a small script snippet that connects your website to SeaText’s AI agents. It does not add visible content by itself. Instead, it lets SeaText run tools like website translation, conversion rate optimization, personalization, and more on your site.

The code is unique to your SeaText account. When you look at the integration page, you’ll find the snippet inside the “Step by step integration” area. That area includes the text “Copy the Javascript code from SEATEXT AI which appear in this section below.” So the page is designed for you to copy it.

Do you need a SeaText AI account first?

Yes. Before you can install the script, you need a SEATEXT AI account. If you don’t have an account yet, the integration page gives you a link to create one.

Your account is linked to a single primary URL. That matters when you think about development sites, production sites, or multiple brands. You cannot use one account to install the code on several unrelated domains.

How to copy the code from the integration page

Copying the code is straightforward. Follow these steps:

1. Log in to your SeaText AI account.
2. Go to your integration page.
3. Find the section labeled “Step by step integration”.
4. Locate the JavaScript code block. Use the copy button if one is available, or select the code and press Ctrl+C (Cmd+C on a Mac).
5. Keep the copied snippet somewhere safe, like a notes document, until you paste it into your theme.

Because the code is tied to your account, don’t copy it from someone else’s site or from a forum. Use the code that appears in your own SeaText dashboard.

Where to paste the code in Shopify

The most common destination is your Shopify theme’s theme.liquid file. The SeaText integration page gives exact steps:

1. Log in to your Shopify admin.
2. Go to Online Store > Themes.
3. Click Actions > Edit Code for your active theme.
4. Open the Layout folder.
5. Select theme.liquid.
6. Paste the SeaText code snippet where it needs to go.
7. Click Save to preserve your changes.

After saving, preview your site to confirm it still loads normally. If something looks wrong, you can undo the change by removing the pasted code and saving again.

Optional: Add the product description tag

The integration page also describes a separate step for product descriptions. This is useful if you want SeaText to optimize ecommerce product copy. You need to find the file that renders the product description, usually product.liquid or product-template.liquid, and wrap the product description output with the tag. After saving, preview a product page and check the HTML source to confirm the data- attribute is present.

This step is optional for the main script, but it unlocks product-level controls. If you’re not sure which file to edit, search for “product description” in your theme’s code editor.

What the code does after you install it

The SeaText code does not change your site immediately. The integration page says the installation process is secure, and the AI remains inert until activated. That means simply pasting the code into theme.liquid won’t start rewriting headlines or translating pages.

After installation, log in to SeaText and activate the agents you need. SeaText offers many agents, including website translation in 125 languages, AI CRO reading analysis, conversion relay for Meta and Google CAPI, and AI SEO content. Each agent may have its own settings. Start with one agent, save your settings, and test the result on a live page.

Key facts at a glance

Limitations and restrictions to know

There are a few important limits that affect how you copy and use the SeaText code.

• One account per domain. If you run a development domain and a production domain, you need separate SeaText accounts. You cannot use the same code on both.
• Localhost is restricted. The integration page explicitly says development URLs like localhost are restricted for security reasons. Use a valid, real domain.
• Dynamic development domains may not work. SeaText might be unable to reliably associate traffic with your account on dynamic URLs, so features may not function correctly.
• Multiple websites need multiple accounts. To use SeaText on several websites, create one account for each website.
• The code is account-specific. Copying it from another account won’t work. Use the code shown in your own integration page.

The main takeaway is simple: the code is copyable, but not universal. It belongs to one account and one primary URL, and it stays inactive until you turn on an agent.

Frequently asked questions

Can I use the same SeaText code on two websites?

No. SeaText links each account to a single primary URL. To use SeaText on several websites, you need to create one account for each website.

Is it safe to paste the SeaText code into my Shopify theme?

The integration page says the installation process is secure and the AI remains inert until activated. As with any third-party script, test on a theme you can roll back if you have concerns.

What if I paste the code and nothing changes on my site?

That’s expected. The script stays inactive until you activate SeaText agents. Log in to SeaText, choose the agents you want, and enable them.

Can I use a localhost or development URL?

Localhost URLs are restricted for security reasons. Use a valid, real domain. Dynamic development domains may not function properly because SeaText may not be able to associate traffic with your account.

Do I need coding experience to copy and paste the code?

No. The core step is copy, paste, and save. You do need to find the correct file in Shopify, but the integration page gives you the exact path: Layout > theme.liquid.

You add SEATEXT to BigCommerce by inserting the provided JavaScript snippet into your store's Script Manager. The whole install takes less than one minute, and you don't need to touch your theme HTML. After you paste the code, you activate the agents you want from your SEATEXT dashboard and the AI starts rewriting pages to match incoming keyword intent, translating content, or filtering bots.

Prerequisites Before You Add SEATEXT to BigCommerce

Before you jump into the code install, confirm the following:

• A BigCommerce store plan that supports custom scripts. Most paid plans include this feature.
• SEATEXT account with an active snippet or installation link. You can create one free and start exclusively.
• Admin access to your BigCommerce control panel. You do not need a developer.
• A stable network connection. The whole process is a copy-and-paste routine.

BigCommerce lists SEATEXT as a supported platform on the SEATEXT installation page, so the platform is directly compatible. You don't need a third-party connector.

Where to Place the SEATEXT Code in BigCommerce

Unlike classic "in the <head> or footer" style guides, BigCommerce today uses a script injection system. You don't edit the HTML template directly unless you want to. The cleanest and safest route is using the built-in Script Manager:

1. In your BigCommerce control panel, go to Storefront → Script Manager.
2. Click + Create a Script.
3. Choose where to load the script: in the Head, Body, or Footer. SEATEXT recommends loading it on "Head" or "Footer".
4. Paste the SEATEXT snippet into the "Script Code" field.
5. Under "Pages", choose "All pages", or if you only want specific pages first, select "Storefront – Tailored" and filter later.
6. Click Save.

This method keeps your theme clean and makes future updates easier. The Script Manager is the official place to add all third-party scripts.

How to Get the SEATEXT Snippet

SEATEXT gives you a unique snippet per site. Inside your SEATEXT dashboard, look for the installation screen. It lists all major platforms – WordPress, Shopify, Wix, BigCommerce, and many others. Click the BigCommerce icon.

You'll be shown a small piece of JavaScript. Press the copy button near the code block. Use the exact copied string – don't modify any character or add extra quotes.

If you have a single-page app or a custom site, the same process works, but the platform selector may change. For BigCommerce you're fine with the standard script injection.

Step-by-Step: How to Inject the SEATEXT Code into BigCommerce

Step 1 – Open SEATEXT → BigCommerce instructions

Go to SEATEXT's "How to install" page. Click on BigCommerce out of the platform list. That page will display the exact snippet and confirm the environment.

Step 2 – Copy the SEATEXT snippet

On the installation page, click the copy button (it's also on the home page under "Add Seatext to your site in under 1 minute"). You'll get something like <script src="https://seatext.com/..."></script>.

Do not change the code. It's razor-thin – if you need to modify it later, contact support.

Step 3 – Open BigCommerce Dashboard

Log into your BigCommerce admin, click Storefront in the left sidebar, then choose Script Manager. This is the official place to add all third-party scripts.

Step 4 – Match the platform

If the manager asks for "Location", choose Head unless SEATEXT docs recommend Footer. Both work for SEATEXT. For faster loading you can also use Footer – all scripts in footer still execute.

Step 5 – Save & turn on

Click "Save & Close". BigCommerce will now globally load your SEATEXT code on all pages (if you selected "All pages").

Step 6 – Activate agents in SEATEXT account

Go back to SEATEXT dashboard and Activate the agents you want: Google Ads Landing Page Agent, Bot Refund Agent, Translation Agent, or others. Activation usually takes one click per agent.

How to Verify the Code Is Working

You don't need to hunt in your code block – you can verify visually in your BigCommerce store:

• Open your store in an incognito or privacy window.
• Press Ctrl+Shift+S (Windows) or Cmd+Opt+S (Mac) to view page source. Search for the string "seatext" – you should see your script tag. If you don't, the script wasn't loaded.
• Also open the SEATEXT dashboard – you should see a live "active on BigCommerce" marker, and initial page views.
• Go to the SEATEXT verification page or use Google's PageSpeed Insights to confirm there are no errors associated from the snippet.

If you see an error, go to Storefront → Script Manager and check whether the script code was pasted as code (not filtered into text) and that there's no extra spacing at the beginning.

Key Facts and Expectations

Common Mistakes and How to Avoid Them

SEATEXT isn't hard to install, but a few pitfalls frustrate users:

• Pasting the SEATEXT code into the wrong field – use Script Manager, not Theme Editor or Storefront > Script Manager.
• Forgetting to select "All Pages" – if you choose one page only, it won't affect the whole site.
• Asking the BigCommerce "WebDAV" to edit your theme directly – you overwrite your theme and make troubleshooting difficult.
• Copying the snippet with reformatted line breaks – only use the "copy" button in SEATEXT.
• Expecting results instantly – SEATEXT uses visitor intent and A/B tests variants, so give it 24 hours with sufficient traffic to act.

Limitations and When It Might Not Be Right

SEATEXT is "code-first" – everybody works with the same script, so most BigCommerce stores are fine. However, be aware:

• If you are on a very restrictive plan without custom scripts (like a "Simple" plan), you'll need to upgrade BigCommerce to run the snippet.
• SEATEXT is not a pure translation plugin – it also AI rewrites pages. If you want translation only, you still need to control activation well.
• If you already use a heavy amount of custom JavaScript, there's a low risk of clashing – although the SEATEXT script is lightweight and uses global functions, test it before pushing to production.
• The code runs on storefront only – logged-in admin area is not affected.

FAQ

Does BigCommerce allow third-party scripts?

Yes, BigCommerce has a built-in Script Manager that lets you add JavaScript to pages without modifying theme files. SEATEXT uses this same injection path.

Can I add SEATEXT code to my BigCommerce theme instead of Script Manager?

You can also paste the code into your theme head via WebDAV, but we don't recommend it. Script Manager is officially supported and easier to maintain.

I have no coding skills – can I still install SEATEXT on BigCommerce?

Yes. The control panel is just point-and-click. No developer needed.

Should I activate all SEATEXT agents at once?

Start with one agent that tackles your main problem (like product descriptions or Google Ads). Add the others after you confirm the general install is working.

Is the code free?

SEATEXT provides a free pilot. They have a "start free" option, and it doesn't start billing until it sees at least a 5% conversion lift, so initial setup costs nothing.

How long does it take for the code to start?

BigCommerce loads the script on the next page load after you save. SEATEXT dashboard will show the site as connected within a few minutes.

If you run several Tilda sites and want one SeaText dashboard that shows conversion performance for all of them, the short answer is: SeaText does not currently offer a unified cross-account dashboard. Each domain needs its own SeaText account, and each account has its own reporting view. You can still get a consolidated picture by exporting data from each account or by piping the data into a business-intelligence tool, but there is no built-in "organization-level" roll-up.

Why the limitation exists

SeaText ties each account to a single primary URL for security and attribution reasons. The integration guide states: "If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain. Each SEATEXT AI account is linked to a single primary URL." This design keeps bot-detection evidence, refund reports, and keyword-level conversion data isolated per property.

Prerequisites before you start

• A SeaText account for every Tilda domain you want to track.
• Admin access to each Tilda site's Site Settings so you can paste the SeaText snippet into the HEAD tag.
• At least 40 seconds of dwell time on each page after installation to activate the AI, plus a five-minute wait for the domain to appear in the SeaText header.
• A spreadsheet, BI tool (Looker Studio, Power BI, Metabase), or simple CSV workflow if you want a combined view.

Step-by-step: set up tracking on each Tilda domain

1. Create a SeaText account for the domain. Go to SeaText, sign up, and enter the exact production URL (e.g., https://brand.com). Do not use localhost or dynamic preview URLs.
2. Copy the JavaScript snippet. In the SeaText dashboard, copy the integration code shown under "SEATEXTCODEINTEGRATION."
3. Paste into Tilda Site Settings. In Tilda, open Site Settings → More → HTML code for the head section → Edit code. Paste the snippet into the field labeled "Edit code inside HEAD tag," then save and publish.
4. Verify activation. Visit the live site, stay on the page for at least 40 seconds, then refresh. Within five minutes the domain name should appear next to the SeaText logo in your account header.
5. Enable the agents you need. For conversion tracking, activate the Conversion Agent, Google Ads Agent, and Bot Refund Agent from the dashboard. Each agent adds its own reporting tab.
6. Repeat for every domain. Each domain gets its own login and its own dashboard.

Do not reuse a snippet from one domain on another. The snippet’s account identifier is tied to the original primary URL. A second site using that snippet will not attribute correctly.

How to build a combined view today

Since SeaText does not merge accounts, you have three practical options. The right choice depends on your team size, reporting cadence, and technical resources.

Option 1: Manual CSV export and merge

This is the lowest-cost option. It works with any plan and any number of domains.

1. Log into the SeaText account for the first Tilda domain.
2. Open the Conversion Agent report. It shows results by page, keyword, and variant.
3. Set the report period to match your executive reporting window (e.g., last 7 days or this month).
4. Copy the table data, or use a CSV download if your plan provides one. If neither is available, copy the numbers into a spreadsheet and save it as CSV.
5. Name the file clearly, for example seatext-domain1-2025-01.csv.
6. Repeat for each domain account.
7. Open a master spreadsheet. Import each CSV as a new tab.
8. Add a column called "Domain" on every tab so you can tell the sources apart.
9. Use a pivot table to sum conversions and sessions by domain and date.
10. Refresh the data on the same day each week so the executive report is consistent.

This workflow takes about 15 minutes per week for four domains. It is manual, but it gives you full control over the final numbers.

Option 2: BI connector or API pulls

If you have engineering resources, you can pull SeaText data into a BI tool. Use the SeaText API if available on your plan. Schedule a daily job to fetch conversion data and write it to a warehouse. Then build one dashboard with domain as a dimension. This gives you near-real-time numbers, but it requires setup and maintenance. If the API is not available, ask sales about Enterprise options.

Option 3: UTM discipline plus GA4

Keep UTM parameters consistent across all Tilda sites. Let Google Analytics 4 be the single source of truth for sessions and conversions. SeaText continues to handle on-page optimization, keyword-level reporting, and bot refund evidence per domain. This approach is good for teams that already live in GA4. The trade-off is that SeaText’s unique refund data stays outside the GA4 dashboard.

Key facts at a glance

Common mistake: trying to share one snippet across sites

Copying the same JavaScript snippet into multiple Tilda sites will not work. The snippet contains an account identifier tied to the original domain. Traffic from the second site will either fail to attribute or pollute the first site's bot-detection evidence. Always generate a fresh snippet from each domain's own SeaText account.

When to contact SeaText sales

If you manage dozens of Tilda domains, the manual approach does not scale well. You may need a custom agreement.

• You have more than 10 domains and need a weekly export.
• You want a single invoice or consolidated support.
• You need help mapping report fields to your BI schema.
• You are investigating whether an organization-level view is on the roadmap.

Contact SeaText sales through the website. Ask specifically about multi-domain reporting, SLAs, and any Enterprise plan features. Do not assume an organization-level dashboard exists until sales confirms it.

Limitations and when this advice does not apply

• If SeaText releases an organization-level dashboard in the future, the manual consolidation steps become optional. Check the changelog or account settings for a "Teams" or "Organizations" tab.
• Enterprise contracts may include custom reporting; contact sales if you manage dozens of domains.
• The steps above assume you control each Tilda site's Site Settings. If you only have page-level editor access, you must use the per-page block method (T123 → Other → HTML block) instead of the global HEAD tag.

Verification step

After setting up the third domain, open each SeaText dashboard side by side. Confirm that the Conversion Agent shows distinct keyword-level data for each domain and that the Bot Refund Agent lists separate refund-ready reports. If any dashboard shows "No data yet" after 24 hours of traffic, re-check the snippet placement and the 40-second activation visit.

FAQ

Can I use one SeaText login for multiple domains?

No. The source pack explicitly says you must create separate accounts for each domain. Each account has its own login credentials.

Does SeaText have an API for pulling conversion data?

The provided sources do not mention a public API. If you need programmatic access, ask SeaText support about enterprise API availability.

What if I have a staging domain and a production domain?

Treat them as two separate domains. Create two accounts, install two snippets. Staging domains that are not publicly resolvable (e.g., staging.brand.tilda.ws) may not activate reliably; use a real subdomain with DNS.

Can I compare conversion rates across domains inside SeaText?

Not natively. Export the "Conversion reporting by page, keyword, and variant" from each account and compare in a spreadsheet or BI tool.

Will the Bot Refund Agent mix evidence from different domains?

No. Evidence stays inside the account that generated it. This keeps refund claims clean per ad account.

Is there a discount for multiple domains?

The source pack does not publish volume pricing. Contact SeaText sales for multi-site agreements.

What happens if I paste the snippet into the wrong Tilda site?

Data will attribute to the wrong domain, bot detection will be polluted, and refund reports will be invalid. Remove the snippet immediately and install the correct one.

How often should I refresh my combined report?

Weekly is enough for most executive dashboards. Daily refresh makes sense only if you run many paid campaigns and need fast decisions.

Can I use SeaText on Tilda subdomains like shop.brand.com?

Each SeaText account is linked to a single primary URL. If you want to track a subdomain separately, treat it as a separate domain. Check with the vendor for exact subdomain rules.

Understanding the Square-SeaText Integration

Connecting your Square account to SeaText is a strategic move to streamline your business operations. This integration allows you to sync transaction data, customer information, and product lists directly into your SeaText dashboard. Instead of manually exporting CSV files, the system handles data flow automatically. This ensures your marketing analytics are always up to date.

The primary benefit of this connection is the elimination of data silos. When a sale occurs in Square, the data is reflected in SeaText instantly. This is particularly useful for businesses running marketing campaigns that need to see real ROI. You can track which ads led to actual Square purchases without manual entry errors.

Many users worry that they need a new account to use integrations. This is incorrect. The platform is designed to work with your existing profile. By linking your current account, you maintain all your history, settings, and data. The process is secure and uses industry-standard protocols.

What You Need Before You Start

Before you begin the connection process, ensure you have the following ready to avoid interruptions. Having these prepared prevents errors during the authorization phase.

• An active SeaText account: You must have a valid login. If you do not have one, create it at seatext.com.
• Square account credentials: You need the email address and password for your Square merchant account.
• Admin access: You must have administrative privileges on both SeaText and Square to grant data permissions.
• A modern web browser: Use Chrome, Firefox, or Edge to ensure the redirect works correctly.

Remember, you do not need a separate SeaText account for Square. The integration is built to enhance your existing account capabilities.

Step-by-Step Guide to Connecting Square

Step 1: Log In to Your SeaText Account

Start by navigating to seatext.com. Enter your current username and password. If you are already logged in, you will land directly on your own. If your session has expired, log in fresh.

Step 2: Open the Integrations Section

Once on the dashboard, look at the main navigation menu. Search for 'Integrations' or 'Connected Apps.' This is typically located within the 'Settings' or 'Account' dropdown tabs. Clicking this will open a gallery of all supported third-party services.

Step 3: Find Square in the Integration List

Browse the list of available apps. You might find Square categorized under 'Payment Processors' or 'POS Systems.' Once you locate the Square icon, click the 'Connect' or 'Add' button next to it.

Step 4: Authorize the Connection via OAuth

SeaText will now redirect you to a secure Square login page. Enter your Square credentials here. Square will ask for your permission to allow SeaText to access your data. This uses the OAuth flow. This means SeaText never sees or stores your Square password. It only receives a secure digital token to fetch the necessary data.

Step 5: Confirm the Connection

After you click 'Allow,' Square will automatically redirect you back to the SeaText platform. Look for a success message at the top of the screen. This confirms the link is active. Your existing account is now officially synced.

Step 6: Test the Integration

To ensure everything is working perfectly, perform a small test. Try to sync a single product or view your recent Square transactions within the SeaText interface. If the data appears, the connection is successful. If it remains empty, verify that you granted all requested permissions during the OAuth step.

Why This Integration Matters for Your Growth

The connection goes beyond simple data syncing. It is about data-driven decision making. When your Square data lives inside SeaText, you can perform advanced customer segmentation. You can identify your highest-value customers based on actual purchase history. This allows for highly targeted email campaigns.

Furthermore, it helps inventory management. If you update a product price in Square, those changes can be reflected in your marketing materials. This prevents you from promoting products at outdated prices or incorrect stock. It creates a single source of truth for your entire business operation.

For small businesses, the time saved is significant. Manual data entry is prone to human error and takes hours. Automation frees you to focus on customer service and product development. The integration pays for itself in saved labor hours and better data accuracy.

Common Mistakes and Troubleshooting

Even simple processes can have hurdles. If you see an error during the OAuth step, check these common issues:

• Clear browser cache: Old site data can interfere with redirects. Clear your cache and cookies, then restart.
• Account verification: Ensure you are logging into the correct Square account that holds the data you want to sync.
• Account status: Check that your Square account is active and not restricted for security reasons.
• Pop-up blockers: Sometimes browser extensions block the Square login window from opening. Try disabling them temporarily during the process.

The most common mistake is trying to create a second SeaText account for Square. This creates duplicate data and causes the API to fail to find your primary record. Always stick to your primary existing account.

Key Facts About the Square-SeaText Integration

Limitations and When This Advice Not Apply

This guide assumes you are using the standard versions of both SeaText and Square. If you use enterprise-level versions of either service, the interface may look different. Additionally, the platform does not support connecting multiple Square accounts to a single SeaText account. If you manage multiple stores with different Square accounts, you must use separate SeaText accounts for each one.

Frequently Asked Questions

Do I need a Square account to use SeaText?

No. SeaText works perfectly without Square. The integration is an optional feature that adds specific payment processing analytics.

Can I connect Square to SeaText without admin access?

No. You must have administrative rights in both accounts to authorize the data transfer.

Will connecting Square affect my existing SeaText data?

No. The integration only adds Square-related data. It does not delete or modify your existing site content.

How do I disconnect Square from SeaText?

Go to the Integrations section in SeaText, find Square, and click 'Disconnect.' You can also revoke access directly from your Square account settings.

What if I change my Square account password?

The OAuth token remains valid. You do not need to reconnect unless you manually revoke the token from your Square settings.

Is the connection secure?

Yes. SeaText uses OAuth 2.0, which ensures your Square password is never shared with SeaText. The entire connection tunnel is encrypted.

Yes — you can customize which languages SeaText targets for your Webflow site. The platform detects each visitor's language automatically and translates every page, post, product, and update into up to 125 languages without page limits or manual workflows. You select the markets you want to enter in the SeaText dashboard, and the translation agent handles detection and background translation from that point forward.

What isn't documented in the public configuration is fine-grained control over the detection logic itself — things like detection priority ordering, fallback language chains, or excluding specific URL paths from translation. The system is designed for "activate once, runs by itself" automation. If you need to override detection for specific sections or set custom fallback behavior, that level of configuration isn't exposed in the current public dashboard.

How SeaText Language Detection Works on Webflow

When a visitor lands on your Webflow site, SeaText reads signals — browser language headers, IP geography, and any existing language cookies — to determine the best language match from your enabled market list. The translation agent then serves the appropriate translated version instantly. New content you publish in Webflow is detected and translated in the background automatically, so you don't need to trigger translation jobs manually.

This differs from tools like Weglot, DeepL widgets, or Google Translate widgets, which often require managing language limits, page caps, word counts, DNS changes, or manual translation requests. SeaText's model is unlimited free activation with full automation after a one-minute install.

Step-by-Step: Choosing Your Target Languages

1. Install the SeaText snippet on your Webflow site (takes under a minute via custom code in project settings).
2. Open the SeaText dashboard and navigate to the Website Translation Agent.
3. Select your target markets from the 125 available languages. Each market you enable becomes a detection target.
4. Save and publish — detection and translation begin immediately for all current and future content.
5. Verify by visiting your site with different browser language settings or using a VPN to confirm the correct language serves.

The key decision point is step 3: which markets to enable. Every enabled language becomes a detection target. There's no separate "detection priority" setting — the system matches the visitor's strongest signal to your enabled list.

What You Can Control Today

• Market selection: Choose any subset of the 125 supported languages. Disabling a language means visitors with that preference fall back to your default language.
• Content scope: Translation covers every page, post, product, and update automatically — no page limits.
• Manual override: The dashboard hints at control for "important translations" — you can review and edit specific translations if the AI output needs adjustment.
• Tracking by language: Results are tracked per language and market so you can measure performance.

What You Cannot Configure (Based on Public Documentation)

• Detection priority ordering: No documented setting to rank browser language vs. IP vs. cookie signals.
• Fallback language chains: No documented way to specify "if French unavailable, serve English, then Spanish."
• Path exclusions: No documented option to exclude /admin, /api, or specific collection pages from translation.
• Custom detection rules: No documented rules engine for "visitors from campaign X see language Y."

If these controls are critical, you'd need to contact SeaText enterprise sales — the platform includes enterprise controls for "campaigns, sites, and regions" but specifics aren't public.

Comparison: SeaText vs. Other Webflow Translation Approaches

Takeaway: SeaText wins on automation and zero limits. Competitors win on documented detection granularity. Choose SeaText if you want "set and forget" with unlimited scale. Choose a competitor if you need documented control over detection logic today.

Practical Scenarios

Scenario 1: Launching in 5 European Markets

Enable German, French, Spanish, Italian, Dutch in the dashboard. Visitors from those regions get automatic detection and translation. New blog posts and product pages translate overnight. No DNS changes, no subdomain setup.

Scenario 2: Excluding a Staging Subdirectory

Not currently configurable in the public dashboard. Workaround: don't install the snippet on staging, or use Webflow's password protection which may block the translation agent.

Scenario 3: Forcing English for a Specific Campaign

Not documented. The Visitor Source Rewrite Agent matches pages to traffic sources (ads, email, referrals) but language detection appears separate from source-based rewriting.

Key Facts

Limitations and When This Advice Doesn't Apply

• Enterprise needs: If you need contractual SLAs, dedicated support, or custom detection logic, the public dashboard may not expose those controls. Enterprise demo requests are routed through a separate form.
• Non-Webflow platforms: This article covers Webflow specifically. SeaText works on other platforms but detection behavior may differ.
• Real-time personalization: Language detection is distinct from the Visitor Source Rewrite Agent (campaign matching) and AI Personalization Agent (context adaptation). They're separate agents.
• Dynamic content: Content loaded via client-side JS after initial render may have translation delays — the agent "watches the page for new text and translates it in the background."

Terminology

• Market: A language/region combination you enable for translation (e.g., "French (France)" vs "French (Canada)").
• Detection: The process of inferring a visitor's preferred language from browser headers, IP, and cookies.
• Fallback: The language served when no enabled market matches the visitor's preference — typically your site's default language.
• Translation Agent: The specific SeaText AI agent that handles website translation (one of several agents available).
• Background translation: Automatic translation of new/updated content without manual triggering.

FAQ

Can I set a custom fallback language chain?

Not documented in the public dashboard. The system appears to fall back to your site's default language when no enabled market matches. For custom chains, contact enterprise sales.

How do I exclude a specific page or path from translation?

No documented path exclusion feature. Workarounds: password-protect the area, don't install the snippet on that subdomain, or accept translation and manually override if needed.

Does detection use IP geolocation or browser language?

SeaText "detects each visitor's language" — the exact signal priority isn't public. Browser language headers are standard; IP geo is common. The Visitor Source Rewrite Agent separately reads campaign/referral data for content matching.

Can I force a specific language for paid traffic from a campaign?

Not as a documented detection rule. The Google Ads Landing Page Agent rewrites headlines/offers per keyword, and the Visitor Source Agent matches pages to traffic sources, but language detection appears to operate independently.

What happens when I add a new language in the dashboard?

Translation begins automatically for all existing and future content. No re-indexing or manual trigger needed.

Is there a limit on translated words or pages?

No. "No page limits, no language limits" on the free tier.

Can I edit a specific translation the AI got wrong?

Yes — the dashboard hints at control for "important translations" suggesting manual override is available for key content.

Verification Step

After enabling your target markets, visit your site with browser language set to each enabled language (Chrome: Settings → Languages → reorder). Confirm the correct translation serves. Check a newly published page after 15–30 minutes to verify background translation works. Review the SeaText dashboard's language/market tracking to see detection distribution.

Stop the test in your testing dashboard, set the winning AI variant as the default content for all visitors, and monitor performance post-deployment to confirm the gain holds. This is the cleanest way to end a test and lock in the improvement without losing data or confusing your team.

Step-by-step: How to stop a test

Follow these steps in order. Each one builds on the last, so don't skip ahead.

1. Confirm the win is real. Check that the variant has reached statistical significance and has enough sample size. Avoid the peeking trap—don't stop just because the numbers look good early. Use a confidence level of at least 95% if your testing tool supports it.
2. Stop the test in your dashboard. Find the test, click stop, and choose the winning variant as the default. In SeaText, you can use the Variants Edit panel to review and manually edit variants before you finalize the winner.
3. Set the winning variant as the default content for all visitors. This may mean publishing the variant or making it the control. Make sure the change is live for everyone, not just a segment.
4. Monitor performance after deployment. Track conversion rate and other key metrics for at least a few days. This confirms the gain holds in real traffic and catches any unexpected side effects.
5. Document the result. Record what you learned, the sample size, the confidence level, and the final lift. This helps you plan future tests and avoid repeating mistakes.

Prerequisites before you stop

Before you stop any test, make sure you have these in place:

• Statistical significance. The result should be unlikely to be due to chance. Most tools show this as a confidence percentage.
• Enough sample size. A small sample can give misleading results. Wait until the test has run long enough to cover multiple traffic patterns, like weekdays and weekends.
• No external changes. If you changed your ad campaigns, site design, or offers during the test, the results may be contaminated. Stop the test only if the environment stayed stable.
• Access to the testing dashboard. You need permission to stop the test and edit variants. In SeaText, you must have an account and the AI script installed and activated on your domain.

Verify the win is real

Don't trust a single metric. Look at the full picture:

• Check conversion rate by page, keyword, and variant. SeaText provides conversion reporting by page, keyword, and variant, so you can see if the win is consistent across segments.
• Look at secondary metrics. Bounce rate, time on page, and click-through rate can reveal if the variant is actually better or just gaming one metric.
• Run a sanity check. If the lift is huge (like 300%), it's probably a bug or a tracking error. Real wins are usually modest.
• Consider the peeking trap. If you checked the results multiple times and stopped as soon as it looked good, your confidence level is lower than it appears. Use a stopping rule before you start the test.

What to do after you stop

Once the winning variant is live, your work isn't done. Here's what to do next:

• Monitor for regression. Watch the conversion rate for at least a week. If it drops back to the old level, the win may have been a fluke or the variant may not work in all contexts.
• Update your documentation. Record the test hypothesis, the variant, the sample size, and the result. This builds a knowledge base for future tests.
• Plan the next test. Use what you learned to form a new hypothesis. Continuous testing is more valuable than a single win.
• Consider rolling out to other pages. If the variant worked on one page, test it on similar pages. SeaText's agents can run continuous tests across your site, so you can scale the winning approach.

Key facts about SeaText's testing

SeaText's CRO Optimizer agent is built for this exact workflow. Here are the facts from the source documentation:

Limitations and when this advice doesn't apply

This process assumes you have a proper A/B testing setup. It doesn't apply if:

• You're testing a brand-new page with no traffic. You need enough visitors to reach significance. If you have very low traffic, consider a longer test or a different method.
• You're using a tool that doesn't let you stop and set a default. Some tools only let you pause, not promote a variant. Check your tool's documentation.
• You're testing multiple variants at once. If you have more than two variants, you may need a more complex stopping rule, like a multi-armed bandit.
• You're in a regulated industry. If you need to prove the test was fair, you may need to keep the test running longer or document more thoroughly.

Also, SeaText requires a valid domain and an activated account. Development URLs like localhost are restricted, and you must wait at least five minutes after installation for the AI to link to your account. If you don't see your website name in the dashboard, contact support.

FAQ

How long should I run an A/B test before stopping?

Run it until you reach statistical significance and have enough sample size. There's no fixed time. A common rule is at least one full business cycle (a week) to cover different traffic patterns.

What is the peeking trap?

It's when you check the results repeatedly and stop as soon as the numbers look good. This inflates the chance of a false positive. Decide your stopping rule before you start the test.

Can I stop a test early if the variant is clearly winning?

Only if you have a pre-defined stopping rule, like a confidence level of 99% or a minimum sample size. Otherwise, you risk acting on noise.

What if the winning variant doesn't hold up after I deploy it?

Monitor performance for a few days. If the gain disappears, you may have had a false positive or the variant may not work in all contexts. Roll back to the original and investigate.

Does SeaText automatically stop tests and deploy winners?

SeaText's CRO Optimizer agent automatically identifies which text lifts conversion rate over time. You can review and edit variants in the Variants Edit panel, and then set the winner as the default. The agent runs continuously, so it can keep testing new variations after you deploy.

What metrics should I use to confirm a win?

Use conversion rate as the primary metric, but also check secondary metrics like bounce rate, time on page, and revenue per visitor. SeaText provides conversion reporting by page, keyword, and variant.

No, you cannot skip the five-minute wait after connecting Square. This period is mandatory to ensure data integrity; skipping it may lead to incomplete or incorrect customer information in SeaText. When you link your Square account, the system needs time to synchronize historical data and verify the connection handshake between both platforms.

To ensure a successful setup, follow these steps:

A common mistake is attempting to refresh the page immediately after pasting the code. This can interrupt the synchronization process, resulting in the AI remaining inert or failing to associate traffic correctly with your account.

The Technical Mechanics of Data Synchronization

The five-minute window is not an arbitrary delay. It is a critical technical phase known as the initial handshake. When you connect Square to SeaText, the platforms initiate a secure API exchange. This process verifies that both systems are talking to each other correctly. Once the handshake is established, SeaText begins pulling historical data points. This includes transaction history, customer profiles, and product metadata that to help build a baseline for the AI models.

The system must map Square data fields to the SeaText internal schema. This mapping requires significant processing power. If a user refreshes the page during this time, the script may break or restart the handshake. This can lead to 'ghost connections' where the dashboard thinks the link exists but cannot actually retrieve data. Waiting the full duration ensures that the data packet is fully assembled before the AI begins analyzing live traffic patterns.

Furthermore, the synchronization process involves database indexing. SeaText indexes your historical records to ensure fast retrieval later. If the AI is activated before indexing is complete, the analytics may provide outdated insights. This is because the AI relies on a complete dataset to predict future behavior. The five-minute window accounts for this indexing overhead.

Risks of Premature Activation

Attempting to bypass the waiting period poses several technical risks to your account health. The most immediate risk is data fragmentation. If the script starts running while the synchronization is halfway finished, it may capture incomplete session data. This results in gaps in your customer journey maps. You might see traffic spikes that have no corresponding conversion data in Square, leading to skewed business decisions.

Another risk is the failure of traffic association. SeaText uses unique tokens to link website visitors to specific Square customers. If the connection is rushed, these tokens might not register correctly in the local cache. This means the AI might fail to identify which marketing efforts led to a sale. For businesses relying on ROI tracking, this loss of data invalidates the primary value of the integration.

Finally, premature activation can lead to synchronization loops. If the system tries to write data to a database that is still locked for initial import, it can trigger timeout errors. This often requires the user to disconnect and reconnect the account entirely, wasting more time than the original five-minute wait would have taken.

How SeaText Verifies Connection Integrity

SeaText uses a multi-layer verification process to ensure your connection is stable. First, it performs a checksum validation. This ensures that the data received from Square matches the data sent, without corruption. Second, the system monitors the 'ping' frequency between the SeaText script on your site and the API. If the ping returns consistently, the connection is considered active.

The third layer is the data integrity check. SeaText scans a small sample of historical records to ensure they are readable and formatted correctly. Once these checks pass, the dashboard updates your status. This is the moment you will see your website name appear next to the SeaText logo. This visual indicator is the final signal that the background processes have completed successfully.

If you do not see this indicator after ten minutes, it suggests a failure in the verification chain. This usually happens due to script blocking by a browser extension or firewall settings. In such cases, manual intervention is required to resolve the blocked communication path.

Troubleshooting Common Connection Issues

Most connection issues stem from client-side interference rather than the synchronization process itself. If the five-minute mark passes without update, ensure your Javascript code is placed correctly in the <head> section. Placing it in the <body> can sometimes delay script execution long enough to cause a handshake timeout.

Another common issue is browser caching. Sometimes the browser stores an old version of your site that does not include the new SeaText script. Clearing your cache or testing the site in an incognito window can resolve this. This ensures you are seeing the live state of the script and the integration status.

Additionally, check for ad-blockers or privacy extensions. These tools often identify integration scripts as tracking pixels. If the script is blocked, SeaText cannot reach your site to verify the connection. You must whitelist the SeaText domain within these tools to allow the data synchronization window to function without interruption.

The Role of Historical Data in Analytics

The data pulled during those first five minutes is the foundation for your long-term analytics. SeaText does not just look at what is happening now; it looks at what has happened before. Historical data allows the AI to understand 'normal' behavior. For example, if a customer usually buys on Tuesdays, the AI needs that history to recognize a Monday purchase as an anomaly.

Without this baseline, the AI would be reactive rather than proactive. It would optimize based only on the last few minutes of traffic, leading to high volatility in recommendations. By allowing the synchronization to complete, you provide the AI with the context of your business's sales cycles. This context is what allows for high-accuracy predictions, especially for high-ticket items that have longer nurturing periods in Square.

Best Practices for Long-Term Integration

To maintain a healthy connection after the initial setup, avoid frequent manual refreshing. While the five-minute wait is only mandatory for the initial link, constant dashboard refreshes can occasionally trigger unnecessary sync checks. Use the SeaText dashboard to monitor status rather than refreshing your live website.

It is also best practice to keep your domain structure stable. If you move from a development domain to a production domain, you must create a new account. SeaText accounts are linked to a single primary URL for security reasons. Changing the URL without proper re- will break the synchronization and require the five-minute wait again.

Lastly, regularly review your 'Variants Edit' section. Once the integration is stable, the AI will provide automatic translations and variants. Reviewing these monthly ensures that the automated optimizations remain aligned with your current brand voice and inventory levels in Square.

You can confirm SeaText's tracking code is installed correctly by triggering a session on your own site and then checking the SeaText dashboard for a connection signal. The process takes about 5–10 minutes and requires no technical tools beyond your browser and the SeaText account page.

Quick verification checklist

Before you start, make sure you have:

• A live SeaText account
• The JavaScript snippet pasted into your site's header or footer (depending on platform)
• The site published and publicly accessible (not localhost or a password-protected staging domain)
• Access to your SeaText dashboard in a separate browser tab

Step-by-step verification

1. Open your website in a new browser tab. Use a normal browsing session — incognito works fine.
2. Stay on any page for at least 40 seconds. Scroll, click, or just wait. This dwell time lets the script initialize and send a heartbeat to SeaText.
3. Refresh the page once or twice. Each reload reinforces the connection.
4. Switch to your SeaText dashboard tab. Wait 5 minutes from the first visit.
5. Look at the top of the dashboard. Your website name should appear next to the SeaText logo. That text is the confirmation that the domain is linked and the script is firing.
6. If nothing appears after 10 minutes, re-check the installation. Common issues: the snippet is in the wrong place, a CMS cache hasn't cleared, or a security header blocks the script.

How the verification signal works

SeaText's snippet is a small JavaScript file that loads asynchronously. When a visitor (including you) lands on a page with the snippet, the script:

• Collects basic session data
• Sends a ping to SeaText's servers with the account ID embedded in the snippet
• Registers the domain against your account

The dashboard polls for that registration. Once the server sees a valid ping from your domain, it updates the UI to show the site name next to the logo. This usually happens within 5 minutes but can take up to 10 if the network is slow or the script loads late.

Common installation mistakes that break verification

Platform-specific verification notes

Weebly

Paste the snippet in Settings → SEO → Footer Code, then Save and Publish. The verification steps above apply unchanged.

WordPress

Use a header/footer plugin (e.g., WPCode, Insert Headers and Footers) to paste the snippet in the <head> section. Clear any caching plugin (WP Rocket, W3 Total Cache) after saving.

Shopify

Add the snippet in Online Store → Themes → Edit Code → theme.liquid just before </head>. Save and verify.

Custom HTML / static sites

Place the snippet immediately before </head> on every page template. Deploy and verify.

What to do if verification fails after 10 minutes

1. View page source (Ctrl+U / Cmd+Option+U) and search for seatext or your account ID. If it's missing, the snippet didn't publish.
2. Open DevTools → Network tab, filter for JS, reload. Look for a request to SeaText's domain. A 200 response means the script loaded; a 404 or blocked status means CSP or network issues.
3. Check the Console tab for JavaScript errors referencing SeaText.
4. Confirm the domain in your SeaText account matches the live URL exactly (including www vs non-www).
5. Contact SeaText support with your account email and the URL. They can see server-side whether pings arrived.

Key facts

Limitations and when this advice doesn't apply

• If your site uses a strict CSP without SeaText's domain allowlisted, the script will load but fail to send data — verification will never succeed until CSP is updated.
• Single-page applications (SPAs) that navigate without full reloads may need the snippet re-initialized on route change; the basic verification still works for the initial load.
• Sites behind authentication (intranets, member areas) can verify only if you're logged in during the test; the script must load on the authenticated page.
• This verification confirms the snippet fires and registers the domain. It does not confirm that AI agents (translation, CRO, chat, etc.) are configured or active — those are separate steps in the dashboard.

Terminology

• Snippet — The JavaScript code block provided in your SeaText account, unique to your account ID.
• Heartbeat / ping — The lightweight network request the snippet sends to SeaText servers to announce a live session.
• Dashboard — The web UI at seatext.com where you manage sites, agents, and settings.
• Primary URL — The single domain an account is bound to; additional domains require separate accounts.

FAQ

Can I verify installation without waiting 5 minutes?

No. The 5-minute window is built into SeaText's backend polling. You can confirm the script loads instantly via DevTools, but the dashboard connection signal requires the server-side registration cycle.

Does the verification work on a staging subdomain?

Only if the subdomain is a real, public DNS record (e.g., staging.example.com). Dynamic preview URLs from Netlify, Vercel, or similar platforms are restricted and will not register.

What if I have multiple languages or subdirectories?

The snippet registers the root domain. All paths and subdirectories under that domain are covered automatically once the root is verified.

Can I use the same snippet on two different domains?

No. Each SeaText account is tied to one primary URL. Using the same snippet on a second domain will either fail to register or attribute traffic to the wrong account. Create a second account.

Why does the dashboard show my site name but the AI agents don't run?

Verification only proves the tracking code is installed. Agents (Translation, CRO, Chat, etc.) must be activated individually in the Main AI Hub → Configuration. Check each agent's status toggle.

What if I'm using a tag manager (GTM, Tealium)?

Paste the snippet into a Custom HTML tag set to fire on All Pages (Page View). Publish the container, then run the same 40-second / 5-minute verification.

How do I know the snippet is the current version?

The snippet in your SeaText account is always the latest. If you copied it months ago, re-copy from the account page to ensure you have any updates.

You can verify SeaText AI is working on your Odoo site in under two minutes. Open the page where you added the Embed Code block, view the page source, and search for the SeaText script tag. Then open your browser's developer console, reload the page, and check the Network tab for requests to SeaText servers. If both checks pass, the AI is active.

This article walks through the exact verification steps, common mistakes that cause false negatives, and how to confirm the AI is actually doing its job rather than just loading.

Prerequisites Before You Verify

You need three things in place before verification makes sense:

• A SeaText AI account with the JavaScript snippet copied from your dashboard.
• An Odoo Website page where you added the snippet using the Embed Code block.
• A live, non-localhost domain. SeaText restricts development URLs like localhost for security reasons.

If you are testing on a staging subdomain, create a separate SeaText account for that domain. Each account is linked to a single primary URL.

Step 1: Confirm the Embed Code Block Is Saved

Log in to your Odoo account and open the Website module. Navigate to the page where you placed the Embed Code block. Click Edit to open the editing panel.

Scroll to the Dynamic Content section in the Blocks panel. Find the Embed Code module and click its Edit button in the right panel. The pop-up window should show the SeaText JavaScript snippet you pasted earlier. If the field is empty, the snippet was never saved.

One common mistake: pasting the snippet into the wrong block or saving the page without clicking Save inside the Embed Code pop-up first. Odoo requires two saves—one for the block and one for the page.

Step 2: Check the Page Source for the Script Tag

Open the live page in a browser. Right-click anywhere on the page and select View Page Source. Press Ctrl+F (or Cmd+F on Mac) and search for seatext or the unique script URL from your dashboard.

If the script tag appears in the source, the block is rendering. If it does not appear, the block may be hidden on desktop. SeaText's Odoo instructions tell you to select Hide on Desktop in the Visibility section. That hides the visual block but does not remove the script from the page source. If the script is missing entirely, the block was not saved or was placed on a different page.

Step 3: Watch Network Requests in the Developer Console

Open your browser's developer tools. In Chrome or Edge, press F12 or right-click and choose Inspect. Go to the Network tab and reload the page.

Filter the requests by typing seatext in the filter box. You should see at least one request to a SeaText domain. This confirms the script is executing, not just present in the HTML. If you see the script tag in the source but no network request, a browser extension, content security policy, or script error may be blocking execution.

Step 4: Confirm the AI Is Inert Until Activated

SeaText states that the AI remains inert until activated. This means a successful installation does not automatically rewrite your page. You must activate the agent from your SeaText dashboard for the AI to start working.

To verify activation, make a small, reversible change in your SeaText dashboard—such as enabling a test agent on a single page—then check whether the page content changes after a reload. If nothing changes, the script may be loading but the account is not linked to this domain.

Step 5: Test with a Real Domain, Not Localhost

SeaText restricts development URLs such as localhost for security reasons. If you are testing on localhost or a dynamic development domain, the AI may not associate traffic with your account. Use a valid, real domain for verification.

If you need to test on a staging domain, create a separate SeaText account for that domain. Do not reuse the production account's snippet on a staging URL.

Common Mistakes That Cause False Negatives

These issues make a working installation look broken:

• Checking the wrong page. The snippet only runs on pages where you added the Embed Code block.
• Searching for the wrong string. Search for seatext or the exact script URL, not a generic term like "AI".
• Blocked by an ad blocker. Some ad blockers block third-party scripts. Disable extensions and retest.
• Content Security Policy. If your Odoo site has a strict CSP, it may block external scripts. Check the console for CSP errors.
• Not activated in the dashboard. The script loads, but the AI stays inert until you activate it.

How to Verify the AI Is Actually Working, Not Just Loading

A loaded script is not the same as a working AI. To confirm the AI is doing its job:

1. Activate a specific agent in your SeaText dashboard, such as the AI SEO Content Factory or the Google Ads Landing Page agent.
2. Open the target page in an incognito window to avoid cached content.
3. Check whether the page content, headlines, or product copy changed as expected.
4. If you enabled the AI SEO agent, check whether new Q&A pages or FAQ content appear on your site after the agent runs.
5. If you enabled the translation agent, check whether a non-English version of the page renders correctly.

If the script loads but no content changes, the account may be linked to a different domain, or the agent may not be activated for that page.

Key Facts About SeaText AI on Odoo

Limitations and When This Advice Does Not Apply

This verification process assumes you installed SeaText using the official Odoo integration method described in the source pack. If you used a different method—such as a custom module, a tag manager, or a Cloudflare edge script—the steps may differ.

The network request check works only if your browser's developer tools are not blocked by your organization's IT policy. Some managed browsers disable the console or network inspection.

If your Odoo site uses aggressive caching or a CDN, you may need to purge the cache before the script appears in the page source. A cached page can show an older version without the snippet.

Frequently Asked Questions

How long does it take for SeaText AI to start working after installation?

The script loads immediately after you save the Embed Code block and publish the page. However, the AI remains inert until you activate an agent from your SeaText dashboard. Activation timing depends on the agent and your site traffic.

Can I verify SeaText AI on a staging site?

Yes, but you must create a separate SeaText account for the staging domain. Each account is linked to a single primary URL, and reusing the production snippet on a staging domain will not work reliably.

Why is the SeaText script not showing in my page source?

The most common reasons are: the Embed Code block was not saved, the block was placed on a different page, or a caching layer is serving an old version of the page. Check the block in Odoo's editor first, then purge your cache.

Does hiding the Embed Code block on desktop affect the script?

No. The Hide on Desktop option only hides the visual block. The JavaScript snippet still loads in the page source and executes normally.

What should I do if the script loads but the AI does nothing?

Check your SeaText dashboard to confirm an agent is activated for the domain. Also verify that the domain in your browser matches the primary URL linked to your SeaText account.

Can I use one SeaText account for multiple Odoo websites?

No. SeaText requires a separate account for each website or domain. This includes development and production domains.

The short answer: the embed code block is usually there, but it is easy to miss. In recent Odoo releases the block is called Embed Code and it sits under Dynamic Content in the website builder's Blocks panel. If your Odoo version is older, your Website module is not up to date, or your user account has limited editing rights, the block can be renamed, hidden, or unavailable.

Start by putting the page in Edit mode, opening the Blocks panel, and looking for Dynamic Content. If it is still missing, use the diagnostic sequence below before you try a workaround.

Why the Embed Code block can disappear

Odoo's website builder stores reusable page pieces in a Blocks panel. The developer documentation calls these pieces building blocks or snippets. The Embed Code block is one of those snippets, and it is normally grouped under Dynamic Content.

You can miss it for several reasons:

• You are not in Edit mode. The Blocks panel does not appear until you click Edit.
• The block has a different name. Older Odoo versions and some themes call it HTML Code, Custom Code, or Code.
• The Website module is outdated. When modules are not updated, some snippets are missing or have new names.
• Your user role is limited. Some accounts can edit content but do not see advanced blocks.
• Developer mode is off. Some technical snippets only appear when Odoo runs with developer mode enabled.
• A custom theme hides it. Themes can change which blocks are available on a page.

This matters because the Embed Code block is often the safest way to add a third-party script to a page. If you cannot find it, you might paste code into the wrong place or use a workaround that breaks the page. Fix the visibility issue first.

Follow this diagnostic sequence

Work through these steps in order. They separate simple visibility mistakes from real installation problems.

1. Put the page in Edit mode. If you do not see an Edit button, you probably do not have editor access. Ask your Odoo administrator to check your user role.
2. Open the Blocks panel. In most themes, the panel appears after you click Edit at the top-right of the page.
3. Search by name. If your version has a search box, type Embed Code or HTML.
4. Look under Dynamic Content. Scroll past columns, images, and text blocks. Embed Code is usually near the end of that category.
5. Check the Odoo version. Older releases may call the block HTML Code or Custom Code.
6. Update the Website module. Some missing snippets are fixed by updating modules. In developer mode, use the Apps screen to update the website module.
7. Turn on developer mode. Enable it from Settings, then open the Blocks panel again.
8. Verify user permissions. Try the same page with an administrator account. If the block appears there, the problem is your role.
9. Test on a clean page. A page template or custom theme can hide blocks. Create a new blank page and check again.
10. Try a fallback. If the block is genuinely missing, use an HTML Code widget or the HTML view in a text block while you fix the root cause.

Likely causes and the fix for each

Where the Embed Code block lives in Odoo

In the Odoo website builder, blocks are grouped by purpose. Dynamic Content is the category for maps, social feeds, and custom code. The Embed Code block is normally at or near the end of that list, so scroll down.

Odoo's developer documentation groups blocks into structure blocks and inner content blocks. Structure blocks create rows and columns. Inner content blocks, like Embed Code, are placed inside those structures. If your theme hides inner content blocks, you lose the Embed Code option too.

Name changes across versions

• Recent Odoo: Embed Code.
• Older Odoo: HTML Code or Custom Code.
• Custom themes: Some themes relabel the block or move it under Advanced or Custom.

How to add an embed code block step by step

When the block is visible, the process is short.

1. Log in to your Odoo account and open the Website module.
2. Open the page you want to edit.
3. Click Edit to open the editing panel.
4. In the Blocks panel, scroll to Dynamic Content.
5. Find the Embed Code block and drag it to the spot you want.
6. Click Edit in the right panel.
7. Paste the code in the pop-up window.
8. Click Save.
9. Use the Visibility options if needed, then save again.

What to do if the block still won't appear

• Use the HTML/Code widget. Some Odoo themes include a separate HTML/CSS/JS widget that accepts the same pasted code.
• Use the HTML view in a text block. Open a text block, switch to HTML view, and paste the code inside the content.
• Create a custom snippet. A developer can register a new snippet in a theme. This is more work but gives you a clean block for the code.
• Contact your administrator. They can update modules, check permissions, and test the site in developer mode.

Installing a script like SEATEXT AI: what the integration assumes

SEATEXT AI's Odoo integration uses this exact block. The flow is simple:

1. Create a SEATEXT AI account.
2. Copy the JavaScript code from the account area.
3. Add the Embed Code block to the page and paste the script.
4. Click Save.

According to the integration documentation, the AI remains inert until activated, so the page does not change until you turn the agents on. If you do not want the block itself to be visible, use the Hide on Desktop option in the Visibility section.

Domain rules matter. Each SEATEXT AI account is linked to a single primary URL. For multiple domains, create separate accounts. Use a real domain, not localhost, because development URLs are restricted and dynamic development domains may not work reliably.

Key facts: Seatext Odoo integration

Limitations and when this advice does not apply

• The Website app is not installed. If the Website module itself is missing, there is no Blocks panel. Enable the Website app first.
• Your theme removes the block. A page template or custom theme can hide Dynamic Content. Temporarily switch to a default theme to confirm.
• Your script must load in the page head. The Embed Code block places code where you put it. Scripts that need to run before the page loads may not work correctly.
• You need a site-wide script. The Embed Code block adds code to one page. For code on every page, use Odoo's head code area or a custom module.
• You are testing on localhost. A provider may block localhost or development domains, so the script may not run even after you paste it.

Terminology you will see in Odoo

• Block or snippet: a reusable piece of page content in the website builder.
• Blocks panel: the panel that lists available snippets when you click Edit.
• Dynamic Content: a category in the Blocks panel for maps, feeds, and custom code.
• Embed Code block: a block that accepts raw HTML, CSS, and JavaScript.
• Developer mode: a debugging mode that exposes more technical options.

Frequently asked questions

Why can't I see the Blocks panel at all?

You are probably not in Edit mode, or your user account does not have website editor permissions. Click Edit on the page. If no Edit button exists, ask your Odoo administrator to grant access.

Is Embed Code the same as HTML Code?

They serve the same purpose. Recent Odoo versions call the block Embed Code. Older versions and some themes call it HTML Code or Custom Code.

Can I add an embed code without the Embed Code block?

Yes. Use an HTML/Code widget if your theme has one, or use the HTML view inside a text block. For permanent or site-wide scripts, a custom module or snippet is better.

Why is my embed code not working after I save it?

Check the code, the page, and the block's visibility settings. Confirm the domain is allowed by the provider and that the script does not need to be in the page head.

Does SEATEXT AI work on localhost?

No. Development URLs such as localhost are restricted, and dynamic development domains may not work reliably. Use a valid real domain.

Do I need a separate SEATEXT AI account for each website?

Yes. Each account is linked to a single primary URL, so create one account per domain.

SeaText translates WordPress pages, posts, products, and updates automatically across 125 languages. The system detects new content when you publish and translates it in the background. However, content that appears only after JavaScript executes — contact forms, modal popups, infinite-scroll items, AJAX-filtered product grids — may not be captured during the initial page scan. You can still edit these translations manually using SeaText's visual editor once the dynamic elements are visible on the page.

How SeaText Detects and Translates Content

SeaText works by scanning the rendered HTML of your WordPress pages. When you activate the plugin, it crawls your site, identifies translatable text nodes, and sends them to the translation engine. New pages, posts, and product updates are picked up automatically because WordPress fires standard hooks that SeaText listens for. The translation agent then serves the appropriate language version to each visitor based on their detected locale.

This approach covers the vast majority of site content: headlines, body copy, product descriptions, menu items, widget text, and taxonomy terms. The visual editor lets you click any translated string on the live frontend and override it instantly. Your manual edits are stored separately from machine translations, so they persist even if you switch translation engines or re-translate a page.

Why Dynamic Content Can Be Missed

Dynamic content is any text that does not exist in the initial HTML response from the server. Common examples include:

• Contact form validation messages and success notices injected via AJAX
• Modal popups for newsletters, cookie consent, or login forms loaded by JavaScript
• Product variations, pricing tables, or upsell blocks fetched after page load
• Infinite-scroll blog feeds or paginated comment sections
• Faceted search results that update without a full page reload
• Chat widgets, calculators, or configurators rendered by third-party scripts

Because SeaText's initial scan runs on the server-side HTML, these client-side additions are invisible to the automatic translation pipeline. They will appear in the site's default language until you take action.

Step-by-Step: Making Dynamic Content Editable in SeaText

1. Load the page in the visual editor. From the WordPress admin, go to SeaText → Translations and click "Visual Editor." This opens your live site with an editing overlay.
2. Trigger the dynamic element. Interact with the page exactly as a visitor would: submit the form to see the success message, click the button that opens the popup, scroll to trigger infinite load, or use the faceted search filter.
3. Wait for the content to appear. Once the JavaScript-rendered text is visible on screen, SeaText's frontend script will detect new text nodes in the DOM.
4. Click the new text to edit. Hover over the dynamic content. If SeaText has registered it, you'll see the edit icon. Click to open the inline translation editor for that string.
5. Enter your manual translation. Type the corrected or preferred translation for each target language. Save. The override is stored immediately and will serve to all visitors in that language.
6. Repeat for each language. Use the language switcher in the visual editor toolbar to verify and edit the same dynamic string in other languages.
7. Publish and verify. Exit the visual editor. Visit the page as a regular user in each language to confirm the dynamic content appears correctly translated.

Common Scenarios and Practical Workarounds

Contact Form Messages

Most WordPress form plugins (Contact Form 7, Gravity Forms, WPForms, Ninja Forms) inject validation and success messages via AJAX. After submitting a test form in the visual editor, wait for the message to appear, then edit each language version. If the form uses JavaScript-based field labels or placeholders, trigger focus events to reveal them.

Modal Popups and Lightboxes

Newsletter signups, exit-intent offers, and cookie banners often load in modals. Open the modal in the visual editor, then click each text element — headlines, button labels, privacy policy links, close-button aria-labels. Edit each one per language.

AJAX Product Filters and Infinite Scroll

WooCommerce sites with AJAX filtering or infinite scroll load product titles, prices, and "Add to cart" buttons dynamically. In the visual editor, apply a filter or scroll down. New product cards will appear. Click each translatable element to register and edit it. Note: you may need to repeat this for each filter combination if the content differs.

Third-Party Widgets and Embedded Apps

Chat widgets, calculators, booking engines, and review widgets often render inside iframes or shadow DOMs. SeaText cannot reach inside cross-origin iframes. For same-origin widgets, trigger the widget in the visual editor and attempt to edit. If the text is not selectable, you may need to translate it at the source (the widget's own settings) or use a JavaScript-based translation approach outside SeaText.

Limitations and When This Approach Does Not Apply

• Cross-origin iframes: SeaText cannot access or translate content loaded from another domain inside an iframe (e.g., a hosted payment form or external chat widget). Translate at the source or use the provider's localization settings.
• Shadow DOM: Web components using shadow DOM encapsulate their markup. SeaText's DOM scanner does not penetrate shadow boundaries. Check if the component exposes a translation API.
• Content loaded after visual editor session ends: If dynamic content appears only after a specific user action that you cannot replicate in the editor (e.g., a personalized upsell shown only to logged-in customers with a certain purchase history), you must either simulate that state in the editor or accept that the string will remain in the default language for those users.
• High-frequency real-time updates: Live sports scores, stock tickers, or collaborative editing cursors change too rapidly for manual translation. These require a programmatic translation approach, not manual overrides.

Key Facts About SeaText's Translation Coverage

Terminology Quick Reference

• Visual Editor: SeaText's frontend overlay that lets you select and edit translated strings directly on your live site.
• Machine Translation (MT): The automatic, AI-generated translation produced by SeaText's engine for each language.
• Manual Override: A human-edited translation that replaces the MT output for a specific string in a specific language.
• Dynamic Content: Text rendered in the browser via JavaScript after the initial HTML load (AJAX, modals, infinite scroll, etc.).
• DOM Scan: The process by which SeaText identifies translatable text nodes in the page's Document Object Model.
• Translation Memory: SeaText's store of previous translations and manual edits, used to maintain consistency and preserve overrides.

Frequently Asked Questions

Do I need to re-scan the site after adding dynamic content translations?

No. Manual edits made in the visual editor are saved immediately to SeaText's translation memory. They will be served to visitors without a full site re-scan. However, if you add entirely new dynamic elements (e.g., a new popup), you should open the visual editor on a page where they appear and register them once.

Will my manual edits to dynamic content be overwritten by automatic re-translation?

No. SeaText stores manual edits separately from machine translations. Automatic re-translation only affects strings that have not been manually overridden. Your dynamic content edits are safe.

Can I export or bulk-edit dynamic content translations?

SeaText's dashboard translation list view includes search and filter. You can locate dynamic strings by searching for partial text (e.g., "successfully submitted" or "newsletter") and edit multiple entries in the table interface without returning to the visual editor each time.

What if the dynamic content differs per user (personalization, A/B tests)?

SeaText translates based on what is rendered in the DOM during the editing session. If personalization shows different text to different users, you must edit each variant separately by simulating the relevant user state in the visual editor (e.g., logging in as a test user with the target profile).

Does SeaText translate content inside iframes?

Only same-origin iframes. Cross-origin iframes (payment forms, external chat widgets, embedded maps) are blocked by browser security policy. Translate those at the source provider's dashboard.

How do I handle dynamic content that loads only for specific geographic visitors?

Use the visual editor's language switcher to preview the page as a visitor from that region would see it. If the dynamic content is geo-targeted at the server level, you may need to use a VPN or browser dev tools to spoof the location while editing.

Is there a way to automate dynamic content registration instead of manual clicking?

SeaText does not currently offer a programmatic API to register dynamic strings without the visual editor. For high-volume dynamic content (e.g., thousands of AJAX-loaded product variants), consider translating at the data source (product feed, headless CMS) so the text arrives in the initial HTML already translated.