How to Fix the 'SeaText not found' Error on Weebly

What the 'SeaText not found' error actually means

The 'SeaText not found' error appears when your Weebly site cannot detect the SeaText AI script. SeaText activates only after its JavaScript snippet loads on your published pages. If the code is missing, truncated, or sitting in the wrong field, the platform cannot link your website to your SeaText account.

This is not a Weebly server outage or a domain problem. It is a script placement issue. The fix is usually quick, but you need to check the code location before you re-publish.

Start with the exact symptom

Before changing anything, note where you see the error. The most common reports are:

• SeaText dashboard shows no website name next to the logo after installation.
• You see a 'not found' or 'not detected' message on the SeaText account page.
• Your Weebly pages load normally, but SeaText features never activate.
• You pasted the code, waited, and still see no connection.

Each symptom points to the same root area: the JavaScript snippet is not being read from your live Weebly site.

Diagnosis order: check these in sequence

Work through this order. It saves time and avoids re-publishing repeatedly.

1. Confirm you copied the full code. Open your SeaText account and copy the JavaScript snippet again. A partial copy is the most common cause.
2. Check the Weebly field. The code belongs in Settings > SEO > Footer Code, not in a page element, header field, or blog post.
3. Verify the domain. Each SeaText account is linked to one primary URL. If you installed the code on a development domain or localhost, SeaText may not associate the traffic with your account.
4. Save and publish. Saving inside the editor is not enough. You must click Publish for the change to reach your live site.
5. Visit the live site and wait. SeaText asks you to visit or refresh your website several times and stay on a page for at least 40 seconds. This activates the AI and links it to your account.
6. Wait five minutes. The website name should appear next to the SeaText logo at the top of your account page. If it does not appear after 10 minutes, contact SeaText support.

Common mistakes that cause the error

Most failed installations share one of these mistakes. Check each one before contacting support.

Pasting the code into the wrong Weebly field

Weebly has several places where you can add custom code. The SeaText snippet must go into the Footer Code section under Settings > SEO. Placing it in the header, a page's custom HTML element, or a blog post will not work reliably.

Copying only part of the snippet

The JavaScript code is long. If you select it quickly, you may miss the opening or closing tags. Copy the code using the dedicated copy button in your SeaText account rather than dragging your cursor across the text.

Using a development or localhost URL

SeaText restricts development URLs such as localhost for security reasons. Dynamic development domains may not function properly because SeaText cannot reliably associate traffic with your account. Use a valid, real domain for the installation.

Forgetting to publish after saving

Weebly's editor saves your changes, but they do not go live until you click Publish. If you only saved, the old page without the SeaText code is still what visitors and SeaText see.

Expecting instant activation

SeaText is inert until activated. After publishing, you must visit or refresh your website several times and stay on a page for at least 40 seconds. Then wait up to five minutes for the website name to appear in your SeaText account.

Step-by-step fix for Weebly

Follow these steps exactly. The order matters because each step depends on the previous one.

1. Log in to your SeaText account. Find the JavaScript code section. Use the copy button to copy the full snippet.
2. Open Weebly. Go to Website > Edit Site in the left-hand menu.
3. Select your project. Click the Edit button to enter edit mode.
4. Open Settings. Inside the website edit mode, click Settings.
5. Go to SEO. Click the SEO option.
6. Paste into Footer Code. In the Footer Code section, paste the JavaScript snippet you copied from SeaText.
7. Save. Click Save.
8. Publish. Click Publish to push the change to your live site.
9. Activate. Visit or refresh your website several times. Stay on a page for at least 40 seconds.
10. Wait and verify. Wait at least five minutes. Check whether your website name appears next to the SeaText logo at the top of your account page.

If the name does not appear after 10 minutes, contact SeaText support. The issue may be specific to your Weebly theme or account configuration.

When the error is not a code placement problem

Sometimes the code is correct, but the error persists. Check these less common causes.

Multiple domains or accounts

SeaText links each account to a single primary URL. If you need SeaText on multiple domains, such as a development domain and a production domain, you must create separate accounts for each domain. Using one account for two domains will cause detection failures.

Theme conflicts

Some Weebly themes or third-party plugins may interfere with custom footer scripts. If you recently changed themes or added a plugin, test the SeaText code on a clean page or temporarily disable the conflicting element.

Browser cache

Your browser may be serving a cached version of your site without the new code. Clear your browser cache or test in a private browsing window after publishing.

Weebly publishing delay

Weebly occasionally takes a few minutes to propagate changes. If you published correctly, wait 10 to 15 minutes before assuming the installation failed.

Key facts about SeaText on Weebly

What happens if you ignore the error

If you leave the 'SeaText not found' error unresolved, none of the SeaText AI features will run on your Weebly site. The script remains inert until activated. You will not get the conversion, translation, or SEO benefits you set up the account for.

More importantly, a broken installation can create a false sense of security. You may think SeaText is optimizing your pages when it is not. Check the connection status in your SeaText account regularly, especially after theme changes or Weebly updates.

Limitations and when this advice does not apply

This guide covers the standard Weebly integration path. It does not apply if:

• You are using a different website builder, such as WordPress, Shopify, or Wix. The code placement steps differ.
• Your SeaText account is suspended or has an expired subscription. A billing issue can prevent activation even with correct code.
• Your Weebly site is on a custom domain with DNS problems. SeaText may not be able to reach your site if the domain is misconfigured.
• You are testing on a localhost or dynamic development domain. SeaText restricts these for security reasons.

If you have checked all the steps above and the error persists, contact SeaText support with your account email, the Weebly site URL, and a screenshot of the Footer Code field.

Frequently asked questions

Why does SeaText say 'not found' after I pasted the code?

You likely pasted the code into the wrong field, copied only part of the snippet, or forgot to publish. Check Settings > SEO > Footer Code, re-copy the full code, save, and publish.

How long does SeaText take to detect my Weebly site?

After publishing, visit or refresh your site several times and stay on a page for at least 40 seconds. Wait at least five minutes. If the site name does not appear after 10 minutes, contact support.

Can I use one SeaText account for multiple Weebly sites?

No. Each SeaText account is linked to a single primary URL. Create a separate account for each website or domain.

Does SeaText work on a Weebly development domain?

Development URLs such as localhost are restricted for security reasons. Use a valid, real domain for the installation.

What if I changed my Weebly theme after installing SeaText?

Theme changes can remove or alter custom footer code. Re-check the Footer Code field and re-publish if the snippet is missing.

Do I need to keep the SeaText code in the footer forever?

Yes. The script must remain in the Footer Code section for SeaText to function. Removing it will cause the 'not found' error to return.