To activate Seatext on your Wix site, you need to trigger the connection by loading your site in a browser, refreshing it several times, and staying on the page for at least 40 seconds. After that, wait up to five minutes for your website name to appear next to the SEATEXT logo in the dashboard. That confirms the script is live and linked to your Seatext account.

Before you start: two requirements

You need a Seatext account and a paid Wix plan. Wix only lets you add custom code on paid plans, not on the free plan. Also, each Seatext account is linked to a single primary URL. If you want to use Seatext on another domain, create a separate account for that domain.

Step-by-step: refresh your Wix site to activate Seatext

1. Log in to Seatext and copy the JavaScript snippet from the integration page.
2. In Wix, go to the admin area and open Settings.
3. Scroll down to Custom Code under Advanced.
4. Click Add Code in the Head section.
5. Paste the copied Seatext JavaScript into the “Paste the code snippet here” box.
6. Under “Add Code to Pages”, choose All pages.
7. Select Load code on each new page and click Apply.
8. Open your Wix site in a browser. Refresh it several times and stay on the page for at least 40 seconds.
9. Go back to your Seatext dashboard and wait for your website name to appear next to the SEATEXT logo.

This sequence matters. If you skip the refresh step or leave after a few seconds, the script may not link to your account.

Activation checklist

• Seatext account created and code copied.
• Paid Wix plan active.
• Code pasted under Head and set to All pages.
• Each new page loads the code.
• Site visited and refreshed several times.
• At least 40 seconds spent on the page.
• Website name visible in Seatext dashboard within 5 minutes.

Why the refresh step exists: technical mechanics

The Seatext script stays inert until it detects a real visit from a valid domain. When you load and refresh the page, that visit links to your Seatext account. The 40-second dwell time gives the script enough time to register the session and connect the URL to your account. This design prevents accidental activations from bots or preview modes. The script checks that the domain matches the primary URL registered to your Seatext account. Only a genuine browser visit with proper dwell time satisfies this check.

You don't need to update anything else in Wix. The refresh is just the activation trigger, not a content update. Once the connection shows in the dashboard, the script is ready for the next step. Keep the page open in your browser for at least 40 seconds before you refresh again. The exact number of refreshes isn't fixed; the goal is to create a valid session that matches your account's primary URL.

What “refresh” means in this context

In Wix, refreshing usually means updating your site's content. In this case, “refresh” means reloading your live site in a web browser. You can press F5 or click the reload icon while the site is open. This tells the Seatext script that a real visitor is on the page. Do not confuse this with Wix's “refresh” button in the editor. The activation requires the published, live URL that matches your Seatext account's primary domain.

How to verify activation in the dashboard

After the refresh, wait at least five minutes. The dashboard should show your website name at the top of the page next to the SEATEXT logo. If that name doesn't appear after 10 minutes, contact Seatext support immediately. This usually means the script was not installed correctly or the page was not visited with a valid domain. Seatext needs time to match the visit to your account. The dashboard name doesn't update instantly. Planning for a five-minute wait avoids checking too early and thinking something is broken. If 10 minutes pass with no name, support can check whether the script actually loaded on your domain.

Key facts: Seatext + Wix activation

Multiple domains and separate accounts

Seatext links each account to one primary URL. If you use a development domain and a production domain, create two Seatext accounts. Otherwise the script may not associate traffic with the right account. This is not a Wix limitation; it's how Seatext matches visits to a single site. For agencies managing client sites, each client domain needs its own Seatext account. You cannot use one account across multiple domains even if you own them all.

Limitations and edge cases

• Localhost addresses are blocked for security. Use a real domain.
• Dynamic development domains may not work because Seatext can't reliably match traffic to your account.
• If you have separate domains (for example, development and production), create a separate Seatext account for each.
• The code must be set to load on each new page; otherwise some pages may not activate.
• Activation requires a real visit. Refreshing and leaving immediately won't link the site.
• Wix free plan does not support custom code, so Seatext cannot be installed there.
• If you change your primary domain in Wix, you must update the Seatext account or create a new one.

Practical scenarios: when to use which approach

Single production site

Create one Seatext account for your live domain. Install the script once. Activate with the refresh process. Then configure agents in the Main AI Hub.

Development and production environments

Create two Seatext accounts: one for the dev domain, one for production. Install the script in each Wix project. Activate each separately. This keeps analytics and AI training data separate.

Agency managing multiple clients

Each client gets their own Seatext account tied to their domain. You can manage them from one login if Seatext supports team access; check with the vendor for current team features.

Temporary staging domains

If you use a temporary Wix staging URL, it may not activate reliably. Use a real custom domain for testing. Dynamic subdomains from Wix (like username.wixsite.com/sitename) can work but are less reliable than a custom domain.

What happens after activation: next steps in the Main AI Hub

Once your website name is visible, open the Main AI Hub in Seatext. Choose the pages where you want AI to work, then click Configuration to set the parameters. For example, you can turn on the Website Translation agent to translate your site into 125 languages, or enable AI CRO Reading Analysis to study how visitors read your copy. The activation step is done; the next step is choosing and tuning your agents.

Available agents include: AI CRO Reading Analysis, AI Split URL Testing, Google Ads Landing Page AI, AI Copy A/B Testing, Ecommerce Product Copy, AI Personalization, Scroll Slowdown, Website Translation (125 languages), Local AI SEO, AI SEO Content Factory, Free Authority Link Builder, ChatGPT Brand Visibility, Visitor Source Rewrites, Free AI Website Chat, Conversion Relay (CAPI), Intent Amplifier, Shielded Buyers & Ad Firewall, Detect VPN Ad Clicks, Bot Protection, and AI Agent Actions (WebMCP). Each agent has its own configuration panel.

Troubleshooting common activation problems

Website name never appears

Check that the script is in the Head section, set to All pages, and loading on each new page. Verify you used a paid Wix plan. Confirm the domain matches the primary URL in your Seatext account. Wait the full 10 minutes before contacting support.

Script installed but no activation after refresh

Ensure you stayed on the page for 40 seconds total across refreshes. Try a different browser or incognito mode to rule out caching. Make sure you're visiting the exact domain registered in Seatext.

Multiple sites showing in one account

This indicates a configuration error. Each account should show only its primary URL. Create separate accounts for each domain.

Frequently asked questions

Do I need a paid Wix plan to use Seatext?

Yes. Wix only allows custom code on paid plans. The free plan doesn't support adding JavaScript snippets.

Why doesn't my site show as connected after one refresh?

One quick load may not give the script enough time. Refresh several times and stay on the page for at least 40 seconds. Then wait five minutes.

Can I test Seatext on localhost?

No. Localhost is blocked for security reasons. Use a valid real domain.

I have two Wix sites. Do I need two Seatext accounts?

Yes. Each Seatext account is linked to a single primary URL. Create a separate account for each site.

What happens after my site name appears in the dashboard?

You can go to the Main AI Hub to activate the AI agents you need and click Configuration to adjust their parameters.

How long does the activation take from start to finish?

Installation takes about 5 minutes. The refresh and dwell step takes about 1 minute. Dashboard confirmation takes up to 5 minutes. Total: roughly 10-15 minutes.

Can I activate Seatext on a Wix site that uses a custom domain?

Yes. A custom domain is ideal. It matches the primary URL requirement and works reliably.

What if I change my Wix site's domain later?

You'll need to update the primary URL in your Seatext account settings or create a new account for the new domain. Check with the vendor for the exact process.

Security and privacy considerations

The Seatext script remains inert until activation. This means no data is collected or processed before you complete the refresh step. The script only begins analyzing visitor behavior and serving AI-driven optimizations after the dashboard shows your site as connected. Localhost and dynamic development domains are blocked to prevent unauthorized use and ensure traffic attribution accuracy. Each account's single-URL design prevents cross-domain data leakage.

Performance impact on your Wix site

The Seatext JavaScript snippet is lightweight and loads asynchronously. It does not block page rendering. Once activated, AI agents run in the browser or via edge workers depending on the agent type. Translation, personalization, and CRO agents operate with minimal latency. The initial activation visit adds no perceptible load time. Ongoing performance depends on which agents you enable; most are designed for zero-flicker operation.

Decision criteria: is Seatext right for your Wix site?

Consider Seatext if you want autonomous AI agents that optimize conversion rates, translate content, personalize copy, or recover ad spend from bot traffic. It fits sites with enough traffic to benefit from automated testing and personalization. If you run Google Ads, the Google Ads Landing Page AI rewrites pages per keyword in real time. If you serve international visitors, the Translation agent covers 125 languages without manual work. If you need to understand how visitors read, the CRO Reading Analysis agent provides telemetry beyond standard analytics. Small sites with very low traffic may not see immediate ROI from testing agents but still benefit from translation and chat.

Why API Key Security Matters for SSR Deployments

Server-side rendering introduces unique credential exposure risks. API keys embedded in SSR HTML payloads can leak to browsers. Keys bundled in client-side JavaScript bundles become publicly readable. Error logs and stack traces may accidentally print secrets. These vectors have caused real breaches across major platforms.

SeaText's standard integration avoids these risks entirely. The platform uses a JavaScript snippet (SEATEXTCODEINTEGRATION) that loads asynchronously from SeaText's servers. No API key travels to the browser. The snippet handles AI rewrites, translations, and optimizations client-side. This model shifts security focus from key management to script integrity and origin control via Content Security Policy.

Enterprise customers with server-side API needs (pre-rendering variants, server-side translation, backend analytics) do receive API keys. Those keys require the same rigorous protection as any production secret. The sections below cover both the standard snippet approach and the enterprise server-side key workflow.

Direct Answer: Standard Integration Uses No API Keys

Standard SeaText client-side SSR integration uses a JavaScript snippet with no API keys, eliminating API key exposure risk. The snippet loads asynchronously from SeaText's domain and performs all AI operations in the browser. For advanced server-side SeaText API use cases (enterprise pre-rendering, server-side translation), follow standard API key security best practices: store keys in environment variables or secret managers (AWS Secrets Manager, Vercel Environment Variables), restrict keys to server-only runtime, and implement regular key rotation.

Client-Side Snippet vs Server-Side API Key: Trade-offs for SSR

Recommendation: Use the client-side snippet for 95% of SSR deployments. Only request enterprise server-side API access if you need pre-rendering at build time or server-side translation for search engine crawlers. Contact SeaText sales to enable enterprise API keys.

Client-Side Snippet Integration (Standard Approach)

How the Snippet Works

SeaText AI provides a JavaScript snippet called SEATEXTCODEINTEGRATION. You embed this snippet in your application's HTML body. The snippet loads asynchronously from SeaText's servers and handles all AI-driven rewrites, translations, and optimizations in the browser. Because no secret key exists, the security model centers on script integrity and origin control (S1).

Adding the Snippet in SSR Frameworks

In a server-side rendered application (Next.js, Nuxt, Astro, Remix), the snippet belongs in the shared layout or document component that wraps every page. This ensures the script loads once per session and persists across route transitions (S1).

Next.js App Router (app/layout.tsx)

export default function RootLayout({ children }: { children: React.ReactNode }) {
  return (
    <html lang="en">
      <body>
        {children}
        <script
          async
          src="https://cdn.seatext.com/seatext.js"
          id="seatext-script"
        ></script>
      </body>
    </html>
  );
}

Place the script near the closing </body> to avoid blocking render. Do not wrap it in 'use client' or client-only boundaries; the snippet must load during initial HTML delivery (S1).

Nuxt 3 (app.vue or app/layout.vue)

<script setup>
useHead({
  script: [
    {
      src: 'https://cdn.seatext.com/seatext.js',
      async: true,
      id: 'seatext-script',
      body: true
    }
  ]
});
</script>

<template>
  <div>
    <NuxtPage />
  </div>
</template>

The body: true option injects the script at the end of <body>. Nuxt 3's useHead composable handles SSR-safe injection.

Astro (src/layouts/Layout.astro)

--- 
const seatextScript = "https://cdn.seatext.com/seatext.js";
---
<html lang="en">
  <head>...</head>
  <body>
    <slot />
    <script src={seatextScript} async id="seatext-script"></script>
  </body>
</html>

Astro islands do not affect this script; it loads once per page view in the base layout.

Content Security Policy Configuration

Since the snippet loads from an external domain, configure your Content Security Policy (CSP) to allow script execution only from that domain. Add the SeaText script origin to your script-src directive. If you use a nonce or hash-based CSP, include the snippet's hash or generate a nonce at render time and apply it to the script tag. This prevents injection of unauthorized scripts even if the SeaText domain were compromised.

Nonce-Based CSP Examples

Next.js App Router (middleware.ts + layout.tsx)

// middleware.ts
import { NextResponse } from 'next/server';
import type { NextRequest } from 'next/server';

const CSP_NONCE_HEADER = 'x-csp-nonce';

export function middleware(request: NextRequest) {
  const nonce = crypto.randomUUID();
  const response = NextResponse.next();
  response.headers.set(CSP_NONCE_HEADER, nonce);
  response.headers.set(
    'Content-Security-Policy',
    `script-src 'self' 'nonce-${nonce}' https://cdn.seatext.com;`
  );
  return response;
}

export const config = { matcher: '/:path*' };

// app/layout.tsx
import { headers } from 'next/headers';

export default function RootLayout({ children }: { children: React.ReactNode }) {
  const headersList = headers();
  const nonce = headersList.get('x-csp-nonce') || '';

  return (
    <html lang="en">
      <body>
        {children}
        <script
          nonce={nonce}
          async
          src="https://cdn.seatext.com/seatext.js"
          id="seatext-script"
        ></script>
      </body>
    </html>
  );
}

Nuxt 3 (nitro.config.ts + plugin)

// nitro.config.ts
export default defineNitroConfig({
  routeRules: {
    '/**': {
      headers: {
        'Content-Security-Policy': "script-src 'self' 'nonce-{{nonce}}' https://cdn.seatext.com;"
      }
    }
  },
  hooks: {
    'render:html'(html, { event }) {
      const nonce = crypto.randomUUID();
      event.node.res.setHeader('Content-Security-Policy', 
        `script-src 'self' 'nonce-${nonce}' https://cdn.seatext.com;`
      );
      html.head.push(`<script nonce="${nonce}" src="https://cdn.seatext.com/seatext.js" async id="seatext-script"></script>`);
    }
  }
});

Astro (astro.config.mjs + middleware)

// astro.config.mjs
export default defineConfig({
  vite: {
    plugins: [
      {
        name: 'csp-nonce',
        transformIndexHtml(html, { server }) {
          if (!server) return html;
          const nonce = crypto.randomUUID();
          const csp = `script-src 'self' 'nonce-${nonce}' https://cdn.seatext.com;`;
          return html
            .replace('<head>', `<head><meta http-equiv="Content-Security-Policy" content="${csp}">`) 
            .replace('<script async src="https://cdn.seatext.com/seatext.js"', 
              `<script nonce="${nonce}" async src="https://cdn.seatext.com/seatext.js"`);
        }
      }
    ]
  }
});

Hash-Based CSP Alternative

If you prefer hashes over nonces, compute the SHA-256 hash of the snippet content and add 'sha256-' to script-src. This works only if the snippet content never changes. SeaText's evergreen endpoint may update, so nonce-based CSP is recommended for production.

Server-Side API Key Security for SSR (Enterprise)

Enterprise customers with server-side API access must protect API keys using industry-standard secret management. The following practices apply to any SSR platform.

Store Keys in Environment Variables or Secret Managers

Never hardcode API keys in source code. Use platform-native secret stores:

• Vercel: Project Settings → Environment Variables → Add SEATEXT_API_KEY for Production, Preview, Development environments separately.
• Netlify: Site Settings → Environment Variables → Add SEATEXT_API_KEY with scope "Functions" or "Build & Functions".
• AWS: Store in AWS Secrets Manager. Retrieve at runtime in Lambda/ECS via SDK. Enable automatic rotation (30-90 days).
• Docker/Kubernetes: Use Kubernetes Secrets mounted as files or environment variables. Consider External Secrets Operator for sync from Vault/ASM.

Restrict Keys to Server-Only Runtime

Ensure API keys never reach the browser:

• In Next.js, use process.env.SEATEXT_API_KEY only in Server Components, Route Handlers (app/api/), or Middleware. Never in Client Components ('use client').
• In Nuxt 3, use useRuntimeConfig() with serverOnly: true in nuxt.config.ts.
• In Astro, access import.meta.env.SEATEXT_API_KEY only in --- frontmatter (server context), never in client scripts.

Implement Regular Key Rotation

Rotate API keys every 90 days or per compliance policy:

1. Generate new key in SeaText enterprise dashboard.
2. Update secret in all environments (Vercel, Netlify, AWS Secrets Manager, Kubernetes).
3. Deploy updated secrets. Verify server-side calls succeed.
4. Revoke old key after confirming zero errors for 24 hours.
5. Automate via CI/CD: script that calls SeaText API to create key, updates secret store, triggers redeploy.

Secret Manager Setup Examples

Vercel Environment Variables (CLI)

# Add key for all environments
vercel env add SEATEXT_API_KEY production
vercel env add SEATEXT_API_KEY preview
vercel env add SEATEXT_API_KEY development

# Rotate: remove old, add new
vercel env rm SEATEXT_API_KEY production
vercel env add SEATEXT_API_KEY production

AWS Secrets Manager (Node.js)

import { SecretsManagerClient, GetSecretValueCommand } from "@aws-sdk/client-secrets-manager";

const client = new SecretsManagerClient({ region: "us-east-1" });

export async function getSeatextKey() {
  const cmd = new GetSecretValueCommand({ SecretId: "prod/seatext/api-key" });
  const resp = await client.send(cmd);
  return JSON.parse(resp.SecretString!).SEATEXT_API_KEY;
}

// Usage in Next.js Route Handler
// app/api/seatext/translate/route.ts
export async function POST(req: Request) {
  const apiKey = await getSeatextKey();
  const body = await req.json();
  const res = await fetch('https://api.seatext.com/v1/translate', {
    method: 'POST',
    headers: { 'Authorization': `Bearer ${apiKey}`, 'Content-Type': 'application/json' },
    body: JSON.stringify(body)
  });
  return new Response(res.body, { status: res.status });
}

Netlify Functions (netlify.toml + function)

# netlify.toml
[functions]
  environment = { SEATEXT_API_KEY = "@seatext-api-key" }

# netlify/functions/seatext-translate.ts
import type { Handler } from "@netlify/functions";

export const handler: Handler = async (event) => {
  const apiKey = process.env.SEATEXT_API_KEY;
  if (!apiKey) return { statusCode: 500, body: "Missing API key" };
  // ... call SeaText API
};

Asynchronous Loading and Performance

The snippet includes the async attribute, so it downloads in parallel without blocking page render. The documentation notes: "Asynchronous Loading: The snippet includes the async attribute for the script tag, ensuring that the SEATEXT AI script loads asynchronously, which helps in maintaining page load performance." (S1) In SSR, this means the initial HTML reaches the browser quickly, and the SeaText enhancements apply after hydration.

Local Storage and Cross-Origin Considerations

The script stores an identifier in the browser's local storage. The documentation advises: "Local Storage Usage: The script stores an ID in the local storage. Ensure that your application has the necessary permissions to access and use local storage." (S1) If your SSR app serves multiple subdomains, verify that the cookie/domain settings allow the SeaText ID to persist across them. The docs also flag: "Cross-Origin Considerations: If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues." (S1)

Verifying the Integration

After deployment, open the site in a browser and open Developer Tools (F12). Check the Console for SeaText initialization messages and the Network tab to confirm the script loads from the official SeaText domain with a 200 status and no CSP violations. The documentation recommends: "Inspect the Page: Open your browser's Developer Tools (F12) and check the Console and Network tab to confirm the script loads from the official SeaText domain with a 200 status and no CSP violations." (S1)

Common Mistakes to Avoid

• Placing the snippet inside a component that re-renders on every route change, causing duplicate injections.
• Omitting the snippet from the SSR shell and only adding it in client-side code, which delays activation for the first paint.
• Forgetting to update CSP when the SeaText script domain changes.
• Assuming an API key exists for standard integration and rotating a non-existent secret.
• Bundling server-side API keys into client-side JavaScript (Next.js Client Components, Nuxt useFetch in se

To set up SeaText AI on Wix for automatic translations, you need a paid Wix plan (required for custom code), a SeaText AI account, and the JavaScript snippet from your SeaText dashboard. Follow the steps below to integrate, activate, and verify the translation agent.

Prerequisites

Before you start, make sure you have these three things ready.

• A paid Wix plan. Free Wix plans cannot add custom code. You need at least a Combo plan or higher.
• A SeaText AI account. Create one at seatext.com if you don't have it. It takes less than a minute.
• The JavaScript snippet. After logging into your SeaText dashboard, go to the integration section. Copy the unique code shown there. This code connects your Wix site to SeaText's AI agents.

Why Automatic Translation Matters for Your Wix Site

Automatic translation opens your Wix site to the entire world. Over 75% of internet users speak a language other than English. If your site is only in English, you miss billions of potential visitors.

Search engines rank translated pages higher in local markets. A French user searching for your product in French will see your site if it has a French version. This boosts your organic traffic significantly.

User experience improves dramatically. Visitors stay longer and buy more when they read in their native language. They trust your brand more. Automatic translation removes the friction of manual language switching.

Without automation, translating a site takes weeks or months. You have to hire translators, manage files, and update every page. With SeaText, the AI does it in real time. No manual work. No delays.

For a Wix site, this is especially important. Wix is popular among small businesses and entrepreneurs. They often lack the budget for professional translation services. SeaText gives them enterprise-level multilingual capability at a fraction of the cost.

SeaText vs Wix Built-in Translation Manager

Wix offers its own translation tool called the Wix Translation Manager. It is a manual or semi-automatic system. SeaText is fully automatic. Here is a comparison to help you decide.

Choose SeaText if you want a hands-off solution that scales instantly. Choose Wix Translation Manager if you prefer manual control and have a small set of languages. For most businesses, SeaText saves time and money.

Step-by-Step Integration Process

1. Log into your Wix account and open the project you want to translate.
2. Go to Settings in your Wix admin area.
3. Scroll down to Custom Code (located at the bottom of the page, under "Advanced").
4. Click Add Code under the "Head" section.
5. Paste the SeaText JavaScript snippet into the text area labeled "Paste the code snippet here:".
6. Under "Add Code to Pages", select All pages from the dropdown.
7. Choose Load code on each new page and click Apply.

Important: The installation is secure. The AI remains inactive until you activate it. Your existing content stays untouched.

If you have multiple Wix sites, repeat the process for each site. Each site needs its own SeaText account and its own snippet. Do not use the same snippet on two different domains.

How the AI Translation Agent Works

The SeaText translation agent is an autonomous AI. It runs on your website after you activate it. Here is how it works step by step.

Detection of page content. The AI scans every page of your Wix site. It identifies text in headings, paragraphs, buttons, links, and images. It also detects dynamic content like product descriptions or blog posts.

Real-time translation. When a visitor selects a language, the AI translates the page on the fly. It uses advanced neural machine translation. The result is natural and accurate. The AI also learns from corrections you make in the dashboard.

Language switching. SeaText adds a language switcher to your site. Visitors can choose any of the 125 languages. The translation is instant. There is no page reload delay. The AI remembers the visitor's choice for future visits.

Automatic updates. If you add new pages or change existing content, the AI detects the changes. It translates the new content immediately. You never have to manually update translations.

SEO integration. The AI adds hreflang tags and creates separate URLs for each language. This helps search engines index your translated pages correctly. Your site ranks in multiple languages without extra effort.

Detailed Use Case: E-Commerce Store with 125 Languages

Imagine you run an online store that sells handmade jewelry. Your site is built on Wix. You currently sell only in English to the US market. You want to expand globally.

With SeaText, you can translate your entire store into 125 languages. That includes product names, descriptions, prices, cart buttons, and checkout pages. Everything is translated automatically.

Here is a realistic scenario. A customer in Japan searches for "handmade earrings" in Japanese. Your site now has a Japanese version. The customer sees the product page in Japanese. They add an item to cart and complete the purchase. The entire experience is in their language.

Without SeaText, you would need to hire a translator for each language. For 125 languages, that would cost tens of thousands of dollars. It would take months. With SeaText, you set it up once and the AI handles the rest.

The results are measurable. Many SeaText users report a 60% increase in international customers. Your store becomes accessible to billions of people. Your revenue grows without increasing your workload.

One challenge with e-commerce is product inventory. The AI translates product variants and options. It also translates error messages and shipping information. Everything a customer sees is in their language.

Verification and Activation

1. Visit or refresh your website several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account.
2. Wait at least 5 minutes. Check your SeaText dashboard. You should see your website name next to the SeaText logo at the top. If it doesn't appear after 10 minutes, contact support.
3. Once connected, the AI will automatically translate your site into 125 languages. You can manage translations and fine-tune in the dashboard.

During activation, keep your browser open. Do not close the tab. The AI needs continuous presence to establish the link. If you have ad blockers, disable them temporarily. They may interfere with the connection.

Key Facts

Common Pitfalls and Troubleshooting Tips

Here are real issues users face and how to solve them.

• Script not loading. The snippet must be placed in the Head section for all pages. If you placed it only on specific pages, translations won't work on others. Double-check the page selection.
• Activation delay. If your site doesn't appear in the dashboard after 10 minutes, clear your browser cache. Then visit your site again and stay for 40 seconds. Sometimes a slow internet connection causes delay.
• Conflicts with other scripts. Some Wix apps add their own JavaScript. If you have a caching plugin or a script that modifies the DOM, it may conflict. Test with a staging site first. Disable other custom code temporarily to identify the issue.
• Dynamic content not translating. SeaText translates content that is present in the HTML when the page loads. If you load content via AJAX after the page loads, it may not be picked up. Contact SeaText support for such cases.
• Language switcher not showing. The AI adds a language switcher by default. If you have a custom theme, it may hide it. Check your theme settings. You can also manually add the switcher using a widget.
• Translations seem incorrect. Use the dashboard to review and edit translations. The AI learns from your corrections. Over time, it improves accuracy.
• Multiple domains. Each domain needs its own SeaText account. Using one account for two domains will cause the translation to fail on one of them.

Limitations and Important Notes

• Multiple domains: If you need SeaText on several websites, create a separate account for each domain. Each account links to a single primary URL.
• Dev domains: Localhost and dynamic development domains are restricted. Use a real domain.
• Activation delay: After installing the code, you must visit the site and wait 40+ seconds. The dashboard may take up to 10 minutes to show your site.
• Only one script per page: Ensure no conflicts with other JavaScript that may interfere.
• Content type limitations: Embedded iframes or external content may not be translated. The AI works on the Wix page content only.

Terminology

• SeaText AI: A platform that deploys autonomous AI agents to optimize websites for conversions, translation, SEO, and more.
• Wix Custom Code: A feature in Wix settings that allows you to add HTML/JavaScript to your site's header or footer.
• Website Translation Agent: One of SeaText's AI agents that translates your entire site into 125 languages without manual work.
• Hreflang tag: An HTML tag that tells search engines which language a page is in. SeaText adds these automatically.

FAQ

Do I need a paid Wix plan to use SeaText?

Yes. Wix requires a paid plan to add custom code. Free plans do not support this.

How many languages can I translate to?

SeaText supports 125 languages, including all major languages and regional dialects.

Can I use SeaText on multiple Wix sites?

Yes, but you need a separate SeaText account for each domain. Each account is tied to one primary URL.

How long does activation take?

After pasting the code, visit your site for at least 40 seconds. The site should appear in your SeaText dashboard within 5–10 minutes.

Will SeaText affect my existing translations?

No. The AI remains inactive until you activate it in the dashboard. Existing content is not altered automatically.

What if I don't see my site in the dashboard after 10 minutes?

Contact SeaText support immediately. There may be an installation issue. Also check that your snippet is not missing any characters.

Does SeaText work with Wix's built-in multilingual features?

Yes, but it is best to use one system. If you already have Wix translations, disable them before activating SeaText to avoid conflicts.

Can I customize translations?

Yes. In the SeaText dashboard, you can review and edit any translation. The AI learns from your edits.

Why the Tilda Free Plan May Block SeaText

SeaText AI translations rely on a JavaScript snippet placed in your site's <head> section. That snippet lets the agent scan and translate every page. Tilda Free may not allow you to edit the global head code. Tilda's help center does not confirm this, but many users report it. Check your plan settings. If you cannot add custom head code, you must upgrade to Tilda Personal ($15/month) or higher. This is a platform limitation, not a SeaText restriction.

Some users try to add the script via a T123 block on a single page. That works for that one page only. But the global head method is the recommended setup. The free plan simply does not support that.

What the SeaText Translation Agent Does

The Translation Agent is an AI tool that scans your website content. It automatically translates every page, headline, button, and offer into up to 125 languages. It works with regional dialects. The agent runs in the cloud and updates translations as your site changes. You can edit any translation from the SeaText dashboard. Edits are saved and will not be overwritten by future auto-translations. The agent is designed to work with any website that can load JavaScript, including Tilda after the plan upgrade.

Why does head-section placement matter? The script must load on every page before the content renders. That ensures the agent sees all text. If you only add the script to one page, the agent cannot translate other pages. The global head code gives a consistent, automatic translation across your entire site.

Prerequisites for Setup

Before you start, you need three things:

• A SeaText account – Create one at seatext.com. The free trial gives you access to the Translation Agent. Check with the vendor for current trial details.
• A Tilda plan of Personal or higher – Upgrade your Tilda billing first. Without this, the script cannot be installed globally. Tilda Free may not allow custom head code.
• A real domain connected to Tilda – Development URLs like localhost are restricted for security reasons. Each Tilda site needs its own SeaText account.

Make sure you have your SeaText dashboard open in one tab and your Tilda dashboard in another. The whole process takes less than 10 minutes.

Step-by-Step Installation on Tilda Personal or Higher

After upgrading your Tilda plan, follow these steps. Each step is based on the SeaText integration guide.

Step 1: Add Languages in SeaText

Log in to your SeaText account. Go to the Translation Agent section. Choose the languages you want. SeaText supports 125 languages. You can select as many as you need. The agent will automatically translate your existing content into those languages.

Step 2: Copy the JavaScript Snippet

In the same dashboard, you will see a JavaScript code snippet. Copy it to your clipboard. This snippet is unique to your account. Do not modify it.

Step 3: Paste the Code into Tilda's Site Settings

Go to your Tilda dashboard. Open the Site Settings (gear icon). Click More, then HTML code for the head section. Paste the SeaText snippet into the field labeled 'Edit code inside HEAD tag'. Save the changes and publish your site. The snippet will now load on every page.

Alternative for a single page: If you only want to test one page, add a T123 block to that page, open the HTML editor, and paste the code there. This is useful for testing but not for a full site translation. Global installation is better for automatic updates on all pages.

Step 4: Activate and Verify

After pasting the code, visit your live website. Refresh the page several times and stay on the page for at least 40 seconds. This activates the AI and links your site to your SeaText account. Wait about five minutes. Then check your SeaText dashboard – your domain name should appear next to the SeaText logo. This confirms the connection is working. The Translation Agent will now start scanning and translating your pages. You can manage translations from the dashboard.

Troubleshooting Common Issues

Here are common setup mistakes and how to fix them.

• Script not loading: Check that you pasted the code in the correct field. Open your site's source code with your browser's developer tools. Look for the SeaText script. If missing, repeat the paste step.
• Domain not appearing in SeaText: Wait at least five minutes after visiting the site. If it still does not show, try visiting the site again and staying longer than 40 seconds. Make sure you are using a real public domain, not a development URL.
• Translations not appearing: The agent needs time to scan pages. Full site translation may take longer depending on the number of pages and languages. Check the dashboard for progress. You can also manually trigger a scan.
• Script conflict with other code: If your site uses custom JavaScript, test the agent on a staging page first. In rare cases, the script may conflict. The SeaText team can help troubleshoot.

Alternatives When You Cannot Upgrade

If you cannot upgrade to Tilda Personal, you have two alternatives:

• Use Tilda's built-in multilingual feature – Tilda offers a bilingual tool (two languages) through Zero Block. It is manual but free on any plan. It does not use AI.
• Use a third-party translation service – Some services like Linguise offer integration with Tilda. That is outside the scope of this article. Check with the vendor for compatibility.

Also, note that SeaText requires a real public domain. If you are using a temporary domain, the agent will not work. You can always upgrade later and move your site to a real domain.

Frequently Asked Questions

How long does it take for translations to appear?

After you paste the code and visit the site, the AI activates within about 40 seconds. Translations start appearing within a few minutes. Full site translation may take longer depending on the number of pages and languages. You can monitor progress in the SeaText dashboard.

Do I need a separate SeaText account for each Tilda site?

Yes. Each SeaText account is linked to a single primary domain. If you have multiple Tilda sites (e.g., a development domain and a production domain), you must create separate accounts for each. This is a security measure to prevent cross-site tracking.

Can I edit the translations?

Yes. The SeaText Translation Agent generates translations automatically, but you can review and edit any translation from the dashboard. This gives you full control over the final output. Edits are saved and will not be overwritten by future auto-translations.

What if I change my Tilda plan back to Free?

If you downgrade to Tilda Free, the custom head code will be removed. The SeaText script will stop working. Your existing translated pages will remain as static HTML until you update them, but new content will not be translated. You would need to upgrade again to restore the service. This is based on general platform behavior, not confirmed by SeaText.

Is there a free trial for SeaText?

SeaText offers a free trial that includes the Translation Agent. Check with the vendor for current trial terms. You can test the full setup on a Tilda Personal plan without paying for SeaText immediately.

Quick answer

Fast scrolling is a conversion killer. When visitors race past your value proposition, pricing, or call to action, they don't convert because they never really saw the offer. The most effective way to stop visitors from scrolling too fast is to install a scroll slowdown agent that automatically detects high-velocity scrolling and gently reduces scroll speed only when the visitor approaches important conversion elements.

What Ad Position Personalization Actually Means

Ad position personalization is the practice of changing where an ad appears on a page based on who the visitor is, where they came from, or what they've done before. For example, a returning customer might see an ad higher on the page, while a first-time visitor sees it lower. The goal is to place the ad where that specific person is most likely to notice and act on it.

Testing this is not the same as testing ad creative. You're not asking "which ad image wins?" You're asking "does moving the ad to a different spot for different people improve results?" That distinction matters because the test design is different.

Step 1: Define Your Personalization Hypothesis

Before you touch any tooling, write down exactly what you expect to happen. A good hypothesis has three parts: the audience segment, the position change, and the expected outcome.

Example: "For visitors who arrive from a Google Ads campaign with high purchase intent, moving the ad from the sidebar to the hero section will increase click-through rate by at least 15%."

Without a specific hypothesis, you'll end up testing random changes and won't know what to do with the results.

Step 2: Choose Your Testing Tool

You have two main options for running the test:

• Client-side testing (Google Optimize, VWO, Optimizely): These tools inject JavaScript to change the page layout. They're easy to set up but can cause a flash of original content (FOUC) if not configured well.
• Server-side testing: The position change happens on the server before the page loads. This is faster and more reliable but requires developer involvement.

For most teams, start with a client-side tool. If you're testing position changes that affect layout significantly, server-side is worth the extra effort because it avoids layout shifts that can skew your data.

Step 3: Set Up the Experiment Structure

Your experiment needs at least two variants:

1. Control: The ad appears in its current, fixed position for everyone.
2. Treatment: The ad position changes based on the personalization rule you defined.

Split traffic evenly between the two. If you have a high-traffic site, you can use a 50/50 split. If traffic is lower, consider a multi-armed bandit approach that allocates more traffic to the better-performing variant over time.

Step 4: Define Your Primary Metric

Pick one metric that matters most. For ad position testing, the most useful primary metric is usually conversion rate — the percentage of visitors who complete the desired action after seeing the ad.

Secondary metrics to track:

• Click-through rate (CTR) on the ad
• Revenue per session
• Bounce rate
• Scroll depth (did people actually see the ad?)

Don't make conversion rate your only metric. If the ad moves higher and gets more clicks but those clicks don't convert, you've just increased your ad spend without increasing revenue.

Step 5: Run the Test for the Right Duration

This is where most tests fail. You need enough data to reach statistical significance, which usually means at least 95% confidence. For a typical B2B site with moderate traffic, that can take 4 to 8 weeks.

Here's a quick rule of thumb: run the test for at least two full business cycles. If your sales cycle is two weeks, run for four weeks. If it's a month, run for two months.

Also, avoid running tests during major holidays or campaign changes. External factors will muddy your results.

Step 6: Analyze the Results

When the test ends, look at your primary metric first. Did the treatment beat the control? Is the difference statistically significant?

Then check the secondary metrics. If conversion rate went up but revenue per session went down, something is off. Maybe the ad position change attracted lower-quality clicks.

Finally, segment the results. Did the personalization work better for one audience segment than another? If you personalized for returning visitors but the lift came from new visitors, your rule needs adjustment.

Step 7: Verify and Iterate

If the treatment wins, don't just roll it out to everyone. Run a validation test to confirm the results hold. Then consider testing a different position or a different personalization rule.

If the treatment loses, that's useful data too. It tells you that your hypothesis was wrong, and you can refine it for the next test.

Common Mistakes to Avoid

• Testing too many variables at once: Change only the ad position, not the ad creative, the page layout, and the headline simultaneously.
• Stopping the test early: If you check results after a week and see a 20% lift, resist the urge to declare victory. The sample size is too small.
• Ignoring mobile vs. desktop: Ad position personalization often behaves differently on mobile. Segment your results by device.
• Not accounting for ad blockers: If a significant portion of your audience blocks ads, your test results may not reflect what they see.

Key Facts at a Glance

When This Testing Approach Doesn't Work

If your site gets fewer than a few hundred visitors per day, traditional A/B testing may not be practical. You'd need months to reach significance, and by then the test results would be outdated.

In that case, consider using AI-powered testing that analyzes reading behavior and micro-interactions rather than just binary conversions. This approach can generate insights from much smaller traffic volumes.

Also, if your ad position is controlled by an ad network (like Google Ads' automated placements), you may not have direct control over position. In that case, you're testing the personalization rules that determine which ad shows, not where it shows.

Frequently Asked Questions

How long should I run an ad position personalization test?

Run it for at least two full business cycles. For most sites, that's 4 to 8 weeks. If you have low traffic, expect longer.

What's the difference between testing ad position and testing ad creative?

Ad position testing changes where the ad appears. Ad creative testing changes what the ad says or looks like. They're separate experiments and should not be run simultaneously.

Can I test ad position personalization without a developer?

Yes, if you use a client-side testing tool like Google Optimize. You'll need to set up the experiment through the tool's visual editor, which doesn't require coding.

What if my test shows no significant difference?

That's a valid result. It means ad position personalization doesn't move the needle for your audience. Focus your testing efforts elsewhere, like on ad copy or landing page content.

Should I personalize ad position for every visitor segment?

No. Start with one or two segments where you have a strong hypothesis. Testing too many segments at once makes it hard to isolate what's working.

How do I know if my ad position change actually caused the lift?

That's what the control group is for. If the treatment group outperforms the control group and the difference is statistically significant, you can attribute the lift to the position change.

The Core of Intent Validation

Why a Structured Test Matters

Seatext is a JavaScript integration for Shopify. The AI stays inert until you activate an agent. This protects your website content (S1). It also means a broken integration can fail silently.

The integration depends on two code changes. First, the JavaScript snippet must be in theme.liquid. Second, the product description must be wrapped with the required data- attribute. The Seatext script uses that attribute to find content it can process (S1).

If the attribute is missing, the script may load but have nothing to act on. Product descriptions will not be optimized. Translation, CRO, SEO, and other agents will not work as expected. A structured test catches this before you activate any agent.

Testing also confirms your domain is linked correctly. Each Seatext account is linked to a single primary URL. If the domain does not match, the script may not associate traffic with your account (S1).

Prerequisites Before You Start Testing

• An active SEATEXT AI account.
• Shopify admin access with permission to edit theme code.
• A valid, real primary domain. Development URLs such as localhost are restricted for security reasons. Dynamic development domains may not function properly because Seatext may not be able to reliably associate traffic with your account (S1).
• A separate Seatext account for each domain. You cannot reuse one account across staging and production (S1).
• The exact JavaScript snippet from your Seatext account.

You do not need to change product copy during testing. You only need the wrapper around the product description output.

Step-by-Step Testing Process

1. Copy the JavaScript code. Log into your SEATEXT AI account and copy the snippet shown in the integration section (S1).
2. Open the theme editor. In Shopify admin, go to Online Store, then Themes. Click Actions, then Edit Code (S1).
3. Edit theme.liquid. In the Layout folder, open theme.liquid. Paste the snippet in the file. Click Save to keep the change (S1).
4. Open the product template. Find the file that renders product descriptions. It is usually product.liquid or product-template.liquid (S1).
5. Wrap the product description. Locate the product description output code. Wrap it with the required data- attribute shown in the integration guide (S1).
6. Save the template. Confirm the file saved without Liquid errors.
7. Preview a product page. Open a product on your live storefront. Confirm the description displays correctly (S1).
8. Inspect the HTML source. Use browser developer tools to confirm the data- attribute is present on the product description element (S1).

Do not skip the preview step. The preview catches layout problems that the source check cannot.

What a Successful Test Looks Like

A successful test has four signals.

• Page renders cleanly. The product description appears where expected. There is no broken layout or missing content.
• The wrapper exists in the DOM. The data- attribute from Step 5 appears in the HTML source (S1).
• The script loads. In the Network tab, reload the page and look for the Seatext JavaScript file. A 200 status means the file was delivered. A 403 or connection error usually means the domain is not authorized in your account.
• The console has no Seatext errors. JavaScript errors can stop the script before it attaches to product descriptions.

Remember that the AI stays inert until activated. Seeing no content changes during testing is normal. The test is about wiring, not copy output (S1).

Common Issues and How to Resolve Them

Script not loading

• Check that the snippet is actually in theme.liquid and saved (S1).
• Confirm the domain in your Seatext account matches your store domain exactly. A mismatch blocks the association (S1).
• Test on a real domain, not localhost or a dynamic development URL (S1).

Data- attribute not appearing

• Confirm you edited the correct template. Some themes render product descriptions from a section or snippet.
• Wrap the description output itself, not the surrounding container.
• Make a minor edit to the theme and save again. This clears a cached version of the template.

Staging and production domains

Use a separate Seatext account for each domain. Each account is linked to one primary URL. If you test on staging with one account and then try to use the same account on production, the script will not associate correctly (S1).

Theme updates

Updating a theme can replace theme.liquid and product templates. Reinstall the snippet, rewrap the description, and run the full test again.

Limitations and Edge Cases

This testing procedure assumes a standard Shopify theme with server-rendered product templates. It applies to the integration method described in the Seatext Shopify guide: adding the snippet to theme.liquid and wrapping the product description output (S1).

• Localhost and local tunnels. Seatext restricts localhost. Local tunnels often create dynamic domains that Seatext may not be able to associate with your account. Use a real domain (S1).
• Separate domains require separate accounts. If you have a development domain and a production domain, create an account for each (S1).
• JavaScript-rendered themes. If your theme builds product descriptions in the browser, the data- attribute must be present in the final DOM by the time Seatext initializes. Inspect the rendered element, not just the Liquid file.
• Headless or subdomain setups. Each primary URL needs its own account. A subdomain counts as a separate domain when it is the primary URL for a storefront (S1).

If your setup falls outside these cases, check with the vendor for the current integration requirements.

Best Practices for Ongoing Verification

• Test after every theme change. Theme updates and new themes overwrite code edits.
• Keep separate accounts per domain. This prevents domain association failures in staging or production (S1).
• Document the wrapper location. Record the file and line number where you added the data- attribute. This makes reinstallation faster.
• Use a clean browser profile. Browser extensions can block third-party scripts and create false failures.
• Run the full checklist before activating agents. The script stays inert until activation. Confirm wiring first, then activate agents like CRO Optimizer, Translation, or Ecommerce Product Copy (S1, S2).
• Recheck after activating an agent. Once an agent is active, confirm it changes the expected content without breaking the page.

Key Facts

Frequently Asked Questions

Can I test on a Shopify development URL?

Use a real domain. Seatext restricts localhost, and dynamic development domains may not work because Seatext may not be able to reliably associate traffic with your account (S1). A preview URL that changes often is risky.

What happens if I forget the data- attribute?

The script loads but cannot identify the product description content. AI agents will not know what to optimize. Product descriptions stay unchanged.

How do I know the AI agents are actually working?

Complete the integration test first. Then activate an agent in your Seatext account. The AI remains inert until activated, so changes appear only after activation (S1). Revisit the page and check the agent output.

Do I need a separate Seatext account for a staging store?

Yes. Each primary URL needs its own account. A staging domain and a production domain are separate domains (S1).

How do I keep the integration after a theme update?

Reapply both code changes. Re-paste the snippet in theme.liquid and re-wrap the product description output. Then rerun the full test.

What should I check if product descriptions disappear?

Inspect the Liquid change you made. An unclosed tag, missing quote, or nested wrapper can break the template output. Revert the wrapper, save, and add it again carefully.

What Is the SeaText AI Data Attribute?

The SeaText AI data attribute is a small HTML snippet you add to your website. It tells the SeaText AI where to find and optimize your content. Without it, the AI cannot read or rewrite product descriptions, headlines, or other text. Testing ensures the attribute is present and working.

Why is this attribute required? SeaText AI agents need a clear signal to know which elements to target. The attribute acts like a marker. It says, "This content is ready for optimization." The AI stays inert until it finds the marker. This keeps your site safe and the AI efficient.

Direct Answer: How to Test the Attribute

Use browser developer tools to inspect elements for the SeaText data attribute. Then confirm detection in the SeaText dashboard. This is the standard two-step process. First, check the HTML. Second, verify the dashboard shows the element.

Prerequisites

Before you test, you need a SeaText AI account and the installation code snippet. If you don't have an account, create one at SeaText. Then copy the JavaScript code from the SEATEXT AI section in your dashboard. Paste it into the theme.liquid file (Shopify) or the equivalent header template for your platform. The installation is secure. The AI remains inert until you activate it.

You also need access to your website's code. For Shopify, this means editing theme files. For custom platforms, you need to edit your site's header or template files. The exact file depends on your setup.

Step 1: Inspect the Element with Browser Developer Tools

Open your website in a browser. Right-click on the element that should have the data attribute (for example, a product description) and select Inspect. This opens the Developer Tools panel.

In the Elements tab, look for the HTML tag that wraps your content. The SeaText attribute is the data attribute shown in your integration snippet. It is not a generic name like data-seatext. Instead, it is the exact attribute name provided in your SeaText account. To find it, go to your SeaText dashboard. Navigate to the integration section. Copy the snippet. The attribute name appears in the HTML code. Common names include data-seatext-ai or similar. Use that exact name when inspecting.

If you see the attribute on the element, the code is installed correctly. If not, double-check the snippet placement. Ensure the attribute is on the correct element. For Shopify, the attribute should be on the product description output. The integration guide shows you how to wrap the description with the data attribute. After saving your changes, refresh the page and inspect again.

Step 2: Verify Script Loading

Before checking the dashboard, confirm the SeaText script is loading. Open the Developer Tools and go to the Network tab. Refresh the page. Look for a request to the SeaText domain (e.g., seatext.com or similar). If you see a JavaScript file loading, the script is active. If not, the snippet may be missing or blocked.

Also check the Console tab for errors. A clean console means no JavaScript errors. If you see errors like "404" or "Failed to load resource," the script URL might be wrong. Double-check the snippet from your dashboard.

Step 3: Check the SeaText Dashboard

Log in to your SeaText account. Navigate to the dashboard for your website. Look for a section that shows detected elements or test events. If the attribute is working, the dashboard will list the page and the element where the attribute was found. You may also see a status indicator like "Active" or "Detected."

If the dashboard shows no data, the attribute might be missing or the script isn't loading. Go back to step 1 and verify the HTML. Also check that the script is loading (step 2). The dashboard updates within a few minutes after the page loads with the attribute. If it doesn't appear, reload the page or check the browser console for errors.

Shopify vs Custom Platforms

For Shopify, the process is straightforward. You edit the theme.liquid file and the product template (product.liquid or similar). The attribute is added to the product description output. The dashboard shows the product page with the detected attribute.

For custom platforms (like WordPress, Squarespace, or headless CMS), the exact file location differs. In WordPress, you can add the snippet to the header.php file or use a plugin. In headless setups, you add the snippet to the main HTML template. The attribute must be on the element you want to optimize. For example, on a product page, the attribute goes on the

To train a custom AI model for keyword adaptation, start with labeled keyword-intent pairs, pick a transformer base model, fine-tune it on your domain data, validate on a held-out set of real search results, then deploy with continuous monitoring. This roadmap works for teams that need a proprietary model tuned to their exact niche, and it keeps the process focused on measurable outcomes.

What keyword adaptation actually means

Keyword adaptation is the practice of changing page content—headlines, offers, CTAs, product blocks—to match the intent behind a specific search query. Instead of serving one generic landing page to every visitor, an adapted page mirrors what the user typed. For example, someone searching "studio downtown" sees a different headline and offer than someone searching "apartment for rent" even if both land on the same URL.

A custom model does this automatically by learning patterns from historical search, click, and conversion data. It predicts which copy variations work best for each query intent.

Step 1: Define the task and collect labeled data

Before you train anything, you need a clear prediction target. The most common tasks are:

• Intent classification: label each keyword as informational, navigational, transactional, or commercial.
• Copy suggestion: generate a headline or CTA for a given keyword.
• Content scoring: predict how well a page variation matches a query.

Your data must include keyword-intent pairs. The minimum viable dataset needs thousands of examples, not hundreds. Use your own search console queries, ad campaign keywords, and landing page performance data. Add labels manually or via a lightweight classifier first.

Labeling examples

Create a spreadsheet with columns: keyword, landing page, headline, CTA, and a label like "match" or "mismatch." You can also use a 1–5 relevance score. The more consistent your labels, the better the model learns.

Step 2: Choose a base model and architecture

You don't start from scratch. Use a pre-trained transformer like BERT, RoBERTa, or a larger generative model such as GPT-J or Llama. For classification tasks, a small encoder model (BERT) works well and is cheap to fine-tune. For generation tasks—like writing new headlines—use a decoder model.

Match the model size to your budget. A 110M-parameter BERT base fine-tunes on a single GPU. A 7B parameter model needs far more compute. Start small and scale only if accuracy demands it.

Step 3: Fine-tune on your domain data

Fine-tuning adjusts the pre-trained weights to your specific keyword patterns. Split your labeled data into training (80%), validation (10%), and test (10%). Use the training set to update the model, and the validation set to pick hyperparameters like learning rate and batch size.

For generation tasks, use a standard language modeling loss. For classification, use cross-entropy. Track loss on the validation set every few hundred steps. Stop when validation loss stops improving to avoid overfitting.

Data augmentation

If your domain has little data, augment with paraphrasing, synonym replacement, or back-translation. This helps the model generalize to unseen keyword variations.

Step 4: Validate on held-out SERP sets

Your test set should reflect real-world search results. Collect live SERP pages for a sample of keywords from your target domain. For each keyword, check whether the model's suggested copy would be relevant to the top-ranking pages. A human reviewer scores each suggestion as good, okay, or poor.

Measure accuracy, precision, recall, or a simple pass rate. For generation, use BLEU or ROUGE as a proxy but always have a human check.

Step 5: Deploy and monitor

Deploy the model as an API endpoint or batch pipeline. Integrate it with your CMS or ad platform. Start with a small percentage of traffic to compare against existing pages. Track click-through rate, conversion rate, and revenue per visitor.

Monitor for drift. Search intent changes over time, so schedule retraining quarterly or after major market shifts. Log all predictions and outcomes to spot when the model starts suggesting irrelevant copy.

Hypothetical scenario

Imagine you run a real estate site in Chicago. You have 50,000 past search queries and conversion data. You fine-tune a BERT model to classify each query as "tour request" or "pricing question." The model learns that "studio downtown" maps to a tour-page CTA, while "rent prices downtown" maps to a pricing-block offer. After deployment, you see a 12% higher conversion on adapted pages. This is the kind of result a custom model can deliver when the data is clean and the task is narrow.

Key facts about keyword adaptation

What a custom model adds beyond pre-built agents

Training your own model gives you full control over data, thresholds, and output style. You can tailor it to niche industry jargon, proprietary product names, and specific brand voice. But it requires ML expertise, ongoing data curation, and compute budget.

Pre-built agents like SeaText handle the same task without the training process. They use domain-agnostic models that already know common intent patterns. Load them, and they start rewriting pages.

Limitations and when to skip custom training

A custom model is overkill if you have fewer than a few thousand labeled examples, no in-house ML team, or a limited budget. It also fails if your data is noisy or your keyword universe changes too fast to keep labels updated.

If your goal is immediate revenue lift from paid traffic, a ready-made keyword adaptation agent often delivers faster. Use custom training only when you need deep differentiation or data control that a SaaS tool cannot offer.

Frequently asked questions

How much data do I need to fine-tune a keyword model?

Aim for at least 5,000 labeled examples for simple classification. Generation tasks need more, often 50,000 or more. Less data means you risk overfitting.

What does training cost?

For a small BERT model, training on a single GPU costs around $50–$300 in cloud compute. Larger generative models range from $500 to $5,000 per fine-tune run. Ongoing inference costs add up per request.

How long does fine-tuning take?

With a small dataset and a single GPU, a few hours. With larger models and data, expect days. Plan for regular retraining cycles.

Can I use a pre-trained model without fine-tuning?

Yes, but performance will be generic. Fine-tuning is how you adapt the model to your brand's keywords, tone, and product semantics.

How do I measure success?

Track conversion rate on adapted versus non-adapted pages. Use A/B testing with same traffic segments. A lift of 5% or more usually justifies the investment.

What if my traffic is mostly organic, not paid?

The same model works for organic landing pages. Adapt headlines and CTAs based on the organic search term, not just the campaign keyword.

Is a custom model worth it for you?

If you have the data, skills, and budget, a custom model gives you a durable competitive edge. If not, use a pre-built agent and reinvest the saved time in other SEO work. Either way, the core principle stays the same: match your page to the searcher's intent.

Learn more about this service

See how this page can help with your next step.

Learn more

How to translate text in images without losing quality

If Seatext AI doesn’t work after a no-code installation, do this first: don’t open the theme code. Check whether the Seatext script tag is actually on the live page, confirm the domain matches your account, activate the agents, and clear your cache. Most no-code failures come from a missing script, a cached page, an account-domain mismatch, or an agent that was never switched on.

Work through the steps below in order. After each step, re-test the page. If the problem goes away, you’re done. If it stays, move to the next step.

Before you start: prerequisites

Before troubleshooting, make sure these four things are true.

• You have a Seatext AI account. The integration guide states: “Before you can install the script, you need a SEATEXT AI account.”
• You copied the JavaScript code from the Seatext dashboard. The same guide says to “Copy the Javascript code from SEATEXT AI which appear in this section below.”
• You are using a real published domain, not localhost. Development URLs are restricted.
• At least one agent is activated. The AI stays inert until you activate it.

Step 1: Confirm the Seatext script is on the live page

Open the page that isn’t working. Right-click and choose “View Page Source.” Search for “seatext” or “SEATEXT.” If you find a script tag, the install is present. If not, the injection method didn’t publish the snippet.

Common mistake: checking only the homepage. If you use a tag manager or an app, the script should appear on every page. Test the exact page that failed.

Verification: if the script is present in the source, move to Step 2. If it’s missing, re-save the script in your site builder, tag manager, or app, then republish and reload.

Step 2: Check your domain match

Check that the domain in your browser matches the domain in your Seatext account. The integration guide says “Each SEATEXT AI account is linked to a single primary URL.” If you’re testing on staging.example.com while your account is set to example.com, the script won’t work.

Also check the www prefix. If your account uses example.com but you’re viewing www.example.com, and the redirect isn’t in place, the domain match may fail. The same applies to http versus https.

Verification: compare the address bar with the account domain. If they match, move to Step 3. If they don’t, either use the exact domain from the account, or create a separate account for the second domain.

Step 3: Activate the agents you need

Installing the script is not the same as turning on the AI. The guide says “the AI remains inert until activated.” If you see no copy changes, no translations, no chat widget, and no personalization, check your dashboard’s agent list.

From the Seatext homepage flow: Step 1 is “Add Seatext to your site in under 1 minute,” Step 2 is “Activate the autonomous agents you need.” If you skipped Step 2, nothing will happen on your site.

Verification: open the Seatext dashboard, switch on the agents you want, and then reload the page. If features appear, the problem was activation.

Step 4: Clear cache and test in a fresh session

Browser cache, CDN cache, or server cache can keep serving an old page without the script. If you added the script but still see the old version, test in an incognito or private window.

Verification: if the page works in incognito but not in your normal window, clear the browser cache and reload. Also clear any site cache or CDN cache if you use one.

Step 5: Look for script conflicts and browser blocks

Some extensions and security settings block third-party scripts. Ad blockers, privacy tools, and content security policies can stop Seatext from loading. If the script is present in the source but the page doesn’t change, open the page in a browser with all extensions disabled, or use a different browser.

Also check for tag manager conflicts. A tag manager can load the script only on certain routes, or it can fail to fire on single-page app navigations. Make sure the trigger is set to all pages.

Step 6: Use browser developer tools to verify

If the page still isn’t working, use browser developer tools.

1. Open Chrome DevTools with F12.
2. Go to the Network tab.
3. Reload the page.
4. Search for “seatext.”

If you see a request to Seatext with a 200 status, the script loaded. If you see a blocked request, read the error. Common messages are net::ERR_BLOCKED_BY_CLIENT, 404, or CORS errors. These tell you whether the block is caused by an extension, a missing file, or a domain policy.

Verification: if the script loads but agents still don’t run, check the Console tab for errors and take a screenshot before contacting support.

What “no-code install” means in this guide

In this guide, “no-code install” means you didn’t edit your theme’s source files directly. You used a method such as a tag manager, an app, a custom code block, or a script injection field. Each method has different failure points:

• Tag manager: the tag may not fire on every page.
• App: the app could be uninstalled or the script tag could be removed.
• Custom code block: a theme update might overwrite it.

If you did edit theme code manually, this diagnostic sequence still helps, but start by checking whether your edit is still in the theme file.

Key facts at a glance

Limitations you should know

This sequence works best for no-code installs on standard web pages. It does not cover every possible issue. Known restrictions from Seatext’s integration guide:

• Development URLs like localhost are restricted for security reasons.
• Dynamic development domains may not function properly because Seatext may not reliably associate traffic with your account.
• Each domain needs its own account. You cannot use one script on two separate primary URLs.

If your site uses a custom firewall, a strict content security policy, or a service worker that strips external scripts, you may need to add the domain to an allowlist. That’s a site-level setting, not something Seatext can change from the dashboard.

Frequently asked questions

Why doesn’t Seatext AI work right after I add the script?

The script can load even when agents are off. Seatext’s integration guide says the AI remains inert until activated. Clear your cache and confirm that the agent you want is switched on.

How do I know if the Seatext script is loading?

Open the page source and search for “seatext,” or use the browser’s Network tab and reload. A 200 response means the script loaded.

Can I test Seatext on localhost?

No. Development URLs such as localhost are restricted. Use a valid, real domain for testing.

Do I need a separate account for a staging domain?

Yes. Each account is linked to a single primary URL. If you need Seatext on a staging domain and a production domain, create one account for each.

What if my site uses a tag manager?

Check that the tag fires on all pages, not only the homepage. Also verify that the tag isn’t blocked by a privacy setting or a route-based trigger.

When should I contact support?

After you’ve confirmed the script is in the page source, the domain matches, agents are active, and the browser console shows no errors. If the problem still exists, contact Seatext support with the console log.

When Seatext and another tool both modify the same page, the usual cause of trouble is not a broken AI model. It is two tools editing the same element at the same time, and one silently overwriting the other. To troubleshoot, map which tool owns each part of the page, set a clear order of operations, and use version history to see what changed and when. Most conflicts can be fixed in under an hour without disabling either tool.

Start with the page that broke. Whether the symptom is a scrappy layout, a headline that keeps reverting, or a CTA that shows the wrong variant, the fix follows the same path. Identify what each tool did, decide who owns each element, then re-run the tools in a controlled order.

Set up a clean baseline before you troubleshoot

Do not guess on a live page. Take a snapshot first.

• Copy the page text, headline, CTAs, and product blocks into a document.
• Record the current date and the last-known-good version.
• Note which campaigns or keywords target this page. Seatext rewrites content based on keyword and visitor intent, so the page may legitimately look different per visitor.
• Turn off one tool for a short test window. This isolates the cause.

You also need access to both tool dashboards. Most conflicts are invisible in the browser; they only appear in the change logs. So before touching anything, confirm you can see the edit history for the affected page in each tool.

Seatext keeps content versions you can review, so start there. The other tool usually has its own revision list. Compare the two lists side by side.

Step-by-step troubleshooting process

Work through these steps in order. Each step narrows the cause.

1. Reproduce the conflict. Open the page as a fresh visitor and note exactly what is wrong. Screenshot it. If the damage only appears for specific traffic, record the source (Google Ads, Meta, referral, email).
2. Pull change history from both tools. In Seatext, check the content versions for the page. In the other tool, open its revision or audit log. You want timestamps.
3. Compare the timelines. If tool B saved a change two minutes after tool A, that is your smoking gun. One overwrote the other.
4. Identify the overlap. Look at which elements both tools touch. Common overlap points are the headline, the CTA, the hero text, and the title tag.
5. Decide ownership. Assign each element to exactly one tool. If both need to update the headline, set a rule: one tool owns it, and the other skips it.
6. Sequence the tools. Run the primary tool first, let it finish, then run the secondary tool. Never let both fire on the same request.
7. Test on a draft or a small group of pages. Seatext lets you start with a small set of keywords or campaigns. Use that to validate before going wide.
8. Verify on the live page. After both tools run once, reload the page and confirm the content is stable for 24–48 hours.

One common mistake is skipping step 1 and editing live. If the conflict has no reproduction case, you cannot prove a fix worked.

Check Seatext's content versions and change history

Seatext tracks content versions for each page it modifies. This is your first troubleshooting tool. Open the page in the Seatext dashboard, find the version list, and read the latest entry. It tells you when the AI last rewrote the page and what it changed.

The agents that modify content do specific jobs. The Google Ads landing page agent rewrites headlines, offers, product blocks, and CTAs to match that visitor's intent. The translation agent rewrites localized copy. A CRO agent tests variants and promotes winners. Each of these writes to a defined set of elements. Knowing which agent touched the page tells you exactly which section to inspect.

If the other tool has its own version list, compare the timestamps. A clean workflow looks like this: Seatext rewrites at 10:00, the other tool applies its edit at 10:05, and nothing touches the page again. A broken workflow looks like this: both tools write at 10:00, and the page flickers between two versions.

Common conflict scenarios and how to fix them

Two tools rewrite the same headline

This is the most common case. One tool optimizes for conversion, the other for SEO or personalization. The fix is ownership: decide which tool owns the headline and block the other one via its settings. If you cannot block per-element, stagger schedules so the secondary tool runs after the primary one has finished.

One tool edits content, the other edits metadata

Here the page itself is fine, but the search snippet changes. Check the title tag, meta description, and canonical. If two tools write metadata, the loser gets overwritten. Assign metadata to one tool and body content to the other.

An A/B testing tool runs while Seatext rewrites the base page

A/B tools clone the page and swap variants. If Seatext rewrites the base page mid-test, every variant can break. Fix: run the test on a frozen copy, or pause the A/B tool, let Seatext rewrite, then start fresh variants.

Translation conflicts

If you translate pages with Seatext and also use another translation plugin, the two can fight over the same localized strings. Pick one tool per language and keep the other's language map disabled for those URLs.

Rules for keeping two content tools in the same workspace

You do not have to remove one tool. You need rules.

• One owner per element. Write it down so both teams follow it.
• Stagger the schedules. Let the primary tool finish before the secondary one starts.
• Use staging. Run both tools on a draft before publishing.
• Start small. Activate Seatext on a small set of pages, confirm stability, then expand.
• Keep a change log. Even a simple spreadsheet beats guessing later.
• Review versions weekly. A conflict that shows up in audit logs is cheaper than a broken live page.

Enterprise controls matter here. Seatext can be deployed safely across campaigns, sites, and regions, which means you can define scope per area and keep other tools from colliding.

Key facts

Limitations: when these steps do not help

These steps assume both tools expose change history. Some page builders and plugins do not. If you cannot see what changed, you cannot compare.

The steps also assume the tools run at different moments. If both tools inject JavaScript that modifies the same DOM node in the same millisecond, you may see flicker or broken layout. In that case, disable one tool's script on that page rather than trying to sequence it.

Finally, this advice does not cover server-side render conflicts. If a caching layer serves a stale version, or your CMS re-generates the page, version logs may look fine while the live page is wrong. Clear the cache after every edit and verify the raw HTML.

FAQ

Why does my other tool keep overwriting Seatext's changes?

It probably runs later in the same request or on the same element. Give the element one owner, and make the secondary tool skip it.

How can I see exactly what Seatext changed on my page?

Open the Seatext dashboard for that page and review the content versions. Compare them with the other tool's revision log.

Can I pause Seatext while another tool runs?

Yes. You can deactivate Seatext for a page or campaign, run the other tool, then reactivate. Starting with a small set of keywords or campaigns is the recommended test path.

Which tool should run first?

The one that owns the broadest element set. Usually that is the SEO or content tool. The second tool should then only touch elements it owns.

Will Seatext break my A/B test?

Only if it rewrites the test variants. Freeze the variant copy, or pause the A/B tool while Seatext rewrites the base page, then restart the test.

Does a conflict hurt my SEO?

Yes, if the meta tags or content flicker. Search engines may see two versions and pick the weaker one. Fix ownership and verify the live HTML after each change.

SeaText AI errors on WordPress usually aren't AI errors at all. They are installation, activation, or account-link problems. The fastest fix is to run a diagnostic sequence: check the account, confirm the JavaScript code, trigger activation, and then look for conflicts.

SeaText's own integration guide gives you the same order. You need a SeaText account, you copy the JavaScript code, you install it on your pages, and then you activate it by visiting the site. If any one of those steps is incomplete, the AI appears to be broken even though the software is fine.

Start with the symptoms

Before changing anything, write down what you actually see. Different symptoms point to different causes.

• Your website name never appears next to the SeaText logo in the dashboard. This usually means the script isn't installed, the account isn't linked to the right domain, or the site hasn't been activated yet.
• The script is installed but nothing changes on the page. Check for caching, a blocked script, or an activation step that was skipped.
• The AI works on one domain but not another. SeaText links each account to a single primary URL, so you need a separate account for each domain.
• You see a JavaScript error in the browser console. This points to the snippet being blocked, duplicated, or placed in the wrong location.
• Agents don't show as active after you click Activate. The dashboard check may be waiting for the site name to connect first.

How SeaText is supposed to be installed

SeaText is a JavaScript integration, not a classic WordPress plugin you activate in Plugins. You copy a script and paste it into your pages, usually through a code-insertion plugin or directly in your theme. The official guide says to copy the JavaScript code provided by SeaText and apply it across all your pages.

For WPEngine users, SeaText recommends downloading the WP Engine plugin that lets you add custom JavaScript code. Install that, then apply the code sitewide.

This mental model matters because many "SeaText errors" are really misplaced code or a missed activation step.

Run the diagnostic sequence in this order

Do these checks one at a time. Stop when you find the cause, then test again after you fix it.

1. Check the SeaText account and domain. Log in to SeaText and confirm which URL is attached to the account. Each account is linked to a single primary URL. If you're testing on localhost or a dynamic development domain, stop—those are restricted and may never connect.
2. Confirm the JavaScript code is present on your live pages. View the page source or use a browser's developer tools to search for "seatext" or the code snippet. Also check that every page includes it, not just the homepage.
3. Trigger activation. Visit your website several times and refresh. Stay on the page for at least 40 seconds. This signals SeaText that the site is live and links it to your account.
4. Wait for the dashboard to connect. Wait at least five minutes for your website name to appear next to the SeaText logo at the top of the dashboard page. If it doesn't appear after 10 minutes, contact SeaText support immediately.
5. Rule out caching and plugin conflicts. Clear your site cache and browser cache, then temporarily deactivate other plugins while you test. If the problem disappears, reactivate plugins one by one.

Check your SeaText account and domain

SeaText accounts are tied to one primary URL. That's a deliberate design, not a bug. If you need to use SeaText on multiple domains, such as a development domain and a production domain, you must create a separate account for each domain.

Development URLs like localhost are restricted for security reasons. Use a valid, real domain. Dynamic development domains may also fail because SeaText can't reliably associate traffic with your account.

To check this: log into SeaText, look at the account header, and confirm the domain listed matches the site you're testing. If it doesn't, create a new account for the correct domain and reinstall the script.

Confirm the JavaScript code is installed correctly

Copy the exact code SeaText gives you. Don't edit it, minify it, or wrap it in a conditional rule until you know it works.

Install the code on every page. If you're using WPEngine, use their custom JavaScript plugin and apply it across all pages. If you're using a WordPress code-insertion plugin, make sure it's enabled globally.

How to verify:

• Open your site's source code in a browser.
• Search for the SeaText script identifier or the account-specific code.
• Confirm it appears on more than one URL, not just the homepage.
• Make sure it appears only once. Duplicate snippets can cause unexpected behavior.

Activate the AI and wait for the connection

Installing the script isn't enough. SeaText says the AI remains inert until activated. Activation happens when a visitor (or you) visits the site and stays there.

The official instruction: visit or refresh your website several times and stay on your page for at least 40 seconds. This activates the AI and links it to your account.

Then wait. Give SeaText at least five minutes. Your website name should appear next to the SeaText logo at the top of the page in the dashboard. If it appears, your connection is ready. If it doesn't appear after 10 minutes, the guide says to contact support immediately because this could indicate an installation issue on your platform.

Rule out caching, plugin conflicts, and other site issues

If the script is present and activation should have happened, the problem may be interference.

• Page caching: A cached copy of your page may not include the script, or it may include an old version. Clear your site cache and browser cache, then repeat the activation visit.
• Security plugins: Some security or script-blocking plugins can prevent JavaScript from loading. Temporarily deactivate them.
• Theme conflicts: Switch to a default WordPress theme as a test. If the script loads, your theme may be stripping or moving the code.
• Other AI or optimization plugins: Deactivate all other plugins, then reactivate them one by one. Standard WordPress troubleshooting works for SeaText errors too.

Key facts at a glance

Limitations: when this guide doesn't apply

This guide covers the standard SeaText JavaScript integration. It doesn't cover cases where you've significantly modified the script, placed it inside a single-page app that loads routes asynchronously, or used a proxy that rewrites your HTML. In those situations, start by restoring the original code and test on a clean page.

It also doesn't apply to using SeaText on localhost or dynamic development domains. Those setups are restricted, so the normal diagnostic steps won't help. Move to a real domain and create the correct account.

Frequently asked questions

Why doesn't my website name show up in the SeaText dashboard?

Most likely the script isn't installed on all pages, the account is linked to a different domain, or activation hasn't been triggered. Visit the site several times, stay for at least 40 seconds, then wait five minutes. If it still doesn't appear after 10 minutes, contact SeaText support.

Can I test SeaText on a staging or localhost site?

No. Development URLs such as localhost are restricted for security reasons. Dynamic development domains may also fail. Use a real domain and create a separate SeaText account for it.

Do I need a different SeaText account for each website?

Yes. Each SeaText account is linked to a single primary URL. For multiple websites or multiple domains, create one account for each.

A security plugin says it blocked a script. What now?

Temporarily deactivate the security plugin, then test the page. If SeaText works while it's off, add an allowlist for the SeaText script rather than leaving the plugin off permanently.

What should I do after I've tried all these steps and nothing fixed the error?

Return to the SeaText integration guide and re-check each step. If the website name still isn't visible after 10 minutes, the official guide tells you to contact the support team immediately—they can see whether the installation is correct on your platform.

Learn more about this service

See how this page can help with your next step.

Learn more

How to troubleshoot SeaText integration on Tilda free