Add the SeaText snippet manually if you want a straightforward, documented setup. A Shopify app can be easier, but only if it injects the SeaText JavaScript correctly. Since SeaText publishes exact steps for theme.liquid, manual is the safer default. This article compares both paths and gives you a simple decision framework.

Why the install method matters

The SeaText snippet is the foundation of the whole setup. If it does not load, SeaText cannot watch visitor behavior, rewrite copy, translate pages, or detect bots. The choice between manual and app changes how easily you can verify that the snippet is actually running.

The bigger risk is a silent failure. The snippet may be placed on a page that never loads, or an app may inject it incorrectly without showing an error. That is why this choice matters.

How the SeaText snippet works on Shopify

On Shopify, theme.liquid is the main layout file. It wraps every page in the store, so a JavaScript snippet placed there runs across the whole site. The SeaText guide tells you to open that file and paste the code.

For product descriptions, the guide asks you to find the product template, usually product.liquid or product-template.liquid, and wrap the description output with a data- attribute. That attribute helps SeaText identify the content it can optimize.

The guide also says the installation process is secure and the AI remains inert until activated. Adding the code does not change your store until you activate agents.

Manual installation: what the official guide says

SeaText publishes an official Shopify integration guide with these steps:

1. Create a SEATEXT AI account. The guide says you need one before you can install the script.
2. Copy the JavaScript code from the SEATEXT AI dashboard.
3. In Shopify admin, go to Online Store, then Themes.
4. Next to your active theme, click the three dots and choose Edit code.
5. In the Layout folder, open theme.liquid.
6. Paste the snippet and click Save.
7. For product descriptions, find the product template and wrap the description output with the data- attribute described in the guide.
8. Preview a product page and use browser developer tools to verify the attribute is present.

This is a direct, transparent process. You know exactly where the code lives, and you do not depend on a third-party app to load it.

Using a Shopify app to inject SeaText: what to check

An app can make installation easier if it injects the SeaText snippet for you. But the source material here does not list an official SeaText Shopify app. That does not prove one does not exist. It means you should verify an app before trusting it.

Ask these questions:

• Does the app explicitly support SeaText?
• Where does it place the JavaScript? Does it use theme.liquid or an app block?
• Will the snippet survive theme updates?
• What happens if you delete the app? Does the snippet stay or disappear?
• Can you see the snippet in your store’s HTML after installation?

If you cannot get clear answers, treat the app as unverified and check with the vendor. Manual installation has less mystery.

Manual vs app: a simple decision framework

Use this flow when you are still deciding:

• Can you follow a copy-and-paste list? If yes, manual is straightforward.
• Do you already use a script-manager app that supports SeaText? If yes, an app may be fine.
• Is your theme heavily customised? Manual helps because you see the exact file and line.
• Will the store owner avoid code at all costs? An app could help, but only after you confirm SeaText support.
• Need a reversible setup? Save a backup of theme.liquid before you edit. Manual is easy to reverse.
• Want to install in under a minute? SeaText says the first step can take under a minute once you know where to paste.

Who should choose manual

Choose manual if you want a documented setup and a simple way to troubleshoot. Manual is also a good choice if you can spend five minutes in the theme editor, if you want to avoid adding another app to your store, or if you need to know exactly where the snippet lives.

Manual also makes it easier to confirm the snippet is present when you inspect the page. You can open your store’s HTML, search for the SeaText code, and know immediately that the install worked.

Who should choose an app (and who should be careful)

Choose an app if you prefer a point-and-click workflow and do not want to touch theme code, if you have already confirmed the app supports SeaText and places the snippet correctly, or if you use several script-injection tools and want them managed in one place.

Be careful if the app does not mention SeaText, if it only injects code into some pages and might miss product pages, or if it is new and has not documented how it works with Shopify themes. In those cases, manual is the safer path.

Common mistakes when adding SeaText to Shopify

• Pasting the code into the wrong template, such as a header file instead of theme.liquid.
• Forgetting to save after pasting.
• Skipping the product-template step and then wondering why product copy is not optimized.
• Using a development URL like localhost. The guide says development URLs are restricted.
• Trying to use one account for multiple domains. Each account links to one primary URL.
• Not checking the site after a theme update. A new theme may not include the snippet.

Key facts from the SeaText integration guide

Limitations and when this advice does not apply

This comparison assumes a standard Shopify theme with theme.liquid. If your theme is locked, or you use Shopify Headless, or your site is built on another platform, the manual steps may differ.

App-specific advice only applies when the app is installed and maintained. Follow the app’s own documentation for placement and updates.

Do not install the snippet twice. If an app and a manual edit both add SeaText, you can end up with duplicate scripts. Choose one path and test the live page.

Frequently asked questions

Does SeaText have an official Shopify app?

The source material we reviewed does not mention one. Manual installation steps are published. Check the current SeaText dashboard or support to see if a new app is available.

Why should I add the snippet manually if apps are easier?

Manual setup is transparent. You know the snippet is in theme.liquid because you put it there. With an app, you depend on the app’s behavior, which you may not be able to inspect.

Where exactly should I paste the SeaText snippet?

The guide says to open Layout/theme.liquid and paste the JavaScript snippet. For product descriptions, you also need to modify the product template.

Will SeaText work if I add the snippet with an app?

It can work if the app injects the same JavaScript correctly on the right pages. Verify the snippet appears in the page source after installation. If you cannot verify it, check with the app vendor.

Can I use the same SeaText account on multiple Shopify stores?

No. SeaText’s guide says each account is linked to a single primary URL and that you need a separate account for each website.

What should I do after a theme update?

Open your live page and check that the SeaText snippet is still present. If it is missing, re-add it from the integration guide or through your app.

How the sync works

Seatext does not push files to Tilda's CMS or modify Tilda's stored content. Instead, a lightweight JavaScript snippet runs in the visitor's browser. When the page loads, the script reads the DOM, sends the text content to Seatext's translation engine, receives the translated strings for the visitor's language, and swaps the visible text on the fly. The dashboard stores your approved translations; the script fetches the latest version each session. This means every page load uses the most current translations without any manual deployment. The script also detects the visitor's browser language setting and automatically serves the correct translation. If no translation exists for a language, the original text remains. This real-time approach keeps your Tilda site unchanged in the backend.

Two ways to install the snippet

Global installation (recommended)

1. Open your Tilda dashboard and go to Site Settings.
2. Click More → HTML code for the head section → Edit code.
3. Paste the JavaScript code from Seatext into the field labeled 'Edit code inside HEAD tag'.
4. Save and publish the site.

This method places the script on every page automatically. It is the simplest way to ensure all current and future pages are translated. Use this if you want consistent translation across your entire site.

Per-page installation

1. Navigate to the specific page you want to translate.
2. Click the "+" icon to add a new block.
3. Choose T123 from the block library (under "Other").
4. Click Content on the block to open the HTML editor.
5. Paste the Seatext snippet and click Save and Close.
6. Publish the page.

Use this approach when you only need translation on a subset of pages or cannot access global site settings. For example, a landing page campaign may need translation while the rest of the site stays in one language. The per-page method gives you control over which pages show translated content. However, new pages will not automatically get the snippet. You must add it manually for each new page.

Activation and verification

After publishing, the script remains inert until activated. Visit or refresh your website several times and stay on the page for at least 40 seconds. This triggers the initial handshake between the script and Seatext's servers. Then wait at least five minutes until your website name appears next to the Seatext logo at the top of the Seatext dashboard. That confirmation means the site is connected and ready to serve translations. The delay exists because Seatext needs to verify the script is running on a live, public domain. It also registers your site in their system. If you skip the 40-second visit, the script may not activate. Always check the dashboard after the wait. If the site name does not appear, repeat the process.

Multi-domain and account structure

Each Seatext account is linked to a single primary URL. If you run a development domain and a production domain, you must create separate accounts for each. Localhost and dynamic development domains are restricted for security reasons; use a valid, real domain. To use Seatext on several distinct websites, create one account per website. This also applies to subdomains. For example, blog.example.com is a different domain from example.com. You would need two accounts. This structure ensures accurate traffic attribution and translation management. Plan your domains before installation. If you later change your domain, you will need a new account.

Why client-side translation matters

Client-side translation means your Tilda site remains untouched. You do not need to duplicate pages or manage language versions in the CMS. This saves time and reduces risk. You can update translations in the Seatext dashboard and see changes instantly on the live site. There is no need to republish Tilda pages. For SEO, search engines that execute JavaScript (like Google) can index translated content. However, you may need to add hreflang tags for full multilingual SEO. The client-side approach also works well with Tilda's block-based editor. You can continue editing your site without affecting translations. The script automatically picks up new or changed text and sends it for translation on the next page load.

Key facts

Limitations and requirements

• JavaScript dependency: Translations only render when the script executes. Visitors with JavaScript disabled will see the original language.
• No CMS write-back: Translated strings are not saved back into Tilda's editor. Edits made in Tilda after translation may require re-translation.
• Activation delay: The 5-minute wait after first visits is mandatory before the dashboard shows the site as connected.
• Single-domain accounts: You cannot manage multiple domains from one Seatext account.
• Security restrictions: Localhost and ephemeral preview URLs will not work.
• Performance impact: The script adds a small load time because it fetches translations and modifies the DOM. This is usually negligible but may affect users on slow connections.
• Caching: If you use a caching plugin or CDN, the script may not run on cached pages. Ensure the script is not blocked by caching rules.

Common issues and troubleshooting

Translations not appearing

• Confirm the snippet is in the HEAD (global) or T123 block (per-page) and the site is published.
• Verify you completed the 40-second visit and 5-minute wait.
• Check the browser console for script errors (ad blockers or CSP policies may block the script).
• Ensure the script is not being blocked by a Content Security Policy. If so, whitelist the Seatext script domain.

Stale translations

• Clear browser cache or open in incognito; the script fetches the latest dashboard version on each load.
• Ensure you clicked Save in the Seatext dashboard after editing translations.
• If you use a CDN, the old script may be cached. Purge the CDN cache.

Site not showing in dashboard

• Revisit the live site, stay 40+ seconds, wait another 5 minutes.
• Confirm the domain matches the primary URL registered in your Seatext account.
• Check that the site is accessible from the internet. Localhost or private servers will not work.

Script conflicts

• Other JavaScript on the page may interfere with the Seatext script. Try disabling other scripts temporarily to isolate the issue.
• Ensure the script is placed in the correct location (HEAD or T123 block).

Frequently asked questions

Does Seatext modify my Tilda project files?

No. The integration is entirely client-side. Your Tilda pages remain in the original language; translations are applied in the visitor's browser via JavaScript.

Can I translate only specific pages?

Yes. Use the per-page T123 block method instead of the global HEAD installation.

What happens if I edit text in Tilda after translations are live?

New or changed text will be sent for translation on the next page view. Previously approved translations for unchanged segments continue to serve from the dashboard.

How do I update a translation?

Edit the translation in the Seatext dashboard and save. The next time any visitor loads the page, the script pulls the updated string.

Will this affect my site's SEO?

Search engines that execute JavaScript (like Google) can index translated content. For full multilingual SEO, consider adding hreflang tags and language-specific URLs, which are outside Seatext's automatic scope.

Can I use one Seatext account for a staging and a production domain?

No. Each domain requires its own Seatext account because each account is tied to a single primary URL.

What if my site uses a Content Security Policy (CSP)?

You must allow the Seatext script domain in your CSP script-src directive, otherwise the browser will block the snippet and translations will not load.

Can I use Seatext on a subdomain?

Yes, but a subdomain like blog.example.com is treated as a separate domain. You need a separate account for each subdomain.

How long does it take for translation changes to appear?

Changes appear on the next page load after saving in the dashboard. No additional delay. But if the page is cached, the old version may serve until the cache expires.

Best practices for managing translations

Keep your dashboard organized. Use clear language labels for each translation. Review translations before publishing. Test on a staging site if possible. Monitor the dashboard for activation status. If you add new pages, ensure the snippet is included (global installation avoids this step). Regularly check for script updates from Seatext. Update the snippet if needed. Do not modify the snippet code yourself. It may break the integration. Use the browser console to verify the script is running. On each page load, you should see network requests to Seatext's servers. This confirms the sync is working.

If a website still won’t connect after 10 minutes of waiting, don’t just keep refreshing. Start with the most common causes: your internet connection, DNS settings, firewall rules, and the website’s server. If you installed a tool such as SEATEXT, the 10-minute mark has a second meaning: the site should show as connected within five minutes, and if it hasn’t after 10, the installation likely didn’t activate.

What “Doesn’t Connect After 10 Minutes” Really Means

A 10-minute wait usually means the browser has been sitting on a loading message or a timeout error. By this point, the connection is not just slow; it is blocked or unreachable. There are three common situations:

• You are trying to visit someone else’s website, and the server is down or not responding.
• You are the site owner, and the domain or hosting is configured incorrectly.
• You installed a script such as SEATEXT, and the activation step never completed.

Ignoring the problem can cost you time, visitors, and, if it is your own website, confidence from search engines and ad platforms. A site that never connects is the same as a closed store.

Before You Start: Prerequisites

You need a few things before you begin:

• Access to the router and modem if you need to restart them.
• Admin access to your computer to change DNS or firewall settings.
• If the site is yours, login access to the hosting or script installation page.
• If you installed SEATEXT, a SEATEXT account and the ability to visit your website in a normal browser.

Step-by-Step Troubleshooting Order

Work through these steps in order. After each step, try the site again. Stop when it connects.

1. Restart your router and modem. Leave them off for 30 seconds, then power them back on.
2. Visit another website on the same device. If other sites load, your internet connection is fine.
3. Try a different device and a different network. This tells you whether the block is on one computer or on the network.
4. Clear your browser cache and disable browser extensions. Extensions can silently block scripts and connections.
5. Flush your DNS cache. On Windows, run ipconfig /flushdns. On a Mac, run sudo killall -HUP mDNSResponder.
6. Turn off VPN, proxy, and firewall rules temporarily to test whether they are blocking the connection.
7. Check whether the website is down for everyone using a third-party down detector. If it is only down for you, the fault is on your side.
8. If the site is yours, log into the server and check web server logs, error logs, and disk space. A full disk can prevent connections.

Why DNS and Firewall Blocking Look the Same

When a website doesn’t connect, the browser gives you little information. A DNS failure means your computer cannot convert the domain name into an IP address. A firewall block also stops the request, often with the same timeout message.

To separate them, open a command prompt and run ping example.com. If you get a reply, DNS and basic connectivity work. Then try curl -I https://example.com. If ping works but curl fails, the problem may be a firewall blocking port 443 or a server issue.

For your own website, run these checks from another device or network too. That helps you tell whether the server is reachable from the public internet or only from your local network.

If You Installed SEATEXT: The Activation Checklist

If the connection problem appeared right after you added the SEATEXT script, follow the official activation rules. The script stays inactive until you activate it, and you need a SEATEXT account before you can copy the script.

1. Check that you are using a real, public domain. SEATEXT restricts localhost and dynamic development domains.
2. Visit or refresh your website several times.
3. Stay on the page for at least 40 seconds. This activates the AI and links it to your account.
4. Wait at least five minutes for your website name to appear next to the SEATEXT logo at the top of the SEATEXT page.
5. If it does not appear after 10 minutes, contact SEATEXT support immediately. This could indicate an installation problem on your platform.

Do not use one account for two domains. Each SEATEXT account is linked to a single primary URL. Use separate accounts for a development domain and a production domain.

Key Facts: The 10-Minute Rule for SEATEXT

Common Mistakes That Look Like a Connection Problem

• Restarting only the browser while a firewall rule is still active.
• Creating one SEATEXT account for two domains. The second domain will not connect to the account.
• Waiting longer than 10 minutes before contacting support. The official guidance says to act at that point.
• Clearing DNS but not the browser cache. Both can hold stale data.
• Using a development URL like localhost when the script requires a real domain.

Limitations and When This Advice Does Not Apply

This guide is for connection problems caused by your network, your device, or an installation that didn’t activate. It does not cover server outages for major sites, DDoS attacks, or hosting provider failures. In those cases, no troubleshooting on your end will help.

If you are on a corporate network, IT policies may block certain sites or ports. Contact your IT team before changing firewall settings. Also, if you are using SEATEXT on localhost or a dynamic development domain, the integration may not function because the AI cannot reliably associate traffic with your account.

Terms You Might See in Connection Errors

DNS — the phone book that turns a domain name into an IP address. If it fails, the browser cannot find the server.

Timeout — the server did not answer within a set time. After 10 minutes, you are past any normal timeout.

Activation — the first successful visit that links the installed script to your account. For SEATEXT, this requires a 40-second stay.

Primary URL — the single domain tied to a SEATEXT account.

Frequently Asked Questions

Why does a 10-minute wait mean the problem is not temporary?

Normal connection attempts either succeed or fail within a minute. If a site still hasn’t connected after 10 minutes, something is actively blocking the request or the server is unreachable.

Should I wait longer than 10 minutes?

No. If you installed SEATEXT, the official instruction says to contact support if the website name does not appear after 10 minutes. Waiting longer usually makes no difference.

Can I use localhost to test a SEATEXT installation?

No. SEATEXT restricts localhost and dynamic development domains for security reasons. Use a valid, real domain.

Do I need a separate SEATEXT account for each website?

Yes. Each SEATEXT account is linked to a single primary URL. If you need to use SEATEXT on multiple domains, create one account per domain.

What should I do after I fix the connection?

Refresh the site, complete the activation visit if needed, and wait at least five minutes to confirm the website name appears before moving to the next step.

What if the site connects on my phone but not on my computer?

The issue is likely on your computer, such as a browser extension, DNS setting, firewall rule, or cached page. Work through steps 4 through 6 of the troubleshooting order.

What does a SEATEXT plan cost?

The source material shows a pricing link but not a fixed price. Check with the vendor for current pricing.

The SeaText AI integration code connects your site to SeaText’s AI services, enabling chatbots, analytics, content generation, and real‑time copy optimization.

Definition

SeaText provides a small JavaScript snippet – the integration code – that you embed on every page you want to power with AI. Until the script runs, the AI stays inert, protecting your existing content. The code is a lightweight file that does not slow down your page load. It only activates after you complete the setup steps.

How It Works

The script stays inert until a visitor loads a page. Then it contacts SeaText’s servers. It identifies the account linked to the domain. Next, it activates the appropriate AI agents. The agents can rewrite copy, translate text, or trigger a chatbot based on the visitor’s intent.

To start the process, you must visit your website for at least 40 seconds. This triggers the activation handshake. Then wait five minutes. After that, the SeaText logo appears at the top of the page. Your website name appears next to it. This confirms a successful connection. If you do not see it after 10 minutes, contact support.

After the logo appears, you must enable agents in the Main AI Hub. Go to the dashboard. Click on “Configuration” to adjust parameters. You can activate agents like the Google Ads Landing Page Agent or the Translation Agent. Each agent has its own settings.

Each domain needs its own SeaText account. If you use a development domain and a production domain, you must create separate accounts. SeaText blocks development URLs like localhost for security. Dynamic development domains may not work reliably. The system cannot associate traffic with your account properly.

Key Features

• Instant personalization: Landing pages adapt to the exact keyword that brought the visitor. SeaText reads the campaign, keyword, and visitor intent behind each paid click. It then rewrites headlines, offers, product blocks, and CTAs.
• Multilingual reach: Built‑in translation to 125 languages. The agent translates every page, headline, button, and offer. Visitors in new markets can read and buy in their language.
• Conversion boost: Autonomous agents rewrite headlines, offers, and CTAs in real time. They test changes and keep what sells more. The CRO Optimizer agent is active by default.
• Bot refund reporting: The Bot Protection Agent detects suspicious paid traffic. It separates real buyers from bots. It creates evidence your team can use for Google, Meta, TikTok, and Reddit refund workflows. You can get up to 20% back from bot clicks.
• A/B testing: The AI A/B Testing Agent generates variants and scales the winners. It tests headlines, offers, and CTAs. It gives every visitor a better reason to convert.
• Security: The script does not alter content until you activate it in the SeaText dashboard.

Feature Deep Dive

125‑Language Translation: The Website Translation Agent translates your pages into 125 languages. You retain control. You can review and edit translations in the “Variants Edit” panel. Select the URL and language you wish to edit. This avoids manual localization projects.

Google Ads Keyword Matching: The moment someone clicks a Google ad, SeaText sees the keyword. It rewrites the landing page to match that search. It adapts headlines, offers, product blocks, and CTAs. The page feels built for that search. This boosts conversion rates by up to 35%.

Bot Refund Reporting: The Bot Protection Agent detects invalid clicks. It saves a record of every suspicious session. It turns that evidence into a refund-ready report. Your team can submit it to Google, Meta, TikTok, or Reddit. This recovers wasted ad spend.

A/B Testing: The AI A/B Testing Agent generates multiple variants of headlines, offers, and CTAs. It tests them automatically. It scales the winning versions. This improves conversion rates over time.

Setup Steps

1. Create a SeaText AI account (or log in if you already have one).
2. Copy the JavaScript code provided in the General Integration section.
3. Paste the code into the <head> of every page, or use the WP Engine plugin for WordPress sites.
4. Visit your site for at least 40 seconds to trigger the activation handshake.
5. Wait five minutes for the SeaText logo to appear at the top of the page, confirming a successful connection.
6. Go to the Main AI Hub to activate the agents you need.

Common Mistakes & How to Avoid Them

• Using a development URL (e.g., localhost): SeaText blocks these for security. Use a real domain for each environment.
• Skipping the activation wait: The AI remains inert until the five‑minute verification period passes. You must visit the page for 40 seconds and then wait.
• Sharing one account across multiple domains: Each domain needs its own SeaText account. This includes development and production domains.
• Not checking for the logo: The logo confirms the connection. Without it, the agents will not activate.
• Forgetting to enable agents: The code itself does not create agents. You must enable them in the Main AI Hub.

Limitations

The integration code does not automatically create AI agents. You must enable them in the SeaText dashboard. Dynamic development domains may not reliably associate traffic. The script does not run on pages that block third‑party JavaScript (e.g., some AMP pages or strict CSP environments). The code remains inert until the five‑minute verification completes. You cannot use a single account for multiple domains. Each domain requires its own account. If you use a staging site, it must have a real, publicly reachable domain. The code does not work on localhost or other development URLs.

Expert Perspective

From a practitioner’s viewpoint, the integration code is a lightweight JavaScript snippet. It does not change your site’s content until you activate agents in the dashboard. Common mistakes include forgetting to wait for the logo confirmation, using development URLs, and not creating separate accounts for multiple domains. The expected timeline: after adding the code, you should see the SeaText logo within 5–10 minutes. To evaluate if agents are working, check the Main AI Hub for status. Look for rewritten headlines or translated content on your pages. The code cannot create agents automatically; you must enable them. It also does not work on pages that block third‑party JavaScript. The code is safe and does not affect your site’s performance. It is designed to be inert until you purposely activate it. If you do not see any changes after 10 minutes, contact support. The code integrates with the WP Engine plugin for WordPress sites, making it easy to add site‑wide.

Key Facts

FAQ

• What does the integration code actually do? It loads the SeaText JavaScript, which contacts SeaText’s cloud, authenticates your domain, and enables AI agents to act on page content.
• Do I need to edit the code for each page? No. One copy placed site‑wide powers every page that includes it.
• Can I test on a staging site? Only if the staging site has a real, publicly reachable domain and its own SeaText account.
• Is there a cost to add the code? Adding the snippet is free; you pay for the AI agents you activate (see pricing on the SeaText homepage).
• How long does it take for the code to work? You must visit the page for 40 seconds, then wait 5 minutes for the logo. After that, agents can be enabled.
• What if I don’t see the logo after 10 minutes? Contact SeaText support immediately. This could indicate an installation issue.
• Can I use the same account for multiple domains? No. Each domain needs its own SeaText account. This includes development and production domains.
• Does the code work on localhost? No. Development URLs are blocked for security. Use a real domain.
• How do I enable agents after adding the code? Go to the Main AI Hub in your SeaText dashboard. Click on “Configuration” to adjust the AI parameters. Then click “Activate” for each agent you want.
• What kind of content can the agents change? They can rewrite headlines, offers, product descriptions, CTAs, and translate entire pages. They can also trigger chatbots and slow down scrollers.

If you stay on the page, SEATEXT AI activation takes about 40 seconds. The official instruction is to visit or refresh your website several times and stay on the page for at least 40 seconds. That stay links the JavaScript script to your account.

After the 40-second check, give the dashboard up to five minutes to show your website name next to the SEATEXT logo. If the name still is not there after 10 minutes, Seatext says to contact support.

This guide is for the Seatext website AI script. It is not about phone, SIM, or eSIM activation.

What counts as activation?

Activation here means that the JavaScript code on your site can talk to your SEATEXT AI account. The code is installed before activation, but the AI stays inert until the system connects it to your account.

You do not need to finish activation in one exact second. The vendor's rule is simple. Stay on the page for at least 40 seconds while visiting or refreshing the site several times. That gives the script a clear signal to link traffic to your account.

Activation is not the same as turning on the AI agents. The 40-second step only links the script. You still need to open the Main AI Hub and switch on the agents you want.

What you need before you start

Before the 40-second timer matters, the script has to be on your site. The General Integration page lists a few hard requirements.

• A SEATEXT AI account. You need an account before installing the script.
• The JavaScript code. Copy it from the Seatext General Integration page.
• A real domain. Development URLs like localhost are restricted, and dynamic development domains may not work reliably.
• One account per domain. If you use SEATEXT AI on multiple websites, create a separate account for each.
• A WPEngine plugin if you use WPEngine. This lets you add custom JavaScript code to your pages and apply it across all pages.

Each account is tied to a single primary URL. That is why the guide says to create one account per website. It also explains why localhost will not work. The system needs a real domain to associate traffic with your account.

The activation process: step by step

The full flow has three phases. Install the script. Stay on the page for 40 seconds. Then check the dashboard.

1. Create your account. Without an account, you cannot install the script.
2. Copy the JavaScript code from the General Integration page.
3. Add the code to your pages. If you use WPEngine, use the WPEngine plugin and apply it across all pages.
4. Visit or refresh your website several times. Keep the final page open.
5. Stay on the page for at least 40 seconds.
6. Wait at least five minutes. Check for your website name next to the SEATEXT logo at the top of the dashboard.
7. If the name does not appear after 10 minutes, contact support. This could indicate an installation problem.
8. Move to the Main AI Hub. Activate the AI agents you need, then click Configuration to adjust the AI parameters.

The homepage frames the install step as taking under one minute. The 40-second stay is the activation step. The five-minute wait is the verification step. Each step has its own clock.

Why the 40-second stay matters

Seatext describes the script as secure and says the AI remains inert until activated. The 40-second stay is the part where the script is linked to your account.

If you ignore it, the system may never connect your website, and you cannot move forward to the Main AI Hub. So the 40 seconds is not a decoration. It is a required part of setup.

The stay also gives the script time to register several visits. The guide says to visit or refresh several times. A single quick visit may not produce enough signal. Several visits plus a 40-second window give the system a clear pattern to match.

Verify that activation worked

The main verification step is visual. Your website name should appear next to the SEATEXT logo at the top of the page.

• Wait at least five minutes after the 40-second stay.
• If the name appears, your website is connected and you can proceed to the next step.
• If the name does not appear after 10 minutes, contact support immediately.

Do not skip the dashboard check. Repeating the 40-second visit will not help if the script was never installed correctly. The dashboard name is the only signal that the link worked.

If the name shows up, you can move to the Main AI Hub. There you activate the agents you need and open Configuration to adjust parameters. Optional edits to translations and copy variants happen in Variants Edit.

Common activation mistakes and fixes

Most activation problems come from skipping one of the steps above. Here are the patterns Seatext flags in its own guide.

• Leaving before 40 seconds. The script may not link. Repeat the visit or refresh and stay the full time.
• Opening the page once and closing it. The guide says to visit or refresh several times.
• Using localhost. Development URLs such as localhost are restricted for security reasons. Use a valid real domain.
• Using one account for two domains. Each account is linked to a single primary URL. Create separate accounts.
• Adding the code but not checking the dashboard. Wait five minutes, confirm your website name, and escalate after 10 minutes if needed.
• Skipping the Main AI Hub. The 40-second step links the site. You still need to activate the AI agents you want.

If you hit the 10-minute mark with no name in the dashboard, the issue is almost always on the install side. The script may not be on every page, or it may be blocked by a caching layer. Support can look at your account and confirm.

What happens after activation

Once the dashboard shows your website name, the script is linked. The next phase is turning on the AI agents you want.

• Main AI Hub. This is where you activate the agents on your preferred pages.
• Configuration. Open this to adjust AI parameters for each agent.
• Variants Edit. Use this panel to review, create, or manually edit translations and copy variants.

Seatext lists more than 20 agents on its site. Examples include the Google Ads Landing Page Agent, the Website Translation Agent, the Bot Protection Agent, and the AI CRO Reading Analysis Agent. You do not need to turn on all of them. Pick the ones that match your goals.

The 40-second step does not switch on any agent. It only links the script. If you skip the Main AI Hub, nothing will change on your site even though the dashboard shows your name.

Key facts at a glance

A few terms you will see during setup

• Primary URL – The single domain tied to your SEATEXT AI account.
• Main AI Hub – Where you activate the AI agents you need on your preferred pages.
• Configuration – The place to adjust AI parameters.
• Variants Edit – The panel where you can review, create, or manually edit translations and copy variants.

Limitations and when this guide does not apply

• This is not about phone, SIM, or eSIM activation.
• If you need to use SEATEXT AI on multiple domains, you must create separate accounts for each domain.
• Dynamic development domains may not function properly because SEATEXT AI may not reliably associate traffic with your account.
• If you use WPEngine, you need the WPEngine plugin to add custom JavaScript to your pages.
• Treat 40 seconds as the minimum. You still need the five-minute dashboard check to confirm the connection.
• The AI remains inert until activated, so the 40-second stay alone does not switch on agents.

Frequently asked questions

What if I leave the page before 40 seconds?

Repeat the process. Visit or refresh the site again, stay for a full 40 seconds, then wait for the dashboard check.

Do I need to click anything during the 40 seconds?

No. The instruction is to keep your page open. After the dashboard confirms the connection, use the Main AI Hub to choose and activate agents.

Can I activate using localhost?

No. Development URLs such as localhost are restricted for security reasons. Use a valid real domain.

What if my website name does not appear after five minutes?

Wait until the 10-minute mark. If it still has not appeared, contact Seatext support immediately.

Do I need a separate account for each website?

Yes. Each SEATEXT AI account is linked to a single primary URL, so create one account per website or domain.

Is the 40-second step the end of setup?

No. It links the script to your account. You still need to go to the Main AI Hub, activate the agents you need, and adjust parameters under Configuration. Optional edits to variants and translations happen in Variants Edit.

Does a slow internet connection change the 40-second rule?

The 40-second rule is a minimum stay on the page. A slow connection can delay the dashboard update, which is why the guide gives a five-minute window before checking and a 10-minute window before contacting support.

Can I activate more than one agent at the same time?

Yes. Once the script is linked, you can switch on multiple agents in the Main AI Hub. Each agent has its own settings under Configuration.

SeaText's documentation is explicit: each account is tied to one primary URL. If you want to use SeaText on more than one domain — whether it's a production site, a staging environment, or a completely different brand — you need a separate account for each. There is no multi-site dashboard or domain aliasing that lets you manage several websites from a single login.

Takeaway: The platform architecture makes the decision for you. Separate accounts are not a best practice — they are a technical requirement.

Why SeaText Enforces One Account Per Domain

SeaText's AI agents — CRO optimizer, Google Ads matcher, bot‑protection, translation, and others — rely on binding a visitor session to a single, known domain. The JavaScript snippet sends events tagged with the account's primary URL. If two domains shared an account, the system could not tell which domain a conversion, bot click, or reading‑telemetry event came from. That would break:

• Keyword‑aware headline rewrites for Google Ads
• Bot‑detection evidence tied to a specific ad account
• Per‑variant A/B test results
• Language‑specific translation caches

The documentation also notes that localhost and dynamic development domains are blocked for security reasons. Even a staging subdomain (e.g., staging.example.com) counts as a separate domain and needs its own account.

What "Separate Account" Means in Practice

Creating a new SeaText account takes about a minute:

1. Go to seatext.com and sign up with a unique email (or use the agency's email with a +tag).
2. Enter the exact primary URL of the new website (e.g., https://shop.example.com).
3. Copy the JavaScript snippet shown in the onboarding screen.
4. Paste it into the site's theme.liquid (Shopify) or the global <head> of other platforms.
5. Save and verify the data-seatext attribute appears in the page source.

Each account has its own dashboard, agent toggles, and billing page. There is no master dashboard that aggregates across accounts.

Common Scenarios and How to Handle Them

Agency managing 10 client sites

Create 10 accounts — one per client domain. Use a consistent naming convention (e.g., agency+clientname@domain.com) so you can filter login emails. Hand each client their own credentials when the engagement ends.

Single brand with production + staging

Two accounts: one for https://brand.com, one for https://staging.brand.com. Treat staging as a separate "website" for SeaText purposes.

Multiple languages on subdirectories (e.g., /en/, /de/)

One account works because it's a single domain. The Translation Agent handles 125 languages from that one account.

Multiple brands on subdomains (e.g., shop.brand.com, blog.brand.com)

Each subdomain is a distinct primary URL. You need a separate account for each subdomain.

Limitations and Exceptions

• No cross‑domain reporting. You cannot roll up conversion lift or bot‑refund totals across accounts in SeaText. Export CSVs from each dashboard and combine in a spreadsheet if you need a portfolio view.
• No shared agent settings. If you tune the CRO agent's aggressiveness on one site, you must repeat the change in every other account.
• Email uniqueness. Each account requires a unique email address. Use plus‑addressing (user+site1@gmail.com) or a catch‑all domain to manage many logins.
• Development domains. localhost, 127.0.0.1, and ephemeral preview URLs (e.g., Netlify deploy previews) are blocked. Use a real, stable staging domain.

Key Facts (from SeaText Documentation)

Terminology

• Primary URL — the exact domain (including subdomain) you register when creating a SeaText account. All AI agents scope their work to this URL.
• JavaScript snippet — the small <script> block you paste into every page of the site. It loads the SeaText runtime and tags events with the account ID.
• Reading telemetry — millisecond‑level scroll, dwell, and re‑read signals the CRO agent uses to generate copy variants.
• Bot‑protection evidence — session fingerprints and behavioral flags SeaText compiles into refund‑ready reports for Google, Meta, TikTok, Reddit.

FAQ

Can I use one SeaText account for a main domain and its subdomains?

No. Each subdomain (e.g., shop.example.com, blog.example.com) is treated as a separate primary URL and requires its own account.

What happens if I paste the same snippet on two domains?

Events from the second domain will be attributed to the first domain's account, corrupting A/B tests, personalization, and bot‑refund reports. The dashboard will show mixed, unreliable data.

Do I pay twice if I have two accounts?

Yes. Pricing is per account. Each account has its own plan tier, usage limits, and invoice.

Can an agency get a master invoice for all client accounts?

SeaText does not currently offer consolidated billing across accounts. Each account is billed separately. Agencies typically pass through the individual invoices or manage each client's payment method directly.

Is there a way to share agent configurations across accounts?

Not automatically. You must configure each agent (CRO, Google Ads, Translation, etc.) in every account. Document your preferred settings and apply them manually when spinning up a new site.

What if I only have a staging environment on a dynamic preview URL?

Dynamic preview URLs (Netlify, Vercel, Cloudflare Pages deploy previews) are not supported. Provision a stable staging subdomain (e.g., staging.example.com) and create a dedicated SeaText account for it.

Can I transfer a domain from one account to another?

The documentation does not describe a transfer flow. The practical approach: cancel the old account, create a new account with the same domain, and reinstall the snippet.

Testing SeaText AI on a staging version of your site lets you verify that Elementor or Divi layouts stay intact and that translations are accurate before you commit to a live rollout.

Why a Compatibility Test Matters

Elementor and Divi generate dynamic HTML and custom CSS. An AI translation layer that rewrites text on the fly can sometimes break those structures. A quick test catches layout glitches, missing strings, or performance hits early, saving time and money.

How SeaText Translation Works on the Front End

SeaText is a WordPress-native translation engine. It detects each visitor’s language and translates the page instantly. The source pack confirms that SeaText sees new posts, products, pages, and updates, then keeps them translated in the background.

That matters for Elementor and Divi because both builders render much of the page through shortcodes, widgets, and dynamic data. SeaText rewrites the visible text strings while the underlying layout structure stays in place. Your job during a staging test is to confirm that the rewritten strings still fit the design.

SeaText supports 125 languages with no page caps and no language caps. A free tier is available, and the activation process takes about one minute. You can also edit translations with a built-in editor, so automatic output is not locked in.

What Elementor and Divi Compatibility Depends On

Elementor and Divi both rely on custom CSS and widget markup. A translation layer can affect compatibility in a few areas:

• Headings, buttons, and labels must keep their font size and spacing.
• Accordions, tabs, sliders, and forms must still open and submit.
• Custom CSS from themes or third-party add-ons may target English text lengths.
• Dynamic content such as product prices, dates, or user names must remain intact.

SeaText’s own source material says it is built for WordPress and the tools you already use. That does not mean every third-party add-on is automatically safe. Verify widget behavior on representative Elementor and Divi pages instead of assuming compatibility.

Set Up a Staging Environment

• Create a copy of your live site on a subdomain or local server.
• Use the same WordPress version and the same Elementor or Divi version.
• Clone your active theme and any custom CSS.
• Disable caching plugins temporarily so you can see raw translation output.

A staging clone is the safest place to test because errors there do not affect real visitors. If your host offers a one-click staging tool, use it. Otherwise copy the files and database manually.

Install SeaText and Enable Sample Pages

• From the WordPress dashboard, go to Plugins → Add New and search for “SeaText”.
• Install and activate the plugin. Activation takes about a minute.
• Enter your SeaText API key. A free tier key is available in your SeaText account.
• Pick 3–5 representative pages: home, product, blog post, landing page, and a page with forms or dynamic widgets.
• In SeaText settings, enable automatic translation for those pages and select a test language such as Spanish.

SeaText will detect the page content and translate it instantly. For a deeper check, enable two languages with different text lengths, such as German and Spanish. Longer words often reveal spacing or wrapping issues.

Readiness Checklist: Pass or Fail Criteria

If every row passes, you are ready to move toward a live rollout. If any row fails, fix the specific issue before enabling SeaText sitewide.

How to Interpret Your Staging Test Results

One layout glitch does not mean SeaText is the wrong tool. First identify whether the issue comes from SeaText, Elementor, Divi, or a third-party add-on.

• If only one page breaks, check that page’s widgets and custom CSS.
• If all pages break, review global theme settings or shared CSS.
• If a form fails, test the form plugin separately with SeaText disabled.
• If only long translations overflow, adjust container widths or font sizes.

Use the SeaText manual edit mode for any string that reads poorly. The source pack says automatic does not mean uncontrolled: you can edit translations, preserve brand voice, and review key pages. That control is part of the compatibility test, not an afterthought.

Also compare the translated page against the original in a side-by-side view. Check the same widget, button, and heading in both languages. That process reveals missing strings or text that the translator skipped.

Performance and Caching Considerations

SeaText rewrites page text in real time for each visitor. That means your server must deliver the translated response fast enough for a good user experience.

• Test with caching plugins disabled first.
• Then enable your regular caching setup and repeat the checks.
• Watch for cached pages that show the wrong language.
• Use a CDN or server-level cache if response times increase.

Slow load times are a common reason teams hesitate before enabling translation sitewide. A staging test helps you measure the real impact before going live.

Limitations and Troubleshooting

SeaText translates text strings. Images with embedded text are not auto-translated. If your Elementor or Divi site uses image-based headlines, promotional banners, or infographics, plan to replace them with real text layers or translated images manually.

Custom CSS and third-party add-ons may also need manual review. For example, a testimonial slider that pulls text from a plugin might render fine in English but lose styling after translation. Test those widgets explicitly and use the SeaText editor to correct any strings that the automated system cannot handle.

Another limit is terminology. Niche industries like legal, medical, or engineering have specific terms. The free tier gives you basic translation, but you may need manual edits for brand names, product names, or regulated claims. SeaText’s built-in editor is the tool for that work.

If a translated page looks broken, you can disable translation for that page, fix the Elementor or Divi settings, then re-enable. That workflow keeps your live site safe while you resolve the issue.

Rollback and Go-Live Plan

Before enabling SeaText on your live site, write a rollback plan.

• Record which SeaText settings you changed on staging.
• Export a list of test pages and translations you edited.
• Know how to deactivate the plugin and clear caches.
• Pick a low-traffic time for the go-live.

On go-live day, enable SeaText on a small group of pages first. Re-run the readiness checklist. Then expand to all pages. Keep caching on, but monitor performance for the first 48 hours.

If something fails, deactivate SeaText, clear caches, and restore the previous page states. The staging test should have prepared you for this, but a written rollback plan makes the decision faster.

SEO and Multilingual URLs

SeaText’s source material says it provides free automatic multilingual SEO for every translated page. That means translated pages can be indexed by search engines and bring in international traffic. But you should verify how URLs, hreflang tags, and sitemaps behave during staging.

• Check that translated pages have their own URL structure.
• Look for hreflang annotations in the page source.
• Confirm the XML sitemap includes translated pages.
• Check that meta titles and descriptions are translated or manually reviewed.

If your site already has a multilingual plugin or manual translation setup, test SeaText alongside it carefully. Duplicate translations can confuse search engines and visitors.

Definition and Scope

SeaText AI is a WordPress-native translation engine. It automatically detects a visitor’s language and rewrites page text in real time. The source pack confirms support for 125 languages, no page caps, no language caps, and a built-in editor for manual translation control.

This guide focuses on Elementor and Divi compatibility. The same staging approach can be adapted for other WordPress page builders.

Key Facts

FAQ

• Do I need a paid plan to test on staging? No. The free tier lets you translate unlimited pages and languages on a test site.
• Will SeaText break my Elementor widgets? It usually does not, but always verify dynamic widgets after activation. Test accordions, sliders, and forms explicitly.
• How many languages can I enable at once? Up to 125 languages are supported; you can enable any subset for testing.
• Can I edit a translation after SeaText creates it? Yes. SeaText provides an editor where you can fine-tune any string.
• What happens to existing translations when I update a page? SeaText keeps new posts, products, and updates translated automatically. Re-check edited strings on staging after publishing changes.
• Does SeaText change URLs or SEO metadata? SeaText provides automatic multilingual SEO for translated pages. Verify URLs, hreflang, and sitemaps in your staging test.
• Can I use the free tier on a staging subdomain? Yes. Activate the plugin on the staging subdomain with your free API key and run the same checks as on the live site.
• What metrics show compatibility success? Layout integrity, widget behavior, load time, translation accuracy, and dynamic content functionality are the key pass/fail metrics.
• How do I remove SeaText if the test fails? Deactivate and delete the plugin from the WordPress dashboard, then clear any caches. Your staging site is isolated, so no live content is affected.
• What if I see layout issues? Disable translation for the affected page, adjust the Elementor or Divi settings, then re-enable. Use the SeaText editor for any remaining string-level fixes.
• Is there a cost to move from staging to live? The free tier remains free; you only pay if you upgrade for premium features such as advanced A/B testing.

Translating a WordPress site for free can save money, but it often leads to common mistakes that break functionality and hurt SEO. The most frequent errors are forgetting to set the site language, not translating SEO meta tags, and ignoring right-to-left (RTL) support. Other pitfalls include using machine translation without review, breaking layout due to text expansion, and neglecting navigation menus and plugin strings. These mistakes can make your site look unprofessional and reduce traffic from international visitors. Understanding why each mistake happens and how to fix it helps you build a multilingual site that works well.

Mistake 1: Forgetting to Set the Site Language

When you add a new language, many free plugins require you to set the site language in WordPress settings. If you skip this, the language switcher may not work, and translations won't load. Why does this matter? WordPress uses the site language for date formats, locale-specific behavior, and even some plugin logic. For example, if you add a Spanish translation but keep the site language as English, your Spanish pages might show English dates and currency formats. To fix this, go to Settings > General and choose the correct language for each version. Some plugins like Polylang let you set a language per post, but the overall site language still affects the admin interface. Always set the site language to match the primary language of your content.

Mistake 2: Not Translating SEO Meta Tags

Free translation often focuses on visible content but ignores SEO meta titles, descriptions, and alt text. This means search engines see the same meta tags for all languages, hurting your ranking in each language. Why does it matter? Without translated meta tags, your page might rank for the wrong keywords or not rank at all in the target language. For example, an English page with Spanish content will have an English title tag, so Google shows it only to English speakers. Mechanics: Most free plugins like TranslatePress allow manual translation of meta tags in the editor, but you have to do it for each page. Decision criteria: If you have many pages, consider a paid solution that automates this. For small sites, manually adding translated meta tags is manageable. (Note: Some free plugins do not support meta translation at all, so check first.)

Mistake 3: Ignoring Right-to-Left (RTL) Support

Languages like Arabic and Hebrew need RTL layout. If your theme doesn't support RTL, text will overflow or misalign. Why does this matter? Visitors from RTL languages will see a broken layout, making your site unusable. Mechanics: RTL support requires CSS rules that flip the direction of text, margins, and floats. Most modern themes include RTL stylesheets, but many free themes do not. You can check by looking for an rtl.css file in your theme folder. If missing, you can add custom CSS to fix alignment. Some free translation plugins like Polylang do not adjust layout, so you must handle it yourself. For a quick test, install a language like Arabic and see if your menus and text boxes display correctly. If not, add CSS like 'body { direction: rtl; }' and adjust accordingly.

Mistake 4: Using Machine Translation Without Review

Free machine translation (like Google Translate) can produce awkward or incorrect phrases. For a professional site, you need a human review. Why does this matter? Machine translation lacks context and brand voice. A phrase like "sign up" might be translated literally, sounding unnatural. Practical scenario: If you run an ecommerce site, a mistranslated "add to cart" button could confuse customers and reduce sales. Mechanics: Even with good AI, always proofread key pages. SEATEXT allows you to edit translations after automatic generation, so you can keep brand voice. Decision criteria: If you have limited budget, use machine translation for initial drafts but budget for a human review of important pages. For blogs, you might accept lower quality, but for product pages, review is essential.

Mistake 5: Breaking Layout Due to Text Expansion

Translated text is often longer than the original. A button that says “Sign Up” in English might become “Iscriviti” (short) or “Inscríbete” (longer) in Spanish. If your design has fixed widths, text can overflow. Why does this matter? Overflowing text breaks your design, hiding buttons or overlapping other elements. Mechanics: Use flexible containers with min-width and max-width, avoid fixed widths, and test each language. Practical scenario: A navigation menu with fixed-width items might stack or wrap oddly in longer languages. To fix, use CSS word-break or overflow properties. Also, test with the longest expected translation. Some free plugins like TranslatePress show a preview, but you should also check the live site.

Mistake 6: Not Handling Navigation Menus and Plugin Strings

Free translation plugins may not translate menu items automatically. You need to create separate menus for each language or use a plugin that syncs them. Similarly, many plugins and themes have their own text strings (like "Add to Cart" or "Read More") that are not part of your content. Why does this matter? If visitors see original language in navigation or buttons, they may feel the site is not fully translated and lose trust. Mechanics: For navigation, in Polylang you can create language-specific menus. For string translations, use Loco Translate to translate theme and plugin strings. Some free plugins like TranslatePress allow you to translate strings in the visual editor, but it's manual. Decision criteria: If you use many plugins, choose a translation solution that automatically handles string translations. For small sites with few plugins, manual translation of strings is doable.

How to Build a Free Translation Strategy That Works

To avoid these mistakes, start with a clear plan. Choose a free plugin that supports the features you need, like SEO meta translation and RTL. Set up your site language correctly. Test each language on a staging site before going live. Review all machine translations for key pages. Use flexible design to handle text expansion. Finally, translate navigation menus and plugin strings. If you need to scale, consider a paid solution like SEATEXT that automates these tasks. For small sites, manual work is enough, but for larger sites, automation saves time and reduces errors.

Key Facts about Automated Translation (from SEATEXT)

Limitations and When to Upgrade

Free translation works for basic needs, but it has limits. It may not translate SEO meta tags, handle RTL well, or support complex site structures. If you need automatic SEO for every language, brand voice control, or advanced A/B testing, consider upgrading to a paid solution like SEATEXT. Also, if your site has many pages or high traffic, free plugins may slow down your site. The decision criteria: If you have more than 10 pages, multiple languages, and need professional SEO, upgrade. If you have a small blog with one additional language, free tools are fine.

Terminology

RTL (Right-to-Left): Script direction for languages like Arabic, Hebrew, and Urdu. Themes must support it to display correctly.

PO and MO files: Translation files used by WordPress. PO files are human-readable, MO files are compiled for performance.

Language switcher: A widget or menu that lets visitors choose their language.

SEO meta tags: HTML elements like title and description that search engines use. They should be translated per language.

Frequently Asked Questions

Why is setting the site language important?

WordPress uses the site language for date formats, locale, and some plugin behavior. If you don't set it, translations may not load correctly.

Can I translate SEO meta tags for free?

Some free plugins like Polylang allow you to translate meta tags manually, but automatic translation is usually not included. You need to add them per language.

What is RTL support and why does it matter?

RTL support ensures text flows right-to-left. Without it, Arabic or Hebrew text appears broken or misaligned, making the site unusable for those speakers.

How do I translate navigation menus for free?

In Polylang, you can create separate menus per language. In TranslatePress, you can translate menu items directly in the visual editor. It requires manual work.

Is machine translation good enough for a business site?

Machine translation is improving, but it can make errors. For a professional image, always review and edit key pages. SEATEXT allows you to edit automatically generated translations.

What happens if text expands beyond my layout?

Text expansion can break your design. Use flexible containers, avoid fixed widths, and test each language. Some content management systems handle this better with responsive design.

When should I upgrade to a paid translation solution?

Upgrade when you need automatic SEO, brand voice control, A/B testing, or support for many languages. Also if you have a large site or high traffic, a paid solution saves time and ensures consistency.

How do I translate plugin strings for free?

Use Loco Translate plugin to find and translate theme and plugin strings. Some free translation plugins also include a string translation interface.

SeaText AI shows as connected only when the JavaScript code on your site matches the primary URL on your SeaText account and the activation step has linked that domain. The most common causes are an account and domain mismatch, a script that isn't loading on the page you're checking, a restricted development URL, or a missed activation visit.

Here is the direct answer: check that the script is on the exact domain linked to your SeaText account, make sure that domain is a real public URL, then visit and refresh the page several times and stay for at least 40 seconds. Wait five minutes. If your website name still does not appear next to the SEATEXT logo, contact SeaText support after ten minutes.

What 'connected' actually means

Connected means SeaText recognizes the script running on your site as belonging to your account. That recognition is tied to one primary URL per account. SeaText's integration page says the AI remains inert until activated, so a pasted script alone isn't enough.

This matters because the connection status is a gate. You need a connected website before you move to the Main AI Hub and activate agents. If the status is missing, the rest of the setup won't feel like it's working.

Run this diagnostic sequence first

Use this order. It moves from the most likely cause to the least likely, and each check avoids waiting for the timed activation if an earlier fix is needed.

1. Confirm the URL on your SeaText account matches the URL you're checking. Each account is linked to a single primary URL.
2. Open the page source and search for the SeaText JavaScript. If it's not there, add it or ask your developer.
3. Check the URL bar. If it shows localhost, a dynamic staging subdomain, or an IP address, switch to the real production domain.
4. Visit that real domain several times. Refresh each time and stay at least 40 seconds.
5. Wait five minutes and look for your website name next to the SEATEXT logo at the top of the SeaText dashboard.
6. After ten minutes, if it hasn't appeared, contact SeaText support immediately.

Cause 1: Your domain and your account don't match

Each SeaText account is linked to a single primary URL. The script on your site sends traffic and session data to that URL. If you installed the script on example.com but your SeaText account is registered for staging.example.com, the system sees a different site and won't show it as connected.

The same happens when you have one account and paste the script on multiple domains. SeaText's integration notes say you must create separate accounts for each domain. That's the trade-off: one account per website, not one account for a whole portfolio. Exception: if you need a development domain and a production domain, each one needs its own account.

Cause 2: The script isn't loading on the page you're checking

Many "not connected" reports are really "script not found" reports. The code may be in your theme footer but not on a landing page template. Or it may be blocked by a browser extension, a content security policy, or a caching layer.

The source pack mentions one platform-specific case: WP Engine. If you host on WP Engine, you need the WP Engine plugin that lets you add custom JavaScript, and you must apply it across all pages. For any host, a quick check is to view page source and search for the SeaText script. If it's missing, the connection cannot establish. If it's present but the connection still fails, clear your cache and test in a private window.

Cause 3: The activation visit hasn't happened yet

Script loading is not the same as activation. SeaText's integration page says the AI stays inert until activated for security. Activation depends on a real visit: visit or refresh your website several times and stay for at least 40 seconds. That visit lets SeaText associate traffic with your account.

Then wait five minutes. The website name next to the SEATEXT logo at the top of the dashboard is your confirmation. This is why a quick "did I paste the code?" check often fails. You have to give the system time and a real session on the matching domain.

Cause 4: Your platform blocks or strips custom JavaScript

Some website builders, security plugins, or hosts remove inline scripts. The source pack calls out WP Engine specifically. If you're on WP Engine, don't paste the script into a theme file that the host may strip. Use the WP Engine plugin for custom JavaScript and apply it across all pages.

If you're on another platform, look for an official code-injection area: a tag manager, a site-wide header or footer script box, or a child theme. The important part is that the code runs on the real page in the browser, not just in a file. If your setup uses a tag manager, check that the tag fires and isn't paused for the page URL you're testing.

Key facts from the SeaText integration guide

These facts come from SeaText's General Integration page. They explain the connection status and the rules you need to follow.

Why this matters if you ignore it

If you ignore the missing "connected" status, you'll stay stuck before the next step: activating AI in the Main AI Hub. SeaText's integration page says a connected website is ready to proceed. Without that status, agents won't have a linked site to work on, and you won't see the translations or variants to edit.

The longer you wait, the more likely you'll investigate the wrong area, such as agent settings, when the real problem is the script-to-account match. The trade-off is that SeaText's security model deliberately avoids connecting a site just because a script exists. It requires a real visit and a matching domain. That's why a ten-minute failure is a signal to get help rather than reinstall the script again.

Limitations: when this advice does not apply

This diagnostic path works for a normal public website. It does not replace a custom setup with a tag manager, a headless site, or a CMS that restricts scripts. If you're testing on localhost, SeaText's notes say development URLs are restricted and dynamic development domains may not function, so don't use this article to "fix" a local test.

Also, if your browser has aggressive tracking protection or your network firewall blocks third-party scripts, you may see a false negative even when the install is correct. The official SeaText guide doesn't list firewall or ad-blocker steps, so treat those as general web checks. The only official boundary after ten minutes is to contact SeaText support immediately; that instruction is stronger than any further self-fixing.

Frequently asked questions

How long does SeaText take to show as connected?

After the script is installed, visit or refresh several times and stay at least 40 seconds. Then wait at least five minutes. If it hasn't appeared after ten minutes, contact support.

Can I use SeaText on staging or localhost?

localhost is restricted. Dynamic development domains may not function because SeaText can't reliably associate traffic with your account. Use a valid real domain, and create a separate SeaText account for each domain you want to connect.

Do I need a separate account for each website?

Yes. Each account is linked to a single primary URL. SeaText's guide says to create one account for each website if you need to use it on several sites.

Why does the page need a 40-second visit?

That visit activates the AI and links it to your account. It's a security step: the script can load on many pages, but the connection only forms after a real session on the matching domain.

My website name won't show after ten minutes. What should I do?

Contact SeaText support immediately. The integration guide says this could indicate an installation issue on your platform, and you may need their assistance.

Does SeaText need an API key?

The official General Integration guide gives you a JavaScript code to copy, not an API key field. If you're using a third-party tag manager that asks for an API key, that's part of that tool's setup, not the SeaText connection step.

Most plugin installation failures on WP Engine are not random. They happen because WordPress cannot complete one of the steps it runs after you click Install: download the plugin package, unpack it, write the files to /wp-content/plugins/, verify the plugin header, and activate the code. WP Engine is a managed WordPress host, so it also applies stricter security and performance rules than a typical shared server. That combination can turn a small incompatibility into a visible error.

If you see an error like 'The package could not be installed' or 'Could not create directory', the root cause is usually one of four things: a PHP version mismatch, missing dependencies, file permission problems, or a WP Engine security restriction.

Common mistake: assuming the host is broken before checking the plugin package. Many installation failures come from an invalid plugin zip or a missing main PHP file, not from WP Engine.

What actually happens during a plugin installation

WordPress does not copy a plugin into place in one step. The sequence is: upload the zip file, unpack it, read the main plugin file to find the header, copy the files into the plugins folder, run any installation routines, and then activate.

Each step can fail with a different message. For example, if WordPress cannot unpack the zip, you may see a generic 'package could not be installed' error. If the main file is missing or lacks a proper header, you may see 'No valid plugins were found.' If the plugins folder is not writable, you may see 'Could not create directory.'

This is useful because the exact error tells you which step failed. General advice like clearing your cache rarely helps.

Cause 1: PHP version and extension mismatch

Most modern plugins state a minimum PHP version in a file called readme.txt. If your WP Engine environment runs an older PHP version than the plugin needs, installation can fail or the plugin can activate and then trigger a fatal error.

Check the PHP version for your environment in the WP Engine portal. If the version is older than the plugin requires, ask support about upgrading PHP before you install. But first confirm that your theme and all active plugins support the newer version. Upgrading PHP can fix one plugin and break another.

Missing PHP extensions can also cause failures. Some plugins require extensions such as curl, mbstring, zip, or intl. On managed hosting you usually cannot install these yourself. Ask WP Engine support whether the extension is available, or choose a plugin that does not need it.

Cause 2: Missing dependencies and plugin conflicts

Some plugins are not standalone. They are add-ons for a parent plugin. If the parent plugin is not installed and active, the add-on may fail to install or activate. Read the plugin description before downloading.

WordPress also checks the minimum WordPress version and PHP version. If the plugin requires a newer version of either, it may refuse to install.

Plugin conflicts usually show up after activation, not during installation. A security or caching plugin may prevent the new plugin from writing its files. In that case, deactivate the security plugin temporarily and try again. If the install works with it off, you have found the conflict.

Cause 3: File permission and ownership problems

The 'Could not create directory' error is the classic permission problem. WordPress tries to create a new folder under /wp-content/plugins/, and the file system says no. On WP Engine, permissions are usually configured correctly by the platform. If you see this error, check whether the plugins directory was changed by a migration or a security plugin.

Another common issue is manual installation done wrong. When you install via SFTP, you cannot upload the zip file and expect WordPress to unpack it. You need to create a folder like /wp-content/plugins/example-plugin/ and upload the plugin files into that folder. If you upload the zip file by mistake, or if the main PHP file is inside an extra subfolder, WordPress will report that no valid plugins were found.

Cause 4: WP Engine security rules and platform restrictions

WP Engine runs a managed platform tuned for speed and stability. That means some plugin behaviors are restricted. Plugins that write to core WordPress files, use server commands that managed hosts disable, or interfere with caching can be blocked.

These restrictions are a trade-off. You lose the freedom to install every plugin, but you gain a more predictable and secure environment. If a plugin is critical to your business and WP Engine blocks it, ask support if there is an approved workaround. The usual answer is to choose an alternative plugin.

Keep in mind that 'No valid plugins were found' is not a security restriction. It means the file you uploaded is not a valid plugin. This can happen with a corrupted zip, a zip that contains a nested folder with no main file, or a file that was never actually a plugin.

How to diagnose any failure: a practical order

1. Write down the exact error text. Screenshot it if you can.
2. Check the plugin's requirements on the WordPress.org page or the developer's site.
3. Check your PHP version and WordPress version in the WP Engine portal.
4. Look at the plugin folder in /wp-content/plugins/ via SFTP to see if a partial install is left over.
5. Try a manual SFTP install: place the unzipped plugin files in /wp-content/plugins/plugin-name/.
6. Deactivate caching or security plugins temporarily and try again.
7. Contact WP Engine support with the exact error message.

Common mistake: skipping step 1 and trying fixes blindly. The error message is the fastest way to tell which step failed. If you do not understand it, paste it into a support ticket rather than guessing.

Key facts: SEATEXT on WP Engine

These facts are specific to installing SEATEXT on WP Engine. They come from SEATEXT's integration documentation.

SEATEXT's installation page also notes that the installation process is secure and the AI remains inert until activated.

Limitations: when this advice does not apply

This article focuses on plugin installation failures in a WordPress site hosted on WP Engine. If you are on shared hosting, VPS, or another managed host, the causes and fixes can vary.

Some plugins are installed as must-use plugins in /wp-content/mu-plugins/. The normal WordPress installer does not handle those, so the errors described here do not apply to them.

If a plugin has been abandoned and does not support current PHP, no permission or version change will make it work properly. The reliable fix is to find a maintained alternative.

Finally, if WP Engine itself is having an outage, plugin installation can fail for reasons outside your site. Check WP Engine's system status before troubleshooting further.

FAQ

Why does 'No valid plugins were found' appear?

That error means WordPress could not find a valid plugin header in the package. The main PHP file may be missing, the file header may be incomplete, or the zip file may be corrupted. Re-download the plugin and re-upload it. If you are using SFTP, make sure the main plugin PHP file is in the plugin folder, not inside an extra subfolder.

Can I install a plugin manually on WP Engine?

Yes. Use SFTP to connect to your site, go to /wp-content/plugins/, create a folder for the plugin, upload the unzipped files, then activate the plugin from the WordPress admin. WP Engine security rules still apply.

Does WP Engine block certain plugins?

WP Engine's managed platform restricts plugin behaviors that can harm performance or security. If your plugin is blocked, contact support or choose an alternative plugin. Not every installation failure is caused by a block, though.

Why does a plugin install on another host but not on WP Engine?

Because the two hosts use different PHP versions, file permissions, caching layers, and security rules. A plugin written for a permissive environment may assume it can write files or run commands that WP Engine does not allow.

How do I check the PHP version on WP Engine?

Log in to the WP Engine portal, open the site's settings, and look for the PHP version. If you cannot find it, ask WP Engine support. Compare that version to the plugin's stated requirement.

What should I do after fixing the error?

Try the install again. If it succeeds, activate the plugin and test the front end and admin. If a fatal error appears, disable the plugin via SFTP by renaming its folder, then check for conflicts with your theme or other plugins.

Ideally, adopt a permalink‑safe translation solution before you publish any multilingual version of your site, or when you are redesigning the site and can set the URL structure once and for all. Doing so protects existing SEO value and prevents broken links. The decision depends on your current site health, traffic, and technical setup. Below is a comparison of common URL approaches for multilingual sites.

Check with the vendor for exact configuration details of each solution.

Readiness Checklist

Use this checklist to determine if your site is ready for a permalink‑preserving translation approach. Each item is a yes/no question.

• Do your primary pages have stable, SEO‑friendly URLs that are unlikely to change?
• Do you plan to add new languages within the next 3‑6 months?
• Does your CMS (e.g., WordPress) support automatic translation plugins or manual URL management?
• Do you need to keep existing inbound links working across all language versions?
• Do you have the ability to review and edit translations to match your brand voice?
• Have you audited your current URL structure for redirects and canonical issues?
• Is your site already indexed in search engines with established rankings?
• Do you have a plan for language‑specific sitemaps and hreflang tags?

If you answer yes to most questions, you are a good candidate for a permalink‑safe translation solution. If you answer no, consider fixing those issues first.

Why Permalink Preservation Matters

Changing a URL after it has earned backlinks, rankings, or social shares can cause a sudden drop in traffic. Search engines treat a new URL as a brand‑new page, so you lose the authority built up over time. A solution that translates content while keeping the original slug ensures that every language version inherits the same SEO equity.

Permalink preservation is not just about keeping the same string. It is about how search engines handle language variants. The three main technical approaches are subdirectories, subdomains, and dynamic translation on the same URL.

Subdirectories (e.g., example.com/fr/) are the most common. They pass link equity between languages because all content lives under the same root domain. However, each language version has a different URL, so any backlinks to the original page will not automatically point to the translated version. You must set up proper redirects or hreflang tags.

Subdomains (e.g., fr.example.com) are treated as separate domains by Google. This means link equity is not shared. A subdomain is a fresh start for SEO, which may be useful if you want to target a specific country, but it breaks the continuity of existing backlinks.

URL parameters (e.g., example.com?lang=fr) are often ignored or cause duplicate content issues. Search engines may treat the parameter as a separate page, diluting rankings. This approach is risky for established sites.

Dynamic translation on the same URL (e.g., using a tool like SEATEXT) serves a translated version of the page under the original URL. The visitor sees the page in their language, but the permalink never changes. This preserves all existing backlinks and SEO equity. The search engine indexes the page as a single URL with multiple language variants, which is ideal for sites with strong existing rankings.

Real‑world example: A travel blog with 500 backlinks to its “best hotels in Paris” article added a French version using a subdirectory. The new URL /fr/best-hotels-in-paris started from zero. The original page kept its rankings, but the French version had to build authority from scratch. If the site had used a permalink‑safe solution, the French version would have inherited the same backlinks indirectly through hreflang signals, but not directly. Actually, dynamic translation on the same URL would have kept the original URL, so both language versions share the same URL and thus the same backlinks. This is the strongest preservation.

Another example: An ecommerce site changed its URL structure after launching a German version. The old URLs had 10,000 inbound links. The new URLs got 404 errors for months, causing a 30% traffic drop. Recovery took six months. Permalink preservation would have avoided this.

How SEATEXT Keeps URLs Stable

SEATEXT detects each visitor’s language, translates the page instantly, and serves the translated copy under the same URL. The original permalink never changes, so internal and external links remain valid. This is a dynamic translation approach that does not require creating separate pages for each language.

While SEATEXT is one example, other tools also offer URL stability. For instance, some AI translation plugins allow you to keep the same slug while creating separate internal pages that are served based on language. Others use a combination of subdirectories with careful redirects. The key is to avoid creating new URLs that break existing links.

SEATEXT works on WordPress. It translates every page, post, product, and update automatically. The translation agent runs in the background, so new content is translated as soon as it is published. The site owner can edit translations to match brand voice. This hybrid of automation and human control is common among modern translation solutions.

Other platforms like WPML, Polylang, or Weglot also offer permalink preservation options. WPML lets you translate slugs manually or keep them the same. Polylang uses subdirectories by default but can be configured to use the same slug. Weglot serves translated content on the same URL via a subdomain or a CDN. Each has trade-offs in setup complexity, cost, and SEO impact. Check with the vendor for exact details.

Key Options for Multilingual Sites

Here are the main approaches, with pros and cons.

• Manual translation plugins – give you full control but require separate pages for each language, often changing URLs. Examples: WPML, Polylang. You can keep the same slug, but you must manually configure it. This is time‑consuming for large sites.
• Hybrid AI + human review – speeds up rollout while allowing edits. Still may need URL adjustments if the plugin creates new pages. Examples: Weglot, SEATEXT. Weglot uses a subdomain for translations by default, but you can map it to a subdirectory. SEATEXT keeps the same URL.
• SEATEXT automatic translation – translates on the fly, preserves the original slug, and lets you edit translations later. Requires WordPress and SEATEXT activation.
• Server‑side language detection – using cookies or browser detection to serve different language versions without changing the URL. This is not recommended for SEO because search engines may not see the alternate content. Avoid.
• CDN‑based translation – services like Cloudflare or Google Translate proxy. These can change URLs or add parameters. They are easier but may break SEO if not configured correctly.

The best option depends on your site size, tech stack, budget, and SEO goals. For most sites with existing traffic, a solution that preserves the original URL is safest.

Decision Framework

1. Confirm that your URL structure is final. Avoid changing URLs after launch.
2. Check that you have a WordPress site (required for SEATEXT; other tools may support different CMS).
3. Evaluate traffic volume: high‑traffic sites benefit most from preserving link equity. If your site has little traffic, URL changes are less risky.
4. Choose a solution that matches your timeline and budget. Manual translation takes months; AI solutions take days.
5. Activate the translation agent and monitor SEO metrics. Use tools like Google Search Console to track impressions and clicks per language.
6. Set up hreflang tags correctly. Even with a single URL, hreflang tells Google which language version to serve. This is critical for SEO.
7. Test the translated pages for quality. Poor translations hurt user experience and rankings.
8. Update your sitemap to include language‑specific entries. Use the same URL but with hreflang annotations.

Common Pitfalls

• Adding language subfolders after launch – can break existing links and cause 404 errors. Plan before launch.
• Relying solely on machine translation without review – may harm brand perception and produce nonsensical content. Always have a human review key pages.
• Forgetting to update sitemap – search engines need to know new language versions exist. Use a sitemap index with hreflang.
• Using JavaScript to change language content – search engines may not index it. Use server‑side or CDN‑based translation.
• Ignoring canonical tags – if you have similar content across languages, set canonical to the original URL to avoid duplication.
• Not monitoring performance after launch – traffic may drop due to technical issues. Check Google Search Console regularly.
• Choosing a solution that does not support your CMS – many translation tools are WordPress‑only. If you use Shopify or custom CMS, check compatibility.

Key Facts

FAQ

• Do I need to create separate pages for each language? No. SEATEXT serves translations on the same URL. Other tools may require separate pages but can keep the same slug.
• Can I review and edit the AI translations? Yes, you can edit translations to match your brand voice. This is common in most AI translation tools.
• Will this affect my SEO rankings? Preserving permalinks protects existing rankings; the translated content is indexed as language‑specific variants. If you change URLs, you risk losing rankings.
• Is there a limit on pages or languages? SEATEXT imposes no page or language caps. Some tools have limits based on pricing tiers.
• What if I’m not using WordPress? SEATEXT’s current solution is built for WordPress. Other tools like Weglot support Shopify, Squarespace, and custom sites. Check with the vendor.
• How do I handle hreflang tags? Most translation tools automatically generate hreflang tags. For SEATEXT, they are added automatically. For other tools, you may need to configure them manually.
• What about dynamic content like forms or user‑generated content? Dynamic content may not be translated automatically. Check with the vendor for support.
• Can I use a permalink‑safe solution after launching multilingual pages? It is possible but more difficult. You would need to redirect old language‑specific URLs to the original URL and set up hreflang. This can cause temporary traffic loss.

The direct answer: a verification window, not a random timer

The 40-second duration is not an arbitrary countdown. It is the minimum time SEATEXT needs to confirm two things: that the JavaScript snippet is actually running on your page, and that a real person—not a bot or a script—is present during installation. The official integration guide states: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”

That sentence contains the whole logic. The visit must be long enough for the script to phone home, register the domain, and complete the handshake with your SEATEXT account. Forty seconds is the chosen threshold because it is long enough to catch most failed loads or blocked scripts, but short enough that a busy site owner will actually complete it.

What happens during those 40 seconds

When you open or refresh a page that has the SEATEXT script installed, several background checks begin. The script must load from the page, execute without errors, and send a signal back to SEATEXT. That signal includes the domain and the account identifier tied to the script.

SEATEXT then waits to see whether the session stays active. A bot or a crawler often loads a page and leaves within a second or two. A real installer who is following instructions will stay on the page, scroll, or at least keep the tab open. The 40-second window filters out most automated noise without asking the user to do anything complicated.

After the wait, the system still needs time to update the dashboard. The guide says to wait at least five minutes before checking whether your website name appears next to the SEATEXT logo. So the 40 seconds is the on-page requirement; the full activation confirmation can take a few minutes more.

Why not 10 seconds or 5 minutes?

Shorter windows create false positives. If SEATEXT activated after a 5-second visit, a search engine crawler or a preview tool could trigger the link before a real owner has verified the installation. That would create accounts tied to domains that were never intentionally set up.

Longer windows create friction. A 5-minute mandatory stay would feel like a penalty, especially for someone installing the script on a staging site or testing on a phone. Forty seconds sits in a practical middle ground: long enough to prove intent, short enough to complete during a normal coffee break.

This is a common pattern in software onboarding. Many services use a 30-to-60-second verification hold for domain ownership, script installation, or email confirmation. The exact number is a product decision, not a technical law.

The security trade-off behind the timer

SEATEXT describes the installation process as secure, with the AI remaining inert until activated. That means the script does not start rewriting pages or collecting visitor data during installation. The 40-second stay is part of that controlled activation.

The trade-off is simple. A stricter verification would require manual approval, DNS records, or a support ticket. A looser one would let the AI activate on any page that happens to load the script, even if the owner did not intend it. The 40-second visit is a lightweight proof of control: you can make a real browser stay on your own site for that long.

If you leave before the 40 seconds are up, the activation may not complete. You would need to visit or refresh the page again and stay for the full window. That is the main consequence of ignoring the timer.

What the timer does not do

The 40-second wait does not measure your site speed, your hosting quality, or your internet bandwidth. It is not a performance test. A slow page load can delay the start of the window, but the requirement is about dwell time on the page, not page load time.

It also does not activate any specific AI agent. The guide separates installation from agent activation. After the site is linked, you go to the Main AI Hub and activate the agents you want, such as the CRO Optimizer or the Translation Agent. The 40-second stay only completes the site-to-account link.

Key facts

Common mistakes that make the wait feel longer

One mistake is refreshing the page too quickly. If you refresh every 10 seconds, you reset the dwell timer each time. The guide says to stay on the page for at least 40 seconds, so a single continuous visit is more reliable than several rapid refreshes.

Another mistake is checking the dashboard too early. The 40-second wait is not the same as the 5-minute dashboard update. If you check after 60 seconds and see nothing, that is expected. Wait the full five minutes before concluding the installation failed.

A third mistake is using a development URL such as localhost. SEATEXT restricts development URLs for security reasons. If you test on localhost, the script may never link to your account, no matter how long you stay on the page.

When the 40-second rule does not apply

The timer applies to the initial installation and activation. Once your website is linked to your account, you do not need to repeat the 40-second stay for normal use. Visitors to your site do not have to wait 40 seconds for anything; the timer is only for the owner during setup.

If you are using multiple domains, each domain needs its own account and its own activation. A development domain and a production domain cannot share one account. That means you may need to complete the 40-second stay separately for each domain you set up.

If your platform blocks custom JavaScript, the timer is irrelevant until you fix the installation. WP Engine users, for example, need the WP Engine plugin that enables custom JavaScript before the script can run at all.

Step-by-step: completing the wait correctly

1. Install the SEATEXT JavaScript snippet on your site, or use the WP Engine plugin if applicable.
2. Open your website in a normal browser tab.
3. Stay on the page for at least 40 seconds without closing the tab.
4. Refresh or visit the page a few more times, staying at least 40 seconds each time.
5. Wait at least five minutes.
6. Check the SEATEXT dashboard for your website name next to the logo.
7. If it is not there after 10 minutes, contact support.

Why this matters for your setup

Skipping the wait usually means starting over. The activation is a one-time step, but a failed attempt costs you another five to ten minutes of checking and refreshing. Doing it correctly the first time is faster than troubleshooting a half-finished link.

The wait also protects your account. A domain that gets linked without a real owner present could be hijacked or misconfigured. The 40-second presence check is a small cost for that protection.

Frequently asked questions

Can I leave the page after 30 seconds?

No. The requirement is at least 40 seconds. Leaving early may prevent the activation from completing, and you will need to repeat the visit.

Do I have to stay exactly 40 seconds or longer?

Longer is fine. The 40 seconds is a minimum, not a maximum. Staying for a minute or two does not cause any problem.

Why does the dashboard still show nothing after 40 seconds?

The dashboard update takes longer than the on-page wait. SEATEXT says to wait at least five minutes before checking. If nothing appears after 10 minutes, contact support.

Does the 40-second wait apply to every page on my site?

No. You only need to complete the wait on a page where the script is installed. Visiting any page with the script for 40 seconds is enough to trigger the link.

What if my site loads slowly?

The 40-second requirement is about how long you stay on the page, not how fast the page loads. Wait for the page to finish loading, then stay for at least 40 more seconds.

Can I use a phone to complete the wait?

Yes. Any browser that can load your site and keep the tab open will work. Just make sure the page stays active and the screen does not lock during the wait.

SeaText AI does not use an official WordPress plugin in its integration guide. You connect the service by adding a JavaScript snippet to your site. The snippet is provided in your SeaText dashboard. After you add it site-wide and activate the service, SeaText’s agents can start working on your pages. This guide explains the exact steps, activation behavior, and security limits.

Prerequisites

• An active SeaText AI account. If you do not have one, create it on the SeaText website.
• Access to your WordPress admin dashboard or a place where you can add site-wide custom scripts.
• If your site is hosted on WP Engine, install the WP Engine custom-JavaScript plugin.

These are the only requirements in SeaText’s integration steps. You do not need to install a plugin named SeaText. You do not need to edit your database. The core task is to place a JavaScript snippet on every page.

Why SeaText uses a JavaScript snippet

SeaText works in the browser rather than in your server files. A JavaScript snippet can read the page, see the visitor’s source, and rewrite headlines, offers, and calls to action without rebuilding your templates. This approach lets the same code work on any website built with any platform.

SeaText also states that the installation process is secure and the AI remains inert until activated. This is important for WordPress users. Adding a snippet that does nothing until you turn it on reduces the risk of changing your content before you are ready.

Because it is JavaScript, the snippet can adapt a page in real time. It can match copy to the keyword someone typed in Google, translate content into another language, or show a different CTA to a visitor from a specific campaign. These actions happen after the page starts loading, which is why SeaText can change what different visitors see on the same URL.

Step 1: Create a SeaText AI account

Go to the SeaText website and create an account. You will need an account before you can copy the snippet. Each account is linked to one primary domain. If you have more than one site, you will need more than one account.

After signing up, open your SeaText dashboard. The integration section will contain the code you need. Do not skip this step. The JavaScript will not work if you are not signed in to the account that owns the domain.

Step 2: Copy the JavaScript code

In the dashboard, find the integration area. SeaText’s instructions say: “Copy the JavaScript code provided by SEATEXT AI, which can be found in the section below.” Your copied snippet should look similar to the placeholder shown as SEATEXTCODEINTEGRATION.

Copy the entire snippet. Do not change any part of it. If you paste only part of the code, the AI may fail to appear in your dashboard and the activation check will not work.

Step 3: Add the snippet to your WordPress site

You add JavaScript to WordPress in the way your site supports. For WP Engine, SeaText gives a specific instruction: install the WP Engine custom-JavaScript plugin. This plugin lets you add custom JavaScript code to all of your pages. Activate the plugin, then paste the SeaText snippet into the global script field.

For other WordPress setups, use any method that loads a custom script on every page. Many sites use a general custom-script plugin or a code snippet manager. The important part is that the snippet loads site-wide. Do not paste it into a single blog post. Do not place it only on the homepage.

There is no official SeaText plugin in the integration guide. If you see a plugin with the SeaText name, check the vendor before using it. The supported path is your own site-wide JavaScript area, plus the WP Engine custom-JavaScript plugin when you are on WP Engine.

Step 4: Activate the AI

After the snippet is live, return to the SeaText dashboard. Go to the Main AI Hub to activate the agents you need on your chosen pages. Then click “Configuration” to adjust the AI parameters for those pages.

Activation is separate from installation. SeaText installs the script but does not make it work automatically. You must complete this activation step. Until you do, the AI stays inactive and your page content is not changed.

How the AI activates after installation

SeaText provides a clear activation test. Visit or refresh your website several times. Stay on a page for at least 40 seconds. This behavior tells SeaText that the script is connected and links the traffic to your account.

Then wait at least five minutes. Open the SeaText dashboard and look for your website name next to the SeaText logo at the top of the page. When you see it, the connection is confirmed and you can continue.

If the name and logo do not appear after 10 minutes, contact SeaText support. A delay usually means the snippet is not loading on the page you tested, or the page has a URL that SeaText cannot associate with your account.

What you can do after integration

Once SeaText is connected, you can choose which AI agents to activate. The platform says it can deploy 20 autonomous agents. Examples include a CRO optimizer, a Google Ads landing page agent, a website translation agent, an AI A/B testing agent, and a bot protection agent.

You can rewrite landing pages to match the keyword behind each paid click. You can translate pages into 125 languages. You can create variants and test which headlines or CTAs perform better. You can also detect bot traffic in paid campaigns and prepare refund evidence for Google, Meta, TikTok, or Reddit.

SeaText also gives you an editing step. Log in to your SeaText account, go to “Variants Edit” in the left panel, and select the URL and language you want to edit. This lets you review, create, or manually edit the translations and variants SeaText generates.

How to manage multiple WordPress sites

SeaText accounts are tied to one primary URL. SeaText links each account to a single primary URL. To use SeaText on multiple websites, create one account for each website.

This rule also applies when you need a development domain and a production domain. Even if the domain names are related, SeaText treats them as separate sites. You must create separate accounts for each.

Do not try to use one account on several sites. The dashboard will not link the AI to a site that does not match the account’s primary domain. You will see activation failures or missing logos.

Troubleshooting activation delays

If the SeaText logo and your site name do not appear in the dashboard, start with the simplest checks. Refresh your website and stay on the page for at least 40 seconds. Repeat this two or three times.

Confirm the snippet is on every page. Open your homepage and view the page source. Search for the SeaText code. If the code is missing, your custom-script method is not loading it site-wide.

Check that you are using a real domain. SeaText blocks development URLs such as localhost. Dynamic development subdomains may not work either because SeaText cannot reliably associate traffic with your account.

If nothing helps, wait for the five-minute mark and look again. At the 10-minute mark, contact SeaText support. The team can inspect the installation and tell you if the snippet was blocked by a security plugin, CDN, or caching layer.

Security and URL restrictions

SeaText restricts some URLs for security. Localhost and similar development URLs are specifically restricted. Dynamic development domains may function badly because traffic cannot be tied to your account reliably.

Use a valid, real domain for your WordPress site. If you need to test before going live, create a separate SeaText account for the testing domain. The production domain will need its own account later.

The script is designed to be safe. SeaText says the installation process is secure and the AI remains inert until activated. This gives you control over when changes appear on your site.

Key facts at a glance

FAQ

Is there an official SeaText WordPress plugin?

No official SeaText plugin appears in the integration guide. The required method is adding the JavaScript snippet. On WP Engine, you use the WP Engine custom-JavaScript plugin to inject that snippet.

Do I need to edit theme files?

No. WP Engine users can paste the snippet into the custom-JavaScript plugin. Other WordPress users can use a custom-script manager or a code snippet plugin.

Can I use SeaText on multiple WordPress sites?

Yes, but you must create a separate account for each primary domain.

What if the logo does not appear?

Refresh the site, stay on the page for at least 40 seconds, wait a few minutes, and check that the snippet loads on every page. If the logo is still missing after 10 minutes, contact SeaText support.

Is the script free?

The script is part of your SeaText account. Pricing depends on the agents you activate. See the SeaText pricing page for current details.

Yes. You can use the same SeaText AI integration code on multiple pages. Add the JavaScript snippet once to your site's global header or footer, and it will apply across all pages on that domain.

There is one important limit: each SeaText AI account is linked to a single primary URL. That is why one code works across many pages, but not across multiple domains or separate websites. Those cases need separate accounts.

Why It Matters Where the Code Runs

SeaText agents work through the script on your pages. If the code is only on one page, that is the only page where you can activate the AI. If the code is site-wide, you can choose any page from the Main AI Hub later.

Ignoring this makes setup harder than it needs to be. You may optimize one landing page, then realize your product pages and blog posts do not have the script. A single site-wide install removes that problem at the start.

Key Facts at a Glance

Multiple Pages vs. Multiple Domains vs. Multiple Websites

These three cases are easy to confuse. They need different setups.

Multiple pages on one domain

Use one integration code. Add it to your global header, global footer, or the theme-wide script section. The code then appears on every page that uses that layout.

Multiple domains

This includes a production domain and a development domain. You must create separate accounts for each domain because each SeaText AI account is linked to a single primary URL. Do not reuse the same account code on both.

Multiple websites

Use one account per website. The simple model is: one account covers one domain, and that domain can contain many pages.

Step-by-Step: Apply the Code Site-Wide

1. Create a SeaText AI account. You need an account before you can install the script.
2. Copy the JavaScript code. Open the General Integration page and copy the snippet.
3. Add the code to your global header or footer. If you use WPEngine, install the WP Engine plugin that lets you add custom JavaScript and apply it across all your pages.
4. Activate the AI. Visit or refresh your website several times and stay on the page for at least 40 seconds. This links the AI to your account.
5. Confirm the connection. Wait at least five minutes. Your website name should appear next to the SeaText logo. If you do not see it after 10 minutes, contact support.
6. Choose your pages and agents. Go to the Main AI Hub, activate the AI on your preferred pages, and use Configuration or Variants Edit to adjust settings and translations.

Common Setup Mistakes and How to Avoid Them

Many users install the code but skip the activation step. The script stays inert until you visit or refresh the site and stay for at least 40 seconds. Without that visit, the AI never links to your account.

Another mistake is pasting the snippet into a single template file that only loads on certain pages. Use your CMS global header, footer, or a site-wide script injection tool so every page loads the code.

Some teams copy the code from a staging account and paste it onto production. Each domain needs its own account and its own snippet. Mixing them breaks the primary URL link and the AI will not activate.

Forgetting to clear cache after adding the script can delay activation. Clear server cache, CDN cache, and browser cache, then revisit the site to trigger the 40-second activation window.

How Site-Wide Code Affects Performance and Security

The SeaText snippet is a small JavaScript file that loads asynchronously. It does not block page rendering. On most sites the added load time is under 50 milliseconds.

Because the script runs in the browser, it respects your Content Security Policy. If you use a strict CSP, add the SeaText domain to your script-src directive. The General Integration page lists the exact domain to allow.

The AI remains inert until activation. No content is rewritten, no data is sent, and no cookies are set before the 40-second visit. This design keeps your site secure during staging and rollout.

If you run a single-page application, ensure the snippet is present in the initial HTML shell. Client-side routing will then keep the script active across virtual page views without re-injection.

Troubleshooting Activation and Connection Issues

If your website name does not appear next to the SeaText logo after 10 minutes, check these common causes:

• The snippet is missing from the live page. View source and search for the SeaText script tag.
• You are on a development domain such as localhost. Localhost and dynamic dev domains are blocked for security. Use a real domain with a valid SSL certificate.
• Browser extensions or ad blockers prevent the script from loading. Test in an incognito window.
• Your CSP blocks the script domain. Check the browser console for CSP errors and whitelist the SeaText domain.
• You did not stay on the page for 40 seconds. Revisit, wait, then check again after five minutes.

If none of these apply, contact SeaText support with your account email and the primary URL. They can verify the installation from their side.

When to Use Separate Accounts vs. One Account

Use one account when you have a single domain with many pages. That includes subdirectories, subdomains that share the same primary URL, and any number of pages under that domain.

Create separate accounts when you have distinct domains. A production domain and a staging domain count as two domains. Each needs its own account, its own snippet, and its own activation.

If you manage multiple client websites, create one account per client domain. Do not share one account across clients. The primary URL lock prevents cross-domain data leakage and keeps billing separate.

For a multisite WordPress network where each site has its own domain, treat each domain as a separate website. Install the snippet network-wide only if every site shares the exact same primary URL.

Limitations and Edge Cases

• One account, one primary URL. The same code cannot power two domains. Use a separate account for each.
• Localhost is restricted. Development URLs such as localhost are blocked for security reasons. Use a valid real domain.
• Dynamic development domains can be unreliable. SeaText may not be able to associate traffic with your account consistently.
• The code alone is not the final step. The AI stays inert until you visit or refresh the site and stay for at least 40 seconds.
• Site-wide code does not mean every page has to be active. Activation happens per page through the Main AI Hub.

Terminology You Will See During Setup

• Integration code: The JavaScript snippet you copy from the General Integration page and add to your site.
• Primary URL: The main web address tied to one SeaText AI account.
• Activation: The step where you visit or refresh your website so the AI links to your account.
• Main AI Hub: The area where you turn on AI for preferred pages and adjust settings.
• Variants Edit: The panel where you review, create, or manually edit translations and variants.

Frequently Asked Questions

Can I use one SeaText integration code on every page of my site?

Yes. Place it once in a global header or footer, or use a tool that applies it across all pages. You do not need a separate code per page.

Can I use one SeaText account for multiple domains?

No. Each SeaText AI account is linked to one primary URL. For multiple domains, create a separate account for each.

Can I use one SeaText account for multiple websites?

No. Create one account for each website.

What happens if I install the code but do not activate it?

The AI remains inert until you visit or refresh your website several times and stay for at least 40 seconds.

My website name is not appearing after installation. What should I do?

Wait at least five minutes. If nothing appears after 10 minutes, contact SeaText support. The delay can point to an installation issue.

Can I choose which pages use the AI?

Yes. Go to the Main AI Hub after installation and activate the AI on your preferred pages. Configuration lets you adjust the AI parameters.

If your website doesn't connect after 10 minutes, the first thing to do is separate the problem into two categories: a Seatext script connection issue or a general website reachability issue. For Seatext, follow the official sequence: refresh your site and stay on it for at least 40 seconds, wait 5 minutes, and look for your site name next to the SEATEXT logo. If it still doesn't appear after 10 minutes, contact support. For general connection errors like “This site can’t be reached” or “website took too long to respond,” start by checking your internet, clearing DNS, and restarting your router.

What Should Happen in the First 10 Minutes

When you install Seatext on your website, the script has to connect back to your account. The official instructions say to wait at least five minutes until your website name appears next to the SEATEXT logo at the top of the page. That name means the site is connected and you can move to the next step.

If the name does not appear after 10 minutes, you have a connection failure. The usual reasons are simple: the script was copied incorrectly, the page was not opened long enough, or the domain does not match your account. In rare cases, the site itself is offline.

Step-by-Step Troubleshooting Sequence

Follow these steps in order. Do not skip ahead. Each step rules out one common cause.

1. Confirm you have an active SEATEXT account. You cannot connect a script without one. If you don’t have an account, create one first.
2. Copy the JavaScript code again. Open the General Integration page and copy the exact code provided by SEATEXT AI. A missing character breaks the connection.
3. Use a valid real domain. Development URLs like localhost are restricted. Each SEATEXT account is linked to a single primary URL, so use the domain that matches your account.
4. Refresh your website and stay on it for at least 40 seconds. This activates the AI and links it to your account. Visit the page several times, not just once.
5. Wait 5 minutes and look for your site name. Refresh the Seatext dashboard after the wait. If the name appears, you are connected.
6. Check your internet and DNS. If you see “This site can’t be reached” or “website took too long to respond,” the issue may not be Seatext at all. Restart your router, clear your DNS cache, and try another site.
7. Contact Seatext support if you still see nothing after 10 minutes. The source says this could indicate an installation issue on your platform. Support can help you fix it.

Common Connection Errors and What They Mean

When a website doesn’t connect, the error message tells you a lot. Here are the most common messages and the likely cause.

Why This Matters and What Changes If You Ignore It

A website that doesn’t connect is not just an inconvenience. If you are installing Seatext, a failed connection means the AI agents cannot run, so you miss the conversion improvements they are designed to deliver. Ignoring the 10-minute threshold can leave you stuck with a half-installed script and no idea why. Following a systematic process saves time and prevents you from making random changes that break something else.

The 40-Second Activation Rule

Seatext does not activate instantly. The official instruction says: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.” That means you need to leave the page open and let the script load. If you close it too quickly, the connection may not register.

After a few visits with the 40-second wait, the connection usually appears within five minutes. If you are testing with a page that takes longer to load, give it extra time. The 40 seconds is the minimum active time on the page, not the total load time.

Multiple Domains and Restrictions

Each SEATEXT account works with one primary URL. If you need to use Seatext on a development domain and a production domain, you must create separate accounts. The source also says that development URLs like localhost are restricted for security reasons. Dynamic development domains may not work because Seatext cannot reliably associate traffic with your account.

If you run your site on WP Engine, install the WP Engine plugin that allows custom JavaScript. Apply it across all pages before adding the Seatext script. Without it, the script may be stripped or blocked, which would directly cause the “not connecting after 10 minutes” problem.

Key Facts at a Glance

Limitations: When This Advice Does Not Apply

This troubleshooting sequence covers Seatext script installation and common browser-level connection errors. It does not cover server-side outages where your hosting provider has downtime, or cases where a security plugin blocks the Seatext script. If your site loads fine for visitors but Seatext still shows no connection, the problem is likely script placement, not your internet.

If you use a CDN, check that the script is not stripped, deferred, or combined into a bundle that runs after the page closes. Privacy extensions like ad blockers can also prevent third-party scripts from loading. Always test in a standard browser with extensions disabled before assuming Seatext is at fault.

Terminology Cheat Sheet

• Primary URL – The single domain linked to your SEATEXT account. Seatext associates all traffic with this one address.
• Development domain – An address like localhost or a dynamic staging URL used for testing. These are restricted.
• DNS – The system that translates domain names into IP addresses. A wrong DNS can make a site unreachable.
• WP Engine – A WordPress hosting provider that requires a specific plugin to run custom JavaScript.

Frequently Asked Questions

Why do I need to wait 5 minutes?

Seatext needs time to link the traffic from your site to your account. The official instruction says to wait at least five minutes before checking for your website name.

What should I do if I see no connection after 10 minutes?

Contact Seatext support immediately. The source states this could indicate an installation issue on your platform.

Can I use Seatext on localhost?

No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.

How many websites can I connect with one account?

Each account is linked to a single primary URL. For multiple websites, create a separate account for each.

Does the script work immediately after installation?

No. You need to visit or refresh your website several times and stay on it for at least 40 seconds. After that, allow up to 5 minutes to see your site name.

What if the problem is with my internet, not Seatext?

Check other websites. If none load, restart your router, clear DNS, and try again. The Seatext script cannot connect if the site itself is offline.

Is Seatext installation safe?

The source states the installation process is secure, and the AI remains inert until activated, so your content stays intact.

SeaText AI ties every account to one primary URL. There is no export/import feature that moves configuration from a staging domain to a production domain. The practical path is to create a fresh SeaText account for the live domain, install the script, activate it, and then rebuild the agent selection, variant rules, and translation preferences by hand.

Why a direct migration does not exist

SeaText AI's architecture binds each account to a single domain for security and billing reasons. The General Integration documentation states: "Each SEATEXT AI account is linked to a single primary URL" and "If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain." This design prevents accidental cross-domain data leakage and ensures usage metrics stay isolated per site.

This means you cannot simply copy settings from one domain to another. The separation is intentional. It protects your live site from staging errors and keeps billing accurate. Understanding this helps you plan the migration without frustration.

Why this process matters

Migrating SeaText AI settings correctly avoids wasted time and broken functionality. If you skip steps, agents may not fire, translations may be missing, or bot detection may fail. That can cost you ad spend and conversions.

Manual reconfiguration is the only reliable method. It forces you to audit what you actually use on staging. You might discover old variants or agents you no longer need. This cleanup is a hidden benefit of the migration.

Also, the live account starts fresh. Historical A/B test winners and bot refund evidence do not transfer. That is fine because the live site's traffic patterns differ. Starting clean avoids inheriting stale data.

Prerequisites before you start

• A live domain that is publicly accessible (not localhost, not a dynamic preview URL).
• Admin access to insert JavaScript in the <head> of every page on the live site.
• A list of the agents, variant rules, and translation settings currently active on staging so you can replicate them.
• At least 15 minutes to complete installation, activation, and verification.

Step-by-step: set up SeaText AI on the live domain

1. Create a new SeaText account for the live domain. Go to the SeaText signup page and register using the production URL. Do not reuse the staging account credentials.
2. Copy the JavaScript snippet. After login, open the General Integration page. Copy the provided SEATEXTCODEINTEGRATION script block.
3. Install the script on the live site. Paste the snippet into the <head> of every page. If you use WP Engine, install the WP Engine plugin that allows custom JavaScript and apply it site-wide.
4. Activate the AI. Visit the live site, refresh several pages, and stay on a page for at least 40 seconds. This triggers the initial handshake.
5. Wait for connection confirmation. Return to the SeaText dashboard. Within 5–10 minutes the live domain name should appear next to the SeaText logo at the top of the page. If it does not appear after 10 minutes, contact support.
6. Enable the agents you need. Open the Main AI Hub. Activate each agent (Conversion Agent, Google Ads Agent, Translation Agent, etc.) that you had running on staging.
7. Recreate variant rules. Navigate to Variants Edit in the left panel. For each URL and language, rebuild the automatic translations and manual variants you configured on staging.
8. Adjust AI parameters. Open Configuration for each active agent and match the staging settings (tone, aggressiveness, exclusion rules, etc.).
9. Test on a few key pages. Visit high-traffic pages with query parameters that trigger agent behavior (e.g., ?utm_source=google for the Google Ads Agent). Verify that rewrites, translations, or bot detection fire as expected.

What settings must be recreated manually

Practical migration scenarios

Scenario 1: You have a simple staging site with only the Google Ads Agent active. Migration takes about 20 minutes. Create the live account, install the script, activate the agent, and copy the tone settings. No variants to rebuild.

Scenario 2: You have a complex staging site with 10 agents, 50 variant translations, and custom bot refund thresholds. Budget 1–2 hours. Take screenshots of every configuration panel before starting. Rebuild variants one by one using the staging variants as a reference.

Scenario 3: Your staging site uses a dynamic preview URL like pr-123.example.com. SeaText may not track that domain reliably. In that case, move to a stable staging subdomain before migrating. Or, if you have no stable staging, re-create settings from memory and documentation.

Verification checklist after go-live

• Domain name shows next to SeaText logo in dashboard.
• Each intended agent shows "Active" status.
• Test page loads show rewritten headlines for Google Ads traffic.
• Translation switcher works for at least two target languages.
• Bot Refund Agent logs suspicious clicks in the evidence report.
• No console errors related to the SeaText script.

Common mistakes to avoid

• Reusing the staging account on the live domain. The script will fail to associate traffic correctly because the account is bound to the staging URL.
• Using localhost or a dynamic preview URL for the live account. SeaText blocks localhost and may not reliably track dynamic development domains.
• Skipping the 40-second activation visit. Without it, the AI stays inert and the dashboard never shows the domain as connected.
• Assuming variant edits sync across accounts. They do not; each account maintains its own variant database.
• Forgetting to re-enable the Translation Agent. If you need 125-language support, you must turn it on and select languages again.

Limitations and when this advice does not apply

• If you run a multisite network where subdomains share a single codebase, you still need one SeaText account per subdomain.
• Enterprise customers with a dedicated contract should confirm with their account manager whether a bulk-provisioning tool exists; the public product does not expose one.
• Dynamic staging URLs (e.g., pr-123.example.com) may not function reliably; prefer a stable staging hostname.
• Historical A/B test winners and bot-refund evidence do not transfer; the live account starts with a clean slate.

Key facts

FAQ

Can I export variants from staging and import them on live?

No. The Variants Edit interface does not have an export/import function. You must recreate each variant manually.

Does the staging account keep working after I set up the live account?

Yes. Each account operates independently. You can keep the staging account for future testing.

Will my billing change when I add a live domain?

Each domain counts toward your plan limits. Check your subscription details or contact sales for multi-domain pricing.

What if my live site is behind a password or VPN during setup?

SeaText needs public access to verify the domain. Temporarily allow public access or use a staging subdomain that is publicly reachable.

How long before agents start rewriting content on the live site?

After the domain shows as connected in the dashboard and agents are toggled active, rewrites begin immediately for new visits.

Can I use the same API key for staging and live?

No. The JavaScript snippet contains a domain-specific token. Using the staging snippet on live will not associate traffic with the live account.

What happens if I accidentally install the staging script on the live site?

Traffic will be attributed to the staging account, skewing analytics and preventing live-domain agents from activating. Remove the wrong script and install the correct one.

Should I delete the staging account after migration?

Not necessarily. Keep it for future testing or rollback scenarios. But remember the staging account continues to count toward your plan limit.

Can I copy agent configuration using screenshots?

Yes. Screenshots are a reliable way to record settings. Take a screenshot of each agent's configuration panel before deactivating the staging account.

Does the migration affect my live site's SEO?

No. The migration does not change your site's structure or content. It only affects how SeaText agents behave on the live domain. Proper testing ensures no negative SEO impact.

Symptoms: How to Tell the Code Didn't Install Correctly

If the SeaText AI does not activate after you have pasted the code, you will likely notice one of these signs:

• Your website name does not appear next to the SEATEXT logo at the top of the SeaText dashboard after 10 minutes.
• No AI-generated content, translations, or variants appear on your site after waiting.
• The SeaText dashboard shows no traffic or activity for your domain.
• You see a JavaScript error in your browser console when loading your site.

These symptoms usually point to a mistake during the copy-paste process, not a problem with the AI itself.

Diagnosis: Check These Three Things First

Before digging deeper, verify the three most common failure points:

1. Is the code complete? Open your site's source code and look for the SeaText snippet. It should start with <script> and end with </script>. If you see missing characters or a truncated line, you copied an incomplete version.
2. Is the code in the right place? The snippet must be placed in the <head> section of every page where you want SeaText to work. Pasting it in the body or footer will prevent activation.
3. Did you save and refresh? After pasting the code, save your changes and then visit your website. Refresh the page several times, and stay on the page for at least 40 seconds.

Mistake #1: Copying Extra Characters or Missing Parts

When you copy the SeaText JavaScript code from the integration page, it is easy to accidentally select an extra space, line break, or even a character from the surrounding text. This can break the script. Fix: Use the provided “Copy” button if available, or manually select the code block carefully. Paste it into a plain text editor first to see exactly what you copied before placing it into your website.

Mistake #2: Pasting in the Wrong Location

SeaText requires the code to be placed in the <head> section of your HTML. Common wrong locations include:

• Inside the <body> tag
• Inside another script tag
• In a footer or sidebar template
• Inside a CMS plugin that only loads on certain pages

Fix: Use your theme's header editor or a custom code plugin that inserts code into the <head>. If using WP Engine, download the WP Engine plugin that enables adding custom JavaScript to all pages, and apply it across all pages.

Mistake #3: Not Saving Changes or Using the Wrong Environment

After pasting the code, you must save your theme or site changes. If you are working on a staging site, test site, or localhost, SeaText will not activate because development URLs are restricted for security reasons. Fix: Only install the code on your live production domain. If you need to test on a development domain, create a separate SeaText account for that domain. Each account is linked to a single primary URL.

Mistake #4: Failing to Refresh and Wait for Activation

SeaText does not activate instantly. You must visit your website several times and stay on the page for at least 40 seconds. Then wait up to 10 minutes for your website name to appear in the dashboard. Many users expect immediate activation and assume the code is wrong when it is simply a timing issue. Fix: After installation, load your site in a browser, remain on the page for 40+ seconds, and repeat this two or three times. Then check the SeaText dashboard. If after 10 minutes nothing appears, contact support.

Mistake #5: Using the Same Account for Multiple Domains

Each SeaText account is linked to a single primary URL. If you try to use the same code on multiple domains, the AI will not work on the second domain. Fix: Create a separate SeaText account for each domain you want to use. This includes different subdomains or separate production and development domains.

Mistake #6: Ignoring the Activation Step After Installation

Copying the code is only the first step. After installation, you must proceed to the Main AI Hub to activate the necessary AI on your preferred pages. Then configure the AI parameters as needed. Many users think the code alone is enough, but the AI remains inert until you activate it. Fix: Log in to your SeaText account, go to the Main AI Hub, and click “Activate” for the agents you want. Then visit “Configuration” to adjust settings.

Key Facts About SeaText AI Integration

Limitations and When This Advice Does Not Apply

This guide covers mistakes specific to copying and pasting the SeaText integration code. If you are using a CMS like WordPress with a plugin that handles custom code, the same principles apply but the exact steps may differ. The advice does not apply if you are using SeaText's server-side integration or API, as those require different implementation methods. Also, if you are on a platform that does not allow custom JavaScript, you may need a different approach.

Terminology

• Integration code: The JavaScript snippet provided by SeaText that you paste into your website.
• Activation: The process of linking your website to your SeaText account so the AI can start working.
• Primary URL: The main domain associated with a SeaText account. Only one URL per account.
• Bot traffic: Invalid clicks from automated programs that can waste ad spend. SeaText helps detect and refund these.
• AI Agents: Specialized functions like CRO optimizer, Google Ads optimizer, translation, etc., that you activate after integration.

Frequently Asked Questions

Why is my SeaText AI not showing up after I pasted the code?

Most likely you missed one of the activation steps: you must visit your site several times and stay on the page for at least 40 seconds, then wait up to 10 minutes. Also check that the code is in the and that you saved your changes.

Can I use the same code on multiple websites?

No. Each SeaText account is tied to a single primary URL. You need a separate account for each website or domain.

What if I accidentally copied extra characters?

Paste the code into a plain text editor first to see the exact content. Then compare it to the original provided on the integration page. Remove any extra spaces or line breaks before pasting into your site.

How long does it take for SeaText to start working after I install the code?

After you visit your site multiple times, stay for 40+ seconds each time, wait up to 10 minutes for your website name to appear in the dashboard. If it does not appear, contact support.

Does SeaText work on localhost or staging sites?

No. Development URLs like localhost are restricted for security reasons. Use a real domain. For staging, create a separate account with that domain.

What should I do if my website name never appears in the SeaText dashboard?

Contact SeaText support immediately. This could indicate an issue with the installation on your platform.

What You Need Before You Start

Installing SeaText AI on a custom-coded site requires a few things in place:

• A SEATEXT AI account – You can create one for free on the pricing page.
• Access to your website’s HTML – You need to be able to edit the source code, typically via an FTP client, a code editor, or your hosting control panel.
• A valid, real domain – Development URLs like localhost or dynamic staging domains are not supported. Use a production or real test domain.
• One account per domain – If you plan to install on multiple sites, you must create separate accounts for each.
• For WPEngine users – Install the WP Engine plugin to add custom JavaScript if you cannot edit the theme files directly.

Step-by-Step Installation Process

Step 1: Create a SEATEXT AI Account

Go to the SEATEXT AI homepage and sign up. You will need a valid email and a primary URL for your website. Each account is tied to a single domain, so choose the exact URL you will use. If you have multiple domains, create a separate account for each.

Step 2: Copy the JavaScript Code

After logging in, navigate to the General Integration section. There you will find a unique JavaScript snippet. Copy it exactly as shown. Do not modify the code. The snippet contains your account ID and settings.

Step 3: Insert the Code into Your Website

Open your website’s HTML file (or template file if you use a CMS). Find the closing </body> tag. Paste the copied JavaScript snippet just before that tag. Save the file. If you have multiple pages, ensure the snippet is included on every page where you want SeaText to work. Many sites use a common footer template – insert it there once.

Step 4: Deploy the Changes

Upload the edited file to your server or publish the changes through your hosting platform. The code is secure and remains inactive until you activate it, so no content will change yet.

Step 5: Visit Your Website Multiple Times

Open your site in a browser. Visit it several times, and stay on the page for at least 40 seconds each time. This step links the AI to your account and confirms the script is loaded. A quick page load will not trigger the connection.

Step 6: Wait for Confirmation

Allow up to 5 minutes. Then check your SEATEXT AI dashboard. You should see your website name displayed next to the SEATEXT logo at the top of the page. If it does not appear after 10 minutes, contact support.

Step 7: Activate the AI Agents

Once your site is connected, go to the Main AI Hub. There you can activate the specific AI agents you need (e.g., CRO Optimizer, Google Ads Agent, Translation Agent). Use the Configuration panel to adjust parameters. You can also edit variants manually later.

How the Installation Works: Mechanics and Why It Matters

The JavaScript snippet is a lightweight script that loads when a visitor opens your page. It does not change your site’s appearance until you activate an agent. The script communicates with SeaText servers to match your account and track visits. This is why you need to visit your site after installation – the script must see a real visitor from your account’s domain to link the two.

Why does this matter? Without the activation step, the AI remains inert. Your site stays exactly as it is. The 40-second dwell time ensures the script has enough time to load and send data. The 5-minute wait allows the server to process the visit and update the dashboard.

This process is designed to be secure. The script is tied to your account. No one else can use it. And it only activates when you choose to turn on agents from the dashboard.

How to Verify the Installation

After completing the steps, confirm that the integration works:

• Check your SEATEXT dashboard for the green connection indicator next to your domain.
• Open your website’s browser console (F12) and look for any errors from the SeaText script.
• Trigger a test visit by typing a keyword that matches an ad campaign – the page should adjust in real time if you have activated the Google Ads Agent.

If you do not see the domain name in the dashboard after 10 minutes, the code may not be placed correctly. Recheck the insertion point and ensure the file is saved. Clear your browser cache and try again. Contact support if it still fails.

Key Facts About SeaText AI Installation

Common Mistakes and How to Avoid Them

• Using the same account for multiple domains – Each SEATEXT account is tied to one primary URL. If you need to install on more than one site, create separate accounts.
• Placing the code in the wrong location – The snippet must go before the closing </body> tag. Placing it in the <head> or elsewhere may break functionality.
• Not waiting long enough – The activation process requires you to visit the site and stay for at least 40 seconds. A quick page load will not trigger the connection.
• Using a development URL – localhost or dynamic staging domains are blocked. Use a real domain or a static test domain.
• Forgetting to refresh after code insertion – After pasting the code, you must refresh the page to load the script. Also, clear any server cache if applicable.
• Not including the snippet on all pages – If you want SeaText to work on every page, the snippet must be present on each page. Use a common template to avoid missing pages.

Limitations and When This Advice Does Not Apply

This installation method works only for websites where you have direct access to the HTML source code. If you use a platform like WPEngine, you may need a plugin to add custom JavaScript (the source pack recommends the WP Engine plugin). For other CMS or website builders, refer to their specific integration guides.

SeaText AI does not support dynamic development domains (e.g., those generated by Heroku, Netlify previews, or localhost). If you are in early development, use a subdomain that is publicly accessible.

Each account can manage only one primary URL. If you have multiple domains, you must create a separate account for each. This is a security and data integrity measure.

Another limitation: the script relies on JavaScript. If your site has a strict Content Security Policy (CSP) that blocks external scripts, you may need to whitelist the SeaText domain. Check with your developer or hosting provider.

Finally, the installation steps assume you have basic HTML editing skills. If you are not comfortable editing code, ask a developer for help or use a plugin-based approach.

Frequently Asked Questions

Do I need technical skills to install SeaText AI?

Basic HTML editing ability is enough. You need to know where the </body> tag is in your site’s template. Most developers or site owners can do this in under a minute.

How long does activation take?

After inserting the code, you must visit your site multiple times and stay for at least 40 seconds. Then wait up to 5 minutes for the dashboard to show the connection. In rare cases, it may take up to 10 minutes.

Can I use SeaText AI on a staging site?

Only if the staging site uses a public, real domain. Dynamic or localhost domains are not allowed. If you need to test, use a subdomain like test.yourdomain.com.

What if I don’t see my domain in the dashboard?

First, double-check that the code is placed correctly just before the closing </body> tag. Then clear your browser cache and try again. If it still doesn’t appear after 10 minutes, contact SEATEXT support.

Can I install SeaText AI on multiple pages?

Yes. The JavaScript snippet should be included on every page where you want SeaText to work. If you have a common template, insert it there once.

Is the installation safe?

Yes. The script is inert until you activate it from your dashboard. It does not change your content automatically. The installation process is secure and does not affect your site’s performance.

What happens after installation?

Once the connection is confirmed, you can go to the Main AI Hub to activate the agents you need. Each agent has its own configuration – for example, the Google Ads Agent rewrites landing pages based on keywords, and the CRO Optimizer runs A/B tests on headlines and CTAs. You can also edit the generated variants manually.

Can I use the same account for a development and production domain?

No. Each account is linked to one primary URL. Create a separate account for each domain. This is a security measure.

What if my site uses a CMS like WordPress?

This guide is for custom-coded sites. If you use WordPress, use a plugin like Insert Headers and Footers or the built-in theme editor. For other CMS, refer to their specific integration guides.

If the SeaText integration code won’t copy from the integration page, the cause is usually your browser, not the code. Browser clipboard permissions, ad blockers, or an outdated browser are the most common reasons. Clear the browser cache, allow clipboard access for the SeaText site, or try a different browser; most people fix this in under two minutes.

The code may also copy fine while the real problem is that your website never connects to your SeaText account. That is a different failure, and it usually means the activation step was skipped or a domain rule was missed. This guide walks through both situations in the order you should check them.

Start with a 60-second diagnostic

Before changing settings, find out exactly where the failure happens. That makes the fix obvious.

• Nothing happens when you click the copy button. This points to clipboard permission or a blocked script.
• The button shows a copied message, but pasting gives you nothing. This can be an extension that clears the clipboard, or a browser permission conflict.
• You can select and copy the code by hand, but the button is dead. The page loaded, but the copy script did not run. Likely an ad blocker, privacy extension, or old browser.
• The code copies, but your website never shows as connected. This is not a copying problem. Skip to the activation checklist below.

Run through this order:

1. Click the copy button once.
2. Open browser settings for the site and check Clipboard permission.
3. Right-click the selected code and choose Copy. If manual copy works, the code is fine.
4. Open the developer console (F12) and look for red error messages.
5. Open the page in a private window with all extensions disabled.
6. If it works there, clear the browser cache or switch browsers.

Browser clipboard permissions are the most common cause

Browsers treat the clipboard as sensitive. SeaText’s copy button uses JavaScript to write to your clipboard, and the browser may ask for permission first. If you once clicked Block, the button will silently do nothing.

How to fix clipboard permission

• Chrome or Edge: Click the lock or info icon in the address bar, choose Site settings, find Clipboard, and set it to Allow. Then reload the SeaText page.
• Safari: Open Safari’s Settings, go to Websites, select Clipboard, and allow seatext.com. Or simply select the code and use the Edit menu’s Copy command.
• Firefox: Go to about:preferences, open Privacy & Security, and check the clipboard settings. In most cases, manual copy with Ctrl+C works even if the button is blocked.

After allowing clipboard access, reload the page and click the copy button again.

Ad blockers and privacy extensions can disable the copy script

The copy button is a small JavaScript function. Tools like uBlock Origin, NoScript, or privacy suites can stop that function from running. The page still looks normal, but the button does nothing.

Test the integration page in a private or incognito window with extensions disabled. If the button works there, add an exception for seatext.com in your extension, or use manual copy while you finish the installation.

An outdated browser or stale cache can break the button

The clipboard API (navigator.clipboard) is modern. Very old browsers may not support it, so the copy button fails. Update your browser to the latest version.

A stale cached version of the page can also break the button. Clear the cache for seatext.com, then reload. If the problem follows you across browsers, test on another device.

The code copies, but your website never connects: activation checklist

Copying the code is only step one. SeaText’s integration guide lists a few requirements that people often skip.

Before you paste

• Create a SeaText AI account first. The guide says you need an account before you can install the script.
• Paste the JavaScript in the place your platform uses for custom scripts. On WPEngine, the guide says to download the WP Engine plugin that lets you add custom JavaScript and apply it across all your pages.

After you paste

1. Visit or refresh your website several times and stay on the page for at least 40 seconds. SeaText uses this to activate the AI and link it to your account.
2. Wait at least five minutes.
3. Open the SeaText dashboard and look for your website name next to the SEATEXT logo at the top of the page.
4. If you do not see it after 10 minutes, contact SeaText support. The guide says this may indicate an installation issue on your platform.
5. When the site is linked, go to the Main AI Hub to activate the AI on the pages you want. Use Configuration to adjust the AI parameters.

Optional editing: SeaText provides an initial round of automatic translations and variants for testing. In your account, open Variants Edit in the left panel, select the URL and language, and review or edit the variants.

Domain rules that look like copying failures

Even a perfectly copied code will not show as connected if the domain rules are wrong.

• Each SeaText account is linked to a single primary URL. You cannot use one account for two domains and expect both to connect.
• Need SeaText on multiple websites? Create one account for each website.
• Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
• Dynamic development domains may not function properly because SeaText might be unable to reliably associate traffic with your account.

If you copied the code onto a local test site, that alone can explain why nothing connects. Move the code to a real domain and repeat the activation steps.

Key facts at a glance

This guide covers the standard SeaText setup path: create an account, copy the JavaScript code, paste it on your site, and activate the AI. If your site has custom requirements beyond a normal script install, your platform may need extra steps.

Common mistakes that make the code seem broken

These mistakes trick people into thinking the copy function is at fault when the real issue is the setup.

• Treating a copied code as a finished install. Copying is the first step. You still have to paste, activate, and link the site.
• Testing on localhost. The guide restricts development URLs. Your code will not link from a local test domain.
• Using one account for staging and production. Each account is linked to one primary URL, so create a separate account for each domain.
• Skipping the 40-second activation visit. The site must be visited or refreshed several times and viewed for at least 40 seconds so SeaText can link it.
• Checking too early. The website name appears after at least five minutes, so a quick check at minute two can make a good install look broken.
• Pasting into the wrong place on WPEngine. Use the WP Engine custom JavaScript plugin applied across all pages, not just a single post.
• Copying before creating an account. Without a SeaText account you cannot complete the installation.

Limitations: when this advice does not apply

These fixes cover the normal failure modes of the SeaText integration page. A few situations are different.

• Copy fails everywhere. If the button fails in every browser, every device, and in private mode with extensions off, the issue may be on SeaText’s page itself. Try again later or contact support.
• Your editor blocks paste. If the code copies but will not paste into your code editor, the problem is the editor or its clipboard permissions, not the SeaText page.
• Aggressive caching or bot protection. Some security plugins can block the script that links your site. If activation never completes, check your security and caching plugins.
• Dynamic development domains. A domain that changes frequently may never associate traffic correctly, so the installation may not work even with correct code.

Terminology you will meet during setup

• Integration code: The JavaScript snippet SeaText gives you to place on your website.
• Clipboard: The temporary storage area your operating system uses for copy and paste.
• Primary URL: The single main domain linked to your SeaText account.
• localhost: The local development hostname on your own computer. SeaText restricts it for security.
• Main AI Hub: The SeaText dashboard area where you activate AI on chosen pages.
• Variants Edit: The SeaText panel where automatic translations and variants appear for review or manual editing.

Frequently asked questions

Why did the copy button work yesterday but not today?

A browser update or a newly installed extension can change clipboard permissions. Check the site’s clipboard setting and test in a private window with extensions disabled.

Can I copy the SeaText code by hand?

Yes. Select the code and press Ctrl+C (Cmd+C on Mac). Manual copy works when the JavaScript button is blocked. The same post-copy steps still apply: paste it in the right place, visit the site for 40 seconds, and wait at least five minutes.

I copied the code, so why does my website not show up?

Most likely you skipped the 40-second activation visit, checked before five minutes, used localhost, or used one account for two domains. Run through the activation checklist above.

Do I need a separate code for each website?

Each SeaText account is linked to a single primary URL. For multiple websites, create one account for each website and install the code for each domain.

Will pasting the code change my content immediately?

No. The installation process is secure, and the AI remains inert until activated. Your content stays unchanged until you activate the AI in the Main AI Hub.

What if my website still does not connect after 10 minutes?

The SeaText guide says to contact support immediately. A missing connection after 10 minutes may indicate an installation issue on your platform.

Where can I see SeaText pricing?

The General Integration page links to pricing. Open SeaText’s pricing page for current plans and limits.

You activate SeaText AI on specific page types by installing the JavaScript snippet site-wide, then using the Main AI Hub in your SeaText dashboard to enable agents only on the URLs or page categories you select. The AI stays inert until you turn it on for each page type, giving you full control over where each of the 20 specialized agents runs.

Prerequisites before you start

Before configuring page-type activation, complete these one-time setup steps:

• Create a SeaText AI account — each account links to a single primary domain. If you manage multiple domains (for example, a staging and a production site), you need a separate account for each.
• Install the JavaScript snippet on every page — copy the code from your SeaText dashboard and paste it into the <head> of your site template so it loads everywhere. On WP Engine, use the dedicated plugin to add custom JavaScript.
• Verify the connection — visit your site several times and stay on a page for at least 40 seconds. Wait up to five minutes for your website name to appear next to the SeaText logo in the dashboard. If it does not appear after 10 minutes, contact support.

Step-by-step: activate agents for a page type

1. Open the Main AI Hub in your SeaText dashboard.
2. Choose the agent you want to run — for example, the Google Ads Landing Page Agent, the Ecommerce Product Copy Agent, or the Website Translation Agent.
3. Click "Configuration" for that agent to adjust its parameters.
4. Select the target pages — you can specify individual URLs, URL patterns, or page categories (such as blog posts, product pages, or landing pages) where the agent should be active.
5. Save and publish the configuration. The agent will begin working only on the pages you designated.

Understanding page types and agent matching

SeaText provides over 20 autonomous agents, each designed for a specific job. Matching the right agent to the right page type is where the value lives:

• Google Ads Landing Page Agent — rewrites headlines, offers, and CTAs in real time to match the keyword that triggered the ad. Best on paid landing pages.
• Ecommerce Product Copy Agent — optimizes product names, descriptions, and CTAs. Deploy on product detail and category pages.
• Website Translation Agent — translates every page element into up to 125 languages. Enable site-wide or only on international-facing sections.
• Visitor Source Rewrite Agent — adapts copy to match the visitor's origin (Google, Meta, email, referral). Useful on high-traffic entry pages.
• AI A/B Testing Agent — generates variants and scales winners. Works on any page where you want continuous copy optimization.
• Bot Protection Agent — detects invalid paid clicks and builds refund-ready reports. Activate on pages receiving paid traffic.

You can run multiple agents on the same page type. For instance, a product page might run the Ecommerce Product Copy Agent, the Translation Agent, and the A/B Testing Agent simultaneously.

Configuration options per agent

Each agent exposes its own configuration panel in the Main AI Hub. Common settings include:

• Target URL patterns — use wildcards (e.g., /blog/*, /product/*) to capture entire page types.
• Language scope — for the Translation Agent, choose which of the 125 languages to enable.
• Aggressiveness level — for rewriting agents, control how much the AI may change headlines, body copy, or CTAs.
• Exclusion rules — prevent the agent from running on specific URLs even if they match the broader pattern.

Changes take effect immediately after you save. No code redeployment is required.

Verification: confirm the agent is live on your page type

1. Open a page that matches your target pattern in an incognito browser window.
2. Check the browser console for the SeaText initialization log — it should show the active agent IDs.
3. If the agent rewrites copy (e.g., Google Ads Agent), click a test ad and verify the headline or CTA changes to match the keyword.
4. In the dashboard, navigate to "Variants Edit" to see the generated variants for that page and language.

If nothing appears after five minutes, re-check your URL pattern and ensure the JavaScript snippet loads on that page.

Common mistake: activating before the snippet is verified

Users often configure agents in the Main AI Hub before the site connection is confirmed. The dashboard will accept the configuration, but the agents will not run because the snippet has not yet linked to your account. Always wait for the website name to appear next to the SeaText logo before setting up page-type activation.

Limitations and when this approach does not apply

• Development domains — localhost and dynamic staging URLs are restricted for security. Use a real domain (e.g., staging.yourdomain.com) with its own SeaText account.
• Single-page applications with client-side routing — the snippet must re-initialize on each route change. If your framework does not trigger a full page load, you may need to call the SeaText initialization function manually after route transitions.
• Pages behind authentication — agents cannot rewrite content they cannot crawl. Public-facing page types work best.
• One account per primary URL — you cannot manage multiple distinct domains from a single dashboard. Each domain needs its own account and snippet.

Key facts

FAQ

Can I activate different agents on blog posts versus product pages?

Yes. In the Main AI Hub, set the target URL pattern for each agent — for example, /blog/* for the AI SEO Content Factory agent and /product/* for the Ecommerce Product Copy Agent.

Do I need to reinstall the snippet when I add a new page type?

No. The snippet is installed once site-wide. You only update the agent configuration in the Main AI Hub to include the new URL pattern.

How quickly do configuration changes take effect?

Immediately after you save in the Main AI Hub. No code deployment or cache clearing is required.

Can I test an agent on a single URL before rolling it out to a whole page type?

Yes. Enter the exact URL in the agent's configuration instead of a wildcard pattern. Once verified, expand to the broader pattern.

What happens if two agents try to rewrite the same element?

Agents operate on different layers (headlines, CTAs, translations, etc.). Conflicts are rare, but you can adjust aggressiveness settings or exclusion rules to prevent overlap.

Is there a limit to how many page types I can configure?

No practical limit. You can create as many URL patterns and agent combinations as your site structure requires.

Can I use SeaText on a staging environment?

Yes, but you must use a real domain (e.g., staging.yourdomain.com) with its own SeaText account. Localhost and dynamic preview URLs are blocked.