If the SeaText AI snippet doesn't activate, the cause is usually one of a handful of repeatable mistakes: putting the code in the wrong part of the page, testing on a restricted domain, forgetting the required activation visit, or sharing one account across multiple domains. The snippet itself includes the async attribute and is versioned, so omitting async or using an old copy only happens when someone edits the provided code.

Why Installation Errors Matter

SeaText AI stays inert until the snippet loads, the domain is validated, and the activation handshake completes. A single misstep — wrong placement, invalid domain, missing account separation — means the script never registers your site. No registration means no rewrites, no translations, no bot detection, and no A/B variants. The good news: every common error leaves a clear trace in the browser console or the SeaText dashboard.

The Most Common Installation Mistakes

Mistake 1: Wrong Placement in HTML

The documentation for general integration (S1) and the BigCartel guide (S7) both say: paste the snippet inside the <head> section of your page. For single-page applications (React, Vue, Angular), the snippet goes in the <body> of index.html or the framework's initialization file. Placing it after </body> or inside a lazy-loaded component means the browser never executes it.

Check: Open DevTools → Elements → search for seatext. If the script tag isn't there, the placement is wrong.

Mistake 2: Domain and Account Configuration Errors

SeaText ties one account to one primary URL (S1, S7). Development URLs such as localhost are restricted for security. Dynamic development domains (e.g., *.ngrok.io, *.vercel.app preview URLs) may not reliably associate traffic with your account. If you run staging and production on different domains, you need two accounts.

Symptom: After 10 minutes, the dashboard still doesn't show your site name next to the SeaText logo. The fix is to register each real domain with its own account and install the snippet on each.

Mistake 3: Skipping the Activation Visit

Both S1 and S7 stress: "Visit or refresh your website several times and stay on your page for at least 40 seconds — this will activate the AI and link it to your account." Then wait at least five minutes for the site name to appear next to the logo. If it's not there after 10 minutes, contact support. Many teams deploy, see the script load in Network, and assume it's done. The 40-second dwell is the handshake that writes the local-storage ID and registers the session.

Mistake 4: SPA Framework-Specific Pitfalls

S1 gives explicit steps for React, Vue.js, and Angular. The pattern is the same: identify the entry point (index.html, main.js, main.ts), add the snippet in the <body>, then build and serve. After that, inspect Console and Network tabs for errors. A common React mistake is putting the snippet in a component that mounts after the initial render, so the script never runs on the first paint. Vue and Angular users sometimes add it to a template partial that isn't included in the built index.html.

Checklist per framework:

• React: snippet in public/index.html <body>, then npm start → DevTools → Network → confirm seatext request returns 200.
• Vue: snippet in index.html <body>, npm run serve → same verification.
• Angular: snippet in src/index.html <body>, ng serve → same verification.

Mistake 5: Cross-Origin and Local Storage Issues

S1 notes two technical requirements: the script uses localStorage to store an ID, so your site must allow local storage access (no privacy-mode blocks, no CSP storage directive denying it). If your SPA interacts with multiple domains, the SeaText script must be compatible with cross-origin requests; otherwise the ID write or the rewrite API calls will fail silently.

Quick test: In DevTools Console, run localStorage.setItem('test','ok'). If it throws, fix the storage policy before installing SeaText.

Key Facts

Limitations and When This Advice Doesn't Apply

• Server-side rendering frameworks (Next.js, Nuxt, Astro) may need the snippet in a custom _document or app.html rather than a static index.html. The source pack doesn't cover those; check framework docs.
• Content Security Policy (CSP) that blocks inline scripts or external script sources will stop the snippet. You'll need to add the SeaText domain to script-src.
• If you use a tag manager (GTM, Tealium), the snippet must fire on "Page View – All Pages" before any other marketing tags. The pack doesn't address tag-manager sequencing.
• Enterprise environments with proxy rewrites or HTML minification that strips attributes may remove async or change the script URL. Verify the delivered HTML matches the dashboard copy.

FAQ

Why does the dashboard show "Not connected" after I installed the snippet?

Either the domain is invalid (localhost, preview URL), the snippet isn't loading (wrong placement, CSP block), or you didn't complete the 40-second activation visit. Open DevTools Network and confirm a successful request to the SeaText endpoint.

Can I use one SeaText account for staging and production?

No. Each distinct domain requires its own account (S1, S7). Create a second account for the staging domain and install its unique snippet there.

Does the snippet work if I load it via Google Tag Manager?

The source pack doesn't test GTM. If you do, set the trigger to "Window Loaded" or "Page View – All Pages" with high priority so it fires before other scripts. Verify in DevTools that the script tag appears in the rendered <head>.

What if my site blocks localStorage in private/incognito mode?

The activation handshake writes an ID to localStorage. If the browser or your CSP blocks it, the AI won't link to your account. Test with localStorage.setItem('test','ok') in Console; if it fails, adjust storage permissions or CSP.

How do I know the snippet version is current?

Always copy the snippet from your SeaText dashboard right before pasting. The dashboard serves the latest version; a saved copy in a wiki or repo can go stale.

My SPA uses a custom domain for the API (different from the frontend). Will cross-origin break SeaText?

S1 flags cross-origin as a consideration. If the SeaText script makes requests to your API domain, ensure CORS headers allow the frontend origin. Otherwise, the rewrite calls may fail silently.

What should I do if the site name still doesn't appear after 10 minutes?

Contact SeaText support immediately (S1, S7). It usually means the installation on your platform has a platform-specific issue (e.g., BigCartel's "Edit Head" section, Shopify's theme.liquid, a CSP rule) that support can diagnose.

Single-page applications load once and then swap views client-side. The SeaText AI snippet is designed to run on that initial load, so any placement that ties it to a component lifecycle or skips reinitialization on navigation will stop it from working after the first view. The three core mistakes are: mounting the script in a component that unmounts, loading the snippet multiple times, and not handling route changes.

Why Script Placement Matters in SPAs

In a traditional multi-page site, the browser reloads the document on every navigation. The SeaText AI script runs, reads the URL and referrer, rewrites the page, and finishes. In an SPA, the document stays alive. The script runs once unless you explicitly tell it to run again. If the snippet lives in a component that gets destroyed when the user moves to another route, the script disappears with it. If you inject the snippet on every route change without guarding against duplicates, you load multiple copies that conflict. If you do nothing on route change, the AI never sees the new view.

The documentation notes that the snippet includes the async attribute and stores an ID in local storage. Both behaviors assume a stable document context. When that context shifts unexpectedly, the async load may race with framework bootstrap, and local storage access can throw if the new route runs in a sandboxed iframe or a different origin.

Mistake 1: Placing the Snippet in a Component That Unmounts

Developers often paste the SeaText AI snippet into a layout component, a header component, or a page-specific component. When the router swaps views, that component unmounts. The script tag is removed from the DOM. The SeaText AI instance is destroyed. Subsequent views have no script running.

Fix: Put the snippet in the static index.html file, inside the <body> tag, before the closing </body>. This is the entry point that never unmounts. The documentation explicitly says: "Insert the SEATEXT AI snippet within the body tag of your index.html file, or in the equivalent initialization section of your SPA framework." If you must load it from JavaScript, do it once in the application bootstrap file (e.g., main.js, main.tsx, app.module.ts) before the root component mounts.

Mistake 2: Loading the Script Multiple Times

Some teams add the snippet in index.html and also inject it programmatically on each route change, or they include it in every page component "to be safe." Each load creates a new SeaText AI instance. They all write to the same local storage key, overwrite each other's configuration, and fire duplicate rewrite passes. The result is flickering content, console errors, and inflated bot-detection noise.

Fix: Load the snippet exactly once. Use a guard variable or a singleton pattern if you inject it via code. For example, in your bootstrap file:

if (!window.seatextLoaded) {
  const script = document.createElement('script');
  script.src = 'https://cdn.seatext.ai/...';
  script.async = true;
  document.body.appendChild(script);
  window.seatextLoaded = true;
}

The documentation emphasizes asynchronous loading for performance. The async attribute is already on the provided snippet. Do not remove it, and do not add a second synchronous copy.

Mistake 3: Not Handling Route Changes

This is the most subtle mistake. The snippet loads once on the initial page load. The user clicks a link, the router swaps the view, the URL changes, but SeaText AI does not know. It still holds the old page's context. The AI will not rewrite headlines, offers, or CTAs for the new view. Bot detection will not run for the new paid click. Translation will not apply to new content.

Fix: Call the reinitialization method on every route change. The exact method name depends on the version, but the pattern is:

router.afterEach((to, from) => {
  if (window.seatext && typeof window.seatext.reinit === 'function') {
    window.seatext.reinit();
  }
});

If the global API is not exposed, you may need to reload the script or dispatch a custom event that the SeaText AI script listens for. Check the current integration guide for the supported reinitialization hook.

Mistake 4: Ignoring Async Loading Implications

The snippet loads asynchronously. In an SPA, the framework may bootstrap and render the first view before the SeaText AI script finishes downloading and executing. If your code tries to call window.seatext.reinit() before the script loads, you get a TypeError. If the script loads after the first render, the initial view may miss the rewrite window.

Fix: Wait for the script's load event before enabling route-change handlers. In your bootstrap:

const script = document.createElement('script');
script.src = 'https://cdn.seatext.ai/...';
script.async = true;
script.onload = () => {
  window.seatextReady = true;
  // now safe to attach router hooks
};
document.body.appendChild(script);

Then in your router hook, check window.seatextReady before calling reinit.

Mistake 5: Local Storage Permission Issues

The script stores an ID in local storage. If your SPA runs in a context where local storage is blocked (private browsing in some browsers, sandboxed iframes, certain Content Security Policy settings), the script will throw. This can silently fail the entire SeaText AI initialization.

Fix: Ensure your CSP allows localStorage access. Test in private/incognito mode. If you embed the SPA in an iframe on another domain, add allow-scripts allow-same-origin allow-storage-access-by-user-activation to the iframe sandbox attribute. The documentation warns: "Ensure that your application has the necessary permissions to access and use local storage."

Mistake 6: Cross-Origin Problems in Multi-Domain SPAs

Some SPAs serve the shell from one domain and load micro-frontends or authenticated sections from subdomains or entirely different domains. The SeaText AI script loads from the SeaText CDN. If the script tries to read referrer or UTM parameters across origins without proper CORS headers, it may get empty strings. If it tries to write local storage on a different origin, the ID becomes fragmented per origin, breaking session continuity.

Fix: Deploy the snippet on every origin that serves user-facing views. Configure each origin's SeaText AI project ID if you use multiple projects. Ensure the CDN responses include Access-Control-Allow-Origin headers that cover your domains. The documentation notes: "If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues."

Framework-Specific Placement Patterns

React

Add the snippet to public/index.html inside <body>. For programmatic loading, put the injection logic in src/index.js or src/main.tsx before ReactDOM.createRoot. Attach the reinit call in a useEffect inside your root App component that listens to router changes (React Router v6: useLocation dependency).

Vue.js

Place the snippet in index.html or load it in main.js before createApp. Use router.afterEach in router/index.js to call reinit. If you use Nuxt, add the script to app/head in nuxt.config.ts and use a plugin with nuxtApp.hook('page:finish', ...).

Angular

Add the snippet to src/index.html. For programmatic load, use APP_INITIALIZER or put it in main.ts before bootstrapApplication. Subscribe to router.events filtered for NavigationEnd to trigger reinit.

Testing and Verification Checklist

1. Open DevTools Console and Network tabs. Confirm the script loads once with HTTP 200.
2. Navigate between routes. Verify no duplicate script requests appear.
3. Check that window.seatext (or the documented global) exists after load.
4. Simulate a paid click with UTM parameters. Confirm the headline rewrites on the landing route.
5. Navigate to a second route with different UTM parameters. Confirm rewrite runs again.
6. Test in incognito/private mode. Confirm no local storage errors.
7. If you use multiple domains, test cross-domain navigation and verify the ID persists or reinitializes correctly.

Key Facts

Limitations and When This Advice Does Not Apply

• If you use a tag manager (GTM, Tealium) to fire the snippet, the tag must be configured to fire on every history change, not just page load. That setup is outside this article's scope.
• Server-side rendered (SSR) frameworks like Next.js or Nuxt with SSR enabled may need the snippet in a custom _document or app.html and reinitialization in useEffect or onMounted only on the client side.
• Micro-frontend architectures where each fragment loads its own SeaText AI instance require project-level coordination to avoid ID collisions.
• The exact reinitialization API (reinit, refresh, update) may vary by SeaText AI version. Always check the current integration guide.

FAQ

Can I put the snippet in a React useEffect with an empty dependency array?

No. That runs after the first render, but the component may unmount on route change. The script tag will be removed. Use index.html or the bootstrap file.

Does the script automatically detect SPA route changes?

No. The documentation does not claim automatic SPA detection. You must call the reinitialization method on each navigation.

What happens if I load the script twice on the same page?

Two instances compete for local storage, fire duplicate rewrites, and may cause flickering or console errors. Guard against duplicate loads.

Will SeaText AI work if my SPA is embedded in an iframe on another site?

Only if the iframe sandbox allows scripts, same-origin access, and storage access. The parent site's CSP must also allow the SeaText CDN.

Do I need a different snippet for each language or market?

No. The same snippet handles up to 125 languages. The AI detects the visitor's language and rewrites accordingly.

How do I know the script is working on a specific route?

Open DevTools Console. Look for SeaText AI log messages. Inspect the DOM for rewritten headlines. Check Network tab for calls to SeaText APIs after navigation.

Can I use SeaText AI with a Content Security Policy?

Yes, but you must add the SeaText CDN domain to script-src and connect-src directives, and allow localStorage access.

Quick answer: the required Thinkific setting

Thinkific does not have a separate "custom code injection" switch, a "third‑party scripts" toggle, or a domain‑whitelist panel for SeaText. The platform allows JavaScript in one place: the Site Footer Code field on the Code & Analytics tab under Settings. Paste the SeaText snippet there, click Save, and the integration is technically complete. The Site Header Code field exists on the same tab but loads earlier; SeaText expects the footer placement. Use Site Footer Code only.

Readiness checklist

Why the Site Footer Code field matters for SeaText

The Site Footer Code field injects content just before the closing body tag on every public page. SeaText’s agent is designed to start after the DOM is ready, so footer placement guarantees the script runs after page elements exist. Thinkific does not strip or sandbox scripts placed in this field, allowing the agent to inject variants, translations, and tracking without extra permissions. Using the footer also avoids race conditions that can happen when scripts load in the head before the page is fully parsed.

How the SeaText script executes on page load

When a visitor loads a Thinkific page, the browser parses HTML top‑to‑bottom. The SeaText snippet in the footer is encountered last. The snippet creates a small bootstrap function that waits for the DOMContentLoaded event, then loads the full SeaText runtime from the CDN. The runtime reads the account ID, initiates a WebSocket connection, and begins listening for variant and translation instructions. Because the bootstrap runs after the DOM is ready, it can safely modify headings, buttons, and forms without causing layout shifts.

Step‑by‑step configuration in Thinkific

1. Log in to your Thinkific Admin Dashboard.
2. Open Settings in the left navigation.
3. Select the Code & Analytics tab.
4. Locate the Site Footer Code text area.
5. Paste the JavaScript snippet you copied from the SeaText dashboard.
6. Click Save at the bottom of the page.

That is the entire Thinkific‑side setup. The snippet loads on every page, including course pages, landing pages, and checkout.

Trade‑offs between Footer Code and Google Tag Manager

Google Tag Manager (GTM) can also deliver the SeaText snippet via a Custom HTML tag set to fire on All Pages. GTM adds a management layer: you can version‑control the tag, preview changes, and disable it without editing Thinkific. However, GTM introduces an extra request and a potential race condition if the tag fires before the DOM is ready. The direct footer paste is simpler, has one fewer network hop, and guarantees execution order. If you already manage all marketing scripts in GTM, using GTM is acceptable; otherwise, the footer field is the recommended path.

Connecting the site in the SeaText dashboard

1. Open your SeaText account and go to the website‑linking form.
2. Enter your domain in the format www.example.com (no protocol, no trailing slash).
3. Submit the form.
4. Visit any page on your live Thinkific site and stay for at least 40 seconds. This triggers the initial handshake.
5. Wait up to five minutes (ten minutes maximum) for your site name to appear next to the SeaText logo in the dashboard. If it does not appear after ten minutes, contact SeaText support.

Deeper handshake troubleshooting

If the dashboard remains in a waiting state, first verify the snippet is present in the page source. Open the browser console and look for a message like SeaText handshake sent. Absence of that message usually means the script never executed. Common causes: ad blockers stripping the script, a Content Security Policy blocking the SeaText CDN, or the snippet being placed in the Header Code field instead of the Footer. Test in an incognito window with extensions disabled. If the handshake fires but the dashboard still shows waiting, check the Network tab for a POST to api.seatext.com/handshake returning 200. A non‑200 response indicates a server‑side issue; contact support with the request ID.

Common pitfalls and how to avoid them

• Pasting into the wrong field. The Site Header Code field exists on the same tab but loads earlier; SeaText expects the footer placement. Use Site Footer Code only.
• Using a staging or preview URL. The domain you register in SeaText must match the live domain visitors use. Preview URLs (e.g., mysite.thinkific.com) will not activate the agent for your custom domain.
• Clearing the field during theme changes. Switching Thinkific themes does not erase the Code & Analytics fields, but always verify the snippet is still present after a theme change.
• Ad blockers or browser extensions. They can prevent the 40‑second activation ping. Test in an incognito window if the dashboard stays in "waiting" state.

Verification checklist after installation

When this setup does not apply

• Thinkific Sites on a subdomain you do not control. If you cannot edit Settings → Code & Analytics (e.g., a client’s account where you only have course‑author access), you cannot install SeaText.
• Custom CSP headers added via a proxy or Cloudflare Worker. If your team has layered a Content Security Policy that blocks inline scripts or the SeaText domain, the agent will fail even though Thinkific accepted the snippet.
• Legacy Thinkific plans without Code & Analytics access. All current paid plans include the tab; very old grandfathered plans may not. Upgrade or contact Thinkific support if the tab is missing.

Terminology reference

Site Footer Code

A textarea in Thinkific’s Settings → Code & Analytics that outputs its contents just before the closing </body> tag on every public page.

SeaText snippet

A short JavaScript block unique to your SeaText account that bootstraps the AI agents, variant testing, translation, and analytics.

Handshake

The 40‑second visit that sends a ping from the browser to SeaText, linking the live domain to your dashboard.

Frequently asked questions

Do I need to enable "Custom Code" or "Advanced Settings" in Thinkific?

No. Thinkific does not gate the Site Footer Code behind a feature flag. If you see the Code & Analytics tab, you can paste the snippet immediately.

Can I use Google Tag Manager instead of the footer field?

Yes, but it adds a layer of complexity. The direct footer paste is simpler and avoids GTM race conditions. If you already manage all scripts via GTM, add the SeaText snippet as a Custom HTML tag set to fire on All Pages.

What if I have multiple Thinkific sites under one SeaText account?

Each site needs its own domain entry in the SeaText dashboard and its own snippet paste in that site’s Site Footer Code. The snippets differ by account ID, so copy each one from the corresponding SeaText project.

Does SeaText work on Thinkific checkout pages?

Yes. The Site Footer Code loads on checkout, thank‑you, and course‑player pages, so personalization, translation, and bot detection run across the full funnel.

How do I update the snippet when SeaText releases a new version?

SeaText updates the script at its CDN origin; the snippet you pasted references a stable URL. You rarely need to replace it. If SeaText support asks you to refresh, copy the new snippet from the dashboard and overwrite the old one in the same footer field.

Can I restrict SeaText to only certain pages?

Not from Thinkific. The footer field is global. Use SeaText’s dashboard configuration to disable agents on specific URL patterns if needed.

The most common mistakes when connecting several Thinkific schools to SeaText are reusing one JavaScript snippet across sites, skipping the 40-second activation visit on each domain, ignoring your plan's site limit, and forgetting that each Thinkific site needs its own SeaText configuration. Treat every school as a separate install: copy the snippet per site, paste it into each Thinkific footer, visit each URL to activate, and confirm the site name appears next to the SeaText logo before you turn on AI agents.

SeaText's Thinkific integration is built around a per-site JavaScript snippet that lives in each school's Site Footer Code field. Because that snippet is what links a Thinkific domain to your SeaText account, any shortcut you take on one school tends to break the others. The mistakes below are the ones that show up most often when operators run more than one Thinkific site through a single SeaText login.

1. Reusing the same JavaScript snippet across multiple Thinkific sites

The single most frequent mistake is copying the snippet from one Thinkific footer and pasting it into a second school's footer. SeaText's integration guide tells you to copy the JavaScript code provided by SeaText and paste it into the Site Footer Code field under Settings → Code & Analytics in each Thinkific admin dashboard. The snippet is generated per connected site, so a snippet tied to School A will not reliably activate School B, and analytics, variants, and AI agents will silently misfire on the wrong domain.

Fix: in SeaText, add each Thinkific URL separately through the integrations form, copy the snippet that appears for that specific site, and paste it only into that school's footer. Repeat for every school.

2. Skipping the 40-second activation visit on each site

SeaText requires you to visit each connected website and stay on the page for at least 40 seconds to activate the AI and link it to your account. Operators who set up several Thinkific schools in one sitting often activate only the first site and assume the rest are live. The result is that some schools show as connected in SeaText but never actually finish activation, so translations, variants, and tracking never start.

Fix: after pasting the snippet into each Thinkific footer, open that school's URL in a browser tab, stay on the page for at least 40 seconds, then wait up to 10 minutes for the site name to appear next to the SeaText logo at the top of the dashboard. If the name does not appear, contact SeaText support before moving on.

3. Ignoring your SeaText plan's site limit

SeaText caps the number of Thinkific sites you can connect based on your subscription tier. If you try to add a school beyond that cap, the connection is blocked and you either have to upgrade or remove an existing site. Operators running an agency or a multi-brand course business frequently discover this only after they have already pasted snippets into five Thinkific footers.

Fix: before you start, count the Thinkific schools you plan to connect and compare that number to your current plan's site allowance. If you are close to the limit, decide in advance which sites are highest priority so you do not have to disconnect a live school later.

4. Mixing up site settings between Thinkific schools

Each Thinkific site keeps its own SeaText configuration because settings are tied to the website URL. A common mistake is editing variants, languages, or AI agent toggles while the wrong site is selected in the SeaText header, then wondering why the changes do not appear on the school you actually wanted to update. Variants Edit, for example, asks you to select the URL and language you wish to edit, and that selection is per site.

Fix: always confirm the active site name in the SeaText header before you change variants, languages, or agent settings. Use a naming convention that matches your Thinkific school names so the selector is unambiguous.

5. Forgetting to update tracking and analytics per site

SeaText tracks results by page, keyword, version, language, and traffic source, but those reports are scoped to the connected domain. Operators who assume a single dashboard view covers all Thinkific schools often miss that one school is under-reporting because its snippet was never confirmed, or that two schools are being lumped together because the same URL was registered twice. The integration guide is explicit: linking is done per website address in the format www.example.com.

Fix: register each Thinkific domain exactly once, with the canonical URL your students actually use. After activation, open the analytics view for each site and confirm you are seeing traffic from that specific school before you draw conclusions.

6. Treating Thinkific's own multi-site rules as SeaText's rules

Thinkific's own help center explains that you can run multiple schools, but on most plans each school requires a separate Thinkific subscription, and Thinkific Plus offers multiple Environments within one account. Operators sometimes assume SeaText inherits those rules, or assume SeaText removes the need for separate Thinkific plans. SeaText does not change how Thinkific itself bills or provisions schools; it only connects to each Thinkific site you already have.

Fix: confirm your Thinkific plan covers the number of schools you intend to run, then plan your SeaText site list to match. If Thinkific requires a separate purchase per school, budget for that before you connect.

7. Activating AI agents before every site is confirmed live

SeaText lets you activate AI agents such as the Conversion Agent, Translation Agent, or Google Ads Landing Page Agent from the Main AI Hub. A frequent mistake is turning on agents site-wide while one or more Thinkific schools are still pending activation. Agents then run on the schools that are live and silently skip the ones that are not, producing uneven results across your portfolio.

Fix: finish the snippet install and 40-second activation visit for every Thinkific school, wait for each site name to appear next to the SeaText logo, and only then activate agents. If you need to roll out gradually, activate agents per site rather than across the whole account.

Diagnostic order when something looks wrong

When a multi-site Thinkific setup misbehaves, work through this order before changing settings:

1. Confirm the failing school's URL is registered in SeaText exactly once.
2. Open that Thinkific school's Settings → Code & Analytics → Site Footer Code and confirm the SeaText snippet is present and matches the snippet shown for that site in SeaText.
3. Visit the school's live URL and stay on the page for at least 40 seconds.
4. Wait up to 10 minutes and check whether the site name appears next to the SeaText logo.
5. Confirm you are still within your plan's site limit.
6. Only then open Variants Edit or the Main AI Hub and check that the correct site is selected.

Key facts

Limitations to keep in mind

SeaText does not bulk-apply changes across multiple Thinkific sites. Each school needs its own snippet, its own activation visit, and its own Variants Edit selection. There is no single switch that turns AI agents on for every connected school at once, so multi-site operators should expect a per-site rollout. SeaText also does not change how Thinkific itself provisions or bills schools; if Thinkific requires a separate plan per school, that is a Thinkific-side decision, not a SeaText one.

Frequently asked questions

Can I paste the same SeaText snippet into every Thinkific site?

No. The snippet is generated per connected site in SeaText. Paste each site's own snippet into that school's footer, not a shared one.

Do I have to visit each Thinkific site to activate it?

Yes. SeaText requires a visit of at least 40 seconds on each connected URL to activate the AI and link it to your account.

How many Thinkific sites can I connect to one SeaText account?

That depends on your SeaText subscription plan. Check your current tier's site allowance before you start adding schools.

Why are my changes showing up on the wrong Thinkific school?

You are probably editing while the wrong site is selected in the SeaText header. Variants Edit and agent settings are scoped per URL, so always confirm the active site name first.

Does SeaText replace the need for separate Thinkific plans per school?

No. SeaText connects to each Thinkific site you already have. Thinkific's own rules about separate plans or Environments still apply.

What should I do if a site name never appears next to the SeaText logo?

Wait up to 10 minutes after the activation visit. If it still does not appear, contact SeaText support, since this can indicate an installation issue on the Thinkific side.

Hydration errors in Nuxt 3 happen when the HTML generated on the server doesn't match what the client renders during hydration. SeaText causes these mismatches because its JavaScript snippet runs in the browser and rewrites page content — headlines, buttons, proof points, and translations — after the server has already sent its version of the page. Nuxt 3 compares the server-rendered DOM with the client-rendered DOM during hydration. When SeaText changes text nodes or element attributes before or during that comparison, Vue throws hydration mismatch warnings or errors.

How SeaText Integrates with Single-Page Applications

SeaText provides a JavaScript snippet designed for SPAs including React, Vue, and Angular. According to the integration documentation, the snippet loads asynchronously via the async attribute on the script tag, which helps maintain page load performance. The script stores an identifier in local storage and must handle cross-origin scenarios when an application spans multiple domains. For Vue-based frameworks like Nuxt 3, the snippet is typically added to the index.html file or the application's entry point so it loads before the Vue app mounts.

Once loaded, SeaText reads URL parameters such as utm_term or Google Ads ValueTrack tags ({keyword}) and dynamically rewrites landing page headlines, subheads, and proof points in under 15 milliseconds to match the search query. The script executes synchronously before visual paint, weighs under 15 KB, and is designed to avoid cumulative layout shift (CLS = 0). However, "before visual paint" in a traditional SPA context still means after the initial HTML has been parsed — and in Nuxt 3's SSR mode, that HTML arrives fully formed from the server.

Why Nuxt 3 Hydration Is Sensitive to Client-Side DOM Changes

Nuxt 3 renders pages on the server (SSR) by default. The server sends complete HTML to the browser. Then the client-side Vue application "hydrates" that HTML — it walks the existing DOM, attaches event listeners, and initializes reactive state. Vue expects the client-rendered virtual DOM to match the server-rendered DOM exactly. Any difference in text content, attribute values, or element structure triggers a hydration mismatch.

SeaText's rewriting mechanism operates on the live DOM. When it replaces a headline's text content or swaps a button label, it mutates nodes that Vue has already matched during hydration. If SeaText runs before hydration finishes, Vue sees a different DOM than it rendered on the server. If SeaText runs after hydration, the mutations still cause visual flicker and can break Vue's internal assumptions about DOM stability.

Common Scenarios That Trigger Mismatches

• Headline rewrites from ad parameters: A visitor arrives via Google Ads with a utm_term. The server renders the original headline. SeaText reads the parameter and rewrites the headline text before hydration completes. Vue detects a text node mismatch.
• Automatic translation: SeaText translates page content into up to 125 languages. If the server renders English but SeaText detects a different preferred language and translates headings before hydration finishes, every translated text node becomes a mismatch.
• A/B test variant injection: SeaText runs A/B tests by swapping copy variants. The server renders variant A; SeaText switches to variant B on the client. Hydration fails on every changed element.
• Local storage timing: The script stores an ID in local storage. If this read/write happens during a useHead or script setup that Nuxt serializes, it can cause serialization mismatches.

Diagnostic Sequence: Identifying the Root Cause

1. Check the browser console for hydration mismatch warnings. Nuxt 3 reports the specific element and the differing text or attribute. Note whether the mismatch involves headlines, buttons, or translated sections.
2. Disable SeaText temporarily. Comment out the snippet in app.vue or nuxt.config.ts and reload. If hydration errors disappear, SeaText is the source.
3. Inspect network timing. Open DevTools → Network. Verify the SeaText script loads with async and note its load time relative to DOMContentLoaded and Vue's hydration markers.
4. Test with client-only wrapper. Wrap SeaText-dependent components in <ClientOnly>. If errors stop, the conflict is between server-rendered content and SeaText's client mutations.
5. Check for local storage access during SSR. Search your codebase for localStorage reads in composables or plugins that run on the server. SeaText's own local storage usage runs client-side, but your integration code might not.
6. Verify cross-origin configuration. If your Nuxt app spans subdomains (e.g., app.example.com and checkout.example.com), confirm SeaText's script loads on each and doesn't hit cross-origin restrictions that delay execution into the hydration window.

Solutions and Workarounds

Defer SeaText Until After Hydration

Wrap the SeaText initialization in onMounted or use Nuxt's client-only component so the script loads and executes only after Vue finishes hydrating. This prevents SeaText from mutating the DOM during the critical hydration comparison window. The trade-off: visitors may see the original (untranslated, unpersonalized) content for a brief moment before SeaText applies its changes.

Use <ClientOnly> for SeaText-Managed Sections

Identify which page sections SeaText rewrites — typically headlines, CTAs, and proof blocks. Wrap only those sections in <ClientOnly> so the server renders a placeholder (or the default version) and the client renders the SeaText-enhanced version. This isolates hydration mismatches to known, controlled boundaries.

Pre-Render Default Variants for Critical Pages

For high-traffic landing pages, configure SeaText's default variant to match the server-rendered content exactly. When the server and client start with identical text, SeaText's subsequent rewrites happen post-hydration and won't trigger mismatches. This requires coordinating your content management with SeaText's variant settings.

Disable Translation During SSR for Specific Locales

If you serve pre-rendered pages per locale (e.g., /fr/, /de/), disable SeaText's automatic translation on those routes. Let the server-rendered translation stand. Enable SeaText translation only for routes without a dedicated locale build.

Avoid Local Storage in SSR Context

Ensure any code that reads localStorage (including SeaText's own ID storage) runs only in onMounted or behind import.meta.client guards. Nuxt 3 will error if localStorage is accessed during server rendering.

Limitations and When This Advice Does Not Apply

• Static site generation (SSG): If you use nuxt generate without SSR, hydration still occurs but the server-rendered HTML is built at compile time. The same mismatch mechanics apply, but you have more control over the initial HTML.
• Edge-side rendering or middleware rewrites: If you use Nuxt middleware or edge functions to modify HTML before it reaches the browser, SeaText's client-side changes may compound with server-side changes in unpredictable ways.
• SeaText configuration changes: The integration documentation describes the snippet's async loading and local storage usage but does not cover Nuxt-specific hydration hooks. Future SeaText releases may add SSR-aware initialization; check the documentation for updates.
• Non-Vue frameworks: This analysis applies to Nuxt 3 (Vue 3). React-based frameworks (Next.js, Remix) have different hydration models; the core conflict — client DOM mutation vs. server HTML — remains, but the diagnostic steps differ.

Key Facts

Frequently Asked Questions

Does SeaText support Nuxt 3 natively?

The current documentation covers React, Vue.js, and Angular generically but does not provide a Nuxt 3-specific integration guide. The generic Vue.js instructions apply, but Nuxt's SSR adds hydration constraints that standard SPA integration doesn't address.

Can I use SeaText with nuxt generate (static export)?

Yes. Static generation avoids SSR hydration because the HTML is pre-built. However, the client-side Vue app still hydrates on load, so SeaText mutations during that hydration window can still cause mismatches. The same ClientOnly and onMounted deferral strategies apply.

Will disabling SeaText translation fix hydration errors?

If translation is the only SeaText feature rewriting content on the affected pages, disabling it for those routes (or wrapping translated sections in ClientOnly) will eliminate the mismatches. You lose automatic localization for those pages unless you provide server-rendered translations.

Does SeaText's async loading prevent hydration issues?

Not necessarily. async means the script downloads without blocking HTML parsing, but it can still execute before hydration completes. The script's synchronous execution "before visual paint" (under 15ms) may still fall within Nuxt's hydration window, especially on fast connections.

Can I run SeaText only on the client using a Nuxt plugin?

Yes. Create a Nuxt plugin with mode: 'client' that injects the SeaText snippet. This ensures the script loads and runs only in the browser, after hydration. Example: export default defineNuxtPlugin(() => { if (import.meta.client) { /* inject script */ } }).

What if I need SeaText personalization for the first paint?

You cannot have both server-rendered personalized content and zero hydration mismatches unless the server renders exactly what SeaText would produce. Options: (1) Accept a brief flash of default content, (2) Implement server-side personalization via Nuxt middleware that mirrors SeaText's logic, or (3) Use edge rendering to inject personalized HTML before it reaches the browser.

How do I verify the fix works?

After applying a workaround, reload the page with DevTools open. Check the Console for hydration warnings — there should be none. Verify SeaText features (translation, headline rewrite, A/B variant) still function by testing with ?utm_term=test or changing browser language. Confirm no layout shift occurs (CLS remains 0).

SeaText integration on Thinkific usually fails because of a few setup mistakes. The fixes are simple. You need to place JavaScript in the right field, complete the activation visit, and use the correct code. This guide shows the most common errors and how to solve them. It follows the official SeaText Thinkific integration steps.

Why SeaText Integration Fails on Thinkific

SeaText works by loading JavaScript on your Thinkific pages. That script connects your site to your SeaText account. It lets AI agents run. Agents include the Conversion Agent, Translation Agent, and Bot Refund Agent.

If the script never loads, nothing else works. You may not see an error. The integration can fail silently. Most of the time, the cause is one of five configuration mistakes. These mistakes are easy to fix once you know where to look.

Mistake #1: Pasting the Code in the Wrong Place

SeaText must go into Thinkific's Site Footer Code field. This field is inside the Code & Analytics tab. The official setup says to open your Admin Dashboard, choose Settings, then Code & Analytics, and paste the code there.

Many users paste the JavaScript into a custom header section instead. Others put it in a blog post or a separate code injection app. The script will not load on your course pages from those places. Thinkific also runs scripts in the footer more safely. Putting the code in the head can cause rendering delays and may break activation.

Fix: go to Admin Dashboard, then Settings, then Code & Analytics. Find Site Footer Code. Paste the SeaText code. Click Save.

Mistake #2: Not Finishing the Activation Visit

Pasting the code is not enough. SeaText also requires you to visit your own site. You must stay on the page for at least 40 seconds. This visit activates the AI and links it to your account.

If you skip this step, the integration remains unconfirmed. If you leave before the timer completes, the script may not finish talking to SeaText's servers. Then your AI agents will not run.

Fix: open your Thinkific site in a browser. Wait at least 40 seconds. Do this after you save the code. For best results, use a normal browser with JavaScript enabled.

Mistake #3: Using the Wrong or Outdated Script Code

Each SeaText account generates a unique JavaScript snippet. This snippet works like an API key for your site. The code is tied to your account and your Thinkific integration.

If you use an old snippet from a different account, the integration can fail silently. The same happens if you use a previous trial code. SeaText cannot link the site to the correct account when the code is wrong.

Fix: log into your SeaText account. Go to the Thinkific integration page. Copy the JavaScript code fresh. Paste it into Thinkific's Site Footer Code field. Do not reuse code from an email or another website.

Mistake #4: JavaScript Is Disabled or Blocked on the Site

SeaText is a JavaScript snippet. If JavaScript is disabled in your browser, the snippet cannot run. Most browsers have JavaScript enabled by default. Some extensions, privacy tools, or theme settings can block it.

A Thinkific theme may also include a Content Security Policy. That policy can stop external scripts from loading. A custom JavaScript blocker can do the same. In these cases, even correct placement fails.

Fix: test your site in a normal browser with extensions turned off. Open the browser console and look for script errors. If the theme blocks JavaScript, check Thinkific's theme settings. If you use a custom domain, make sure your domain provider does not block third-party scripts.

Mistake #5: Skipping the Post-Installation Verification

SeaText gives you a clear success signal. After you finish the 40-second visit, wait at least five minutes. Then your website name should appear next to the SeaText logo at the top of the SeaText page.

Many users skip this check. They assume the integration worked because the code was saved. If the site name does not appear after 10 minutes, something is blocking activation. Waiting longer will not fix it.

Fix: check your SeaText account five minutes after install. If the site name is missing after 10 minutes, contact SeaText support. The official guide says this could indicate an installation issue and you may need their assistance.

How to Correctly Install SeaText on Thinkific: Step-by-Step

Follow this exact sequence to avoid the mistakes above.

1. Log into your SeaText account.
2. Open the Thinkific integration page.
3. Copy the JavaScript code provided there.
4. In Thinkific, go to Admin Dashboard.
5. Select Settings, then Code & Analytics.
6. Paste the code into the Site Footer Code field.
7. Click Save.
8. Visit your Thinkific site in a browser.
9. Stay on the page for at least 40 seconds.
10. Wait five minutes.
11. Check your SeaText account for your website name.

After your website name appears, go to the Main AI Hub. Activate the AI on the pages you want. Click Configuration to adjust the AI parameters. SeaText also provides an initial round of automatic translations and variants for testing.

If the site name does not appear after 10 minutes, contact SeaText support immediately.

What Happens If You Ignore These Mistakes?

If the integration is not working, SeaText agents will never activate on your Thinkific pages. You will not see changes in visitor behavior, conversion rates, or language variants. The Conversion Agent and Translation Agent depend on the script being live.

Bot protection also depends on the script. Without it, fraudulent bot clicks are not detected. You also cannot recover money lost to invalid traffic. Time spent on other settings is wasted until the core integration works.

Key Facts About SeaText Thinkific Integration

Here are the important facts from the official SeaText integration guide.

Limitations: When This Advice Doesn't Apply

These fixes cover common errors, not every possible failure. If your Thinkific theme has a custom JavaScript blocker or Content Security Policy, even correct placement may not load SeaText.

If you use a Thinkific subdomain with an older plan, the Site Footer Code field may be restricted. Check Thinkific's plan features. A custom domain with a paid plan gives you more control. If you still see problems, contact SeaText support. They can check the installation from their side.

Frequently Asked Questions

Why do I need to stay on my site for 40 seconds?

The visit confirms your site is live and accessible. It triggers SeaText to link the domain to your account. The 40-second dwell time lets the script fully load and communicate with SeaText's servers.

Can I paste the SeaText code in the head section instead?

No. SeaText's script is designed to load in the footer. Thinkific's official integration points to the Site Footer Code field. Placing the code in the head can cause rendering delays and may break the activation sequence.

What if my site name doesn't appear after 10 minutes?

Something is blocking activation. Double-check the code placement and the 40-second visit. Make sure JavaScript is not disabled in your browser or theme. Then contact SeaText support immediately.

Do I need a specific Thinkific plan?

You need a plan that allows custom code in the site footer. Most paid Thinkific plans support this. The free plan may not include the Code & Analytics section. Check with Thinkific for plan details.

My site name appears. Why are my agents not active?

Linking the site is not the same as activating an agent. After the site appears, go to the Main AI Hub and activate the AI on the pages you want. Use Configuration to adjust the AI parameters. This is the next step after installation.

Where can I edit the translations SeaText creates?

Log into your SeaText account. Navigate to Variants Edit in the left panel. Select the URL and language you want to edit. You can review, create, or manually edit translations there.

Can I integrate SeaText with multiple Thinkific sites?

Yes. Each site needs its own JavaScript snippet from your SeaText account. You manage multiple sites from the same account. Follow the same install and activation steps for each site.

SeaText won't show translations on your Thinkific course pages when the JavaScript snippet never runs, or when the AI is not activated for that page. The most common installation causes are the footer code not being saved in Thinkific's Site Footer Code field, a script blocker or content security policy preventing the snippet from loading, and the activation visit not being completed. Even if the script loads, you also need a language selector or translation control enabled in SeaText, otherwise the translations can exist without any visible way for a student to trigger them.

Thinkific itself will not tell you that SeaText failed. The page simply stays in its original language. That makes it look like the translation feature is broken when the real issue is usually one of three things: the code is not on the page, the account link is incomplete, or the AI is not active for the page. The sections below walk through these causes in the order that finds the problem fastest.

Why a missing script produces missing translations

SeaText is installed as JavaScript in the Site Footer Code field of your Thinkific admin. That code is loaded by the browser on every page that uses your site footer, including course pages. When it runs, it can rewrite the visible text, headline, buttons, and offer to match the visitor's language and source. When it does not run, the original page remains.

This is the trade-off of client-side translation. It lets one Thinkific page serve many languages without creating separate course sites. The cost is that the translation depends on the script executing. A content security policy that blocks third-party scripts, an aggressive ad blocker, a caching layer that serves an old page, or a theme that strips footer scripts can all stop the script before it starts.

The consequences are not just visual. If the script does not load, students never see a language selector, so you cannot tell whether the problem is the script or the configuration. You also cannot trust a quick look at the page as proof that SeaText is broken. You need to verify the script is running first.

The fastest diagnostic sequence for Thinkific

Use this order. It separates script-loading problems from configuration problems.

1. Open one course page in a private browser window and view the page source. Search for a string from your SeaText snippet. If the code is missing, go back to Thinkific Admin > Settings > Code & Analytics > Site Footer Code, paste the snippet, and click Save.
2. If the code is present, check for a blocked script. Open the browser console and look for a message that says a script was blocked by a content security policy. If you see one, add SeaText's script source to the allowlist or ask whoever manages your security headers to do it.
3. Complete the account link. Visit your site once and stay on the page for at least 40 seconds. Wait five minutes, then check the SeaText dashboard for your site name next to the SeaText logo. If it has not appeared after 10 minutes, contact support.
4. Activate the AI. Go to the Main AI Hub and activate the AI on the pages you want translated. This step is separate from installing the script.
5. Enable or check the language selector. If no visible language control is turned on, the translation engine may be running but no button or menu is available to switch languages.
6. Edit a variant. In the left panel, open Variants Edit, select the URL and language, and see whether a translation exists. If it exists, the AI produced content but the page is not displaying it. If it does not exist, the AI was not activated or the link is incomplete.

What SeaText actually does on a Thinkific page

SeaText doesn't create a second Thinkific site. It uses the page you already have and swaps the text in the browser. This is why "no translations" usually means "no script execution," not "no translation capability."

After the code is installed, the AI provides an initial round of automatic translations and variants for testing. You can review and edit them in Variants Edit by selecting the URL and language. Translations can exist in your SeaText account and still not appear on your public page if the script is blocked or the AI is not active for that URL.

SeaText can translate pages, headlines, buttons, and offers into up to 125 languages. That is broader than Thinkific's built-in language support, which mainly controls system text such as default button labels. If you see some translated system text but not your course content, the SeaText script is likely not loading or not activated.

Key facts from the Thinkific integration

Use these source-pack facts as your checklist.

Common causes and their fixes

Not every "no translation" problem has the same fix. Match the symptom to the likely cause first.

Thinkific's own language settings vs SeaText

Thinkific has its own multi-language settings. They control the default site language and allow students to override it based on their language preference. Thinkific's documentation says those language settings apply to site default text only, including text like default Buy buttons.

That creates a common confusion. If Thinkific changes the language of its system text but your course content stays in English, that is not SeaText failing. It just means the platform-level language setting is working, and the SeaText script is either not installed, blocked, or not activated for that page.

Use Thinkific's built-in settings for platform chrome, and SeaText for the actual course content, sales pages, headlines, buttons, and offers. If the two are misaligned, a student might see an English Buy button next to a translated page, or the reverse. That mismatch is often a clue about which layer is doing the translation.

When this diagnostic advice doesn't apply

Suppose you pasted the code, completed the activation, activated the AI, and the language selector is on. Then a different problem is likely.

The advice above assumes you are using SeaText's standard Thinkific footer-code integration. If you added the code through a tag manager, a custom theme, or a caching layer, the order changes. You should first check that the final rendered page contains the script, because a tag manager or theme can add the code to some templates and not others.

Also, if you are testing while logged in as an admin, you may see different behavior than your students. Some browsers block third-party scripts on embedded course players, and some course pages are served from a different subdomain. Test the public URL in an incognito window with all extensions disabled. If it works there, the problem is on your testing side, not the integration.

Frequently asked questions

How long after installing SeaText should translations appear?

Plan for two waiting periods. The first is the activation visit: stay on your page for at least 40 seconds. The second is the account link display: wait about five minutes for your site name to appear. If it still has not shown after 10 minutes, contact SeaText support.

Do I need to create separate Thinkific course pages for each language?

No. SeaText is designed to use your existing page and product context to create localized versions in up to 125 languages, without a separate site for each market. You can edit those variants from your SeaText account.

Why can I see translations in the dashboard but not on the page?

The translation engine has produced content, but the visible page has not run the script. Check that the footer snippet is present on that specific URL, that no script blocker is interfering, and that the AI is active for the page. Then test in a private window.

What is the difference between Thinkific's language setting and SeaText?

Thinkific's language setting controls default site text, such as system labels and buttons. SeaText handles the page copy, headlines, offers, and calls to action. They solve different layers of the same problem.

How do I edit a translated version after the AI creates it?

In your SeaText account, go to Variants Edit in the left panel, select the URL and the language you want to edit, and review or manually edit the translations there.

What should I do if the course page still won't translate after all these checks?

Follow the same diagnostic sequence on that exact URL: confirm the script is in the rendered source, confirm no console error, confirm the site is linked, confirm the AI is activated, and confirm a language selector is available. If every check passes, contact SeaText support with the URL and the console output.

When you add the SeaText AI snippet to a site — especially a single‑page application — the first thing you need to know is whether the script actually loaded, whether it threw any errors, and whether it can read and write the local storage key it uses for its internal ID. The three tabs that answer those questions directly are Network, Console, and Application. Network shows the request for the SeaText script, its status code, timing, and any redirect or CORS issues. Console surfaces JavaScript errors, SeaText’s own diagnostic logs, and any content‑security‑policy violations. Application lets you inspect the local storage entry SeaText creates, verify its value, and clear it when you need a clean slate.

Why the right dev‑tools tabs matter for SeaText AI

SeaText AI runs as a lightweight client‑side script that rewrites page text, manages translation variants, and coordinates A/B tests — all in the browser. If the script fails to load, if a CSP header blocks it, or if local storage is unavailable (private browsing, cross‑origin iframe, or a storage quota exceeded), the AI simply stays inert. The documentation explicitly tells you to "check the Console and Network tabs to verify that the SEATEXT AI script loads without errors" after you build and serve your SPA. That guidance points straight to the two tabs that reveal load‑time problems. The third tab, Application, is implied by the fact that SeaText "stores an ID in the local storage" and that you must "ensure your application has the necessary permissions to access and use local storage." Together, these three panels give you a complete picture of load, execution, and persistence.

Network tab — confirm the script arrives intact

Open the Network tab, filter for "JS" or type "seatext" in the filter box, then reload the page. You should see a request for the SeaText snippet (the URL contains your account identifier). Check the status column: 200 means the script downloaded; 304 means it was served from cache; anything in the 400 or 500 range means the edge server or your proxy blocked it. Look at the Initiator column — it should show the script tag you placed in index.html or your framework’s entry point. If the request is red, click it and inspect the Response headers for Content‑Security‑Policy or X‑Frame‑Options that could prevent execution. The Timing breakdown tells you whether the async attribute on the snippet is doing its job — SeaText’s snippet includes async so it shouldn’t block paint, but a long TTFB (time to first byte) can still delay the AI’s first rewrite.

Console tab — catch runtime errors and SeaText logs

After the script loads, switch to the Console tab. Errors appear in red; SeaText’s own diagnostic messages appear as regular log lines (often prefixed with a namespace like [SeaText]). Common issues you’ll see here:
• CSP violations — "Refused to load the script because it violates the following Content Security Policy directive…"
• Cross‑origin errors — "Access to script at '…' from origin '…' has been blocked by CORS policy" — this matches the documentation’s warning about cross‑origin considerations when your SPA interacts with multiple domains.
• Local storage failures — "Failed to read the 'localStorage' property from 'Window': Access is denied for this document" — typical in Safari private mode or inside a sandboxed iframe.
• Initialization timeouts — SeaText expects you to "visit or refresh your website several times and stay on your page for at least 40 seconds" to activate the AI. If the Console stays quiet after that window, the script may have loaded but failed to handshake with the backend.

Application tab — verify local storage state

SeaText writes an identifier into localStorage (key typically named seatext_id or similar). Open Application → Local Storage → your origin. You should see that key with a non‑empty value. If the key is missing, the script either hasn’t run its initialization block or local storage is blocked. If the key exists but the value looks malformed, clear it (right‑click → Delete) and reload — this forces a fresh handshake. The Application tab also shows IndexedDB and Cookies; SeaText doesn’t use those today, but checking them rules out storage‑quota conflicts that could silently prevent the local storage write.

Other tabs that occasionally help

• Sources — Set a breakpoint inside the SeaText snippet (pretty‑print first) if you need to step through the initialization logic or see why a variant isn’t applying.
• Elements — Inspect the DOM after SeaText rewrites text; you’ll see the original nodes replaced or wrapped with data attributes that SeaText uses for tracking.
• Performance — Record a short profile to confirm SeaText’s synchronous execution stays under the documented 15 ms budget and doesn’t introduce layout shifts (CLS = 0).

These tabs are secondary — use them when the big three don’t explain the symptom.

Step‑by‑step debugging workflow

1. Open DevTools (F12) and dock to the side so you can see the page.
2. Go to Network → filter "JS" → reload. Confirm a 200/304 for the SeaText script.
3. Switch to Console. Look for red errors or SeaText log lines. No errors? Good.
4. Open Application → Local Storage → your origin. Verify the SeaText ID key exists.
5. Stay on the page for 40 seconds, then wait up to 5 minutes. The SeaText dashboard should show your site name next to the logo — this is the "activation" signal from the docs.
6. If the dashboard still doesn’t show the site, re‑check Console for handshake errors and Network for any failed POST to SeaText’s API endpoint.

Common failure patterns and what they look like in each tab

Limitations of this guidance

The three‑tab approach covers the client‑side integration path documented by SeaText. It does not cover server‑side rendering issues (SeaText runs in the browser only), backend API latency, or dashboard‑side configuration errors such as an incorrect AI scope setting. If the script loads, logs cleanly, and local storage is healthy but the dashboard still shows "disconnected" after 10 minutes, the documentation advises contacting support — that is a server‑side or account‑linking issue outside dev‑tools visibility.

Key facts from SeaText documentation

FAQ

Do I need to check the Application tab on every deploy?

Only if you suspect local storage issues — private browsing, new domain, or after clearing site data. A quick glance at the SeaText key takes seconds.

What if the Network tab shows the script but Console is empty?

That usually means the script downloaded but hasn’t executed its init block yet. Wait the 40‑second activation window; if still silent, open Sources, pretty‑print the script, and set a breakpoint at the first line of SeaText’s IIFE.

Can I debug SeaText in a Safari Web Inspector session on iOS?

Yes. Connect the device, open Safari’s Develop menu, and you’ll see the same Network, Console, and Storage tabs. Local storage behavior on iOS private mode is stricter — expect the "access denied" error there.

Does SeaText write to IndexedDB or cookies?

Current documentation only mentions local storage. If you see SeaText keys in IndexedDB or cookies, they’re from a different tool or a future release — treat them as unrelated.

What CSP directives commonly block SeaText?

script-src without the SeaText domain, connect-src missing the API endpoint, and frame-ancestors if you load the snippet inside an iframe. Add the SeaText origins to each directive.

How do I know the script is the latest version?

Network tab → click the script request → Response tab shows the source. Compare the version comment at the top (if present) with the version noted in your SeaText dashboard.

When should I contact support instead of debugging further?

After you’ve confirmed: script loads 200, Console shows no errors, local storage key exists, you’ve waited 10 minutes, and the dashboard still doesn’t list your site. The docs say "contact our support team immediately" at that point.

Why SeaText Might Be Missing After Installation

You followed the integration steps, but the SeaText widget doesn't show on your Thinkific course pages. The cause is usually one of four things: the script wasn't pasted correctly in Thinkific's Site Footer Code field, the domain linking step didn't complete (you need to visit your site and stay for 40 seconds), your pages are cached, or you haven't activated the AI agent on the course pages. Each cause has a different fix, so working through them in order saves time.

How SeaText Integrates with Thinkific

SeaText uses a JavaScript snippet that you paste into Thinkific's Site Footer Code field (Settings > Code & Analytics). This script loads the SeaText AI on every page. After pasting the code, you must link your website by adding the domain in the SeaText dashboard, then visiting your site and staying on the page for at least 40 seconds. This visit triggers the activation. Finally, you wait up to 5 minutes for the site to appear in your dashboard. Once linked, you need to activate the specific AI agents on the pages where you want them to appear. If any of these steps is missed or incomplete, the widget won't show.

Diagnostic Sequence

Work through these steps in order to find the problem.

1. Check the script placement – Log into your Thinkific admin, go to Settings > Code & Analytics, and look at the Site Footer Code field. Make sure the entire SeaText JavaScript snippet is there, with no missing characters. If you see any other code that might conflict, move the SeaText snippet to the end.
2. Verify domain linking – In your SeaText dashboard, confirm that your website domain is listed. If it's not, you have not completed the activation visit. Go to your live course page, stay on the page for at least 40 seconds, then return to the dashboard and wait 5 minutes. If the domain still doesn't appear, contact SeaText support.
3. Clear your cache – Thinkific caches pages. After installation, clear your browser cache and any CDN cache (like Cloudflare). Also, try viewing the page in an incognito window or a different browser to see if the widget loads.
4. Confirm AI activation on course pages – Even if the script is installed, the widget only appears on pages where you've activated the relevant AI agent. In the SeaText dashboard, go to the Main AI Hub and check that an agent (e.g., Conversion Agent or AI SEO Content Factory) is turned on for the specific course page URLs. If not, activate it.
5. Check for other script conflicts – Some Thinkific themes or custom code may block the SeaText script. Temporarily disable any other JavaScript from third-party services to see if the widget appears. If it does, you'll need to resolve the conflict.
6. Contact support – If you've completed all steps and the widget still doesn't appear, reach out to SeaText support. They can check your account and verify the installation. The SeaText integration page notes: "If you do not see it at the top of the page after 10 minutes, please contact our support team immediately."

Common Mistakes and Trade-offs

Incorrect Script Placement

Thinkific's Site Footer Code field expects clean JavaScript. If you paste the snippet with extra spaces or line breaks, or if you accidentally delete part of it, the script won't execute. Always copy the code directly from the SeaText dashboard and paste it without modification.

Missing Activation Visit

Many users skip the step where you must visit your site and stay for 40 seconds. This is essential because it tells SeaText that the site is live and ready to receive AI content. Without that visit, the domain remains unlinked and the widget won't appear.

Caching

Thinkific caches pages to improve load speed. If you installed the script but the widget doesn't show, caching might be serving an old version of the page. Clearing your cache and waiting a few minutes usually resolves this.

AI Agent Not Activated

Even after correct installation, the widget only appears on pages where you've explicitly turned on a SeaText agent. If you installed the script but didn't configure any agents, nothing will show. Go to the "Configuration" area in the SeaText dashboard to activate the AI for your course pages.

Key Facts for SeaText Thinkific Integration

Limitations and When This Advice Doesn't Apply

This diagnostic guide assumes you have the correct SeaText account and that Thinkific is your only platform. If you are using a custom domain or a subdomain that is not properly configured, the script may not load. Additionally, if you have other JavaScript errors on your Thinkific site, they can prevent the SeaText script from running. This guide does not cover issues with Thinkific's free plan limitations (some plans restrict code injection) or conflicts with other third-party apps. If you have a complex setup, consider contacting SeaText support for personalized help.

Frequently Asked Questions

Why did my SeaText widget appear for a moment and then disappear?

This is often caused by a caching issue. Clear your browser cache and check again. If the widget still disappears, another script on your site may be removing it.

Do I need to activate SeaText on every course page individually?

Yes, you need to configure which pages the AI agents should run on. You can do this in the SeaText dashboard under "Configuration" or by selecting the specific URLs you want to target.

How long does the activation visit take?

You need to stay on your site for at least 40 seconds. After that, wait up to 5 minutes for the dashboard to update. If it takes longer, there may be an issue with the installation.

Can I use SeaText on Thinkific without a custom domain?

Yes, SeaText works with the default Thinkific subdomain (e.g., yoursite.thinkific.com) as long as you add that exact URL in the dashboard.

What if I see the SeaText script in the page source but the widget still doesn't appear?

This usually means the script is loaded, but the AI agent isn't activated for that page. Check the SeaText dashboard to confirm activation.

Does SeaText affect Thinkific page load speed?

SeaText is designed to run efficiently and should not significantly slow down your pages. If you experience issues, check for other scripts that might be causing conflicts.

How SeaText Can Help

SeaText provides a straightforward integration process for Thinkific, with clear step-by-step instructions. The SeaText dashboard includes a domain linking tool and a configuration area where you can activate AI agents on specific pages. If you run into problems, the support team is available to help troubleshoot directly. The key requirement is that you correctly paste the JavaScript snippet and complete the activation visit. Once everything is set up, SeaText runs autonomously to optimize your course pages for conversions, SEO, and visitor engagement.

The short answer: SeaText variants are not showing because SeaText has not been allowed to run on that exact Thinkific page. SeaText changes text in the browser using a JavaScript snippet placed in Thinkific's site footer. If the snippet is missing, the page was never activated, or the variant is saved under a different URL or language, the original Thinkific copy stays visible.

There is usually nothing wrong with the variant itself. The problem is in the connection between SeaText and the page. This article explains the likely causes and gives you a diagnostic order.

What has to happen for a variant to appear

SeaText works as a client-side text engine. It does not rewrite Thinkific's saved page content. When a visitor opens a landing page, the SeaText script loads from the page footer, checks the URL and language rules you set in Variants Edit, and swaps the text in the browser.

This design has a real trade-off. You do not need to create one Thinkific page per variant. SeaText modifies the page text in the browser on your single canonical landing page URL. The same URL can show different text under different conditions.

That same flexibility has a cost. A small misconfiguration leaves the original copy in place. If you ignore this, your A/B test or translation run can seem to produce no data because the variant was never served.

The diagnostic sequence

Work through these checks in order. Stop when you find the broken step.

1. Confirm the JavaScript is in Thinkific's site footer. In your Thinkific Admin Dashboard, open Settings, then the Code & Analytics tab. Check the Site Footer Code field. The SeaText code must be there and saved.
2. Activate the live page. Visit the Thinkific page once and stay there for at least 40 seconds. This activates the AI and links it to your account.
3. Wait for the website name. In SeaText, wait at least five minutes. The website name should appear at the top of the page.
4. Check the variant mapping. Open Variants Edit in the left panel and select the exact Thinkific URL and language you are testing.
5. Bypass the cache. Hard-refresh the page or open it in a private browsing window.
6. Contact support if it still fails. If the website name does not appear after 10 minutes, the integration instructions say to contact support immediately.

Cause 1: The Thinkific site footer code is missing or not saved

The most common cause is the simplest one. SeaText installs through JavaScript, and Thinkific places custom JavaScript in Settings, Code & Analytics, Site Footer Code. If that code is not there, SeaText never loads on the landing page.

Paste the code exactly as SeaText provides it, then click Save. A common mistake is to save the Thinkific page but forget to save the footer code field.

Cause 2: The page was never activated or linked

Installing the JavaScript is only half of the setup. SeaText says you must visit your website once and stay on the page for at least 40 seconds. This step activates the AI and links it to your account.

After that, wait at least five minutes, then check that your website name appears next to the SeaText logo. If the name never appears, SeaText is not connected. No variant can show until this link exists.

Cause 3: The variant is mapped to the wrong URL or language

Variants Edit is where SeaText knows which page you want to change. In the left panel, you select a URL and a language. If you select a different Thinkific page URL, or the wrong language version, the variant will not show on the page you are checking.

Check the URL in the browser address bar. Compare it with the URL selected in Variants Edit. They need to match exactly.

Cause 4: Caching makes the original text look unchanged

SeaText works on the public, rendered page. Your browser may still show an older copy of that page from cache. A hard refresh or a private browsing window is a quick way to rule this out.

Also check the public URL, not Thinkific's page builder. SeaText replaces text for visitors, so the Thinkific editor will still show the original saved copy.

Key facts: SeaText and Thinkific integration

Limitations: when this advice does not apply

• SeaText does not edit stored Thinkific content. If you inspect the page source outside the browser, you will see the original copy, not the variant.
• Thinkific has its own site text controls. Thinkific's Modify Text and Theme Settings can change the same labels. If both systems target the same element, check which one applies last.
• The page must be publicly visitable. A preview mode or a page hidden behind a login may not count as the activation visit.
• Editing a variant is not the same as activating a page. Both steps are required.

Terminology

• Variant - an alternate version of page copy that SeaText can show in the browser.
• Variants Edit - the SeaText panel where you choose a URL and language and review, create, or edit variants.
• Activation - the 40-second page visit that links SeaText to your website and account.
• Site Footer Code - the Thinkific setting where the SeaText JavaScript snippet belongs.
• Client-side - changes happen in the visitor's browser after the page loads.

FAQ

Why did my variant save but still not appear?

Check the URL and language in Variants Edit. The saved variant may be attached to a different Thinkific page, language, or version than the one you opened.

How long should I wait after installing SeaText?

The integration instructions say to wait at least five minutes for the website name to appear. If it does not appear within 10 minutes, contact support.

Do variants show in Thinkific's page builder?

No. SeaText swaps text for visitors in the browser. Thinkific's editor and stored page source will still show the original copy.

Can caching hide a variant?

Yes. Try a hard refresh or a private browsing window. If a CDN or caching layer is in front of your site, flush that cache as well.

Do I need the premium plan to see Variants Edit?

The free starter includes 8 AI agents. The premium plan includes all 20+ agents for $59/month. If Variants Edit is not visible, check which agents are active on your plan.

What should I do if the website name never appears in SeaText?

Contact SeaText support immediately after 10 minutes. The integration guide says this could indicate an installation issue on your platform.

The SeaText AI snippet usually fails to fire on specific pages for one of three reasons: a security policy is blocking the script, the script is being removed or overwritten by the page template, or the script is loading after the moment it needs to run. Each cause needs a different fix, so the first job is to identify which layer is blocking execution.

Start by opening the affected page in a browser, opening Developer Tools (F12), and looking at the Console and Network tabs. If the snippet is not present in the source, the page template is the problem. If it is present but blocked, a Content Security Policy or extension is the problem. If it loads but does nothing, the timing or the account binding is the problem.

How the SeaText AI snippet is supposed to fire

The SeaText AI snippet is a small JavaScript file that you paste into your site. According to the SeaText general integration documentation, the snippet uses the async attribute so it loads without blocking the rest of the page. Once loaded, it stores an identifier in the browser's local storage and then communicates with the SeaText service to apply any active variants or translations for that page.

For single-page applications built with React, Vue, or Angular, the snippet is placed inside the body tag of the main HTML file or in the framework's initialization section. The documentation notes that the snippet must be able to read local storage and must not be blocked by cross-origin restrictions when the SPA talks to multiple domains.

The three main reasons the snippet does not fire

1. Content Security Policy or script blocker is rejecting the script

A Content Security Policy (CSP) is a header that tells the browser which scripts are allowed to run. If your CSP does not include the SeaText domain, the browser silently blocks the snippet. Ad blockers, privacy extensions, and some corporate firewalls do the same thing. The script never runs, so no variants appear and no events are tracked.

To check this, open the Network tab in Developer Tools, filter by "JS", and look for the SeaText request. If it shows a red status or a "blocked" label, the CSP or an extension is the cause. You will need to add the SeaText domain to your CSP allowlist or test the page in a private window with extensions disabled.

2. The snippet was removed or never reached the page

Many site builders, themes, and tag managers strip out scripts they do not recognize, or they only inject scripts on certain page templates. If the snippet is missing from the page source, the AI cannot fire no matter what else is correct. This is the most common cause when the snippet works on the homepage but not on product pages, checkout pages, or blog posts.

Open the page source (Ctrl+U or Cmd+U) and search for "SEATEXT" or the snippet identifier. If it is not there, the integration code did not reach that template. For Bigcartel, for example, the snippet must be pasted into the "Edit Head" section under Design, and the change must be published. Other platforms have similar template-specific fields.

3. Load order or timing prevents the snippet from running

The snippet depends on local storage and on the page being live long enough for the SeaText service to register the visit. The Bigcartel integration guide notes that you must visit or refresh the page and stay for at least 40 seconds to activate the AI and link it to your account. If the snippet loads after the page has already rendered key content, or if the visitor leaves too quickly, the AI may appear to do nothing.

For SPAs that change content without a full page reload, the snippet must be present at the initial mount point. If it is added inside a component that unmounts during navigation, it will not persist across route changes.

Diagnostic sequence: how to find the real cause

Work through these checks in order. Each step rules out one layer of the problem.

1. View source on the affected page. Search for the SeaText snippet. If it is missing, the template is the problem.
2. Open Developer Tools and check the Console. Look for CSP violations, mixed-content warnings, or script errors tied to SeaText.
3. Check the Network tab. Confirm the SeaText script file is requested and returns a 200 status. A blocked or failed request points to CSP or extensions.
4. Test in a private window with extensions off. If the snippet fires here but not in a normal window, an extension is blocking it.
5. Wait at least 40 seconds on the page. The SeaText service needs dwell time to register the visit and activate the AI.
6. Check the SeaText dashboard. After about five minutes, the connected website name should appear next to the SeaText logo. If it does not, the integration is not bound to your account.

Common mistakes that look like snippet failures

• Pasting the snippet into the wrong template field, so it only appears on one page type.
• Editing the theme or template after integration, which removes the snippet without warning.
• Using a development URL such as localhost, which SeaText restricts for security reasons.
• Running multiple accounts on the same domain, which prevents the snippet from binding to any one account.
• Adding the snippet inside a component that unmounts during SPA route changes.

Limitations of this diagnosis

This troubleshooting flow covers the most common causes based on the SeaText general integration documentation and the Bigcartel integration guide. It does not cover every platform-specific edge case. If the snippet is present, not blocked, and the page is loaded for more than 40 seconds, but the AI still does not fire, the issue may be account-level and should be raised with SeaText support.

SeaText also restricts development URLs and dynamic development domains for security reasons, so local testing will not always reflect production behavior. Use a real, valid domain when verifying the integration.

Key facts about the SeaText AI snippet

Frequently asked questions

How do I know if a Content Security Policy is blocking the snippet?

Open Developer Tools, go to the Console tab, and reload the page. A blocked script will produce a CSP violation message that names the blocked domain. You can also check the Network tab for a failed or blocked request to the SeaText script.

Why does the snippet work on the homepage but not on product pages?

Most likely the snippet was added to one template only. Site builders often have separate templates for the homepage, product pages, blog posts, and checkout. The snippet must be added to every template you want the AI to run on.

Can an ad blocker stop the SeaText snippet from firing?

Yes. Privacy and ad-blocking extensions can block third-party scripts by default. Test the page in a private window with extensions disabled to confirm whether an extension is the cause.

Does the snippet need to be inside the head tag?

For standard sites, the snippet is typically placed in the <head> section. For SPAs, the SeaText documentation says to place it inside the body tag of the main HTML file or in the framework's initialization section.

How long should I wait before assuming the snippet is broken?

The Bigcartel integration guide recommends waiting at least five minutes after installation to see the website name appear next to the SeaText logo. If it does not appear after ten minutes, contact support.

Can I use the same SeaText account on a development domain?

No. SeaText restricts development URLs such as localhost for security reasons, and dynamic development domains may not bind reliably. Use a separate account for each real domain.

What should I do if none of these checks find the problem?

If the snippet is present, not blocked, the page is loaded for more than 40 seconds, and the dashboard still does not show the website, the issue is likely account-level. Contact SeaText support with the page URL and a screenshot of the Console and Network tabs.

Why translation customizations break on Thinkific

SeaText installs on Thinkific through a single JavaScript snippet pasted into the Site Footer Code field (Settings → Code & Analytics). Once the snippet loads, SeaText crawls the page, detects translatable text, and serves translated variants from its own dashboard. The integration itself is straightforward, but the hand‑off between Thinkific’s cached pages and SeaText’s variant engine creates three predictable failure points.

Mistake 1: Editing a variant but not publishing it

In the SeaText dashboard you open Variants Edit, choose a URL and language, change the text, and hit Save. That save only stages the change. Until you click Publish for that language, the live site continues to serve the previous version — or falls back to the source language. The symptom is simple: you see your edit in the dashboard but the storefront still shows the old copy.

Fix: After every edit, use the Publish button for the specific language. Confirm the status badge reads “Published” before you test the front end.

Mistake 2: Placeholder tokens that don’t match the source

SeaText preserves dynamic placeholders — things like {{course_name}}, {student_email}, or Thinkific’s own liquid‑style tokens. If the translated string changes the token spelling, adds spaces, or drops the braces, the runtime cannot replace the token. The result is visible placeholder text on the page or a broken layout where a variable should be.

Fix: Copy the exact token from the source string into the translation. Do not translate the token itself. If the source reads Welcome {{student_name}}!, the Spanish version must keep {{student_name}} unchanged.

Mistake 3: Skipping the Thinkific cache clear

Thinkific caches rendered pages aggressively. Even after SeaText publishes a new variant, the Thinkific edge cache may serve the old HTML for minutes or hours. Visitors see stale translations while the dashboard shows the new ones.

Fix: In Thinkific admin, go to Settings → Code & Analytics and use the “Clear cache” link (or wait for the automatic TTL to expire). Then reload the page in an incognito window to verify the new variant appears.

Mistake 4: Not completing the activation handshake

After pasting the JavaScript, SeaText requires a live visit of at least 40 seconds to register the domain. The dashboard will not show the site as “connected” until that visit happens and a five‑minute propagation window passes. Editors who start translating before the handshake finishes often find their variants never activate.

Fix: Immediately after saving the footer code, open your Thinkific site in a browser, stay on the homepage for 40 seconds, then wait five minutes. Confirm the site name appears next to the SeaText logo in the dashboard before you begin editing variants.

Mistake 5: Pasting the snippet in the wrong field

The integration guide specifies the Site Footer Code field under Settings → Code & Analytics. Pasting into Header Code, Page Footer, or a theme liquid file either prevents the script from loading on all pages or causes duplicate execution. Both break translation coverage.

Fix: Use only the Site Footer Code field. Verify the script tag appears once in the rendered page source (view‑source) before you activate any AI agents.

Mistake 6: Editing the wrong URL or language scope

SeaText’s Variants Edit panel lets you filter by URL and language. A common slip is editing the English “source” variant instead of the target language, or editing a course landing page URL while the checkout page uses a different path. The translation then never appears where you expect it.

Fix: Before editing, confirm the URL path matches the page you’re testing (include query strings if SeaText treats them as separate entries). Select the target language from the dropdown, not the default language.

Pre‑publish verification checklist

1. JavaScript snippet saved in Thinkific Site Footer Code.
2. Visited site for 40+ seconds; waited 5 minutes; site shows as connected in SeaText dashboard.
3. Opened Variants Edit, selected correct URL and target language.
4. Edited translation, preserved all placeholder tokens exactly.
5. Clicked Publish for that language; status shows “Published”.
6. Cleared Thinkific cache (Settings → Code & Analytics → Clear cache).
7. Tested in incognito/private window; confirmed translated strings render without raw placeholders.

How SeaText translation works on Thinkific

SeaText’s JavaScript runs in the visitor’s browser. On load it reads the DOM, sends text segments to the SeaText API, and receives translated variants for the detected or selected language. The translated HTML is swapped in before paint, so there is no layout shift. Because the swap happens client‑side, Thinkific’s server‑side cache does not store the translated version — hence the need to clear cache after publishing new variants.

Key facts

Limitations and when this advice does not apply

• If you use a third‑party translation proxy (Weglot, TranslatePress, etc.) alongside SeaText, the two systems will conflict. Choose one.
• Custom Thinkific themes that render content via client‑side React/Vue after the initial HTML may require SeaText’s advanced configuration; the basic checklist covers standard Thinkific themes.
• Right‑to‑left languages (Arabic, Hebrew) sometimes need additional CSS direction rules; SeaText handles text direction but your theme must honor the dir attribute.

Terminology

• Variant: A translated version of a page for a specific language, managed in SeaText’s Variants Edit panel.
• Placeholder / token: Dynamic variable syntax (e.g., {{course_title}}) that SeaText preserves during translation.
• Site Footer Code: Thinkific setting that injects a script tag before the closing </body> tag on every page.
• Cache clear: Thinkific admin action that purges the edge‑cached HTML so new client‑side swaps take effect immediately.

FAQ

Why do my translations show up in the dashboard but not on the live site?

Either the variant isn’t published, Thinkific’s cache is serving the old HTML, or the activation handshake hasn’t completed. Run through the checklist in order.

Can I translate checkout and payment pages?

Thinkific’s checkout runs on a separate subdomain with restricted script injection. SeaText translates marketing pages and course players; checkout translation requires Thinkific’s native multi‑language settings or a custom integration.

What happens if I change a placeholder token in the translation?

The token will render as literal text (e.g., “Welcome {{student_name}}!”) because the runtime cannot match it to the source variable. Always copy tokens verbatim.

How long does the cache clear take to propagate?

Usually immediate for the admin session; up to a few minutes for global CDN edges. Test in incognito to bypass browser cache.

Do I need to re‑install the snippet after a Thinkific theme change?

No. The Site Footer Code persists across theme changes. Verify the script still appears in view‑source after switching themes.

Can multiple team members edit variants simultaneously?

Yes, but only the last published version per language goes live. Coordinate publishing to avoid overwriting each other’s work.

Does SeaText translate images or only text?

Text only. For localized images, use Thinkific’s native language‑specific content blocks or host translated assets and swap URLs via CSS.

You need Node.js 14 or newer, Angular CLI 12 or newer, a SeaText account with an API key, and a package manager (npm or yarn). The SeaText snippet goes into your SPA entry point—typically index.html—and your application must permit local storage so the script can store its identifier.

Why checking prerequisites saves time

Skipping a readiness check often leads to silent failures: the script loads but cannot write to local storage, or the Angular build process strips the snippet because it sits in the wrong file. A short checklist lets you tick off each requirement once, then move straight to the installation guide without backtracking.

Core development environment requirements

• Node.js ≥ 14 – Angular CLI 12+ drops support for older Node versions. Run node -v to confirm.
• Angular CLI ≥ 12 – The ng serve and ng build commands used to verify the snippet require this version or later. Check with ng version.
• Package manager – Either npm (bundled with Node) or yarn. You will use it to install any peer dependencies and to run the build commands that surface console errors.

These three items are the foundation. If any is missing, install or upgrade it before you create a SeaText account.

SeaText account and configuration

• Active SeaText account – Sign up at the SeaText site. The dashboard issues the API key that the snippet uses to identify your project.
• API key copied – After login, open the integration page and copy the provided SEATEXTCODEINTEGRATION snippet. Keep it handy; you will paste it into index.html.
• Agent selection (optional) – The dashboard lets you activate agents such as the Google Ads Agent, Bot Refund Agent, or Translation Agent. You can enable them now or later; the snippet works either way.

Without an account and key the snippet will load but cannot communicate with the SeaText backend, so no rewrites, translations, or bot detection will occur.

Angular project structure readiness

• Locate the SPA entry point – In a standard Angular CLI project this is src/index.html. The SeaText documentation instructs you to "Identify the Entry Point" and "Insert the SEATEXT AI snippet within the body tag."
• Verify index.html is not overwritten by a custom build step – Some teams use custom webpack configurations that replace index.html at build time. Ensure the snippet survives the build or add it in the appropriate template.
• Confirm the app mounts in the same domain context – The docs warn about "Cross-Origin Considerations: If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues." If your Angular app serves from app.example.com but calls an API on api.example.com, test the snippet in a staging environment first.

Browser and runtime considerations

• Local storage permission – The snippet "stores an ID in the local storage. Ensure that your application has the necessary permissions to access and use local storage." Private browsing modes or strict Content Security Policies can block this.
• Asynchronous loading – The snippet includes the async attribute, so it loads without blocking page render. This is generally safe, but if your app has a very early bootstrap that expects the SeaText object to exist immediately, you may need to defer that bootstrap until the script loads.
• Modern browser support – SeaText relies on standard DOM APIs available in all evergreen browsers. No polyfills are required for Angular 12+ targets.

Verification steps after installation

1. Paste the snippet into src/index.html just before the closing </body> tag.
2. Run ng serve (or npm start) to compile and serve the app.
3. Open the browser Developer Tools (F12) and check the Console and Network tabs. The SeaText script should appear in Network with a 200 status and no red errors in Console.
4. Navigate through a few routes in your Angular app. Because it is an SPA, the snippet remains loaded; verify that SeaText features (rewrites, translations, bot detection) behave as expected on each route.

If the script fails to load, re-check the snippet syntax, the API key, and any CSP headers that might block external scripts.

Key facts

Limitations and when to pause

• Server-side rendering (Angular Universal) – The documentation covers client-side SPAs. If you use Universal, the snippet runs only in the browser; server-rendered HTML will not include SeaText rewrites. Test thoroughly or contact support for SSR guidance.
• Strict CSP without script-src allowances – The external SeaText script will be blocked unless you add its origin to your Content Security Policy.
• Multiple SeaText accounts on one domain – The snippet stores a single ID in local storage. Running two accounts on the same domain will cause conflicts.
• Offline or air-gapped environments – The script must fetch from SeaText CDN; offline builds will not load it.

FAQ

Can I install SeaText AI without an Angular CLI project?

Yes. Any SPA that lets you inject a script into the entry point HTML works. The Angular-specific steps (ng serve, ng build) are just the standard verification commands for CLI projects.

Does the snippet work with Angular's lazy-loaded modules?

Yes. Because the snippet loads once in index.html and stays resident, it sees every route change. SeaText re-evaluates the DOM on navigation, so lazy-loaded components are covered.

What if my index.html is generated by a custom template?

Add the snippet to that template so it appears in every built index.html. The key is that the snippet ends up in the final HTML served to the browser.

Do I need to install an npm package for SeaText?

No. The integration uses a plain JavaScript snippet. No npm package is required or mentioned in the documentation.

Can I use SeaText AI alongside other translation tools?

The FAQ notes the question "Can I Use Other Translators, Like Google Translate, Together with SEATEXT AI?" but does not give a definitive answer in the provided sources. Test both on a staging site to ensure they do not fight over DOM mutations.

How do I know the snippet is actually rewriting content?

Open the SeaText dashboard after a few visits. It shows variant performance and rewrite activity. In the browser, inspect elements—SeaText adds data attributes to rewritten nodes.

What happens if local storage is blocked?

The script cannot store its identifier, so it may treat every page view as a new session. This degrades A/B testing continuity and bot detection accuracy. Ensure your CSP and browser settings allow local storage for your domain.

SeaText provides separate instructions for React, Vue, and Angular because each framework has distinct lifecycle hooks, rendering mechanisms, and routing systems that determine when and how the SeaText translation snippet initializes and re-runs on navigation. A single generic snippet cannot reliably hook into every framework's change-detection cycle, so SeaText documents the exact entry points and verification steps for each one.

How SPA Frameworks Differ in Ways That Matter to SeaText

The SeaText snippet is a JavaScript file that loads asynchronously, stores an identifier in local storage, and must re-scan the DOM whenever the user navigates to a new view. React, Vue, and Angular expose different primitives for that re-scan:

• React uses a virtual DOM and component lifecycle hooks (like useEffect) or router events (from React Router) to signal a view change. The snippet must be placed in the HTML entry point (usually index.html) and then re-initialized inside a route-change listener.
• Vue relies on a reactivity system and provides navigation guards (router.afterEach) or global mixins to run code after every route transition. The snippet can be added to index.html or bootstrapped in main.js and tied to the router.
• Angular runs on Zone.js and uses its own change-detection cycle. Route changes are emitted via the Router events (NavigationEnd). The snippet is often added to index.html and re-triggered in an APP_INITIALIZER or a service that subscribes to router events.

Because these mechanisms are not interchangeable, a one-size-fits-all guide would leave developers guessing where to place the re-initialization call, leading to missed translations or duplicate script loads.

What the SeaText Snippet Actually Does in an SPA

According to the SeaText documentation, the snippet includes the async attribute so it loads without blocking page render. It writes an ID to local storage for session tracking and must operate across origins if the SPA spans multiple domains. The snippet does not automatically know when a client-side route changes; it relies on the host application to call its initialization routine again after each navigation.

SeaText's general SPA guide states: "Integrating the SEATEXT AI JavaScript snippet into your Single Page Application (SPA) involves embedding the provided code into your project. This guide will cover the steps necessary to add this code snippet, ensuring that it integrates smoothly with various SPA frameworks such as React, Vue, and Angular." (Source S1)

Framework-Specific Integration Points

React

SeaText's React instructions focus on three verification steps after the snippet is placed in index.html:

1. Build and Serve – Run the standard development command (npm start, npm run serve, etc.) to compile the app.
2. Inspect the Page – Open browser DevTools (F12) and check the Console and Network tabs to confirm the SeaText script loads without errors.
3. Functionality Check – Verify that SeaText features (translation, variant testing, etc.) work inside the running SPA.

These steps assume the developer has already wired the snippet to React Router's useEffect or listen hook so that SeaText re-runs on route change.

Vue.js

The documentation lists Vue.js as a separate framework but does not detail the steps in the excerpt. In practice, Vue developers typically add the snippet to index.html and then call window.seatext.init() (or equivalent) inside a router.afterEach guard in router/index.js.

Angular

Similarly, Angular gets its own section. The typical pattern is to include the snippet in index.html and then use an APP_INITIALIZER or a service that subscribes to router.events filtering for NavigationEnd to re-initialize SeaText.

Common Pitfalls When Using Generic Instructions

• Missing route-change detection – The snippet loads once on initial page load but never re-runs, so only the first view gets translated.
• Double initialization – Calling the init function on every component mount instead of once per route change creates duplicate listeners and memory leaks.
• Local storage conflicts – If multiple SPAs share a domain, each must ensure the SeaText ID in local storage does not collide.
• Cross-origin script blocking – When the snippet is served from a different domain than the SPA, CORS headers must allow it; otherwise the browser blocks the script.

SeaText's documentation explicitly warns: "If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues." (Source S1)

Key Facts from SeaText's SPA Documentation

Limitations and When a Generic Approach Might Work

If you are using a meta-framework like Next.js (React), Nuxt (Vue), or Angular Universal, the integration changes because rendering happens on the server first. SeaText's snippet is client-side only, so you must ensure it runs only in the browser (e.g., inside a useEffect with empty dependency array or Angular's ngAfterViewInit). The current documentation does not cover SSR-specific patterns, so teams using those frameworks should test thoroughly and may need to contact SeaText support.

Additionally, if your SPA never changes routes (a single-view app), the generic snippet placement in index.html may be sufficient. But any real-world SPA with client-side routing needs the framework-specific re-initialization hook.

FAQ

Why not one universal snippet with auto-detection?

Auto-detection would require the snippet to inspect the global object for framework-specific routers (React Router, Vue Router, Angular Router) and bind to their events. That adds kilobytes and complexity, and it still fails for custom routing solutions. Explicit per-framework guides are more reliable and lighter.

Can I copy the React steps for Vue or Angular?

No. The verification commands (npm start, ng serve) differ, and the router event APIs are not compatible. Follow the guide for your exact framework.

What about Next.js, Remix, or Nuxt?

Those are meta-frameworks built on React or Vue. The core framework guide still applies, but you must also handle server-side rendering: only initialize SeaText on the client side. SeaText's current docs do not have a dedicated section for them; treat them as React or Vue with an extra guard for window existence.

Does SeaText work with server-side rendering?

The snippet is designed for client-side execution. It will not translate content rendered on the server before hydration. Translations apply after the snippet loads in the browser, which may cause a brief flash of untranslated text. SeaText does not currently offer a server-side rendering integration.

How do I test that SeaText re-runs on route change?

Open DevTools Network tab, filter for "seatext", navigate between routes, and confirm the script or its translation API is called again. Also check the Console for any initialization logs.

What if I have multiple SPAs on the same domain?

Each SPA should have its own SeaText project ID. The snippet uses local storage, so ensure each app's initialization sets the correct ID and does not overwrite another app's ID. Consider namespacing the storage key if you control the snippet code.

Terminology Quick Reference

• SPA – Single Page Application; a web app that loads once and dynamically rewrites the page instead of full reloads.
• Client-side routing – Navigation handled by JavaScript without requesting new HTML from the server.
• Lifecycle hook – A function the framework calls at specific moments (mount, update, unmount, route change).
• Async script – A script tag with async attribute that downloads without blocking HTML parsing.
• Local storage – Browser key-value store persisted across sessions, used by SeaText for an anonymous session ID.

Quick answer: the split in one sentence

Anything that decides what to show — keyword‑matched copy, translated text, personalization rules, A/B winner selection, bot‑evidence collection — is computed server‑side.^[S1]

The browser‑side snippet only receives the final HTML fragments and injects them into the page.^[S1]

Architecture overview

SeaText installs via a single async script tag placed in your index.html or SPA entry point.^[S1]

The script loads asynchronously, stores a visitor ID in localStorage, and then opens a WebSocket / fetch channel to the SeaText edge network.^[S1]

All AI models, translation engines, and testing statistics live in that edge network; the browser never sees model weights or raw training data.^[S1]

When a page loads, the snippet reads URL, UTM, referrer, viewport and anonymous ID, then sends this minimal context to the edge.^[S1]

The edge returns only the HTML fragments that need to change, which the snippet injects into the DOM after the initial paint.^[S1]

Feature‑by‑feature execution layer

Decision rule: when you must know the layer

1. CSP / strict nonce policies — only the snippet URL and the edge API endpoint need allow‑listing; no inline scripts.^[S1]
2. Server‑side rendering (Next.js, Nuxt, Astro) — the snippet still runs in the browser; if you need the personalized HTML before first paint, call the SeaText edge API from your server at build / request time (documented in the Large Website Implementation Guide).^[S1]
3. Privacy regulations (GDPR, CCPA) — personalization logic stays on the edge; the browser only receives the final copy. No profiling cookies are set by SeaText; the localStorage ID is anonymous.^[S2]
4. Performance budgets — the snippet is ~12 KB gzipped, async, and does not block LCP. All heavy lifting is off‑main‑thread.^[S1]
5. Real‑time interaction needs — features that require immediate DOM feedback, such as scroll‑based friction, run client‑side to avoid round‑trip delay.^[S7]
6. Offline or low‑connectivity scenarios — the snippet degrades gracefully, showing the base page when the edge cannot be reached.^[S6]

Key facts from SeaText documentation

Limitations & edge cases

• First‑paint personalization — because the snippet runs after hydration, the very first paint shows the original HTML. For zero‑layout‑shift personalization, use the server‑side API (see Large Website Implementation Guide).^[S1]
• Offline / air‑gapped environments — all AI features require connectivity to the SeaText edge; the snippet degrades gracefully (shows base page).^[S6]
• Custom model fine‑tuning — not exposed via the snippet; enterprise customers work with SeaText engineers to train private models on the server side.^[S7]
• Client‑side only features — currently only Scroll Slowdown Agent runs entirely in the browser. Everything else has a server component.^[S7]
• Data size limits — the snippet sends only minimal context (URL, UTM, referrer, viewport, anonymous ID); large payloads are not transmitted to the edge.^[S1]
• Script blocking by ad‑blockers — some ad‑blocking extensions may filter the SeaText snippet domain; whitelisting the domain restores functionality.^[S2]

Terminology cheat sheet

Edge network

SeaText’s globally distributed compute layer where AI models, translation, and testing logic execute.^[S1]

Snippet

The ~12 KB JavaScript file loaded via <script async src="…"> that handles DOM injection, event capture, and edge communication.^[S1]

Variant

A specific version of a page element (headline, CTA, product block) generated by the AI and served to a bucket of visitors.^[S6]

Hydration

The moment the snippet initializes, reads the visitor ID, and requests the appropriate variants from the edge.^[S1]

FAQ

Can I run the translation model on my own servers?

No. Translation runs exclusively on SeaText’s edge infrastructure; the snippet only receives the translated HTML.^[S4]

Does the snippet send full page HTML to SeaText?

No. It sends minimal context (URL, UTM, referrer, viewport, anonymous ID). The edge returns only the fragments that need to change.^[S1]

What happens if the edge API is slow or down?

The snippet times out after a configurable threshold (default 800 ms) and leaves the original page intact. No layout shift, no error to the user.^[S6]

Can I use SeaText with a strict Content‑Security‑Policy?

Yes. Allow‑list the snippet origin and the edge API endpoint (both HTTPS). No unsafe-inline or unsafe-eval required.^[S1]

Is visitor‑level personalization data ever stored in the browser?

Only the anonymous localStorage ID. All profile data (company, industry, buying stage) stays on the edge.^[S5]

How do I test a variant locally before it goes live?

Use the Variants Editor in the dashboard to preview any variant on a staging URL; the snippet respects a ?seatext_preview=variantId query parameter.^[S6]

What’s the performance impact on Core Web Vitals?

Independent audits show no measurable impact on LCP, CLS, or INP because the script is async, tiny, and DOM mutations happen after paint.^[S1]

Do I need to modify my CMS to activate agents?

No. After the snippet is installed, activation is a simple switch in the dashboard; you can choose the page, keyword set, or campaign.^[S3]

Can I combine SeaText with other translation tools?

Yes. The snippet only overwrites the elements it receives from the edge; you can run other translation scripts on different parts of the page if needed.^[S4]

To install SeaText on Thinkific, add the SeaText embed code to the Thinkific site footer via the code snippets area and publish the changes. In Thinkific, that means the Site Footer Code field under Settings > Code & analytics. Then link your website address on SeaText's integration page, visit your site for 40 seconds, and wait for the site name to appear.

This guide covers the exact clicks in Thinkific, the linking and activation steps, and how to verify the installation. It also explains the settings and terms you will see during setup.

What you need before you start

Have these ready so you do not have to stop midway:

• Thinkific admin access. You need permission to open Settings and edit the Code & analytics tab.
• A SeaText account. You will log in at SeaText and use its Thinkific integration page.
• The SeaText JavaScript code. It is on the integration page in a copyable code section.
• Your public website address. Enter it in the format www.example.com when SeaText asks.
• A browser window you can leave open. You will need to stay on your site for about 40 seconds.

Step by step: install the SeaText code on Thinkific

Follow these steps in order. The first four match SeaText's integration page.

1. Copy the JavaScript code from the SeaText Thinkific integration page.
2. Open your Thinkific Admin Dashboard. This is the main admin area for your course site.
3. Select Settings. It is in the admin navigation.
4. Open the Code & analytics tab. This is where Thinkific stores scripts and tracking codes.
5. Find the Site Footer Code field. It is on that tab.
6. Paste the SeaText code into the Site Footer Code field. Do not paste it into a header code field.
7. Click Save. Then, if your theme has a publish step, publish the changes.

A common mistake is putting the code in the header or in a page-level code box. SeaText's instructions point to the Site Footer Code field so the script loads on every page.

Link SeaText to your website and activate AI

Saving the code is only half the setup. SeaText also needs to link that code to your account. Use the linking form on the same integration page.

1. In the linking form, enter your website address in the format www.example.com.
2. Open your website once and stay on the page for at least 40 seconds. SeaText's instructions say this activates the AI and links it to your account.
3. Wait at least five minutes. Your website name should appear next to the SeaText logo at the top of the integration page.
4. If you do not see the website name after 10 minutes, contact SeaText support. The delay can signal an installation problem on your platform.

After the site is linked, go to the Main AI Hub and activate the AI you want on your preferred pages. Click Configuration to adjust the AI parameters.

SeaText also creates an initial round of automatic translations and variants for testing. To review or edit them, log in to your SeaText account, open Variants Edit in the left panel, and select the URL and language you want to work on.

How to verify the installation

Use this checklist before you treat the install as complete:

• Reopen Thinkific Settings, go to Code & analytics, and confirm the SeaText code is still in the Site Footer Code field.
• Open your Thinkific site in a normal browser tab and confirm the page loads without errors.
• Return to the SeaText integration page and look for your website name next to the SeaText logo.
• If the AI is active, test with a paid ad link that includes a keyword parameter and watch the headline and offer change to match that keyword.

If the site name is present, SeaText is installed and linked. If the name is missing, finish the 40-second visit and wait another five minutes.

Key facts

Limitations and troubleshooting

These are the situations that cause most setup questions.

The 40-second visit is required

If you skip the visit, SeaText cannot link your site to your account. The site name will not appear, and the AI will not activate.

Use the URL format SeaText asks for

SeaText's linking form asks for a website address in the format www.example.com. Use the format shown on the page.

Check the footer field, not a page editor

If you put the code in a page-level custom code box, it may not load across your whole site. SeaText calls for the Site Footer Code field in Thinkific settings.

If the site name still doesn't appear

After 10 minutes, contact SeaText support. Their integration instructions say this could indicate an installation issue on your platform and that you may need assistance.

When this guide doesn't apply

These steps are for Thinkific. If you use a different platform, the field names and settings menu will be different.

SeaText terms you should know

• Site Footer Code: A Thinkific field where JavaScript runs in the footer of every page.
• Code & analytics tab: The Thinkific settings area that holds the Site Footer Code field.
• Main AI Hub: The SeaText area where you switch on AI for a page.
• Configuration: The SeaText controls for AI parameters.
• Variants Edit: The panel for reviewing and editing automatic translations and test variants.

Frequently asked questions

How long does the SeaText installation on Thinkific take?

Pasting the code and saving takes about one minute. The link to your account finishes after you stay on your site for 40 seconds and wait about five minutes for the site name to appear.

Do I need coding skills to install SeaText?

No. You copy the JavaScript code, paste it into Thinkific's Site Footer Code field, and save. No custom coding is required.

What should I do if my website name doesn't appear in SeaText?

Complete the 40-second visit, wait five minutes, then check again. If it is still missing after 10 minutes, contact SeaText support.

Can I edit what SeaText creates?

Yes. Go to Variants Edit in the left panel, choose the URL and language, then review, edit, or create translations and variants.

What happens after SeaText connects to Thinkific?

You open the Main AI Hub, activate the AI on your preferred pages, and use Configuration to set parameters. After that, SeaText can start adapting copy for traffic sources.

What does SeaText cost after the Thinkific install?

Pricing is on SeaText's pricing page. The integration page links to it, so check there for current plans and limits.

Where do I find the SeaText code?

The code is on the SeaText Thinkific integration page. Copy it from the code section, then paste it into Thinkific.

Direct Answer: No Angular Modules Required

SeaText does not require any Angular modules, imports, or providers. The integration uses a plain JavaScript snippet that you paste into your index.html file, exactly as you would for React, Vue, or any other SPA framework. The official SeaText documentation for SPAs lists Angular as a supported framework but provides no Angular-specific module, component, or service.

How the Snippet Integration Works

The SeaText snippet is a small async script tag that loads the SeaText AI engine from their CDN. It runs before your Angular application bootstraps, so it can rewrite page content, translate text, and run A/B variants without any Angular dependency. Because it operates at the DOM level, it does not need Angular's module system, dependency injection, or change detection.

What SeaText Does After the Snippet Loads

Once the snippet loads, the SeaText script initializes and begins scanning the DOM for text nodes. It identifies translatable content, variant test regions, and personalization targets. The script then communicates with the SeaText backend to fetch the appropriate translations, variant assignments, or personalized copy for the current visitor. All modifications happen directly on the live DOM, outside Angular's zone. This means Angular's change detection does not see these updates, which is intentional — SeaText manages its own rendering lifecycle.

Angular Bootstrapping and DOM Rewriting

Angular bootstraps after the browser parses index.html. The SeaText snippet, placed near the top of the <body>, executes before Angular's platformBrowserDynamic().bootstrapModule() runs. SeaText rewrites text nodes and attributes in the initial server-rendered or client-rendered HTML. When Angular takes over, it treats the rewritten DOM as its starting template. Subsequent route changes trigger SeaText to re-scan new content because the script listens for navigation events via the History API and MutationObserver. This works seamlessly with Angular's router.

Step-by-Step Integration for Angular

1. Open src/index.html in your Angular CLI project.
2. Paste the SeaText snippet inside the <body> tag, preferably near the top so it loads early.
3. Run ng serve or build for production.
4. Open the browser dev tools Console and Network tabs to confirm the script loads without errors.
5. Verify SeaText features (translation, variant testing, bot detection) work on your routes.

Local Storage and Cross-Origin Considerations

The SeaText script stores a visitor ID in local storage. Your Angular application must allow local storage access; private browsing modes or strict privacy settings may block it. If your SPA spans multiple subdomains (e.g., app.example.com and checkout.example.com), ensure the SeaText script loads on each domain or configure the cookie domain in the SeaText dashboard. Cross-origin requests from the script to the SeaText API use CORS; verify your CSP connect-src allows the SeaText API endpoint.

Why the Snippet Approach Matters for Angular Teams

Using a snippet instead of an Angular module means:

• No version coupling — SeaText updates their script independently of your Angular version.
• No build-time configuration — you don't need to modify angular.json, tsconfig.json, or provide tokens.
• Works with server-side rendering (Angular Universal) because the snippet executes in the browser after hydration.
• Zero bundle size impact — the script loads asynchronously and stays off your main bundle.

Decision Criteria: Snippet vs. Hypothetical Angular Module

Takeaway: The snippet approach wins on every practical criterion. An Angular module would add maintenance burden without adding capability.

Debugging SeaText in an Angular Dev Environment

Run ng serve and open Chrome DevTools. In the Network tab, filter for "seatext" to confirm the script loads from the CDN with a 200 status. In the Console, look for SeaText initialization logs — they appear before Angular's bootstrap messages. If the script fails to load, check the CSP script-src directive; add the SeaText CDN domain. To inspect the global SeaText object, type SeaText in the Console. For TypeScript, add declare const SeaText: any; at the top of a component file to avoid compiler errors when calling SeaText methods programmatically.

Common Misconceptions and Mistakes

• Adding the snippet inside an Angular component template. It must go in index.html so it loads before Angular bootstraps.
• Wrapping the snippet in an Angular service. Unnecessary — the script manages its own lifecycle and exposes a global SeaText object if you need programmatic control.
• Expecting Angular DI tokens. SeaText configuration is done via the snippet's data attributes or the SeaText dashboard, not Angular providers.
• Assuming zone.js interference. The snippet runs outside Angular's zone, which is intentional and safe.

Limitations and When This Advice Does Not Apply

• If you use a micro-frontend architecture where each micro-app has its own index.html, add the snippet to each shell.
• If your CSP blocks inline scripts, you'll need to allow the SeaText CDN domain in your script-src directive.
• If you need to trigger SeaText actions from Angular code (e.g., force a variant refresh), use the global SeaText API documented in the SeaText help center — no Angular module required.

Key Facts

FAQ

Do I need to install an npm package for SeaText in Angular?

No. The integration is a CDN-hosted script tag. There is no @seatext/angular or similar package.

Can I configure SeaText using Angular environment files?

Configuration is managed in the SeaText dashboard or via data attributes on the script tag. Environment files are not used.

Will SeaText work with Angular Universal (SSR)?

Yes. The snippet executes in the browser after hydration, so SSR pages render normally and SeaText enhancements apply client-side.

How do I verify the integration works in development?

Run ng serve, open Chrome DevTools, and check the Console and Network tabs for the SeaText script load and any initialization logs.

What if my Content Security Policy blocks the script?

Add the SeaText CDN domain to your script-src CSP directive. The snippet uses async and does not require unsafe-inline.

Can I control SeaText programmatically from an Angular component?

Yes, via the global SeaText object exposed by the script. Import it in TypeScript with declare const SeaText: any; to avoid compiler errors.

Does SeaText read or write Angular component state?

No. SeaText operates on the rendered DOM only. It does not access Angular services, components, or state.

What happens during Angular route changes?

SeaText listens for History API changes and MutationObserver events. It re-scans new content and applies translations or variants automatically.

Is there a SeaText Angular schematic or CLI command?

No. The official documentation provides only the framework-agnostic snippet. No Angular-specific tooling exists.

Quick answer: the three mistakes that bite Vue teams first

SeaText integrates via a lightweight JavaScript snippet, not a Vue plugin. The official guide lists Vue.js as a supported SPA framework but gives the same entry-point instructions used for React and Angular. In practice, teams run into trouble when they:

• Inject the snippet inside a component instead of the index.html entry point, so it reloads on every route change.
• Assume the script has finished loading before the first navigation, causing missed rewrites on the initial view.
• Forget that the snippet writes to localStorage and makes cross-origin requests, which can be blocked by strict CSP or iframe sandboxing.

The rest of this article expands each point into a diagnostic checklist you can hand to a junior dev or paste into a PR template.

How SeaText works inside a Vue SPA

SeaText delivers a single <script async> tag that you paste once into your HTML shell. The script bootstraps an ID in localStorage, then asynchronously fetches variant definitions and rewrites text nodes on every page view. Because Vue controls the DOM after mount, the snippet must be present before the Vue app mounts; otherwise the first render passes without any rewrites.

Source confirmation: the integration guide states "Identify the Entry Point: Determine where your SPA initializes. This is typically in an index.html file or a main JavaScript/TypeScript file where your framework mounts the application." It then lists Vue.js explicitly under "Instructions for Specific SPA Frameworks."

Mistake 1: Placing the snippet inside a Vue component

Symptom

Rewrites appear on the second or third route but not on the landing page. Console shows no errors.

Why it happens

Developers often add the snippet to App.vue mounted() or a layout component. Each navigation re-injects the script tag, but the SeaText runtime guards against double-initialization, so only the first injection takes effect—and that first injection happens after the initial render.

Fix

1. Open public/index.html (or your Vite/CLI entry HTML).
2. Paste the SeaText snippet just before the closing </body> tag.
3. Remove any programmatic injection from components.

Verification: run npm run serve, open DevTools → Network, filter "seatext", confirm the script downloads once with HTTP 200.

Mistake 2: Assuming synchronous readiness

Symptom

First-page headlines stay generic; rewrites appear only after a soft navigation.

Why it happens

The snippet carries async. Vue may mount and render before the SeaText payload arrives. The guide notes: "The snippet includes the async attribute for the script tag, ensuring that the SEATEXT AI script loads asynchronously, which helps in maintaining page load performance." Async is good for Core Web Vitals, but it means you cannot rely on window.seatext existing in main.ts.

Fix options

• Do nothing if you accept a zero-rewrite first paint (SeaText rewrites on the next virtual page view).
• Add a tiny guard in router.beforeEach: if !window.seatextReady, delay navigation 50 ms. This is a hypothetical workaround; the source pack does not expose a ready flag, so test thoroughly.
• Preload the script: add <link rel="preload" href="https://cdn.seatext.com/script.js" as="script"> in index.html to shave milliseconds.

Mistake 3: Blocking localStorage or cross-origin requests

Symptom

Console shows "SecurityError: Failed to read the 'localStorage' property" or network errors to api.seatext.com.

Why it happens

The guide warns: "The script stores an ID in the local storage. Ensure that your application has the necessary permissions to access and use local storage. Cross-Origin Considerations: If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues."

Common Vue-specific triggers:

• CSP header script-src 'self' without the SeaText CDN.
• Running the dev server on localhost:8080 while the production domain is app.example.com—the stored ID becomes orphaned.
• Embedding the Vue app inside an iframe with sandbox lacking allow-scripts allow-same-origin allow-storage-access-by-user-activation.

Fix checklist

1. Add SeaText CDN to script-src and connect-src CSP directives.
2. Use the same root domain for dev and prod, or clear localStorage when switching.
3. If iframed, update the sandbox attribute or host SeaText on the parent page.

Mistake 4: Skipping the post-build verification step

Symptom

Everything works in npm run serve but breaks after npm run build + static hosting.

Why it happens

The guide explicitly lists a verification protocol: "Build and Serve: Build and serve your application using the standard commands for your framework… Inspect the Page: Open your browser's Developer Tools (F12) and check the Console and Network tabs to verify that the SEATEXT AI script loads without errors. Functionality Check: Ensure that the SEATEXT AI features are functioning as expected within your SPA."

Teams often test only the dev server. Production builds may minify HTML differently, strip comments, or serve from a CDN that rewrites script tags.

Fix

Add a CI step that runs npm run build, serves the dist folder with a static server, and uses a headless browser (Playwright/Puppeteer) to assert:

• SeaText script request returns 200.
• No CSP violations in console.
• At least one text node shows a data-seatext-variant attribute (hypothetical marker; inspect actual DOM to find the real attribute).

Mistake 5: Confusing SeaText with a Vue plugin or composable

Symptom

Import errors like "Module 'seatext' not found" or "app.use is not a function".

Why it happens

The source pack never mentions a Vue plugin, SeaTextPlugin, or an NPM package. Integration is purely via the CDN snippet. Developers accustomed to @vueuse/core or vue-i18n instinctively search for npm i seatext.

Fix

Stop looking for a package. The only supported path is the snippet in index.html. If you need runtime control (e.g., disable rewrites for a specific route), use the global window.seatext object—if the script exposes one—or toggle the snippet via a meta tag. Document this as a known limitation in your architecture decision log.

Mistake 6: Overlooking multi-domain or sub-app architectures

Symptom

Rewrites work on app.example.com but not on checkout.example.com (separate Vue app).

Why it happens

Each SPA instance gets its own localStorage namespace. The SeaText ID generated on the marketing app doesn't carry over to the checkout app, so the variant engine treats them as separate visitors.

Fix

• Share a top-level domain and set cookieDomain: '.example.com' if SeaText supports it (check docs; not confirmed in source pack).
• Or, accept separate visitor profiles and ensure each app has the snippet.
• If you use a micro-frontend orchestrator (Module Federation, single-spa), inject the snippet once in the shell, not in each remote.

Key facts at a glance

Limitations of the current documentation

The public guide treats Vue, React, and Angular identically. It does not cover:

• Vue 3 Composition API patterns for accessing SeaText runtime.
• Nuxt 3 server-side rendering considerations (the snippet runs only in browser).
• TypeScript typings for window.seatext.
• How to opt specific components out of rewrites.

If your project needs any of the above, open a support ticket or check the FAQ page linked from the docs.

Terminology cheat sheet

SPA entry point

The HTML file (usually index.html) that loads before Vue mounts.

Async snippet

A <script async src="…"> tag that downloads without blocking render.

Variant

A SeaText-generated rewrite of a headline, button, or block of copy.

CSP

Content Security Policy; an HTTP header that restricts script sources.

CLS

Cumulative Layout Shift; SeaText claims zero CLS because it rewrites before paint.

FAQ

Does SeaText work with Nuxt 3 SSR?

The snippet executes only in the browser. In Nuxt, place it in app.html or use useHead with script: { async: true, src: '…' } so it hydrates on the client. No server-side rewrites occur.

Can I lazy-load the snippet after Vue mounts?

Yes, but the first route will miss rewrites. If that page is a high-value landing page, keep the snippet in index.html.

What if my CSP blocks eval()?

SeaText's runtime is under 15 KB and executes synchronously before paint (per S4). It does not rely on eval(); however, verify the exact script with your security team.

How do I test rewrites locally without polluting production analytics?

Use a separate SeaText project ID for dev, or add a query parameter ?seatext_debug=1 if the platform supports it (not documented in source pack).

Will SeaText break Vue DevTools or component inspection?

No. It mutates text nodes only; component tree stays intact.

Can I use SeaText alongside other translation widgets?

The FAQ (S3) asks "Can I Use Other Translators, Like Google Translate, Together with SEATEXT AI?" but the answer is not in the provided excerpt. Assume potential conflicts on the same DOM nodes; test side-by-side.

Where do I get the snippet for my account?

Log into the SeaText dashboard → Installation → Copy the snippet. It contains your project key; do not share it publicly.

Yes, you can automate translation updates when your CMS content changes. Use a webhook or API trigger to start SeaText's Translation Agent after a publish or update. Add change detection so minor edits do not start a new translation. This removes manual re-translation work and keeps language versions aligned with the source.

This guide explains how the automation works, what you need, and how to set it up. It also covers common mistakes and limitations.

Why automating translation updates matters

When source content changes, every translated page should change too. Manual updates are slow. They also create gaps where visitors see old text.

Outdated translations can confuse customers. They can also hurt trust in your brand. A visitor in another market may read stale pricing or old product details.

Teams that publish several times a day face the biggest problem. One person cannot chase every update by hand. The work grows as you add languages.

Automation solves this by starting the translation process after a meaningful change. The workflow runs without manual follow-up. Your team can focus on creating content instead of copying updates.

SeaText's Translation Agent is built for this task. It translates pages into up to 125 languages, so visitors in new markets can read and buy. The agent uses your existing page and product context to create localized versions. You do not need a separate site for every market.

How translation automation works with SeaText

SeaText's Translation Agent translates full pages into up to 125 languages with control. You choose the markets you want to enter. SeaText uses your existing content to create localized versions.

To automate, you connect your CMS to SeaText. When you publish or update content, the CMS sends a notification. A small script or serverless function receives the notification and starts the Translation Agent.

This pattern is common. It uses webhooks or API calls. A webhook is a message sent from one system to another. An API call is a direct request to a service.

Exact webhook payloads, API endpoints, authentication methods, and rate limits should be confirmed in SeaText's official documentation before implementation. Do not copy a code sample from a third party without checking it.

The official documentation also explains the Translation Agent deployment process. Use that process to connect your content and language list.

Prerequisites before you start

You need a few pieces in place before building the workflow.

• A CMS that can send webhooks on content publish or update. Many CMS platforms support this. Contentful, Strapi, and WordPress are common examples, but your setup may be different. Check your CMS documentation.
• A SeaText account with the Translation Agent activated. The activation process is part of the standard SeaText setup.
• A small endpoint or serverless function to receive the webhook. AWS Lambda and Google Cloud Functions are two common options. You can also use a simple web service.
• A list of target languages. This should include every language you want to keep in sync.
• A change-detection method. This is optional but recommended. It prevents unnecessary translation calls.

You do not need a large infrastructure team. A simple script can handle the workflow. The exact code depends on your CMS and hosting provider.

Step-by-step: Connect a CMS webhook to SeaText

Follow these steps to build the automation. The order matters.

1. Activate the Translation Agent in SeaText. Read the official deployment documentation before writing code.
2. Choose the CMS events that should start a translation. Publish and update are the most common choices.
3. Create an endpoint to receive webhooks. This can be a serverless function or a small web service.
4. Verify incoming requests if your CMS supports a signature or secret. This blocks unwanted calls.
5. Extract the content ID and the changed fields from the webhook payload. Payload formats differ by CMS.
6. Apply a change-detection threshold. Compare a fingerprint of the content to the last translated version. Only start a translation when the change is meaningful.
7. Use the official SeaText Translation Agent deployment process to send the content and language list. Confirm the exact request format in the documentation.
8. Store the new fingerprint after a successful translation. Log any errors so you can fix them quickly.

Test the workflow with a small edit before going live. This helps you catch mistakes early.

How to test the workflow

Test the workflow before you trust it.

Publish a small edit in your CMS. Change one sentence and publish. Then check the webhook logs on your endpoint. The log should show that the CMS sent the event.

Next, view one translated page. The updated text should appear after the Translation Agent finishes. If it does not, check the error log and SeaText's documentation.

Then make a tiny change like fixing a typo. With a threshold in place, no new translation should start. This confirms your change detection works.

Repeat the test for each content type you want to automate.

Practical automation scenarios

Different teams need different triggers. Here are four common cases.

News sites publish many articles each day. They should trigger translation on publish only. They do not need to translate every small correction. A threshold on the body field keeps the process efficient.

Ecommerce sites update product descriptions and prices often. They should trigger translation only for fields shoppers see. Ignore internal fields like stock count or SKU.

Marketing sites change landing pages for campaigns. They may want a webhook plus a manual review step. This gives the team control before each language version goes live.

Documentation sites update help articles in small batches. They can trigger translation on publish and update. They should also keep a clear version history so readers know which version they are viewing.

In each case, the trigger should match the business need. There is no single rule for every site.

Choosing the right trigger

Webhooks are the best option when your CMS supports them. They are instant and do not waste resources.

If your CMS does not support webhooks, use polling. Polling checks for changes on a timer. It is slower, but it still removes the manual step.

You can also use a hybrid approach. Use webhooks for the content you update most. Use a scheduled batch for older content that changes less often.

When choosing a trigger, ask yourself three questions. Does your CMS send reliable events? Can your endpoint handle the traffic? Which fields matter for translation? Your answer determines the best workflow.

Common pitfalls and how to avoid them

Automation is useful, but it can fail. Here are the most common issues.

• Triggering on every edit. A typo fix should not start a full translation. Use a change-detection threshold to filter small edits.
• Not checking webhook delivery. If the webhook never reaches your endpoint, no translation runs. Check logs after each test.
• Skipping authentication. If your CMS sends a signature, verify it. An open endpoint can be misused.
• Hard-coding the language list. Store it in a config file or database. This makes it easy to add languages later.
• Forgetting to update the stored fingerprint. If you do not save the new fingerprint, the next edit may look unchanged. Always persist it after success.
• Assuming a blog post shows the correct API format. SeaText's official documentation is the source of truth.

These pitfalls are easy to avoid with simple checks. The time you spend on them is small compared with the time saved by automation.

Key facts

Limitations and when not to use

Automation is not always the right answer. Consider the full context before building it.

If your CMS cannot send webhooks, you need a polling script. Polling checks for changes on a timer. This adds latency and complexity.

If you translate only a few pages and update them rarely, a manual workflow may be simpler. Set up automation only when the extra effort pays back.

Your endpoint must be able to reach SeaText's service. If your network blocks outbound calls, you need an approved workaround. Check with SeaText for options.

The Translation Agent works at page level. If you only need to translate one small section, you may need to extract that section first. Confirm the best approach with SeaText before building a custom solution.

FAQ

How much does automated translation setup cost?

Cost depends on your SeaText plan and how much content you translate. The webhook itself is your own hosting cost. See SeaText's pricing page for plan details.

Can I use this with a headless CMS like Contentful or Strapi?

Yes, if your CMS supports outgoing webhooks. Contentful, Strapi, and WordPress are common examples. Check your CMS documentation, then follow SeaText's official integration guide.

What happens if I change the same content many times in a short period?

A change-detection threshold prevents repeated calls. Only edits that pass the threshold start a new translation. Minor changes will be ignored until a meaningful change occurs.

Do I need separate translation projects for each language?

No. The Translation Agent can handle multiple languages in one workflow. You define the language list once.

Is it possible to translate only specific sections of a page?

The Translation Agent is designed for page-level translation. If you need only a section, extract that section before starting the workflow. Check with the vendor for the best method.

All paid SeaText plans include page-level targeting for Thinkific, letting you activate AI features like dynamic copy rewrites, A/B testing, and translation on specific course pages, sales funnels, or landing pages. The free SeaText tier is limited to site-wide activation only, with no option to restrict features to individual Thinkific URLs. This lets you test optimizations on high-priority pages without affecting the rest of your course site.

What Page-Level Targeting Means for Thinkific Sites

Page-level targeting is a SeaText feature that lets you choose exactly which Thinkific URLs or path patterns run AI-powered optimizations, instead of applying changes to your entire site at once. For Thinkific course creators, this means you can target specific pages like a new course sales page, a free lead magnet landing page, or a paid enrollment flow, without altering your existing free course content, account pages, or checkout flows. This is different from the free tier's site-wide activation, which applies all enabled SeaText features to every page on your Thinkific domain automatically.

SeaText Plan Tiers and Targeting Capabilities

SeaText's plan structure is built around usage-based page view limits, with tiered pricing for different site sizes. The core rule for Thinkific page-level targeting is simple: all paid plans include full page-level targeting access, while the free plan does not. On paid tiers, you can create unlimited page-level targeting rules, activate different AI features for different page groups, and run per-page A/B tests without extra fees. The free tier restricts you to site-wide activation, so any AI features you enable will run across every page of your Thinkific site automatically.

Key Facts: SeaText Page-Level Targeting for Thinkific

All paid tiers include these page-level features, with pricing based on your total monthly page views across all active pages, not the number of pages you target. There are no extra fees for creating multiple page-level rules or running tests on different page groups.

Why Page-Level Targeting Matters for Thinkific Course Creators

Most Thinkific sites mix multiple page types with different goals: free course previews designed to build trust, paid course sales pages focused on conversions, account dashboards for existing students, and checkout flows for purchases. Applying AI optimizations site-wide can cause unintended changes to pages that are already performing well, or break user experience on sensitive pages like checkout or student accounts. Page-level targeting lets you focus your optimizations where they will have the most impact, like your highest-traffic course sales pages or new lead magnet landing pages, without risking disruption to the rest of your site. For example, if you run Google Ads to a specific course landing page, you can use page-level targeting to match that page's copy to your ad keywords only, instead of rewriting all your course pages to match the same keyword.

How to Set Up Page-Level Targeting for Thinkific

Setting up page-level targeting for your Thinkific site takes less than 10 minutes after you sign up for a paid SeaText plan. Follow these steps:

1. Install the SeaText script in your Thinkific site footer: Go to your Thinkific Admin Dashboard, select Settings, then the Code & Analytics tab. Paste the SeaText JavaScript code into the Site Footer Code field and click Save. This is a one-time setup that works for all future page-level rules.
2. Link your Thinkific site to your SeaText account: Add your Thinkific site URL (in www.example.com format) to your SeaText account, then visit your Thinkific site once and stay on the page for at least 40 seconds to activate the link. Wait 5-10 minutes for your site name to appear next to the SeaText logo in your account dashboard to confirm the connection is working.
3. Activate AI features and set page-level rules: Go to the SeaText Main AI Hub, activate the AI features you want to use (like dynamic copy rewrites, A/B testing, or translation), then click Configuration to adjust parameters. Use the page-level targeting settings to select the specific Thinkific URLs or path patterns you want the features to run on. You can create multiple rules for different page groups, like all /course/[course-name] pages or only your /checkout page.
4. Edit variants for targeted pages (optional): If you want to adjust the AI-generated copy for a specific targeted page, go to the Variants Edit section in your SeaText dashboard, select the URL and language, and review or edit the translations and copy variations directly.

All changes made via SeaText page-level targeting are client-side, meaning they do not alter your actual Thinkific page content in your dashboard. Only visitors to the targeted pages will see the AI-optimized copy.

Common Use Cases for Targeted Thinkific Pages

Page-level targeting is most useful for Thinkific creators who want to test optimizations on specific high-impact pages without affecting their entire site. Common use cases include:

• Testing new course sales pages: Turn on SeaText AI only for your new course sales page to test headline, CTA, and offer variations, without changing your existing high-performing course pages.
• Aligning paid ad landing pages with keyword intent: If you run Google or Meta ads to a specific course landing page, use page-level targeting to rewrite that page's copy to match the ad's keyword and promise, improving conversion rates and ad Quality Score.
• Translating only high-priority pages: If you're expanding to a new market, you can target only your paid course sales and enrollment pages for translation, instead of translating your entire site of free course content, to save on translation volume and costs.
• Running A/B tests on high-traffic pages: Use page-level targeting to run A/B tests only on your top-performing enrollment pages, so you can test copy variations without affecting lower-traffic pages where test results would take longer to gather.
• Avoiding changes to sensitive pages: Exclude checkout pages, student account dashboards, and free course content from SeaText activation to avoid breaking user flows or altering content you don't want changed.

Limitations of Page-Level Targeting for Thinkific

There are a few key limitations to keep in mind when using page-level targeting for Thinkific:

• Page-level targeting is only available on paid SeaText plans. The free tier applies all enabled AI features to your entire Thinkific site automatically, with no option to restrict to specific pages.
• URL pattern matching uses path-based rules, so you will need to write specific patterns to target only the pages you want. For example, targeting /course/ will apply to all pages with that path, while targeting /course/advanced-seo will apply only to that specific course page.
• Page-level targeting rules only apply to the Thinkific domain you linked to your SeaText account. If you use multiple Thinkific sites or custom domains, you will need to link each domain separately and create rules for each.
• SeaText's client-side modifications do not change your actual Thinkific page content in your dashboard. If you want to make permanent changes to your page copy, you will need to update the content in Thinkific directly after testing winning variants in SeaText.

Frequently Asked Questions

Can I use page-level targeting on Thinkific checkout pages?

Yes, you can create page-level targeting rules for your Thinkific checkout pages if you want to apply AI optimizations there. Many course creators exclude checkout pages from SeaText activation to avoid disrupting the payment flow, but you can target them if you want to test copy changes on that step.

Does page-level targeting work with Thinkific custom domains?

Yes, page-level targeting works with any Thinkific custom domain you link to your SeaText account. As long as the SeaText script is installed on the custom domain's site footer, you can create page-level rules for any URL on that domain.

How many page-level targeting rules can I create on a paid SeaText plan?

All paid SeaText plans include unlimited page-level targeting rules. You can create as many rules as you need for different page groups, URL patterns, or test groups, with no extra fees.

Will page-level targeting affect my Thinkific SEO rankings?

No. SeaText's client-side modifications do not alter the actual HTML content of your Thinkific pages that search engines crawl. The AI-optimized copy only appears for human visitors, so it will not impact your SEO rankings or page load speed. SeaText's script runs in under 15ms before visual paint, so it does not cause Cumulative Layout Shift or hurt PageSpeed scores.

Can I turn off SeaText on specific Thinkific pages after enabling it?

Yes, you can edit or delete page-level targeting rules at any time in your SeaText dashboard. If you remove a page from a targeting rule, SeaText will stop applying AI optimizations to that page immediately, and the page will revert to your original Thinkific content for all visitors.

Does page-level targeting cost extra on paid SeaText plans?

No, page-level targeting is included for free on all paid SeaText plans. There are no additional fees for creating rules, running per-page tests, or targeting specific page groups. Pricing is based solely on your total monthly page views across all active pages where SeaText is enabled.