How to Trigger SeaText AI Activation After Installing the Script
After installing the SeaText script, you must visit or refresh your website several times and stay on the page for at least 40 seconds. Then wait about five minutes for your website name to...
After you install the SeaText script, activation is a separate step. You need to visit or refresh your website several times, stay on the page for at least 40 seconds, then wait up to five minutes for your domain to appear next to the SeaText logo. Only then can you go to the Main AI Hub and turn on the AI agents for the pages you want.
This guide walks through the exact steps, the prerequisites, and a verification check. It also covers common mistakes and what to do when activation doesn't work.
How activation works
The SeaText script sits on your page but does nothing until it is linked to your account. According to the official integration guide, the AI remains inert until activated. That means installing the script alone won't change your headlines, run tests, or translate content. Activation connects your website to your SeaText account and allows the AI to start processing visits.
Why do you need to stay on the page for 40 seconds? That delay gives SeaText time to associate your browser session with your account. The script collects the visit data and sends it to the SeaText servers. The 40-second dwell time ensures the session is real and not a bot or accidental click. Once the servers link the traffic to your account, your domain appears next to the logo.
This linking step is critical. Without it, the AI has no way to know which website owns the script. The 40-second visit acts as a handshake between your site and your account.
Platform and domain requirements
Before you start, make sure your setup meets SeaText's restrictions.
- Real domain only: Localhost is restricted for security reasons. Dynamic development domains may not work because SeaText cannot reliably associate traffic with your account. Use a valid, publicly reachable domain.
- WPEngine users: If you are on WPEngine, download and install the WP Engine plugin that lets you add custom JavaScript to all pages. Apply it site-wide. Without this, the script may not load on every page.
- One account per domain: Each SeaText account is linked to a single primary URL. If you need SeaText on multiple websites or domains, create a separate account for each. Do not share one account across multiple domains.
Before you begin: decision checklist
Use this checklist to confirm you are ready to activate.
- I have a SeaText AI account. (Create one if you don't.)
- My website uses a real domain, not localhost or a dynamic dev domain.
- I have copied the SeaText JavaScript code from the General Integration page.
- I have added the code to my website—either directly or via a plugin (WPEngine users need the custom JS plugin).
- I have visited my website at least once after adding the script.
- I understand that activation requires multiple visits and a 40-second dwell time.
If you checked all items, you are ready to proceed.
Step-by-step activation after installing the script
Follow these steps in order. Don't skip the waiting time.
- Open your website in a browser. If the page is already open, refresh it.
- Visit or refresh the site several times. The guide asks you to do this more than once.
- Stay on the page for at least 40 seconds. This activates the AI and links it to your account.
- Wait at least five minutes.
- Check the top of the SeaText page for your website name next to the SeaText logo. When it appears, your website is connected and ready for the next step.
- If you don't see it after 10 minutes, contact SeaText support immediately. This could mean there is an installation issue on your platform.
- Go to the Main AI Hub.
- Activate the AI you need on your preferred pages.
- Click "Configuration" to adjust the AI parameters.
Optional editing: SeaText provides an initial round of automatic translations and variants for testing. Log in to your account, go to "Variants Edit" in the left panel, select the URL and language, and review or edit the variants.
What happens after activation
Once your domain appears next to the SeaText logo, you can enter the Main AI Hub. This is the central control panel for all AI agents. Here you can turn on the specific agents you need—such as the Google Ads Optimizer, Translation Agent, or Bot Protection Agent.
After activating agents, click "Configuration" to adjust their parameters. For example, you can set which pages to optimize, what languages to translate into, or how aggressive the A/B testing should be. The configuration is per agent and per page.
You can also visit the "Variants Edit" panel. This shows the initial translations and copy variants the AI created. You can review, edit, or approve them. This is optional but useful for quality control.
All these actions happen after the activation step. The script remains inert until you complete the 40-second visit and wait for the domain to appear.
How to verify activation worked
The clearest signal is your website name next to the SeaText logo at the top of the SeaText page. The guide says to wait at least five minutes before checking. If the name appears, the script is connected to your account and you can move to the Main AI Hub.
The integration page also lists "Seatext content versions" and "Seatext content sitemap" as sections, but the published guide doesn't explain what they show. Use the logo check as your main confirmation.
Common mistakes and troubleshooting
- Pasting the script and doing nothing else. The AI stays inert until you trigger activation with visits or refreshes.
- Leaving the page too quickly. You need at least 40 seconds on the page.
- Checking too early. Wait at least five minutes, not one minute.
- Using localhost. It is restricted. Use a real domain.
- Sharing one account across multiple domains. Each domain needs its own account.
- Waiting longer than 10 minutes without contacting support. At that point, the guide says to reach out.
Limitations and when this process doesn't apply
These activation steps apply to websites with a valid, publicly reachable domain. They do not apply if you are running on localhost. Dynamic development domains may not work because SeaText may be unable to associate traffic with your account.
Each SeaText account is tied to one primary URL. If you need SeaText on multiple websites or domains, create a separate account for each. Also, this guide covers activating the script and connecting your domain. It doesn't cover the detailed setup of each AI agent after you reach the Main AI Hub.
Key facts at a glance
| Topic | Fact from SeaText's guide |
|---|---|
| Activation trigger | Visit or refresh your website several times and stay on the page for at least 40 seconds. |
| Connection signal | Your website name appears next to the SeaText logo at the top of the page after about five minutes. |
| Time limit | If the name isn't there after 10 minutes, contact support. |
| Account requirement | You need a SeaText AI account before installing the script. |
| Multiple domains | Create a separate account for each domain; each account is linked to one primary URL. |
| Where activation happens | In the Main AI Hub, where you activate AI on preferred pages and adjust Configuration. |
Terms you will see during activation
- Inert script: The JavaScript sits on your page but does nothing until activated.
- Primary URL: The main address linked to your SeaText account.
- Main AI Hub: The area where you turn on AI agents for your pages.
- Configuration: The controls for adjusting AI parameters.
- Variants Edit: A panel for reviewing, creating, or manually editing translations and variants.
Frequently asked questions
Why doesn't the AI start right after I paste the script?
The script is designed to remain inert until activated. Activation happens when you visit or refresh your site several times and stay on it long enough for the AI to link traffic to your account.
How long does activation take?
Plan for about five minutes after your visits. The guide says to wait at least five minutes before expecting your website name next to the logo.
Can I activate SeaText on localhost or a staging site?
Localhost is restricted, and dynamic development domains may not work reliably. Use a valid, real domain.
Do I need a separate account for each website?
Yes. Each SeaText account is linked to a single primary URL, so create one account per website or domain.
What should I do if I don't see my website name after 10 minutes?
Contact SeaText support immediately. The guide says this could indicate an installation issue that may need assistance.
Where do I actually turn on the AI?
After your domain appears next to the logo, go to the Main AI Hub, activate the AI on your preferred pages, and click Configuration to adjust the settings.
Further reading and comparison sources
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Further reading and comparison sources
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Learn more
Visit the website for more information.