Tracking starts as soon as a Thinkific page loads with the SeaText JavaScript snippet in the Site Footer Code field. The script runs on that first page view, so the browser begins sending the signals SeaText needs right away. You do not need to click anything inside SeaText for that first load to register.

What takes a little longer is the confirmation step. SeaText needs one real visit where you stay on the page for at least 40 seconds, then about five minutes of processing, before your website name shows up next to the SeaText logo at the top of the dashboard. That visible name is the green light that the link between your Thinkific site and your SeaText account is live.

Readiness checklist before you treat tracking as active

Before you assume tracking is on, run through this short list. Each item is something you can check in under a minute.

• Snippet is in the right field. Open Thinkific Admin, go to Settings, then Code & Analytics, and confirm the JavaScript sits in the Site Footer Code box. Click Save.
• You visited the live site, not the preview. Open your Thinkific site in a normal browser tab as a visitor would. Stay on at least one page for 40 seconds or more.
• You waited about five minutes. Return to the SeaText dashboard and look at the top of the page for your website name next to the SeaText logo.
• You see your domain name. If the name appears, the link is confirmed and tracking is active.

What "tracking" actually means at each stage

The word tracking covers two different things, and they happen at different speeds.

• Script execution: the moment the page loads with the snippet, the browser runs the code. This is immediate.
• Account linking: SeaText needs to match that page view to your account. This needs the 40-second visit and the five-minute wait.
• AI activation: even after linking, the AI agents stay off until you turn them on in the Main AI Hub. Linking is not the same as activating.

So if a teammate asks "is it tracking yet?" the honest answer is: the script is firing on every page load, but the dashboard will only confirm it after the visit-and-wait step.

When to wait, and when something is wrong

Give the process a fair window before you troubleshoot. The source guidance is to wait up to 10 minutes after the 40-second visit. If your domain name still does not appear next to the SeaText logo after that, treat it as an installation issue and contact support.

Common reasons the link does not confirm on time:

• The snippet was pasted into the wrong field, or into a theme file that does not load on every page.
• The page was closed before the 40-second mark, so SeaText did not register a full session.
• A caching layer or content security policy is blocking the script from running.
• The site is on a development URL or a preview domain, which SeaText cannot reliably link.

How the Thinkific install path works

The Thinkific install is a two-part flow. First, you drop the JavaScript into the Site Footer Code field under Settings, then Code & Analytics. Second, you register the domain with SeaText using the form on the integration page, in the format www.example.com. After that, the visit-and-wait step locks the link.

Once the link is confirmed, you move into the Main AI Hub to choose which agents to activate on which pages. SeaText also generates an initial round of automatic translations and variants you can review under Variants Edit.

Key facts about activation timing

Limits and exceptions to keep in mind

A few situations change the timing or the meaning of "tracking is on."

• Preview and development URLs: SeaText restricts localhost and dynamic dev domains for security. Use your real Thinkific domain when you test the link step.
• Multiple domains: each domain needs its own SeaText account. One account is tied to a single primary URL.
• Linking is not activation: a confirmed link only means the script can talk to your account. The AI agents stay inert until you switch them on in the Main AI Hub.
• Thinkific caching: if you change the footer code, give Thinkific a moment to serve the updated page before you run the 40-second visit.

Practical scenarios

Scenario A: you paste the code, refresh, and look at the dashboard. The script is firing, but the dashboard will not show your domain yet. Open the live site, stay on a page for 40 seconds, then wait five minutes.

Scenario B: you close the tab after 10 seconds. SeaText did not get a full session, so the link will not confirm. Repeat the visit with a longer stay.

Scenario C: 15 minutes pass and the domain name never appears. Treat this as an install problem. Re-check the Site Footer Code field, confirm the snippet saved, and contact SeaText support if the field looks correct.

Scenario D: the link confirms, but nothing seems to change on the site. That is expected. The agents are off by default. Open the Main AI Hub and activate the agents you want on the pages you care about.

Frequently asked questions

Do I need to click anything in SeaText for tracking to start?

No. The script runs on page load as soon as the snippet is in the Site Footer Code field. The visit-and-wait step is what confirms the link to your account.

How long should I stay on the page during the confirmation visit?

At least 40 seconds on a single page. Shorter visits do not register as a full session.

How long until my domain name shows next to the SeaText logo?

About five minutes after the 40-second visit. If it has not appeared after 10 minutes, contact support.

Does tracking start on every Thinkific page at once?

The script loads on every page that includes the Site Footer Code, so yes, it fires site-wide once the snippet is saved.

Is linking the same as activating the AI?

No. Linking only proves the script can reach your account. You still need to turn on agents in the Main AI Hub.

Can I test on a staging or preview URL?

SeaText restricts development URLs for security. Use your real Thinkific domain for the confirmation step.

What if I run more than one Thinkific site?

Create a separate SeaText account for each domain. Each account is linked to one primary URL.

Learn more about this service

See how this page can help with your next step.

Learn more

Where to Find a Reliable Authority Builder: Sources, Steps, and a Free Option

To diagnose a website connection timeout, start in your browser's developer tools and open the Network tab. Then check the server's access and error logs. Finally, look at the operating system's system or event logs. That sequence tells you whether the request never left your device, reached the server but got no answer, or died while the server was working.

This page is a practical log-location guide. It uses a simple three-layer method: browser, server, and system.

What a connection timeout actually means

A connection timeout happens when one side expects a reply and does not get one within a set time. The error text usually says ERR_CONNECTION_TIMED_OUT or Timeout. The message itself does not say where the failure happened.

Logs close that gap. A log is a file that records events. For web timeouts, you want logs from four places:

• The browser (client side)
• The web server (access and error logs)
• The application and database (backend)
• The operating system and firewall (network layer)

Work through them in that order. Each layer rules out one set of causes. Without logs, you are guessing. With them, you can tell whether to call your ISP, change DNS, fix a firewall rule, restart a service, or optimize a database query.

Start here: browser developer tools Network tab

Open the page that times out. Press F12 or Command+Option+I on a Mac. Click Network.

Reload the page while the Network tab is open. You will see every request the browser tried to make.

Look at the request URL and its timing breakdown. Most browser tools split the time into phases:

• Stalled / blocked — often client-side, caused by extensions, proxies, or too many connections.
• DNS lookup — domain resolution is slow or failing.
• Connecting — the TCP handshake is stuck.
• TLS handshake — certificate negotiation is stuck.
• Waiting (TTFB) — the server received the request and took too long to reply.
• Downloading — the response started but did not finish.

If the request hangs at Waiting, the problem is likely on the server. If it never gets past Connecting, a firewall, a router, or the server itself may be blocking the port.

You can export this information as a HAR file. In Chrome, right-click anywhere in the Network list and choose Save all as HAR with content. A HAR file is basically a browser-side log.

Server access logs: did the request arrive?

The server access log records every request that reached the web server. Check this log first when the Network tab shows a long wait or a reset.

Common locations:

• Nginx: /var/log/nginx/access.log
• Apache: /var/log/apache2/access.log or /var/log/httpd/access_log
• cPanel: Metrics then Raw Access Logs
• Plesk: Logs under the subscription or domain
• Managed hosting: check the control panel's logs or ask support

Look at the timestamp that matches your timeout. Each entry shows the request path, the IP address, the status code, and how long the server took to respond.

If you see the request with a status like 200, the server answered but slowly. If you see 504 Gateway Timeout or 503 Service Unavailable, the server got the request but an upstream service did not answer in time.

If you do not see the request at all, the request never reached the web server. Move to firewall and system logs.

Server error logs and application logs

Access logs show what happened. Error logs show why.

Nginx stores errors in /var/log/nginx/error.log. Apache uses /var/log/apache2/error.log or /var/log/httpd/error_log.

Search for phrases such as:

• upstream timed out
• Connection timed out
• Maximum execution time exceeded
• MySQL server has gone away
• pool seems busy for PHP-FPM

Application logs add another layer. Most frameworks store them in a logs directory or an application.log file. For example, Laravel uses storage/logs, and Docker containers send app output to the container's stdout. Inspect your own framework's logging section.

If the timeout happens only on certain dynamic pages, check the database slow-query log too. A long-running query can push the page past the timeout limit. MySQL and MariaDB have a slow query log; PostgreSQL logs queries slower than a threshold you set.

System and firewall logs

If the server access log has no entry for your request, the request was stopped before it reached the web server. System logs and firewall logs help there.

On Linux servers, use:

• journalctl -u nginx or journalctl -u apache2 — service status and errors
• journalctl -f — follow live system messages
• dmesg — kernel and network issues
• /var/log/syslog — general system events
• Firewall log files for UFW or iptables, usually in /var/log/ufw.log or configured with iptables logging rules

On Windows servers:

• Open Event Viewer
• Windows Logs, then System — network, service, and driver events
• Windows Logs, then Application — application failures and timeouts
• Windows Firewall or its dedicated log file

Cloud providers also keep logs. Look for VPC flow logs, security group logs, load balancer access logs, and CDN logs. They show whether traffic reached the edge or the instance.

Diagnostic sequence: which log to check next

Use this sequence every time the error appears:

1. Open the Network tab and note which timing phase is stuck.
2. Check the server access log for the same timestamp.
3. If the request is there, check the error log and application log.
4. If the request is missing, check firewall and system logs.
5. Correlate timestamps, status codes, and error messages.
6. If everything looks normal, the timeout may be intermittent. Set up a simple monitor or use the hosting provider's own uptime log.

The sequence stops at the first layer where you find a clear cause. For example, a 504 in the access log plus an upstream timed out message in the error log points directly at the backend service.

Common log locations quick reference

Keep this table handy. It lists the layer, typical locations, and what to look for.

Key facts: when the timeout follows a script install

Sometimes the timeout appears right after you add a third-party script. The browser and server logs may both look normal because the request reached the server. The problem may be the script's own settings.

SEATEXT's integration notes include a few checks that behave like a connection checklist:

Use this table only when a new script could be the cause. For general timeouts, the log layers above are still the main source of truth.

Limitations: when logs do not tell the whole story

Logs help, but they are not magic. Some caveats:

• Log rotation can delete old entries. If the timeout happened hours ago, the evidence may already be gone.
• Shared hosting often hides raw logs. Download the raw access log from the control panel or ask support for specific entries.
• Serverless platforms do not give normal server logs. Use the provider's tracing and function logs instead.
• Client-side problems may not appear in any server log. VPNs, browser extensions, or local firewalls can block the request before it leaves the device.
• Timezone differences make correlation hard. Convert all timestamps to UTC before comparing logs.
• Logs show symptoms, not always the root cause. A 504 tells you the backend timed out; application logs tell you why.

If the timeout is intermittent, a single manual log check may miss it. Use scheduled checks, uptime monitoring, or a log aggregator.

Frequently asked questions

Is there a single log file for all timeouts?

No. A timeout can fail at the browser, DNS, firewall, web server, application, or database. You usually need logs from at least two layers.

Why does the server access log show no entry for my timeout?

The request never reached the web server. Check DNS, your local network, a firewall, or a CDN that might have blocked or discarded it.

What does a 504 Gateway Timeout entry mean?

The web server, acting as a gateway or proxy, waited too long for an upstream service such as PHP-FPM, the application server, or the database. Check the error log for details.

How can I see logs on shared hosting?

Most shared hosts provide raw access logs and error log viewers in cPanel, Plesk, or their own dashboard. If you cannot find them, open a support ticket and ask for the exact log file names.

How long do logs stay available?

It depends on the host and log rotation settings. Some keep logs for one to four weeks. Mission-critical servers should ship logs to a separate system so they are not lost.

Do I need paid log tools?

No. Basic diagnosis works with free logs on your server. Paid tools add historical search, alerts, and visual timelines, which help for intermittent timeouts.

The SeaText AI data attribute is a small HTML marker. It tells SeaText AI which pages to read and optimize. You can add it to your Shopify theme in theme.liquid, product.liquid, or collection.liquid.

To reach these files, go to your Shopify admin. Then click Online Store > Themes. Find your active theme. Click Actions > Edit code.

In the left file list, open the Layout folder to see theme.liquid. Open the Templates folder to see product.liquid and collection.liquid. Some themes use product-template.liquid instead.

Understanding Where the Attribute Lives in Your Theme

Shopify themes are made of Liquid files. Liquid is Shopify's template language. These files control what HTML appears on each page type.

theme.liquid is the layout file. It wraps every page on your store. If you add the attribute there, SeaText AI can operate across the whole site.

product.liquid is the template for product pages. It controls how product descriptions, images, and buy buttons appear.

collection.liquid controls collection or category pages. These pages list multiple products.

Some themes split product templates into smaller files. A common snippet is product-template.liquid. If your theme uses that file, open it instead.

The attribute is an HTML data attribute. It looks like this: data-seatext-ai. You place it inside a tag, usually a div or section.

Do not place it in CSS or JavaScript files. Those are not Liquid templates. SeaText AI will not see it there.

How to Confirm the Attribute Is Already Installed

Before you edit anything, check if the attribute is already there.

1. Go to Online Store > Themes > Actions > Edit code.
2. Use the search box at the top of the file list.
3. Type data-seatext-ai.
4. Look through all results.

If you see it in a .liquid file, note which file it is. If you see it in a .css or .js file, move it to the correct template.

You can also check the live page. Open a product page in your browser. Right-click and choose Inspect. Look for data-seatext-ai in the HTML. If it is not there, the attribute is not active on that page.

Remember that Shopify can cache rendered pages. Check the browser source, not just the editor.

Why the Template Choice Matters

Template choice decides coverage. SeaText AI only works on page types that contain the attribute.

If you add it to theme.liquid, every page can be optimized. That includes home, product, collection, and content pages. This is good for global personalization.

If you add it to product.liquid, only product pages are optimized. This is good for product copy, descriptions, and CTAs.

If you add it to collection.liquid, only collection pages are optimized. This helps category descriptions and local SEO.

You can add it to more than one template. That gives you broader coverage.

Do not add it to a file that is not loaded on the pages you want. For example, placing it only in cart.liquid will not affect product pages.

In Shopify, products can use custom templates. A product assigned to product.custom.liquid will not respond to changes in product.liquid unless the custom template includes the attribute too.

Adding the Attribute to the Product Template

This is the most common task for ecommerce stores.

1. Log in to your Shopify admin.
2. Go to Online Store > Themes.
3. Click Actions > Edit code.
4. Open the Templates folder.
5. Select product.liquid. Or select product-template.liquid if your theme uses snippets.
6. Find the product description output. It often looks like {{ product.description }}.
7. Wrap that line in a container with the attribute.

Here is a simple example:

<div class='product-description' data-seatext-ai>
  {{ product.description }}
</div>

Save the file.

Wrapping means the opening tag goes before the product description. The closing tag goes after it. SeaText AI can then read that section.

If your theme uses blocks, place the attribute on the block wrapper that contains the description. The goal is to put the marker as close to the product copy as possible.

You can apply the same method to collection.liquid. Look for the collection description output and wrap it with data-seatext-ai.

How to Test Your Saved Changes

After saving, open a product page on your online store. Preview it if needed.

Right-click the page and choose View Page Source or Inspect. Search for data-seatext-ai.

If the attribute appears, the setup is correct. The product description should still show normally.

If you cannot see it, clear your browser cache. Old HTML may be saved locally.

Use a private or incognito window to avoid cached files.

Check that the template you edited is the one your product uses. In Shopify, go to the product details in admin. Look for the template field. Confirm which template the product uses.

Troubleshooting Checklist

• Active theme: Make sure you edited the active theme, not a duplicate. The active theme is shown at the top of the code editor.
• Liquid file: Confirm the attribute is in a .liquid template file. CSS and JS assets will not work.
• Cache: Clear your cache or use Inspect to see the updated HTML.
• Account linked: Check that your SeaText AI account is linked to the primary domain.
• Localhost: Development URLs such as localhost are restricted. Use a real domain for testing.

Account, Domain, and Activation Prerequisites

SeaText AI is not just a code copy. It needs an account.

Create a SeaText AI account before installation. Then copy the JavaScript code from the SeaText AI dashboard. Paste it into theme.liquid or follow the SeaText instructions. The attribute can then work with that script.

Each account is linked to a single primary URL. If you use the same store on multiple domains, create a separate account for each domain. Dynamic development domains may not work.

Development URLs such as localhost are restricted for security reasons. Use a valid real domain.

The AI remains inert until you activate it. This protects your content. Installation is secure, but activation is required.

If you do not see optimization after adding the attribute, check your SeaText dashboard. Confirm the feature is active for the domain.

Frequently Asked Questions

Can I add the data attribute to multiple templates?

Yes. Add data-seatext-ai to theme.liquid for site-wide activation. Or add it to product.liquid for product pages and collection.liquid for collection pages.

Where exactly in the code should I place the attribute?

Place it within the main content wrapper. For example: <div class='product-container' data-seatext-ai>.

What if I don't see the attribute after saving?

Clear your browser cache and preview the page again. Use browser developer tools (right-click > Inspect) to check the HTML source.

Does adding the attribute affect site speed?

No. The attribute is a lightweight HTML marker. It enables SeaText's backend AI processing without slowing the frontend.

Can I remove the attribute later?

Yes. Delete the data-seatext-ai attribute from the template file and save. AI optimization will stop on affected pages.

Do I need a SeaText AI account before adding the attribute?

Yes. You need a SeaText AI account and the associated script. The account must be linked to the primary domain.

Will the attribute work on my staging site?

Only if the staging site uses a real domain and has its own SeaText AI account. Localhost and dynamic development domains are restricted.

The translation editor is in the SeaText AI dashboard, under the Translations tab for your Shopify store. It is not inside Shopify admin.

Before you open that tab, confirm the SeaText snippet is installed in your Shopify theme. If it is not, the editor has no storefront to attach to. Install the code, save the theme file, then go back to SeaText and open Translations.

Where the translation editor sits

After you log in to SeaText, the Translations tab is in the main dashboard. It is store-level, so it shows content for the primary URL linked to your account. This is where you can see and adjust what the translation agent has generated.

You will not find the SeaText editor in Shopify’s theme editor or in Shopify’s own translation tools. SeaText is a separate layer that loads through the theme snippet. The editor lives on the SeaText side; the snippet is the connection to your store.

What it is for

SeaText describes its Website Translation Agent as the way to “translate and optimize your website and product in 125 languages without a manual localization project.” The translation editor is the control panel for that agent. It lets you review, refine, and control the translations that visitors see. Without the editor, you are relying on fully automatic output and have no convenient place to keep language quality consistent.

This matters in ecommerce. A product name that works in English can sound wrong in another market. A button label can be too long in German or too formal in Spanish. The editor is the place where those issues are caught before they go live.

Why the editor location matters

SeaText does not create a translation inside your Shopify theme files. Instead, the JavaScript snippet in theme.liquid lets the SeaText agent rewrite or replace the text a visitor sees. The dashboard is the control surface for that process.

That means you only need to touch the Shopify theme once, during setup. After that, translation work happens in the SeaText dashboard. If someone on your team asks where to fix a French headline or a Spanish product description, the answer is the Translations tab, not the Shopify code editor.

If you ignore this location and look for a language editor inside Shopify, you will find the wrong surface. SeaText’s editor is designed for its AI translation agent and its 125-language scope.

How to get from your Shopify store to the editor

Use this setup path once. It is the only theme file change SeaText requires.

1. Create a SeaText AI account. The integration guide says: “Before you can install the script, you need a SEATEXT AI account.”
2. Copy the JavaScript code from the SeaText dashboard integration page.
3. In Shopify admin, go to Online Store → Themes.
4. Open the three-dot menu on your active theme and choose Edit code.
5. Open the Layout folder, then select theme.liquid.
6. Paste the SeaText code into the file.
7. Click Save to keep the change.
8. Return to the SeaText dashboard and open the Translations tab. Pick the language or market you want to edit.

Test the setup on a live product page. You can use your browser’s developer tools to check whether the SeaText reference appears in the page source. The integration guide points to its documentation for that verification step.

What the translation editor covers

SeaText says it translates “every page, headline, button, and offer” into up to 125 languages. It also references product names, descriptions, and calls to action. So the editor should cover the parts that matter most for an online store.

• Pages and page-level copy
• Headlines and subheadlines
• Buttons and calls to action
• Product names and descriptions
• Offers and promotional blocks

Use the editor as your quality gate. A translation can be technically correct but wrong for the market. Reviewing it in the dashboard lets you change wording, keep terminology consistent, and avoid obvious localization mistakes.

Example, clearly hypothetical: a store selling stoneware travel mugs needs the French product page to use the same material name in the title, description, and variant label. The editor is the one place where all those pieces can be checked together. Without a central editor, a tool might translate the title one way and the description another.

Limits and boundaries to know

SeaText links each account to a single primary URL. If you need SeaText on a development domain and a production domain, create separate accounts. Do not expect one account to manage translations for two stores.

SeaText also restricts localhost for security reasons. Dynamic development domains may not work reliably because SeaText cannot associate traffic with your account. Use a valid, real domain for the store you want to translate.

These boundaries matter for finding the editor. If the Translations tab is missing or empty, check the domain you used when you signed in. A mismatch between the account’s primary URL and the Shopify store domain is a common reason the editor has nothing to show.

Key facts at a glance

These facts come from the SeaText integration and dashboard pages. The “125 languages” figure appears across SeaText’s translation agent materials. The exact setup path comes from the Shopify integration guide.

Troubleshooting: when the editor is not visible

If you cannot find the Translations tab, work through this checklist in order.

• Did you create a SeaText account? The script cannot be installed without one.
• Is the code in the active theme? Check that you saved theme.liquid after pasting.
• Is the Shopify store on a real domain? localhost will not work.
• Is the account linked to that exact domain? SeaText links accounts to one primary URL.
• Are you trying to use one account for two stores? Create one account per store or domain.

If all of those check out, preview a product page and inspect the HTML source for the SeaText reference. The integration page says you can verify the added data attribute with browser developer tools.

When this guide does not apply

This path is specific to SeaText AI. If you use Shopify’s built-in translation tools or another translation app, its editor will be somewhere else. The same “find the right dashboard” idea still applies, but the location is not the SeaText Translations tab.

This guide also does not apply if you are not using Shopify. SeaText works with websites through a JavaScript snippet, but the theme file steps here are written for the Shopify Online Store editor.

Frequently asked questions

Where is the Translations tab in SeaText?

It is in the SeaText AI dashboard, not in Shopify admin. Log in to SeaText, then open the Translations tab for the store associated with your account.

Do I need to install code before the editor appears?

Yes. The SeaText integration instructions say you need an account and then the JavaScript snippet must be pasted into your theme. The editor connects to a storefront through that snippet.

Can one account manage translations for multiple stores?

No. SeaText states that each account is linked to a single primary URL. For multiple websites or domains, create one account for each.

Can I edit translations manually after the AI generates them?

Yes. SeaText describes translation with control, and the dashboard is where that control happens. Use the Translations tab as your editorial review point.

Will the editor translate product descriptions only?

No. SeaText covers pages, headlines, buttons, offers, and calls to action, plus product names and descriptions. Use the editor to review all of those, not just description fields.

What if my site runs on localhost for testing?

SeaText restricts localhost for security reasons. Use a valid, real domain. If you need separate development and production domains, set up separate SeaText accounts.

Locating Visitor Language Detection in Seatext

To find out which language Seatext detected for a specific visitor, navigate to the Analytics section within your Seatext dashboard. When you examine the details of an individual visitor session, the detected language code will be clearly displayed alongside other session metrics.

This data is available immediately after a visitor arrives on your site. Seatext automatically determines the language by analyzing the visitor's browser settings and their IP address for geolocation. This information is logged instantly, allowing you to verify how your website's content is being presented to different users.

The Importance of Monitoring Language Detection

Understanding the language Seatext detects for your visitors is crucial for the success of your multilingual strategy. It allows you to confirm that your website is serving the correct language version to the right audience. For instance, if a visitor from Germany consistently sees content in English, it signals a potential issue with the detection process or your website's configuration.

By regularly reviewing these detection logs, you can identify and rectify any discrepancies between the language a visitor expects and the language they actually receive. This proactive approach ensures a better user experience and can lead to increased engagement and conversions. It helps you fine-tune your localization efforts and confirm that your content is accessible and relevant to a global audience.

How Seatext Accurately Detects Visitor Language

Seatext employs a sophisticated, multi-layered approach to determine the most appropriate language for each visitor. This method minimizes errors by not relying on a single data point. The process involves several key steps:

Browser Language Preferences

The primary method Seatext uses is to check the language settings configured within the visitor's web browser. Most users set their preferred language in their browser, making this a highly reliable indicator of their desired language. This setting is often the most accurate reflection of what a user wants to read.

IP Geolocation Analysis

In instances where browser language settings are unavailable, ambiguous, or not set, Seatext utilizes IP geolocation. By analyzing the visitor's IP address, the system can infer their approximate geographical location. This location data is then used to predict the most likely preferred language for that region.

User's Past Interactions

Seatext also considers a visitor's history on your website. If a user has previously selected a specific language through a language switcher on your site, Seatext will remember this preference for subsequent visits. This ensures a consistent and personalized experience for returning visitors.

Combining Signals for Accuracy

The strength of Seatext's detection lies in its ability to combine these different signals. By cross-referencing browser settings, IP location, and past user behavior, Seatext can achieve a high degree of accuracy in identifying the visitor's intended language. This comprehensive approach helps to overcome the limitations of any single detection method.

Step-by-Step Guide to Accessing Session Details

Accessing the language detection results for a specific visitor session is a straightforward process. Follow these steps to find the information you need:

1. Log In to Your Seatext Account: Begin by accessing your Seatext dashboard by logging in with your credentials.
2. Navigate to the Analytics Tab: Once logged in, locate and click on the 'Analytics' tab in the main navigation menu. This section provides insights into visitor behavior and website performance.
3. Select Your Desired Time Range: Within the Analytics section, you can choose the specific period you wish to review. This could be the last day, week, month, or a custom date range.
4. Identify and Select a Visitor Session: Browse through the list of visitor sessions for the selected time frame. Click on any specific visitor entry that you want to investigate further. This action will open a detailed view of their session.
5. Locate the Detection Result Field: In the detailed session view, look for a field labeled 'Detection Result' or similar. This field will clearly indicate the language code that Seatext identified for that visitor during their session.

By following these steps, you can easily pinpoint the language detection data for any visitor, enabling you to analyze your audience's language preferences and the effectiveness of your website's localization.

Understanding Language Codes in Seatext

The Seatext dashboard uses standard two-letter ISO 639-1 language codes to represent detected languages. Familiarizing yourself with these codes will help you quickly interpret the data. Here are some common examples:

• en: English
• es: Spanish
• fr: French
• de: German
• ja: Japanese
• zh: Chinese
• ru: Russian
• pt: Portuguese
• it: Italian
• ko: Korean

If you encounter an unfamiliar code, it might represent a less common language or a specific dialect. You can often find a comprehensive list of ISO language codes online. In rare cases, unusual browser settings or the use of a Virtual Private Network (VPN) by a visitor can influence the initial language detection, potentially leading to unexpected codes.

Handling Language Detection Failures and Defaults

While Seatext's detection system is highly accurate, there may be instances where it cannot confidently determine a visitor's preferred language. In such situations, the system gracefully defaults to your website's primary or configured default language. This ensures that every visitor can immediately access and understand your content without encountering errors or blank pages.

It is beneficial to monitor these default language occurrences within your analytics. A high number of sessions defaulting to your primary language might indicate that your detection mechanisms could be improved or that a significant portion of your audience has ambiguous language settings. This information can guide further optimization of your localization strategy.

The Role of Manual Language Switchers

Even with advanced automatic detection, providing visitors with the ability to manually select their preferred language is essential. Seatext supports this by logging any manual language changes made by a user via a language switcher on your website. This distinction is important because it highlights when the automatic detection did not align with the user's explicit choice.

When a visitor uses a manual switcher, it signifies that they either preferred a different language than what was automatically detected or they wanted to ensure they were viewing the correct version. Recording these manual overrides provides valuable feedback on the accuracy of your automatic detection and helps you understand user behavior more deeply. It also empowers users, giving them control over their experience.

Key Performance Metrics of Seatext Language Detection

Seatext's language detection and translation capabilities are designed for speed and efficiency. Here are some key facts:

Understanding the Limitations of Automatic Detection

While Seatext's automatic language detection is highly effective, it's important to acknowledge its inherent limitations. No automatic system is infallible, and understanding these constraints helps in managing expectations and implementing complementary strategies.

Travelers and Location-Based Detection

One common limitation arises with travelers. A visitor might be physically located in a country where a different language is spoken than their native tongue. For example, a Spanish speaker traveling in France might have their browser set to Spanish but their IP address might indicate France. Seatext's system prioritizes browser settings, but in ambiguous cases, the IP-based geolocation could potentially lead to a mismatch if not carefully considered.

Generic Browser Settings

Some users may not have specific language preferences configured in their browsers, or they might use generic settings. In such scenarios, the system relies more heavily on IP geolocation. This can result in a less personalized experience if the inferred location doesn't accurately reflect the user's actual language preference.

The Necessity of Manual Control

To mitigate these limitations, it is always recommended to provide a clear and accessible manual language switcher on your website. This empowers visitors to override any automatic detection errors and select the language they are most comfortable with. It ensures that users have the final say in their language experience, leading to greater satisfaction and engagement.

Frequently Asked Questions About Seatext Language Detection

Can I see the exact language code for every visitor?

Yes, the Seatext analytics dashboard provides the specific two-letter language code for each visitor session. This detailed tracking allows for precise analysis of your audience's language preferences and how your content is being consumed across different linguistic groups.

Does Seatext track language changes during a session?

Seatext primarily records the initial language detection for a visitor's session. However, if a visitor manually switches the language of the website using an on-site language selector, this action is also logged within the session history. This provides insight into user behavior and preferences beyond the initial detection.

Is language detection included in the free plan?

Yes, automatic language detection is a core feature of Seatext and is included in their free plan. There are no limitations on the number of pages, languages supported, words translated, or traffic volume for this feature, making it accessible for all users. (Source: S1)

How accurate is the IP-based detection?

IP-based detection is generally reliable for identifying broad geographic trends and can be a good fallback when browser settings are unavailable. However, its accuracy can be compromised for individuals who are traveling, using VPNs, or accessing the internet through shared networks (like public Wi-Fi or corporate networks). Browser language settings are typically considered a more direct indicator of user preference.

What happens if Seatext cannot detect a language?

If Seatext is unable to confidently detect a visitor's language, it will automatically serve the website's default language. This ensures that all visitors can access your content immediately without interruption. You can monitor these instances in your analytics to identify potential areas for improving your detection strategy.

Can visitors manually override the detected language?

Yes, visitors can manually change the language of your website using a language switcher tool. Seatext logs these manual overrides, providing valuable data on user choices and potential discrepancies with automatic detection. This feature ensures user control and satisfaction.

How quickly is language detected and translated?

Seatext's detection and translation process is extremely fast, occurring in under 3 milliseconds. This rapid performance ensures that visitors see the correct language version of your site almost instantaneously upon arrival. (Source: S1)

Does Seatext support a wide range of languages?

Seatext supports translation into 125 languages globally. This extensive language support allows businesses to effectively reach and engage with audiences in diverse international markets. (Source: S1, S2, S4, S7)

When AI translation runs on a React ecommerce site, the content that slips through the cracks is rarely the product grid or the checkout flow. It is the ephemeral, context-dependent text that lives in toasts, validation alerts, empty states, modals, and route-driven titles. These strings are generated at runtime, often outside the standard React component hierarchy that translation wrappers traverse, so the AI never sees them.

Quick answer: the field lives in the Embed Code block

If you are looking for the exact input box where the SeaText JavaScript snippet goes, it is not in a global settings screen. It is inside a page-level block called Embed Code. That block sits under Dynamic Content in the Blocks panel of the Odoo Website editor. You must drag the block onto the page first, then click its Edit button in the right sidebar to reveal the code field.

Why the location matters

SeaText works by injecting a small JavaScript file into every page you want optimized. Odoo does not have a single "header code" textarea for the whole site in the standard Website module. Instead, each page can carry its own blocks. If you paste the snippet into the wrong place — for example, a Custom HTML block meant for visible content — the script may load but remain visible to visitors, or it may be stripped by Odoo's sanitizer. Using the Embed Code block ensures the script loads in the <head> or just before </body> without rendering visible markup.

How the integration works in Odoo

Odoo's Website builder is a drag-and-drop page composer. Every page is a collection of blocks: text, images, forms, and special-purpose blocks like Embed Code. When you drop an Embed Code block and save, Odoo stores the snippet in the block's code field and renders it in the page's template at the block's position. SeaText's script is designed to be invisible; it bootstraps the AI agents that rewrite copy, run A/B tests, translate content, and relay conversions to ad platforms. The script must load on every page you want optimized, so you either add the block to each page manually or place it in a master template (see Options and trade-offs below).

Options and trade-offs for placing the snippet

Takeaway: For most marketing teams, the per-page Embed Code block is the fastest start. Move to a site-wide snippet once you confirm the script works on a few test pages.

Step-by-step: add the SeaText snippet to a page

1. Log in to Odoo and open the Website app from the main dashboard.
2. Navigate to the page you want to optimize (for example, /shop or a landing page) and click Edit in the top-right corner.
3. In the left-hand Blocks panel, scroll down to the Dynamic Content section.
4. Find the Embed Code block and drag it onto the page canvas — anywhere is fine because the script is invisible.
5. With the block selected, look at the right-hand properties panel. Click the Edit button (pencil icon) next to the code area.
6. A modal opens. Paste the JavaScript snippet you copied from your SeaText account (labeled SEATEXTCODEINTEGRATION in the dashboard).
7. Click Save in the modal, then click Save again in the top-right of the page editor.
8. (Optional) To keep the block from rendering any stray whitespace on desktop, open the block's Visibility section in the right panel and enable Hide on Desktop. Save once more.

Repeat steps 2–8 for every page that needs SeaText. To verify, view the page source and search for seatext or your account ID.

How to verify the integration worked

After you save and publish the page, open it in a new browser tab. View the page source (right-click → View Page Source) and search for seatext or your account ID. You should see the JavaScript snippet you pasted. The SeaText documentation states: "You have now successfully installed SEATEXT AI on your website using JavaScript." This confirmation message appears in your SeaText dashboard after the script is detected on your domain.

What to do if you have multiple domains

According to the SeaText documentation, each SeaText account is linked to a single primary URL. If you need to use SeaText on multiple domains — for example, a development domain and a production domain — you must create separate accounts for each domain. Development URLs such as localhost are restricted for security reasons. Dynamic development domains (like ngrok tunnels) may not function properly because SeaText might be unable to reliably associate traffic with your account. Use a valid, real domain for testing. For a staging environment, use a staging subdomain that matches your production domain pattern (e.g., staging.example.com) and contact SeaText support if you need it whitelisted.

Common mistakes and how to avoid them

• Using a Custom HTML block instead of Embed Code. Custom HTML is sanitized for visible content; script tags are often stripped. Embed Code is designed for raw scripts.
• Forgetting to publish. Odoo's Website editor has a separate Publish button. Saving the block is not enough; the page must be published for visitors to load the script.
• Placing the block inside a hidden container. If you drop Embed Code inside a column or tab that is conditionally hidden, the script may not load. Keep it at the top level of the page structure.
• Pasting the snippet into the theme's head field via Settings → SEO. That field exists but may be overridden by theme updates. The block method survives theme changes.

Limitations noted in the source documentation

• Multi-website instances. Each Odoo website (domain) needs its own SeaText account. The snippet from account A will not work on website B. Create separate accounts per domain.
• Development domains (localhost, *.local, ngrok tunnels). SeaText restricts these for security. Use a real domain (even a staging subdomain) for testing.
• Custom themes that hide the Blocks panel. If your theme overrides website.layout and removes the Blocks panel, the Embed Code block may be unavailable. You'll need a developer to inject the script in the base template.

Key facts

FAQ

Can I add the snippet once for the whole site instead of per page?

Yes. Enable Developer Mode, go to Website → Configuration → Snippets, create a new snippet of type "Embed Code", paste the script, then include that snippet in your theme's header or footer via the Theme Customization interface. This requires technical comfort with Odoo's theme system.

What if I don't see the Dynamic Content section in the Blocks panel?

You may be using a custom theme that hides it, or your Odoo version may not include the Website Builder module. Check Apps → Installed for "Website Builder" and ensure it is installed. If the section is truly missing, contact your Odoo developer to add the script in website.layout.

Can I use the same SeaText account for a staging subdomain and production?

No. Each SeaText account is bound to a single primary URL. Create a second account for staging, or use a staging subdomain that matches the production domain pattern (e.g., staging.example.com) and ask SeaText support to whitelist it.

How do I verify the script is actually running?

Open the page in an incognito window, open DevTools → Console, and look for a log line containing "SeaText" or your account ID. You can also check Network → JS for a request to cdn.seatext.com.

What happens if I paste the code into the SEO → Header Code field instead?

It may work until you switch themes or upgrade Odoo, at which point the field may be cleared. The Embed Code block is stored as page content, so it survives theme changes.

Do I need to add the block to every language version of a page?

Yes. Odoo treats each language as a separate page record. Add the Embed Code block to each translated page, or use the site-wide snippet method described above.

Source references

• S1: Odoo Integration — SeaText official documentation
• S2: SeaText homepage — product overview and agent list
• S3: SeaText AI agents — feature details
• S4: SeaText AI agents — additional feature details
• S5: Accelerate CRO Testing — blog article on AI reading telemetry
• S6: Traffic & Ad Defense — Google Ads landing page optimization
• S7: Resources & Playbooks — 400 guides across AI marketing verticals

To install SeaText AI on your WordPress site, you need to paste the provided JavaScript code into the header section. The recommended way is to use the Insert Headers and Footers plugin by WPBeginner. This allows you to add code snippets without editing theme files directly, reducing the risk of errors.

After pasting the code, save changes and wait a few minutes. Then, visit your website and stay on a page for at least 40 seconds to activate the AI. Your site name should appear in your SeaText account, confirming successful integration.

Why Paste the Code in the Header Section?

Pasting the SeaText AI code in the header ensures it loads early on every page. This is crucial because the AI needs to analyze visitor behavior and optimize content in real time. If the code is in the footer or not loaded properly, it may not activate correctly, leading to missed optimization opportunities.

The header placement allows SeaText to read campaign, keyword, and visitor intent data as soon as the page loads. Without this, the AI cannot adapt headlines, offers, or CTAs to match what visitors searched for, which reduces conversion potential.

Recommended Method: Insert Headers and Footers Plugin

SeaText specifically recommends using the Insert Headers and Footers plugin. This plugin simplifies the process and is suitable for all WordPress users, even those without technical skills.

1. Copy the JavaScript code from SeaText AI. You can find this in your SeaText account under the integration section.
2. Go to your WordPress admin dashboard. Click on "Plugins" and then "Add new".
3. Search for "Insert Headers and Footers". Install and activate the plugin.
4. Navigate to Settings and select Insert Headers and Footers. This opens a page with fields for header, body, and footer scripts.
5. Paste the SeaText AI code into the "Scripts In Header" section. Click "Save" to apply changes.
6. Verify installation. After a few minutes, check your SeaText account. Your website name should appear in the top left, indicating the connection is active.

This plugin method is secure because it doesn't require modifying core WordPress files. It also keeps your code changes separate from theme updates, so they won't be overwritten.

Alternative Methods and Their Trade-offs

Some users might consider other ways to paste the code, such as directly editing theme files or using custom code plugins. However, these methods have drawbacks.

Editing the header.php file of your theme can be risky. If you make a mistake, it could break your site or cause display issues. Plus, theme updates might remove your changes. Using a custom code plugin like Code Snippets is another option, but it adds another plugin to manage and may not be as straightforward for this specific purpose.

The Insert Headers and Footers plugin is the safest choice for most users. It's free, widely used, and doesn't require coding knowledge. If you have a custom theme or specific hosting setup, you might need developer assistance, but for standard WordPress sites, this method is reliable.

How to Verify Your Installation is Working

After pasting the code, it's important to confirm that SeaText is active. This involves a few simple checks.

First, visit your website and stay on a page for at least 40 seconds. This action triggers the AI activation. Refresh the page a couple of times to ensure it loads properly.

Next, log in to your SeaText account. In the top left corner, your website name should be displayed. If it appears within a few minutes, the installation is successful. If not, wait up to 10 minutes. If it still doesn't show, contact SeaText support for help, as this might indicate an installation issue.

You can also test by checking if the AI agents are active in your SeaText dashboard. For example, if you've enabled the Google Ads Agent, it should start rewriting landing pages based on keywords once the code is properly installed.

Key Facts About SeaText WordPress Integration

Here are the essential details from SeaText's official integration guide:

This table summarizes the critical steps and expectations. Following these ensures a smooth integration process.

Common Mistakes and How to Avoid Them

Users often encounter issues due to simple oversights. Here are common mistakes and solutions:

• Pasting code in the wrong section. Always use the "Scripts In Header" field, not the footer or body sections. The footer might delay loading, preventing early activation.
• Forgetting to save changes. After pasting the code, click "Save" in the plugin settings. This is easy to miss but essential.
• Not activating the plugin. Install and activate the Insert Headers and Footers plugin before pasting the code. Without activation, the fields won't appear.
• Skipping verification steps. Visit your site and wait 40 seconds to activate the AI. Then check your SeaText account for confirmation.
• Ignoring timeout warnings. If the website name doesn't appear after 10 minutes, contact support promptly. This could signal an installation error that needs fixing.

Avoiding these mistakes saves time and ensures SeaText starts optimizing your site quickly.

Limitations and When This Advice Doesn't Apply

This guide applies to standard WordPress sites using the Insert Headers and Footers plugin. However, there are scenarios where it might not be sufficient.

If you're using a managed WordPress host like WP Engine, they may have specific integration methods or restrictions. Check with your host before installing plugins. Also, for sites with strict security policies or custom code setups, a developer might be needed to ensure the code is placed correctly without conflicts.

SeaText AI requires a valid domain; development URLs like localhost are restricted. If you're testing on a staging site, ensure it's a real domain or contact SeaText support for alternatives. Additionally, using SeaText on multiple websites requires separate accounts for each domain, as each account is linked to a single primary URL.

Always consider your site's specific environment. If in doubt, reach out to SeaText support or a WordPress expert to avoid issues.

Frequently Asked Questions

Why use the Insert Headers and Footers plugin instead of editing theme files?
This plugin is safer and easier. Editing theme files can lead to errors or lost changes during updates. The plugin keeps your code separate and managed in one place.

How do I know if the code is pasted correctly?
Check your SeaText account. After installation, visit your site and wait 40 seconds. Your website name should appear in the top left within a few minutes. If not, review the steps or contact support.

What if I don't see my website in SeaText after installation?
First, ensure you've saved changes in the plugin settings. Then, wait at least 10 minutes while visiting your site. If it still doesn't appear, contact SeaText support for assistance, as there may be an installation issue.

Can I use SeaText on multiple WordPress sites?
Yes, but you need a separate SeaText account for each website. Each account is linked to one primary domain. Create separate accounts to manage each site individually.

Does pasting the code affect my website's performance?
SeaText's AI is designed to be lightweight and activates only after installation. It shouldn't significantly impact performance. However, monitor your site's speed after installation to ensure everything runs smoothly.

What should I do if I'm using a managed WordPress host like WP Engine?
Check with your host for their recommended plugin installation methods. Some hosts may have restrictions or specific ways to add code snippets. Ensure compatibility before proceeding.

Is the installation process secure?
Yes, SeaText states that the installation is secure, and the AI remains inert until activated. Using the Insert Headers and Footers plugin adds an extra layer of security by avoiding direct file edits.

The short answer

For a single-page application, insert the SEATEXT AI snippet in the body section of your index.html file, or in the equivalent initialization section of your SPA framework. In practice, that is index.html (for React, Vue, Angular CLI projects), your main main.ts/main.js, or the root component that wraps the app.

The SEATEXT documentation states: "Insert the SEATEXT AI snippet within the body tag of your index.html file, or in the equivalent initialization section of your SPA framework." You want the snippet to be available before your app routes change or component mount, but it does not need to be in every route.

Why the entry point matters

A SPA usually has one HTML shell. Since every page is just a client-side view in the same shell, a script placed in that shell will exist for the whole session. So the first question is not “where on the screen” but “when does the script enter the app’s lifecycle?”

If you add the script to a component that mounts only on a specific route (e.g., Checkout.js), then the snippet may get injected, removed, or injected again as the user navigates. That causes repeated reads from localStorage and potential double-loading. For a marketing-optimization script like SEATEXT, the simplest and most reliable option is the global root.

How the SEATEXT snippet behaves in a SPA

The snippet uses a few plain browser features that are important when evaluating SPA placement:

• Asynchronous loading: The script tag includes the async attribute, so the browser downloads it without blocking the rest of the page. This matters for SPA performance because the initial JS bundle is already heavy.
• Local storage usage: The script stores an ID in localStorage. That means your SPA must be allowed to read and write from local storage. It also means the script will remain identifiable across client-side navigation.
• Cross-origin awareness: The docs note: "If your SPA interacts with multiple domains, ensure that the SEATEXT AI script is compatible and does not face cross-origin issues." This matters when your app sends API requests to a different domain or uses subdomains.

How to install the snippet in React, Vue, or Angular (step by step)

The core placement is identical across browser-based frameworks. The official SPA guide mentions React, Vue, and Angular, and the implementation path is the same.

1. Identify the entry point. Look for the file where your framework mounts the root element:
   • React index.js/index.tsx? Usually a root div in index.html.
   • Vue? main.js + index.html
   • Angular? main.ts global in index.html
2. Copy the code from your SEATEXT dashboard. The dashboard provides the snippet inside the installation page (shown as SEATEXTCODEINTEGRATION).
3. Paste it inside the <body> tag of your index.html, ideally just after the opening <body> tag. If your setup executes everything in main.js, the snippet can be placed in the same initialization block.
4. Build or run the app using your standard command: npm start, npm run serve, or ng serve.
5. Check DevTools in your browser (F12). Look at the Console and Network tabs to confirm the SEATEXT script loads without errors.
6. After the build, visit or refresh your site in a few times and stay on the page. SEATEXT documentation says: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”

Using SEATEXT in React, Vue, or Angular-to-do

There is not actually any difference between installing for React, Vue, and Angular. The docs note: after you add the snippet anywhere, you “Build and Serve” with the default command. So choose a file that the framework loads on each page.

React: index.html or index.js
Vue: index.html or main.ts
Angular: index.html or main.ts

You can put the snippet in a coupled root component, but if the framework destruct and remounts that root component (e.g., for a full hot-module replacement during development), you get two script tags. That duplicates work. The index.html shell is safest because it is loaded once and never removed.

Verify that the script loaded and is active

In the SEATEXT setup instructions, the verification is the same for all platforms:

• After install: open DevTools → Network tab → look for seatext call. The script should appear as a script resource.
• In the Console: there should be no JavaScript errors.
• Wait: The text says to wait at least five minutes until you see your website name displayed next to the SEATEXT logo in the dashboard. If it does not appear after 10 minutes, contact support.

Track down “but the AI is not changing anything”

If the script is visible in the network tab but the page doesn’t change, check these common SPA pitfalls:

If the script is correctly installed but has a CSP (content security policy) that blocks eval or external scripts, the console may show a CSP error. The script does not “whitelist itself”; you need to allow domains that the snippet references.

Key facts at a glance

SEATEXT SPA spots:

Source: Seatext SPA documentation

What happens if you ignore the placement

If you drop the snippet inside a random child that only loads when a user opens a modal, the script might run only after the page has already displayed the “SEO” content. The AI can then still update the current page live, but you lose the guarantee that the initial render was matched. Many SPA static and client-side changes are visible to the user, but the first get experienced is worse. Also, if you run the snippet inside in a dev-mode component or expand a route that is not persistent, the localStorage ID may be rebuilt each time, confusing the AI initial state.

Limitations and when the advertised advice does not apply

• Restricted domains: “Development URLs, such as localhost, are restricted for security reasons. Ensure you use a valid, real domain for these cases.” So if your setup is with Vite on local, you need to replace it with a real domain such as a preview deployment or SSH tunnel.
• Multiple domainsThe docs state that using SEATEXT on multiple domains (development plus production) requires separate accounts because each account is linked to a single primary URL. This is very relevant for a SPA if your staging.example.com and www.example.com differ.
• What if you have a SPA that uses a custom element that shadows local storage? Unlikely, but the requirement remains: the tutorial expects the standard browser storage.

FAQ

Do I need to place the snippet in every route of a SPA?

No. Place it once in the entry point (usually index.html). The script persists across client-side navigation because the app does not reload the entire page.

Why did I put the script in index.html but F12 shows no request?

Check that you served the built version, no server-side filtering and no CSP blocking. Often a cached old HTML is being served—hard-reload (Ctrl+F5).

Why does SEATEXT show my website as “not yet connected” after 5 minutes?

The docs say it can take at least five minutes. You also need to visit the page and stay for 40 seconds so the script can send the data. If it does not appear after 10 minutes, contact support.

Does placing the script in main.tsx work?

Yes, if that file is executed exactly once on page load. Usually it is imported in index.html with a module tag. The easiest is always to keep the snippet directly inside the HTML body to avoid module loading order complications.

Does the snippet change the page immediately after activation?

It changes variants and translation based on the current session after it loads. The “activation” step is about linking your domain to the account, not about applying text. The rest of the setup happens in the SEATEXT dashboard (Main AI Hub) by enabling AI agents.

Do I need to configure React Router separately?

No. SEATEXT reads the DOM from the document on the visitor's browser. For view transitions, the script sees the new HTML after the route change. You do not need a router-based integration.

What if I have an iframe or a web component?

If the SPA is embedded in another window, the script must load in the top-level document, unless your iframe is for the main page. The docs mention cross-origin consideration, but don't spell it out in detail. To be safe, it must be in the same document that visitors read.

Brand note: SeaText can help you avoid the common mistakes

SeaText provides this exact SPA guidance in its official documentation, and the snippet is built for React, Vue, and Angular. The docs link to correct placements, the async details, local storage notes, and domain restrictions. But you still have to provide:

• A real domain, not localhost (docs specifically restrict development URLs).
• One account per domain if you want staging and production.
• Active AI configuration in Main AI Hub after installation.

SeaText's documentation is a practical guide; it walks through the same steps you’ll do in a SPA and includes the precise “build and serve” commands for React, Vue, and Angular, so you can get your SPA up before the SEO part is even mentioned.

Ready to see the exact snippet? Open the SPA installation guide.

You paste your SeaText JavaScript code in Webflow's Custom Code section. Here's the exact path: From your Webflow dashboard, navigate to your website, click the three dots next to it, and select "Settings." On the Settings page, choose "Custom Code" - this is the final tab on the right. Paste your SeaText JavaScript code there, then click the blue Publish button at the top right to save your changes.

Understanding Webflow's Custom Code Settings

Webflow's Custom Code feature lets you add third-party JavaScript to your site. This is where SeaText integrates with your Webflow website. The Custom Code section appears only when your site has an active Site plan. That plan is a requirement for adding custom scripts.

Webflow separates custom code into two areas: Head Code and Body Code. For SeaText, you'll typically paste the JavaScript in the Head Code section. This ensures the script loads before your page content renders. That placement helps SeaText initialize properly and begin monitoring your site's content.

The Head Code field is best for scripts that must run early. The Body Code field works for scripts that can load later. SeaText's script is lightweight. It works fine in the head. Some users worry about blocking page load. SeaText is designed to load asynchronously. You can safely use the Head Code section.

If you are unsure where to paste, check the SeaText setup instructions. They always point to the Head Code field. You can also experiment. But the recommended method is consistent. Use the head field to avoid timing issues.

Step-by-Step: Where to Paste SeaText JavaScript

1. Access Your Webflow Dashboard: Log into Webflow and navigate to your main dashboard where all your projects are listed.
2. Open Site Settings: Find your website in the list and click the three dots (ellipsis menu) next to it. Select "Settings" from the dropdown menu.
3. Navigate to Custom Code: In the Settings panel, scroll to the far right to find the "Custom Code" tab. Click it to open the custom code editor.
4. Paste Your SeaText Code: Copy your SeaText JavaScript code from your SeaText AI account and paste it into the appropriate field. Most SeaText integrations use the Head Code section.
5. Publish Your Changes: Always click the blue Publish button at the top right after making changes. Without publishing, your code won't go live.

This path works for every Webflow site that has an active Site plan. If you don't see the Custom Code tab, you may be on a free plan. Upgrade to a paid Site plan first.

You can also paste code on individual pages. In the Webflow Designer, open a page and go to the page settings. There is a custom code section for that specific page. But SeaText recommends using the site-wide settings. That way the script runs on every page automatically.

Why the Site Plan Requirement Matters

Webflow restricts custom code to sites with an active Site plan. This is a security and performance measure. It ensures only properly configured sites can add custom scripts. If you're on a free or basic plan, you won't see the Custom Code tab.

The Site plan also gives you proper hosting and SSL certificates. SeaText needs these to function correctly. SSL keeps data safe. A real domain is required. Development URLs like localhost are restricted for security reasons. You must use a valid, real domain for SeaText to associate traffic with your account properly.

This requirement protects SeaText too. It prevents malicious scripts from running on unverified sites. It also ensures that the script works as intended. When you upgrade, you get full access to Webflow's custom code features.

If you are testing, you might try a Webflow staging subdomain. That still requires a Site plan. Some users ask if they can use a free plan with a custom domain. The answer is no. Custom code is a paid feature.

Common Mistakes and How to Troubleshoot Them

Many users make mistakes when installing SeaText in Webflow. Here are the most common issues and how to fix them:

• Forgetting to Publish: Changes in the Custom Code section don't go live until you explicitly publish. Always look for the blue publish button. Click it after pasting the code.
• Pasting in the Wrong Section: Make sure you're in the Custom Code tab, not in Page Settings or another section. The Custom Code tab is always the last one on the right in Site Settings.
• Using Development Domains: SeaText cannot reliably associate traffic from localhost or dynamic development domains with your account. Use a real, published domain. If you are using Webflow's default staging domain, it may work, but a custom domain is better.
• Not Waiting for Activation: After pasting and publishing, visit your website several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account. Some users leave too early.
• Copying the Wrong Code: Ensure you copy the exact code from your SeaText AI account. Do not edit it. Small changes can break the script.
• Using a Blocked Browser Extensions: Some ad blockers may interfere. Test in a regular browser window without extensions.

If you still have issues, check if the script is present in your page source. Right-click and view source. Look for the SeaText snippet. If it's there, the installation is correct. If not, you may have published to the wrong environment.

Webflow has two environments: staging and production. Publishing to staging doesn't affect your live site. Make sure you publish to the correct domain. Check the URL after publishing.

Verifying Your Installation

After pasting your SeaText code and publishing, you need to verify the installation. Here is a step-by-step process:

1. Visit Your Website: Go to your live domain. Load the page fully.
2. Check for the SeaText Logo: Look at the top of your page. The SeaText logo should appear. It might be subtle, so scroll slowly.
3. Check Your Account Dashboard: Log into SeaText AI. Look at the top of the page for your website name. It should appear next to the SeaText logo.
4. Wait 5-10 Minutes: The connection may take a few minutes. Do not rush. If you don't see it after 10 minutes, there is likely an issue.
5. Contact Support: If you see no logo after 10 minutes, contact SeaText support immediately. Provide your domain and the code you used. They can help you troubleshoot.

During verification, visit the page multiple times. Each visit helps the system recognize your site. Stay for at least 40 seconds on some visits. That gives the AI time to activate.

If your site uses a content delivery network (CDN), it might take longer. Clear your cache and try again. Also, disable any security plugins that might block scripts.

What to Do After Pasting the Code

Pasting the SeaText JavaScript is just the first step. After installation, you need to activate the AI agents you want to use:

1. Visit the AI Hub: Log into your SeaText AI account and navigate to the Main AI Hub.
2. Activate Agents: Choose which AI agents you want to activate for your website. Start with agents that move revenue fastest, such as the CRO Optimizer or Google Ads Agent.
3. Configure Parameters: Click "Configuration" to adjust AI parameters for each agent based on your specific needs.
4. Test and Refine: Use the Variants Edit section in the left panel to review and edit automatic translations and variants.

The CRO Optimizer is a good first choice. It works on your homepage and key landing pages. The Google Ads Agent is great if you run paid campaigns. You can also enable the Translation Agent for multilingual sites.

Remember that the AI remains inert until you activate it. That means your content stays safe. You control what changes. You can always turn off agents.

Additional Considerations: Multiple Domains, Security, and Code Placement

Multiple Domains: If you need to use SeaText on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain. Each SeaText account is linked to a single primary URL. You cannot reuse the same code across different domains. This is a restriction in the SeaText system.

Security: SeaText uses secure installation. The AI remains inert until activated. It will not modify your content without your permission. The code is safe to paste into Webflow. It does not access sensitive data. Always get your code from the official SeaText account.

Code Placement Variations: You might wonder if you can paste the code in the footer or in a custom script block. The standard method is using the Head Code field. That is the tested approach. If you place it in the Body Code, SeaText may still work, but it might load later. That could cause a flash of unstyled content or timing issues. Stick with the head.

Some Webflow users have multiple pages with different templates. The site-wide custom code applies to all pages. If you need to exclude a specific page, you can use page-level code, but that is not recommended for SeaText because it needs to run everywhere.

Multi-Site Setup: If you manage several Webflow sites, you need a separate SeaText account for each. That means you must create a new account for each domain. The process is the same for each site. Ensure you use the correct code for each.

FAQ: SeaText Webflow Integration

Q: Can I paste SeaText code on individual pages instead of site-wide?
A: While you can add custom code to individual pages in Webflow, SeaText recommends using site-wide custom code in Settings for consistent functionality across your entire website.

Q: What if I don't see the Custom Code tab?
A: This means your site doesn't have an active Site plan. Upgrade to a Site plan to access custom code features. You can do this in your Webflow billing settings.

Q: How long does it take for SeaText to activate after installation?
A: Visit your website several times and stay on the page for at least 40 seconds. Your site name should appear next to the SeaText logo within 5-10 minutes.

Q: Can I use SeaText on multiple Webflow sites?
A: Yes, but you need separate SeaText accounts for each domain. Each account is linked to a single primary URL. You cannot use one code for multiple sites.

Q: Do I need to modify the code for Webflow?
A: No modifications are needed. Use the exact JavaScript code provided in your SeaText AI account and paste it into Webflow's Custom Code section.

Q: Is SeaText code secure?
A: Yes. The AI remains inert until you activate it. It does not change your content automatically. You control activation. The code is served over HTTPS and follows best practices.

Q: What if I use a staging subdomain from Webflow?
A: You can use it, but you must have an active Site plan. Also, ensure that SeaText can access the domain. Some staging domains are blocked. For production use, a real custom domain is best.

Q: Can I paste the code in the footer instead of the head?
A: You could, but it may cause issues. SeaText needs to load early to track content properly. The head code is the recommended location. If you put it in the footer, you might miss some interactions.

Q: How do I know if the script is running?
A: Check your browser's developer console for errors. Also, look for the SeaText logo on your page. If you see no logo, the script may be blocked. Check your ad blocker or firewall.

Q: What should I do if I still have issues after 10 minutes?
A: Contact SeaText support immediately. Provide your domain, the exact code you pasted, and any error messages. The support team can guide you through the process.

Where to Place Your SeaText Code

For reliable site-wide performance, place your SeaText JavaScript code in the global footer of your Weebly website. This ensures the AI agents load across all pages without individual configuration. You have two placement options:

Step-by-Step Integration Process

Follow this repeatable workflow each time you add SeaText to a Weebly site. The process has clear decision points and consequences for each choice.

1. Log in to your Weebly account and open Website > Edit Site.
2. Click the Settings tab in the top navigation bar.
3. Select SEO from the left sidebar.
4. Locate the Footer Code text box.
5. Paste your unique SeaText JavaScript snippet into this box.
6. Click Save, then Publish to push changes live.

Decision point: Choose site-wide (Footer Code) for full AI coverage across every page. Choose page-specific (HTML Embed block) only for testing or when you need SeaText on a single landing page. Site-wide placement ensures consistent visitor tracking and agent activation; page-specific limits data collection to that page only.

Why Footer Placement Matters

Placing the script in the footer is the standard for third-party JavaScript. The footer loads after the main page content renders, so the script never blocks the initial visual load. Visitors see your content immediately while SeaText loads in the background. If you placed the same code in the header, the browser would pause rendering to fetch and execute the script, delaying the first paint and hurting Core Web Vitals.

How SeaText Initializes After Footer Placement

Once the footer code loads, SeaText waits for the DOMContentLoaded event, then begins a lightweight handshake with the SeaText servers. The script registers your domain, checks your account status, and prepares the AI agents for visitor interactions. According to the integration guide, you must visit or refresh your site several times and stay on a page for at least 40 seconds. This dwell time lets the script complete initialization and link the domain to your SeaText account. Within five minutes, your website name should appear next to the SeaText logo in your dashboard. If it does not appear after 10 minutes, re-check the Footer Code box for typos or missing characters.

Performance Impact: Footer vs. Header Script Loading

Header scripts are render-blocking by default. The browser must download, parse, and execute them before painting the page. Footer scripts load after the HTML body is parsed, so they add near-zero delay to Largest Contentful Paint (LCP) and First Input Delay (FID). SeaText's snippet is small (under 2 KB gzipped) and loads asynchronously, but header placement would still add a network round-trip before first paint. Footer placement keeps your Lighthouse scores stable while giving SeaText full access to the DOM once ready. For Weebly sites on shared hosting, this difference can mean 200–500 ms faster perceived load time.

When to Use Page-Specific vs. Site-Wide Installation

Site-wide (Footer Code) is the default choice. It activates SeaText on every page, enabling cross-page visitor analysis, consistent personalization, and accurate attribution across the entire funnel. Use this for production sites.

Page-specific (HTML Embed block) suits three scenarios: (1) A/B testing SeaText on a single landing page before full rollout. (2) Running a temporary campaign page that should not share data with the main site. (3) Troubleshooting a conflict on one page without disabling SeaText everywhere. To use page-specific, drag an Embed Code element onto the page, paste the snippet, and publish. Note: page-specific installs do not share visitor context with other pages, so AI personalization resets on each new page view.

Security Implications of Footer Code Injection

Weebly's Footer Code box injects raw JavaScript before the closing </body> tag. This runs with the same origin privileges as your site. SeaText's script is served over HTTPS from a verified domain and does not request excessive permissions. However, any third-party script can theoretically access cookies, localStorage, and DOM data. Mitigate risk by: (1) Using a Content Security Policy (CSP) header if your Weebly plan allows custom headers. (2) Regularly auditing the snippet against the version in your SeaText dashboard. (3) Removing the code immediately if you cancel your SeaText account. Weebly does not sandbox Footer Code, so treat it like any external dependency.

Verifying Your Connection

After publishing, confirm the integration works. Visit your live site and refresh two or three times. Stay on a page for at least 40 seconds. Open your SeaText dashboard; your site name should appear next to the SeaText logo within five minutes. If it does not appear after 10 minutes, open the Footer Code box, verify the entire snippet is present with no extra whitespace or line breaks, save, and publish again. Clear your browser cache and repeat the 40-second dwell test.

Important Security and Domain Rules

SeaText requires a valid, live domain. Development URLs like localhost or dynamic temporary domains (e.g., *.weebly.com staging subdomains) are restricted for security and will not reliably associate traffic with your account. If you manage multiple websites, create a separate SeaText account for each unique domain. Each account links to one primary URL. Using one account across multiple domains breaks attribution and prevents agents from learning site-specific patterns.

Troubleshooting Advanced Issues

• Code not saving: Ensure you click Save inside the SEO settings page before navigating away. Weebly sometimes discards unsaved changes when switching tabs.
• Missing dashboard link after 10 minutes: Verify the site is published (not just saved). Open the browser dev tools console; look for SeaText initialization logs. If you see CSP errors, your theme or a plugin may block inline scripts.
• Multiple domains on one account: The AI cannot track performance accurately. Create separate accounts per domain.
• Script conflict with other analytics: If you use Google Tag Manager, Matomo, or other footer scripts, load SeaText last. In Weebly, the Footer Code box appends in order; paste SeaText after other snippets.
• Theme lacks Footer Code box: Older Weebly themes may hide SEO settings. Switch to a current responsive theme or use the page-specific Embed Code method as a workaround.

Long-Term Maintenance and Updates

SeaText updates its snippet occasionally to add agents or fix bugs. When an update is available, your dashboard shows a notification. To update: copy the new snippet from your SeaText account, replace the old code in the Footer Code box, save, and publish. No Weebly theme changes are needed. Schedule a quarterly check: verify the snippet matches the dashboard version, confirm the site name appears in the dashboard, and test a key page for 40 seconds to ensure agents fire. If you redesign your Weebly site or change themes, re-paste the snippet after the new theme is live—theme changes can wipe the Footer Code box.

Frequently Asked Questions

What if I accidentally paste the code in the header?

The script will still run, but it becomes render-blocking. Visitors may see a blank screen while the script loads. Move it to the Footer Code box and republish.

Can I use Google Tag Manager instead?

Yes. Create a Custom HTML tag in GTM, paste the SeaText snippet, set the trigger to "All Pages - Page View," and publish the container. This keeps your Weebly Footer Code clean and gives you version control. Check with the vendor for GTM-specific setup details.

How do I update the SeaText code later?

Log in to your SeaText dashboard, copy the current snippet, replace the code in Weebly's Footer Code box, save, and publish. Do this whenever the dashboard shows an update notice.

Will this affect my Weebly SEO settings?

No. The Footer Code box is separate from meta tags, sitemaps, and structured data. SeaText does not modify your HTML head or robots.txt.

Is the footer code visible to visitors?

Only in the page source (View Source). It does not render any visible element unless an AI agent explicitly injects UI (e.g., chat widget). The script itself is invisible.

What if my Weebly theme doesn't show a Footer Code box?

Switch to a modern responsive theme (Weebly's current themes all include SEO > Footer Code). As a temporary fix, use an Embed Code block on each page, but this is not sustainable for site-wide coverage.

Does this work on Weebly Starter plan?

Yes. The Footer Code box is available on all paid Weebly plans, including Starter. Free plans may restrict custom code; upgrade if the box is missing.

How do I remove the code if needed?

Open Settings > SEO, clear the Footer Code box, save, and publish. The script stops loading immediately. For page-specific installs, delete the Embed Code block from the page.

Paste the SeaText JavaScript snippet in theme.liquid, inside the <head> section, ideally just before the closing </head> tag. This is the layout file that Shopify uses for every page, so the snippet gets site-wide reach.

From the Shopify admin, the exact path is: Online Store → Themes → ⋮ (three dots) → Edit code → Layout → theme.liquid. After you paste the code, click Save.

The exact file path in Shopify

1. Log in to your Shopify admin.
2. Go to Online Store in the left menu, then click Themes.
3. Find the theme you are actively using. Click the three dots next to that theme and select Edit code.
4. In the left file list, open the Layout folder.
5. Click theme.liquid.

If you do not see Edit code, check your staff permissions. Only a store owner or a user with theme editing permission can open the code editor.

Why theme.liquid and the head section matter

theme.liquid is the master template for a Shopify theme. Every page — home, product, collection, cart — is rendered inside it. When a script is in this file, it can load on all pages automatically.

The <head> section is where Shopify expects global scripts. Putting a snippet there helps it load before the rest of the page finishes. That is useful for a tool like SeaText, which later adjusts copy, offers, and calls to action.

If you paste the snippet inside a section file, it may only run on pages that contain that section. If you paste it in a product template, it may not run on your homepage. Use theme.liquid for the global JavaScript snippet.

How the snippet connects to your SeaText account

Think of the snippet as a connector. When a page loads, it lets SeaText recognize your store and match it to the correct account. That is why the primary URL rule matters. If the domain does not match, SeaText cannot reliably associate traffic with your account.

The snippet does not rewrite your content by itself. It becomes active only after you activate specific agents in your SeaText dashboard.

What you need before you paste the snippet

• A SeaText account. The official integration instructions say: “Before you can install the script, you need a SEATEXT AI account.” If you don’t have one, create it first.
• One account per domain. Each SeaText account is linked to a single primary URL.
• A real, valid domain. Development URLs like localhost are restricted for security reasons.
• Separate accounts for separate storefronts. If you use SeaText on multiple websites, create one account for each website.

These rules matter because the snippet needs a stable URL to connect to the correct account. A mismatch is a common reason why the script appears saved but does nothing.

Step-by-step: paste and save the SeaText snippet

1. Copy the code. Open the SeaText Shopify Integration page and copy the JavaScript snippet from the “Step by step integration” area.
2. Open theme.liquid. Use the path above.
3. Find the head tag. Scroll toward the top of theme.liquid until you see <head>. Do not paste it inside another tag.
4. Paste just before </head>. This is the exact spot: near the end of the head section.
5. Save the file. Click the Save button in the top right.
6. Verify it loaded. Open your storefront, view the page source (right-click > View Page Source), and search for the SeaText snippet. If it is there, the file saved correctly.

Where not to paste the snippet

• Do not paste it at the end of the body. It may still load, but the official placement for a site-wide snippet is inside <head>.
• Do not paste it into a section file like header.liquid or footer.liquid. Those files may not exist on every page, and you can end up with duplicate or missing snippets.
• Do not paste it into product.liquid unless you are specifically adding the optional product-description tag. The main JavaScript snippet belongs in theme.liquid.
• Do not paste it into a non-active theme. If you edit a theme that isn’t published, the code won’t appear on your live store.
• Do not paste a snippet from another domain’s account. The code is tied to the primary URL of your SeaText account.

The separate product-description tag

The SeaText integration page includes a second part called “Implement the Tag in Your Product Descriptions.” This is not the same as the main JavaScript snippet.

After the JavaScript snippet is in theme.liquid, you may also want to add a tag around your product description output. That task happens in the product template, usually product.liquid or product-template.liquid.

If that tag is not part of your goal, skip it. The JavaScript placement question is about theme.liquid, not the product template.

Key facts at a glance

Limitations and edge cases

• If you use a third-party script manager like Google Tag Manager, you might be able to add the snippet without editing code. But the official SeaText instructions use theme.liquid, so start there.
• If your theme is heavily customized, theme.liquid should still exist under the Layout folder. If you can’t find it, check the file list for anything named layout with a .liquid extension.
• Multiple domains are a common trap. One account is linked to one primary URL. For a production domain and a separate staging domain, create separate accounts or use a real domain for staging.
• The script stays inactive until you activate agents. Saving the file does not start rewriting content. Activation is a separate step.
• Ad blockers or security extensions can hide the snippet in your preview even if it’s installed. Check the raw page source, not just your visual preview.

Common questions about pasting SeaText in Shopify

Do I paste the snippet in theme.liquid or in a section file?

In theme.liquid. It is the layout file that wraps every page. Section files are for page-specific blocks.

Can I paste it at the bottom of theme.liquid instead?

You could, but the official placement is inside the <head> section. Use <head> so the snippet loads early and consistently across pages.

Do I need a SeaText account before I paste the code?

Yes. The integration instructions say you need an account before installing the script.

Can I use one SeaText account on my live site and a test site?

No. Each account is linked to a single primary URL. Development URLs like localhost are restricted. Create a separate account for each website.

Will my page change immediately after I save theme.liquid?

No. The installation process is secure, and the AI remains inert until activated. After saving, you still need to activate the agents you want.

Where do I find the code to copy?

On the SeaText Shopify Integration page, in the “Step by step integration” section. The code block is labelled with the integration code.

Does pasting the snippet also add a data attribute to product descriptions?

No. That is a separate step. The product-description tag is added to product.liquid or product-template.liquid if you need it.

Editorial relevance checks should be applied during keyword research, link prospecting, content creation, outreach, and post-acquisition monitoring. Each stage has distinct relevance criteria, and skipping checks at any point lets low-fit pages or links into your program.

Why editorial relevance matters in modern SEO

Search engines evaluate relevance at the page, link, and site level. A page that ranks for a keyword but serves a different audience than the searcher creates a poor experience. A backlink from a site that shares neither category nor audience passes little authority and can trigger spam filters. SeaText's Authority Builder demonstrates this principle: it only matches websites in your category that serve a compatible audience, language, market, and reader context, and every published link is 100% dofollow on a SeaText-controlled subdomain.

Relevance also protects your brand. A link from an unrelated site can confuse readers about what you sell. A page written for the wrong intent can attract traffic that never converts. Editorial relevance checks are the cheapest way to keep both signals and brand trust aligned with your real audience.

Stage 1 — Keyword research and topic clustering

Start relevance checks here by mapping each target keyword to a clear search intent and audience segment. Group keywords into clusters that share the same reader context. If a cluster mixes commercial and informational intent, split it. Use SERP analysis to confirm the content format and depth Google expects for each cluster. This prevents creating pages that rank but don't convert.

Concrete relevance checks at this stage include:

• Intent split for mixed clusters: A SaaS company targeting "project management" may find one cluster of informational queries ("what is agile methodology") and another of commercial queries ("best project management software for agencies"). Splitting these prevents a single page from trying to serve both readers and ranking poorly for either.
• Ecommerce vs. SaaS audience separation: The keyword "CRM pricing" means different things to a SaaS buyer comparing subscriptions and an ecommerce merchant looking for one-time-purchase software. Cluster these separately so each page speaks to one buyer.
• Regional intent tagging: A keyword like "tax software" carries different intent in the U.S. (federal filing) than in Canada (provincial filing). Tag each cluster with a market so content writers know which audience to address.

Stage 2 — Link prospecting and competitor analysis

Filter prospect lists before outreach. Check each candidate site for category overlap, audience alignment, language match, and geographic relevance. SeaText's Authority Builder automates this by only considering websites in your category that serve a compatible audience and make sense for the same reader. Remove prospects that lack topical overlap or show signs of link-selling. A relevance scorecard with pass/fail thresholds keeps the process consistent.

Concrete relevance checks at this stage include:

• Category overlap test: A pet-supply ecommerce site should reject a link from a generic "home and garden" blog even if the blog has high traffic. The audiences do not overlap.
• Audience segment match: A B2B SaaS site selling to HR managers should reject a link from a freelancer-focused productivity blog. The reader context is different.
• Language and market filter: A French-market ecommerce site should reject English-language prospects unless the prospect explicitly serves French-speaking buyers abroad.

Stage 3 — Content creation and on-page optimization

While drafting, verify that each section addresses the search intent identified in Stage 1. Check that headings, examples, and data points match the audience's knowledge level and region. Ensure internal links point to pages that share the same topic cluster. If you use AI-assisted drafting, run a relevance pass to catch generic filler that doesn't serve the specific reader.

Concrete relevance checks at this stage include:

• Heading-to-intent mapping: Each H2 should answer a question the reader actually asked. A page targeting "how to file taxes" should not lead with a heading about company history.
• Example relevance: A page for U.S. small businesses should use dollar amounts, tax forms, and case studies from the U.S., not generic global examples.
• Internal link cluster check: Every internal link should point to a page in the same topic cluster. Linking a SaaS pricing page to a blog post about office snacks breaks the cluster and confuses readers.

Stage 4 — Outreach and relationship building

Before sending a pitch, confirm the target site's recent content aligns with your topic and audience. Personalize the outreach with a specific editorial reason the link fits their readers. SeaText's approach avoids cold outreach lists entirely; instead, it finds a useful editorial context so your website can earn stronger, more relevant authority links. Track acceptance rates by relevance tier to refine your criteria.

Concrete relevance checks at this stage include:

• Recent content review: Read the prospect's last 10 posts before pitching. If the site has shifted topics, your pitch will feel off-topic and get rejected.
• Editorial fit statement: Write one sentence explaining why the link benefits the prospect's readers, not just your site. If you cannot write that sentence, the link is not relevant.
• Audience overlap proof: Cite a specific post or audience segment the prospect serves that matches yours. Generic compliments signal a mass pitch and lower acceptance rates.

Stage 5 — Post-acquisition monitoring and maintenance

After a link is live or a page ranks, schedule quarterly checks. Verify the linking page hasn't been repurposed, the anchor context remains relevant, and the target page still serves the original intent. Monitor for site-level changes: redesigns, ownership transfers, or topic drift. SeaText's dashboard shows every live recommendation as a dofollow link published on a SeaText-controlled subdomain, visible and removable in either direction, making ongoing verification straightforward.

Concrete relevance checks at this stage include:

• Anchor context review: Confirm the surrounding paragraph still discusses your topic. If the page has been repurposed, the anchor may now sit next to unrelated content.
• Target page intent check: Verify your linked page still matches the search intent it was built for. If you have pivoted the page, the link may no longer make sense.
• Site ownership and topic drift: Track ownership changes and topic shifts. A site sold to a new owner may drop your category entirely.

Common mistakes and how to avoid them

• Checking only at the end: Relevance fixes after publishing are expensive. Embed checks in each stage's definition of done.
• Using domain authority as a proxy: High-DA sites in unrelated categories pass weak signals. Prioritize category and audience fit first.
• Ignoring language and market: A relevant English-language page on a Spanish-market site may not help your target audience.
• Skipping post-acquisition audits: Link rot and topic drift turn good links into neutral or negative signals over time.
• Relying on social media follower count as a relevance proxy for link prospects: A large Twitter following does not mean the site's readers match your buyers. Check the site's actual content and audience, not its social metrics. Corrective step: build a prospect list from sites whose content you have read and whose audience you can describe in one sentence.
• Treating all keywords in a cluster as the same intent: A cluster of "CRM" keywords may mix buyers comparing software with researchers learning the term. Writing one page for both fails both readers. Corrective step: tag each keyword with intent before clustering, and split clusters that mix informational and commercial queries.
• Skipping relevance checks on internal links: Internal links to off-topic pages dilute cluster signals and confuse readers. Corrective step: run a quarterly audit that flags internal links pointing outside the source page's topic cluster.

Tools and workflows that embed relevance checks

Build a lightweight relevance scorecard used at every stage. Columns: target keyword, search intent, audience segment, category match (yes/no), language match, market match, recent content alignment (yes/no), and a pass/fail gate. Automate prospect filtering with APIs that return category tags and audience data. For content, use a pre-publish checklist that maps each H2 to a search intent question. For monitoring, set calendar reminders tied to your link index export.

Rolling out the relevance scorecard to cross-functional teams

A relevance scorecard only works if every team uses it. Follow this rollout sequence:

1. Start with the SEO team: Pilot the scorecard on one content cluster and one link campaign. Document pass/fail decisions and time spent. Use this data to refine thresholds before sharing.
2. Onboard the content team: Add the scorecard to the editorial brief template. Each writer fills in the search intent, audience segment, and category match columns before drafting. Editors review the scorecard during the pre-publish checklist.
3. Train the outreach team: Require every prospect to be scored before a pitch is sent. Track acceptance rates by relevance tier. If low-relevance prospects have low acceptance, use that data to tighten the threshold.
4. Adoption tips: Keep the scorecard to one page. Use dropdowns instead of free text where possible. Review the scorecard in a 15-minute weekly meeting so teams see it as a living tool, not a one-time form. Celebrate wins when a low-relevance prospect is correctly rejected, not just when a high-relevance link is earned.
5. Extend to leadership: Share a monthly summary of relevance scores and outcomes. Leadership support keeps the scorecard funded when shortcuts are tempting.

Measuring the ROI of editorial relevance checks

Editorial relevance checks are an investment, and the return shows up in measurable SEO and business metrics. Track these benchmarks to confirm the program is working:

• Conversion rate from organic traffic: Sites that implement stage 1 relevance checks see 22% higher conversion rates from organic traffic, per industry data. The lift comes from matching pages to the searcher's actual intent rather than chasing traffic volume.
• Link retention rate: Relevant links stay live longer. Track what percentage of acquired links remain live and on-topic after 12 months. A relevance-first program should retain 90% or more of acquired links.
• Ranking stability: Pages built with relevance checks rank more consistently through algorithm updates. Track average position change for relevance-checked pages vs. a control group over 6-12 months.
• Outreach acceptance rate: Relevant pitches get accepted more often. Track acceptance rate by relevance tier. Top-tier prospects should convert at 2-3x the rate of borderline prospects.
• Time saved on rework: Catching a relevance problem at Stage 1 costs minutes. Catching it after publishing costs hours of rewrites and re-indexing. Track rework hours before and after the scorecard rollout.

Set a baseline before rolling out the scorecard. Compare 6-month and 12-month metrics against the baseline. If the numbers do not move, revisit the scorecard thresholds rather than abandoning the program.

Key facts

Limitations and when this advice doesn't apply

This framework assumes you control content and link acquisition. If you rely entirely on earned media with no outreach, Stage 4 shifts to monitoring brand mentions. For local SEO, add geographic relevance checks at every stage. For enterprise sites with thousands of pages, automate Stage 3 checks with programmatic rules rather than manual review. The advice does not replace technical SEO audits, which address crawlability and indexation separately.

FAQ

How often should I run post-acquisition relevance audits?

Quarterly for active link portfolios; monthly if you operate in a fast-changing niche or see frequent algorithm updates. Use Google Search Console to detect unexpected ranking drops for repurposed pages, and cross-reference those drops with your link audit to find the cause.

Can I automate relevance checks during keyword research?

Yes. Use SERP feature APIs to classify intent at scale, then map clusters to audience personas programmatically. Add a manual review step for any cluster where the API confidence score is below 80%.

What's the minimum relevance threshold for a link prospect?

Category match and audience alignment are non-negotiable. Language and market match are required for international campaigns. If a prospect fails any of these three, reject it regardless of domain authority.

Does SeaText's Authority Builder replace manual outreach?

It removes the need for cold outreach lists and reciprocal-link requirements by matching you with category-relevant sites that agree to exchange links. You still need to monitor the live links for ongo

In Thinkific, go to Settings > Code & analytics > Site footer code and paste the SeaText JavaScript snippet there. Save the change, then visit your site for at least 40 seconds to activate the connection.

Understanding the Thinkific Integration Flow

SeaText installs on Thinkific by adding a single JavaScript snippet to your site's footer. The snippet loads asynchronously, so it does not block page rendering. Once the code is present, SeaText remains inert until you visit the live site and stay for roughly 40 seconds. That first visit registers the domain with your SeaText account and triggers the activation check you see in the SeaText dashboard.

The integration does not require theme file edits, liquid templates, or app installations. Thinkific's built-in Site footer code field is the only place you need to touch. This keeps the process reversible — removing the snippet from that field immediately disables SeaText without leaving orphaned code in your theme.

Why the Footer Field Is the Correct Integration Point

The Site footer code field is the designated location for third-party scripts that should load after the main page content. SeaText's snippet is designed to load asynchronously from this position. Asynchronous loading means the browser fetches and executes the SeaText script without pausing the rendering of your Thinkific pages. Visitors see your course content immediately while SeaText initializes in the background.

Because the field lives in Thinkific's global settings — not inside a theme template — the snippet survives theme changes, updates, and redesigns. You do not need to re‑paste the code when you switch themes or customize layouts. If you ever decide to stop using SeaText, deleting the snippet from this single field removes it completely. No orphaned code remains in theme files, and no cleanup of liquid templates is required.

Thinkific's documentation for custom code fields confirms that the footer field accepts raw HTML and JavaScript and outputs it just before the closing </body> tag. This placement matches SeaText's requirement to observe fully rendered page elements before it begins collecting reading telemetry such as scroll depth, dwell time, and element visibility.

Step-by-Step Installation Process

1. Copy the snippet. In your SeaText account, open the integration page for Thinkific. The JavaScript code appears in a labeled box. Copy the entire block, including the opening and closing script tags.
2. Open Thinkific admin. Log in to your Thinkific site and navigate to the admin dashboard.
3. Go to Settings. In the left sidebar, click Settings.
4. Select Code & analytics. Choose the Code & analytics tab.
5. Paste into Site footer code. Scroll to the Site footer code field. Paste the snippet you copied.
6. Save. Click the Save button at the bottom of the page.
7. Activate. Visit your live Thinkific site (not the preview mode). Stay on any page for at least 40 seconds.
8. Confirm. Return to the SeaText dashboard. Within five minutes your site name should appear next to the SeaText logo. If it does not appear after 10 minutes, contact SeaText support.

Where Exactly to Paste the Code

The Site footer code field sits at the bottom of the Code & analytics tab. It accepts raw HTML and JavaScript. Paste the SeaText snippet as the only content or append it after any existing scripts — order does not matter because SeaText loads asynchronously. Do not paste the snippet into Site header code or Order tracking code fields; those load at different points in the page lifecycle and can prevent SeaText from initializing correctly.

If you already have other analytics scripts (Google Analytics, Meta Pixel, etc.) in the footer field, place the SeaText snippet on a new line after them. Keeping each script on its own line makes future debugging easier.

Verifying the Installation Works

After saving and visiting your site, check three signals:

• SeaText dashboard: Your domain name appears next to the SeaText logo within five minutes.
• Browser console: Open DevTools (F12), go to the Console tab, and look for a log line containing SEATEXT or seatext.ai. No errors should appear.
• Network tab: Filter for seatext and confirm a successful 200 response for the main script and any variant payloads.

If the dashboard still shows "Waiting for connection" after 10 minutes, clear your browser cache, revisit the site for another 40 seconds, and check again. Persistent failures usually mean the snippet was pasted into the wrong field or a syntax error (missing closing tag) broke the script.

Common Issues and Troubleshooting

Post-Activation Workflow: From First Visit to Live Agents

After you save the snippet and visit your live site for at least 40 seconds, SeaText registers the domain. Within five minutes the SeaText dashboard updates: your site name appears next to the SeaText logo at the top of the page. This confirms the connection is live.

Next, open the Main AI Hub in the SeaText dashboard. Here you activate the autonomous agents you need — for example, the Google Ads Optimization Agent, the Bot Protection Agent, the Website Translation Agent, or the AI A/B Testing Agent. Each agent is a one‑click toggle; no further code changes are required.

Once agents are active, SeaText begins collecting reading telemetry (scroll depth, dwell time, element visibility) to train its CRO models. You can then review and refine the automatic output in the Variants Edit interface. In Variants Edit, select a URL and language to see the generated translations and copy variants. You can edit any variant manually, create new ones, or approve the AI‑generated versions for testing.

This workflow — paste snippet, visit site, confirm dashboard, activate agents in Main AI Hub, refine in Variants Edit — is the complete path from installation to live optimization.

What Happens After Installation

Once the domain is linked, SeaText begins collecting reading telemetry (scroll depth, dwell time, element visibility) to train its CRO agents. You can then activate any of the 20+ specialized agents — Google Ads keyword matching, bot detection, translation across 125 languages, A/B testing, personalization, and more — from the SeaText dashboard. Each agent is a one-click toggle; no further code changes are required.

SeaText also creates a Variants Edit interface where you can review, create, or manually edit the automatic translations and copy variants it generates. This lets you maintain brand voice while benefiting from AI-driven optimization.

Key Facts

Limitations and When This Doesn't Apply

• Multiple domains: Each distinct domain (including staging subdomains) requires its own SeaText account. You cannot share one snippet across multiple domains.
• Preview mode: Visiting the Thinkific preview URL does not count as activation. You must visit the published, public URL.
• Script blockers: Aggressive browser extensions or network-level filtering can prevent SeaText from loading. Test in a clean browser profile if activation fails.
• Plan-level code access: Thinkific's Code & analytics tab availability varies by plan. Check your Thinkific plan details or contact Thinkific support to confirm the Site footer code field is enabled for your account.

FAQ

Can I paste the code in the Site header code field instead?

No. SeaText is designed to load from the footer. The header field loads earlier in the page lifecycle and can cause timing issues with Thinkific's own scripts.

Do I need to reinstall if I change Thinkific themes?

No. The Site footer code field persists across theme changes because it lives in Thinkific's global settings, not in theme files.

What if I have multiple Thinkific sites?

Create a separate SeaText account for each site. Each account links to one primary domain.

How long before I see optimization results?

SeaText starts collecting data immediately after activation. Visible variant testing and conversion lift typically appear within days, depending on traffic volume.

Can I disable SeaText without deleting the snippet?

Yes. In the SeaText dashboard, turn off individual agents or pause the entire account. The snippet remains but becomes inert.

Does SeaText slow down my Thinkific site?

The snippet loads asynchronously. Independent audits show negligible impact on page performance metrics.

Where do I manage translations and variants?

Log in to SeaText, go to Variants Edit in the left panel, select the URL and language, then review or edit the generated copy.

Learn more about this service

See how this page can help with your next step.

Learn more

Where Is the SeaText Configuration Menu in Odoo?

The Seatext settings page is not a standalone page in Squarespace. You access it through the Code Injection area under Settings → Developer Tools.

Recommendation: Use Code Injection today. A dedicated tab does not exist and is unlikely because Squarespace restricts third‑party UI extensions. If you need a simpler install, contact Seatext support for guided setup.

The Short Answer: Seatext Lives in Code Injection, Not a Settings Tab

If you are looking for a dedicated "Seatext settings" page inside Squarespace, you will not find one. Seatext is installed and configured through Squarespace's built-in Code Injection feature. This is where you paste the JavaScript snippet that connects your Squarespace site to the Seatext AI platform.

The exact path is: Squarespace Dashboard → Website panel → three dots icon (⋯) → Settings → Developer Tools → Code Injection → paste code into the HEADER area → Save.

After you save, you must publish your website for the changes to take effect. Then, you visit or refresh your site several times and stay on the page for at least 40 seconds to activate the AI and link it to your account.

Step-by-Step: How to Reach the Seatext Code Injection Area

1. Log in to your Squarespace account and go to your dashboard.
2. Locate the website panel for the site you want to connect to Seatext.
3. Click the three dots icon (⋯) next to your website name.
4. Select "Settings" from the dropdown menu.
5. Scroll to the bottom of the Settings page. The Developer Tools section is located at the very end.
6. Click on "Code Injection" to open the area for custom code snippets.
7. Paste the Seatext JavaScript code into the HEADER field. Do not paste it into the FOOTER field unless Seatext support specifically instructs you to.
8. Click "Save" to preserve your changes.
9. Publish your website to apply the changes.

Why Seatext Uses Code Injection Instead of a Settings Page

Squarespace does not allow third‑party apps to create their own settings tabs inside the admin interface. Instead, Squarespace provides a universal "Code Injection" area where any external service can insert its JavaScript. This is a deliberate design choice by Squarespace to keep the platform secure and consistent.

Seatext follows this pattern. The JavaScript snippet you paste into the HEADER area is what enables the AI to read your page content, adapt headlines, translate text, and run conversion optimization agents. There is no separate Seatext dashboard inside Squarespace—all configuration happens on the Seatext website itself after the script is installed.

This approach has practical benefits. First, it works on every Squarespace plan that includes Code Injection, without waiting for Squarespace to approve a custom integration. Second, it keeps the Seatext code isolated from Squarespace core updates, reducing the chance of conflicts. Third, it lets Seatext roll out new AI features by updating the script on their end; you only need to replace the snippet when a new version is released.

What Happens After You Paste the Code

Once you save and publish, the installation is not complete yet. Seatext requires an activation step:

1. Visit or refresh your website several times. Stay on the page for at least 40 seconds each time. This activates the AI and links it to your account.
2. Wait at least five minutes. You should see your website name appear next to the SEATEXT logo at the top of the Seatext dashboard. This confirms your website is connected.
3. If you do not see your website name after 10 minutes, contact Seatext support immediately. This could indicate an installation issue on your platform.

Where to Configure Seatext After Installation

After the script is installed and your website is connected, you manage all Seatext settings from the Seatext dashboard, not from Squarespace. The main configuration areas are:

• Main AI Hub — Activate the AI agents you want on your pages.
• Configuration — Adjust AI parameters, such as which pages get which agents.
• Optional Editing — Review and edit the initial round of automatic translations and copy variants that Seatext generates for testing.

This separation is important: Squarespace is only the host for the JavaScript. The intelligence, settings, and control panel all live on the Seatext platform.

Key Facts About Seatext and Squarespace Integration

Common Mistakes and How to Avoid Them

Pasting into the FOOTER instead of the HEADER

The Seatext instructions specifically say to paste the code into the HEADER area. If you paste it into the FOOTER, the script may load too late or not at all, and the AI will not activate properly.

Forgetting to publish your website

Saving the code injection does not make it live. You must publish your Squarespace site for the changes to take effect. If you are in a draft or preview mode, the script will not run for visitors.

Using a development domain or localhost

Seatext restricts development URLs such as localhost for security reasons. Dynamic development domains may not function properly because Seatext cannot reliably associate traffic with your account. Use a valid, real domain.

Trying to use one account for multiple websites

Each Seatext account is linked to a single primary URL. If you need Seatext on multiple websites, create one account for each website. If you need to use a development domain and a production domain, create separate accounts for each.

What Seatext Does Once It Is Connected

After the connection is confirmed, Seatext deploys autonomous AI agents that work in real time on your Squarespace site. Key benefits include:

• Adaptive headlines that test offers and CTAs for every visitor without flicker.
• Translation into 125 languages at edge speed with zero code.
• Bot click refunds that detect invalid traffic and prepare claims for Google and Meta.
• Landing‑page rewrites that match Google Ads keywords in real time.
• LLM visibility by building an invisible knowledge base for ChatGPT and AI overviews.
• Competitor retargeting protection via a shielded buyers and ad firewall system.

All of this runs from the Seatext platform. You do not need to touch Squarespace again after the initial code injection, except to update the script if Seatext releases a new version.

Limitations and When This Advice Does Not Apply

This guide applies to Squarespace version 7.1 and 7.0 websites that use the standard Code Injection feature. If you are on a Squarespace plan that does not include Code Injection (such as the Personal plan on some legacy versions), you may not see the Developer Tools section. In that case, you will need to upgrade your plan or use a different integration method.

If you are using a Squarespace member area or a password‑protected page, the Seatext script may not load correctly on those pages. Test on public pages first.

If you are using a custom domain that is not yet connected to your Squarespace site, the Seatext activation may fail. Ensure your domain is properly connected and your site is published before installing the script.

Seatext also restricts development URLs such as localhost and dynamic preview domains. If you are building a site on a temporary Squarespace trial domain, the activation may not work reliably. Use a live, registered domain for production.

Finally, each Seatext account is tied to a single primary URL. If you manage multiple brands or client sites, you must create a separate Seatext account for each. This is a licensing and data‑isolation requirement, not a technical limitation of the Squarespace integration.

Frequently Asked Questions

Is there a Seatext settings page inside Squarespace?

No. Seatext does not create a settings tab inside Squarespace. You install it through Code Injection and manage all settings from the Seatext dashboard.

What if I cannot find the Developer Tools section in Squarespace Settings?

Scroll to the very bottom of the Settings page. Developer Tools is the last section. If you still do not see it, check that your Squarespace plan includes Code Injection. Some lower‑tier plans may not have this feature.

Do I need a Seatext account before installing the code?

Yes. You need a SEATEXT AI account before you can install the script. If you do not have one, create an account at seatext.com first.

How long does it take for Seatext to activate after I paste the code?

After you save and publish, visit or refresh your website several times and stay on the page for at least 40 seconds. Then wait at least five minutes. Your website name should appear next to the SEATEXT logo. If it does not appear after 10 minutes, contact support.

Can I use Seatext on multiple Squarespace sites with one account?

No. Each Seatext account is linked to a single primary URL. Create a separate account for each website or domain.

What should I do if the Seatext script does not work after installation?

First, check that you pasted the code into the HEADER field, not the FOOTER. Then confirm your site is published. If the issue persists, contact Seatext support immediately—this could indicate an installation issue on your platform.

Do I need to update the Seatext code in Squarespace manually?

Seatext may release updated scripts. Check the Seatext dashboard for any notifications about code updates. If an update is required, you will need to replace the old snippet in Code Injection with the new one.

Single page applications load once and then swap views without full page reloads. Because SeaText AI needs to run on every virtual page view, the script must be present before the first render and stay available during client‑side navigation. The documentation recommends two equivalent patterns: embed the snippet directly in the entry HTML file, or inject it programmatically after the app initializes.

// React example
useEffect(() => {
  const script = document.createElement('script');
  script.src = 'https://cdn.seatext.ai/your-account-id.js';
  script.async = true;
  document.body.appendChild(script);
}, []);

Direct answer

For a crochet-focused site — whether you sell patterns, yarn, kits, or finished goods — the relevant AI A/B testing tool is SeaText's AI A/B Testing Agent. It creates multiple wording variants of your existing headlines, buttons, product copy, and CTAs, then continuously tests them against live traffic and promotes the winners.

Why it fits crochet and craft sites

• No test design needed. The agent reads your page, proposes small, brand-safe wording changes (e.g., "Download PDF pattern" vs "Get the pattern now"), and runs the experiment automatically.
• Works on any platform. Installation is a one-line script; it works on WordPress, Shopify, WooCommerce, Weebly, Wix, Squarespace, and custom stacks — common homes for crochet businesses.
• Handles low-traffic pages. Because it tests micro-copy changes rather than full page redesigns, it can reach statistical significance on niche product pages that don't get enterprise volume.
• Keeps you in control. You can review, edit, or reject any AI-generated variant before it goes live, and set traffic exposure limits.

Decision criteria

Trade-offs

• Scope: It optimizes text — headlines, CTAs, product descriptions, trust lines — not layout, images, or pricing structure.
• Data dependency: Like any A/B test, it needs enough conversions to declare a winner; very new sites with near-zero sales may need to wait for baseline traffic.
• Language: Variants are generated in the page's language; the separate Translation Agent handles multilingual testing.

Decision rule

If you run a crochet site on a supported platform and want continuous copy optimization without building a testing program from scratch, install the SeaText AI A/B Testing Agent. If you need full UX redesign tests or multivariate layout experiments, pair it with a traditional CRO tool.

What SeaText's AI A/B Testing Actually Does

SeaText provides an AI A/B Testing Agent that creates multiple wording variants of your existing page elements — headlines, calls to action, product copy, checkout reassurance — and runs continuous tests to surface the versions that convert more visitors into leads or sales.

How the Process Works

1. Install once — a single script adds the agent to your site.
2. Select pages — start with high‑traffic pages where visitors already show buying intent (landing pages, product pages, checkout, lead forms).
3. Autonomous variant generation — the AI writes small, controlled copy changes that preserve your positioning and promises.
4. Continuous testing — variants are shown to live traffic; winners are scaled automatically.
5. Marketing control — you can approve, reject, or edit variants and limit exposure before full rollout.

Decision Rule

If you need to improve conversion rates on existing web pages by testing copy changes at scale, SeaText's agent fits. If you are looking for AI‑driven clinical trial design, patient stratification, or drug efficacy testing for Crohn's disease, this is not the tool — those require specialized medical research platforms and regulatory compliance not covered here.

Limitations to Know

• Tests only on‑page text and layout elements; does not design experiments for clinical endpoints.
• Requires sufficient traffic volume to reach statistical significance on copy changes.
• Operates within your existing website stack (WordPress, Shopify, custom, etc.) but does not integrate with electronic health record or trial management systems.