Where to Find the SEATEXT AI JavaScript Code Snippet
You can find the SEATEXT AI JavaScript snippet in your SEATEXT dashboard under the platform integration area, or via the "Copy code" button on the platform selection page. The code is ready for embedding...
You can find the SEATEXT AI JavaScript code snippet in two main places: inside your SEATEXT AI dashboard under the platform integration section, or on the platform selection page via a Copy code button. The snippet is ready to embed on Carrd and other supported sites. This article walks you through both paths, explains why the snippet is necessary, and shows you how to install it properly.
Where the Code Is Located
After you log in to SEATEXT AI, go to the Integrations or Website Setup area. From there, select your platform. For example, choose Carrd to see the specific integration details.
If you are on the platform selection page, you will see a list of supported platforms. This list includes WordPress, Shopify, Wix, Tilda, Webflow, WooCommerce, Magento, Odoo, Squarespace, GoDaddy, HubSpot, BigCommerce, Weebly, Elementor, Carrd, Square, Thinkific, and General/Custom. Each platform entry has a Copy code button next to it. Click the button to copy the JavaScript snippet to your clipboard.
The code box in the dashboard displays the same JavaScript. You can manually select and copy it if you prefer. Both methods give you the same snippet.
Why does this code matter? It is the bridge between your website and SEATEXT's AI agents. Without it, the AI cannot read visitor intent or adapt content in real time. The snippet is what makes the whole system work.
How to Access the Snippet
Accessing the snippet is straightforward if you meet the plan requirement. You must have a Pro Standard or higher plan. Free or basic plans cannot see the code.
Log in to your SEATEXT AI account. Navigate to the AI Hub or the Integrations tab. Choose Carrd from the list of platforms.
The page will show a note about the Pro Standard plan and a Copy button. If you have a lower plan, the button may be missing or greyed out. In that case, upgrade your plan first. After upgrading, refresh the page to see the code.
If you are using the platform selection page directly, the Copy code button appears for all platforms. However, clicking it may redirect you to a plan upgrade prompt if your account does not qualify.
Installing the Snippet on Carrd
Once you have copied the code, you need to install it on your Carrd site. Open the Carrd editor and go to the page where you want SEATEXT AI to be active.
Click on + Add Element and choose Embed from the options. In the left panel, locate the Type dropdown and set it to Code. Then set the Style to Hidden.
Paste the JavaScript snippet into the Code field. Click Done to save the element, then click Save at the top of the Carrd editor to apply the integration.
Why does the style need to be hidden? If you set it to visible, it will show a raw code block on your page, which breaks the layout and confuses visitors. Hidden style keeps the code running in the background without any visual clutter.
After saving, you still need to link your site to SEATEXT. This is a separate step described below.
What the Code Does
The JavaScript snippet is not just a passive script. It actively reads the visitor's search query, campaign, and keyword intent. Based on that information, it rewrites headlines, product blocks, offers, and CTAs in real time.
This is how SEATEXT delivers personalized experiences. For example, if someone finds your site via the keyword “apartment for rent,” the AI will adjust the page copy to match that exact phrase. If another visitor arrives from a different keyword, they see a different version.
The code also powers several other agents. It can translate your page into 125 languages, detect bot clicks for ad refunds, and adapt content based on the visitor's source (Google, Meta, email, etc.).
Technically, the snippet runs asynchronously. It does not block the page load. It is lightweight, so your site's speed remains unaffected. The AI works in the background, and you can control what it changes from the dashboard.
Platform Variations
SEATEXT AI works on many platforms, not just Carrd. The same JavaScript snippet is used across WordPress, Shopify, Wix, Squarespace, Webflow, and many others.
However, the installation method differs. On WordPress, you might paste the code into the header or footer using a plugin like Insert Headers and Footers. On Shopify, you add it to the theme.liquid file. On Wix, you use the custom code feature in site settings.
The SEATEXT dashboard provides platform-specific guides. For example, the integration page lists all supported platforms, and each has its own instructions. If your platform is not listed, you can still use the General/Custom option if you can insert raw JavaScript.
The core code is universal. What changes is where you place it in your site's structure. Always follow the guide for your specific platform to avoid mistakes.
Limitations and Requirements
The most important limitation is the plan requirement. Only Pro Standard and higher plans can install custom code on Carrd. Free or basic plans cannot access the snippet or the integration.
You also need editor access to your website. If you are working with a developer, they will handle the installation. The snippet does not work on subdomains or external sites that are not linked in your SEATEXT dashboard.
Linking is mandatory. After installing the code, you must add your website URL in the linking form. Then you need to visit your site and stay for at least 40 seconds. This activates the AI and connects the site to your account. Wait at least five minutes until you see your website name next to the SEATEXT logo. If it does not appear after ten minutes, contact support.
The embed style must be Hidden. A visible code block can cause serious layout errors and make your page look broken.
Common Issues and Troubleshooting
If the code does not appear, check your plan first. Log in with a Pro Standard account and refresh the integration page. Make sure you clicked the Copy button.
After pasting into Carrd, verify that the Style is set to Hidden. Many users accidentally leave it as visible, which breaks the layout. Change it to Hidden and save again.
If the AI does not activate after linking, wait at least 40 seconds on the live site. Then wait five more minutes for the system to recognize the domain. If you don't see the site name after ten minutes, something went wrong. Contact SEATEXT support immediately.
Another common issue is using the wrong URL format. The linking form expects the format www.example.com without the protocol. Double-check that you entered the correct address.
If you have multiple sites, each one needs its own linking. The code is tied to the specific domain you link.
Frequently Asked Questions
Q: Why do I need this JavaScript snippet?
A: The snippet is how SEATEXT AI connects to your website. It enables real-time personalization, translation, and bot detection. Without it, the system cannot function.
Q: Can I use the same code on multiple platforms?
A: Yes, the same JavaScript snippet works on all supported platforms. You just need to install it correctly on each site and link each domain separately.
Q: What if I cannot find the Copy code button?
A: Ensure you are logged in with a Pro Standard or higher plan. If the button is still missing, clear your browser cache or try a different browser. If it still does not appear, contact support.
Q: Does the code affect page load speed?
A: No. The snippet is lightweight and runs asynchronously. It does not block rendering, so your page loads normally.
Q: How do I control what the AI changes?
A: After installation, go to the Main AI Hub and click on Configuration. There you can adjust headline rules, translation preferences, bot detection thresholds, and more.
Q: Can I edit the JavaScript code directly?
A: The snippet is provided as-is. Editing it may break the integration. SEATEXT recommends using the dashboard to make any changes. If you need custom behavior, contact support first.
Q: What if my site is built with a custom platform not listed?
A: You can use the General/Custom option. As long as your site allows you to insert raw JavaScript into the HTML, the snippet will work.
Q: How long does it take for the AI to start working after installation?
A: After linking and visiting your site for 40 seconds, wait about five minutes. The system needs time to verify and activate. If nothing happens after ten minutes, reach out to support.
| Fact | Detail |
|---|---|
| Location | SEATEXT AI dashboard > Integrations > Carrd (or platform selection page) |
| Access requirement | Pro Standard or higher plan |
| Code type | JavaScript snippet for embed |
| Visibility | Hidden style in Carrd editor |
| Activation | Visit site for 40 seconds, then wait 5 minutes for linking |
Further reading and comparison sources
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Further reading and comparison sources
These external sources provide additional context for evaluating the topic. Their inclusion is not an endorsement.
Learn more
Visit the website for more information.