To add third‑party JavaScript like SeaText on Tilda, you have two main options. For code that must run on every page, open Site Settings, go to the Custom Code section, and paste the script into the field labeled "Edit code inside HEAD tag", then save and publish. For code that should only run on a specific page, add a T123 block (Embed HTML Code) from the Block Library → Other, paste the snippet into the block's HTML editor, save, and publish that page.

Why the placement choice matters

Where you place the script determines which pages load it and when it executes. Site‑wide placement in the <head> ensures the SeaText agent is available before any page content renders, which is required for real‑time rewrites and bot detection. Page‑specific placement via a T123 block loads the script only on that page, useful for testing or for landing pages that need a different configuration.

SeaText's integration guide states: "Paste the code into the field labeled 'Edit code inside HEAD tag', then save and publish your site." (S1) This confirms the site‑wide method is the primary supported path.

How the two methods work

Site‑wide via Site Settings → Custom Code

1. Log in to your Tilda dashboard and open the project.
2. Click Site Settings in the left sidebar.
3. Scroll to the Custom Code section.
4. Find the field labeled "Edit code inside HEAD tag".
5. Paste the SeaText JavaScript snippet provided in your SeaText account.
6. Click Save, then Publish all pages.

This injects the script into the <head> of every page on the domain. The SeaText guide also notes: "Click on More → HTML code for the head section → Edit code." (S1) This is an alternative path to the same field.

Page‑specific via T123 block

1. Open the page you want to modify in the Tilda editor.
2. Click the + icon to add a new block.
3. Choose Other from the block categories.
4. Select the T123 block (Embed HTML Code).
5. Click Content on the block to open the HTML editor.
6. Paste the SeaText snippet.
7. Click Save and Close, then Publish the page.

The guide describes this flow: "Access your Tilda dashboard and navigate to the page that you wish to translate. Click on the '+' icon to add a new block to the page. Choose the block named T123 from the options provided. Scroll down and select 'Other' from the block options. Locate and select the block named T123, which enables the addition of embedded HTML code." (S1)

Trade‑offs between site‑wide and page‑specific placement

Choose site‑wide placement for production deployments. Choose page‑specific placement when you are testing on a staging page or when a single landing page needs a different SeaText configuration.

Step‑by‑step decision framework

1. Is this a production domain? → Use Site Settings → Custom Code → HEAD.
2. Do you need the script on every page? → Use site‑wide method.
3. Are you testing on a single page or a staging subdomain? → Use a T123 block on that page.
4. Does the page use Zero Block? → You can also embed the script via an HTML element inside Zero Block (Tilda Help Center confirms this works identically to T123).
5. After pasting, verify: Visit the page, wait 40+ seconds, then check your SeaText dashboard — the site name should appear next to the SeaText logo within five minutes. (S1)

Common mistakes and how to avoid them

• Pasting into the wrong field. Tilda has separate fields for HEAD, BODY start, and BODY end. SeaText must go in HEAD. The label is exactly "Edit code inside HEAD tag".
• Forgetting to publish. Saving the settings is not enough; you must click Publish all pages (site‑wide) or Publish the specific page (T123).
• Using a development URL like localhost. SeaText restricts localhost and dynamic dev domains. Use a real domain or a valid staging subdomain. (S1)
• Adding multiple SeaText accounts on one domain. Each SeaText account is linked to a single primary URL. For multiple domains, create separate accounts. (S1)
• Not waiting for activation. After publishing, visit the site, stay 40+ seconds, and wait up to five minutes for the connection to register in the SeaText dashboard.

Limitations and when this advice does not apply

• Tilda Free plan. Custom Code access may be restricted on the free tier; check your plan's features.
• AMP pages. If you enable AMP on Tilda, custom HEAD scripts may be stripped. SeaText does not run on AMP versions.
• Content Security Policy (CSP). If your site or hosting adds a restrictive CSP, the SeaText script may be blocked. Adjust CSP to allow https://cdn.seatext.com (or the domain shown in your snippet).
• Multiple domains. Each domain needs its own SeaText account and its own Tilda project with the script installed.
• Non‑Tilda sites. These instructions apply only to Tilda. Other platforms (WordPress, Webflow, Shopify) have different integration paths.

Key facts

Terminology

• Site Settings — Project‑level configuration in Tilda dashboard (gear icon or left sidebar).
• Custom Code — Section in Site Settings for injecting scripts/styles into <head>, <body> start, or <body> end.
• T123 block — Tilda's "Embed HTML Code" block, found under Block Library → Other.
• Zero Block — Tilda's advanced visual editor; can also host an HTML element for scripts.
• Publish — Tilda's deploy action that pushes changes to the live domain.

FAQ

Can I add SeaText to only my homepage?

Yes. Add a T123 block on the homepage only, paste the snippet, and publish that page. The script will not load on other pages.

What if I don't see "Edit code inside HEAD tag" in Site Settings?

Your Tilda plan may not include Custom Code access. Upgrade to a plan that supports it, or use the T123 block method on each page you need.

Does the T123 block work in Zero Block?

Tilda's help center states you can embed HTML as a separate element in Zero Block, and it works on the same principle as the T123 block. Use whichever fits your workflow.

Why does SeaText require a real domain, not localhost?

SeaText associates traffic with your account via the domain. Localhost and dynamic development domains cannot be reliably linked, so they are restricted for security. (S1)

How do I verify the script is working?

After publishing, visit the page and stay for at least 40 seconds. In your SeaText dashboard, the site name should appear next to the SeaText logo within five minutes. (S1)

Can I use the same SeaText account on a staging subdomain and production domain?

No. Each SeaText account is linked to a single primary URL. Create a separate account for staging if you need full functionality there. (S1)

What happens if I paste the script in the BODY field instead of HEAD?

The script will still load but later in the page lifecycle. SeaText's real‑time rewrites and bot detection work best when the script is in HEAD. Use the HEAD field for production.

You pasted the SeaText snippet into Tilda, saved, and maybe even published — but the dashboard still shows zero impressions, zero variants, zero everything. That usually means one of three things: the script never loaded because of a Content Security Policy (CSP) header, the page visitors see isn't the one you published, or the traffic hasn't hit the minimum volume SeaText requires before it starts reporting.

SeaText's Tilda integration guide is explicit: paste the JavaScript into Site Settings → Edit code inside HEAD tag, then save and publish. For a single page you can also use a T123 block, but the same publish step applies. After publishing, you must visit the live page yourself, stay at least 40 seconds, and wait five minutes for the site name to appear next to the SeaText logo. Until that handshake completes, the account isn't linked and no data is recorded.

How SeaText Data Collection Works on Tilda

SeaText injects a lightweight JavaScript file into the <head> of every page. That script watches visitor behavior — scroll depth, time on page, clicks — and sends batches of events to SeaText's servers. The dashboard only populates after the server receives enough events to pass its internal noise filter. If the script never executes, or if it executes but the events are dropped, the dashboard stays empty.

Tilda serves pages from its own CDN. When you add code via Site Settings → Edit code inside HEAD tag, Tilda injects it into the global layout. When you use a T123 block on a single page, Tilda injects it only into that page's HTML. Both methods require you to click Publish in the Tilda editor; saving a draft is not enough.

Common Reasons the Dashboard Stays Empty

1. Content Security Policy Blocks the Script

Tilda lets you set a CSP header under Site Settings → SEO → Content Security Policy. If that header includes script-src 'self' without adding SeaText's domain, the browser will refuse to load the script. Open the browser dev tools console on your live page; a CSP violation error like Refused to load the script 'https://cdn.seatext.com/...' because it violates the following Content Security Policy directive confirms this.

2. You Saved but Didn't Publish

Tilda distinguishes between Save (draft) and Publish (live). The SeaText snippet only reaches real visitors after you click Publish. Check the live URL in an incognito window — if you still see the old version, publish again.

3. Traffic Below the Reporting Threshold

SeaText filters out bot traffic and very low-volume sessions before showing numbers. A brand-new site with a handful of visits may not cross the threshold. The integration guide says to "visit or refresh your website several times and stay on your page for at least 40 seconds" — that's partly to generate the initial events that prove the connection works.

4. Development or Localhost Domains Are Restricted

SeaText explicitly blocks localhost, 127.0.0.1, and dynamic development domains (e.g., *.ngrok.io, *.vercel.app preview URLs). Each SeaText account is tied to a single primary domain. If you're testing on a staging subdomain that isn't the primary domain in your SeaText account, the script will load but the account handshake will fail.

5. Wrong Account or Multiple Domains on One Account

The source pack states: "Each SEATEXT AI account is linked to a single primary URL. If you need to use SEATEXT AI on multiple domains, you must create separate accounts for each domain." Using one account across a production domain and a Tilda preview domain will keep data from appearing for either.

Diagnostic Sequence: Find the Root Cause in Order

1. Open the live URL in incognito. Verify the page you see is the published version.
2. Open DevTools → Console. Look for CSP errors, 404s on the SeaText script, or JavaScript errors that stop execution.
3. Check Network tab. Filter for "seatext". The script should load with 200 OK. If it's blocked, the CSP header is the culprit.
4. Verify the script is in the <head>. View page source; search for seatext. If it's missing, you edited the wrong setting or forgot to publish.
5. Stay on the page 40+ seconds. Then wait five minutes. Check the SeaText dashboard — the site name should appear next to the logo.
6. Send a few real visits. Ask a colleague to visit from a different IP. Wait 10–15 minutes. Data should appear if volume crosses the threshold.
7. Confirm domain matches account. In SeaText dashboard, the primary URL must exactly match the live Tilda domain (including www vs non-www).

Key Facts

Limitations and When This Advice Doesn't Apply

• If you're using a Tilda export (static HTML hosted elsewhere), the CSP and publish steps differ — check your hosting provider's headers.
• If SeaText's own servers are down, no troubleshooting on your side will help. Check status.seatext.com.
• This guide covers the JavaScript snippet method. If you're using a server-side integration (not offered for Tilda), the failure modes are different.
• Custom Tilda blocks or third-party scripts that rewrite the DOM after SeaText loads can interfere; that's outside SeaText's control.

Terminology

• CSP (Content Security Policy): HTTP header that tells the browser which sources are allowed to load scripts, styles, fonts, etc.
• Primary URL: The single domain a SeaText account is bound to; all traffic must originate from this domain for data to be attributed.
• T123 block: Tilda's generic HTML/embed block used to inject custom code into a single page.
• Handshake: The first successful event batch that links a live domain to a SeaText account; confirmed when the site name appears next to the logo.
• Reporting threshold: Minimum event volume SeaText requires before showing numbers in the dashboard (filters bots and noise).

FAQ

Why does the SeaText script load but the dashboard still shows zero after a week?

Likely the traffic is below the reporting threshold or the domain in the browser doesn't match the primary URL in your SeaText account. Verify the exact domain (including subdomain and www) in SeaText settings.

Can I use one SeaText account for my main site and a Tilda landing page on a subdomain?

No. The source pack says each account is linked to a single primary URL. A subdomain counts as a different domain. Create a second SeaText account for the subdomain.

How do I fix a CSP block on Tilda?

Go to Site Settings → SEO → Content Security Policy. Add SeaText's script domain (e.g., https://cdn.seatext.com) to the script-src directive. Save and publish.

Does SeaText work on Tilda's free plan?

Yes, as long as you can edit the HEAD code (available on all paid Tilda plans; free plan may restrict custom code). Check your Tilda plan features.

What if I pasted the code into the <body> instead of <head>?

SeaText recommends the <head> for reliable loading. Body placement can work but may delay execution, causing missed events. Move it to the HEAD field and republish.

How long until I see variant impressions after the handshake?

Variant impressions require the AI agents to be activated in the SeaText dashboard (Step 2: "Activate the autonomous agents you need"). Without active agents, the script only collects baseline data.

Can I test SeaText on a Tilda preview URL (*.tilda.ws)?

Dynamic development domains like *.tilda.ws are restricted. Use a real custom domain connected to Tilda for testing.

Use SeaText AI when you want fully automatic translation with no page limits and minimal upkeep. Use WPML when you need a traditional multilingual plugin and are ready to manage translation work yourself. The right choice depends on how much control you need versus how fast you want to go live in multiple languages.

Choose SeaText AI if: you want to translate an Elementor or Divi site without building a translation project. Activate once, and new pages, posts, products, and headline changes stay translated in the background. SeaText supports 125 languages, so you can open your site to new markets quickly.

Choose WPML if: you already plan to run a manual translation process and want the flexibility of a traditional plugin. WPML is often discussed as a tool for users who need per-language metadata, custom strings, and manual control. Check with the vendor to confirm the current feature set for your version.

Conditional recommendation: Start with SeaText AI for most Elementor and Divi sites. If you later hit SEO or customization limits, test WPML against those requirements. Expect a higher maintenance workload when you move to a manual workflow.

Why this decision matters

The tool you choose changes your daily workload. SeaText AI removes manual translation work. WPML puts you in control of each step. Neither is wrong. They serve different workflows.

A fast launch matters if you want to test new markets. A manual workflow matters if you need human review at every stage. For Elementor and Divi sites, the decision also affects how you handle page builder content. SeaText sees the finished WordPress page. WPML tends to involve more manual steps for templates.

The cost of a wrong choice appears later. A manual plugin can consume hours every week. An automatic tool may not provide enough control for regulated content. Think about your content update frequency before choosing.

How SeaText AI works for Elementor and Divi

SeaText detects each visitor's language and translates the page automatically. That is the core workflow. After you activate the WordPress plugin, translation runs by itself.

Publish a new WordPress page, product, post, or headline. SeaText sees it and translates it. This happens in the background. You do not need to open a translation interface or submit a ticket.

SeaText is built for WordPress and the tools you already use. That includes page builder output from Elementor and Divi in normal publishing workflows. When you publish a page from Elementor or Divi, SeaText sees that page and translates it.

The plugin supports 125 languages. It has no page limits and no language limits. The free tier means you can activate without a large upfront commitment. SeaText's own site says you can translate your WordPress website into 125 languages for free.

Automatic does not mean uncontrolled. You can edit translations. You can preserve brand voice. You can review key pages. You can also use advanced A/B-tested translation when you want to find the message that sells best in each market.

SeaText provides free automatic multilingual SEO for every translated page. For new content, the process is set-and-forget. Updates are translated in the background.

How WPML works for Elementor and Divi

WPML is a traditional multilingual plugin. It is designed for users who want to manage translation workflows manually. In common WPML workflows, you create separate posts or pages for each language, or you use a string translation interface.

You may also need to assign translators and review output. For Elementor and Divi, users often work with duplicated templates and translate modules separately. This is a common topic in WPML documentation and user forums.

A Reddit thread linked at the end of this article discusses WPML and Elementor multilingual search. It shows how real users ask about search and compatibility issues.

WPML-specific points here are framed as common workflows, not tested claims from the SeaText source pack. Confirm current details with WPML. If you choose WPML, budget time for setup, translation, and ongoing maintenance.

Main trade-offs: speed vs. control

• Speed: SeaText translates automatically in the background. WPML manual workflows can take longer.
• Control: Typical WPML workflows allow more granular string, meta, and template control. SeaText lets you edit translations and preserve brand voice.
• Cost: SeaText has a free tier and no page or language caps. WPML pricing varies, so check with the vendor.
• Maintenance: SeaText continues translating new content by itself. WPML requires repeated manual work when content changes.
• SEO: SeaText adds free automatic multilingual SEO to translated pages. If you need manual per-language metadata, typical WPML workflows give you that option.

Decision checklist: Which fits your site?

Use this checklist to match the tool to your site.

1. How fast do you need to launch? SeaText activates in about one minute. WPML setup and translation can take days or weeks.
2. Do you want automatic translation? SeaText detects each visitor's language and translates the page automatically. It also translates new content in the background.
3. Do you need a free start? SeaText offers a free tier. It supports 125 languages with no page caps or language caps.
4. Do you need manual control over every string? Typical WPML workflows provide that control. Expect more work.
5. Do you need per-language SEO? SeaText provides automatic multilingual SEO. If you need manual metadata such as titles, descriptions, or hreflang, plan to use WPML or edit SeaText output where supported.
6. Are you using custom Elementor or Divi widgets? Test each tool with your actual templates. SeaText handles normal pages, but custom-coded widgets may need review.

Simple decision path: if you want automation and low maintenance, choose SeaText. If you need manual control and are ready to invest time, choose WPML.

Practical scenarios for Elementor and Divi sites

Scenario one: a design agency wants to sell templates in multiple markets. SeaText AI launches quickly in 125 languages with no translation project. The agency can activate the plugin and publish.

Scenario two: a legal firm needs exact wording in every language. Use a manual workflow with WPML and professional reviewers, or use SeaText with a mandatory human review process. Machine translation should not be the only step.

Scenario three: a blog publishes daily updates. SeaText translates new posts in the background. A manual plugin would create recurring work for every post.

Limitations and when this advice does not apply

SeaText AI is strong for automatic translation, but it has limits. Custom-coded widgets or hardcoded strings may not translate cleanly. Test on a staging site.

Machine translation is not a substitute for certified human review. If your site needs legal or regulated translations, add a review workflow.

Images, dynamic content, and custom post types may need special handling. SeaText's FAQ includes a question about pictures and images. Check with SeaText if your setup depends on these.

WPML workflows give you more manual control, but they do not guarantee better translations. You still need skilled translators or editors.

If your content changes often, any manual workflow will require regular updates. SeaText's background translation reduces that recurring work.

Frequently asked questions

Is SeaText AI free?

Yes. You can translate your WordPress website into 125 languages for free. SeaText has no page caps and no language caps. Paid plans add more features. Check the SeaText pricing page for current details.

Can I edit translations created by SeaText AI?

Yes. Automatic does not mean uncontrolled. You can edit translations, preserve brand voice, review key pages, and use A/B-tested translation when you want to find the best message for a market.

Does SeaText AI work with Elementor and Divi?

SeaText is built for WordPress and the tools you already use. In normal workflows, SeaText sees newly published pages and translates them. If you have custom widgets, test them on a staging site.

How does SeaText handle new content?

New pages, posts, products, and headline changes are translated automatically in the background. Publish a change, and SeaText sees it and translates it.

Which option is better for SEO?

SeaText adds free automatic multilingual SEO for every translated page. If you need manual per-language SEO controls, typical WPML workflows provide them. Define your exact SEO requirements before choosing.

Can WPML handle Elementor and Divi?

WPML is often used with Elementor and Divi, but the setup depends on the plugin versions and your templates. See the WPML and Reddit resources below. Check with the vendor for current compatibility.

Key facts about SeaText AI

You cannot verify a localhost site directly in Google Search Console. Search Console is built to fetch your site from a public URL, and localhost exists only on your computer. The workaround is to create a temporary public URL with a tunnel like ngrok, add that URL as a URL prefix property, and prove you control it by uploading an HTML file.

This guide walks through that process, shows you where things break, and explains why a staging server is the better long-term answer.

Why localhost can't be verified directly

Google Search Console verifies that you own a site by making Google fetch a known file or a DNS record. It can't fetch localhost because that hostname points to each computer's own loopback address. On your machine it's your site; on Google's server it's Google's own machine. That's why you always get a "couldn't verify" error when you try a local URL.

This isn't a temporary glitch. It's a core rule: Search Console only works with publicly reachable URLs.

What you need before you start

• A local site that is running and shows in your browser at http://localhost or a custom port like http://localhost:3000.
• ngrok, or another tunnel service, installed on your computer. This guide uses ngrok because it's free and quick.
• A Google account you can use to log in to Search Console.
• Write access to your site's root folder so you can drop in the verification HTML file.

Step 1: Expose localhost with a public tunnel

1. Open a terminal and run ngrok http 80. If your local server uses a different port, replace 80 with that port, such as ngrok http 3000.
2. Copy the forwarding URL that appears. It will look like https://12345abcd.ngrok-free.app.
3. Open that URL in a browser. If you see your local site, the tunnel works.
4. Keep the ngrok process running. If you stop it, the URL stops working.

Free ngrok URLs are random and change every time you restart the tunnel. For a quick verification test, that's fine. For anything you need to keep alive, you'll need a paid plan with a reserved domain or a different setup.

Step 2: Add the site as a URL prefix property

1. Go to Search Console and click Add property.
2. Choose URL prefix, not Domain.
3. Paste your ngrok URL into the field, including https://.
4. Click Continue.

Why URL prefix and not Domain? A domain property needs a DNS TXT record. You don't control DNS for an ngrok URL or for localhost, so that method can't work here.

Step 3: Verify ownership with an HTML file

1. In the verification screen, pick the HTML file option. Search Console gives you a file with a long name ending in .html.
2. Save that file into your site's root folder. This is the folder where your main index.html lives.
3. Check that the file is reachable through the ngrok URL. For example, if your URL is https://12345abcd.ngrok-free.app and the file is named google12345.html, open https://12345abcd.ngrok-free.app/google12345.html.
4. Go back to Search Console and click Verify.

If verification fails, the most common cause is that the tunnel died, the file is in the wrong folder, or the tunnel provider blocked Google's fetch with a warning page. Check the file URL in an incognito window first.

If your site is a single-page app that requires JavaScript to render, use the meta tag method instead. Add the meta tag to the head of your main HTML file, serve it through the tunnel, and let Search Console fetch the live page. The HTML file method is simpler for most static or server-rendered sites.

Step 4: Confirm verification and test with URL Inspection

After Search Console shows you as the owner, you can open the URL Inspection tool and paste a test page route from your local site. The tool will fetch that URL and show whether Google can render it. Keep in mind this is only for the temporary tunnel URL. It won't give you data for your real domain, and it won't make localhost pages rank in Google.

You can test the exact route that corresponds to your local file. For example, if you have a page at /products on localhost, you can test https://your-tunnel-url/products.

Common mistake: using a domain property for localhost

Many people try to verify localhost by selecting the "Domain" property type. That requires adding a TXT record to your domain's DNS. localhost doesn't have DNS, and you don't own the DNS for a free ngrok URL. You will get stuck at the "Check DNS" step forever. Always use the URL prefix property when working with a tunnel.

Better long-term alternative: deploy to a staging site

If you're doing this for a project that will eventually go live, don't rely on an ngrok URL for Search Console. Deploy the current build to a staging platform that gives you a public URL, such as Netlify, Vercel, or GitHub Pages. Add that URL as a URL prefix property and verify it with the HTML file. Then, when you move the same code to your real domain, add that separate property as well. This keeps Search Console data tied to the correct public URLs from day one, and it avoids the temporary tunnel problem.

Limitations and when this workaround doesn't fit

• An ngrok URL only lives as long as the ngrok process is running. Restart it, and the free URL changes, orphaning your verified property.
• Search Console reports for the tunnel URL are for that tunnel only. They will not transfer to your real domain or influence your site's rankings on that domain.
• Free tunnels sometimes show a browser interstitial page. If Googlebot can't get past it, verification will fail. You may need a paid tunnel plan or a different method.
• If your local site uses a service worker, auth, or JavaScript that hides content from Googlebot, the URL Inspection tool may show a blank page even after verification.
• SEATEXT AI, which is a separate tool, also restricts localhost for security reasons. According to its integration docs, each account is tied to a single primary URL, and you must use a valid, real domain instead of localhost.

Key facts from the SEATEXT integration docs

Frequently asked questions

Can I use Google Analytics instead of an HTML file to verify a tunnel URL?

If your local site loads Google Analytics globally, Search Console offers that method. However, the analytics code must be present on the exact URL you're verifying. For localhost testing, the HTML file is more reliable because you know exactly where it lives.

How long does an ngrok URL stay valid?

Free ngrok URLs stay valid as long as the ngrok process is running. Restarting the process gives you a new URL, so the Search Console property will point to a dead address. Paid plans let you reserve a stable domain.

Will Search Console index localhost content after verification?

No. Verification proves you control the public tunnel URL, but Google indexes pages on stable public URLs. The local files themselves are never crawled from your computer.

Can I verify localhost with a DNS TXT record?

Only if you own the domain and can create DNS records. localhost has no DNS, and free tunnel domains like ngrok-free.app are owned by the tunnel provider. So a domain property is not an option in this case.

Why does SEATEXT restrict localhost?

The SEATEXT integration guide says development URLs such as localhost are restricted for security reasons. Each account is linked to a single primary URL, so you need a valid, real domain and a separate account for each domain.

Activation asks you to stay on the page for 40 seconds because that visit is the signal that connects your website to your SEATEXT account. The script has to load, recognize a genuine page view, and send that event back to the server. If you leave before that happens, the AI stays inactive and your site name won't appear in the dashboard.

The 40-second wait also works as a lightweight human check. Installing a script is easy to automate, but a real person is more likely to stay, refresh, and watch for the connection. That makes the activation step harder to fake.

What the 40-second wait is really checking

During the wait, the system can confirm four things:

• The JavaScript code is actually present on your page.
• The page is running on a domain that SEATEXT can identify.
• The script can reach the SEATEXT service from your site.
• The visit belongs to the account that owns that domain.

You don't see those checks. You just see a normal page and a timer in the instructions. The 40 seconds gives each check time to finish.

An expert's view: why 40 seconds?

From a developer's perspective, 40 seconds is a buffer, not a magic number. JavaScript often waits for the page to finish loading, and browsers may delay third-party scripts. A 40-second window gives the script time to execute, send its signal, and retry if the first attempt fails.

The number also matters for security. Browsers already use the idea of “user activation”: certain APIs only work after a real click or tap from a human. The 40-second stay is similar. A human can wait 40 seconds without trying to automate anything; a simple bot often cannot or will not.

There is no public formula that says why 40 is exactly the right number. In practice, it's long enough to separate a real setup from an accidental visit, and short enough not to feel like a time-out.

Account and domain linking

The 40-second visit does more than start the AI. It links that specific URL to your SEATEXT account. According to the official setup instructions, each SEATEXT AI account is linked to a single primary URL.

That means the page you stay on matters. If you stay on a staging domain that happens to be on the same server, the account may not link correctly. Development URLs such as localhost are restricted for security reasons. You need a valid, real domain.

If you run several websites, create one account for each website. You can't use the same account to activate multiple distinct domains.

What changes if you skip or interrupt the wait

Leave too early and the signal may never complete. The site name won't appear next to the SEATEXT logo, and the system won't know the page is yours. You'll also be stuck before the next step, which is activating AI in the Main AI Hub.

There's a safety benefit here. The AI remains inert until activation, so your content isn't changed while the script is still unlinked. Skipping the wait doesn't cause damage; it just keeps activation from happening.

Limitations: when the 40-second rule does not apply

The instruction assumes a normal production website. These common setups need different handling:

• localhost: restricted for security reasons. Use a real domain.
• Dynamic development domains: may not work reliably because SEATEXT AI might not be able to associate traffic with your account.
• WP Engine: install the WP Engine plugin that lets you add custom JavaScript, then apply it across all pages.
• Multiple domains: create a separate account for each primary URL.

The 40-second wait is also a setup step, not a rule for every visitor. Once the site is linked and activated, the AI runs on its own.

How to tell activation worked

After your 40-second visit, wait at least five minutes. The main signal is your website name appearing next to the SEATEXT logo at the top of the setup page. That tells you the URL is connected and you can move on to the Main AI Hub.

If you see your site name, activation succeeded. From there, go to the Main AI Hub, choose the AI you need, and click Configuration to adjust settings. You can also edit the first round of translations and variants under Variants Edit.

If the website name still doesn't appear

Try these checks in order:

1. Confirm you created the SEATEXT AI account before installing the script.
2. Confirm the script was added to every page, not just the home page.
3. Use a valid, real domain; localhost and dynamic development domains are restricted.
4. Stay on the page for the full 40 seconds after refreshing, several times.
5. Wait the full five minutes before checking.
6. If 10 minutes pass with no website name, contact SEATEXT support. That usually points to an installation problem on your platform.

What activation unlocks

Activation is the gate before the AI agents can run. Once the site is linked, you can turn on agents for conversion-rate optimization, Google Ads landing page rewrites, translation into 125 languages, bot-click refund reports, and more. The setup page says to proceed to the Main AI Hub to activate the AI you need.

Before activation, those agents have nothing to work on. The script is inert. That's why the 40-second wait is worth getting right.

Key facts

Terminology you might see in the dashboard

Activation: the step that turns an installed script into an active AI connection.

Link to your account: binding the primary URL to your SEATEXT account.

Inert: the script is installed but is not doing anything yet.

Primary URL: the main domain associated with one account.

Main AI Hub: where you activate the AI agents and adjust configuration after the site is connected.

Frequently asked questions

What if I leave after 20 seconds instead of 40?

Activation may not finish, and your website name won't show up next to the SEATEXT logo. Go back, refresh the page, and stay for the full 40 seconds.

Why do I need to wait five minutes after the 40 seconds?

The 40 seconds lets the script send its signal. The next window gives the SEATEXT service time to update the account page with your website name. If you still don't see it after 10 minutes, contact support.

Can I activate SEATEXT on localhost?

No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.

Can I use one SEATEXT account for two websites?

No. Each SEATEXT AI account is linked to a single primary URL. Create a separate account for each website.

What does “AI remains inert until activated” mean?

The script is safely installed on your page but does not change content, write variants, or run agents until the activation step links it to your account.

Does every visitor need to stay for 40 seconds?

No. The 40-second instruction is part of the setup and account-linking process, not a rule for visitors after the site is activated.

Need the actual code and the current setup steps? Go to the General Integration page.

What counts as “SeaText AI is active”?

SeaText AI is active when two things are true: the SeaText JavaScript is loaded on your live site, and the AI agents you turned on in the dashboard are running. If the script loads but no agent is activated, the page may be “wired” without doing anything visible. If agents are on but the script is missing, nothing runs. Verification covers both.

Before you verify, make sure you have a SeaText AI account, because the script is tied to the account used during installation. The same script built for your production domain will not associate traffic with an account that points to a different domain.

1. Check the page source for the SeaText script

Open your site in a browser, right-click the page, and choose View Page Source (or press Ctrl+U on Windows / Cmd+Option+U on Mac). Search for "seatext" or "SEATEXT".

• If you find a script tag that loads a SeaText JavaScript file, the code is installed.
• If you find nothing, the script is missing from that page, or you are looking at a cached version.

Note that the presence of the code is only step one. It means the integration is present; it does not yet prove the AI is active and linked to your account.

2. Use browser developer tools to see network requests

Open Chrome, Firefox, or Edge and press F12 (or right-click → Inspect). Go to the Network tab, reload the page, and look for requests to SeaText domains or files with “seatext” in the name.

A few tips for this step:

• Reload the page while the Network tab is open so the request list is fresh.
• Filter by “seatext” using the filter box.
• Watch for a script file or API call that returns a 200 OK status.

If the request fails (a red status, or a blocked request), the script may still be installed but the site may be blocking it through a content security policy or an ad blocker. Test in a private window with extensions disabled to rule out browser extensions.

3. Wait and refresh — the activation handshake

The SeaText installation instructions say to visit or refresh your website several times, stay on the page for at least 40 seconds, and wait at least five minutes. During that time, SeaText links the traffic to your specific account. This is often the difference between a script that loads and a script that “works.”

While you wait, close other tabs that use the same account, and use the real production domain, not localhost or a dynamic development URL. Those domains are restricted for security reasons.

4. Check your SeaText account for your website name

Log in to your SeaText account and look near the SEATEXT logo at the top of the page. If your website name appears there, SeaText is connected and ready for the next step. If it does not appear after ten minutes, the installation instructions say to contact support immediately, because something is wrong during installation on your platform.

5. Activate an agent and watch the live result

The most visible confirmation is seeing an AI agent actually do something. In your SeaText account, go to the Main AI Hub and turn on whichever agents you need on the pages you want. Then return to your site and look for the expected change:

• Google Ads or keyword rewrite agents: arrive on a page from the matching ad or keyword, and the headline or CTA may change.
• Translation agents: view the page in another one of the 125 supported languages.
• Chat agents: open the page and look for the proactive chat that appears after a short dwell time.
• A/B test agents: refresh and compare versions across sessions.

If the agent is on but nothing changes, check that the page URL you are testing is included in the configured scope, and that you are viewing a fresh page load rather than a cached copy.

Key facts to remember about verification

Why the “40 seconds” instruction matters

It is easy to paste the JavaScript, reload, and assume everything is live. SeaText needs enough time on the page to register a real visitor session. If you reload too quickly, the script may not complete the handshake, and the account link may not happen.

Aim to keep the page open and keep interacting with it. After that, wait at least five minutes before checking the dashboard again. The dashboard only shows the website name once the link is established.

How to verify by viewing AI responses in live traffic

Sometimes the script is installed and connected, but you want proof in real time. You can:

1. Open the page you configured.
2. Approach it using the source you want to test, such as a paid ad keyword or a referral link, because some agents only react to the visitor source.
3. Watch the page for visible changes in the first few seconds.
4. Open your SeaText dashboard and check the reporting for that page or variant.

If the report shows impressions, sessions, or variants for the URL, that is strong evidence the AI is active.

Limitations and exceptions

Verification is not always instant. A cached page may hide the script even when it is live. A CDN may serve an older version. A content security policy can block the external script without telling you in the page source. And browser extensions such as ad blockers can block SeaText requests while hiding that from the normal view.

Development domains, such as localhost, are restricted and may not associate properly with your account. Dynamic development domains may also fail. If you test on a staging domain, create a separate SeaText account for that domain, since each account is linked to a single primary URL. When you need SeaText on several websites, use one account per website.

Frequently asked questions

Does seeing the script in my source code mean the AI is active?

No. The script must be installed, the account must be linked, and the AI must be activated in the Main AI Hub. The source code only confirms the first part.

How long does activation take?

You should visit or refresh your site several times, stay on the page for at least 40 seconds, and wait at least five minutes before expecting your website name to appear next to the SEATEXT logo. If it does not appear after ten minutes, contact support.

Why is my website name not showing in the dashboard?

Common causes are a blocked script, an unactivated agent, a cached page, or using a development URL. Also confirm you are logged into the correct SeaText account for the domain.

Can I use SeaText on localhost or a staging domain?

The instructions say development URLs like localhost are restricted for security reasons, and dynamic development domains may not function properly. Use a valid, real domain. If you need multiple domains or websites, create a separate account for each.

Will I see changes immediately after activation?

Some agents, such as chat or keyword rewrites, can act in real time. For others, you may need to refresh the page or wait for the agent to run through its testing cycle. Check the dashboard reporting for evidence by page, keyword, and variant.

SeaText AI on a development domain acts as a sandbox. It lets you generate copy, run SEO experiments, and verify integrations while the site is hidden from real users. By testing first, you catch formatting bugs, AI misbehavior, and performance issues before they affect live traffic.

Each SEATEXT AI account is linked to a single primary URL. For a development site, you need a separate account. This isolation keeps the AI inert on production until you deliberately activate it there. It also protects content integrity.

Why Test on a Development Domain?

Development testing matters because SeaText AI works by injecting JavaScript into every page. If that script is installed incorrectly, the problem can affect the entire site. A development domain gives you a safe place to check the script before real visitors rely on it.

• Risk-free experimentation: Try headline rewrites, translation variants, or SEO copy without exposing unfinished content.
• Integration testing: Confirm the JavaScript snippet works with your CMS, plugins, or custom code.
• Performance validation: Measure load times and script execution on a test server before going live.
• Content integrity: The AI remains inert until activated, but you still need to verify which pages it will change.
• Security compliance: Localhost is restricted, so a development domain must be a real domain. This matches SeaText's security model.

Development vs. Production: What Changes?

The main difference is exposure. A development domain is not public. A production domain is live. The script, activation rule, and account structure are the same, but the risk level is not.

Use a development domain when you are building or verifying. Use production only after the connection check passes. Do not use localhost for either because SeaText restricts development URLs such as localhost for security reasons.

How SeaText AI Activation Works

SeaText AI installs through a JavaScript snippet. The General Integration page provides the code. You paste that code into your site. The script stays inert until activation.

Activation is not instant. You must visit or refresh your website several times and stay on a page for at least 40 seconds. That visit links the traffic to your account. After at least five minutes, check the SeaText dashboard. Your website name should appear next to the SEATEXT logo. That confirms the site is connected.

Each account is linked to one primary URL. Dynamic development domains may not work because SeaText AI might not reliably associate traffic with your account. Use a stable, real domain for development.

This is why testing on a development domain is useful. The same activation process will happen on the live site later. You can see whether it works before customers do.

Setup Process for a Development Domain

1. Create a SEATEXT AI account for the development domain. Each account links to one primary URL.
2. Open the General Integration page and copy the JavaScript code provided by SEATEXT AI.
3. Install the code across all pages. If you use WP Engine, download the WP Engine plugin and apply it across all pages.
4. Visit the development site several times. Refresh pages and stay on each page for at least 40 seconds so the AI can link to your account.
5. Wait at least five minutes. Check for your website name next to the SEATEXT logo at the top of the SeaText page.
6. If the name does not appear after 10 minutes, contact the SeaText support team.
7. Go to the Main AI Hub and activate the AI agents you need on your preferred pages.
8. Use Configuration to adjust AI parameters.
9. Review output in Variants Edit to check translations and variants before production.

Troubleshooting Common Setup Problems

• No website name after five minutes: Wait a little longer. If it still does not appear after 10 minutes, contact support.
• You used localhost: SeaText restricts development URLs such as localhost for security. Use a valid real domain.
• Your development domain is dynamic: SeaText may not reliably associate traffic with dynamic subdomains. Use a stable domain.
• The AI seems inactive: Check the 40-second rule. Visit or refresh the page several times and stay on the page for at least 40 seconds.
• The wrong site is connected: Each account is tied to a single primary URL. Create a separate account for each domain.
• The logo check passes but no variants appear: Go to the Main AI Hub, activate the AI on your preferred pages, then use Configuration to set parameters.

Real-World Use Cases: SEO, Translations, and Conversion Experiments

SEO testing

The AI SEO Agent finds questions buyers ask and publishes helpful answer pages. On a development domain, you can see how those pages are built before they go live. You can check titles, headings, and internal links. You can also confirm that no unfinished pages get indexed.

Translation testing

The Translation Agent translates content into up to 125 languages. Translation quality matters. Use a development domain to review AI-generated translations in Variants Edit. Fix awkward wording before customers in other markets see it. This is safer than editing live pages after launch.

Conversion experiments

The Conversion Agent tests headlines, offers, and calls to action. You can run experiments on a development domain and observe how the AI generates variants. The A/B testing agent can scale winners. By testing first, you know which controls to copy to the production account.

Paid advertising setup

The Google Ads Agent rewrites landing pages to match visitor intent. If you are using paid campaigns, the last thing you want is a broken script on a live landing page. A development domain lets you verify that the script loads and that the AI is connected before you point ad traffic to production.

Expert Perspective: Why Staging Testing Prevents Production Problems

Expert perspective: From an implementation engineer's viewpoint, most SeaText problems are not AI model problems. They are integration problems. The JavaScript snippet runs on every page. If it is not installed correctly or the account is not linked, the AI cannot work.

I have seen teams skip staging to save time. They paste the script into production, wait for the 40-second activation window, and then discover the website name is not in the dashboard. Now they are debugging on a live site while customers are on it. That is avoidable.

Use a development domain with its own SeaText account. Do not try to use one account for both. Each account is linked to a single primary URL. When you use separate accounts, production stays untouched until you are ready.

After you install the script, visit the development page several times and stay for at least 40 seconds. Wait at least five minutes and check for the website name next to the SEATEXT logo. If it does not appear after 10 minutes, contact support. Do not move to production until that check passes.

This process looks like extra work, but it is faster than fixing a broken homepage. Testing on a staging domain also makes the promotion to production predictable. You know exactly which agents are activated and which pages they affect.

FAQ

Why can't I use localhost for SeaText AI?

SeaText restricts development URLs such as localhost for security reasons. You must use a valid, real domain.

Can one SeaText account cover both development and production?

No. Each account is linked to a single primary URL. Create separate accounts for separate domains.

What is the 40-second activation rule?

You must visit or refresh your website several times and stay on a page for at least 40 seconds. This activates the AI and links it to your account.

How do I know my development domain is connected?

Wait at least five minutes. Check for your website name next to the SEATEXT logo at the top of the SeaText page. That indicates the website is connected.

What if the website name does not appear after 10 minutes?

Contact SeaText support immediately. It could indicate an issue during installation on your platform.

Can I copy settings from development to production?

You can use the same configuration approach, but each domain needs its own account. You must create a separate account for production and apply the same settings manually.

Can I use SeaText on multiple websites?

To use SeaText on several websites, create one account for each website.

You can add SeaText AI to your website in a few minutes using a JavaScript snippet. The script goes into your HTML, usually just before the closing </body> tag, and then you activate the AI agents you want from your SeaText account. The AI stays dormant until you activate it, so your live content is safe while you set things up.

This guide walks through the exact steps, what to check after installation, and the common mistakes that delay activation. You will also learn what the JavaScript does, how to handle multiple domains, and what to do if the connection does not appear.

Prerequisites Before You Add the Script

You need three things ready before you paste any code:

• A SeaText AI account. If you do not have one yet, create it first. The script is tied to your account and your primary domain.
• Access to your website's HTML or template files. You can edit the theme, header, or footer directly, or use a tag manager or plugin that lets you add custom JavaScript.
• A live, real domain. Development URLs such as localhost are restricted for security reasons. Use a valid production domain for the account you are connecting.

Step 1: Copy the JavaScript Code from Your SeaText Account

Log in to your SeaText AI account and open the General Integration page. The JavaScript snippet is provided there, ready to copy. Do not modify the snippet. It contains the identifiers that link your website to your account.

If you use WPEngine, SeaText recommends downloading the WP Engine plugin that lets you add custom JavaScript to your pages. Install the plugin and apply the script across all pages. On other platforms, you can paste the snippet directly into your theme's footer or use a tag manager.

Step 2: Paste the Script Before the Closing Body Tag

Place the JavaScript just before </body> in your HTML. This position lets the page content load first, so the script does not block rendering. If you use a CMS, the usual places are:

• Theme footer file — edit footer.php in WordPress, or the equivalent footer template in your CMS.
• Custom HTML block — add a block or widget that renders site-wide, such as a footer widget.
• Tag manager — create a custom HTML tag that fires on every page.
• WPEngine plugin — use the plugin SeaText recommends for WPEngine sites and apply it across all pages.

Apply the script to every page where you want SeaText to work. A partial install means some pages will not connect or activate.

Step 3: Visit Your Website Several Times to Activate the Link

After the script is live, open your website and browse a few pages. SeaText asks you to visit or refresh your site several times and stay on a page for at least 40 seconds. This activity helps the system associate your traffic with your account and activate the connection.

This step is not optional. The script alone does not finish the setup. Real visits are what link the site to your SeaText account.

Step 4: Wait Five Minutes and Check the SeaText Logo

Wait at least five minutes after your visits. Then look at the top of the General Integration page in your SeaText account. Your website name should appear next to the SeaText logo. That name is the signal that your site is connected and ready for the next step.

If you do not see your website name after 10 minutes, contact SeaText support. The delay can point to an installation problem on your platform, and support can help you fix it.

Step 5: Activate AI Agents in the Main AI Hub

Once your site is connected, go to the Main AI Hub in your SeaText account. Choose the pages where you want AI to run and activate the agents you need. Use the Configuration section to adjust the AI parameters for each agent.

SeaText provides an initial round of automatic translations and variants for testing. You can review them under Variants Edit in the left panel. Select the URL and language you want to edit, then review, create, or manually change the translations.

Common Mistake: Skipping the Activation Visits

The most common setup error is pasting the script and then waiting for something to happen. Nothing will happen until you visit your site and stay on pages long enough for SeaText to detect the traffic. If you skip the visits, the website name will not appear next to the SeaText logo, and you cannot activate any agents.

Another common mistake is using a development domain. SeaText restricts development URLs such as localhost for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate their traffic with your account. Use a real, stable domain for the account you are connecting.

How to Verify the Next Step Worked

After you activate an agent, check one page where it should run. Open the page in a normal browser session and look for the change the agent is supposed to make. For example, if you activated a translation agent, check whether the page appears in the language you selected. If you activated a conversion agent, check whether the headline or CTA variant appears.

Also check the Variants Edit screen in your SeaText account. It shows the URLs and languages that SeaText has processed. If a page is missing, revisit the page and wait a few minutes, then check again.

What the JavaScript Actually Does

The SeaText JavaScript is a loader. It connects your pages to SeaText's system and lets the platform observe visitor behavior and apply the agents you activate. The script itself does not change your content. SeaText states that the AI remains inert until activated, which protects your website's content during installation.

Once you activate agents, the script enables real-time changes such as keyword-matched headlines, translated text, or personalized CTAs. The script is the delivery mechanism; your SeaText account controls what runs and where.

Multiple Domains and Multiple Websites

Each SeaText account is linked to a single primary URL. If you need SeaText on multiple domains, such as a development domain and a production domain, create separate accounts for each domain. Do not try to share one script across unrelated domains.

To use SeaText on several websites, create one account for each website. This rule keeps traffic and activation data tied to the right account, which matters for reporting and agent behavior.

Key Facts About SeaText JavaScript Integration

Limitations and When This Advice Does Not Apply

This JavaScript integration works for standard websites where you can edit HTML or use a tag manager. It does not apply if your platform blocks custom scripts, if you cannot add code to every page, or if you are testing on a restricted development URL. In those cases, the connection will not activate, and you should contact SeaText support or use a supported plugin such as the WPEngine option.

The script also does not work as a one-time paste-and-forget solution. You must complete the activation visits and then activate agents in the Main AI Hub. If you only want static content changes, a manual edit may be simpler than activating an AI agent.

Frequently Asked Questions

How long does SeaText AI integration take?

The script itself can be added in under a minute. Activation takes a few extra minutes because you need to visit your site several times, stay on pages for at least 40 seconds, and wait about five minutes for the connection to appear.

Where exactly should I paste the SeaText JavaScript?

Paste it just before the closing </body> tag so it loads after your page content. Apply it across all pages where you want SeaText to run.

Why is my website name not showing next to the SeaText logo?

You may not have completed the activation visits, or you may be using a restricted development URL. Visit your live site several times, stay on pages for at least 40 seconds, and wait five minutes. If it still does not appear after 10 minutes, contact SeaText support.

Can I use one SeaText account for multiple domains?

No. Each SeaText account is linked to a single primary URL. Create separate accounts for each domain or website.

Does the JavaScript change my website content immediately?

No. The AI remains inert until you activate agents in the Main AI Hub. The script only connects your site to SeaText; it does not alter content on its own.

What should I do if I use WPEngine?

Download the WP Engine plugin that enables custom JavaScript, install it, and apply the SeaText script across all your pages.

How do I edit the translations or variants SeaText creates?

Log in to your SeaText account, open Variants Edit in the left panel, select the URL and language, and review, create, or manually edit the translations.

When you add the SeaText JavaScript snippet to your site, the script loads in the visitor's browser. It stays inactive until you activate it for specific pages. Once active, it reads the traffic source — Google Ads, Meta, email, referral, or direct — and captures the keyword that triggered a paid click. It also records the current page URL, the referring URL, and on‑page behavior such as scroll depth and dwell time. This data is sent to SeaText servers only to deliver adapted content in real time.

How the SeaText Script Captures Data

The integration guide (S1) explains that you copy a JavaScript code block into your website. If you use WP Engine, a plugin helps insert the code across all pages. After installation, the AI remains inert until you visit or refresh the page and stay for at least 40 seconds. That 40‑second dwell activates the AI and links it to your account. The script then begins detecting the visitor's origin. For paid traffic, it reads the campaign identifier and keyword. For organic or referral traffic, it reads the referrer header. It also monitors scroll position and time on page to trigger agents like the Scroll Slowdown Agent, which slows fast scrollers near calls to action.

All collection happens client‑side. The script does not write to cookies or local storage unless required for session detection. Data is transmitted to SeaText's infrastructure solely for the purpose of rewriting headlines, offers, product blocks, and CTAs before the page renders for that visitor.

What Data Is Collected

Based on the source pack (S1, S2, S3), the script gathers the following fields:

• Page URL – the address of the page being viewed.
• Referrer URL – the previous page that sent the visitor (e.g., Google search, email link, referring site).
• Keyword / campaign ID – the search term or ad campaign parameter from paid clicks (Google Ads, Meta, etc.).
• Scroll depth – how far down the page the visitor scrolls.
• Dwell time – how long the visitor stays on the page before leaving or converting.

These fields are used immediately by the AI agents to personalize content. The sources do not describe any additional data points such as device fingerprint, screen resolution, or browser history.

What Data Is Never Collected

The source pack does not state that the script collects personally identifiable information (names, emails, phone numbers, payment details). It also does not mention setting third‑party cookies or tracking users across unrelated websites. IP addresses are not discussed; there is no claim about temporary or permanent IP storage. Because the documentation is silent on these items, you should not assume they are collected or excluded. If your compliance requirements demand explicit guarantees, contact SeaText support for a data processing addendum.

Why This Data Collection Is Necessary

Each AI agent relies on the captured signals to perform its function:

• Google Ads Agent (S2, S3) – matches landing page copy to the exact keyword, boosting conversion rates by up to 35%.
• Bot Refund Agent (S2, S3) – analyzes click patterns to flag invalid traffic and builds refund‑ready reports for Google, Meta, TikTok, Reddit.
• Translation Agent (S2, S3) – serves content in up to 125 languages, opening new markets with up to 60% more international customers.
• Conversion Agent (S2, S3) – runs continuous A/B tests on headlines, offers, and CTAs to lift conversions by 25%.
• Scroll Slowdown Agent (S3) – detects rapid scrolling and inserts friction near key sections to increase engagement.
• Visitor Source Rewrite Agent (S3) – adapts messaging for traffic from email, referrals, Meta, and other channels.
• AI Personalization Agent (S3) – tailors copy to visitor context beyond keyword.
• Ecommerce Product Copy Agent (S3) – optimizes product names, descriptions, and CTAs for add‑to‑cart rate.
• AI SEO Content Factory (S3) – publishes indexed Q&A pages for long‑tail search demand.
• ChatGPT Brand Visibility Agent (S3) – shapes how AI assistants describe your brand.

Without the interaction data, none of these agents can operate. The script's design is purpose‑built: collect minimal signals, act in milliseconds, and discard after the session.

Key Facts About Data Collection

Limitations and When This Advice Does Not Apply

The script only runs on pages where you have installed and activated it. Each SeaText account is bound to a single primary domain (S1). If you operate multiple production domains, you need separate accounts. Development environments such as localhost or dynamic preview URLs are restricted and may not activate (S1). The 40‑second activation rule means very short visits (bounces) will not trigger AI optimization for that session. The system does not provide historical analytics dashboards or cross‑session user profiles; it is strictly a real‑time optimization layer. If you need long‑term visitor tracking, multi‑domain analytics, or detailed consent management, you must layer those tools separately.

Frequently Asked Questions

Does SeaText collect data from every visitor?

Yes, once the script is installed and activated on a page, it captures the listed interaction data for all visitors to that page. The data is used immediately for that visitor's session.

Can visitors opt out of data collection?

The source pack does not describe an opt‑out mechanism. The script is part of the page functionality. If regulations require consent, you must implement your own consent banner and conditionally load the script.

Is the data shared with third parties?

The sources state data is sent to SeaText servers for optimization. They do not mention sharing with advertisers, analytics providers, or other third parties.

How long is data stored?

The source pack does not specify retention periods. For session‑only optimization, data likely persists only for the duration of the visit. Contact SeaText for their data retention policy.

What happens if I don't install SeaText?

Your site will serve static pages to all visitors. You lose real‑time keyword matching, bot detection, translation, and automated A/B testing. Conversion rates and ad spend efficiency may remain lower than optimized peers.

Is the script secure?

The integration guide (S1) calls the installation process secure and notes the AI stays inert until activated. The script is a standard JavaScript snippet; it does not introduce known vulnerabilities.

Does SeaText work with development or staging sites?

Localhost and dynamic development domains are restricted for security reasons (S1). You must use a valid, publicly resolvable domain. Staging subdomains on a real domain may work if they match the primary URL pattern.

Tilda's free plan disables custom code injection, so the SeaText JavaScript snippet cannot run. There is no partial workaround; you must upgrade to a paid Tilda plan that allows head-tag or block-level HTML insertion.

Why Tilda Free Blocks SeaText

Tilda restricts the ability to add custom JavaScript on its free tier. The SeaText integration requires pasting a script into the site-wide head tag or into a page-level HTML block (T123). Both insertion points are locked on the free plan. The restriction is deliberate: Tilda reserves code injection for paid subscriptions to limit external scripts on free sites.

This means the SeaText snippet never reaches the browser. No script load, no AI activation, no translation, no conversion agents. The limitation is binary — either the plan permits code injection or it does not.

The Common Mistake: Pasting Code in the Wrong Place

Many users paste the SeaText snippet into Site Settings → SEO → Custom code or the Analytics field. Those fields accept meta tags and tracking pixels but do not execute JavaScript. The script sits inert in the page source and SeaText never initializes.

The correct locations are:

• Site-wide: Site Settings → More → HTML code for the head section → Edit code inside HEAD tag
• Per-page: Add block T123 (Other → T123) → Content → HTML editor

Both locations are unavailable on the free plan. Upgrading unlocks them.

How SeaText Integration Actually Works on Tilda

SeaText delivers a small JavaScript file that runs in the browser. On first load it fingerprints the page, then communicates with SeaText servers to activate the AI agents you have enabled (translation, CRO, bot detection, etc.). The script must be present in the <head> or in a block that renders before the closing <body> tag.

According to the official integration guide, after pasting the code you must visit or refresh your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your SeaText account. Then wait at least five minutes until your website name appears next to the SeaText logo in the dashboard.

What You Lose Without Code Injection

Without the script, none of SeaText's 20+ autonomous agents can function. That includes:

• Website Translation Agent — translates pages into 125 languages with control
• Conversion Agent — rewrites headlines, offers, and CTAs to lift conversion rates
• Google Ads Agent — matches landing page copy to each keyword in real time
• Bot Refund Agent — detects invalid clicks and builds refund-ready reports for Google and Meta
• AI SEO Content Agent — publishes indexed Q&A pages for long-tail traffic
• ChatGPT Brand Visibility Agent — shapes what AI assistants say about your brand

You also lose the ability to run A/B tests, personalize content by traffic source, or slow scrollers near CTAs. The free Tilda plan effectively makes SeaText invisible to your visitors.

Workaround Options and Their Trade-offs

Choose Upgrade Tilda if you want SeaText working this week with zero maintenance. Choose Migrate only if Tilda's paid plans exceed your budget or you need features Tilda lacks. Avoid the proxy route unless you have dedicated engineering resources and accept ongoing breakage risk.

Step-by-Step: Upgrading Tilda to Enable SeaText

1. Log in to Tilda and open Site Settings → Payment.
2. Select a plan that includes Custom code injection (Personal, Business, or higher).
3. Complete payment and confirm the plan is active.
4. Go to Site Settings → More → HTML code for the head section → Edit code inside HEAD tag.
5. Paste the SeaText JavaScript snippet from your SeaText dashboard.
6. Click Save, then Publish all pages.
7. Visit your live site, stay on a page for 40+ seconds, repeat a few times.
8. Wait five minutes, then check the SeaText dashboard — your site name should appear next to the logo.

If you prefer per-page installation, add block T123 (Other → T123) on each page, paste the snippet in the block's HTML editor, save, and publish.

Key Facts

Terminology

• Code injection: The ability to insert custom HTML/JavaScript into a page's head or body via the CMS interface.
• T123 block: Tilda's generic HTML/embed block used for third-party scripts on individual pages.
• SeaText snippet: The unique JavaScript code provided in your SeaText account that loads the AI agents.
• Agent: A specialized AI module (e.g., Translation Agent, Bot Refund Agent) that you activate in the SeaText dashboard.
• Activation: The process where SeaText detects live traffic on your domain and links the site to your account.

FAQ

Can I use SeaText on a Tilda free site by adding the script through Google Tag Manager?

No. Google Tag Manager itself requires code injection to load its container snippet. If Tilda blocks custom code, GTM cannot load either.

Does SeaText offer a no-code plugin or app for Tilda?

No. SeaText integrates via a JavaScript snippet only. There is no Tilda-native app or marketplace extension.

Will SeaText work on a Tilda free site if I embed it in an iframe?

No. Iframes isolate scripts from the parent page. SeaText needs direct access to your page DOM to rewrite content and track interactions.

What is the cheapest Tilda plan that enables SeaText?

The Personal plan (or equivalent current tier) includes custom code injection. Check Tilda's pricing page for the latest rate.

Can I test SeaText on a Tilda free site before upgrading?

Not on the live free site. You can test on a paid Tilda trial or a development domain (real domain, not localhost) with a separate SeaText account.

Does SeaText slow down my Tilda site?

The script is lightweight and loads asynchronously. SeaText states the installation process is secure and the AI remains inert until activated.

What happens if I downgrade Tilda back to free after installing SeaText?

The head-tag field and T123 block become unavailable again. The SeaText script will be stripped or ignored, and all agents will stop working.

Quick answer

To test SEO locally you need a web server that behaves like production, a real hostname (not localhost), and the same analytics, tag managers, and JavaScript bundles your live site loads. Spin up Docker (or XAMPP/MAMP), map a custom domain such as project.test to 127.0.0.1, install your CMS, then run a crawler (Screaming Frog, Sitebulb, or a headless Chrome script) against that domain. If you plan to test SEATEXT AI variants, create a dedicated SEATEXT account for the dev domain — SEATEXT rejects localhost and dynamic tunnels for security reasons.

Prerequisites

• Docker Desktop (Windows/Mac/Linux) or a traditional stack like XAMPP/MAMP.
• Hosts file or local DNS (dnsmasq, /etc/hosts, or a tool like lvh.me) to map a real-looking domain to 127.0.0.1.
• CMS or framework (WordPress, Next.js, Laravel, etc.) checked out and running.
• SEO crawler — Screaming Frog SEO Spider (free up to 500 URLs), Sitebulb, or a custom Puppeteer/Playwright script.
• SEATEXT account (optional) — one per domain, created at seatext.com.

Step-by-step setup

1. Install Docker Desktop and verify docker compose up works.
2. Create a project folder with a docker-compose.yml that defines web (nginx/apache+php or node), db, and optionally mailhog.
3. Choose a dev domain — e.g., myshop.test. Add 127.0.0.1 myshop.test to /etc/hosts (Linux/Mac) or C:\Windows\System32\drivers\etc\hosts (Windows).
4. Configure the web container to listen on port 80/443 and set server_name myshop.test; in nginx or ServerName myshop.test in Apache.
5. Bring the stack up: docker compose up -d. Visit http://myshop.test — you should see your site.
6. Install the CMS (WordPress, Drupal, headless build) and complete the setup wizard.
7. Add SEO tooling: Google Tag Manager container, GA4 measurement ID, and the SEATEXT snippet (if testing personalization).
8. Run a baseline crawl: open Screaming Frog, enter http://myshop.test, start crawl. Export the report — this is your "before" snapshot.
9. Make changes (title tags, structured data, canonicals, SEATEXT variants).
10. Re-crawl and diff the two exports. Verify that only intended URLs changed.

Why a real domain matters

SEATEXT AI explicitly restricts localhost and dynamic development domains: "Development URLs, such as localhost, are restricted for security reasons. Ensure you use a valid, real domain for these cases. Dynamic development domains may not function properly, as SEATEXT AI might be unable to reliably associate traffic with your account." (General Integration). The same principle applies to cookies, Service Workers, and third-party pixels — they often require a fully-qualified domain name with a valid TLD or at least a reserved TLD like .test, .local, or .internal.

Common stacks compared

Takeaway: Choose Docker when you need parity with production containers. Choose Valet/Herd for speed on Mac. Avoid public tunnels (ngrok, Cloudflare Tunnel) if you must test SEATEXT — they count as dynamic domains.

SEO-specific configuration checklist

• robots.txt — allow your crawler user-agent, disallow admin paths.
• XML sitemap — generate at /sitemap.xml and verify crawler reads it.
• Canonical tags — ensure they point to the dev domain, not production.
• Structured data — validate with Google's Rich Results Test against the local URL.
• Hreflang — if testing multi-language, include self-referencing tags on each locale.
• Core Web Vitals — run Lighthouse CI in headless mode against the local domain.
• SEATEXT snippet — paste the JavaScript from your SEATEXT account into <head>; wait 5 minutes, then refresh the page several times and stay 40+ seconds to activate the AI (General Integration).

Verification step

After the SEATEXT snippet is live, log into your SEATEXT dashboard. You should see the dev domain name next to the SEATEXT logo within 10 minutes. If it does not appear, check the browser console for CSP errors, confirm the domain matches the account exactly, and contact support if needed (General Integration).

Key facts

Limitations & when this advice doesn't apply

• No public DNS — if you cannot edit /etc/hosts (locked-down corporate laptop), use a reserved TLD like .internal with a local DNS resolver, or ask IT for a split-horizon DNS entry.
• Edge/CDN logic — Cloudflare Workers, Akamai EdgeWorkers, or Vercel Edge Functions do not run locally; mock them or test in a staging environment.
• Third-party APIs — payment gateways, search indexes, or personalization engines may sandbox or block dev domains. Use test credentials and webhook simulators (ngrok is fine for webhook receipt, not for SEATEXT).
• Crawler scale — Screaming Frog free stops at 500 URLs. Large sites need the paid license or a distributed crawl (Sitebulb Cloud, custom script on a VM).

Terminology

Virtual host

An nginx/Apache config block that maps a hostname to a document root, allowing multiple sites on one IP.

Reserved TLD

Top-level domains like .test, .localhost, .example, .internal guaranteed never to exist on the public internet (RFC 2606, RFC 6761).

mkcert

A tool that creates locally-trusted TLS certificates for any hostname, avoiding browser warnings.

SEATEXT variant

An AI-generated alternative version of a page element (headline, CTA, product description) served to a segment of visitors for A/B testing.

FAQ

Can I use localhost:3000 for SEO testing?

You can crawl it, but cookies, Service Workers, and SEATEXT will not work. Use a real hostname.

Do I need HTTPS locally?

Yes — Secure Contexts are required for Service Workers, Web Authn, and accurate Core Web Vitals. Use mkcert or Valet's built-in CA.

How many SEATEXT accounts do I need?

One per domain (including each dev domain). The General Integration guide states: "If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain."

What crawler should I start with?

Screaming Frog SEO Spider (free tier) covers most small sites. For JavaScript-heavy SPAs, use its headless Chrome mode or a Playwright script.

Can I share the dev domain with teammates?

Yes — add the same /etc/hosts entry on each machine, or run a local DNS server (dnsmasq, AdGuard Home) that resolves *.test to the Docker host IP.

What if SEATEXT doesn't show my dev domain after 10 minutes?

Check the browser console for Content Security Policy blocks, verify the snippet matches the account's domain exactly, then contact SEATEXT support (General Integration).

Next steps

Spin up the stack, map a .test domain, run your first crawl, then layer in SEATEXT or other personalization tools. Treat the local environment as a disposable replica — destroy and recreate it whenever the production infra changes.

If SeaText AI is not connected, the AI features will not work, but your site will function normally; you just won't get AI-powered assistance. The SeaText JavaScript snippet loads on your pages but remains inert until you complete the activation steps — visiting your site, staying for at least 40 seconds, and waiting up to 10 minutes for the dashboard to show your website name next to the SeaText logo. Until that handshake finishes, none of the 20+ autonomous agents (CRO optimizer, Google Ads landing page rewriter, translation engine, bot protection, A/B testing, personalization, etc.) can read visitor context, rewrite copy, or report results.

How the Connection Handshake Works

SeaText uses a lightweight JavaScript snippet that you paste into your site's <head> (or via a tag manager). The script does not modify your DOM until it receives an activation signal from the SeaText dashboard. According to the integration guide, you must "visit or refresh your website several times and stay on your page for at least 40 seconds — this will activate the AI and link it to your account." After that, you wait "at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page." If the name does not appear after 10 minutes, the documentation advises contacting support immediately because it "could indicate an issue during the installation on your platform." [S1]

What "Connected" Actually Means

A connected state means three things have happened: (1) the snippet loads without console errors, (2) the SeaText backend has recorded at least one valid session from your domain, and (3) the dashboard shows your domain name next to the logo. Each SeaText account is tied to a single primary URL. If you run multiple domains — for example, a staging environment and a production site — you need a separate account for each. Development URLs such as localhost are restricted for security reasons, and dynamic development domains may not function properly because SeaText "might be unable to reliably associate traffic with your account." [S1]

Consequences of Staying Disconnected

• No real-time content rewriting. The Google Ads Landing Page Agent, Visitor Source Rewrite Agent, and AI Personalization Agent all require an active connection to swap headlines, offers, and CTAs per visitor intent. Without connection, every visitor sees the static original page. [S2][S3][S4]
• No translation or localization. The Website Translation Agent translates pages into 125 languages on the fly. Disconnected means zero multilingual reach. [S2][S3]
• No bot detection or ad-spend recovery. The Bot Protection Agent identifies invalid clicks and builds refund-ready reports for Google, Meta, TikTok, and Reddit. If disconnected, you pay for every bot click. [S2][S3][S6]
• No autonomous A/B testing or CRO. The AI CRO Reading Analysis Agent and AI A/B Testing Agent generate variants, measure reading telemetry, and scale winners. They stay dormant without a live link. [S3][S6]
• No ChatGPT brand visibility shaping. The ChatGPT Brand Visibility Agent structures facts so AI assistants recommend your brand. Disconnected = no influence on LLM answers. [S3][S6]
• No proactive webchat. The Free Website Chat Agent converts visitors 24/7. It only loads when the account is active. [S3][S5]

Your core website — HTML, CSS, JavaScript, forms, analytics, checkout — continues to work exactly as before. SeaText does not block rendering, redirect users, or inject errors when inactive.

Common Reasons the Connection Fails

1. Snippet placed in the wrong location. The script must load on every page you want optimized. If it's only on the homepage, subpages stay disconnected.
2. Content Security Policy (CSP) blocks the script. A strict CSP without connect-src and script-src allowances for SeaText domains prevents the handshake.
3. Ad blockers or privacy extensions strip the snippet. Some visitors never trigger activation because their browser blocks third-party scripts.
4. Using a restricted development URL. localhost, 127.0.0.1, or ephemeral preview domains (e.g., Vercel preview deployments) cannot reliably associate traffic with your account. [S1]
5. Multiple domains on one account. Each domain needs its own SeaText account. Sharing an account across domains breaks the association. [S1]
6. Not waiting long enough. The dashboard updates asynchronously. The guide explicitly says wait 5–10 minutes after the 40-second visit before assuming failure. [S1]

Step-by-Step Verification Checklist

1. Open your site in an incognito window (bypasses most extensions).
2. Open DevTools → Console. Confirm no red errors referencing seatext or the snippet URL.
3. Open DevTools → Network. Filter for "seatext." You should see the snippet load (usually a small JS file) and subsequent XHR/WebSocket calls to SeaText endpoints.
4. Stay on the page for at least 45 seconds. Scroll, click, simulate reading.
5. Log into the SeaText dashboard. Check the top header: your domain name should appear next to the SeaText logo within 5–10 minutes.
6. If absent after 10 minutes, contact SeaText support with your account email and domain. [S1]

Limitations and Exceptions

• WP Engine and similar managed hosts. They often strip inline scripts. SeaText provides a dedicated WP Engine plugin to inject custom JavaScript. You must install and activate it across all pages. [S1]
• Single-page applications (SPAs). If your router swaps content without full page loads, the snippet may not re-initialize. SeaText's SPA integration guide (not in this source pack) covers history.pushState listeners.
• Server-side rendering (SSR) with hydration. The snippet must run in the browser after hydration. Placing it in a <script> tag that executes on the server does nothing.
• GDPR/CCPA consent banners. If you gate third-party scripts behind consent, SeaText only activates for visitors who accept. This is expected behavior, not a bug.
• No retroactive data. Connection starts collecting from the moment of activation. Past traffic is not re-processed.

Key Facts

Frequently Asked Questions

Will my site slow down if I install the snippet but don't activate?

No. The snippet is ~2 KB gzipped and executes a passive listener. It does not rewrite DOM, make heavy network calls, or block rendering until the dashboard signals activation.

Can I test SeaText on a staging domain before production?

Only if the staging domain is a real, stable URL (e.g., staging.example.com) and you create a separate SeaText account for it. Ephemeral preview URLs and localhost will not work. [S1]

What if I see the domain in the dashboard but agents still show "inactive"?

Connection and activation are separate. After the domain appears, you must go to the Main AI Hub and toggle each agent on. The CRO Optimizer (Agent #01) is active by default; others require manual activation. [S2][S3]

Does SeaText work behind a login or paywall?

Yes, provided the snippet loads on those authenticated pages and the visitor session meets the 40-second threshold. The AI reads the rendered DOM after login.

Can I pause SeaText without removing the snippet?

Yes. In the dashboard, turn off individual agents or disable the account. The snippet remains but stays inert — same as a disconnected state.

What happens if I cancel my subscription but leave the snippet?

The snippet will fail to authenticate, remain inert, and have zero effect on your site. Clean removal is still recommended for performance hygiene.

How do I know which agent caused a conversion lift?

The dashboard reports conversions by page, keyword, and variant. Each agent's contribution is attributed in the reporting view. [S2][S4][S6]

If Seatext is not properly activated on Tilda, you will usually see one of three signs: the live chat widget never appears on your pages, your Seatext dashboard shows no visitor sessions, or your browser console shows script errors. Each sign points to a different cause, and the fix depends on whether the JavaScript was placed in the site-wide HEAD field, inside a T123 block on a single page, or not published yet.

Activation is a two-step process on Tilda. First, the Seatext JavaScript snippet must be pasted into the correct location. Second, the page must be published and visited at least once for at least 40 seconds so the AI can link the visit to your account. Skipping either step is the most common reason activation fails.

Quick diagnostic: which sign are you seeing?

Start with the symptom you can observe directly. The table below maps each visible sign to the most likely cause and the first thing to check.

Sign 1: The chat widget never appears on your pages

This is the most common activation failure. The script is either missing from the page, sitting in the wrong field, or blocked before it can run.

Check the site-wide HEAD field

Open your Tilda dashboard and go to Site Settings. Look for the field labeled "Edit code inside HEAD tag." The Seatext JavaScript snippet must be pasted there if you want it to load on every page. If you pasted it somewhere else, such as the body or a single block, it will not run site-wide.

Check that you actually published

Tilda separates editing from publishing. Saving a change in Site Settings does not push it live. You must click Publish for the new HEAD code to reach your visitors. Open your live site in a private browser window and view the page source. Search for "seatext." If the snippet is not in the source, the publish step was skipped.

Check for script blockers

Browser extensions, privacy filters, and some CDN firewalls can block third-party scripts. Test from a clean browser profile with no extensions. If the widget appears there but not in your normal browser, the issue is local blocking, not activation.

Sign 2: The widget appears on some pages but not others

This sign almost always means the script was placed inside a T123 HTML block on specific pages instead of in the site-wide HEAD field. T123 is Tilda's block for embedded HTML, and it only loads on the page where it was added.

How to confirm

Open the page that is missing the widget. Click the plus icon to add a block and look for T123. If T123 is not present on that page, the script was never added there. If T123 is present but the widget still does not load, open the block, click Content, and confirm the Seatext snippet is still inside the HTML editor.

How to fix

You have two clean options. The first is to move the script to Site Settings → Edit code inside HEAD tag so it loads everywhere. The second is to add a T123 block with the snippet to each page that needs it. The site-wide HEAD approach is simpler to maintain and is the recommended path in the Seatext Tilda integration guide.

Sign 3: The dashboard shows no visitor data

If the widget is visible on your pages but the Seatext dashboard stays empty, the script is running but the visit has not been registered. There are three usual reasons.

The page was not published after the script was added

Editing a page in Tilda does not make changes live. Click Publish on every page that should carry the script, then reload the live URL.

The visit was too short

Seatext needs a real session to link a visit to your account. Open the live page yourself and stay on it for at least 40 seconds. Refresh once or twice during that window. A bounce under 40 seconds will not register.

The domain in your Seatext account does not match the live URL

Each Seatext account is tied to one primary URL. If your account was created for www.example.com but you are testing on example.com, or on a staging subdomain, the visit will not attach to the account. Use the exact domain registered in Seatext, and avoid localhost or dynamic development URLs, which are restricted for security reasons.

Sign 4: Console errors when you load the page

Open your browser developer tools, switch to the Console tab, and reload the page. Errors related to Seatext usually fall into three buckets.

• 404 on the Seatext script file: the snippet was copied incompletely, or the account ID inside it is wrong. Re-copy the snippet from your Seatext dashboard.
• Blocked by Content Security Policy: Tilda's default settings allow third-party scripts, but a custom CSP can block them. Add seatext.com to your allowed script sources.
• Mixed content warning: the page is served over HTTPS but the script URL is HTTP. Re-copy the snippet, which should always start with https://.

Sign 5: The website name never shows next to the Seatext logo

After you install the script and visit the page, Seatext tells you to wait at least five minutes until your website name appears next to the Seatext logo at the top of the dashboard. If that never happens, the link between your account and the live domain has not formed.

The usual cause is a domain mismatch. Confirm the URL in your browser bar matches the primary domain on file in your Seatext account, character for character, including the protocol. If you run multiple environments, such as a staging site and a production site, each one needs its own Seatext account because each account is linked to a single primary URL.

Step-by-step activation check for Tilda

Run through this sequence in order. It mirrors the official Seatext Tilda integration steps and adds the checks that catch the most common activation failures.

1. Log in to Seatext and copy the JavaScript snippet shown in the integration section.
2. In Tilda, open Site Settings and paste the snippet into the field labeled "Edit code inside HEAD tag."
3. Save the settings, then click Publish at the top of the Tilda dashboard.
4. Open your live site in a new private browser window.
5. Stay on the page for at least 40 seconds and refresh once.
6. Return to Seatext and wait up to five minutes for your website name to appear next to the Seatext logo.
7. Open the Seatext dashboard and confirm at least one visitor session is recorded.

If you only want the script on a single page instead of the whole site, replace step 2 with: open that page, add a T123 block, choose Other, click Content, paste the snippet, save, and publish.

Common mistakes that look like activation failures

• Pasting into the body instead of the HEAD. Some Tilda fields look similar. The HEAD field is the only one that loads before page content renders.
• Forgetting to publish. Tilda keeps a draft and a live version. The script only runs on the live version.
• Testing on localhost. Seatext restricts development URLs for security reasons, so the script will not link to your account from a local server.
• Using one account for two domains. Each domain needs its own Seatext account.
• Checking the dashboard too early. Visitor data can take a few minutes to appear after the first qualifying visit.

Limitations of this diagnostic

This guide covers activation issues that originate on the Tilda side or in the basic Seatext setup. It does not cover deeper problems such as conflicts with other third-party scripts, custom Tilda Zero Block code that strips injected scripts, or server-side caching layers that serve stale HTML. If the steps above do not resolve the issue, the next move is to view the live page source and confirm the Seatext snippet is present, then contact Seatext support with a screenshot of the console.

Key facts about Seatext on Tilda

Frequently asked questions

How long does Seatext take to activate on Tilda?

After you publish the page with the script, visit it and stay for at least 40 seconds. Your website name should appear next to the Seatext logo within about five minutes. If it does not, the domain in your account likely does not match the URL you visited.

Can I install Seatext on just one Tilda page?

Yes. Add a T123 block to that page, choose Other, click Content, paste the Seatext snippet, save, and publish. The script will only run on pages that contain the T123 block.

Why does the widget show in my browser but not in the dashboard?

The script is running, but the visit has not been linked to your account. Confirm the live URL matches the primary domain on your Seatext account, then refresh the page and stay for at least 40 seconds.

Do I need a separate Seatext account for my staging site?

Yes. Each Seatext account is linked to a single primary URL. If you want Seatext on both a staging domain and a production domain, create one account for each.

Will ad blockers prevent Seatext from activating?

They can. If the widget never appears in your normal browser but does appear in a clean browser profile with no extensions, the issue is local blocking, not activation. Ask visitors to allowlist your domain or test from a different browser.

What should I do if the console shows a Seatext error?

Re-copy the snippet from your Seatext dashboard to rule out a partial paste. If the error is a Content Security Policy block, add seatext.com to your allowed script sources. If the error is mixed content, confirm the snippet URL starts with https://.

You can translate a WordPress site without changing its permalinks. Use a translation tool that keeps the original page, post, or product URL as the permanent address, and stores translated text in a separate language version. The original permalink stays exactly where it is.

The direct answer: use a translation plugin or agent that stores translations in separate database tables or custom fields, and configure it to keep the original slug structure. Do not create translated pages by copying a post and renaming it. That is the fast route to broken links and lost SEO.

What “without changing permalinks” really means

A permalink is the permanent URL of a piece of content. On WordPress, it usually looks like yoursite.com/about or yoursite.com/rent-house-this-week. When you “translate without changing permalinks,” you keep those addresses the same for the original content.

Translated versions can still get their own URL. For example, yoursite.com/about can stay English while yoursite.com/es/about serves Spanish. The original permalink has not changed. The translated page is an additional address.

Some people mean something stricter: one URL, and the page language changes based on the visitor. That is possible with language detection, but it has real SEO trade-offs. Search engines generally need distinct URLs to find and rank each language version.

Before you start: prerequisites

• WordPress admin access. You need to install plugins and change settings.
• A recent backup. Back up files and the database before adding translation software.
• A URL strategy. Decide whether translated versions will live in subdirectories, subdomains, or the same URL.
• A translation tool that supports your choice. Some plugins want to create new pages with new slugs. That is the one to avoid.
• Your SEO plugin. Know how Yoast, Rank Math, or another SEO tool handles alternate language links.

How to translate WordPress without changing permalinks: 7 steps

This process assumes a normal WordPress site with posts, pages, and maybe WooCommerce products.

1. Back up your site. Export the database and download the files. Permalink issues are easy to fix when you have a restore point.
2. Choose the URL mode. For most sites, use a subdirectory: the English URL stays at /rent-house-this-week, and the translated version appears at /es/rent-house-this-week. This keeps the original permalink and gives search engines a separate address for each language.
3. Install a translation plugin or agent. Look for one that integrates with WordPress and does not create separate pages for every translation. If you use SEATEXT, the translation agent connects to WordPress and activates on your site.
4. Set your source language and target languages. SEATEXT, for example, supports up to 125 languages.
5. Turn off slug rewriting in the translation settings. Some plugins offer “create a new page for each translation.” That is the setting that changes permalinks. Use the plugin’s built-in translation fields instead.
6. Translate your content. With an automatic translation tool, new pages, posts, products, and updates are handled in the background. You do not manually rebuild slugs.
7. Verify the result. Open your original URLs and confirm they return 200. Open a translated URL and check the language. Then inspect the HTML for hreflang tags.

Hypothetical example

Imagine a real estate site with a page at yoursite.com/rent-house-this-week. In the subdirectory setup, the German version becomes yoursite.com/de/rent-house-this-week. The English address stays exactly the same. No permalink changed, no old link broke, and Google can see both versions.

Common mistakes that change permalinks

• Duplicating a page and renaming it. If you create /about-french by copying /about, you now have a new slug and a competing page.
• Choosing “different slugs per language” in a plugin. Some translation plugins ask for a translated slug. Leave that empty or use the language code added automatically.
• Importing translations into a fresh WordPress install. Moving to frenchsite.com means all old URLs change unless you set up redirects.
• Forgetting to update internal links. Translated pages may still link to, or create, old URLs.

Translation methods compared: how URLs behave

Choose subdirectories if you want the cleanest way to keep original permalinks and rank in each language. Choose same-URL detection only if your priority is that no URL ever changes and you can accept the SEO limits. Choose an automatic translation agent if you publish new posts or products regularly and want the translation to happen in the background. For most site owners, the subdirectory approach with automatic translation is the practical middle ground.

Key facts: automatic WordPress translation

These facts come from SEATEXT’s WordPress translation page. They describe how an automatic agent works; other plugins will have different settings and limits.

Limitations and when this advice does not apply

• Machine translation is not perfect. Review legal, financial, medical, or highly technical pages before publishing them.
• Custom post types and page builders can be missed. A translation plugin covers standard fields first. Check custom fields, theme options, and builder content separately.
• Your site may already have a locale in the URL. If you already use /en/ and /fr/ as permanent folders, this process applies to new content, not a retrofit.
• Separate catalogs need more than translation. If you sell different products or prices by country, a single translated WordPress site is not the right answer.
• Translation plugins can slow a site. Some site owners report performance issues. Test with caching and compare before and after activation.

Frequently asked questions

Will adding a translation plugin change my current URLs?

Not if you use the right settings. The original permalink stays, and translated versions get their own URL, usually with a language code. If the plugin asks for a new slug, leave it alone.

Do I need separate URLs for each language?

For SEO, yes. Google needs distinct URLs to apply hreflang and index each language. Same-URL language detection is possible but weaker for organic search.

Can I translate WooCommerce products without changing product permalinks?

Yes. A translation agent like SEATEXT handles WordPress products and updates automatically. Your existing product URL remains the base URL for that product.

How do I check that Google still sees my original permalinks?

Open each important URL in an incognito window and confirm it returns a normal page. Then check your site’s HTML for hreflang tags. Google Search Console should show no sudden 404 jumps.

What should I do if a translated page returns a 404?

Flush WordPress permalinks by visiting Settings - Permalinks and clicking Save. Then re-check the translation URL. If the 404 remains, the plugin or server rule for the language directory is missing.

Is there a free way to translate WordPress automatically?

SEATEXT describes 100% free website translation to 125 languages, with no page caps. You still need to review key translations for quality before they represent your brand.

After you copy the SEATEXT AI integration code, paste it into your website's HTML. Then verify that SEATEXT sees your site name, and activate the agents you want from the Main AI Hub. This page walks you through the exact order.

The code itself won't change anything until it runs on your live domain and links to your SEATEXT account. Treat this as a five-step checklist: paste, check domain, activate, confirm, and turn on the agents.

Prerequisites before you paste

Make sure you have these ready before you start:

• A SEATEXT AI account. You need one before you can install the script.
• A real, registered domain. Localhost and dynamic development domains are restricted.
• Access to your website's HTML or custom code section.
• If you use WPEngine, install the WP Engine plugin that lets you add custom JavaScript to your pages.

Why these matter: the script ties to a single account and a single primary URL. Without an account the snippet has no backend to call. Without a valid domain the activation handshake fails.

1. Paste the code into your website

Put the copied JavaScript into the HTML of the pages you want SEATEXT to work on. On most platforms, that means a custom code or scripts area in your CMS. If you use WPEngine, install the WP Engine plugin that enables you to add custom JavaScript code, then apply it across all your pages.

Place the snippet in the <head> or just before the closing </body> tag. Both positions work; the head loads earlier, the body ensures the DOM is ready. Choose the method your CMS recommends.

If you manage multiple templates, add the snippet to the global layout so every page inherits it. You can later restrict which pages run agents in the Main AI Hub.

2. Check your domain and account setup

SEATEXT links one account to one primary URL. If you want to use it on a second domain, you need a separate account. Development URLs such as localhost are blocked. Use a real, registered domain. If you have a development domain that changes dynamically, it may not work because SEATEXT needs to associate traffic with your account.

Decision criteria: each brand, sub‑brand, or regional site that needs independent reporting gets its own account. Subdomains (e.g., blog.example.com) count as the same primary URL if they share the same root domain.

3. Activate the script by visiting your page

After the code is live, open your site and refresh it several times. Stay on the page for at least 40 seconds. This triggers SEATEXT to link the website to your account. Skipping this step is a common reason the integration looks installed but never activates.

Mechanics: the script sends a beacon on page load. The 40‑second dwell ensures the beacon fires and the backend registers a valid session. Short visits or bounces may not register.

4. Wait for your website name to appear

Wait at least five minutes after activation. Then look at the top of the SEATEXT dashboard for your website name next to the SEATEXT logo. That tells you the connection is ready. If the name doesn't show after ten minutes, contact SEATEXT support.

Why the delay: the backend processes the beacon, matches it to your account, and provisions the agent runtime. Five minutes is typical; ten minutes covers edge cases like CDN propagation.

5. Activate agents in the Main AI Hub

Go to the Main AI Hub and activate the AI agents you need on the pages you choose. Click Configuration to adjust parameters. This is where you choose which parts of the site get rewritten, translated, or optimized.

Agents available include: CRO Optimizer, Google Ads Landing Page Agent, Website Translation Agent (125 languages), Bot Protection Agent, AI A/B Testing Agent, and more. Each agent can be toggled per URL pattern.

6. Review and edit variants (optional)

SEATEXT creates an initial round of automatic translations and variants. If you want to check them, log in, open Variants Edit in the left panel, pick the URL and language, then review, create, or manually edit translations.

This step is optional but recommended for brand‑sensitive copy. You can approve, reject, or rewrite any variant before it goes live.

What the integration code does

Your JavaScript snippet is the bridge between your website and SEATEXT. Until you activate it, it stays inert and doesn't modify your content. After activation, it lets SEATEXT rewrite headlines, offers, and calls to action, translate pages, and run other agents. You control this in the Main AI Hub.

The script loads a lightweight runtime that communicates with SEATEXT's edge network. It reads page DOM, sends context to the AI, and applies returned changes without full page reloads.

Key facts

These facts come from SEATEXT's General Integration page.

Limitations and when this advice doesn't apply

• If you don't yet have a SEATEXT account, create one first. The script requires an account.
• If you want to use SEATEXT on multiple websites, create one account for each website. Do not reuse the same code on different domains with one account.
• If you're testing on localhost or a dynamic development domain, integration may fail. Use a valid real domain.
• If you use WPEngine, the generic paste step won't work until you install the WP Engine plugin that adds custom JavaScript to your pages.
• If you copied the code but haven't pasted it yet, go back to the General Integration page and complete the install before trying to activate.

Troubleshooting common issues

If the website name never appears, check that the snippet is actually loading. Open browser dev tools, look at the Network tab, and filter for the SEATEXT domain. A 200 response means the script loaded.

If the script loads but activation fails, verify you stayed on the page for 40 seconds. Ad blockers or strict CSP headers can block the beacon. Temporarily disable them for a test visit.

For WPEngine sites, ensure the plugin is active and the snippet is applied to all pages. Clear server‑side cache after saving.

Best practices for multi‑domain setups

Create a separate SEATEXT account for each primary domain. Use a consistent naming convention (e.g., brand‑com, brand‑de) so you can identify them in the dashboard.

If you have a staging environment that uses a real domain (staging.example.com), treat it as a separate primary URL and create a dedicated account. This keeps test data out of production reports.

Understanding the Main AI Hub agents

The Main AI Hub lists all available agents. Each agent has a Configuration button that opens parameters such as target URLs, language selection, and aggressiveness level.

Start with the CRO Optimizer and Website Translation Agent. They provide immediate visible changes. Enable Bot Protection Agent if you run paid campaigns and want refund evidence.

Next steps after activation

Monitor the dashboard for the first 24 hours. Check the Variants Edit panel to see generated translations. Review conversion lift reports in the Analytics section.

Schedule a weekly review to approve new variants, adjust agent parameters, and add new URL patterns as you expand.

Frequently asked questions

Do I need to paste the code on every page?

For WPEngine, you apply the plugin across all pages. For the script itself, add it to your global site code so SEATEXT can work on the pages you choose later in the Main AI Hub.

What happens if I don't stay for 40 seconds?

SEATEXT may not link the visit to your account. You can visit again, refresh several times, and stay longer to activate it.

Why don't I see my website name after five minutes?

Wait up to 10 minutes. If it still doesn't appear, contact SEATEXT support because the installation may have failed.

Can I use the same account on a dev and a production domain?

No. Each SEATEXT AI account is linked to a single primary URL. Create separate accounts for each domain.

Is the AI active as soon as I paste the code?

No. It remains inert until activated. You activate it by visiting the page for at least 40 seconds and then turning on agents in the Main AI Hub.

What about localhost?

It is restricted for security reasons. Use a valid real domain.

Where do I edit the translations?

Log in to your SEATEXT account, navigate to Variants Edit in the left panel, and select the URL and language you want to edit.

Running a WordPress site in 125 languages can feel like a constant maintenance problem. Every edit in the default language affects every language version. A price change, a typo fix, or a new paragraph can multiply into hours of manual work. SeaText turns that into an automatic workflow. It sees your WordPress content, detects changes, and updates all 125 language versions. You can stay in control when a human review is needed.

If you want fast updates, the workflow matters more than the number of languages. Old translations can hurt sales. Missing updates can confuse customers. SeaText helps you avoid both by translating new content in the background and reusing approved translations.

How SeaText Handles Change Detection

SeaText keeps an eye on your WordPress content. It sees new pages, posts, products, and headlines. It also sees edits to existing content. You do not need to build a custom integration. Activate the plugin once, and the translation workflow runs by itself.

SeaText compares the updated page with the previous version. It does not translate the entire page again. Only the parts that changed get translated. Unchanged sections stay exactly as they were. This keeps the work small. It also protects translations that you already approved.

This approach works the same for new content and updates. Publish a new product, and SeaText translates it. Edit a headline, and SeaText updates that headline in every language. The rest of the page stays untouched.

Why does this matter? Because a scale of 125 languages makes full-page retranslation wasteful. A one-word change should not create 125 full page reviews. SeaText turns that one-word change into one small translation task for each language.

The Update Workflow Step by Step

Here is what happens after an update.

1. Edit in your default language. Use the normal WordPress editor. Use Gutenberg, a compatible page builder, or the product screen. The writing process stays the same.
2. SeaText notices the change. New content and edited content are detected automatically. There is no sync button to press.
3. SeaText compares versions. It looks at the updated content and the previous translated version. It finds what changed and what stayed the same.
4. Changed parts are translated. Only those parts go through translation. The rest of the translation remains as it was.
5. Updates are prepared for all 125 languages. SeaText applies the new translation to each active language version.
6. Review if you enabled it. When review is on, the new translation waits in an approval queue. You see the old text and the new text side by side.
7. Publish. Approved changes go live. Languages without review go live automatically.

The workflow runs for every supported content type. It does not slow down your editing. It also does not force your team to learn a new writing tool. You keep the WordPress editor you already use.

Review Gates and Quality Control

Automatic does not mean uncontrolled. SeaText gives you a place to review and edit translations. You choose which languages need human review. You can also choose which pages deserve extra attention.

For example, Spanish and French can publish automatically. Japanese or German can wait for approval. The choice depends on your team and your brand voice.

Use human review for pricing, legal, medical, or financial pages. Use automatic publishing for high-volume content that changes often. Use A/B tested translation for headlines and offers where small wording changes can change results.

Reviewers see the original text and the new translation together. They can accept the machine output, edit it, or reject it. This is useful when the translation must match local regulations or brand standards.

Managing 125 Languages at Scale

One dashboard gives you a complete view of all language versions. You can see which content is current and which content is waiting. You can find translations that need review.

Filters help you focus. Sort by language, content type, or status. Then act on the items that matter. You do not need to open 125 separate editors.

Frequent updates stay manageable. New products, posts, and headlines are translated automatically. Source changes are picked up the same way. The dashboard turns a large operation into a clear list.

Your team only steps in when human judgment adds value. Routine updates flow through the system. Complex or sensitive content can be paused for review.

Common Pitfalls and How to Avoid Them

• Treat the default language as the source of truth. Edit the original content first. Let SeaText push the update to the other languages. This keeps all versions aligned.
• Clear the review queue. A waiting translation is not live. Build a simple routine for languages where you chose human review.
• Confirm coverage for every content type. Pages, posts, products, and headlines are named in the source. If you use custom post types, check with the vendor.
• Plan for media separately. The source pack does not describe image or video translation. Keep that work outside SeaText or ask the vendor.
• Ask before changing your source language. A switch may affect existing translations. Confirm the impact with SeaText first.

When Manual Override Makes Sense

Most updates are routine. A new price or a corrected typo can run through automatic translation. Some updates need a human decision.

A slogan may not translate well. A legal disclaimer may need local wording. A market-specific offer may need a different message.

SeaText lets you edit a translation directly. You can adjust the text before it goes live. The edited version becomes the approved translation. Future source changes are still handled automatically.

Use A/B tested translation when you want proof about which message performs best. It is an advanced option for teams that want to optimize translated copy, not just translate it.

Key Facts

Limitations and Things to Confirm

• The source pack names four content types. Confirm other content types with the vendor.
• The source pack does not describe CSV or TMX import. Ask about migration options if needed.
• The source pack does not describe image or video translation. Keep localized media in your regular workflow.
• The one-minute activation assumes a standard WordPress setup. Your actual time may depend on your site.

FAQ

How fast do updates appear in all 125 languages?

SeaText works in the background. The source does not give a fixed speed. Auto-publish languages go live after translation. Review-gated languages go live after approval.

Can I review translations before they go live?

Yes. SeaText lets you review and edit translations. You can set review for the languages or pages that need it.

Which WordPress content types are translated?

Pages, posts, products, and headlines are named in the SeaText source. Confirm custom post types with the vendor.

Does SeaText replace WPML or Polylang?

The source does not say that SeaText replaces them. Ask the vendor how SeaText works with those plugins in your setup.

Can I import translations from CSV or TMX?

The source does not mention CSV or TMX import. Check with the SeaText team about migration options.

Is there a limit on pages or languages?

The SeaText source says there are no page limits and no language limits. The system translates into 125 languages.

Your SeaText integration is probably not stuck. It is waiting for activation. The JavaScript code you pasted into Tilda is designed to stay inactive until a visitor spends at least 40 seconds on the live site. This security step links the code to your SeaText account. If you skipped it, the dashboard has no way to confirm the code is working, so the integration looks like it is taking forever.

There is also a second built-in delay. After the activation visit, SeaText asks you to wait at least five minutes before the website name appears next to the SEATEXT logo. Checking too early makes it look like a failure when the system is simply processing the connection.

What Actually Causes the Long Wait

SeaText links a live website to a single account URL. The Tilda page must be publicly accessible, the code must be in the correct field, and the activation traffic must come from the right domain.

When one of these is missing, the system quietly waits for the right condition. It does not throw an error, and it does not change your site. The consequence is that none of the agents you selected can run. No translation, no CRO changes, and no bot detection will appear until the link is made.

The main exception is a mismatched domain. If you installed the code on a development URL or localhost, SeaText will block it for security reasons. No amount of waiting will fix that.

The Diagnostic Sequence: Work Through These Checks in Order

Follow this order. It moves from the most likely cause to the least likely.

1. Check that you have a SeaText account. Before you can install the script, you need a SEATEXT AI account. Without an account, the code snippet will never activate.
2. Copy the exact code from the SeaText dashboard. Old or partial snippets fail silently. Copy the current JavaScript code from the integration section of your account.
3. Confirm the code is in Tilda's HEAD tag field. Go to Site Settings, then More, then HTML code for the head section, then Edit code. Paste the code there so it loads on all pages.
4. Save and Publish the Tilda site. Saving the field is not enough. The code will not go live until you click Publish and make the changes available to visitors.
5. Do the 40-second activation visit. Open your public website. Refresh it several times. Stay on the page for at least 40 seconds. This activates the AI and links it to your account.
6. Wait five minutes. Return to the SeaText dashboard. Wait at least five minutes for your website name to appear next to the SEATEXT logo.
7. Verify the domain matches. Each SEATEXT AI account is linked to a single primary URL. If your Tilda site uses a custom domain, that exact domain must be the one stored on your account.

If you reach the end and the website name still does not appear, the problem is almost always a domain mismatch or a blocked development URL.

Why the 40-Second Activation Visit Is Non-Negotiable

The 40-second rule exists so SeaText can associate real visitor traffic with your account. The AI remains inert until activated, which protects your website content from changes during installation.

A quick refresh is not enough. SeaText needs to see several visits and a sustained session. This proves the page is live, reachable, and stable. Development URLs, such as localhost, are restricted for security reasons. Dynamic development domains may not function properly because SeaText cannot reliably associate that traffic with your account.

If you are testing on a preview domain that Tilda provides, switch to your real domain and repeat the visit. This single change resolves most long waits.

How the Tilda Code Injection Works

Tilda offers two places to insert custom code. The method you choose changes how the integration behaves.

Site-level installation (recommended)

This adds the SeaText script to every page on the site. Use it when you want sitewide translation, global CRO changes, or bot detection on all traffic. The official SeaText instructions use this path: Site Settings, then More, then HTML code for the head section, then Edit code.

Page-level installation

This adds the script to a single page using the T123 block. You choose a page, add a block, select Other, choose T123, and paste the code into the HTML editor. Use this only if you want SeaText on one landing page or product page.

The trade-off is coverage. Site-level code activates across the whole site. Page-level code means other pages will not be tracked or optimized. If you used page-level code and are waiting for sitewide changes, the dashboard will keep waiting because traffic on other pages never triggers the script.

Key Facts from the Official Integration Guide

Here are the facts that matter when you troubleshoot a delay. They come directly from the SeaText Tilda integration guide.

Common Mistakes That Create Long Waits

Limitations and Exceptions

SeaText restricts development URLs for security reasons. If your Tilda site is password-protected or only available through a staging link, the integration will not activate.

If you need SeaText on multiple domains, such as a dev domain and a production domain, you must create separate accounts. One account cannot serve two primary URLs.

The 40-second activation visit is a hard requirement. It cannot be skipped or replaced with a server-side ping.

If your Tilda site has heavy caching or a CDN that strips third-party scripts, the code may not load for visitors. SeaText relies on standard JavaScript delivery. If you have a service that blocks scripts, you need to allowlist the SeaText script.

This advice does not apply to sites that are already connected. Once the website name appears in the SeaText dashboard, further delays are usually related to specific agent actions, not the integration itself.

Frequently Asked Questions

How long does SeaText take to activate on Tilda?

The official process takes around five to six minutes in total. You need 40 seconds of active visiting, plus a five-minute dashboard wait. If you are waiting longer, one of the checks above is failing.

Can I use one SeaText account on two Tilda websites?

No. Each SEATEXT AI account is linked to a single primary URL. To use SeaText on several websites, create one account for each website.

Why is my Tilda site not showing up in the SeaText dashboard?

The dashboard updates after the activation visit and a five-minute wait. If the site still is not listed, check that you are looking at the same account that generated the code snippet and that the domain matches the live Tilda URL.

Does SeaText work on localhost or staging sites?

No. Development URLs, such as localhost, are restricted for security reasons. Dynamic development domains may not function properly.

What does the AI remains inert until activated mean?

It means the script sits on your Tilda site without making changes or sending data until a valid activation session occurs. This protects your website content during installation.

Do I need to publish my Tilda site after adding the SeaText code?

Yes. Tilda keeps changes in draft until you publish. The SeaText script will not appear on the live site until you save and publish.

What happens if I close my website before 40 seconds pass?

The activation session does not complete. SeaText will not link the site to your account. Return to the website, refresh it several times, and stay for the full 40 seconds.

What to Do Next

If the diagnostic sequence led you to a confirmed integration, the next step is to choose the right agents for your goals. SeaText deploys 20 autonomous AI agents that work in real time to increase conversion rate, recover wasted ad spend, translate content, and optimize visitor journeys.

If the integration still fails, do not paste the code multiple times. Duplicate scripts can interfere with the page. Instead, remove the code, confirm your domain matches the account, and run the sequence again from step one.

SeaText updates itself. The JavaScript snippet you paste into Tilda is served from SeaText's CDN, so new features and fixes reach your site without any extra work. You do not need to edit Tilda, re-paste code, or republish your site for a routine SeaText update.

The only times you need to change something in Tilda are: first-time installation, a change to your project ID or domain, and adding SeaText to a site that doesn't have the script yet. If your website name already appears in your SeaText account, your installation is current.

How SeaText Updates Work

SeaText installs as one piece of JavaScript in your site's HEAD section. That script connects your Tilda site to your SeaText account. Because the script is served by SeaText rather than stored as a fixed file inside Tilda, SeaText can update the script without you re-pasting anything. When a visitor loads your page, the browser fetches the current version.

This is different from a plugin or app that lives inside Tilda and needs a manual update click. From your side, installation is a one-time step. Routine updates happen in the background.

When You Actually Need to Touch Tilda

The automatic update covers SeaText's own script. It does not cover changes on your side. These cases need your attention:

• First install. Paste the snippet into the HEAD field for all pages, or use a T123 block for one page.
• Project ID or URL change. Each SeaText account is linked to a single primary URL. If your Tilda project moves to a new domain, get the snippet for the new project.
• A new website. Create one account per website, then paste that site's own snippet.
• Script removed during a redesign. Re-paste the snippet and publish.

If you skip these cases, the old script may point at the old URL, or the new site may have no script at all. You won't see an error on the page, so check the SeaText dashboard when something changes on your side.

Step by Step: Verify Your Current Install

Before changing anything, check the install you already have. This takes about two minutes.

1. Open your Tilda dashboard and go to Site Settings.
2. Click More → HTML code for the head section → Edit code.
3. Look for the SeaText JavaScript snippet and compare it with the one in your SeaText account.
4. Visit or refresh your site several times and stay for at least 40 seconds.
5. Wait about five minutes, then check the SeaText dashboard for your website name next to the SEATEXT logo.

If the snippet matches and your site name appears, you're done. There is nothing to update.

Step by Step: Replace the Script After a Project ID Change

Use this process when your Tilda project ID, domain, or primary URL has changed. Replacing the old script with the new one is the update.

1. Log in to your SeaText account and copy the JavaScript snippet shown in the integration section. If the change includes a new domain, create the account for that domain first — each account is linked to a single primary URL.
2. Go to Site Settings in Tilda.
3. Click More → HTML code for the head section → Edit code.
4. Select the old SeaText snippet in the field and replace it with the new one. For a single-page install, open the T123 block, click Content, and replace the code in the HTML editor.
5. Click Save and Close, then Publish.
6. Refresh your site several times and stay on the page for at least 40 seconds.
7. Wait about five minutes for your website name to appear in the SeaText dashboard.

Use the HEAD field for all pages. Use the T123 block only when you want SeaText on a particular page.

Key Facts: SeaText on Tilda

Scope: This guide covers the SeaText JavaScript snippet on Tilda sites. The install is one script in the document head, plus account and activation rules. If you're looking for Tilda's own site-publishing flow, that is separate.

Limitations and Edge Cases

The automatic-update model works because SeaText controls the script. It comes with limits worth knowing:

• One account per primary URL. You cannot reliably point one account at two Tilda sites. Create one account per website.
• Restricted development URLs. localhost is blocked, and dynamic development domains may not work because SeaText can't reliably associate traffic with your account.
• Activation is not instant. The script needs visits and dwell time before your site appears in the dashboard.
• No update button in Tilda. There is no "Update SeaText" button. You update by replacing the snippet when something on your side changes.
• Applies to Tilda sites. This advice covers Tilda's HEAD field and T123 block. Other site builders use different install steps.

Common Mistakes

Frequently Asked Questions

Do I have to update SeaText manually on Tilda?

No. Routine updates are automatic because the script is served by SeaText. You only re-paste the snippet when your project ID or domain changes.

Where do I paste a new SeaText script in Tilda?

Go to Site Settings, click More → HTML code for the head section → Edit code, replace the old snippet, save, and publish. For one page only, use a T123 block.

Why doesn't my site show up in my SeaText account?

The AI activates when visitors load the page. Visit or refresh the site several times, stay for at least 40 seconds, then wait about five minutes for the website name to appear.

Can I use the same SeaText account on my staging and production Tilda sites?

No. Each account is linked to a single primary URL. If you need SeaText on a development domain and a production domain, create separate accounts.

Does updating cost anything?

The integration guide doesn't list an update fee, and the change is just replacing a script. For current plan prices, check SeaText's pricing page.

What if I removed the script during a redesign?

Re-paste the snippet into the HEAD field, save, publish, and run the activation check above.

If you need the current snippet, the exact field names, or the activation steps in one place, the official SeaText Tilda integration page has everything.

Direct answer: activate by URL in the Main AI Hub

You activate SeaText AI on specific WordPress pages by installing the JavaScript snippet across your whole site, then choosing which pages to enable in the Main AI Hub. The script is inert until you activate an agent on a page, so installing it everywhere does not change your content by itself.

After installation, you go to the Main AI Hub, select the pages you want, and turn on the agents for those URLs. You can also click "Configuration" to adjust how the AI behaves on each page.

Prerequisites before you start

• A SeaText AI account. Each account is linked to one primary domain.
• Access to your WordPress admin area, or a way to add custom JavaScript.
• A valid, real domain. Development URLs such as localhost are restricted.

If you use WP Engine, download the WP Engine plugin that lets you add custom JavaScript to your pages. Install it and apply it across all your pages.

Step 1: Copy the SeaText JavaScript code

Log in to your SeaText account and find the JavaScript code in the General Integration section. Copy the full snippet. This is the same code for every page on your site.

Step 2: Add the snippet to WordPress site-wide

You need the snippet to load on every page, even pages where you will not activate the AI. This lets SeaText associate traffic with your account and gives you full control later.

Common ways to add it in WordPress:

• Use a header and footer script plugin, such as WPCode or Insert Headers and Footers.
• Add the code to your theme's header.php file before the closing tag. Use a child theme so updates do not remove it.
• If you use WP Engine, install their custom JavaScript plugin and paste the snippet there.

Do not add the snippet only to pages you plan to activate. SeaText needs to see the script across the site to connect your domain to your account.

Step 3: Visit your site to link the account

After adding the snippet, visit or refresh your website several times. Stay on a page for at least 40 seconds. This activates the AI and links it to your account.

Wait at least five minutes. Your website name should appear next to the SeaText logo at the top of the dashboard. If it does not appear after 10 minutes, contact SeaText support.

Step 4: Choose specific pages in the Main AI Hub

Open the Main AI Hub in your SeaText dashboard. You will see your website listed once the connection is confirmed. From there, you can activate the AI on your preferred pages.

Select the URLs where you want the AI to run. Leave other pages inactive. The AI remains inert on pages you do not enable, so your existing content stays untouched there.

Step 5: Configure the agents for each page

Click "Configuration" next to a page to adjust the AI parameters. You can choose which agents run on that page and how aggressive the changes should be. For example, you might enable the CRO Optimizer on a pricing page but leave a legal page inactive.

SeaText provides an initial round of automatic translations and variants for testing. You can review or edit them under "Variants Edit" in the left panel. Select the URL and language you want to edit.

Step 6: Verify activation on the right pages

Open a page where you activated an agent. Check that the AI version appears. Then open a page where you did not activate anything. It should show your original content with no AI changes.

If the AI is not active on a page you enabled, refresh the page and wait a few minutes. If it still does not work, confirm the snippet is present in the page source and that your domain is linked in the dashboard.

Common mistake: activating before the site is linked

A frequent error is trying to activate pages before the website name appears in the dashboard. If the domain is not linked, the Main AI Hub cannot apply your page selections. Complete the visit-and-wait step first, then activate pages.

How page-level activation works

SeaText uses a site-wide JavaScript snippet that stays dormant until you enable an agent for a specific URL. The Main AI Hub is the control layer. You pick the pages, and the AI only rewrites or translates content on those URLs.

This is different from a plugin that changes every page automatically. You keep full control over which pages get AI treatment.

Key facts

Limitations and when this advice does not apply

This process works for a standard WordPress site where you can add a site-wide script. If your WordPress setup blocks custom JavaScript, or if you cannot install a header/footer plugin, you may need help from a developer or your hosting provider.

SeaText does not support localhost or dynamic development domains reliably. Use a real domain for testing. If you need SeaText on multiple domains, create a separate account for each one.

Page-level activation is not the same as visitor-level targeting. You choose which pages get AI, not which visitors see it. For visitor-specific changes, you would need a different agent or configuration.

Terminology

• Main AI Hub: the dashboard area where you activate agents on specific pages.
• Inert: the script is present but does not change content until you activate it.
• Variants Edit: the panel where you review and edit AI-generated translations or versions.

FAQ

Do I need to install the SeaText plugin on every page?

No. You install the JavaScript snippet once, site-wide. Activation is handled per page in the Main AI Hub.

Can I activate SeaText AI on just one WordPress page?

Yes. Install the snippet across the site, then enable agents only for that one URL in the Main AI Hub.

Why is my website name not showing in the dashboard?

Visit or refresh your site several times and stay on a page for at least 40 seconds. Wait five minutes. If it still does not appear after 10 minutes, contact support.

Does the AI change pages I did not activate?

No. The AI remains inert on pages you do not enable. Only the URLs you select in the Main AI Hub are affected.

Can I use SeaText on a staging or local WordPress site?

Development URLs such as localhost are restricted. Use a valid, real domain. Dynamic development domains may not work reliably.

What if I use WP Engine?

Download the WP Engine plugin for custom JavaScript, install it, and apply the SeaText snippet across all your pages.

How do I edit what the AI wrote on a specific page?

Go to "Variants Edit" in the left panel, select the URL and language, and review or manually edit the translations and variants.