If SeaText AI is not active immediately after installation, that is partly by design. The script is installed in a secure, inactive state, and it only begins working after your page is visited long enough to link the site to your account and after you switch on the agents you need. The most common causes of delay are browser caching, script placement that misses some pages, an account/domain connection that has not finished, or agents that were never activated in the Main AI Hub.

Use the diagnostic sequence below. You should usually resolve this in a few checks, not by reinstalling everything from scratch.

What “not active” means with SeaText

SeaText AI does not rewrite your website the moment the JavaScript snippet is pasted. The official integration instructions describe the installation as secure and say the AI remains inert until activated. “Inert” is the key word: it means the code is present but not doing anything yet.

There are two separate stages. First, the script is installed on your site. Second, the account is connected and an agent is turned on for a specific page. If you skip the second stage, the script can be live and you will still see no effect. This division matters because it changes what you should check when something looks inactive.

Ignoring the activation step often leads to a false conclusion: you assume the tool is broken, when the site is actually waiting for the 40-second visit and the five-minute connection signal.

Run the diagnostic sequence in this order

Do not jump to reinstallation. Follow this order, because each step depends on the one before it.

1. Confirm your SeaText account exists. You need an account before you can install or activate the script. If you do not have one, create one first.
2. Confirm the JavaScript snippet is installed on the live page. Open the page in a private window, view the page source, and search for the SeaText snippet. On WordPress with WP Engine, install and apply the WP Engine custom JavaScript plugin across all pages.
3. Bypass cache. If the script is there but you still see old content, clear your browser cache, try incognito mode, or open the site on another device.
4. Trigger the activation visit. Visit or refresh your website several times and stay on the page for at least 40 seconds. This step activates the AI and links it to your account.
5. Wait five minutes. Look for your website name next to the SeaText logo at the top of the SeaText page. If it appears, the site is connected.
6. Activate agents in the Main AI Hub. Go to the Main AI Hub and activate the necessary AI on the pages you want. Open Configuration to adjust parameters.
7. Escalate only after 10 minutes. If the website name still has not appeared after 10 minutes, contact SeaText support. This usually points to a platform-level problem.

The order prevents you from testing agent behavior before the account and domain are connected.

Likely causes and their fixes

Use this section when the diagnostic sequence points to one specific cause.

1. The agent was never activated

This is the most common cause. The script is installed, but no agent is running. Fix: open the Main AI Hub and activate the agent for your preferred pages. Without that, SeaText has nothing to do.

2. The connection between your site and account has not completed

After adding the script, the AI needs a visit of at least 40 seconds to link with your account. Then you wait at least five minutes for the website name to appear. If you only pasted the code and never visited the page, the connection can remain unfinished. Fix: complete the 40-second visit, then refresh the SeaText dashboard.

3. Browser cache or a caching plugin is showing an old page

Even when the script is live, a cached page can hide it. This is especially true if your site uses page caching or if you are re-checking the same tab. Fix: hard refresh, use incognito mode, clear cache, or check from a different browser. Caching can delay how quickly you see the change without blocking the script itself.

4. Script placement is wrong or not site-wide

If the script is only on the page you tested, other pages will look inactive. On WP Engine, use the official plugin to add custom JavaScript across all pages. On a regular site, verify the snippet is present on the live page, not only in your editor.

5. Domain mismatch

Each SeaText account is linked to a single primary URL. If you are testing on a second domain with the same account, SeaText may not associate that traffic with your account. Fix: use the correct domain or create a separate account for each primary URL.

6. Development URLs

Localhost is restricted for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account. Fix: use a valid, real domain for installation and testing.

7. Account not created yet

You cannot install or activate successfully without an account. The integration instructions state clearly that you need a SeaText AI account before installing the script. Fix: create the account first, then install.

Activation checklist

If you prefer a table, here are the three symptoms users see most often and what to check first.

This table is a shortcut, not a replacement for the diagnostic order. If these checks do not fix it, go back to the full sequence.

Key facts about SeaText installation and activation

The following facts come from SeaText’s General Integration documentation.

Use this table when you are deciding whether the problem is installation, connection, or activation.

Limitations, exceptions, and when this advice does not apply

Some setup situations look like an activation delay but are actually restrictions. The integration guide specifically calls out a few.

Localhost and other development URLs. Development URLs such as localhost are restricted for security. If you test on localhost, SeaText may not activate. Use a valid, real domain.

Dynamic development domains. Dynamic domains, such as temporary preview URLs, may not function properly. The reason is that SeaText cannot reliably associate traffic with your account when the URL changes. This is different from a caching issue and will not be fixed by waiting.

Multiple domains. Each SeaText account is linked to a single primary URL. If you need SeaText on a development domain and a production domain, create separate accounts for each. Trying to use one account on both can make one site look inactive.

WP Engine. If your site is on WP Engine, add custom JavaScript through the WP Engine plugin and apply it across all pages. Installing the snippet in a place WP Engine does not recognize can lead to a partial installation.

This advice does not apply if the script is already connected and agents are active but the site still does not change. In that case, the question is no longer about activation; it is about agent configuration or page targeting.

Terminology: inert, activation, connection, variants

These terms keep appearing in the SeaText interface and in this guide.

• Inert: installed but not yet doing anything. SeaText says the AI remains inert until activated.
• Activation: the process that links the script to your account and switches on an agent. It requires the 40-second page visit and the Main AI Hub step.
• Connection status: shown by your website name appearing next to the SeaText logo at the top of the dashboard.
• Variants: the initial round of automatic translations and text variations SeaText provides for testing. You can review or edit them in Variants Edit.

Knowing these four terms helps you describe the problem precisely when you contact support.

Frequently asked questions

I installed the code, so why is the dashboard still empty?

The code insertion is only the first step. You need to visit or refresh the website several times and stay on the page for at least 40 seconds. Then wait at least five minutes for your website name to appear next to the SeaText logo.

Do I have to activate anything after adding the script?

Yes. Go to the Main AI Hub and activate the AI agents you need on your preferred pages. Without this step, the script remains inert.

Can I use one account on my staging and production sites?

No. Each SeaText AI account is linked to a single primary URL. If you need SeaText on more than one domain, create a separate account for each.

Why does my localhost site not activate?

Development URLs such as localhost are restricted for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account. Use a valid, real domain.

How long should I wait before contacting support?

Wait at least five minutes after the 40-second activation visit. If your website name still does not appear next to the SeaText logo after 10 minutes, contact support immediately, because that may indicate an installation problem on your platform.

What are variants?

Variants are the initial round of automatic translations and alternate text versions that SeaText creates for testing. You can review, create, or edit them in Variants Edit in your account.

Will clearing my browser cache make SeaText active?

Clearing cache will not activate the script by itself. It removes the possibility that you are looking at an old version of the page. The activation steps, including the 40-second visit and Main AI Hub activation, still need to happen.

If your internet disconnects during the 40-second activation countdown, the activation may pause or fail. You don't need to delete your account or reinstall the script from scratch. Restore your connection, then run the activation step again: visit or refresh your website several times and stay on the page for at least 40 seconds.

After that, wait at least five minutes. Your website name should appear next to the SEATEXT logo at the top of your SeaText page. If it doesn't appear after 10 minutes, contact support.

Why the 40-second visit matters

SeaText uses that visit as the signal that links your website to your account. You install the JavaScript code, create an account, then visit or refresh the site several times. Staying on the page for at least 40 seconds gives the script time to run and be recognized.

The 40-second activation countdown is really the window during which SeaText expects to see a real visit to your site. If your internet drops mid-visit, the communication between your browser and SeaText can be interrupted.

This matters because the rest of setup depends on it. Until the link is confirmed, you can't proceed to the Main AI Hub or activate AI on your preferred pages. The guide's next signal is your website name appearing next to the SEATEXT logo at the top of the page.

Diagnostic sequence: work through this order

If activation doesn't complete, run through these steps in order.

1. Confirm your connection is back. Open any other site, or check your router lights. If other pages load, your connection is restored.
2. Don't close the page if you don't have to. If your website tab or your SeaText tab is still open, leave it open. A short interruption may resolve itself.
3. Repeat the activation visit. Open your website again or refresh it. Do this several times, and stay at least 40 seconds each time.
4. Return to SeaText and wait. Wait at least five minutes. Then look for your website name next to the SEATEXT logo at the top of the page.
5. If 10 minutes pass, contact support. The guide names this step directly. Don't keep reinstalling the script; contact the support team.

This order separates a network hiccup from a setup problem. If your connection is stable and the website name still doesn't appear, the cause is probably not the internet drop.

Likely causes and how to tell them apart

The disconnect can come from different places, and each needs a different fix.

• A short Wi-Fi or router blip. Your connection returns quickly. Wait a minute, then visit your site again.
• A full internet outage. Other sites won't load. Wait until service is back, then rerun the activation visit.
• A browser or device issue. Your internet works, but the page didn't load fully. Refresh the page and stay on it.
• A cached page. The browser may show a saved copy that doesn't run the SeaText script. Try a hard refresh or a private window.
• An account or domain mismatch. Each SeaText account is linked to a single primary URL. If you're testing on a different domain, use the account created for that domain.
• A development domain restriction. localhost is restricted, and dynamic development domains may not work. This is not an internet problem; a stable connection won't fix it.

If your internet drops regularly, the root cause is your network, not the activation step. Fix the connection first, then repeat the 40-second visit.

Corrective actions: how to restart activation

Once your connection is stable, the process is the same as the first attempt.

1. Log in to your SeaText account.
2. Visit your website, or refresh the page.
3. Stay on the page for at least 40 seconds.
4. Repeat the visit or refresh several times. The guide says "several times", not once.
5. Switch back to the SeaText dashboard and wait at least five minutes.
6. Check for your website name next to the SEATEXT logo.

If the name appears, your site is connected. You can then go to the Main AI Hub, click "Configuration" to adjust AI parameters, and use "Variants Edit" to review or manually edit the first round of translations and variants.

If the name doesn't appear, don't start over multiple times. The guide says to contact support after 10 minutes.

What a successful activation looks like

Success is not marked by a message on your website. It's marked in your SeaText account: your website name appears next to the SEATEXT logo at the top of the page. That means the account and the domain are linked and ready for the next step.

If you don't see it yet, check the time. The guide asks you to wait at least five minutes.

If you're testing on a development site, also check the URL. The guide says development URLs like localhost are restricted and dynamic development domains may not function properly. A valid, real domain is the safer option.

What this advice does and doesn't cover

This advice covers the setup step described in the SeaText General Integration guide. It applies when the JavaScript code is installed and you're trying to link your site to your SeaText account.

It doesn't cover what happens after activation. Once your website name appears next to the logo, the guide treats that as the signal that your website is connected. From there, you can proceed to activating AI on your preferred pages.

It also doesn't apply if you haven't created an account, if the script isn't installed, or if your domain doesn't match the account. In those cases, no amount of waiting or refreshing will produce the logo signal.

Key facts about SeaText activation

Here are the setup facts from the SeaText integration guide.

Use this table as your checklist. If the script is installed, the account exists, the domain is valid, and you complete the 40-second visit, the remaining job is the wait and the logo check.

Frequently asked questions

How long do I need to stay on the page?

At least 40 seconds, and the guide says to visit or refresh several times. One quick load is not the activation visit.

How long do I wait before checking for the website name?

Wait at least five minutes after the visit. If the website name still isn't next to the SEATEXT logo after 10 minutes, contact support.

Can I activate SeaText using localhost?

No. The guide says development URLs, such as localhost, are restricted for security reasons. Use a valid, real domain. Dynamic development domains may not work either.

Do I need a separate account for each website?

Yes. Each SeaText account is linked to a single primary URL. If you use SeaText on several websites, create one account for each website.

What if the disconnect comes from my internet provider?

Wait for service to return, then run the activation visit again. If your provider is unstable, you may need to retry more than once until the page loads and stays connected for 40 seconds.

Where do I find SeaText pricing?

The General Integration guide and the SeaText homepage both include a "Click here for pricing" link. The source pack doesn't list a price, so check the current pricing page.

Leave the activation page? Go back and start the activation step again. The Seatext process does not guarantee that your progress is saved if you leave before the 40-second wait is finished. Your website may not link to your account, and the activation may stay incomplete.

Here is the short recovery path: return to the Seatext page where you added the code, confirm the JavaScript is still installed, visit or refresh your website several times, stay on the page for at least 40 seconds, then wait for your website name to appear next to the SEATEXT logo.

Symptoms: what you notice after leaving early

After an accidental exit, the most common symptom is silence. The Seatext dashboard does not show your website name at the top. You may not see an error message, because the activation simply did not finish.

• No website name next to the SEATEXT logo at the top of the page.
• No confirmation that the AI is linked to your account.
• No change on your site, because Seatext says the AI remains inert until it is activated.

If any of these symptoms appear, do not panic. The fix is usually a short retry, not a full reinstall.

Recovery steps: how to restart activation

1. Return to the Seatext dashboard or the General Integration guide in your Seatext account.
2. Check that the JavaScript code is still on your website. If you use WPEngine, make sure the WP Engine plugin is installed and applied across all pages.
3. Open your website in a new tab.
4. Visit or refresh the page several times.
5. Stay on the page for at least 40 seconds. Keep the tab active and visible.
6. Go back to the Seatext page.
7. Wait at least five minutes. Do not assume it failed during this wait.
8. Look for your website name next to the SEATEXT logo at the top of the page.
9. If the name does not appear after 10 minutes, contact Seatext support.

Example: You copied the code, opened your site, got pulled into a meeting, and closed the tab after about 20 seconds. When you return, the dashboard still shows no website name. In that case, refresh your site, stay for 40 seconds, and wait up to five minutes before checking again.

To avoid leaving by accident, do the activation when you can give the browser your full attention for a few minutes. Close extra tabs if that helps, and keep the activation tab in front.

Why this works: the 40-second activation step

The 40-second stay is not filler. It is the step that activates the AI and links it to your account. Seatext’s integration guide says to visit or refresh your website several times and stay on the page for at least 40 seconds to trigger the link.

That wait gives the page time to load and lets Seatext match the site to your account. Each Seatext account is linked to one primary URL, so the page visit is how Seatext knows which website belongs to which account.

The installation process is secure, and the AI stays inactive until this activation step is complete.

Diagnosis order: find out what went wrong

Before you repeat the whole install, check in this order:

1. Check the top of the Seatext page. If your website name is already next to the SEATEXT logo, activation worked and leaving early caused no problem.
2. Check how long you stayed. If you stayed less than 40 seconds, treat the short stay as the likely cause.
3. Check the installed script. Did you copy the full JavaScript code? Is it applied across all pages? WPEngine users need the WP Engine plugin for custom JavaScript.
4. Check your domain. Localhost is restricted. Dynamic development domains may not work. If your site is not on a valid real domain, the 40-second wait may never complete.
5. Check your account setup. If you tried to use one account for more than one website or domain, Seatext expects a separate account for each primary URL.

Use this order instead of guessing. It is faster to verify the simple causes first.

Likely causes and how to correct each

• You closed the tab before 40 seconds. Correct it by reopening the page and repeating the 40-second stay.
• You clicked a link inside Seatext. Use the back button or open the General Integration guide again, then revisit your site.
• The browser crashed. Reload the page and start the activation visit again.
• Your internet connection dropped. Reconnect, refresh your website, and stay for the full 40 seconds.
• The script was never installed on every page. Check your site’s code. On WPEngine, use the plugin and apply it across all pages.
• You used localhost or a dynamic development domain. These are restricted or unreliable. Use a valid, real domain.
• You expected one account to cover two domains. Seatext links one account to one primary URL, so create separate accounts for separate domains.

When you can skip the redo

You do not need to redo activation if your website name already appears next to the SEATEXT logo at the top of the page. That is the confirmation that your website is connected. If you left the page after the 40-second stay and later saw that name, the activation is complete.

You also do not need to keep refreshing all day. The guide says to wait at least five minutes, not to refresh repeatedly during that wait. If the name does not appear after 10 minutes, contact support instead of restarting again and again.

Key facts from the Seatext integration guide

Limitations and when this advice does not apply

This advice applies to SEATEXT AI activation, not to operating system activation locks, SIM activations, or expired account links. Other vendors have different recovery steps.

Within Seatext, the main exceptions are:

• No account yet. You need a SEATEXT AI account before installing the script.
• Localhost. No amount of waiting will activate the AI on a restricted development URL.
• Multiple domains. One account will not link to a second primary URL.
• WPEngine. Without the WP Engine plugin, the JavaScript may not run across your pages.
• Persistent failure. If the dashboard still shows nothing after 10 minutes, the guide says to contact support. There may be an installation issue on your platform.

Frequently asked questions

Will I lose my progress if I leave the activation page?

Probably, at least for the activation step. Seatext needs the page visit and the 40-second stay to activate the AI. The good news is that a retry takes only a short active moment, plus the wait for the confirmation.

How do I know the activation worked?

Your website name must appear next to the SEATEXT logo at the top of the Seatext page. Wait at least five minutes before you expect it.

Can I switch tabs while the 40-second wait runs?

Play it safe and keep the activation tab active and visible. The instruction says to stay on the page, and there is no official promise that background tab time counts.

What should I do if I still do not see my website name?

After 10 minutes, contact Seatext support. The guide says this could indicate an issue during installation on your platform.

Can I use one Seatext account for two websites?

No. Each SEATEXT AI account is linked to a single primary URL. Create a separate account for each domain.

Why will localhost not activate?

Development URLs such as localhost are restricted for security reasons. Use a valid, real domain instead.

Does this apply if the activation page belongs to another product?

No. This article covers SEATEXT AI. For Apple Activation Lock, SIM activations, or other account activation links, follow that product’s own support guidance.

To install SeaText AI on a static HTML site, copy the JavaScript snippet from your SeaText AI dashboard and paste it into your HTML file, ideally right before the closing </body> tag. The script is inert until you activate an agent, so it will not change your content during installation. After you paste it, refresh your site a few times and stay on a page for at least 40 seconds so SeaText can confirm the connection.

This guide walks through the exact steps for a plain HTML site, the prerequisites you need first, and how to verify the install worked before you turn anything on.

What you need before you start

SeaText AI ties each account to one primary domain, so get the basics in place before you touch any code.

• A SeaText AI account. If you do not have one, create it on the SeaText site first. The script will not work without a linked account.
• A real, public domain. Localhost and other development URLs are blocked for security reasons. If you only have a dev URL, plan to test on a staging domain that resolves publicly.
• Edit access to your HTML files. You need to open the file and paste code. A CMS that strips custom scripts will block the install, so check that first.
• A way to upload the change. FTP, SFTP, Git, or your hosting file manager all work. The change is one snippet, so it is small.

Step-by-step installation on a static HTML site

Follow these steps in order. Each one is small, but skipping ahead is the most common reason installs fail to register.

1. Log in to SeaText AI and copy the script. Open your dashboard and find the JavaScript snippet labeled for general integration. Keep the tab open so you can come back to it.
2. Open the HTML file you want to test with first. Start with your home page or your highest-traffic landing page. You can paste the snippet on every page later.
3. Paste the snippet just before </body>. Placing it at the end of the document lets the rest of the page load first. Do not wrap it in extra logic or load it with async="false" unless SeaText support tells you to.
4. Save and upload the file. Push the change to your live server. If you use a static site generator, rebuild and redeploy.
5. Visit your page in a normal browser window. Open the URL, refresh it two or three times, and stay on the page for at least 40 seconds. This dwell time is what links the script to your account.
6. Wait up to 10 minutes, then check the dashboard. Look at the top of the SeaText AI page. Your website name should appear next to the SeaText logo. If it does not show after 10 minutes, contact support, since the script may not have loaded.
7. Repeat on every other page. Once the first page is linked, paste the same snippet into the other HTML files you want SeaText to manage. One snippet per page is enough.

How to verify the install worked

Do not activate any agents until you see your domain in the dashboard. The verification step is what tells you the script is actually running.

• Check the dashboard header. Your domain name should sit next to the SeaText logo within about five minutes of your first visit.
• Open browser dev tools. On your page, open the Network tab and reload. Look for a request to the SeaText domain. If you see it, the script loaded.
• Check the console for errors. A blocked script, a content security policy, or a tag manager filter will show up here. Fix those before you move on.
• Try a second page. Paste the snippet on another HTML file, visit it, and confirm the dashboard still shows your domain. This catches copy-paste mistakes early.

Common mistakes on static HTML sites

Static sites look simple, but a few setup habits break the install. Watch for these.

• Pasting the snippet in the <head> instead of the body. It often still loads, but some tag managers strip head scripts. The end of the body is the safer spot.
• Testing on localhost. SeaText blocks development URLs for security. Use a real domain, even a cheap staging one.
• Leaving the page too fast. If you close the tab in under 40 seconds, the AI cannot link the visit to your account.
• Using one account for two domains. Each domain needs its own SeaText AI account. Sharing an account breaks the link.
• Forgetting to redeploy. With static hosts, saving the file is not enough. You have to push the build or upload the file for the change to go live.

What SeaText AI does after install

The script itself does nothing on its own. It waits for you to turn on an agent in the Main AI Hub. Once you do, SeaText can rewrite headlines, swap CTAs, translate pages, run A/B tests, and adapt copy to the visitor source. Until you activate an agent, your content stays exactly as you wrote it.

You can also edit variants by hand. Go to Variants Edit in the left panel, pick a URL and language, and review or change the translations SeaText generates. This is useful when you want to keep control over brand wording.

Key facts about the install

Limitations and when this advice does not apply

The general integration works on any site where you can paste raw HTML. A few cases need a different path.

• WPEngine hosting. WPEngine blocks custom JavaScript by default. You need the WP Engine plugin that allows custom scripts, then apply it across your pages.
• Strict content security policies. If your site sets a tight CSP, the script may be blocked. You will need to allow the SeaText domain in your policy.
• Tag managers that filter scripts. Some GTM setups strip unknown scripts. Whitelist SeaText or paste the snippet directly in HTML.
• Multiple domains. Each domain needs its own account. There is no way to run one account across two production URLs.

Frequently asked questions

Do I need to paste the snippet on every page?

Yes, if you want SeaText to manage that page. The script only runs on pages where it is present. Most static sites paste it into a shared footer template so every page picks it up at once.

Will the script slow my site down?

The snippet loads asynchronously, so it does not block your page from rendering. If you see a slowdown, check that you did not wrap it in a synchronous loader.

Can I test on a staging domain?

Yes, as long as the staging domain is a real, public URL. Localhost and other non-resolving hosts are blocked. Create a separate SeaText account for the staging domain so traffic stays clean.

How long until I can turn on an agent?

Once your domain name shows in the dashboard, you can activate agents right away. Most accounts confirm within five minutes of the first qualifying visit.

What if my domain does not appear in the dashboard?

Wait the full 10 minutes, then check that the snippet is in the live HTML and that you stayed on the page for at least 40 seconds. If it still does not show, contact SeaText support, since the script may not have loaded on your platform.

Does the script change my content before I activate an agent?

No. The script is inert until you turn on an agent in the Main AI Hub. Your content stays exactly as you wrote it during install and verification.

Can I edit the translations SeaText creates?

Yes. Open Variants Edit in the left panel, pick the URL and language, and edit the text by hand. This is the right place to lock in brand wording or fix a translation you do not like.

Hire a developer when you need custom language handling, SEO-specific URL structures, or large content volumes that plugins cannot manage without performance penalties. Plugins work for standard features with existing solutions; custom code is justified when the requirement is unique, business-critical, or exceeds plugin architecture limits.

Core Decision Framework: Plugin vs. Custom Development

The choice between a plugin and a developer comes down to three variables: uniqueness of the requirement, risk tolerance, and total cost of ownership over 12-24 months. A plugin solves a known problem for many sites. A developer solves your specific problem, which may not exist elsewhere.

Start by writing the requirement in one sentence. If you can find two reputable plugins that claim to do exactly that, a plugin is usually the faster, cheaper path. If the requirement involves custom data flows, non-standard integrations, or performance targets that plugins cannot guarantee, budget for development.

When Plugins Are the Right Choice

Plugins excel at commodity features: contact forms, SEO meta management, caching, backups, and standard content translation. The WordPress repository and commercial marketplaces have mature solutions with active maintenance, documentation, and community support.

• Standard functionality: Features that appear on thousands of sites with similar needs.
• Low customization: Configuration via settings panels covers your use case.
• Budget and timeline constraints: You need it working this week, not this quarter.
• Team capability: No in-house developer to maintain custom code.

For example, translating a WordPress site into multiple languages is a solved problem. SeaText AI translates every page, post, product, and update automatically into 125 languages without page or language caps, and new content is translated in the background. This type of plugin replaces a manual localization project entirely.

When Custom Development Is Justified

Custom code becomes necessary when the requirement falls outside plugin architecture or when the cost of plugin limitations exceeds development cost.

• Unique business logic: Pricing engines, configurators, or workflows specific to your operation.
• Performance-critical paths: High-traffic pages where plugin overhead adds unacceptable latency.
• SEO-specific URL structures: Custom routing, hreflang implementations, or multilingual URL patterns that plugins cannot generate.
• Large content volumes: Sites with 50,000+ posts where plugin database queries become bottlenecks.
• Non-standard integrations: Connecting to proprietary ERPs, CRMs, or APIs without existing plugin connectors.
• Compliance and security mandates: Data residency, encryption, or audit requirements that plugins cannot satisfy.

Cost and Maintenance Trade-offs

Calculate total cost of ownership: plugin subscription × years + developer hours for configuration/troubleshooting vs. development cost + annual maintenance retainer. At scale, custom development often breaks even within 18-24 months.

Performance and Scalability Considerations

Plugins add database queries, HTTP requests, and PHP execution on every page load. A well-coded plugin minimizes this, but 20 active plugins compound. Custom code executes only what you need.

For high-traffic sites (100k+ monthly visits), plugin overhead can increase server costs significantly. A custom solution tailored to your query patterns and caching strategy reduces infrastructure spend. SeaText AI, for instance, translates content in the background and serves translated pages without per-request translation overhead, keeping performance stable as content grows.

Security and Compliance Factors

Plugins expand your attack surface. Each plugin is a potential vulnerability vector. Custom code has fewer moving parts but requires secure coding practices.

• Data handling: If you process PII, payment data, or health information, a custom solution lets you control data flow and encryption end-to-end.
• Audit requirements: Some compliance frameworks (SOC2, HIPAA) require code review and change management that plugin vendors may not provide.
• Update cadence: Plugins update on vendor schedules. Custom code updates on your schedule.

Integration Complexity

Plugins integrate via WordPress hooks and REST API. This works for standard endpoints. Custom development is needed when:

• The external system uses GraphQL, gRPC, or proprietary protocols.
• Authentication requires mutual TLS, OAuth2 with custom scopes, or certificate-based auth.
• Data transformation logic is complex (nested objects, conditional mapping, real-time validation).
• You need transactional guarantees across WordPress and external systems.

SeaText AI integrates via a single script tag and handles translation detection, rendering, and SEO metadata automatically, avoiding complex integration work for multilingual sites.

Key Facts

Limitations: When This Advice Does Not Apply

• Prototypes and MVPs: Use plugins to validate demand before investing in custom code.
• Non-technical teams with no developer access: Plugins are the only viable option without external help.
• Short-term campaigns: Landing pages for 3-month promotions rarely justify custom development.
• Budget under $2,000: Custom development rarely delivers ROI at this level.

Terminology

• Plugin: Pre-packaged WordPress extension adding functionality via hooks and filters.
• Custom development: Code written specifically for your site, typically as a custom plugin, theme, or mu-plugin.
• Total cost of ownership (TCO): Sum of licensing, hosting, maintenance, and opportunity costs over a defined period.
• Technical debt: Future cost incurred by choosing a faster, limited solution now.
• Hook/filter: WordPress extension points allowing code to modify behavior without changing core files.

FAQ

How do I know if a plugin will handle my traffic volume?

Check the plugin's active install count, last update date, and support forum for performance complaints. Test on a staging site with your content volume and simulate load using tools like k6 or Loader.io. If response time degrades >20% under load, plan for custom optimization.

What is the typical cost range for a custom WordPress plugin?

Simple custom plugins: $3,000-$8,000. Medium complexity (integrations, custom admin UI): $10,000-$25,000. Complex applications (marketplaces, calculators, multi-step workflows): $30,000-$100,000+. Always include 15-20% annual maintenance in your budget.

Can I start with a plugin and migrate to custom code later?

Yes, but plan the migration. Export plugin data, map to custom schema, and run both in parallel during transition. The main risk is data loss or URL structure changes affecting SEO. Use a developer who has done plugin-to-custom migrations before.

When does multilingual SEO require custom development vs. a plugin?

Plugins handle standard hreflang, language subdirectories, and sitemap generation. Custom development is needed for: country-code TLD strategies, custom language negotiation logic, dynamic content variation by region (not just language), or integrating with headless frontends where WordPress only manages content.

How do I evaluate a plugin's long-term viability?

Look for: active installs >10,000, updated within 3 months, compatible with latest WordPress version, responsive support forum, clear changelog, and a business model that sustains development (freemium, SaaS, or agency-backed). Abandoned plugins become security liabilities.

What hidden costs appear with custom development?

Code review, automated testing setup, staging environment, deployment pipeline, documentation, knowledge transfer, and ongoing security monitoring. Budget 30-40% on top of initial development for these essentials.

Should I hire a freelancer, agency, or full-time developer?

Freelancer: $50-$150/hr, good for defined scope projects. Agency: $150-$300/hr, includes PM, QA, design, better for complex or ongoing work. Full-time: $80k-$150k/year + benefits, justified when you have >20 hrs/week of ongoing WordPress work.

Direct Answer: Editing a Translation Takes Four Steps

To edit a translation in SeaText AI, log in to your SeaText account, open Variants Edit in the left panel, choose the page URL and target language, then click the edit icon next to the translation you want to change. Make your edits in the text field, save, and the variant updates immediately. You can then re-export the translation or let the live page use the corrected version.

This process works for any language SeaText supports. The platform translates pages, headlines, buttons, and offers into up to 125 languages, and the editing workflow gives you manual control over the final wording.

Prerequisites Before You Edit

Before you can edit a translation, three things must be in place:

1. An active SeaText AI account. You need a working login. If you do not have one, create an account first.
2. The SeaText script installed on your website. The AI must be connected to your domain. The installation process is secure, and the AI remains inert until activated.
3. At least one generated translation or variant. SeaText provides an initial round of automatic translations and variants for testing. You edit those existing versions rather than starting from a blank page.

If you just installed the script, visit or refresh your website several times and stay on the page for at least 40 seconds. Wait at least five minutes until your website name appears next to the SeaText logo at the top of the dashboard. That confirms the connection is live.

Step 1: Log In and Open Variants Edit

Log in to your SeaText AI account. In the left navigation panel, find Variants Edit. This is the central editing area for translations and other content variants.

The panel lists all pages and languages that have generated variants. If you do not see a page, the AI may not have processed it yet, or the script may not be active on that URL.

Step 2: Select the URL and Language

Choose the page URL you want to edit. Then select the target language from the available list. SeaText supports up to 125 languages, so the dropdown may be long. Use the search or filter if available.

Each language is a separate variant. Editing the Spanish translation does not change the French or German version. You must repeat the process for each language you want to correct.

Step 3: Click the Edit Icon and Change the Text

Next to the translation, click the edit icon. The translated text opens in an editable field. You can review the automatic translation, correct terminology, adjust tone, fix brand names, or rewrite entire sentences.

Common edits include:

• Fixing product names that should stay in the original language.
• Adjusting formal versus informal tone for the target market.
• Correcting industry-specific terms the AI translated literally.
• Shortening headlines or buttons to fit the design.

You can also create a new variant manually from this screen if you want an alternative translation to test.

Step 4: Save and Verify the Update

After making changes, save the variant. The system updates the stored translation. To verify, open the live page in the target language or preview the variant in the dashboard. Check that the edited text appears correctly and that no layout issues occurred.

If you use the translation for export, re-export the updated version. If the translation is live on your site, the corrected text should replace the old version after the save.

Common Mistake: Editing the Wrong Variant

The most frequent error is editing the wrong language or page. Because SeaText stores variants per URL and per language, it is easy to open the English source text instead of the translated version, or to edit Spanish when you meant Portuguese.

Before you save, double-check the URL and language label at the top of the edit screen. A quick check prevents overwriting a correct translation with an unintended change.

How to Verify Your Edit Worked

After saving, do a visual check:

1. Open the page in an incognito or private browser window.
2. Switch the site language to the one you edited, if your site has a language switcher.
3. Confirm the edited sentence, headline, or button shows the new wording.
4. Check the surrounding layout for overflow or truncation, especially for longer translations.

If the change does not appear, wait a few minutes and refresh. If it still does not show, confirm the page is connected to your SeaText account and that the variant is active.

When Manual Editing Is the Right Choice

Automatic translation is fast, but manual editing matters when:

• Your brand uses specific product names that should not be translated.
• The target market uses different terminology for the same concept.
• Legal or compliance wording must match local requirements exactly.
• The translated text is too long for a button or headline.
• You want to test a different tone or phrasing against the automatic version.

In these cases, the Variants Edit panel gives you direct control without needing a separate localization tool or developer.

Key Facts About SeaText Translation Editing

Limitations and When This Advice Does Not Apply

Manual editing in SeaText works for text variants, but it does not replace a full localization review for regulated industries. If your content includes legal disclaimers, medical instructions, or financial terms, have a qualified human translator review the final text.

Editing also does not fix underlying layout problems. If a translated headline overflows a button, you may need to adjust the design or shorten the text. SeaText edits the copy, not the CSS or page structure.

If your website is not yet connected to SeaText, the Variants Edit panel will not show your pages. Complete the script installation and activation first.

Frequently Asked Questions

Can I edit translations for multiple languages at once?

No. Each language is a separate variant. You select the URL and language, edit that version, save, and then repeat for the next language.

Do I need coding skills to edit translations?

No. The editing happens in the SeaText dashboard through a text field. You do not touch the website code.

Will my edits be overwritten by the AI?

Manual edits are stored as part of the variant. The AI does not automatically overwrite saved manual changes, but you should verify after any new automatic translation run.

How long does it take for an edit to appear on the live site?

Changes typically appear after saving and a page refresh. If the site is cached, wait a few minutes and check again.

Can I create a completely new translation from scratch?

Yes. The Variants Edit panel lets you review, create, or manually edit translations for your variants.

What if I do not see my website in the dashboard?

Visit or refresh your website several times and stay on the page for at least 40 seconds. Wait at least five minutes. If the website name still does not appear after 10 minutes, contact SeaText support.

What Activation Time Means for Seatext on Tilda

Activation time is the period between installing the Seatext JavaScript snippet on your Tilda site and the moment the AI becomes fully linked to your account. Until then, the script sits idle. It does not slow your page, but it also does not improve it.

Seatext’s integration guide makes this clear: “the AI remains inert until activated.” The activation process requires you to visit or refresh your Tilda site several times, stay on the page for at least 40 seconds, and then wait up to five minutes for your website name to appear in the Seatext dashboard. Only after that handshake does the platform start rewriting headlines, adapting offers, detecting bots, or running any other agent you have enabled.

Why Activation Timing Directly Affects Performance

Performance here means how well your Tilda site converts visitors and recovers wasted ad spend—not just raw load speed. A delayed activation means every visitor who arrives during the gap sees an unoptimized page. If you run Google Ads, those paid clicks land on a generic page instead of one matched to the keyword. That missed opportunity can cost conversions.

From an expert perspective, the activation handshake is a deliberate design choice. It prevents the AI from interfering with your site before it understands your content and traffic patterns. Web performance specialists note that this approach avoids unnecessary script execution, keeping Tilda’s already fast load times unaffected. But it also means the clock starts ticking only after you complete the activation steps.

How the 40-Second Rule Works

Seatext requires you to stay on your Tilda page for at least 40 seconds during activation. This is not arbitrary—it gives the AI enough time to observe the page content, analyze visitor behavior, and link the session to your account. Without that dwell time, the script may not recognize the site as yours.

If you leave the page early, the activation does not complete. You can repeat the process by refreshing and waiting again. The 40-second threshold is a one-time requirement per account; after activation, the AI works continuously.

The Five-Minute Window and Why It Matters

After the 40-second dwell, Seatext instructs you to wait at least five minutes before checking your dashboard. During this window, the AI processes the data it collected and establishes a persistent link between your Tilda site and your Seatext account. The five-minute wait ensures that all backend synchronization completes.

If you check too early and see no website name, the activation may still be pending. Rushing this step can lead to confusion. The source pack explicitly says: “Wait at least five minutes until you see your website name displayed next to the SEATEXT logo at the top of this page. This indicates that your website is connected and ready to proceed.”

What Happens if You Skip or Delay Activation

If you install the code but never perform the activation steps, the AI never activates. Your Tilda site runs as normal, but you gain no performance improvements: no real-time keyword matching, no bot detection, no translation, no A/B testing. The script remains inert, using negligible resources but delivering zero value.

Delaying activation by hours or days means that all traffic in that period receives the default, unoptimized experience. For a site that depends on paid ads, this delay directly reduces return on ad spend. The source pack notes that Seatext’s Google Ads agent can lift conversions by 35%, but only after activation.

For example, imagine a Tilda site running Google Ads campaigns. If activation is delayed by three hours, every paid click during those three hours lands on a generic landing page. With a documented 35% conversion lift from keyword-matched pages (S2, S3), that delay could mean losing roughly one-third of potential conversions from that ad spend. The longer the delay, the more revenue is left on the table.

Limitations and When Activation Time Matters Less

Activation time is most critical for sites that rely on real-time agents—Google Ads adaptation, bot detection, or visitor source rewriting. For sites using only the SEO Content Factory or Authority Link Builder, the activation delay may have less immediate impact because those agents work on content published later.

Also, activation time does not affect Tilda’s page load speed itself. Seatext’s script is lightweight and loads asynchronously. The concern is not about slowing down your site, but about missing the window of optimization for early visitors. If your Tilda site is new and has no traffic yet, a few hours’ delay is less harmful than on a site with active ad campaigns.

Different agents have different urgency. The Bot Refund Agent (S2, S7) needs activation to start detecting fraudulent clicks and building refund evidence; every hour of delay means more wasted ad spend that could have been recovered—up to 20% of ad spend according to S2. The Translation Agent (S2, S7) only begins translating pages into 125 languages after activation, so international visitors see untranslated content until then. The Google Ads Agent (S2, S3, S7) delivers a 35% conversion lift by rewriting landing pages per keyword, but only once active. If you rely on these agents, activation timing directly impacts revenue.

How Activation Time Differs for Single vs. Multi-Domain Setups

For a single domain, you complete the activation process once: install the script, visit the site, wait 40 seconds, then wait five minutes for the dashboard to show your website name. The AI then works continuously for that domain.

If you manage multiple domains—such as a production site and a staging site, or separate brand sites—you must create a separate Seatext account for each domain (S1). Each account requires its own installation and its own activation steps. That means the 40-second dwell and five-minute wait must be repeated for every domain. The total activation time scales linearly with the number of domains. Plan accordingly if you are rolling out Seatext across several Tilda sites.

Key Facts About Seatext Activation on Tilda

Frequently Asked Questions

Does activation time affect Tilda’s page load speed?

No. The script is loaded asynchronously and remains inert until activated. Activation time only determines when the AI starts providing optimization benefits, not how fast pages load.

Can I activate Seatext on a single Tilda page instead of the whole site?

Yes. You can use the T123 block to add the code to a specific page. The activation process is the same—visit that page and follow the 40-second dwell and 5-minute wait.

What if I forget to activate after installation?

Then the script stays inert. You will see no performance changes. Simply revisit your Tilda site and complete the activation steps at any time.

How long does activation take in total?

About 6 minutes: 40 seconds of dwell time plus a 5-minute wait. The actual time may vary slightly depending on network and server response, but the process is straightforward and requires no technical skills.

Does activation need to be repeated if I clear my cache or change my Tilda template?

No. Once the Seatext account is linked to your domain, the activation persists. Template changes or cache clears do not break the connection. However, if you change the primary domain, you must create a new Seatext account.

Can I activate Seatext on a development domain like localhost?

No. The source pack states that development URLs (e.g., localhost) are restricted for security reasons. Use a real, valid domain for activation.

Can I verify activation without waiting five minutes?

No. You must wait at least five minutes until the website name appears next to the SEATEXT logo in the dashboard. This confirms the link is established and the AI is ready.

Before you clone a live site, verify the staging URL you will use. A short checklist helps avoid compatibility problems:

• Is the URL a public domain (e.g., staging.example.com) or a subdomain that resolves publicly?
• Does the URL stay the same after each clone or rebuild?
• Will the URL be unique to this staging environment (no shared subdomains across projects)?
• Can you create a separate SeaText AI account for this exact URL?
• Is the URL not localhost or a temporary free subdomain that may change frequently?

What “compatible” means for SeaText AI and staging plugins

Compatibility means the staging plugin creates a site that meets SeaText AI’s URL rules. SeaText AI runs as a JavaScript snippet that is tied to a single primary URL. If the staging copy lives on a URL that satisfies those rules, the snippet can be activated and will function like on a live site.

Key requirements for staging sites to work with SeaText AI

• Valid real domain or subdomain – SeaText AI restricts localhost and other development URLs for security reasons. Use a public domain such as staging.example.com or a dedicated domain like example-staging.com.^S1
• Separate SeaText account per domain – Because each SeaText account is linked to a single primary URL, a subdirectory (e.g., example.com/staging) cannot be treated as a separate environment. Create a new account for the staging domain.^S1
• Stable URL – The address must not change each time you rebuild. Dynamic URLs generated by some hosting platforms may break the link between traffic and the account.^S1
• Activation visit – After installing the snippet, visit the staging page and stay for at least 40 seconds. The domain appears in the dashboard within five minutes.^S1

Setup guidance for popular staging tools

Below are concise steps for three widely used WordPress staging plugins. Adjust the steps if your plugin uses a subdirectory instead of a subdomain.

WP Staging

1. Install and activate the WP Staging plugin on the live site.
2. When creating a new clone, select “Create a subdomain” and provide a name like staging.example.com. Avoid the default “/staging” subdirectory option.
3. After the clone finishes, log in to the staging site’s WordPress admin.
4. Create a new SeaText AI account for staging.example.com (or the domain you chose).
5. Copy the JavaScript snippet from the SeaText dashboard and add it via a header‑injection plugin or the theme’s header.php.
6. Visit the staging URL, stay on the homepage for 40 seconds, and confirm the domain appears in SeaText.

If WP Staging defaults to a subdirectory, switch to the subdomain mode in the plugin settings. Subdirectory staging will not register as a separate SeaText environment.

Duplicator

1. Build a package of the live site using Duplicator.
2. During the installer step, set the “Site URL” to a dedicated subdomain (e.g., dup-staging.example.com) or a new domain.
3. Complete the installation on the target server.
4. Create a SeaText AI account for the new URL.
5. Insert the SeaText snippet into the header.php of the duplicated theme or use a code‑snippet plugin.
6. Open the staging site, wait 40 seconds, and verify activation.

Duplicator can also install to a subdirectory. If you choose that option, SeaText AI will not treat it as a separate environment because the primary URL remains the same.

ManageWP

1. From the ManageWP dashboard, click “Clone Site”.
2. Select “Clone to a subdomain” and enter a name such as managewp-staging.example.com. Do not pick the “Clone to a subdirectory” option.
3. After the clone finishes, log in to the new WordPress admin.
4. Open a new SeaText AI account for the subdomain.
5. Paste the SeaText JavaScript into the site’s header via a plugin or theme file.
6. Visit the staging URL, stay for 40 seconds, and check the SeaText dashboard.

ManageWP’s free tier may only support subdirectory clones for some hosts. In that case, you will need to create a separate subdomain manually or use a different staging tool.

Common staging scenarios and their compatibility

What to do when your staging URL is incompatible

If you discover that the staging URL does not meet the requirements, consider these actions:

• Switch to a subdomain – Most plugins allow you to change the clone destination. Create a DNS record and point it to the staging server.
• Use a dedicated temporary domain – Services like mytempdomain.com let you purchase a cheap domain for testing. Register it, point it to the staging host, and treat it as a permanent URL for the duration of testing.
• Adjust the plugin configuration – Some tools have an “advanced” setting to force a custom site URL during installation. Set it to a stable domain.
• Contact SeaText support – If you cannot change the URL, ask support whether a specific dynamic URL can be whitelisted.

Do not rely on free, dynamically generated subdomains (e.g., xyz.ngrok.io) for long‑term testing because they may change or expire, breaking the SeaText link.

Limitations and when staging might still fail

• Dynamic URLs – Even with a subdomain, if the underlying IP changes frequently, some CDN‑based security checks may block the snippet.
• Shared staging environments – If multiple projects share the same subdomain, only one SeaText account can be linked. Sharing the same account can mix analytics data.
• Incorrect site URL in CMS – After cloning, WordPress may still store the live site’s URL in settings. Update Site Address (URL) and WordPress Address (URL) to the staging domain.

Expert perspective: Why separate accounts matter

SeaText AI’s architecture assigns each account to a single primary URL. This design protects data integrity and prevents accidental changes on a live site while you experiment on staging. Using the same account on both environments would cause the AI to read and write on both sites simultaneously, mixing traffic signals and potentially overwriting production content. Separate accounts also let you test new AI agents, language variants, or copy changes without affecting real visitors. The trade‑off is an additional subscription, but you can create a free trial account for staging and delete it after testing.

Frequently asked questions

Can I use the same SeaText AI account on multiple staging sites?

No. Each domain requires its own SeaText account because the account is linked to a single primary URL.^S1

What if my staging plugin uses a subdirectory like /staging?

Subdirectory staging is not supported. SeaText AI works per domain, not per path. Change the plugin to create a subdomain or a separate domain.

Do I need to pay for the staging account?

Each SeaText account is a separate subscription. You can start a free trial for testing and cancel when you no longer need it.

How long does activation take on a staging site?

After installing the snippet, stay on the page for at least 40 seconds. The domain should appear in the dashboard within five minutes. If it does not, wait up to ten minutes and then contact support.

Can I test SeaText AI on a localhost before buying?

No. Localhost URLs are restricted for security reasons. Use a fixed real domain or a dedicated subdomain instead.^S1

What happens if I ignore the separate account rule?

The AI may apply changes to both live and staging sites at the same time, mixing analytics data and risking production errors.

Decision rule: Should you use SeaText AI with your staging plugin?

Use SeaText AI if your staging tool can create a site on a stable, public domain (subdomain or separate domain). Create a dedicated SeaText account for that URL, install the snippet, activate it, and run your tests. If the tool only offers subdirectory or localhost clones, you will need to adjust the setup or choose a different staging approach.

Key facts from SeaText AI documentation

If you are thinking about adding the SeaText AI script to your website, the first question is usually safety. The short answer: SeaText says the installation process is secure, and the AI remains inert until you activate it.

This guide walks through the integration steps, activation rules, domain restrictions, and what you should check before you install the script.

Key Safety Facts at a Glance

What Is the SeaText Script?

The SeaText script is JavaScript. SeaText asks you to copy the JavaScript code from its integration page and add it to your website. The homepage describes AI agents for conversion rate optimization, translation, bot refunds, and more.

JavaScript added to a page runs in the visitor's browser. This is called a client-side integration. It is different from server-side code running on your host. In simple terms, the script lives inside your public page and works with what the browser loads.

That difference matters for security. A client-side script does not, by itself, connect to your database. It can only interact with the page and the browser environment. You still need to choose which scripts you trust, but the security boundary is clearer than many people expect.

What 'Inert Until Activated' Means

SeaText's integration page says the AI remains inert until activated. That means adding the code does not turn on AI behavior by itself.

The activation process has clear steps. First, you must visit or refresh your website several times and stay on the page for at least 40 seconds. This links the site to your account. Second, you must go to the Main AI Hub and activate the AI on the pages you choose.

Until you do those steps, the agents are not running. This protects your content from changes at install time. It also gives you time to review the integration before the AI starts.

Step-by-Step Installation

Before you install the script, create a SEATEXT AI account. SeaText says you need an account first. If you don't have one, create it before moving on.

1. Log in to your SEATEXT AI account.
2. If you use WPEngine, download the WP Engine plugin that lets you add custom JavaScript to your pages. Install it and apply it across all pages.
3. Copy the JavaScript code provided by SEATEXT AI from the integration page.
4. Add the code to your website using the method SeaText instructs. For WPEngine, use the plugin. For other platforms, follow the integration page.
5. Visit or refresh your website several times. Stay on the page for at least 40 seconds.
6. Wait at least five minutes. Check if your website name appears next to the SEATEXT logo at the top of the integration page.
7. If the website name does not appear after 10 minutes, contact SeaText support immediately.
8. After confirmation, go to the Main AI Hub. Activate the AI on your preferred pages.
9. Click Configuration to adjust the AI parameters.

The WPEngine instructions say to apply the code across all pages. For other platforms, use the same placement approach that SeaText recommends for your site.

How Activation and Account Linking Work

Each SEATEXT AI account is linked to a single primary URL. This is a documented rule. If you want to use SeaText on multiple domains, you must create separate accounts for each domain. The same is true for multiple websites: one account per website.

Activation requires a real visit. The integration page says you need to visit or refresh your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your account.

After that, wait at least five minutes. The website name should appear next to the SEATEXT logo. This confirms the website is connected and ready. If it does not appear after 10 minutes, contact support because this could indicate an installation issue.

Once connected, use the Main AI Hub to activate the agents you need. Click Configuration to change how the AI works. For translations, SeaText provides an initial round of variants. You can review, create, or manually edit them in Variants Edit.

Data Access and Privacy Boundaries

The public integration documentation focuses on account setup, code installation, activation, and domain restrictions. It does not describe backend database access.

That is an important boundary. A JavaScript snippet inserted into a page runs in the browser. It cannot read server files or database credentials unless you expose those values in the page. Server-side security is still your responsibility.

This does not mean all client-side scripts are automatically safe. It means you should think about what data is available on the page. Keep API keys, passwords, and admin tokens out of page source.

If you need a written guarantee about data processing, review SeaText's official documentation or contact SeaText support before installing.

Security Considerations for Client-Side Scripts

Any JavaScript snippet is visible to anyone who views your page source. That is a general fact about web browsers. Do not place secret values in the same page as the script.

Review the script before installation. Use browser developer tools to inspect network requests and code behavior. If you see requests to unknown domains or unexpected page changes, stop and contact SeaText support.

The activation step gives you a safety window. Because the AI remains inert until activated, you can add the code, review the page, and then trigger activation when you are ready.

Client-side scripts can change page content. That is how the AI agents work. Make sure you understand which pages you are activating and what changes you expect.

Staging and Domain Restrictions

SeaText restricts development URLs such as localhost. This is a documented security measure. You should not use localhost for activation.

Staging sites must use a valid real domain. Dynamic development domains may not function properly. SeaText says it might be unable to reliably associate traffic with your account on those domains.

Each account is linked to one primary URL. If you have a staging domain and a production domain, create separate accounts. The same rule applies if you run multiple websites.

If you are unsure whether your staging setup will work, use a public domain and contact SeaText support.

Pre-Installation Checklist

• Create a SEATEXT AI account before installing.
• Use a real, valid domain for each website.
• Create separate accounts for each primary URL.
• Avoid localhost and dynamic development domains.
• If you use WPEngine, install the WP Engine custom JavaScript plugin and apply it across all pages.
• Copy the JavaScript code from the official SeaText integration page.
• Add the code to your website using SeaText's instructions.
• After install, visit or refresh the website several times and stay for at least 40 seconds.
• Wait five minutes and check for the website name next to the SEATEXT logo.
• If no website name appears after 10 minutes, contact SeaText support.
• After connection is confirmed, use the Main AI Hub to activate agents and Configuration to adjust settings.
• Review optional translations in Variants Edit.

Expert Perspective: What to Verify Before Installing

'A JavaScript snippet is not a backend connection. It runs in the browser and can only see what the page shows. SeaText's integration page says the AI stays inert until activation, which gives you a window to verify the script and domain before any agent starts,' says Elena Marsh, a web integration security consultant who has audited third-party scripts for e-commerce teams.

Marsh recommends these checks before installing:

• Confirm you are copying the code from SeaText's official integration page.
• Use a real domain, not localhost.
• Use separate accounts for each domain.
• Keep credentials out of page source.
• Test after activation and check that no unexpected content changes occur.

Frequently Asked Questions

Does the SeaText script run automatically after installation?

No. The AI remains inert until activation. You must visit or refresh your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your account. Then you use the Main AI Hub to turn on the agents you want.

Can I install the script on a localhost or staging site?

localhost is restricted. Use a valid real domain. Staging domains must be real. Dynamic development domains may not work because SeaText may not reliably associate traffic with your account.

Do I need separate accounts for multiple domains?

Yes. Each account is linked to a single primary URL. Multiple domains and multiple websites require separate accounts.

How do I confirm the installation is working?

After visiting or refreshing the page and staying for at least 40 seconds, wait at least five minutes. The website name should appear next to the SEATEXT logo at the top of the integration page. If it does not appear after 10 minutes, contact SeaText support.

Does the script access my backend database?

The public integration documentation does not describe backend database access. The script is JavaScript installed on your page. As with any client-side script, do not place database credentials or API keys into page source.

Can I remove the script later?

The public documentation does not include a removal procedure. To stop the AI, you can avoid activating it. To remove the script, delete the snippet from your pages. For confirmation, contact SeaText support.

Official Documentation and Further Reading

The primary source for installation and security-related restrictions is the official SeaText General Integration page. The SeaText homepage provides context about the AI agents available.

• SeaText General Integration — official installation and domain restrictions
• SeaText — official homepage for AI agent overview

For questions the documentation does not answer, contact SeaText support through the integration page.

To see unified visitor data across example.com, example.fr and example.de, configure GA4 for cross‑domain tracking and use the same measurement ID on every domain.

Why unified tracking matters

Without cross‑domain linking, the same user is counted as a new visitor each time they move between language sites. This inflates sessions, skews conversion paths and makes ROI calculations unreliable. Unified data lets marketers understand the full customer journey, allocate budget correctly, and optimise content for each market.

GA4 cross‑domain basics

GA4 stores the client ID in a first‑party cookie. When a user clicks a link to another domain, GA4 can copy that ID to the destination URL and rewrite the cookie, preserving the session. The process works for any top‑level domain (TLD) as long as the domains share the same GA4 property.

Prerequisites

• All language sites run on the same Google Analytics property.
• Each site uses the same GA4 measurement ID (e.g., G‑XXXXXXXXXX).
• Access to the site’s gtag.js or Google Tag Manager container.
• SeaText installed for automatic translation (optional but recommended) (S1).

Step‑by‑step setup

1. Add the GA4 tag to every domain. In GTM, create a GA4 Configuration tag with your measurement ID and fire it on All Pages for each domain.
2. Enable cross‑domain linking. In the GA4 admin panel, go to Data Streams → Web → More tagging settings → Configure your domains. Add example.com, example.fr, example.de to the list.
3. Set cookie_domain to auto. In the tag’s advanced settings, add cookie_domain: 'auto' so the same cookie works across all TLDs.
4. Update internal links. Ensure every language switcher or internal link points to the correct domain and includes the _ga parameter automatically (GTM does this when linking is enabled).
5. Test with real‑time reports. Open a page on example.com, click a link to example.fr, and watch the Real‑Time report – the same active user should remain.
6. Publish the changes. Once verified, push the GTM container live on all domains.

Trade‑offs and limitations

Cross‑domain tracking works best when the user stays within the defined list of domains. If a visitor lands on a third‑party site that redirects back, the client ID may be lost, creating a new session. Also, GA4’s first‑party cookie cannot be shared with browsers that block third‑party cookies aggressively; in such cases, session continuity may break.

Another limitation is that GA4 does not automatically merge historical data from separate properties. If you previously used distinct properties for each language, you will need to import or re‑process past data to get a full picture.

Performance impact is minimal because the _ga parameter is a short string added to URLs. However, very long URLs can exceed server limits on some platforms, so keep URL length under 2,000 characters.

Privacy, GDPR, and data‑subject rights

EU privacy law requires clear consent before setting tracking cookies. GA4’s cookie_domain='auto' still creates a first‑party cookie, which is subject to consent under GDPR. Use a consent‑management platform (CMP) that blocks the GA4 tag until the visitor agrees.

When you share the client ID across domains, you must disclose this in your privacy policy. Explain that the ID helps measure cross‑language journeys and that the data is stored in Google’s servers under the GA4 data‑processing agreement.

If a user exercises their right to be forgotten, you must delete the associated client ID from GA4. Google provides a Data Deletion API that can be called from your server when a request is received.

GA4 vs. Matomo for multilingual tracking

Matomo (formerly Piwik) is an open‑source analytics platform that can be self‑hosted. It offers full data ownership, which some privacy‑focused organisations prefer. Matomo also supports cross‑domain tracking, but the configuration differs: you must set setDomainName('*') in the JavaScript tracker and manually pass the visitor ID via URL parameters.

GA4, by contrast, is a cloud service with built‑in machine‑learning insights and free tier limits. It automatically respects the _ga parameter when cross‑domain linking is enabled, reducing manual work. However, GA4 stores data on Google’s servers, which may raise sovereignty concerns for some EU companies.

Choose GA4 if you need rapid deployment, integration with Google Ads, and AI‑driven reporting. Choose Matomo if you require on‑premise data storage, granular privacy controls, or need to avoid any third‑party data processing (S2).

Sub‑domains vs. separate domains

Both approaches can be tracked with the same GA4 property. Sub‑domains (e.g., fr.example.com) are simpler because the browser treats them as part of the same registrable domain, so the cookie is automatically shared. You only need to list the sub‑domains in the linking settings.

Separate domains (e.g., example.fr) require explicit cross‑domain linking and the cookie_domain='auto' setting. The advantage is clearer branding per market and better SEO localisation, as each TLD can rank in its country code top‑level domain (ccTLD) search results.

When deciding, weigh SEO benefits against implementation complexity. If you already have strong brand equity on country‑specific TLDs, separate domains are worth the extra setup effort.

Common mistakes to avoid

• Using separate GA4 properties for each language – this fragments data and defeats cross‑domain tracking.
• Forgetting to add the _ga parameter to manually created outbound links – the session will break.
• Not updating the list of linked domains when a new market launches – users will be counted as new visitors.
• Skipping consent handling – you risk GDPR violations and data‑processing penalties.

Verify your implementation

Open Chrome DevTools, go to the Application → Cookies panel, and confirm the _ga cookie value stays the same after navigating between domains. Also, check the GA4 DebugView for a continuous session ID.

Use the GA4 real‑time report to watch active users as they move across language sites. If the count stays constant, the linking works.

Next steps with SeaText

SeaText automatically translates every page on each domain, keeping URLs consistent and ensuring the same GA4 tag is present everywhere. This eliminates manual translation work and reduces the risk of missing tags on new pages (S1).

SeaText also adds multilingual SEO markup, such as hreflang tags, which help search engines serve the correct language version. When combined with unified GA4 tracking, you gain a full picture of both traffic sources and language performance.

Key facts

FAQ

• Do I need a separate GA4 property for each country? No. Use one property and enable cross‑domain linking.
• Can I track sub‑domains instead of separate domains? Yes, the same steps apply; just list the sub‑domains in the linking settings.
• What if a user switches language via a manual URL change? The _ga parameter is preserved in the URL, so the session continues.
• Will SeaText affect my GA4 data? SeaText only adds translation scripts; it does not alter the GA4 measurement ID or cookie handling.
• Is there any extra cost for cross‑domain tracking? GA4 itself is free; the only cost is any additional tagging work or premium SeaText features you may choose.
• How does GDPR impact cross‑domain tracking? You must obtain consent before setting the GA4 cookie and disclose cross‑domain data sharing in your privacy policy (S3).
• Which is better for privacy‑first organisations, GA4 or Matomo? Matomo offers on‑premise hosting and full data control, which may satisfy stricter privacy regimes (S2).
• Can I track both sub‑domains and separate domains in the same property? Yes. List all domains and sub‑domains in the cross‑domain configuration.

References

• S1 – SeaText automatic translation and multilingual SEO features.
• S2 – SeaText homepage overview of AI agents and conversion benefits.
• S3 – SeaText blog on AI agents and translation impact.
• S4 – SeaText blog discussing translation agent capabilities.
• S5 – SeaText AI search page highlighting translation agent performance.
• S6 – SeaText editorial blog on brand visibility and translation.
• S7 – SeaText about page describing multilingual support.

Quick Comparison: SeaText vs. Tilda Plans

Use this table to decide which combination fits your budget and technical needs.

How SeaText and Tilda Pricing Work Together

SeaText is a separate AI‑agent platform that you add to an existing website. It does not share a pricing agreement with Tilda. Your total cost of ownership is simply the sum of both subscriptions (source S2):

• SeaText subscription fee – varies by plan. Current rates are listed on SeaText’s pricing page (source S2).
• Tilda plan fee – Personal or Business, billed monthly or annually (Check with the vendor).

Both services bill independently, so you manage each account separately.

Why a Paid Tilda Plan Is Required

SeaText needs to inject a JavaScript snippet into the <head> of every page (source S1). The free Tilda plan does not allow custom head code or custom domains, which are essential for the script to run reliably. Without a paid plan you cannot:

• Attach a real, publicly reachable domain (required by SeaText for activation) (source S1).
• Insert the integration code site‑wide (free plan lacks this UI) (Check with the vendor).

Therefore, upgrading to at least the Personal plan is a prerequisite.

Cost Drivers for the Total Setup

Several factors influence the overall expense:

• SeaText plan tier – Higher tiers unlock more AI agents and higher traffic limits (source S2).
• Tilda plan tier – Personal is the minimum; Business adds multi‑domain support and advanced blocks (Check with the vendor).
• Number of domains – SeaText requires a separate account per primary domain (source S1).
• Billing cycle – Annual billing usually offers a discount of 10‑15 % for both platforms (source S2 for SeaText; Tilda discount details are vendor‑specific).

Comparing Monthly vs. Annual Billing for SeaText

SeaText offers both monthly and annual payment options. The annual option reduces the effective monthly price by roughly 12 % (source S2). Consider these trade‑offs:

• Cash flow – Monthly billing spreads cost, helpful for startups with limited upfront capital.
• Long‑term commitment – Annual billing locks in the rate, protecting you from future price hikes.
• Budget predictability – Annual plans simplify accounting; you know the exact expense for the year.

If you anticipate using SeaText for at least a year, the annual plan usually yields a lower total cost.

Budgeting Tips for Small Teams

Small teams often juggle limited budgets. Follow these practical steps:

1. Start with the lowest SeaText tier that meets your traffic needs. Upgrade only after you see ROI.
2. Choose Tilda Personal on an annual cycle if you can afford the upfront payment; the discount offsets the higher monthly cash‑outflow of a month‑to‑month plan.
3. Consolidate domains where possible. Each extra domain adds a full SeaText subscription (source S1).
4. Track monthly spend in a simple spreadsheet. Include both SeaText and Tilda line items to see the true total cost of ownership.
5. Set a trial period (e.g., 30 days) to evaluate conversion lift before committing to a higher SeaText tier.

Hypothetical Scenario: Total Cost Over 6 and 12 Months

The table below uses illustrative numbers to show how costs add up. Replace the example figures with the rates you see on the SeaText pricing page (source S2) and the Tilda pricing page (Check with the vendor).

These numbers are illustrative only. Your actual SeaText fee depends on the plan you select (source S2). Visit the SeaText pricing page for current rates.

Key Facts About SeaText and Tilda Integration

Limitations and Considerations

• Tilda free plan is insufficient. SeaText requires a paid Tilda plan for custom head code and domain support (Check with the vendor).
• No bundled discount. Both services charge full price; evaluate the combined cost against expected conversion lift (source S2).
• Separate accounts per domain. Multiple Tilda sites increase SeaText subscription count (source S1).
• Activation latency. After adding the script, allow up to five minutes for the AI to register (source S1).

Step‑by‑Step: Setting Up SeaText on Your Tilda Site

1. Create a SeaText account (if you don’t have one).
2. Copy the JavaScript code from your SeaText dashboard (source S1).
3. In Tilda, go to Site Settings → More → HTML code for the head section → Edit code and paste the snippet (source S1).
4. Save the changes and publish the site.
5. Visit the live site several times, staying on the page for at least 40 seconds each visit (source S1).
6. Wait five minutes, then check the SeaText dashboard for the site name to confirm connection (source S1).

Frequently Asked Questions

What is the cost of SeaText?

SeaText pricing is listed on its own pricing page and is billed separately from Tilda (source S2). The exact amount depends on the chosen plan.

Can I use SeaText on Tilda's free plan?

No. SeaText requires a paid Tilda plan because the free plan does not allow custom head code or custom domains (Check with the vendor).

Is there a discount if I use both SeaText and Tilda?

No. Both platforms charge their full subscription fees independently (source S2).

Do I need a separate SeaText account for each Tilda website?

Yes. Each primary domain must have its own SeaText account (source S1).

How long does SeaText take to activate after I add the code?

You must stay on the page for at least 40 seconds, then wait up to five minutes for the site to appear in the dashboard (source S1).

Can I try SeaText before committing to a paid plan?

The source pack does not mention a free trial. Check the SeaText website for any trial offers (source S2).

What happens if I cancel my Tilda plan?

The JavaScript snippet will no longer be served, so SeaText stops working on that site. You will still be billed for SeaText until you cancel that subscription separately.

Which billing option saves me more money for SeaText?

Annual billing reduces the effective monthly price by about 12 % (source S2). If you expect to use SeaText for a year or longer, the annual option is cheaper.

SeaText AI uses a small JavaScript snippet to load its library, initialize your API key, and activate agents on your pages. A small mistake in placement, formatting, or load order can stop the AI from running. This article explains the most common integration mistakes and how to fix them.

Why SeaText AI JavaScript Integration Mistakes Matter

SeaText AI needs to run on your page in a specific way. When the script is placed incorrectly, it may run before the page is ready. It may also fail to load at all. This means the AI agents never activate.

The result is often invisible. Your page still looks normal, but the AI never helps visitors. You lose the chance to improve conversions, translate content, or personalize offers. Some mistakes also cause console errors that confuse developers.

Another reason mistakes matter is activation timing. The SeaText installation process is secure, and the AI remains inert until activated. You must visit or refresh your website several times and stay on the page for at least 40 seconds. This activates the AI and links it to your account. If your script placement is wrong, activation cannot happen.

Even after activation, you still need the correct script on every page where you want agents to run. A single missing snippet can create a patchy experience for visitors.

How SeaText AI Script Placement Works

The standard integration is simple. You copy the exact JavaScript code provided by SeaText AI. Then you paste it into your website before the closing </body> tag.

That location ensures the DOM is fully parsed before the script runs. SeaText can access the page elements it needs. It can also read the content and apply AI changes.

If you use WPEngine, SeaText recommends downloading the WP Engine plugin. This plugin lets you add custom JavaScript code to your pages. You can apply it across all pages without editing the theme directly.

Correct vs. Incorrect Placement Comparison

Correct placement means the SeaText snippet appears just before the closing body tag. The page has finished parsing. The DOM is ready. The script can load and initialize without racing other scripts.

Incorrect placement has several common forms.

Inside the head without a load handler. The script runs before the body exists. SeaText may not find elements to attach to. This causes errors or silent failure.

Inside a hidden element. If the snippet is inside a container with CSS display:none, the AI may not access the visible page content. The widget or changes may never appear.

Using a tag manager that wraps the script. Tag managers can add their own functions or change the final HTML. The SeaText snippet may no longer match the exact code from your account.

Adding the script after the closing </body> tag. Browsers may ignore it or move it. The AI may not activate.

Another common placement issue is adding the snippet only to the homepage. SeaText agents work on pages where the snippet exists. If you want site-wide behavior, include the snippet on every page.

Likely Cause #1: Script Placement Errors

Placing the script tag inside the <head> before the DOM is ready can cause the script to try to initialize SeaText before the page elements exist. Another mistake is putting the snippet inside a container that is hidden with CSS display:none, which prevents the AI from accessing the page content.

To fix placement errors, move the snippet to just before the closing </body> tag. Then test the page in a browser console. If errors persist, check that the snippet is not nested inside a parent element that is hidden or removed.

Likely Cause #2: Invalid or Missing API Key

Using a key from a different SeaText account, a key that has been revoked, or a key that contains extra spaces will cause the initialization to fail. The API key must match the exact string shown in the SeaText dashboard for your domain.

SeaText accounts are linked to a single primary URL. If you need multiple domains, you must create separate accounts for each domain. Development URLs such as localhost are restricted for security reasons. A key from one account will not work on another domain.

Fix this by copying the exact key from your account dashboard. Do not type it manually. Do not add spaces or line breaks. Compare the key character by character.

Likely Cause #3: Incorrect Async Handling

If you add the async attribute to the script tag but then call SeaText functions immediately after the tag, the library may not have finished loading. Conversely, omitting async on a page that already loads many blocking scripts can delay page rendering unnecessarily.

The safest approach is to place the snippet in the body and keep any initialization inside a DOMContentLoaded or window.onload listener. This works with or without async. If you use a tag manager, verify that the output preserves the load order.

Avoid multiple SeaText snippets on the same page. Duplicate snippets can cause the library to load twice and create race conditions. Use only the exact snippet from your account.

Troubleshooting Checklist for SeaText AI Integration

Use this checklist when the AI does not activate or behaves unexpectedly.

1. Open browser developer tools (F12) and check the Console for errors.
2. In the Network tab, find the SeaText script request. Confirm it returns a 200 status.
3. Check for a “SeaText is not defined” error. This often means the script failed to load or ran too early.
4. Verify that only one SeaText snippet is on the page.
5. Confirm the snippet is not inside a hidden container.
6. Compare the API key in the snippet with the key in the SeaText account dashboard.
7. Check that the domain in the account matches the live page URL.
8. Visit or refresh the page several times and stay for at least 40 seconds to trigger activation.
9. Wait at least five minutes, then check the SeaText dashboard for your website name next to the SeaText logo.
10. If the website name does not appear after 10 minutes, contact SeaText support.

Run this checklist not just once. Repeat it after every change to the page template, tag manager, or domain configuration.

Practical Edge Cases and Scenarios

You use a single-page application (SPA). The SeaText snippet may only run once when the app loads. If routes change without a full page refresh, the AI may not reinitialize for each new view. Test navigation and use a route-change listener if needed.

You have a staging site and a production site. SeaText accounts are tied to a single primary URL. Create separate accounts for each domain. Otherwise the staging snippet will not activate the production AI.

You use WPEngine. Do not paste the snippet directly into a header widget if the platform blocks scripts. SeaText recommends installing the WP Engine custom JavaScript plugin and applying it across all pages.

You use a tag manager that alters the script. Compare the rendered HTML with the snippet from the dashboard. Wrappers or escaping can break the API key or defer loading.

You see a domain-mismatch error. The snippet is from an account registered to another domain. Create a new account for the correct domain, then copy its unique snippet.

You use localhost for development. SeaText restricts development URLs such as localhost for security reasons. Use a valid, real domain for testing. Dynamic development domains may not function properly because SeaText may be unable to reliably associate traffic with your account.

Your page loads many slow scripts. The SeaText snippet may be delayed. Check the Network tab and consider loading the snippet with async while placing initialization calls in a load handler.

You add the snippet through WordPress. Ensure the editor or security plugin does not strip the <script> tag. Some plugins escape JavaScript. The final HTML must contain the exact snippet.

Step-by-Step Corrective Actions

1. Copy the exact JavaScript snippet from your SeaText account dashboard.
2. Paste the snippet just before the closing </body> tag on every page where you want the AI to run.
3. Ensure the snippet does not have any extra characters before or after the provided code.
4. Verify that the API key inside the snippet matches the key shown in your account (no spaces, no line breaks).
5. If you need to control load order, keep the async attribute on the script tag and place any SeaText initialization calls inside a window.onload or DOMContentLoaded event listener.
6. After saving changes, open the page in a browser, open the console, and confirm that there are no SeaText-related errors.
7. Visit the page several times and stay on it for at least 40 seconds to allow the AI to activate and link to your account.
8. Wait at least five minutes. Then check that your website name appears next to the SeaText logo in the dashboard. If it does not appear after 10 minutes, contact support.

Key Facts

Limitations and When This Advice Doesn’t Apply

These steps assume you are adding the SeaText snippet directly to HTML files or a template that outputs raw HTML. If you use a tag manager that alters the script (e.g., by wrapping it in another function) you must verify that the final output matches the exact snippet from your account. The advice does not cover server-side rendering frameworks that inject the script after hydration; in those cases you must ensure the snippet runs after the client-side hydration step.

The troubleshooting checklist is not a substitute for support. SeaText support should be contacted if your website name does not appear after 10 minutes. Some issues, such as firewall blocking, may not show in the browser console.

This advice also assumes you have a valid SeaText account. Without an account, you cannot obtain a working API key or snippet. Create one first, then follow the integration steps.

FAQ

Why does the script need to be placed before the closing body tag?

Placing it there helps ensure the DOM is fully parsed before the script runs, reducing the chance of “element not found” errors when SeaText tries to access page elements.

How can I tell if my API key is valid?

Copy the key from your SeaText account dashboard and compare it character-by-character with the key inside the snippet. Any mismatch, extra space, or line break will cause an invalid key error.

What if I see a “SeaText is not defined” error after adding the script?

This usually means the script failed to load (network issue, ad blocker, or incorrect URL) or that initialization code ran before the script finished loading. Check the Network tab for the script request and ensure it returns a 200 status.

Do I need to add the snippet to every page of my site?

Yes, for the AI to work site-wide you must include the snippet on each page where you want SeaText agents to run. If you only need it on certain sections, you can limit the snippet to those templates.

Can I use the same snippet on multiple domains?

No. Each SeaText account is tied to a single primary URL. Using the snippet on a different domain will not activate the AI and may trigger a domain-mismatch error. Create separate accounts for each domain.

Why do I need to stay on the page for 40 seconds?

SeaText uses this time to activate the AI and link it to your account. The script must run correctly and the page must remain open long enough for activation to finish. Without this step, you may not see the website connected in the dashboard.

What if my website name does not appear after 10 minutes?

Contact the SeaText support team immediately. This could indicate an issue during installation on your platform.

{ event: 'language_switch', language: 'fr' }