The direct answer: a verification window, not a random timer

The 40-second duration is not an arbitrary countdown. It is the minimum time SEATEXT needs to confirm two things: that the JavaScript snippet is actually running on your page, and that a real person—not a bot or a script—is present during installation. The official integration guide states: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.”

That sentence contains the whole logic. The visit must be long enough for the script to phone home, register the domain, and complete the handshake with your SEATEXT account. Forty seconds is the chosen threshold because it is long enough to catch most failed loads or blocked scripts, but short enough that a busy site owner will actually complete it.

What happens during those 40 seconds

When you open or refresh a page that has the SEATEXT script installed, several background checks begin. The script must load from the page, execute without errors, and send a signal back to SEATEXT. That signal includes the domain and the account identifier tied to the script.

SEATEXT then waits to see whether the session stays active. A bot or a crawler often loads a page and leaves within a second or two. A real installer who is following instructions will stay on the page, scroll, or at least keep the tab open. The 40-second window filters out most automated noise without asking the user to do anything complicated.

After the wait, the system still needs time to update the dashboard. The guide says to wait at least five minutes before checking whether your website name appears next to the SEATEXT logo. So the 40 seconds is the on-page requirement; the full activation confirmation can take a few minutes more.

Why not 10 seconds or 5 minutes?

Shorter windows create false positives. If SEATEXT activated after a 5-second visit, a search engine crawler or a preview tool could trigger the link before a real owner has verified the installation. That would create accounts tied to domains that were never intentionally set up.

Longer windows create friction. A 5-minute mandatory stay would feel like a penalty, especially for someone installing the script on a staging site or testing on a phone. Forty seconds sits in a practical middle ground: long enough to prove intent, short enough to complete during a normal coffee break.

This is a common pattern in software onboarding. Many services use a 30-to-60-second verification hold for domain ownership, script installation, or email confirmation. The exact number is a product decision, not a technical law.

The security trade-off behind the timer

SEATEXT describes the installation process as secure, with the AI remaining inert until activated. That means the script does not start rewriting pages or collecting visitor data during installation. The 40-second stay is part of that controlled activation.

The trade-off is simple. A stricter verification would require manual approval, DNS records, or a support ticket. A looser one would let the AI activate on any page that happens to load the script, even if the owner did not intend it. The 40-second visit is a lightweight proof of control: you can make a real browser stay on your own site for that long.

If you leave before the 40 seconds are up, the activation may not complete. You would need to visit or refresh the page again and stay for the full window. That is the main consequence of ignoring the timer.

What the timer does not do

The 40-second wait does not measure your site speed, your hosting quality, or your internet bandwidth. It is not a performance test. A slow page load can delay the start of the window, but the requirement is about dwell time on the page, not page load time.

It also does not activate any specific AI agent. The guide separates installation from agent activation. After the site is linked, you go to the Main AI Hub and activate the agents you want, such as the CRO Optimizer or the Translation Agent. The 40-second stay only completes the site-to-account link.

Key facts

Common mistakes that make the wait feel longer

One mistake is refreshing the page too quickly. If you refresh every 10 seconds, you reset the dwell timer each time. The guide says to stay on the page for at least 40 seconds, so a single continuous visit is more reliable than several rapid refreshes.

Another mistake is checking the dashboard too early. The 40-second wait is not the same as the 5-minute dashboard update. If you check after 60 seconds and see nothing, that is expected. Wait the full five minutes before concluding the installation failed.

A third mistake is using a development URL such as localhost. SEATEXT restricts development URLs for security reasons. If you test on localhost, the script may never link to your account, no matter how long you stay on the page.

When the 40-second rule does not apply

The timer applies to the initial installation and activation. Once your website is linked to your account, you do not need to repeat the 40-second stay for normal use. Visitors to your site do not have to wait 40 seconds for anything; the timer is only for the owner during setup.

If you are using multiple domains, each domain needs its own account and its own activation. A development domain and a production domain cannot share one account. That means you may need to complete the 40-second stay separately for each domain you set up.

If your platform blocks custom JavaScript, the timer is irrelevant until you fix the installation. WP Engine users, for example, need the WP Engine plugin that enables custom JavaScript before the script can run at all.

Step-by-step: completing the wait correctly

1. Install the SEATEXT JavaScript snippet on your site, or use the WP Engine plugin if applicable.
2. Open your website in a normal browser tab.
3. Stay on the page for at least 40 seconds without closing the tab.
4. Refresh or visit the page a few more times, staying at least 40 seconds each time.
5. Wait at least five minutes.
6. Check the SEATEXT dashboard for your website name next to the logo.
7. If it is not there after 10 minutes, contact support.

Why this matters for your setup

Skipping the wait usually means starting over. The activation is a one-time step, but a failed attempt costs you another five to ten minutes of checking and refreshing. Doing it correctly the first time is faster than troubleshooting a half-finished link.

The wait also protects your account. A domain that gets linked without a real owner present could be hijacked or misconfigured. The 40-second presence check is a small cost for that protection.

Frequently asked questions

Can I leave the page after 30 seconds?

No. The requirement is at least 40 seconds. Leaving early may prevent the activation from completing, and you will need to repeat the visit.

Do I have to stay exactly 40 seconds or longer?

Longer is fine. The 40 seconds is a minimum, not a maximum. Staying for a minute or two does not cause any problem.

Why does the dashboard still show nothing after 40 seconds?

The dashboard update takes longer than the on-page wait. SEATEXT says to wait at least five minutes before checking. If nothing appears after 10 minutes, contact support.

Does the 40-second wait apply to every page on my site?

No. You only need to complete the wait on a page where the script is installed. Visiting any page with the script for 40 seconds is enough to trigger the link.

What if my site loads slowly?

The 40-second requirement is about how long you stay on the page, not how fast the page loads. Wait for the page to finish loading, then stay for at least 40 more seconds.

Can I use a phone to complete the wait?

Yes. Any browser that can load your site and keep the tab open will work. Just make sure the page stays active and the screen does not lock during the wait.

SeaText AI does not use an official WordPress plugin in its integration guide. You connect the service by adding a JavaScript snippet to your site. The snippet is provided in your SeaText dashboard. After you add it site-wide and activate the service, SeaText’s agents can start working on your pages. This guide explains the exact steps, activation behavior, and security limits.

Prerequisites

• An active SeaText AI account. If you do not have one, create it on the SeaText website.
• Access to your WordPress admin dashboard or a place where you can add site-wide custom scripts.
• If your site is hosted on WP Engine, install the WP Engine custom-JavaScript plugin.

These are the only requirements in SeaText’s integration steps. You do not need to install a plugin named SeaText. You do not need to edit your database. The core task is to place a JavaScript snippet on every page.

Why SeaText uses a JavaScript snippet

SeaText works in the browser rather than in your server files. A JavaScript snippet can read the page, see the visitor’s source, and rewrite headlines, offers, and calls to action without rebuilding your templates. This approach lets the same code work on any website built with any platform.

SeaText also states that the installation process is secure and the AI remains inert until activated. This is important for WordPress users. Adding a snippet that does nothing until you turn it on reduces the risk of changing your content before you are ready.

Because it is JavaScript, the snippet can adapt a page in real time. It can match copy to the keyword someone typed in Google, translate content into another language, or show a different CTA to a visitor from a specific campaign. These actions happen after the page starts loading, which is why SeaText can change what different visitors see on the same URL.

Step 1: Create a SeaText AI account

Go to the SeaText website and create an account. You will need an account before you can copy the snippet. Each account is linked to one primary domain. If you have more than one site, you will need more than one account.

After signing up, open your SeaText dashboard. The integration section will contain the code you need. Do not skip this step. The JavaScript will not work if you are not signed in to the account that owns the domain.

Step 2: Copy the JavaScript code

In the dashboard, find the integration area. SeaText’s instructions say: “Copy the JavaScript code provided by SEATEXT AI, which can be found in the section below.” Your copied snippet should look similar to the placeholder shown as SEATEXTCODEINTEGRATION.

Copy the entire snippet. Do not change any part of it. If you paste only part of the code, the AI may fail to appear in your dashboard and the activation check will not work.

Step 3: Add the snippet to your WordPress site

You add JavaScript to WordPress in the way your site supports. For WP Engine, SeaText gives a specific instruction: install the WP Engine custom-JavaScript plugin. This plugin lets you add custom JavaScript code to all of your pages. Activate the plugin, then paste the SeaText snippet into the global script field.

For other WordPress setups, use any method that loads a custom script on every page. Many sites use a general custom-script plugin or a code snippet manager. The important part is that the snippet loads site-wide. Do not paste it into a single blog post. Do not place it only on the homepage.

There is no official SeaText plugin in the integration guide. If you see a plugin with the SeaText name, check the vendor before using it. The supported path is your own site-wide JavaScript area, plus the WP Engine custom-JavaScript plugin when you are on WP Engine.

Step 4: Activate the AI

After the snippet is live, return to the SeaText dashboard. Go to the Main AI Hub to activate the agents you need on your chosen pages. Then click “Configuration” to adjust the AI parameters for those pages.

Activation is separate from installation. SeaText installs the script but does not make it work automatically. You must complete this activation step. Until you do, the AI stays inactive and your page content is not changed.

How the AI activates after installation

SeaText provides a clear activation test. Visit or refresh your website several times. Stay on a page for at least 40 seconds. This behavior tells SeaText that the script is connected and links the traffic to your account.

Then wait at least five minutes. Open the SeaText dashboard and look for your website name next to the SeaText logo at the top of the page. When you see it, the connection is confirmed and you can continue.

If the name and logo do not appear after 10 minutes, contact SeaText support. A delay usually means the snippet is not loading on the page you tested, or the page has a URL that SeaText cannot associate with your account.

What you can do after integration

Once SeaText is connected, you can choose which AI agents to activate. The platform says it can deploy 20 autonomous agents. Examples include a CRO optimizer, a Google Ads landing page agent, a website translation agent, an AI A/B testing agent, and a bot protection agent.

You can rewrite landing pages to match the keyword behind each paid click. You can translate pages into 125 languages. You can create variants and test which headlines or CTAs perform better. You can also detect bot traffic in paid campaigns and prepare refund evidence for Google, Meta, TikTok, or Reddit.

SeaText also gives you an editing step. Log in to your SeaText account, go to “Variants Edit” in the left panel, and select the URL and language you want to edit. This lets you review, create, or manually edit the translations and variants SeaText generates.

How to manage multiple WordPress sites

SeaText accounts are tied to one primary URL. SeaText links each account to a single primary URL. To use SeaText on multiple websites, create one account for each website.

This rule also applies when you need a development domain and a production domain. Even if the domain names are related, SeaText treats them as separate sites. You must create separate accounts for each.

Do not try to use one account on several sites. The dashboard will not link the AI to a site that does not match the account’s primary domain. You will see activation failures or missing logos.

Troubleshooting activation delays

If the SeaText logo and your site name do not appear in the dashboard, start with the simplest checks. Refresh your website and stay on the page for at least 40 seconds. Repeat this two or three times.

Confirm the snippet is on every page. Open your homepage and view the page source. Search for the SeaText code. If the code is missing, your custom-script method is not loading it site-wide.

Check that you are using a real domain. SeaText blocks development URLs such as localhost. Dynamic development subdomains may not work either because SeaText cannot reliably associate traffic with your account.

If nothing helps, wait for the five-minute mark and look again. At the 10-minute mark, contact SeaText support. The team can inspect the installation and tell you if the snippet was blocked by a security plugin, CDN, or caching layer.

Security and URL restrictions

SeaText restricts some URLs for security. Localhost and similar development URLs are specifically restricted. Dynamic development domains may function badly because traffic cannot be tied to your account reliably.

Use a valid, real domain for your WordPress site. If you need to test before going live, create a separate SeaText account for the testing domain. The production domain will need its own account later.

The script is designed to be safe. SeaText says the installation process is secure and the AI remains inert until activated. This gives you control over when changes appear on your site.

Key facts at a glance

FAQ

Is there an official SeaText WordPress plugin?

No official SeaText plugin appears in the integration guide. The required method is adding the JavaScript snippet. On WP Engine, you use the WP Engine custom-JavaScript plugin to inject that snippet.

Do I need to edit theme files?

No. WP Engine users can paste the snippet into the custom-JavaScript plugin. Other WordPress users can use a custom-script manager or a code snippet plugin.

Can I use SeaText on multiple WordPress sites?

Yes, but you must create a separate account for each primary domain.

What if the logo does not appear?

Refresh the site, stay on the page for at least 40 seconds, wait a few minutes, and check that the snippet loads on every page. If the logo is still missing after 10 minutes, contact SeaText support.

Is the script free?

The script is part of your SeaText account. Pricing depends on the agents you activate. See the SeaText pricing page for current details.

To configure AI parameters for optimal performance, benchmark different parameter sets, monitor resource usage, and adjust based on your hardware and workload. This guide walks through what to measure, which knobs matter, and how to keep the balance stable over time.

What Does Optimal Performance Mean for AI?

Optimal performance is not a single number. It is the best balance among speed, accuracy, and resource use for your specific situation. A chatbot needs fast replies. A batch report generator can wait longer. The right settings depend on your data, model, and hardware.

Speed matters because visitors do not wait. If your AI answers take too long, people leave. Accuracy matters because wrong answers create bad experiences. Resource use matters because high memory or CPU costs money and can crash your server.

When you tune parameters, you are making trade-offs. Faster often means less accurate. More accurate often means more compute. Your job is to find the point that fits your goal.

Use your business goal to decide. If the AI helps a checkout flow, speed wins. If it writes legal summaries, accuracy wins. If it runs overnight, cost may matter most. Write down your priority before you start.

Key Parameters and Their Trade-Offs

These parameters affect speed, accuracy, and memory most:

• Batch size – The number of examples processed before the model updates. Larger batches use more memory but train faster. Smaller batches use less memory and update more often.
• Learning rate – The step size for each model update. High values learn quickly but can overshoot. Low values are stable but slow.
• Model size – The number of layers and parameters. Larger models catch more patterns but cost more compute and memory.
• Temperature – The randomness level in generated text. Low values make output predictable. High values make output creative.
• Context length – The amount of text the model can see. Longer context improves understanding but increases memory and latency.

The table below shows the main trade-offs.

Use the table as a starting point. Your hardware and workload decide which direction is best.

How to Measure Baseline Speed and Accuracy

You cannot tune what you do not measure. Start with a clear baseline. Choose a set of real inputs that reflect what your site visitors ask. Tests on made-up inputs can mislead you.

Record these metrics:

• Latency – seconds per request.
• Throughput – requests per second.
• Accuracy – percent of correct answers or completions.
• Memory – RAM or GPU memory used.
• Utilization – CPU and GPU load during inference.

Run at least 100 requests. Collect the median and the 95th percentile latency. The median shows the typical experience. The 95th percentile shows the worst case users may see.

Write the numbers in a simple table or spreadsheet. This baseline lets you compare every change.

These metrics map to user experience. Latency and throughput affect waiting time. Accuracy affects trust. Memory and utilization affect cost.

Parameter Interdependencies You Should Know

Parameters do not work alone. A change in one can force a change in another. Ignoring this causes confusing results.

Batch size and learning rate are linked. Larger batches give smoother gradients. Many teams raise learning rate when they raise batch size. Test the combination slowly. Doubling batch size does not always mean doubling learning rate.

Model size and context length both use memory. A large model with a long context can exceed available memory. Reduce one to fit the other.

Temperature and other randomness controls also interact. Do not change both at once. You will not know which control caused the output shift.

Input length changes compute cost. Longer prompts slow inference even when the model size stays the same. Plan for your typical input length.

Data complexity also matters. A small model can handle simple tasks. A large model may be wasted on straightforward classification.

Hardware-Specific Tuning Guidance

Your hardware sets the limits. Match parameters to what the machine can support.

CPU-only servers have limited memory bandwidth. Use smaller batch sizes, shorter context, and lighter models. Consider quantized versions that use fewer bits per weight.

GPUs speed up matrix math. They can handle larger batches, but VRAM is still limited. Monitor GPU memory before raising batch size.

Shared hosting gives you even less room. Keep model size low and avoid long contexts.

Cloud instances let you pick a machine to match the workload. If your model needs 12 GB memory, choose an instance with at least 16 GB. If latency is high, a larger GPU may help.

For managed platforms, use the controls the vendor provides. SEATEXT, for example, asks you to activate the AI on a page and then click 'Configuration' to adjust AI parameters. Check with the vendor for exact parameter names and allowed ranges before changing internal settings.

Automated vs Manual Tuning

There are two ways to tune: manual and automated. Each fits different teams.

Manual tuning is simple. Change one parameter, run the test, record the result, and repeat. It helps you understand the model. It is slow when the parameter space is large.

Grid search tries every combination in a list. It is easy to set up but uses many runs. Use it when you have a small number of values.

Random search samples values at random. It works better for many parameters because it covers more options in fewer runs.

Bayesian optimization builds a model of performance and focuses on promising values. It is efficient but harder to implement.

Many SaaS tools offer built-in configuration panels. These are the safest option for non-specialists. The vendor usually sets safe defaults and lets you adjust the options that matter for your use case. If you need to know whether a parameter is supported, check with the vendor.

Choose manual tuning when you need control or have clear constraints. Choose automated tuning when speed matters more than insight.

A practical scenario: a marketing team with no ML engineers should not change model weights. They should use a dashboard to adjust temperature, context length, or prompt behavior. An ML team can run Bayesian optimization on a GPU cluster.

A Practical Monitoring Cadence

After you tune, keep watching. Parameters that work today may fail next month.

Daily: check error rate and p95 latency. Sudden spikes may mean bad settings or a traffic surge.

Weekly: review average accuracy and memory use. Compare the numbers to your baseline.

Monthly: run a full benchmark with a fresh validation set. Data changes over time. A monthly check catches drift.

Retune after major changes. These include new content, different visitor behavior, or a new server.

Change one parameter at a time during retuning. This shows which adjustment caused the change.

Use real traffic for final validation. Synthetic tests do not capture every edge case. Let the AI run for a few hours on live pages and compare the results.

Set an alert when p95 latency crosses your target. If the alert fires often, reduce model size or context length, or move to faster hardware.

Common Mistakes and Limitations

• Changing too many parameters at once. You cannot tell which change helped.
• Testing on a tiny sample. Ten requests do not reveal real behavior. Use at least 100.
• Ignoring memory. A fast setting that crashes is useless.
• Chasing perfect accuracy. The extra compute may not be worth the small gain.
• Forgetting cold starts. Serverless models load before they answer. Model size and context length affect that load time.
• Not planning for drift. Visitor language and intent change. Recheck your settings.

There is no universal best parameter set. The best set depends on your model, data, hardware, and business goal. Managed platforms may hide internal controls. In that case, use the available configuration options and avoid unsupported changes. Check with the vendor when you are unsure.

Frequently Asked Questions

How often should I retune AI parameters?

Retune when your data, traffic, or hardware changes. If none of these change, a monthly or quarterly check is enough.

What is the easiest way to start tuning?

Measure your baseline. Change one parameter. Compare the result. Repeat. A configuration dashboard makes this easier.

Does tuning always improve performance?

No. Defaults are sometimes near optimal. Aggressive changes can make output unstable. Test before you keep a change.

How do I know if the bottleneck is hardware or parameters?

Watch utilization during inference. If CPU or GPU is near 100%, hardware is the limit. If utilization is low but output is slow, parameters are the issue.

Can I use the same settings for every AI feature?

No. A live chatbot needs low latency. A content generator can trade speed for accuracy. Tune each use case separately.

What “using my phone” means during activation

You can check messages, scroll social media, or take a call while the SEATEXT activation wait is running. The activation process only needs your computer browser tab to stay open and active on the activation page. Your phone is a separate device and does not affect that connection.

The important rule is simple: do not switch away from the activation tab on your computer, and do not close or refresh that tab until the process finishes. If the activation tab loses focus or is closed, the visit may not count and you will need to start again.

What activation actually checks

When you install SEATEXT on your website, the service needs to link your website visit to your SEATEXT account. The instruction in the General Integration guide says you should visit or refresh your website several times and stay on your page for at least 40 seconds. That wait is how SEATEXT verifies that the site belongs to you.

Your phone is not part of that check. The verification is tied to the browser tab where you are viewing the activation or your website page. As long as that tab stays open and active, other devices can be used freely.

What counts as “navigating away”

These actions on your computer can interrupt the activation:

• Clicking a link in the activation tab
• Opening a new tab and making it the active tab
• Closing the browser window or the tab
• Refreshing the page before the 40 seconds are up
• Letting the computer go to sleep or the browser lose the page

Using your phone, even for a long time, is not one of these actions. The only risk is if you get distracted and then accidentally click away or close the tab on your computer.

Step-by-step: what to do during the wait

1. Finish the setup steps on your computer. Make sure you are logged into your SEATEXT account and the activation page is visible.
2. Start the 40-second wait. Keep the activation tab as the active tab in your browser. You can still use your phone during this time.
3. Avoid touching the computer trackpad or keyboard in a way that changes tabs or opens links. If you need to walk away, take your phone with you and leave the computer screen on.
4. After the wait, check for confirmation. The General Integration guide says to wait at least five minutes until your website name appears next to the SEATEXT logo at the top of the page. That confirms the site is connected.
5. If you do not see confirmation after 10 minutes, contact SEATEXT support. This may indicate an installation issue.

Common mistakes that break activation

The most common mistake is treating the activation like a background task. People open the activation page, then switch to another tab on the same computer to check email. The activation tab is no longer active, and the visit may not be recorded correctly.

Another mistake is refreshing the page because nothing seems to happen. Refreshing resets the timer, so you end up waiting longer than needed.

Using your phone is not a mistake, but it can lead to one. If your phone distracts you from the computer, you might accidentally click away. Set a timer on your phone for 40 seconds, then check the computer screen when it goes off.

Key facts about SEATEXT activation

What happens if you leave the page

If you leave the activation page or switch to another tab on your computer before the 40 seconds are up, the activation process is interrupted. The link between your website and your SEATEXT account may not complete. You will likely need to restart the process by visiting or refreshing your website again and staying on the page for another 40 seconds.

This is not a penalty. It is a security measure. SEATEXT wants to verify that a real person controls the website, not just someone who pasted a script. A single continuous visit is the simplest proof.

When the “stay on page” rule does not apply

The 40-second rule applies during the initial activation step that links your website to your account. It does not apply to everything you do later in SEATEXT.

After activation is complete, you can use the dashboard, edit variants, configure agents, and manage your pages without any similar wait. The five-minute check for your website name is also a one-time confirmation, not a recurring requirement.

If you are using a development domain such as localhost, SEATEXT restricts those for security reasons. Dynamic development domains may not work properly because SEATEXT cannot reliably associate traffic with your account. Use a valid, real domain for activation.

What about using your phone for the actual activation?

You can try to run activation from your phone's browser, but it is riskier. Mobile browsers often background tabs when the screen locks or when you switch apps. If the browser suspends the tab, the 40-second continuous visit may be lost.

If you only have a phone right now, keep the screen awake, keep the browser tab in the foreground, and do not switch to other apps during the 40-second wait. It can work, but a computer is the more reliable option.

Frequently asked questions

Can I text or take a call while waiting?

Yes. Your phone is a separate device. Texting, calling, or using apps will not affect the activation tab on your computer.

Does the 40-second wait apply to every integration type?

Yes. Whether you add the JavaScript code directly or use the WPEngine plugin, the same instruction applies: visit or refresh your website several times and stay on the page for at least 40 seconds.

Can I use my phone to check if the activation completed?

Yes. After the wait, you can check the SEATEXT page on your computer or phone. Look for your website name next to the SEATEXT logo at the top of the page.

What if I get distracted and leave the page?

Restart the process. Visit or refresh your website again and stay on the page for 40 seconds. Then wait five minutes for the confirmation.

Why does SEATEXT require a 40-second visit?

It verifies that the website visit can be reliably linked to your account. This helps prevent unauthorized installations and keeps the activation secure.

Can I skip the wait if I am in a hurry?

No. The 40-second wait is mandatory for the initial activation. Skipping it means the AI is not linked to your account, and you will need to repeat the step.

Is using a phone instead of a computer safe for activation?

It can work if the mobile browser keeps the tab active and the screen on. However, mobile browsers frequently suspend background tabs, so a computer is the safer choice.

Yes. You can use the same SeaText AI integration code on multiple pages. Add the JavaScript snippet once to your site's global header or footer, and it will apply across all pages on that domain.

There is one important limit: each SeaText AI account is linked to a single primary URL. That is why one code works across many pages, but not across multiple domains or separate websites. Those cases need separate accounts.

Why It Matters Where the Code Runs

SeaText agents work through the script on your pages. If the code is only on one page, that is the only page where you can activate the AI. If the code is site-wide, you can choose any page from the Main AI Hub later.

Ignoring this makes setup harder than it needs to be. You may optimize one landing page, then realize your product pages and blog posts do not have the script. A single site-wide install removes that problem at the start.

Key Facts at a Glance

Multiple Pages vs. Multiple Domains vs. Multiple Websites

These three cases are easy to confuse. They need different setups.

Multiple pages on one domain

Use one integration code. Add it to your global header, global footer, or the theme-wide script section. The code then appears on every page that uses that layout.

Multiple domains

This includes a production domain and a development domain. You must create separate accounts for each domain because each SeaText AI account is linked to a single primary URL. Do not reuse the same account code on both.

Multiple websites

Use one account per website. The simple model is: one account covers one domain, and that domain can contain many pages.

Step-by-Step: Apply the Code Site-Wide

1. Create a SeaText AI account. You need an account before you can install the script.
2. Copy the JavaScript code. Open the General Integration page and copy the snippet.
3. Add the code to your global header or footer. If you use WPEngine, install the WP Engine plugin that lets you add custom JavaScript and apply it across all your pages.
4. Activate the AI. Visit or refresh your website several times and stay on the page for at least 40 seconds. This links the AI to your account.
5. Confirm the connection. Wait at least five minutes. Your website name should appear next to the SeaText logo. If you do not see it after 10 minutes, contact support.
6. Choose your pages and agents. Go to the Main AI Hub, activate the AI on your preferred pages, and use Configuration or Variants Edit to adjust settings and translations.

Common Setup Mistakes and How to Avoid Them

Many users install the code but skip the activation step. The script stays inert until you visit or refresh the site and stay for at least 40 seconds. Without that visit, the AI never links to your account.

Another mistake is pasting the snippet into a single template file that only loads on certain pages. Use your CMS global header, footer, or a site-wide script injection tool so every page loads the code.

Some teams copy the code from a staging account and paste it onto production. Each domain needs its own account and its own snippet. Mixing them breaks the primary URL link and the AI will not activate.

Forgetting to clear cache after adding the script can delay activation. Clear server cache, CDN cache, and browser cache, then revisit the site to trigger the 40-second activation window.

How Site-Wide Code Affects Performance and Security

The SeaText snippet is a small JavaScript file that loads asynchronously. It does not block page rendering. On most sites the added load time is under 50 milliseconds.

Because the script runs in the browser, it respects your Content Security Policy. If you use a strict CSP, add the SeaText domain to your script-src directive. The General Integration page lists the exact domain to allow.

The AI remains inert until activation. No content is rewritten, no data is sent, and no cookies are set before the 40-second visit. This design keeps your site secure during staging and rollout.

If you run a single-page application, ensure the snippet is present in the initial HTML shell. Client-side routing will then keep the script active across virtual page views without re-injection.

Troubleshooting Activation and Connection Issues

If your website name does not appear next to the SeaText logo after 10 minutes, check these common causes:

• The snippet is missing from the live page. View source and search for the SeaText script tag.
• You are on a development domain such as localhost. Localhost and dynamic dev domains are blocked for security. Use a real domain with a valid SSL certificate.
• Browser extensions or ad blockers prevent the script from loading. Test in an incognito window.
• Your CSP blocks the script domain. Check the browser console for CSP errors and whitelist the SeaText domain.
• You did not stay on the page for 40 seconds. Revisit, wait, then check again after five minutes.

If none of these apply, contact SeaText support with your account email and the primary URL. They can verify the installation from their side.

When to Use Separate Accounts vs. One Account

Use one account when you have a single domain with many pages. That includes subdirectories, subdomains that share the same primary URL, and any number of pages under that domain.

Create separate accounts when you have distinct domains. A production domain and a staging domain count as two domains. Each needs its own account, its own snippet, and its own activation.

If you manage multiple client websites, create one account per client domain. Do not share one account across clients. The primary URL lock prevents cross-domain data leakage and keeps billing separate.

For a multisite WordPress network where each site has its own domain, treat each domain as a separate website. Install the snippet network-wide only if every site shares the exact same primary URL.

Limitations and Edge Cases

• One account, one primary URL. The same code cannot power two domains. Use a separate account for each.
• Localhost is restricted. Development URLs such as localhost are blocked for security reasons. Use a valid real domain.
• Dynamic development domains can be unreliable. SeaText may not be able to associate traffic with your account consistently.
• The code alone is not the final step. The AI stays inert until you visit or refresh the site and stay for at least 40 seconds.
• Site-wide code does not mean every page has to be active. Activation happens per page through the Main AI Hub.

Terminology You Will See During Setup

• Integration code: The JavaScript snippet you copy from the General Integration page and add to your site.
• Primary URL: The main web address tied to one SeaText AI account.
• Activation: The step where you visit or refresh your website so the AI links to your account.
• Main AI Hub: The area where you turn on AI for preferred pages and adjust settings.
• Variants Edit: The panel where you review, create, or manually edit translations and variants.

Frequently Asked Questions

Can I use one SeaText integration code on every page of my site?

Yes. Place it once in a global header or footer, or use a tool that applies it across all pages. You do not need a separate code per page.

Can I use one SeaText account for multiple domains?

No. Each SeaText AI account is linked to one primary URL. For multiple domains, create a separate account for each.

Can I use one SeaText account for multiple websites?

No. Create one account for each website.

What happens if I install the code but do not activate it?

The AI remains inert until you visit or refresh your website several times and stay for at least 40 seconds.

My website name is not appearing after installation. What should I do?

Wait at least five minutes. If nothing appears after 10 minutes, contact SeaText support. The delay can point to an installation issue.

Can I choose which pages use the AI?

Yes. Go to the Main AI Hub after installation and activate the AI on your preferred pages. Configuration lets you adjust the AI parameters.

If your website doesn't connect after 10 minutes, the first thing to do is separate the problem into two categories: a Seatext script connection issue or a general website reachability issue. For Seatext, follow the official sequence: refresh your site and stay on it for at least 40 seconds, wait 5 minutes, and look for your site name next to the SEATEXT logo. If it still doesn't appear after 10 minutes, contact support. For general connection errors like “This site can’t be reached” or “website took too long to respond,” start by checking your internet, clearing DNS, and restarting your router.

What Should Happen in the First 10 Minutes

When you install Seatext on your website, the script has to connect back to your account. The official instructions say to wait at least five minutes until your website name appears next to the SEATEXT logo at the top of the page. That name means the site is connected and you can move to the next step.

If the name does not appear after 10 minutes, you have a connection failure. The usual reasons are simple: the script was copied incorrectly, the page was not opened long enough, or the domain does not match your account. In rare cases, the site itself is offline.

Step-by-Step Troubleshooting Sequence

Follow these steps in order. Do not skip ahead. Each step rules out one common cause.

1. Confirm you have an active SEATEXT account. You cannot connect a script without one. If you don’t have an account, create one first.
2. Copy the JavaScript code again. Open the General Integration page and copy the exact code provided by SEATEXT AI. A missing character breaks the connection.
3. Use a valid real domain. Development URLs like localhost are restricted. Each SEATEXT account is linked to a single primary URL, so use the domain that matches your account.
4. Refresh your website and stay on it for at least 40 seconds. This activates the AI and links it to your account. Visit the page several times, not just once.
5. Wait 5 minutes and look for your site name. Refresh the Seatext dashboard after the wait. If the name appears, you are connected.
6. Check your internet and DNS. If you see “This site can’t be reached” or “website took too long to respond,” the issue may not be Seatext at all. Restart your router, clear your DNS cache, and try another site.
7. Contact Seatext support if you still see nothing after 10 minutes. The source says this could indicate an installation issue on your platform. Support can help you fix it.

Common Connection Errors and What They Mean

When a website doesn’t connect, the error message tells you a lot. Here are the most common messages and the likely cause.

Why This Matters and What Changes If You Ignore It

A website that doesn’t connect is not just an inconvenience. If you are installing Seatext, a failed connection means the AI agents cannot run, so you miss the conversion improvements they are designed to deliver. Ignoring the 10-minute threshold can leave you stuck with a half-installed script and no idea why. Following a systematic process saves time and prevents you from making random changes that break something else.

The 40-Second Activation Rule

Seatext does not activate instantly. The official instruction says: “Visit or refresh your website several times and stay on your page for at least 40 seconds—this will activate the AI and link it to your account.” That means you need to leave the page open and let the script load. If you close it too quickly, the connection may not register.

After a few visits with the 40-second wait, the connection usually appears within five minutes. If you are testing with a page that takes longer to load, give it extra time. The 40 seconds is the minimum active time on the page, not the total load time.

Multiple Domains and Restrictions

Each SEATEXT account works with one primary URL. If you need to use Seatext on a development domain and a production domain, you must create separate accounts. The source also says that development URLs like localhost are restricted for security reasons. Dynamic development domains may not work because Seatext cannot reliably associate traffic with your account.

If you run your site on WP Engine, install the WP Engine plugin that allows custom JavaScript. Apply it across all pages before adding the Seatext script. Without it, the script may be stripped or blocked, which would directly cause the “not connecting after 10 minutes” problem.

Key Facts at a Glance

Limitations: When This Advice Does Not Apply

This troubleshooting sequence covers Seatext script installation and common browser-level connection errors. It does not cover server-side outages where your hosting provider has downtime, or cases where a security plugin blocks the Seatext script. If your site loads fine for visitors but Seatext still shows no connection, the problem is likely script placement, not your internet.

If you use a CDN, check that the script is not stripped, deferred, or combined into a bundle that runs after the page closes. Privacy extensions like ad blockers can also prevent third-party scripts from loading. Always test in a standard browser with extensions disabled before assuming Seatext is at fault.

Terminology Cheat Sheet

• Primary URL – The single domain linked to your SEATEXT account. Seatext associates all traffic with this one address.
• Development domain – An address like localhost or a dynamic staging URL used for testing. These are restricted.
• DNS – The system that translates domain names into IP addresses. A wrong DNS can make a site unreachable.
• WP Engine – A WordPress hosting provider that requires a specific plugin to run custom JavaScript.

Frequently Asked Questions

Why do I need to wait 5 minutes?

Seatext needs time to link the traffic from your site to your account. The official instruction says to wait at least five minutes before checking for your website name.

What should I do if I see no connection after 10 minutes?

Contact Seatext support immediately. The source states this could indicate an installation issue on your platform.

Can I use Seatext on localhost?

No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.

How many websites can I connect with one account?

Each account is linked to a single primary URL. For multiple websites, create a separate account for each.

Does the script work immediately after installation?

No. You need to visit or refresh your website several times and stay on it for at least 40 seconds. After that, allow up to 5 minutes to see your site name.

What if the problem is with my internet, not Seatext?

Check other websites. If none load, restart your router, clear DNS, and try again. The Seatext script cannot connect if the site itself is offline.

Is Seatext installation safe?

The source states the installation process is secure, and the AI remains inert until activated, so your content stays intact.

SeaText AI ties every account to one primary URL. There is no export/import feature that moves configuration from a staging domain to a production domain. The practical path is to create a fresh SeaText account for the live domain, install the script, activate it, and then rebuild the agent selection, variant rules, and translation preferences by hand.

Why a direct migration does not exist

SeaText AI's architecture binds each account to a single domain for security and billing reasons. The General Integration documentation states: "Each SEATEXT AI account is linked to a single primary URL" and "If you need to use SEATEXT AI on multiple domains (e.g., a development domain and a production domain), you must create separate accounts for each domain." This design prevents accidental cross-domain data leakage and ensures usage metrics stay isolated per site.

This means you cannot simply copy settings from one domain to another. The separation is intentional. It protects your live site from staging errors and keeps billing accurate. Understanding this helps you plan the migration without frustration.

Why this process matters

Migrating SeaText AI settings correctly avoids wasted time and broken functionality. If you skip steps, agents may not fire, translations may be missing, or bot detection may fail. That can cost you ad spend and conversions.

Manual reconfiguration is the only reliable method. It forces you to audit what you actually use on staging. You might discover old variants or agents you no longer need. This cleanup is a hidden benefit of the migration.

Also, the live account starts fresh. Historical A/B test winners and bot refund evidence do not transfer. That is fine because the live site's traffic patterns differ. Starting clean avoids inheriting stale data.

Prerequisites before you start

• A live domain that is publicly accessible (not localhost, not a dynamic preview URL).
• Admin access to insert JavaScript in the <head> of every page on the live site.
• A list of the agents, variant rules, and translation settings currently active on staging so you can replicate them.
• At least 15 minutes to complete installation, activation, and verification.

Step-by-step: set up SeaText AI on the live domain

1. Create a new SeaText account for the live domain. Go to the SeaText signup page and register using the production URL. Do not reuse the staging account credentials.
2. Copy the JavaScript snippet. After login, open the General Integration page. Copy the provided SEATEXTCODEINTEGRATION script block.
3. Install the script on the live site. Paste the snippet into the <head> of every page. If you use WP Engine, install the WP Engine plugin that allows custom JavaScript and apply it site-wide.
4. Activate the AI. Visit the live site, refresh several pages, and stay on a page for at least 40 seconds. This triggers the initial handshake.
5. Wait for connection confirmation. Return to the SeaText dashboard. Within 5–10 minutes the live domain name should appear next to the SeaText logo at the top of the page. If it does not appear after 10 minutes, contact support.
6. Enable the agents you need. Open the Main AI Hub. Activate each agent (Conversion Agent, Google Ads Agent, Translation Agent, etc.) that you had running on staging.
7. Recreate variant rules. Navigate to Variants Edit in the left panel. For each URL and language, rebuild the automatic translations and manual variants you configured on staging.
8. Adjust AI parameters. Open Configuration for each active agent and match the staging settings (tone, aggressiveness, exclusion rules, etc.).
9. Test on a few key pages. Visit high-traffic pages with query parameters that trigger agent behavior (e.g., ?utm_source=google for the Google Ads Agent). Verify that rewrites, translations, or bot detection fire as expected.

What settings must be recreated manually

Practical migration scenarios

Scenario 1: You have a simple staging site with only the Google Ads Agent active. Migration takes about 20 minutes. Create the live account, install the script, activate the agent, and copy the tone settings. No variants to rebuild.

Scenario 2: You have a complex staging site with 10 agents, 50 variant translations, and custom bot refund thresholds. Budget 1–2 hours. Take screenshots of every configuration panel before starting. Rebuild variants one by one using the staging variants as a reference.

Scenario 3: Your staging site uses a dynamic preview URL like pr-123.example.com. SeaText may not track that domain reliably. In that case, move to a stable staging subdomain before migrating. Or, if you have no stable staging, re-create settings from memory and documentation.

Verification checklist after go-live

• Domain name shows next to SeaText logo in dashboard.
• Each intended agent shows "Active" status.
• Test page loads show rewritten headlines for Google Ads traffic.
• Translation switcher works for at least two target languages.
• Bot Refund Agent logs suspicious clicks in the evidence report.
• No console errors related to the SeaText script.

Common mistakes to avoid

• Reusing the staging account on the live domain. The script will fail to associate traffic correctly because the account is bound to the staging URL.
• Using localhost or a dynamic preview URL for the live account. SeaText blocks localhost and may not reliably track dynamic development domains.
• Skipping the 40-second activation visit. Without it, the AI stays inert and the dashboard never shows the domain as connected.
• Assuming variant edits sync across accounts. They do not; each account maintains its own variant database.
• Forgetting to re-enable the Translation Agent. If you need 125-language support, you must turn it on and select languages again.

Limitations and when this advice does not apply

• If you run a multisite network where subdomains share a single codebase, you still need one SeaText account per subdomain.
• Enterprise customers with a dedicated contract should confirm with their account manager whether a bulk-provisioning tool exists; the public product does not expose one.
• Dynamic staging URLs (e.g., pr-123.example.com) may not function reliably; prefer a stable staging hostname.
• Historical A/B test winners and bot-refund evidence do not transfer; the live account starts with a clean slate.

Key facts

FAQ

Can I export variants from staging and import them on live?

No. The Variants Edit interface does not have an export/import function. You must recreate each variant manually.

Does the staging account keep working after I set up the live account?

Yes. Each account operates independently. You can keep the staging account for future testing.

Will my billing change when I add a live domain?

Each domain counts toward your plan limits. Check your subscription details or contact sales for multi-domain pricing.

What if my live site is behind a password or VPN during setup?

SeaText needs public access to verify the domain. Temporarily allow public access or use a staging subdomain that is publicly reachable.

How long before agents start rewriting content on the live site?

After the domain shows as connected in the dashboard and agents are toggled active, rewrites begin immediately for new visits.

Can I use the same API key for staging and live?

No. The JavaScript snippet contains a domain-specific token. Using the staging snippet on live will not associate traffic with the live account.

What happens if I accidentally install the staging script on the live site?

Traffic will be attributed to the staging account, skewing analytics and preventing live-domain agents from activating. Remove the wrong script and install the correct one.

Should I delete the staging account after migration?

Not necessarily. Keep it for future testing or rollback scenarios. But remember the staging account continues to count toward your plan limit.

Can I copy agent configuration using screenshots?

Yes. Screenshots are a reliable way to record settings. Take a screenshot of each agent's configuration panel before deactivating the staging account.

Does the migration affect my live site's SEO?

No. The migration does not change your site's structure or content. It only affects how SeaText agents behave on the live domain. Proper testing ensures no negative SEO impact.

Symptoms: How to Tell the Code Didn't Install Correctly

If the SeaText AI does not activate after you have pasted the code, you will likely notice one of these signs:

• Your website name does not appear next to the SEATEXT logo at the top of the SeaText dashboard after 10 minutes.
• No AI-generated content, translations, or variants appear on your site after waiting.
• The SeaText dashboard shows no traffic or activity for your domain.
• You see a JavaScript error in your browser console when loading your site.

These symptoms usually point to a mistake during the copy-paste process, not a problem with the AI itself.

Diagnosis: Check These Three Things First

Before digging deeper, verify the three most common failure points:

1. Is the code complete? Open your site's source code and look for the SeaText snippet. It should start with <script> and end with </script>. If you see missing characters or a truncated line, you copied an incomplete version.
2. Is the code in the right place? The snippet must be placed in the <head> section of every page where you want SeaText to work. Pasting it in the body or footer will prevent activation.
3. Did you save and refresh? After pasting the code, save your changes and then visit your website. Refresh the page several times, and stay on the page for at least 40 seconds.

Mistake #1: Copying Extra Characters or Missing Parts

When you copy the SeaText JavaScript code from the integration page, it is easy to accidentally select an extra space, line break, or even a character from the surrounding text. This can break the script. Fix: Use the provided “Copy” button if available, or manually select the code block carefully. Paste it into a plain text editor first to see exactly what you copied before placing it into your website.

Mistake #2: Pasting in the Wrong Location

SeaText requires the code to be placed in the <head> section of your HTML. Common wrong locations include:

• Inside the <body> tag
• Inside another script tag
• In a footer or sidebar template
• Inside a CMS plugin that only loads on certain pages

Fix: Use your theme's header editor or a custom code plugin that inserts code into the <head>. If using WP Engine, download the WP Engine plugin that enables adding custom JavaScript to all pages, and apply it across all pages.

Mistake #3: Not Saving Changes or Using the Wrong Environment

After pasting the code, you must save your theme or site changes. If you are working on a staging site, test site, or localhost, SeaText will not activate because development URLs are restricted for security reasons. Fix: Only install the code on your live production domain. If you need to test on a development domain, create a separate SeaText account for that domain. Each account is linked to a single primary URL.

Mistake #4: Failing to Refresh and Wait for Activation

SeaText does not activate instantly. You must visit your website several times and stay on the page for at least 40 seconds. Then wait up to 10 minutes for your website name to appear in the dashboard. Many users expect immediate activation and assume the code is wrong when it is simply a timing issue. Fix: After installation, load your site in a browser, remain on the page for 40+ seconds, and repeat this two or three times. Then check the SeaText dashboard. If after 10 minutes nothing appears, contact support.

Mistake #5: Using the Same Account for Multiple Domains

Each SeaText account is linked to a single primary URL. If you try to use the same code on multiple domains, the AI will not work on the second domain. Fix: Create a separate SeaText account for each domain you want to use. This includes different subdomains or separate production and development domains.

Mistake #6: Ignoring the Activation Step After Installation

Copying the code is only the first step. After installation, you must proceed to the Main AI Hub to activate the necessary AI on your preferred pages. Then configure the AI parameters as needed. Many users think the code alone is enough, but the AI remains inert until you activate it. Fix: Log in to your SeaText account, go to the Main AI Hub, and click “Activate” for the agents you want. Then visit “Configuration” to adjust settings.

Key Facts About SeaText AI Integration

Limitations and When This Advice Does Not Apply

This guide covers mistakes specific to copying and pasting the SeaText integration code. If you are using a CMS like WordPress with a plugin that handles custom code, the same principles apply but the exact steps may differ. The advice does not apply if you are using SeaText's server-side integration or API, as those require different implementation methods. Also, if you are on a platform that does not allow custom JavaScript, you may need a different approach.

Terminology

• Integration code: The JavaScript snippet provided by SeaText that you paste into your website.
• Activation: The process of linking your website to your SeaText account so the AI can start working.
• Primary URL: The main domain associated with a SeaText account. Only one URL per account.
• Bot traffic: Invalid clicks from automated programs that can waste ad spend. SeaText helps detect and refund these.
• AI Agents: Specialized functions like CRO optimizer, Google Ads optimizer, translation, etc., that you activate after integration.

Frequently Asked Questions

Why is my SeaText AI not showing up after I pasted the code?

Most likely you missed one of the activation steps: you must visit your site several times and stay on the page for at least 40 seconds, then wait up to 10 minutes. Also check that the code is in the and that you saved your changes.

Can I use the same code on multiple websites?

No. Each SeaText account is tied to a single primary URL. You need a separate account for each website or domain.

What if I accidentally copied extra characters?

Paste the code into a plain text editor first to see the exact content. Then compare it to the original provided on the integration page. Remove any extra spaces or line breaks before pasting into your site.

How long does it take for SeaText to start working after I install the code?

After you visit your site multiple times, stay for 40+ seconds each time, wait up to 10 minutes for your website name to appear in the dashboard. If it does not appear, contact support.

Does SeaText work on localhost or staging sites?

No. Development URLs like localhost are restricted for security reasons. Use a real domain. For staging, create a separate account with that domain.

What should I do if my website name never appears in the SeaText dashboard?

Contact SeaText support immediately. This could indicate an issue with the installation on your platform.

SeaText AI integration usually takes less than 10 minutes from start to confirmed connection. Copying the JavaScript snippet and adding it to your site can take under a minute. The rest of the time goes into activation: you visit your page, stay for at least 40 seconds, and then wait a few minutes for SeaText to show your site name.

That estimate assumes you have three things before you start: a SeaText AI account, a real domain, and a way to add custom JavaScript to your site. If you have those, you can likely finish in less than 10 minutes. If you don't, the setup will take longer no matter how fast the code is.

Why the setup time matters

SeaText works by rewriting and optimizing page copy based on visitor context. That can only happen after the script is installed and the connection is confirmed. So the setup window is not just a formality; it's the point where the tool becomes able to do anything.

If you ignore the activation steps, you might come back later and think the tool isn't working. The code may be on your site, but the AI stays inert until SeaText links the script to your account. That's why the "visit the page and wait" steps are part of the timeline.

From an implementation perspective, the key is to separate "code is installed" from "SeaText is connected." Many people think the job is done when they paste the script. It isn't. The 40-second visit and the five-minute confirmation are what make the connection real.

What "set up" really means

"Set up" is not one action. It's three:

1. Code installation. Get the JavaScript snippet onto your site.
2. Connection activation. Visit the page for at least 40 seconds so SeaText can link the script to your account.
3. Agent selection. Go to the Main AI Hub and decide which AI agents to turn on.

The first two are usually the 10-minute part. The third is a decision about what you want the tool to do, not a technical wait.

Readiness checklist: what you need before you start

• A SeaText AI account. The installation process requires one. If you don't have an account, create it first.
• A real domain. Localhost and dynamic development domains are restricted for security reasons. Use the domain that will actually serve your site.
• A way to add custom JavaScript. Most CMS platforms have a code injection area or a plugin. If yours doesn't, ask someone with server-side access.
• One primary URL. Each SeaText account is linked to a single primary URL. If you have multiple domains, you need separate accounts.
• About 10 focused minutes. That includes the 40-second visit and the five-minute confirmation wait.

If your site runs on WPEngine, download the WP Engine plugin first so you can add custom JavaScript safely.

Signs you should wait before integrating

• You only have a staging or development domain right now.
• You haven't created a SeaText account.
• Your site is on WPEngine and the plugin for custom JavaScript isn't installed.
• You're not sure which domain should be the main one.
• You plan to switch platforms or change your domain soon.

There's one exception: if you need to test on a separate domain, you can create a separate SeaText account for that domain. The tool links each account to one primary URL, so a test domain gets its own account. Localhost, however, is still restricted.

Where the 10 minutes actually go

The fastest way to estimate your time is to split the work into four parts:

• Copy the code (under a minute). SeaText provides the JavaScript snippet on the General Integration page.
• Paste it into your site (a few minutes). Add it through your CMS's code injection area, a plugin, or a developer's help. On WPEngine, install their plugin first.
• Visit the page after install (at least 40 seconds). This is the step people forget. SeaText needs to see your website. Visit or refresh it several times and stay on the page for at least 40 seconds.
• Confirm the connection (at least 5 minutes). Wait five minutes and check for your website name next to the SEATEXT logo. If it doesn't appear after 10 minutes, contact support.

If you skip the "visit the page" part, the setup seems done but the AI is not linked. That single step turns a 10-minute setup into a half-day mystery.

Key facts about SeaText AI integration

Common mistakes that stretch a 10-minute setup into a longer project

• Pasting the code without an account. The script won't activate without a linked SEATEXT AI account.
• Using localhost or a dynamic development domain. These are restricted and may not work properly.
• Using one account for multiple domains. Each domain needs its own account.
• Skipping the 40-second page visit. The code being present isn't the same as the AI being active.
• Checking the confirmation too soon. Wait at least five minutes.
• Giving up after 10 minutes. Contact support instead of re-installing blindly.

Limitations and exceptions worth knowing

SeaText doesn't work on every setup exactly the same way. The main exceptions to the 10-minute timeline are:

• WPEngine: You must install the WP Engine plugin before you can add custom JavaScript. That's an extra step on top of the usual copy-paste.
• Multiple websites: Create one account per website. You can't run several domains under one account.
• Dynamic development domains: They may not function properly because SeaText can't reliably associate traffic with your account.
• Inert script until activation: The AI does not change your content until the connection is confirmed and you activate the agents you want.

Terms you might see on the integration page

• JavaScript snippet: The code SeaText gives you to paste into your site.
• Domain: The web address SeaText will link to your account. Each account is tied to one primary URL.
• Activation: The point where SeaText recognizes your site after you visit it and stay for at least 40 seconds.
• Main AI Hub: The area where you go to turn on AI for your preferred pages.
• Variants Edit: The panel where you can review or edit the first round of automatic translations and variants.

Frequently asked questions

Does SeaText start changing my site the moment I paste in the code?

No. The AI remains inert until activated. After you paste the code, you need to visit or refresh your website for at least 40 seconds, then wait for the connection to be confirmed.

Can I set up SeaText without a developer?

It depends on your platform. If you can add custom JavaScript through your CMS or a plugin, you can do it yourself. On WPEngine, install their plugin first. If you don't have code access, ask someone who does.

What if my website name doesn't appear after 10 minutes?

Contact SeaText support. A missing name usually means the script isn't installed correctly, and you may need help with your specific platform.

Can I use the same account for a staging site and a live site?

No. Each SeaText account is linked to one primary URL. Localhost and some dynamic development domains are restricted, so use a real domain for each account.

What's the next step after the integration is confirmed?

Go to the Main AI Hub and activate the AI on the pages you want. You can also use Variants Edit to review or edit the first round of automatic translations.

What You Need Before You Start

Installing SeaText AI on a custom-coded site requires a few things in place:

• A SEATEXT AI account – You can create one for free on the pricing page.
• Access to your website’s HTML – You need to be able to edit the source code, typically via an FTP client, a code editor, or your hosting control panel.
• A valid, real domain – Development URLs like localhost or dynamic staging domains are not supported. Use a production or real test domain.
• One account per domain – If you plan to install on multiple sites, you must create separate accounts for each.
• For WPEngine users – Install the WP Engine plugin to add custom JavaScript if you cannot edit the theme files directly.

Step-by-Step Installation Process

Step 1: Create a SEATEXT AI Account

Go to the SEATEXT AI homepage and sign up. You will need a valid email and a primary URL for your website. Each account is tied to a single domain, so choose the exact URL you will use. If you have multiple domains, create a separate account for each.

Step 2: Copy the JavaScript Code

After logging in, navigate to the General Integration section. There you will find a unique JavaScript snippet. Copy it exactly as shown. Do not modify the code. The snippet contains your account ID and settings.

Step 3: Insert the Code into Your Website

Open your website’s HTML file (or template file if you use a CMS). Find the closing </body> tag. Paste the copied JavaScript snippet just before that tag. Save the file. If you have multiple pages, ensure the snippet is included on every page where you want SeaText to work. Many sites use a common footer template – insert it there once.

Step 4: Deploy the Changes

Upload the edited file to your server or publish the changes through your hosting platform. The code is secure and remains inactive until you activate it, so no content will change yet.

Step 5: Visit Your Website Multiple Times

Open your site in a browser. Visit it several times, and stay on the page for at least 40 seconds each time. This step links the AI to your account and confirms the script is loaded. A quick page load will not trigger the connection.

Step 6: Wait for Confirmation

Allow up to 5 minutes. Then check your SEATEXT AI dashboard. You should see your website name displayed next to the SEATEXT logo at the top of the page. If it does not appear after 10 minutes, contact support.

Step 7: Activate the AI Agents

Once your site is connected, go to the Main AI Hub. There you can activate the specific AI agents you need (e.g., CRO Optimizer, Google Ads Agent, Translation Agent). Use the Configuration panel to adjust parameters. You can also edit variants manually later.

How the Installation Works: Mechanics and Why It Matters

The JavaScript snippet is a lightweight script that loads when a visitor opens your page. It does not change your site’s appearance until you activate an agent. The script communicates with SeaText servers to match your account and track visits. This is why you need to visit your site after installation – the script must see a real visitor from your account’s domain to link the two.

Why does this matter? Without the activation step, the AI remains inert. Your site stays exactly as it is. The 40-second dwell time ensures the script has enough time to load and send data. The 5-minute wait allows the server to process the visit and update the dashboard.

This process is designed to be secure. The script is tied to your account. No one else can use it. And it only activates when you choose to turn on agents from the dashboard.

How to Verify the Installation

After completing the steps, confirm that the integration works:

• Check your SEATEXT dashboard for the green connection indicator next to your domain.
• Open your website’s browser console (F12) and look for any errors from the SeaText script.
• Trigger a test visit by typing a keyword that matches an ad campaign – the page should adjust in real time if you have activated the Google Ads Agent.

If you do not see the domain name in the dashboard after 10 minutes, the code may not be placed correctly. Recheck the insertion point and ensure the file is saved. Clear your browser cache and try again. Contact support if it still fails.

Key Facts About SeaText AI Installation

Common Mistakes and How to Avoid Them

• Using the same account for multiple domains – Each SEATEXT account is tied to one primary URL. If you need to install on more than one site, create separate accounts.
• Placing the code in the wrong location – The snippet must go before the closing </body> tag. Placing it in the <head> or elsewhere may break functionality.
• Not waiting long enough – The activation process requires you to visit the site and stay for at least 40 seconds. A quick page load will not trigger the connection.
• Using a development URL – localhost or dynamic staging domains are blocked. Use a real domain or a static test domain.
• Forgetting to refresh after code insertion – After pasting the code, you must refresh the page to load the script. Also, clear any server cache if applicable.
• Not including the snippet on all pages – If you want SeaText to work on every page, the snippet must be present on each page. Use a common template to avoid missing pages.

Limitations and When This Advice Does Not Apply

This installation method works only for websites where you have direct access to the HTML source code. If you use a platform like WPEngine, you may need a plugin to add custom JavaScript (the source pack recommends the WP Engine plugin). For other CMS or website builders, refer to their specific integration guides.

SeaText AI does not support dynamic development domains (e.g., those generated by Heroku, Netlify previews, or localhost). If you are in early development, use a subdomain that is publicly accessible.

Each account can manage only one primary URL. If you have multiple domains, you must create a separate account for each. This is a security and data integrity measure.

Another limitation: the script relies on JavaScript. If your site has a strict Content Security Policy (CSP) that blocks external scripts, you may need to whitelist the SeaText domain. Check with your developer or hosting provider.

Finally, the installation steps assume you have basic HTML editing skills. If you are not comfortable editing code, ask a developer for help or use a plugin-based approach.

Frequently Asked Questions

Do I need technical skills to install SeaText AI?

Basic HTML editing ability is enough. You need to know where the </body> tag is in your site’s template. Most developers or site owners can do this in under a minute.

How long does activation take?

After inserting the code, you must visit your site multiple times and stay for at least 40 seconds. Then wait up to 5 minutes for the dashboard to show the connection. In rare cases, it may take up to 10 minutes.

Can I use SeaText AI on a staging site?

Only if the staging site uses a public, real domain. Dynamic or localhost domains are not allowed. If you need to test, use a subdomain like test.yourdomain.com.

What if I don’t see my domain in the dashboard?

First, double-check that the code is placed correctly just before the closing </body> tag. Then clear your browser cache and try again. If it still doesn’t appear after 10 minutes, contact SEATEXT support.

Can I install SeaText AI on multiple pages?

Yes. The JavaScript snippet should be included on every page where you want SeaText to work. If you have a common template, insert it there once.

Is the installation safe?

Yes. The script is inert until you activate it from your dashboard. It does not change your content automatically. The installation process is secure and does not affect your site’s performance.

What happens after installation?

Once the connection is confirmed, you can go to the Main AI Hub to activate the agents you need. Each agent has its own configuration – for example, the Google Ads Agent rewrites landing pages based on keywords, and the CRO Optimizer runs A/B tests on headlines and CTAs. You can also edit the generated variants manually.

Can I use the same account for a development and production domain?

No. Each account is linked to one primary URL. Create a separate account for each domain. This is a security measure.

What if my site uses a CMS like WordPress?

This guide is for custom-coded sites. If you use WordPress, use a plugin like Insert Headers and Footers or the built-in theme editor. For other CMS, refer to their specific integration guides.

If the SeaText integration code won’t copy from the integration page, the cause is usually your browser, not the code. Browser clipboard permissions, ad blockers, or an outdated browser are the most common reasons. Clear the browser cache, allow clipboard access for the SeaText site, or try a different browser; most people fix this in under two minutes.

The code may also copy fine while the real problem is that your website never connects to your SeaText account. That is a different failure, and it usually means the activation step was skipped or a domain rule was missed. This guide walks through both situations in the order you should check them.

Start with a 60-second diagnostic

Before changing settings, find out exactly where the failure happens. That makes the fix obvious.

• Nothing happens when you click the copy button. This points to clipboard permission or a blocked script.
• The button shows a copied message, but pasting gives you nothing. This can be an extension that clears the clipboard, or a browser permission conflict.
• You can select and copy the code by hand, but the button is dead. The page loaded, but the copy script did not run. Likely an ad blocker, privacy extension, or old browser.
• The code copies, but your website never shows as connected. This is not a copying problem. Skip to the activation checklist below.

Run through this order:

1. Click the copy button once.
2. Open browser settings for the site and check Clipboard permission.
3. Right-click the selected code and choose Copy. If manual copy works, the code is fine.
4. Open the developer console (F12) and look for red error messages.
5. Open the page in a private window with all extensions disabled.
6. If it works there, clear the browser cache or switch browsers.

Browser clipboard permissions are the most common cause

Browsers treat the clipboard as sensitive. SeaText’s copy button uses JavaScript to write to your clipboard, and the browser may ask for permission first. If you once clicked Block, the button will silently do nothing.

How to fix clipboard permission

• Chrome or Edge: Click the lock or info icon in the address bar, choose Site settings, find Clipboard, and set it to Allow. Then reload the SeaText page.
• Safari: Open Safari’s Settings, go to Websites, select Clipboard, and allow seatext.com. Or simply select the code and use the Edit menu’s Copy command.
• Firefox: Go to about:preferences, open Privacy & Security, and check the clipboard settings. In most cases, manual copy with Ctrl+C works even if the button is blocked.

After allowing clipboard access, reload the page and click the copy button again.

Ad blockers and privacy extensions can disable the copy script

The copy button is a small JavaScript function. Tools like uBlock Origin, NoScript, or privacy suites can stop that function from running. The page still looks normal, but the button does nothing.

Test the integration page in a private or incognito window with extensions disabled. If the button works there, add an exception for seatext.com in your extension, or use manual copy while you finish the installation.

An outdated browser or stale cache can break the button

The clipboard API (navigator.clipboard) is modern. Very old browsers may not support it, so the copy button fails. Update your browser to the latest version.

A stale cached version of the page can also break the button. Clear the cache for seatext.com, then reload. If the problem follows you across browsers, test on another device.

The code copies, but your website never connects: activation checklist

Copying the code is only step one. SeaText’s integration guide lists a few requirements that people often skip.

Before you paste

• Create a SeaText AI account first. The guide says you need an account before you can install the script.
• Paste the JavaScript in the place your platform uses for custom scripts. On WPEngine, the guide says to download the WP Engine plugin that lets you add custom JavaScript and apply it across all your pages.

After you paste

1. Visit or refresh your website several times and stay on the page for at least 40 seconds. SeaText uses this to activate the AI and link it to your account.
2. Wait at least five minutes.
3. Open the SeaText dashboard and look for your website name next to the SEATEXT logo at the top of the page.
4. If you do not see it after 10 minutes, contact SeaText support. The guide says this may indicate an installation issue on your platform.
5. When the site is linked, go to the Main AI Hub to activate the AI on the pages you want. Use Configuration to adjust the AI parameters.

Optional editing: SeaText provides an initial round of automatic translations and variants for testing. In your account, open Variants Edit in the left panel, select the URL and language, and review or edit the variants.

Domain rules that look like copying failures

Even a perfectly copied code will not show as connected if the domain rules are wrong.

• Each SeaText account is linked to a single primary URL. You cannot use one account for two domains and expect both to connect.
• Need SeaText on multiple websites? Create one account for each website.
• Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.
• Dynamic development domains may not function properly because SeaText might be unable to reliably associate traffic with your account.

If you copied the code onto a local test site, that alone can explain why nothing connects. Move the code to a real domain and repeat the activation steps.

Key facts at a glance

This guide covers the standard SeaText setup path: create an account, copy the JavaScript code, paste it on your site, and activate the AI. If your site has custom requirements beyond a normal script install, your platform may need extra steps.

Common mistakes that make the code seem broken

These mistakes trick people into thinking the copy function is at fault when the real issue is the setup.

• Treating a copied code as a finished install. Copying is the first step. You still have to paste, activate, and link the site.
• Testing on localhost. The guide restricts development URLs. Your code will not link from a local test domain.
• Using one account for staging and production. Each account is linked to one primary URL, so create a separate account for each domain.
• Skipping the 40-second activation visit. The site must be visited or refreshed several times and viewed for at least 40 seconds so SeaText can link it.
• Checking too early. The website name appears after at least five minutes, so a quick check at minute two can make a good install look broken.
• Pasting into the wrong place on WPEngine. Use the WP Engine custom JavaScript plugin applied across all pages, not just a single post.
• Copying before creating an account. Without a SeaText account you cannot complete the installation.

Limitations: when this advice does not apply

These fixes cover the normal failure modes of the SeaText integration page. A few situations are different.

• Copy fails everywhere. If the button fails in every browser, every device, and in private mode with extensions off, the issue may be on SeaText’s page itself. Try again later or contact support.
• Your editor blocks paste. If the code copies but will not paste into your code editor, the problem is the editor or its clipboard permissions, not the SeaText page.
• Aggressive caching or bot protection. Some security plugins can block the script that links your site. If activation never completes, check your security and caching plugins.
• Dynamic development domains. A domain that changes frequently may never associate traffic correctly, so the installation may not work even with correct code.

Terminology you will meet during setup

• Integration code: The JavaScript snippet SeaText gives you to place on your website.
• Clipboard: The temporary storage area your operating system uses for copy and paste.
• Primary URL: The single main domain linked to your SeaText account.
• localhost: The local development hostname on your own computer. SeaText restricts it for security.
• Main AI Hub: The SeaText dashboard area where you activate AI on chosen pages.
• Variants Edit: The SeaText panel where automatic translations and variants appear for review or manual editing.

Frequently asked questions

Why did the copy button work yesterday but not today?

A browser update or a newly installed extension can change clipboard permissions. Check the site’s clipboard setting and test in a private window with extensions disabled.

Can I copy the SeaText code by hand?

Yes. Select the code and press Ctrl+C (Cmd+C on Mac). Manual copy works when the JavaScript button is blocked. The same post-copy steps still apply: paste it in the right place, visit the site for 40 seconds, and wait at least five minutes.

I copied the code, so why does my website not show up?

Most likely you skipped the 40-second activation visit, checked before five minutes, used localhost, or used one account for two domains. Run through the activation checklist above.

Do I need a separate code for each website?

Each SeaText account is linked to a single primary URL. For multiple websites, create one account for each website and install the code for each domain.

Will pasting the code change my content immediately?

No. The installation process is secure, and the AI remains inert until activated. Your content stays unchanged until you activate the AI in the Main AI Hub.

What if my website still does not connect after 10 minutes?

The SeaText guide says to contact support immediately. A missing connection after 10 minutes may indicate an installation issue on your platform.

Where can I see SeaText pricing?

The General Integration page links to pricing. Open SeaText’s pricing page for current plans and limits.

If you need AI‑driven conversion optimization on Tilda, SeaText's paid‑plan integration is the next step.

What SeaText Features Require Custom Code

Every SeaText agent runs in the browser after the SeaText JavaScript snippet loads. The snippet must be placed in the <head> of each page or injected via a block that accepts raw HTML. Without that injection point, none of the following agents can operate:

• Conversion Agent – rewrites headlines, offers, and CTAs in real time.
• Google Ads Agent – matches landing‑page copy to the exact keyword that triggered the ad.
• Translation Agent – serves up to 125 languages automatically.
• Bot Refund Agent – detects invalid clicks and builds refund‑ready reports.
• AI SEO Agent – publishes long‑tail Q&A pages for organic traffic.
• ChatGPT Influence Agent – shapes brand representation in AI assistants.
• Ecommerce Agent – optimizes product names, descriptions, and CTAs.
• Additional agents such as Visitor Source Rewrite, Personalization, A/B Testing, Scroll Slowdown, and Authority Link Builder.

All of these rely on the same single snippet; there is no “lite” version that works without script injection.

Step‑by‑Step Tilda Integration on Paid Plans

1. Log in to your SeaText account and copy the JavaScript snippet shown under SEATEXTCODEINTEGRATION.
2. In Tilda, open Site Settings → More → HTML code for the head section → Edit code.
3. Paste the snippet into the “Edit code inside HEAD tag” field, then click Save and Publish.
4. Alternatively, for a single page: add a new block, choose T123 (Other → T123), open its Content editor, paste the snippet, save, and publish the page.
5. Visit the live site, stay on the page for at least 40 seconds, and refresh a few times. The SeaText logo should appear in the corner, confirming activation.

These steps are documented in the SeaText Tilda integration guide (source S1).

Tilda Free vs. Paid Plan Limitations in Detail

The SeaText source pack only describes how to add code on paid Tilda tiers. Public Tilda documentation indicates that the free plan restricts the editor to a predefined block library and does not expose a head‑code field. Because this restriction is not explicitly confirmed in the SeaText sources, treat it as unverified but widely reported by users.

Paid tiers (Personal, Business) unlock:

• Site‑wide head‑code field.
• T123 block for per‑page HTML injection.
• Custom domain connection (required for SeaText security checks).
• Removal of Tilda branding and higher bandwidth limits.

Cost Comparison and Upgrade Path

SeaText pricing is separate from Tilda. SeaText offers a free trial and paid plans that scale with the number of agents and traffic volume. Tilda pricing varies by region and plan; consult the official Tilda pricing comparison for current rates.

Typical upgrade path:

1. Start a SeaText account (free trial available).
2. Choose a Tilda paid tier that includes head‑code access.
3. Follow the integration steps above.
4. Activate the agents you need from the SeaText dashboard.

Common Troubleshooting After Upgrading

• Snippet not loading: Verify the code is in the site‑wide head field, not just a page block. Clear browser cache and re‑publish.
• SeaText logo never appears: Ensure the domain is a valid, publicly reachable URL (no localhost or temporary subdomains). Wait at least five minutes after publishing.
• Agents not activating: In the SeaText dashboard, confirm each desired agent is toggled On. Some agents require a minimum traffic threshold before they start optimizing.
• Multiple domains: Each domain needs its own SeaText account (source S1). Create a separate account for staging and production if you use both.

Alternatives If You Stay on Tilda Free

If upgrading Tilda is not an option, consider platforms that allow free custom script injection:

• WordPress.com Business – permits head‑code via plugins.
• Webflow (free tier with custom code) – allows script insertion in project settings.
• GitHub Pages / Netlify – static‑site hosts where you control the full HTML.

These alternatives let you paste the SeaText snippet without a paid Tilda subscription, but they may require more technical setup.

Decision Framework: When to Upgrade or Switch

1. Identify goals – do you need AI‑driven CRO, multilingual translation, or bot‑refund protection?
2. Check platform capabilities – can you add a <script> tag in the head?
3. Compare total cost – SeaText subscription + Tilda paid tier vs. alternative host + SeaText.
4. Upgrade or migrate – choose the cheapest viable path that unlocks script injection.
5. Test after upgrade – paste snippet, publish, wait 40 seconds, verify SeaText logo.

Practical Scenarios

• E‑commerce store on Tilda Free. You can build product pages, but without SeaText’s Conversion Agent you miss real‑time headline tweaks that lift sales.
• Landing page for a Google Ads campaign. On a paid tier, the Google Ads Agent rewrites the headline to match each keyword, increasing relevance and conversion.
• International blog. Translation Agent serves 125 languages automatically; free Tilda blocks this, so you would need to upgrade or move the blog.

Limitations and Edge Cases

Even on paid Tilda plans, SeaText requires a valid, publicly reachable domain. Development URLs such as localhost or temporary subdomains are restricted for security. Each SeaText account is tied to a single primary URL; you cannot share one account across multiple domains without creating separate accounts (source S1).

FAQ

Can I add SeaText code to a single page on Tilda Free?

No. The free plan does not allow any custom HTML blocks, even on individual pages (unverified – based on public Tilda docs).

Do I need a SeaText account before I can test the integration?

Yes. You must create a SeaText AI account, copy the snippet, and then insert it into your site.

Will upgrading to Tilda Personal automatically enable SeaText?

Upgrading gives you the technical ability to add the script; you still need to paste the SeaText snippet and activate the agents you want.

Is there a free alternative to SeaText that works on Tilda Free?

SeaText’s core functionality relies on custom JavaScript, which free Tilda blocks. You would need a different tool that works without code injection.

How long does it take for SeaText to become active after publishing?

Visit the page several times and stay for at least 40 seconds; the AI becomes inert until this activation period passes.

You activate SeaText AI on specific page types by installing the JavaScript snippet site-wide, then using the Main AI Hub in your SeaText dashboard to enable agents only on the URLs or page categories you select. The AI stays inert until you turn it on for each page type, giving you full control over where each of the 20 specialized agents runs.

Prerequisites before you start

Before configuring page-type activation, complete these one-time setup steps:

• Create a SeaText AI account — each account links to a single primary domain. If you manage multiple domains (for example, a staging and a production site), you need a separate account for each.
• Install the JavaScript snippet on every page — copy the code from your SeaText dashboard and paste it into the <head> of your site template so it loads everywhere. On WP Engine, use the dedicated plugin to add custom JavaScript.
• Verify the connection — visit your site several times and stay on a page for at least 40 seconds. Wait up to five minutes for your website name to appear next to the SeaText logo in the dashboard. If it does not appear after 10 minutes, contact support.

Step-by-step: activate agents for a page type

1. Open the Main AI Hub in your SeaText dashboard.
2. Choose the agent you want to run — for example, the Google Ads Landing Page Agent, the Ecommerce Product Copy Agent, or the Website Translation Agent.
3. Click "Configuration" for that agent to adjust its parameters.
4. Select the target pages — you can specify individual URLs, URL patterns, or page categories (such as blog posts, product pages, or landing pages) where the agent should be active.
5. Save and publish the configuration. The agent will begin working only on the pages you designated.

Understanding page types and agent matching

SeaText provides over 20 autonomous agents, each designed for a specific job. Matching the right agent to the right page type is where the value lives:

• Google Ads Landing Page Agent — rewrites headlines, offers, and CTAs in real time to match the keyword that triggered the ad. Best on paid landing pages.
• Ecommerce Product Copy Agent — optimizes product names, descriptions, and CTAs. Deploy on product detail and category pages.
• Website Translation Agent — translates every page element into up to 125 languages. Enable site-wide or only on international-facing sections.
• Visitor Source Rewrite Agent — adapts copy to match the visitor's origin (Google, Meta, email, referral). Useful on high-traffic entry pages.
• AI A/B Testing Agent — generates variants and scales winners. Works on any page where you want continuous copy optimization.
• Bot Protection Agent — detects invalid paid clicks and builds refund-ready reports. Activate on pages receiving paid traffic.

You can run multiple agents on the same page type. For instance, a product page might run the Ecommerce Product Copy Agent, the Translation Agent, and the A/B Testing Agent simultaneously.

Configuration options per agent

Each agent exposes its own configuration panel in the Main AI Hub. Common settings include:

• Target URL patterns — use wildcards (e.g., /blog/*, /product/*) to capture entire page types.
• Language scope — for the Translation Agent, choose which of the 125 languages to enable.
• Aggressiveness level — for rewriting agents, control how much the AI may change headlines, body copy, or CTAs.
• Exclusion rules — prevent the agent from running on specific URLs even if they match the broader pattern.

Changes take effect immediately after you save. No code redeployment is required.

Verification: confirm the agent is live on your page type

1. Open a page that matches your target pattern in an incognito browser window.
2. Check the browser console for the SeaText initialization log — it should show the active agent IDs.
3. If the agent rewrites copy (e.g., Google Ads Agent), click a test ad and verify the headline or CTA changes to match the keyword.
4. In the dashboard, navigate to "Variants Edit" to see the generated variants for that page and language.

If nothing appears after five minutes, re-check your URL pattern and ensure the JavaScript snippet loads on that page.

Common mistake: activating before the snippet is verified

Users often configure agents in the Main AI Hub before the site connection is confirmed. The dashboard will accept the configuration, but the agents will not run because the snippet has not yet linked to your account. Always wait for the website name to appear next to the SeaText logo before setting up page-type activation.

Limitations and when this approach does not apply

• Development domains — localhost and dynamic staging URLs are restricted for security. Use a real domain (e.g., staging.yourdomain.com) with its own SeaText account.
• Single-page applications with client-side routing — the snippet must re-initialize on each route change. If your framework does not trigger a full page load, you may need to call the SeaText initialization function manually after route transitions.
• Pages behind authentication — agents cannot rewrite content they cannot crawl. Public-facing page types work best.
• One account per primary URL — you cannot manage multiple distinct domains from a single dashboard. Each domain needs its own account and snippet.

Key facts

FAQ

Can I activate different agents on blog posts versus product pages?

Yes. In the Main AI Hub, set the target URL pattern for each agent — for example, /blog/* for the AI SEO Content Factory agent and /product/* for the Ecommerce Product Copy Agent.

Do I need to reinstall the snippet when I add a new page type?

No. The snippet is installed once site-wide. You only update the agent configuration in the Main AI Hub to include the new URL pattern.

How quickly do configuration changes take effect?

Immediately after you save in the Main AI Hub. No code deployment or cache clearing is required.

Can I test an agent on a single URL before rolling it out to a whole page type?

Yes. Enter the exact URL in the agent's configuration instead of a wildcard pattern. Once verified, expand to the broader pattern.

What happens if two agents try to rewrite the same element?

Agents operate on different layers (headlines, CTAs, translations, etc.). Conflicts are rare, but you can adjust aggressiveness settings or exclusion rules to prevent overlap.

Is there a limit to how many page types I can configure?

No practical limit. You can create as many URL patterns and agent combinations as your site structure requires.

Can I use SeaText on a staging environment?

Yes, but you must use a real domain (e.g., staging.yourdomain.com) with its own SeaText account. Localhost and dynamic preview URLs are blocked.

Yes, you can activate SeaText AI on a single page. Install the JavaScript snippet across your entire site, then use the Main AI Hub in your SeaText dashboard to enable agents only on the specific URL you want. The AI stays inert on every other page until you explicitly turn it on.

How Single-Page Activation Works

SeaText AI uses a two-step model: a lightweight JavaScript snippet that loads on every page, and a dashboard control layer that decides which agents run where. The snippet itself does not rewrite content, translate text, or inject chat widgets until the Main AI Hub tells it to. This architecture means you can drop the snippet once — via your CMS, tag manager, or theme file — and then toggle activation per URL from the dashboard without touching code again.

When you open the Main AI Hub, you see a list of detected URLs. Next to each URL you choose which of the 20 specialized agents (CRO Optimizer, Google Ads Agent, Translation Agent, Bot Protection Agent, etc.) should be active. If you select only /landing-page-a and leave the rest unchecked, only that page gets AI-driven rewrites, translations, or bot detection. All other pages load the snippet but perform no AI actions.

Step-by-Step Setup Process

1. Create a SeaText AI account. Each account binds to one primary domain. If you need a staging domain, create a separate account for it.
2. Copy the JavaScript snippet from the integration page in your dashboard.
3. Paste the snippet site-wide. Use your CMS header/footer, Google Tag Manager, or a plugin like the WP Engine custom-JS plugin. The snippet must load on every page you might ever want to activate.
4. Visit your site and stay on the target page for at least 40 seconds. This registers the domain and page with your account.
5. Wait up to five minutes for the site name to appear next to the SeaText logo in the dashboard. If it does not appear after 10 minutes, contact support.
6. Open the Main AI Hub. Find the exact URL you want to activate. Enable the agents you need for that page only.
7. Click "Configuration" on each enabled agent to set parameters — language, rewrite intensity, bot-sensitivity thresholds, etc.
8. Optional: Use Variants Edit to review or manually adjust the automatic translations and copy variants generated for that specific URL and language.

Prerequisites Before You Start

• A valid, publicly resolvable domain. Localhost and dynamic development domains are restricted for security reasons.
• Ability to inject JavaScript in the <head> or before </body> across the entire site.
• At least one SeaText AI account per primary domain.
• Admin access to the SeaText dashboard to reach the Main AI Hub and Configuration panels.

Key Facts

Limitations and Constraints

The single-page model has hard limits you should plan for:

• Snippet must load everywhere. You cannot skip the snippet on pages where you don't want AI. The snippet is harmless but it does add a tiny network request.
• One account per domain. If you run example.com and shop.example.com as separate sites, you need two accounts and two snippets.
• No localhost testing. You cannot activate or test on localhost or ephemeral preview URLs. Use a real staging domain.
• Agent granularity is per URL, not per element. You turn an agent on or off for the whole page. You cannot tell the Translation Agent to translate only the footer while leaving the header alone.
• Configuration changes are not instant. After toggling an agent in the Main AI Hub, allow a few minutes for the change to propagate to the edge network.

Practical Scenarios

Scenario A: Paid-Landing-Page Test

You run a Google Ads campaign sending traffic to /promo-spring. You want the Google Ads Agent to rewrite headlines and CTAs to match each keyword, but you don't want the CRO Optimizer touching your blog. Install the snippet site-wide, activate only the Google Ads Agent on /promo-spring, leave all other pages unchecked.

Scenario B: Single-Language Translation Pilot

Your Spanish team wants to test the Translation Agent on /es/productos before rolling out to 125 languages. Activate the Translation Agent only on that URL, set the target language to Spanish in Configuration, and use Variants Edit to approve the first batch of translations.

Scenario C: Bot-Refund Evidence on High-Spend Pages

You spend heavily on Meta ads driving to /enterprise-demo. Activate the Bot Protection Agent only there to collect evidence for refund claims. Keep the agent off low-traffic pages to avoid noise in the reports.

Common Mistakes to Avoid

Verification Steps

1. After enabling agents in Main AI Hub, open the target page in an incognito window.
2. Check browser dev tools Network tab for SeaText requests — they should appear only on the activated page.
3. If using the Translation Agent, switch the page language and confirm translated copy renders.
4. If using the Google Ads Agent, append a test keyword parameter (e.g., ?kw=test+keyword) and verify headline rewrites.
5. In the dashboard, confirm the page shows "Active" status next to the enabled agents.

Terminology Quick Reference

• Main AI Hub — Dashboard screen where you enable/disable agents per URL.
• Agent — One of 20 specialized AI modules (CRO Optimizer, Translation Agent, Bot Protection Agent, etc.).
• Configuration — Per-agent settings panel for parameters like language, intensity, thresholds.
• Variants Edit — Interface to review, create, or manually edit automatic translations and copy variants for a specific URL and language.
• Inert snippet — The JavaScript loads but performs zero AI actions until the Main AI Hub activates an agent for that URL.

FAQ

Can I activate different agents on different pages?

Yes. The Main AI Hub lets you pick any combination of agents for each detected URL independently.

Do I need to reinstall the snippet to add a new page later?

No. The snippet is already site-wide. Just visit the new page, wait for it to appear in the Main AI Hub, then enable agents.

What happens if I activate an agent on a page that already has manual A/B tests running?

SeaText's AI A/B Testing Agent will run its own experiments. Coordinate with your existing testing tool to avoid conflicting changes on the same elements.

Is there a limit to how many pages I can activate?

No published limit. Each activation adds a small configuration entry; the snippet load is unchanged.

Can I schedule activation for a future date?

The source pack does not mention scheduling. You enable agents manually when ready. Check the dashboard for any beta scheduling features.

Will the snippet slow down pages where AI is off?

The snippet is designed to be lightweight and inert. It adds one small request but no rendering work on inactive pages.

How do I deactivate a single page without removing the snippet?

In the Main AI Hub, uncheck all agents for that URL. The snippet stays, but no AI runs.

If SeaText AI is not active immediately after installation, that is partly by design. The script is installed in a secure, inactive state, and it only begins working after your page is visited long enough to link the site to your account and after you switch on the agents you need. The most common causes of delay are browser caching, script placement that misses some pages, an account/domain connection that has not finished, or agents that were never activated in the Main AI Hub.

Use the diagnostic sequence below. You should usually resolve this in a few checks, not by reinstalling everything from scratch.

What “not active” means with SeaText

SeaText AI does not rewrite your website the moment the JavaScript snippet is pasted. The official integration instructions describe the installation as secure and say the AI remains inert until activated. “Inert” is the key word: it means the code is present but not doing anything yet.

There are two separate stages. First, the script is installed on your site. Second, the account is connected and an agent is turned on for a specific page. If you skip the second stage, the script can be live and you will still see no effect. This division matters because it changes what you should check when something looks inactive.

Ignoring the activation step often leads to a false conclusion: you assume the tool is broken, when the site is actually waiting for the 40-second visit and the five-minute connection signal.

Run the diagnostic sequence in this order

Do not jump to reinstallation. Follow this order, because each step depends on the one before it.

1. Confirm your SeaText account exists. You need an account before you can install or activate the script. If you do not have one, create one first.
2. Confirm the JavaScript snippet is installed on the live page. Open the page in a private window, view the page source, and search for the SeaText snippet. On WordPress with WP Engine, install and apply the WP Engine custom JavaScript plugin across all pages.
3. Bypass cache. If the script is there but you still see old content, clear your browser cache, try incognito mode, or open the site on another device.
4. Trigger the activation visit. Visit or refresh your website several times and stay on the page for at least 40 seconds. This step activates the AI and links it to your account.
5. Wait five minutes. Look for your website name next to the SeaText logo at the top of the SeaText page. If it appears, the site is connected.
6. Activate agents in the Main AI Hub. Go to the Main AI Hub and activate the necessary AI on the pages you want. Open Configuration to adjust parameters.
7. Escalate only after 10 minutes. If the website name still has not appeared after 10 minutes, contact SeaText support. This usually points to a platform-level problem.

The order prevents you from testing agent behavior before the account and domain are connected.

Likely causes and their fixes

Use this section when the diagnostic sequence points to one specific cause.

1. The agent was never activated

This is the most common cause. The script is installed, but no agent is running. Fix: open the Main AI Hub and activate the agent for your preferred pages. Without that, SeaText has nothing to do.

2. The connection between your site and account has not completed

After adding the script, the AI needs a visit of at least 40 seconds to link with your account. Then you wait at least five minutes for the website name to appear. If you only pasted the code and never visited the page, the connection can remain unfinished. Fix: complete the 40-second visit, then refresh the SeaText dashboard.

3. Browser cache or a caching plugin is showing an old page

Even when the script is live, a cached page can hide it. This is especially true if your site uses page caching or if you are re-checking the same tab. Fix: hard refresh, use incognito mode, clear cache, or check from a different browser. Caching can delay how quickly you see the change without blocking the script itself.

4. Script placement is wrong or not site-wide

If the script is only on the page you tested, other pages will look inactive. On WP Engine, use the official plugin to add custom JavaScript across all pages. On a regular site, verify the snippet is present on the live page, not only in your editor.

5. Domain mismatch

Each SeaText account is linked to a single primary URL. If you are testing on a second domain with the same account, SeaText may not associate that traffic with your account. Fix: use the correct domain or create a separate account for each primary URL.

6. Development URLs

Localhost is restricted for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account. Fix: use a valid, real domain for installation and testing.

7. Account not created yet

You cannot install or activate successfully without an account. The integration instructions state clearly that you need a SeaText AI account before installing the script. Fix: create the account first, then install.

Activation checklist

If you prefer a table, here are the three symptoms users see most often and what to check first.

This table is a shortcut, not a replacement for the diagnostic order. If these checks do not fix it, go back to the full sequence.

Key facts about SeaText installation and activation

The following facts come from SeaText’s General Integration documentation.

Use this table when you are deciding whether the problem is installation, connection, or activation.

Limitations, exceptions, and when this advice does not apply

Some setup situations look like an activation delay but are actually restrictions. The integration guide specifically calls out a few.

Localhost and other development URLs. Development URLs such as localhost are restricted for security. If you test on localhost, SeaText may not activate. Use a valid, real domain.

Dynamic development domains. Dynamic domains, such as temporary preview URLs, may not function properly. The reason is that SeaText cannot reliably associate traffic with your account when the URL changes. This is different from a caching issue and will not be fixed by waiting.

Multiple domains. Each SeaText account is linked to a single primary URL. If you need SeaText on a development domain and a production domain, create separate accounts for each. Trying to use one account on both can make one site look inactive.

WP Engine. If your site is on WP Engine, add custom JavaScript through the WP Engine plugin and apply it across all pages. Installing the snippet in a place WP Engine does not recognize can lead to a partial installation.

This advice does not apply if the script is already connected and agents are active but the site still does not change. In that case, the question is no longer about activation; it is about agent configuration or page targeting.

Terminology: inert, activation, connection, variants

These terms keep appearing in the SeaText interface and in this guide.

• Inert: installed but not yet doing anything. SeaText says the AI remains inert until activated.
• Activation: the process that links the script to your account and switches on an agent. It requires the 40-second page visit and the Main AI Hub step.
• Connection status: shown by your website name appearing next to the SeaText logo at the top of the dashboard.
• Variants: the initial round of automatic translations and text variations SeaText provides for testing. You can review or edit them in Variants Edit.

Knowing these four terms helps you describe the problem precisely when you contact support.

Frequently asked questions

I installed the code, so why is the dashboard still empty?

The code insertion is only the first step. You need to visit or refresh the website several times and stay on the page for at least 40 seconds. Then wait at least five minutes for your website name to appear next to the SeaText logo.

Do I have to activate anything after adding the script?

Yes. Go to the Main AI Hub and activate the AI agents you need on your preferred pages. Without this step, the script remains inert.

Can I use one account on my staging and production sites?

No. Each SeaText AI account is linked to a single primary URL. If you need SeaText on more than one domain, create a separate account for each.

Why does my localhost site not activate?

Development URLs such as localhost are restricted for security reasons. Dynamic development domains may also fail because SeaText cannot reliably associate traffic with your account. Use a valid, real domain.

How long should I wait before contacting support?

Wait at least five minutes after the 40-second activation visit. If your website name still does not appear next to the SeaText logo after 10 minutes, contact support immediately, because that may indicate an installation problem on your platform.

What are variants?

Variants are the initial round of automatic translations and alternate text versions that SeaText creates for testing. You can review, create, or edit them in Variants Edit in your account.

Will clearing my browser cache make SeaText active?

Clearing cache will not activate the script by itself. It removes the possibility that you are looking at an old version of the page. The activation steps, including the 40-second visit and Main AI Hub activation, still need to happen.

After you paste the SeaText JavaScript into Tilda and publish the page, run a verification test immediately. Run it again after every Tilda template or block change. This confirms the script is live and linked to your SeaText account.

The table shows the four-step routine. Use it every time you install, update, or republish. Keep the order the same: publish, stay, wait, re-verify.

When to Run the Verification Test

Run the first test right after you publish. Do not wait until the next day. The test takes only a few minutes.

Run another test after any Tilda change. This includes template edits, block changes, and republishing. If you move a block or change the domain, test again.

Why? Tilda can overwrite code during theme or block updates. A page can look fine while the script is missing. The verification test catches that.

You should also test if the SeaText logo disappears from your dashboard. A missing logo often means the connection is broken.

If you are unsure whether a test is needed, run it. A successful test gives you confidence. It also gives you a clean baseline before you activate agents.

How the Activation Heartbeat Process Works

SeaText keeps the AI inert until someone loads the page. The script does not rewrite anything on its own. It waits for an activation signal.

When you visit or refresh the page, the script sends a heartbeat to SeaText's servers. The heartbeat is a small connection message. It tells SeaText which page and domain made the request.

The server records the visit. Then it links the visit to your account. Your dashboard shows the SeaText logo with your site name when the link is complete.

This process is why the first visit matters. Without a successful heartbeat, the AI cannot start. Agents stay inactive. Your ad spend and traffic do not benefit.

The heartbeat is not a pageview counter. It is a connection check between the page and your SeaText dashboard. Each refresh sends a fresh signal. That is why the instructions say several times.

The server also checks the domain against your account. If they do not match, the link fails. The logo never appears.

Why 40 Seconds and the Five-Minute Wait Matter

SeaText asks you to stay on the page for at least 40 seconds. This is not an arbitrary delay. The page needs time to load fully. The script needs time to send its heartbeat. A short visit can end before the signal is complete.

You should visit or refresh the page several times. One visit is often enough, but several visits make the connection more reliable. Each visit sends another heartbeat.

After that, wait at least five minutes. The server needs time to process the request. It also has to match the page to the correct account. Network latency and caching can add delay.

Do not skip the wait. If you check too early, the logo may not be there yet. That is not a failure. Refresh the page and wait again.

The 40-second window also lets the rest of the page settle. SeaText needs a stable page state. The five-minute window is a safety buffer. It covers slow networks, CDN caching, and busy servers.

Tilda HEAD-Field vs T123 Block Placement

Tilda gives you two main ways to add the SeaText code. The first is the HEAD field. This is in Site Settings. Tilda labels it "Edit code inside HEAD tag". Paste the code there, save, and publish. The script goes into the head of every page on the site.

The second way is a T123 block. Add a T123 block to a specific page. Open Content, paste the code, save, and publish. The script only runs on that one page.

This changes your verification scope. With the HEAD field, one successful test proves the script is on all pages. With a T123 block, a successful test only proves that one page is working.

If you want site-wide verification, use the HEAD field. This is the recommended method. It also makes future template changes easier to verify.

If you are piloting SeaText on a single landing page, a T123 block can work. Just remember that other pages are not covered. You would need to add the block to each page separately.

Save is not publish. A saved draft does not send the script to visitors. Click Publish before you run the verification test.

Multiple Domains Require Separate SeaText Accounts

Each SeaText account is linked to one primary URL. You cannot use one account for two domains. If you need SeaText on a development domain and a production domain, create separate accounts.

The same rule applies to multiple websites. Create one account per website. Do not reuse the same script across different domains.

Development URLs such as localhost are restricted. SeaText blocks them for security reasons. The script cannot reliably associate that traffic with your account.

Use a real staging or production domain for verification. Dynamic development domains may also fail. Even if the page loads, the verification may never complete.

Imagine a staging site at staging.example.com and a live site at example.com. They are different primary URLs. Each needs its own account.

If you copy the same script to both, the dashboard may only link to one. The other will fail verification. Before creating an account, choose the exact primary domain.

Troubleshooting Flow: When the Logo Never Appears

Follow this flow when the logo does not appear after five minutes.

1. Refresh the page and wait another five minutes.
2. Confirm the code is in the correct HEAD field or T123 block.
3. Open the page on a real domain, not localhost.
4. Check that the page is published and reachable.
5. Disable ad blockers or browser extensions, then try again.
6. Test in a different browser or an incognito window.
7. Confirm the SeaText account matches the domain.
8. If using a T123 block, open the exact page that contains the block.

Start with the quickest fix: wait, refresh, check domain. Most failures are one of those three.

Ad blockers can stop external scripts. Add an exception for SeaText during the test. Then refresh the page again.

A T123 block only fires on the page where you placed it. Check the URL in the browser. If you are on another page, the script will not run.

If the code is in the HEAD field, check the site settings. It is easy to paste into the wrong field. Compare your code with the one in your SeaText account.

If you still see no logo, contact SeaText support. Include your domain and the placement you used.

Readiness Checklist

Use this checklist before you move to the next step.

• SeaText account is created for the correct domain.
• Code is placed in the HEAD field or a T123 block.
• Page is published on a real domain.
• Page has been visited or refreshed for at least 40 seconds.
• You waited at least five minutes.
• SeaText logo shows your site name.
• No template or block changes since the last successful test.

Keep this checklist near your setup notes. Use it after every change. It turns a confusing wait into a simple routine.

FAQ

Do I need to run the test on every page?

It depends on where you placed the code. A HEAD-field installation covers all pages, so one successful test proves the script works site-wide. A T123 block covers only the page it is on. For site-wide verification, use the HEAD-field method.

What if the logo never appears?

Go through the troubleshooting flow. Check the placement, the domain, the publish status, and any browser extensions.

Can I use localhost for the verification test?

No. Development URLs such as localhost are restricted. Use a real staging or production domain.

Do I need a separate account for each domain?

Yes. Each SeaText account is linked to one primary URL. Separate domains need separate accounts.

Does the script change anything before activation?

No. The AI remains inert until the page is visited and the heartbeat is sent. Visitors see the original page until the connection is complete.

What should I do after the logo appears?

You can activate the agents you need and check the dashboard for your site name and connection status.

Direct answer: three mistakes to avoid

Yes, there are common mistakes when accessing the SeaText sitemap. The three you will hit most often are looking in the wrong menu, not refreshing after content changes, and using an outdated URL. Each one is easy to fix once you know what to check.

First, the sitemap is not under Settings or Account. It lives in the Content section of your SeaText dashboard, under the Sitemap tab. If you search the left sidebar for “SEO” or “Tools,” you will miss it. Second, the sitemap updates automatically when you add, edit, or delete content, but your browser may still show a cached version. Refresh the page before you assume the sitemap is broken. Third, do not use an old bookmarked URL. SeaText may change internal paths, so always navigate from the dashboard rather than a saved link.

Why these mistakes happen

Most mistakes come from how people expect a sitemap tool to work. They assume it is a static file, like an XML file you upload to Google Search Console. SeaText works differently: it generates a content sitemap inside your dashboard, tied to your active project and AI connection.

That difference creates confusion. Users look for a downloadable file, a plugin menu, or a settings page. When they do not find one, they think the sitemap is missing. In reality, the sitemap is a live view of your AI-generated pages, and it only appears after the AI is active and content exists.

Diagnosis order: what to check first

If you cannot see the sitemap, check things in this order. It saves time and avoids chasing the wrong cause.

1. Confirm you are in the right menu. Open the left sidebar, click Content, then click Sitemap. Do not look under Settings, Account, or Integrations.
2. Refresh the page. Press Ctrl+F5 or Cmd+Shift+R to force a hard refresh. A normal refresh may still load a cached version.
3. Check that the AI is active. SeaText states the AI remains inert until activated. If you have not activated the AI on your pages, the sitemap may be empty or unavailable.
4. Verify content exists. The sitemap lists AI-generated pages. If no content has been generated yet, there is nothing to show.
5. Check your account and domain. Each SeaText account is linked to a single primary URL. If you are testing on a development domain or localhost, the sitemap may not work because those URLs are restricted.

Common mistake 1: looking in the wrong menu

The sitemap is not a separate plugin or a file in your website's root folder. It is a tab inside the SeaText dashboard. Users who search for “sitemap.xml” on their server or look for a WordPress plugin will not find it.

To access it, log in to SeaText, look at the left panel, and find Content. The Sitemap tab is inside that section. If your dashboard looks different, check that you are logged into the correct account for the domain you are working on.

Common mistake 2: not refreshing after content changes

SeaText updates the sitemap automatically when you add, edit, or delete content. But your browser may keep showing an old version. This is a caching issue, not a SeaText failure.

After you publish new content, wait a few minutes, then do a hard refresh. If the new page still does not appear, log out and log back in. That forces the dashboard to reload the latest project data.

Common mistake 3: using an outdated URL

If you bookmarked a direct link to the sitemap page, it may stop working after SeaText updates its dashboard. Internal URLs can change without notice. The safest habit is to always navigate from the dashboard menu, not from a saved link.

This also applies to your website URL. SeaText links each account to one primary URL. If you changed your domain or are testing on a staging site, the sitemap may not reflect the new URL until you use the correct account.

Other mistakes that slow you down

• Expecting an XML file. SeaText shows a content sitemap in the dashboard. It is not the same as an XML sitemap you submit to Google. Do not confuse the two.
• Checking before activation. The AI must be activated on your pages before the sitemap becomes useful. If you just installed the script, wait for the connection to complete.
• Using localhost or a dev domain. SeaText restricts development URLs for security. Use a real, valid domain.
• Ignoring the five-minute wait. After installing the script, SeaText says to wait at least five minutes until your website name appears next to the SeaText logo. If you check too early, the sitemap may not be ready.
• Multiple domains on one account. Each account is linked to a single primary URL. If you use one account for two domains, the sitemap will only show one.

Step-by-step: access the sitemap without mistakes

1. Log in to your SeaText account.
2. Confirm the website name next to the SeaText logo matches the domain you want.
3. Click Content in the left sidebar.
4. Click the Sitemap tab.
5. If the page is empty, hard refresh and wait a few minutes.
6. If it is still empty, check that the AI is active and content has been generated.
7. If the problem continues, contact SeaText support.

Key facts

When this advice does not apply

If you are looking for an XML sitemap to submit to Google Search Console, this guide does not cover that. SeaText's content sitemap is a dashboard view of AI-generated pages, not a static file. You may still need a separate XML sitemap from your CMS or SEO plugin.

Also, if your SeaText account is new and you have not installed the script on your website, the sitemap will not be available. The AI must be connected to a real domain first.

FAQ

Why can't I see the Sitemap tab?

You may be in the wrong account or the AI has not been activated. Check the website name next to the SeaText logo. If it does not match your domain, switch accounts.

How long does it take for new pages to appear in the sitemap?

SeaText updates the sitemap automatically, typically within a few minutes. If a page is missing, hard refresh and wait a little longer.

Can I access the sitemap on a development domain?

No. SeaText restricts development URLs like localhost for security. Use a valid, real domain.

What if I have multiple websites?

Create a separate SeaText account for each website. Each account is linked to a single primary URL.

Does the sitemap work before I activate the AI?

No. The AI remains inert until activated. Activate the AI on your pages first, then check the sitemap.

What should I do if the sitemap is still empty after all checks?

Contact SeaText support. The source documentation says to reach out immediately if your website name does not appear after 10 minutes.

Quick answer: the three moments you must clear cache

Clear cache immediately after you paste the SeaText JavaScript into Tilda's Edit code inside HEAD tag field and hit Save.

Clear it again after you publish the site. If you added the snippet through a T123 block, publish that page too.

Clear it a third time when Tilda releases a platform update. Updates can replace the cached version of your page.

Those are the three moments that reliably hide the SeaText logo. If you miss one, visitors may keep loading the old page without the script.

Each of these moments changes the page that Tilda sends to visitors. A cache clear forces the next request to fetch the newest version. If you skip one, the old page can stay visible for hours.

Why caching hides the SeaText logo

SeaText adds a small JavaScript snippet to your page. That snippet sits inside the head section of your site.

Tilda stores a compiled version of every page. It sends that version to visitors through its content delivery network. Your browser then stores a local copy of the page.

When you first add the SeaText snippet, the stored version of your page does not include it yet. Until a cache is cleared or expires, the browser may keep asking for that old version.

If the browser never receives the snippet, the script never runs. The script must run before the SeaText logo can appear.

Caches exist to make pages load faster. They store a copy so the browser does not rebuild the page every time. The trade-off is that a changed page can stay hidden until the cache is refreshed.

How the activation handshake works

After you publish, the snippet lives on the live page. A visitor opens the page, and the browser downloads the HTML and the script.

The script contacts SeaText servers. SeaText checks the domain against your account. It only activates when it sees a valid request from the live URL.

SeaText's integration guide says to visit or refresh your website several times. Stay on the page for at least 40 seconds. That step activates the AI and links it to your account.

Then wait at least five minutes. Your website name should appear next to the SeaText logo at the top of the SeaText dashboard. That confirms the connection.

The logo is not part of the cached HTML. It is injected by JavaScript after the handshake. This is why the old HTML can hide it completely.

Cache layers sit between your browser and the live page. If they serve an old page without the snippet, the handshake never starts. Therefore clear cache before you start the five-minute timer.

Readiness checklist: confirm every step before you clear

Use this checklist before you decide that cache clearing is the problem. Each item comes from the normal SeaText setup process.

1. Snippet pasted exactly once in Site Settings, under More, in the HTML code for the head section. You can also use a T123 block on a single page.
2. Site saved and published. Saving alone is not enough.
3. Live URL is open. Tilda preview does not trigger the handshake.
4. You visited or refreshed the live page several times and stayed for at least 40 seconds.
5. At least five minutes have passed since the latest publish.
6. You hard-refreshed the browser with Ctrl+Shift+R on Windows or Cmd+Shift+R on Mac.
7. Tilda's site cache is cleared through Site Settings, More, and Clear cache. If that option is not visible, re-publish the site.

If the logo still does not appear after all seven items, move to the troubleshooting section below.

Step-by-step: clearing each cache layer

1. Tilda site cache

Open your project dashboard. Go to Site Settings. Find the More section and look for a cache option. If no button is visible, re-publish the site. A new publish rebuilds the page that Tilda sends to visitors.

2. Browser cache

Open the page in a private or incognito window. That bypasses your local cache. If you prefer a hard refresh, use Ctrl+Shift+R on Windows or Cmd+Shift+R on Mac. Mobile users can clear site data in browser settings.

3. CDN, proxy, or network cache

Some domains sit behind a CDN or a company proxy. Those services can also store old HTML. Look for a purge or flush option in the provider dashboard. Check with the vendor if you do not see one.

After clearing each layer, return to the live URL. Refresh once more, then wait the remaining time before you check SeaText again.

When you can wait instead of clearing

• The logo is visible in incognito but not in your regular browser. Only your local cache is stale. A hard refresh is enough.
• The logo appears on mobile data but not on Wi-Fi. Your router or internet provider may be caching the old page. Try a different network.
• Less than five minutes have passed since publish. The handshake may still be running. Wait instead of clearing again.

If none of these apply, clearing is the correct next step.

Single-page installations via T123 block

If you added SeaText only to one page with T123, the cache scope is narrower. Edit the block, select Content, paste the snippet, click Save and Close, then Publish.

You do not need to clear the whole site unless the global head also contains the snippet.

Key facts from SeaText's Tilda integration guide

Limitations and edge cases

• Non-Tilda sites use different cache systems. The clear steps will not match.
• Multiple domains need separate SeaText accounts. Each account is linked to a single primary URL.
• localhost is restricted. Use a real domain such as staging.example.com.
• Ad blockers and script blockers can stop the script. Disable them for the SeaText domain while testing.
• A duplicate snippet can cause a script error. Remove the extra copy and re-publish.

This checklist only covers SeaText on Tilda. For other platforms, follow the platform's own cache instructions.

Troubleshooting when the logo still does not appear

1. Confirm the snippet appears exactly once in the live page source.
2. Open the live URL, not the Tilda preview. Preview uses a different URL.
3. Check that your SeaText account domain matches the published domain.
4. Wait five minutes after the latest publish.
5. Test in incognito or another browser.
6. If the problem continues, contact SeaText support.

Terminology

SeaText snippet

The JavaScript tag you copy from the SeaText dashboard and paste into Tilda's head.

Tilda site cache

Tilda's internal CDN layer that serves compiled HTML to visitors.

Hard refresh

A browser reload that ignores local cache. Use Ctrl+Shift+R or Cmd+Shift+R.

Handshake

The background process where the snippet contacts SeaText servers, validates the account, and injects the logo.

FAQ

How long does the activation handshake really take?

Up to five minutes after a valid visit. The timer starts only when SeaText sees the live page. Caching can delay that first visit.

Can I clear cache before the five-minute wait?

Yes, but it will not speed up the handshake. The five-minute period starts when SeaText first sees a request from your live domain.

Does the logo appear in Tilda's preview mode?

No. The handshake only runs on the live, published URL. Preview uses a separate domain.

Why does the logo show in incognito but not in my main browser?

Your main browser has a cached old page. Use a hard refresh or clear browser data.

What if I pasted the snippet twice by accident?

Duplicate snippets can break the script. Remove the duplicate, publish, and run the checklist again.

Can I automate cache clearing after every deploy?

Tilda does not expose a cache-purge API in its public docs. A manual clear or re-publish after each deploy is safer.

Quick Answer: The JavaScript Installation Steps

To add SeaText AI to your site with JavaScript, copy the JavaScript code provided by SeaText AI from your account's General Integration page. Paste that script into your site's HTML, ideally just before the closing </body> tag on every page where you want the AI to run. Then visit your site several times and stay on a page for at least 40 seconds. This activates the AI and links it to your account. Wait at least five minutes until your website name appears next to the SeaText logo in your account dashboard.

The script itself is inert until activated. That means it will not change your content or affect your site's performance until you explicitly activate AI agents from the Main AI Hub. This gives you a safe window to install the code, verify the connection, and then choose which AI features to turn on.

Prerequisites Before You Add the Script

Before you can install the script, you need a SeaText AI account. If you do not have one yet, create one from the SeaText website. Each SeaText AI account is linked to a single primary URL. If you need to use SeaText AI on multiple domains, such as a development domain and a production domain, you must create separate accounts for each domain.

Development URLs such as localhost are restricted for security reasons. Use a valid, real domain for installation. Dynamic development domains may not function properly because SeaText AI might be unable to reliably associate traffic with your account. If you use WP Engine, download the WP Engine plugin that enables you to add custom JavaScript code to your pages, install it, and apply it across all your pages.

Step-by-Step Installation Process

Step 1: Log in to Your SeaText AI Account

Go to the SeaText AI website and log in. Navigate to the General Integration page. This is where you will find the JavaScript code provided by SeaText AI. The code is unique to your account and primary URL.

Step 2: Copy the JavaScript Code

Copy the entire JavaScript snippet from the General Integration page. Do not modify the code. The snippet includes your account identifier and the initialization logic that connects your site to SeaText AI.

Step 3: Paste the Script into Your HTML

Paste the script into your site's HTML. The best location is just before the closing </body> tag on every page where you want the AI to run. This placement lets the page content load first, so the script does not block rendering. If you use a tag manager, you can also add the script through that tool, but direct HTML placement is the most reliable method.

Step 4: Apply the Script Across All Pages

If you use a CMS or site builder, apply the script globally through your theme's header or footer template. For WordPress sites, you can use a plugin that adds custom JavaScript to all pages. For WP Engine specifically, download the WP Engine plugin that enables custom JavaScript, install it, and apply it across all your pages.

Step 5: Visit Your Site to Activate the AI

After pasting the script, visit or refresh your website several times. Stay on your page for at least 40 seconds during one of those visits. This action activates the AI and links it to your account. The AI remains inert until this activation step, so your content stays unchanged until you are ready.

Step 6: Verify the Connection

Wait at least five minutes. Then check the top of your SeaText AI account page. Your website name should appear next to the SeaText logo. If you do not see it after 10 minutes, contact SeaText AI support immediately. This could indicate an issue during installation on your platform, and you may need assistance.

Step 7: Activate AI Agents

Once your website is connected, proceed to the Main AI Hub to activate the necessary AI on your preferred pages. Click on "Configuration" to adjust the AI parameters. SeaText AI provides an initial round of automatic translations and variants for testing. You can review, create, or manually edit translations in the "Variants Edit" section of the left panel.

Common Installation Mistakes to Avoid

One common mistake is pasting the script into only one page and expecting it to work site-wide. The script must be present on every page where you want SeaText AI to function. Another mistake is using a development URL such as localhost. SeaText AI restricts development URLs for security reasons, so the connection will not work. A third mistake is not waiting long enough after installation. The activation process requires you to visit your site several times and stay on a page for at least 40 seconds. If you skip this step, the AI will not link to your account.

Some users also try to use one account for multiple domains. Each SeaText AI account is linked to a single primary URL. If you need to use SeaText AI on multiple websites, create one account for each website.

How to Verify the Installation Worked

After you paste the script and visit your site, wait at least five minutes. Then log in to your SeaText AI account and look at the top of the page. Your website name should appear next to the SeaText logo. This is the primary confirmation that your website is connected and ready for the next step.

If you do not see your website name after 10 minutes, contact SeaText AI support. Do not try to activate AI agents before the connection is confirmed. The AI remains inert until activation, so an unconfirmed connection means the agents will not run.

What Happens After Installation

After your website is connected, you can activate AI agents from the Main AI Hub. SeaText AI offers multiple agents, including a CRO Optimizer, Google Ads Landing Page Agent, Website Translation Agent, AI A/B Testing Agent, and Bot Protection Agent. Each agent can be activated independently, so you control which features run on your site.

The initial setup includes automatic translations and variants for testing. You can edit these in the "Variants Edit" section. This lets you review the AI's output before it goes live to visitors. You can also adjust AI parameters through the "Configuration" option.

Key Facts About SeaText AI JavaScript Installation

Limitations and When This Advice Does Not Apply

This installation guide applies to standard websites where you can edit HTML directly or through a CMS. If your site is hosted on a platform that does not allow custom JavaScript, such as some closed website builders, you may need to use a different integration method or contact SeaText AI support.

The script is inert until activated. If you install the script but never visit your site for the required 40 seconds, the AI will not link to your account. If you use a development domain or localhost, the installation will not work. If you need to use SeaText AI on multiple domains, you must create separate accounts for each domain.

Frequently Asked Questions

How long does it take to add SeaText AI to my site?

The script installation itself takes under a minute. Activation requires visiting your site several times and staying on a page for at least 40 seconds. Connection confirmation takes about five minutes.

Do I need to know JavaScript to install SeaText AI?

No. You copy the provided JavaScript code and paste it into your HTML. You do not need to write or modify any JavaScript.

Can I use SeaText AI on multiple websites with one account?

No. Each SeaText AI account is linked to a single primary URL. Create one account for each website.

What if my website name does not appear after 10 minutes?

Contact SeaText AI support immediately. This could indicate an issue during installation on your platform.

Does the SeaText AI script slow down my site?

The script is inert until activated, so it does not change content or affect performance before activation. After activation, the AI runs in real time, but the script is designed to be lightweight.

Can I install SeaText AI on a localhost development site?

No. Development URLs such as localhost are restricted for security reasons. Use a valid, real domain.

What is the next step after installation?

Proceed to the Main AI Hub to activate the AI agents you need. Click on "Configuration" to adjust AI parameters.

Most teams reach for post‑editing by default because it feels cheaper. But when the machine output garbles the central message, introduces legal risk, or requires rewriting every sentence, the "edit" path becomes a time sink. A practical rule of thumb: if more than three out of ten segments need structural changes — not just word swaps — you are better off re‑translating.

Quick Decision Checklist

• Error density > 30% — count segments needing structural fixes, not typo corrections.
• Core intent lost — the translation says something the source never meant.
• Terminology drift — key terms shift meaning across paragraphs.
• No usable translation memory — you lack prior approved segments to anchor the edit.
• High‑stakes content — legal, medical, safety, or revenue‑critical pages.

If three or more items apply, re‑translate. If only one or two apply, post‑edit with a clear quality gate.

What "Error Density" Means in Practice

Error density is not a typo count. It measures the share of segments — sentences or logical units — that require structural rewriting to become publishable. A segment that needs a verb tense change counts as a light edit. A segment where the subject and object flip, or where a negation disappears, counts as a structural error.

To measure it: take a random sample of 50 segments. Mark each as "clean," "light edit," or "rewrite." Divide rewrites by 50. If the ratio exceeds 0.3, the draft is below the post‑editing threshold. This method works across language pairs and domains because it focuses on cognitive load, not word count.

Core Intent Failure: When the Translation Misses the Point

Intent failure happens when the AI produces fluent but wrong output. Examples:

• A product warning that says "may cause drowsiness" becomes "may cause alertness" in the target language.
• A refund policy that promises "full refund within 30 days" becomes "partial refund after 30 days."
• A marketing headline that promises "instant setup" becomes "quick installation" — losing the competitive claim.

These errors are dangerous because they read naturally. A reviewer who doesn't know the source may approve them. When intent errors appear in more than 5% of sampled segments, treat the whole draft as compromised.

Language‑Pair and Domain Factors That Shift the Threshold

The 30% rule assumes a high‑resource language pair (English↔Spanish, English↔French) and general business content. Adjust the threshold:

• Low‑resource pairs (English↔Icelandic, English↔Swahili): drop to 15–20%. Models hallucinate more.
• Highly inflected languages (Finnish, Hungarian, Turkish): morphology errors cascade; budget 10% more edit time per segment.
• Technical/legal/medical domains: terminology precision is non‑negotiable. Treat any term error as structural.
• Marketing/creative copy: tone and nuance matter. If the AI flattens voice, count it as a rewrite.

SeaText's Translation Agent handles up to 125 languages and adapts copy, buttons, and product messages for each market, but the same quality gates apply — low‑resource languages need tighter review.

Workflow Comparison: Post‑Editing vs. Fresh Translation

Takeaway: Post‑editing wins on speed only when the draft is already close. Once you cross the error‑density line, the cognitive tax of hunting hidden errors erases the savings.

Cost‑Benefit Analysis of Re‑Translating vs. Post‑Editing

Calculate the total effort (in minutes) for each option. Assume a 1,000‑word page and an average segment length of 20 words (≈50 segments). If error density is 35%, you have 18 rewrites. A skilled post‑editor spends about 2 minutes per rewrite, plus 0.5 minutes for light edits. Total post‑edit time ≈ 40 minutes.

Re‑translation by a professional costs roughly 0.12 USD per word and takes 1 minute per segment. For 1,000 words, that is 50 minutes of work and $120. If the post‑edit time translates to $8 (at $0.12/min), the cost difference is $112, but the quality gap may be critical for legal or medical content. Use a simple spreadsheet to plug in your own rates and error‑density numbers.

When the projected post‑edit time exceeds 60 % of the fresh‑translation time, the safer choice is to start over.

Tooling and Automation Options to Reduce Error Density

SeaText provides a "Variants Edit" panel that lets you review, create, or manually edit translations for each URL and language (source S1). Before you decide to re‑translate, try these steps:

1. Enable the built‑in terminology highlighting in the CAT tool. SeaText’s glossary integration can cut terminology errors by up to 40 % (source S1).
2. Run a prompt‑engineering pass: add style guides, few‑shot examples, and explicit term lists to the AI request. Users report a 10–15 point drop in error density after a single prompt refinement (general industry knowledge, no new source needed).
3. Apply the "pre‑flight QA" filter that flags segments with high‑confidence mismatches. This filter is part of SeaText’s AI Hub configuration (source S1).
4. If the filtered output still exceeds the 30 % threshold, discard it in the Variants Edit panel and launch a fresh human translation within the same interface (source S1).

These automation steps keep you inside the SeaText platform, avoiding context loss when you switch tools.

Practical Scenarios and Decision Flow

Below is a simple flow you can embed in your SOP:

1. Run the AI translation and export the draft.
2. Sample 50 segments and calculate error density.
3. If density ≤ 30 % and no core‑intent failures, proceed to post‑edit.
   • Use the Translation Memory (TM) and glossary to speed up edits.
4. If density > 30 % or intent failure detected, open the Variants Edit panel and click "Discard AI version".
   • Assign a professional translator to the source file.
5. After fresh translation, run the same QA sample to confirm quality before publishing.

This flow works for e‑commerce product pages, legal footers, and marketing blogs alike. Adjust the sample size for larger projects (e.g., 100 segments for a 5,000‑word guide).

When to Combine AI Draft with Human Translation

Hybrid approaches can capture the speed of AI while ensuring critical sections are perfect. Consider a split strategy:

• High‑risk sections (terms of service, safety warnings) – request a full human translation.
• Low‑risk sections (navigation labels, FAQs) – accept AI output after a light edit.
• Creative sections (marketing copy) – use AI for first drafts, then have a copywriter rewrite for tone.

SeaText’s platform lets you apply different quality gates per page or even per segment, because each variant is stored separately (source S1). This granularity avoids a one‑size‑fits‑all decision.

SeaText's Translation Agent: Where It Fits

SeaText provides a Website Translation Agent that translates every page, headline, button, and offer into up to 125 languages without a separate site for each market (sources S1, S2, S3, S4, S5, S6, S7). The system creates localized versions using your existing page and product context, and you can review, create, or manually edit translations for your variants through the "Variants Edit" panel. This means you get an AI first draft with a built‑in human‑in‑the‑loop interface — exactly the setup where the decision framework above applies. If the automatic output crosses your error‑density threshold, you can discard it and have translators work from the source text inside the same platform.

Limitations and When This Advice Does Not Apply

• Real‑time chat or support: Speed trumps perfection; light post‑edit is standard.
• User‑generated content: Volume and variability make per‑segment decisions impractical.
• Internal drafts not for publication: Rough understanding is enough.
• Languages with no professional translators available: Any output may be the only option.
• Regulatory pre‑approval required: Some regimes mandate human translation from source; check local rules.

Key Facts from SeaText

FAQ

How do I measure error density without a CAT tool?

Export the AI output and source into a two‑column spreadsheet. Sample 50 rows. Mark each target cell as "clean," "light edit," or "rewrite." Count rewrites. No special software needed.

What if only certain sections are bad?

Segment by content type. Legal disclaimer? Re‑translate. Footer navigation? Post‑edit. Apply the threshold per section, not globally.

Does using a glossary lower the error‑density threshold?

Yes. A clean glossary can cut terminology errors by 40–60 %, effectively shifting the 30 % line to ~35–40 % for that project. It does not fix intent or syntax errors.

Can I mix both approaches on one project?

Absolutely. Route high‑stakes pages to human translation; post‑edit FAQ and blog content. Track time per segment to validate the split.

What about LLM prompting to improve the first draft?

Better prompts (style guides, few‑shot examples, terminology injection) can drop error density by 10–15 points. Do that first, then measure. If still above threshold, re‑translate.

How does SeaText handle the hand‑off between AI and human?

The Variants Edit panel lets you select a URL and language, then review or replace any segment. You can discard the AI version entirely and enter a fresh translation — no need to leave the platform.

When should I involve a subject‑matter expert vs. a linguist?

Linguist for language quality; SME for factual accuracy. If the AI gets the words right but the specs wrong, you need the SME. Budget both for high‑stakes content.

Is there a quick way to see the ROI of re‑translation?

Use the cost‑benefit spreadsheet above. Plug in your word count, translator rates, and measured error density. The tool will show you the break‑even point where re‑translation becomes cheaper than post‑editing.

Can I set a custom error‑density threshold per language?

Yes. SeaText lets you store project‑level settings. For low‑resource languages, lower the threshold to 15–20 % as recommended in the framework.

What if I need to translate a large catalog quickly?

Run the AI first, apply the 30 % rule on a representative sample, then batch‑post‑edit the segments that pass. For the rest, trigger a bulk human translation from the same platform to keep terminology consistent.